DC Current Zero Control for Nulling. Out Jaw/Sensor Offset. SMT Application. Features & Specs DCV: 400/600V±1.0% ACV: 400/600V±1.

Transcription

1 AC/DC MINI Digital Clamp Meter MS 2102 DC Current Zero Control for Nulling Out Jaw/Sensor Offset SMT Application DISPLAY: Digital and Analog Display, 3999 Counts and 42 Segments Bargraph, Digit is 9mm High DCV: 400/600V±1.0% ACV: 400/600V±1.5% DCA: 40A/400A± 2.5% ACA: 40A/400A± 2.0% Max. Diameter for Conductor: Ф28mm RESISTANCE: 400Ω±1.0% DATA HOLD CONTINUITY TEST AUTO RANGE AND MANUAL RANGE POWER: AAA(1.5V)x2 SIZE: 194x72x35 mm WEIGHT: Approx. 210g (including battery) 1

2 Digital Multimeter M 3900 DCV: 200m/2/20/200/1000V±0.5% ACV: 200mV/± 1.2%, 2/20/200V±0.8%, 700V/± 1.2% DC Current: 2μA± 2.0%, 200μ/2m/20mA±0.8%, 200m/2A /± 1.2%, 10A±2% AC Current: 20μA± 3.0%, 200μ/2m/20mA±1.0%, 200m/2A /± 1.8%, 10A±3% RESISTANCE: 200/2k/20k/200k/2M Ω ±0.5%, 20M Ω±1.0%, CONTINUITY TEST: Built in buzzer with sound DIODE CHECK: Test Current 1.0mA, Test Voltage 2.8V hfe: 1~1000 POWER SOURCE: 6F22(9V) x 1 SIZE: 88 x 172 x 36mm WEIGHT: 340g (including battery) DISPLAY: 26 x 60 mm LCD 2

3 Digital Multimeter M 830BZ DCV: 200m/2/20/200V±0.5% : 600V±0.8% ACV: 200/600V± 1.2% DC Current: 2m/20mA± 1.0%, : 200mA±1.5% 10A±3.0% RESISTANCE: 200/2k/20k/200kΩ ±0.8%, 2MΩ±1.0%, CONTINUITY TEST: Built in buzzer with sound DIODE CHECK: Test current 0.8mA, Test voltage 3V hfe: 1~1000 Signal Generator: 50Hz square wave Power source: 6F22(9V) x 1 Size Weight: 70x126x24mm WEIGHT: 170g (including battery) DISPLAY: 15 x 46 mm LCD 3

4 AC Digital Clamp Meter MS 2001 The Clampmeter comes with a very rugged and accurate CT. The Instrument comes in easy to carry Plastic Box. Display: 1999 Counts DCV: 1000V± 1.0% ACV: 750V± 1.0% ACA: 20/200/1000A± 2.0% RESISTANCE: 200/2000 Ω±1.0% DIODE TEST CONTINUITY TEST DATA HOLD BACK LIGHT POWER: BATTERY 6F22 (9V) X 1 SIZE: 250x99x43 mm WEIGHT: Approx. 480g 4

5 AutoRange LCR Meter MS 5300 Designed to international safety standard IEC The over-molding rubber case protec ts the meter to be stronger The test data can be transfer red to PC through an full isolated optical RS232 / USB interface A tilt stand provides position flexibility for viewing and operating the meter SMT application RESISTANCE: 600/6k/60k/600k/6M Ω±1.0%, 60M Ω±1.5% CAPACITANCE: 6nF±2.0%, 60n/600n/6 Ω F±1.0%, 60 Ω /600Ω /6mF±1.5% INDUCTANCE: 600 Ω H±2.5%; 6m/60m/600mH±1.5%; 6H:<4H ±2.8% >4H ±5.0%; 60H:<40H±3.5% >40H Unspecified AUTORANGE AND MANUAL RANGE DATA HOLD MAX. /MIN. VALUE MEASUREMENT AUTO POWER OFF / DISABLE AUTO POWER OFF POWER: 6 (1.5V) (AAA Type) 5

