TE-7700 Series Radio Frequency (RF) Wireless Room Temperature Sensing System
|
|
- Bryce Rogers
- 6 years ago
- Views:
Transcription
1 te7700.tif TE-7700 Series RF Wireless Room Temperature Sensing System The TE-7700 Series RF Wireless Room Temperature Sensing System consists of a TE-7710 Series RF Wireless Temperature and Set Point Transmitter, and a TE-7720 or TE-7730 Series RF Receiver. Together, these components monitor the temperature set point and zone temperature, and transmit this data to the receiver at predefined intervals. The information is translated into a control signal that works directly with a wide variety of Johnson Controls and compatible competitors digital controllers in Heating, Ventilating, and Air Conditioning (HVAC) systems. The TE-7700 Series RF Wireless Room Temperature Sensing System uses 900 MHz spread-spectrum technology to prevent accidental and unauthorized interference, and to provide better propagation characteristics within the building. Field-addressable DIP switches establish a unique, secure address between each transmitter and receiver. The TE-7700 system provides indication of RF signal strength and low battery. Indication of zone bus communication is also provided on the TE-7720 Series RF Receiver. To optimize comfort in larger zones, a single receiver can average the measured temperature of up to four transmitters in the zone, or select the highest or lowest measured temperature of the zone. Optional signal strength site survey tools are available to determine the appropriate location of the RF wireless temperature sensing system, prior to its installation. These fast-update, 5-second interval tools verify that the RF signal strength is sufficient to ensure proper operation. Refer to the TE-7700 Series Radio Frequency (RF) Wireless Room Temperature Sensing System Product Bulletin (LIT ) for important product application information. te7700s_rf thcc:na Rev: 10/02/02 logo: TE-7700 Series Radio Frequency (RF) Wireless Room Temperature Sensing System Features RF wireless design allows for quick, economical, and low-maintenance installation, reducing total installed cost improved application flexibility provides an alternative to hardwired room temperature sensing counterparts, especially in installations where building aesthetics (such as solid walls or ceilings, temporary walls, or decorative surfaces) would normally hinder hardwiring 900 MHz spread-spectrum technology prevents accidental and unauthorized interference, and provides better propagation characteristics within the building works with Johnson Controls AS-AHU, AS-UNT, AS-VAV, DX-9100, VMA1400, and compatible competitors digital controllers, establishing a new platform for room temperature sensing communications field-addressable DIP switches establish a unique, secure address between each transmitter and receiver multiple transmitter temperature averaging and high/low selection optimizes comfort in larger zones since a single receiver can average the measured temperature of up to four transmitters in the zone, or select the highest or lowest measured temperature of the zone three-level RF signal strength Light-Emitting Diode (LED) integral to the receiver provides visual indication of adequate RF signal strength in nominal 60-second intervals, and minimizes the need for pre-installation signal strength measurements using a site survey tool zone bus activity LED (TE only) provides direct, visual indication of communication between the receiver and the VMA1400 Series Digital Controller low battery indication (via zone bus for TE ; via low battery relay binary output and LED for ) provides battery condition to warn supervisory equipment in advance when the battery needs to be replaced manual occupancy override pushbutton signals the receiver that the zone is occupied, to override time-of-day scheduling one-to-one control approach enhances reliability by reducing susceptibility to signal interference and by preventing a single point of failure in multiiple zone applications nominal 60-second transmissions provide optimal HVAC control, while conserving battery life universal mounting provides added flexibility since the temperature transmitter may be easily relocated after initial installation optional fast-update, 5-second transmission interval signal strength site survey tools (available to determine the appropriate temperature sensing system location prior to installation) provide quick assurance of a strong RF transmission signal for proper operation Applications The TE-7700 Series RF Wireless Temperature Sensing System is ideal for installations where building aesthetics would normally hinder hardwiring. Recommended applications for this RF wireless system are numerous and include the following: museums, historical buildings, atriums, or other sites where building retention and its historical preservation are important office buildings, university campuses, educational facilities, correctional facilities, and other structures that incorporate brick or solid concrete walls and/or ceilings buildings featuring marble, granite, glass, mirrored, wood veneer, or other decorative surfaces that present significant challenges when attempting hardwiring office buildings, retail stores, and other commercial real estate where tenant turnover is frequent and temporary walls and ceilings are common stadiums, arenas, gymnasiums, convention centers, airports, zoos, and other locations that feature large, open spaces buildings containing asbestos walls or other biohazards that cannot be disturbed To Order Specify the code number from the selection chart on the following page. 1/6 left ft: right ft: standard Sect# = 0 seq# = 1
2 te77_matrix.eps Features and Options Ordering Matrices for RF Wireless Transmitters and RF Receivers Selection Chart: Transmitter and Receiver Models Available Code Number TE N (a) TE N (a) TE B (a) TE N (a) TE B (a) TE (b) (b) (a