6 3φ Digtal Power Clamp Meter MS φ Power Clamp Meter with RS232 / USB Interface Features: Power Measurement of 3-Phase 3-Wire, 3-Phase 4- Wire, Single-Phase mode V, A, W, VA, VAR, kwh, PF, Hz Measurement Double Display two parameters on each menu and store 28 groups of measurement parameter Measure total power value and five power parameters of each phase in 3-Phase measurement Mode respectively Autorange and TRMS Display With PC RS232 / USB interface and windows graphics software Display measurement time and select tested signal be power supply for the clamp at one time. The instrument can measurement for long time Large LCD Display, Multifunctional button control Specifications: Max Conductor size: Ф50mm AC Current (A) : 40/100/400/1000 A ±2% AC Voltage (V) : 100/300/600 V ±1.2% Active power (kw) : 4/10/40/100/600 kw ±3% Apparent Power (kva) : 4/10/40/100/600 kva ±3% Power Factor (PF) : 0.3 cap to 0.3 ind ±0/02 Reactive power (KVAR) : 4/10/40/100/600 KVAR ±4% Active Energy (kwh) : 10/100/1000/10000 kwh ±3% Frequency (Hz) : 20Hz ~ 1000Hz 0.5% Display : 4 Digit LCD 9999 Power Supply 4X1.5V AA Operating Temperature 0ºC ~ 40ºC Dimensions : 300mmX103mmX51mm Weight : Approx. 500g 7

7 3φ Digtal Power Clamp Meter MS φ Power Clamp Meter with RS232 / USB Interface Features: Power Measurement of 3-Phase 3-Wire, 3-Phase 4- Wire, Single-Phase mode V, A, W, VA, VAR, kwh, PF, Hz Measurement Double Display two parameters on each menu and store 28 groups of measurement parameter Measure total power value and five power parameters of each phase in 3-Phase measurement Mode respectively Autorange and TRMS Display With PC RS232 / USB interface and windows graphics software Display measurement time and select tested signal be power supply for the clamp at one time. The instrument can measurement for long time Large LCD Display, Multifunctional button control Specifications: Max Conductor size: Ф50mm AC Current (A) : 40/100/400/1000 A ±2% AC Voltage (V) : 100/300/600 V ±1.2% Active power (kw) : 4/10/40/100/600 kw ±3% Apparent Power (kva) : 4/10/40/100/600 kva ±3% Power Factor (PF) : 0.3 cap to 0.3 ind ±0/02 Reactive power (KVAR) : 4/10/40/100/600 KVAR ±4% Active Energy (kwh) : 10/100/1000/10000 kwh ±3% Frequency (Hz) : 20Hz ~ 1000Hz 0.5% Display : 4 Digit LCD 9999 Power Supply 4X1.5V AA Operating Temperature 0ºC ~ 40ºC Dimensions : 300mmX103mmX51mm Weight : Approx. 500g 8

8 Harmonic Power Clamp Meter MS 2208 Features: Measuring power, voltage, current, peak value, phase, frequency, power factor, phase angle, and reaction factor, etc. of single-/three-phase circuit; automatic phase sequence testing is possible for 3- phase measurement. True effective value measurement: accurate measurement is possible even with serious distortion in current waveform. Low-consumption high-speed single-chip microprocessor is employed and sophisticated algorithm is applied, as a result, results can be obtained rapidly and precisely, and up to 20 harmonics and distortion value thereof can be measured. Current clamp size 26mm Conform to the IEC Standard CAT. 600V Power supply: 1.5V AAA Battery 3 Dimensions: 208mm 78mm 35mm Weight: about 350 g (with battery) Specifications: Function Range Accuracy AC Voltage(TRMS) 10V~600V (1.0%+5) AC Current(TRMS) Single-phase active power (Min. test current: 10mA; Min. test voltage: 10V) 2mA-3999mA 4A-200A 0.1W-120KW Capacitive (2%+5) (2%+5) (3%+5) (0.02+2) 9

9 Power factor Passive power Inductive 0.1W-120KW 30Hz 1kHz (0.02+2) (3%+5) (0.5%+1) Frequency Harmonic test Harmonic number: 1 Harmonic number: 2-6 (3.0%+10) (3.5%+10) (4.5%+10) Harmonic number :7-8 Harmonic number :9-10 (5.0%+10) (7%+10) (10%+10) Harmonic number :11-15 Harmonic number:

10 Digital Thermometers MS 6500 Features: Display: 1999 Counts, digits is 13mm High Input: K Type Thermocouples Data Hold Power: 6F22(9V)x1 Size: 125.5x72x27mm Weight: Approx. 145g (including battery) Resolution: 1ºC, 1ºF Centigrade: -50~-40ºC±6ºC, -39~-20ºC±5ºC, -19~0ºC±3ºC, 0~500ºC±0.75%, 501~750ºC±1% Fahrenheit: -58~-4F±7ºF, -3~32ºF±4ºF, 32~932ºF±2.0%, 933~1382ºF±1% 11

11 Non-Contact Infrared Thermometers MS 6530A Automatic range Wide temperature measurement Double digital LCD display MAX, MIN, MAX-MIN, average value selectable Back light C / F display selection Single-Spot Laser Sighting Hold function Low batter y indication Auto power off Measurement range -20~850 C - 4 F~1562 F Emissirity 0.95 Field of view 12 : 1 Resolution 0.1 C Display Back light LCD display Laser power <1mW Battery 6F22 (9V ) Over range indication OL or - OL Auto power off 10 Seconds 12

12 Non-Contact Infrared Thermometers MS 6550B Optical Resolution (D:S) (50:1) Wide temperature measurement range Laser target pointer Readout is F & C selectable KTC/infrared thermometers selection Temperature Resolution: 0.1 C or 0.1 F LCD with double temperature display and 4 bits MAX(highest), MIN(lowest), DIF(difference), and average (average) temperature display Emissivity adjustable (0.10 to 1.00) High-temp. and low-temp. alarm. Data recording (record up to 100 group of data) Response time: 500 msec Laser power: Less than 1 milli watt Optical Response: 8µm to 14µm Working Voltage: 9V battery Dimensions: Length 140X56X90 Weight: 500g Function Specifications MS6550B Infrared thermometers Temperature Range -32 ~1650 C(-25 ~ 3000 F) >510 C ±1.5% of the reading 50 ~510 C ±(1.5% of the reading +1 C) 15 ~ 50 C ±(1.5% of the reading + 2 C) -32 ~15 C ±3 C repeat error < 0.5 % of the reading, K-type thermometers Temperature Range -40 ~1370 C ±(1.5% of the reading +1 C) 13

13 Digital Luxmeter MS 6610 Display : 1999 counts, digit is 13mm high Range: 0 ~ 2000Lux±5.0%, 2000 ~ 19990Lux±5.0%, ~ 50000Lux±5.0% Data hold Photo dectector : One silicon photo diode with filter Photo dectector lead length: 150cm (Approx.) Photo dec tec tor size: 83mm x 52mm x 20.5mm Power : 6F22 (9V ) x 1 Size: 125.5mm x 72mm x 27mm Weight: Approx. 180g (including battery) 14

14 Digital Sound Level Meter MS 6700 Features: LCD digital display, Analog bar indicator, wide dynamic range, Auto/Manual range, Fast/Slow response selectable, Max value hold function, A/C weighting selection, Date weighting selection, AC/DC auxilitary output, Backlight, Low power indication Specifications: Measurement range: 30db~130db Accuracy: ±2db Resolution: 0.1 db Display: 3 ½ digits Sample rate: 2 times/s Frequency range: 30Hz~8KHz Over range indication: UNDER or OVER Auxilitary output: AC Vrms at full range for each level, impedance 600Ω DC 10m V/DB, impedance 100Ω Battery voltage: 6x1.5VAAA 15

15 Analog Clamp Meter MS 7160 AC Voltage: 300/600V+ (5% full scale AC Current: 3/12/60/30OA±(5% full scale) Resistance: 2K/200 KQ ±(5% full arc Temperature: -20 to 1 50 C/0 to 300 F(5% full scale) Operating temperature: 0 C up to 40 C atrh< 80% Dimensions: 148x66x36 mm Weight: approx. 160 g incl.battery Power supply: lxl.5v, IEC LR03/AAA IEC61010,CATII 300V 16

16 Multi-Function Process Calibrator MS 7282 This series of process calibrator multimeter is designed with exact current, voltage calibrator function and digital multimeter function, it is used for detecting and debugging automatic control equipment in industry scene. Calibrator 0~22mA ±(0.1% + 5digit) 0~100mV.0~1V±(0.1% + 5digit) 10.00Hz~10.00kHz±5digit Multimeter 0~1000V 0~700V 0~400mA 0~400mA 0~MΩ 0~200.0 µ F 0~5.000MHz Display (LCD) Primary and secondary Display Independently power (24V 30mA) AutoRange Battery Ni-Mh(include charger) 17

17 53000 Counts Bench Digital Multimeter MS 8050 Specification: High End Bench Top, Dual Display Digital Multimeter with RS232 / USB Interface Features: counts measurement ACV(TRMS) /ACV+DCV/dBm and DCV measurements reach up to 1000V 0.01Ω resistance and 1µV voltage resolution Logic frequency /Linear freqency and ducy cycle measurement Max/Min/Max-Min value,relative value,average value measurement VFD display RS232 / USB interface Data hold Data storage function Overload protection Software calibrates automatically Diode and continuity Test ACV measurement freqency response reach up to 20KHz Insulation performance reaching 1000V CAT II Power: 220V/110V AC Size: 350mm X 250 mm X 100mm Weight: approx 2100g Function Range Accuracy DCV ACV DCV+ACV DC Current AC Current Resistance Capacitance 50mV/500mV/5V/50V/500V/1000V 50mV/500mV/5V/50V/500V/1000V 500µA/5mA/50mA/500mA/5A/10A 500µA/5mA/50mA/500mA/5A 10A 50nF/500nF/5µF/50µF/ ±0.03% ±0.5% ±0.15% ±0.75% ±1.5% ±0.1% ±0.5% Logic Freqency Linear Freqency Duty cycle 18

18 MultiRange Digital Multimeter MS 8200G Designed to International Safety Standard IEC CATII 1000V Preventing the Test Leads from connecting wrongly DCV: 200m/2/20/200V±0.5%, 1000V±0.8% ACV: 2/20/200V± 1.0%, 700±1.2% DC Current: 2m/20mA±1.0%, 200mA±1.5%, 10A±2.0% AC Current: 2m/20mA±1.2%, 200mA±2.0%, 10A±3.0% RESISTANCE: 200/2k/20k/200k/2M/20MΩ ±1.0% CAPACITANCE: 2n/20n/200n/2μ/20μF±4.0% TEMPERATURE: -20ºC ~1000 ºC±3.0% FREQUENCY: 20KHz±1.5% CONTINUITY TEST DIODE CHECK POWER: 6F22(9V) x 1 SIZE: 191 x 82 x 36 mm WEIGHT: 280g approx. (including battery) DATA HOLD BACK LIGHT DISPLAY: 1999 Counts, DIGIT is 28mm HIGH 20

19 AutoRange Digital Multimeter MS 8217 Specifications DC Voltage range : 0.1 mv-1000v DC Voltage accuracy: ± 0.5%+3digits) DC Current range: 0.1 u A-l OA DC Current accuracy: ± (1.5%+3digits AC Voltage range: 0. ImV-IOOOV AC Voltage accuracy: ± l.0% + 3digits) AC Voltage Freq. response: 40Hz- 500Hz AC Current range: 0.1 v- A-l OA AC Current accuracy: + l.5% + 3digits) AC Current Freq. response: 40Hz- 200Hz Resistance range: 0.1 Q -40M Q Resistance accuracy: ± 0.5% + 2digits) Capacitance range: 0.01 nf-1 OOF Capacitance accuracy: ± (3.0% + 5digits) Frequency/Duty cycle Range: lohzlookhz Frequency/DutyCycleAccuracy: ± 0. l%+3digits) 21

20 Temperature Range: -55 C-1000 C Temperature Accuracy: ± ( C) Features 4000 counts Diode test/buzzer Temperature Test Frequency/Duty Cycle Relative Measurement Data Hold Hold Auto Power Off Auto/Manual Ranging Double Molded Mechanical/Electronic Protection System Conform to IEC 1010 CAT II 1000V Convenient Fuse/Battery Change Design Battery Life up to 500 Hours Lifetime Warranty 22

21 AutoRange TRMS Digital Multimeter MS 8220R DESIGNED TO INTERNATIONAL SAFETY STANDARD IEC61010-I CAT III 1000V SECONDARY INJECTION MODULDING CASE SMT APPLICATION RS232 STANDARD INTERFACE DISPLAY: 5999 COUNTS. DIGIT IS 2mm HIGH DC VOLTAGE: 6/60/600V ±0.5%, 1000V±0.8% AC VOLTAGE: 6/60/600V ±0.8%, 700V±1.0% DC CURRENT: 600ụ/6000ụ/60m/600mA ±1.2%, 10A±1.5% AC CURRENT: 600ụ/6000ụ/60m/600mA ±1.5%, 10A±2.0% RESISTANCE: 600/6k/60k/600k/6MΩ±1.5% CAPACITANCE: 6nF ±1.8%, 60n/600n/6ụ F±1.0%,60ụ/600ụ/6mF±1.5% FREQUENCE: 6000/60k/600k/6M/60MHz±0.5% TEMPERATURE:-40 C-500 C2.0%,501 C~1000 C±2.9% DIODE TEST CONTINUITY TEST -40 F-932 F2.0%,933 F~1832 F±2.9% AUTORANGE AND MANUAL RANGE DATA HOLD MAX./MIN VALUE MEASUREMENT BACK LIGHT 23

22 MultiRange Digital Multimeter MS 8222H AUTO POWER OFF DATA HOLD BACK LIGHT DISPLAY 1999 COUNTS AND 40 SEGMENTS ANALOG BAR DC VOLTAGE: 200mV/2V/20V/200V ±0.5%, 1000V +0.8% AC VOLTAGE: 200mV/2V/20V/200V ± 1.0%, 700V ±1.2% DC CURRENT: 2mA/20mA ± 1.0%, 200mA ± 1.5%, 10A ±2.0% AC CURRENT: 2mA/20mA ± 1.2%, 200mA ±2.0%, 1 OA ±3.0% RESISTANCE: 200Q/2kQ/20kQ/200kQ/2M Q/20M Q ± 1.0% CAPACITANCE: 2nF/20nF/200nF/2u F/20P F ±4.0% INDUCTANCE: 2mH/20mH/200mH/2H/20H ±3.0% FREQUENCY: 20kHz ± 1.5% CONTINUITY TEST TTL LOGIC TEST TRANSISTOR hfe TEST DIODE TEST 25

23 Digital Multimeter MS 8233C Function Range MS8233C 1 DC Volatge 600V 2V/20V/200V/600V ± 0.5%rdg + 3dgt ± 0.8%rdg + 5dgt ± 1.2%rdg+5dgtJ AC Volatge 2V/20V/200V/600V ± 1.2%rdg+5dgtJ DC Current 2 00 u A/2 ma/20 m A/2 00 ma + [1.0%rdg + 3dgt 200uA/20rnA/200mA I0A + 3.0%rdg + 5dgt] Resistor 200Q/2K/20K V200KO./2M 3 ± 0.8%rdg + 20MO 4dgt Frequency 20KHz ContiniutyCheck V Diode Check V Temperature -20"Cto 1000'C ± 3%rdg + 3dgt] Features Display Battery test Data Hold Back Light Non-Contact Voltaqe Detection Weight Size V V V 23 7g 150mmX70mmX50mm 26

24 High End Digital Multimeter MS 8240D Function Range Accuracy DC Voltage 220mV ±(0.05% +3 ) 2.2/22/220/I000V ±(0.1% +3) AC Voltage 220mV/2.2V/22V/220V/700V 50Hz] ±(0.8% 220mV/2.2V/22V/220V/700V(2KHz) +4 ) +(2.5% +3 ) 220u/2200u/22m 220m/1 OA ±(!%+4 ) DC Current ±(1% +4 ) 220u/2200u/22m 220m/1 OA + 1.5% +3 ) AC Current ±(1.8% +3 J 220/2.2K/22K/220K +(0.8% 2.2M/22M/220MQ +2 ) Resistance +(]% +2 ) Capacitance 22n/220n/2.2u/22u/220u 2.2m/22mF/220mF ±(2.5% +3 ) ±(2.5% +3 ) Frequency 1 Hz ~220MHz ±(0.2% +3 ) Duty 196 to 99% ±( ) Temperature Continuity J Test Diode Test Counts AutoRange and Manual Range DATA HOLD function MAX/min value measurement Full Overload protection Relative measurement Back Light 28

25 MS 8260E Conform to the lec6101o-l Standard CAT.III 1000V CAT. IV 600V Non-contact voltage detect Full Overload Protection Low Battery indication Function characters indication Auto Power Off Data Hold Back Light 30

26 MS 8260G Conform to the IEC Standard CAT.III 1000V CAT. IV 600V Non-contact voltage detect Full OverLoad Protection Low Battery indication Auto Range &Manual Range Rel Function Max/Min Funcrinn MS8260G) Auto Power Off Data Hold Back Light 31

27 MS 8264 Specifications DC Voltage: 200m/2V/20 V/200V/I000V ±0.5% AC Voltage: 200m/2V/20 V/200 V/750V ±0.8% DC Current: 2 ma 20mA/200mA i OA ±1.0% ±2.0% AC Current: 2mA/200mA ±1.0% 1 OA ±3.0% Resistance: 200/2K/20K/200K/2M 3/20MQ ±0.8% 200MQ ±5.0% Capacitance: 2n/20n/200n/2w/20uF ±4.0% 20n/200n/2u/200uF Inductance: 20m H/200m H/2H/20H Frequency: 20KHz Features Back light: Diode test: Hfe test: Continuity checking with buzzer; Temperture: V V V V V 32

28 Smart SMD Tester MS 8910 Features: Display: 3000 counts LCD display. Auto Scanning & Auto Ranging function. Therefore, fully automatic detecting the chip type resistance, capacitance or diode measurement. The construction of tester is compact and small type. So it as portable Testing set. The test leads is special construction and fixed on the main body for convenience of user. Data HOLD function Low-Battery Indication Auto Power OFF. Operating temperature & Humidity: 0 ~ 40 (32 ~104 ) & < 80% RH Storage temperature & Humidity: -10 ~ 50 (14 ~ 122 ) & <70%RH Power supply: 3V Lithium Battery 1pcs. FUNC key is used to selecting any measurement mode. Dimension (L x W x H): 175 x 32 x 19mm 33

29 AC Digital Clamp Meter M 266F Economical Multirange ClampMeter with Frequency Measurement DCV: 2/20/200V±0.5%, 1000V±0.8% ACV: 200V±1.0%, 750V± 1.2% ACA: 200A± 2.5%, 1000A±3% RESISTANCE: 200 Ω/2k Ω /20k Ω /200k Ω /2M Ω ±1.0% FREQUENCY: 2kHz±2.0% DIODE TEST: Check forward or reverse CONTINUITY TEST DATA HOLD: Provided DISPLAY : 1999Counts LCD SIZE: 15 x 47 mm DIMENSION: 96 x 235 x 46 mm WEIGHT: 310g 34

30 Digital Multimeter M 92A DCV: 200m/2/20/200/1000V± (0.5%+3) ACV: 200m/2/20/200/1000V± (0.8%+5) DC CURRENT: 20/200uA/2/20/200mA/2/10A ± (1.0%+5) AC CURRENt: : 20/200uA/2/20/200mA/2/10A ± (1.8%+5) RESISTANCE: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20M ± (0.8%+3) : 200 MΩ±5% CAPACITANCE: 2/20/200nF/2uF/20uF TEMPERATURE: -20ºC ~1000 ºC FREQUENCY: 20KHz DATA HOLD DIODE TEST hfe TEST CONTINUITY CHECKING WITH BUZZER DISPLAY: 1999 Counts AUTO POWER OFF LOW BATTERY INDICATION 35

31 Digital Multimeter M 92A(H) DCV: 200m/2/20/200/1000V± (0.5%+3) ACV: 200m/2/20/200/1000V± (0.8%+5) DC CURRENT: 20/200uA/2/20/200mA/2/10A ± (1.0%+5) AC CURRENt: : 20/200uA/2/20/200mA/2/10A ± (1.8%+5) RESISTANCE: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20M ± (0.8%+3) : 200 MΩ±5% CAPACITANCE: 2/20/200nF/2uF/20uF TEMPERATURE: -20ºC ~1000 ºC FREQUENCY: 20KHz DATA HOLD DIODE TEST hfe TEST CONTINUITY CHECKING WITH BUZZER DISPLAY: 1999 Counts AUTO POWER OFF LOW BATTERY INDICATION 36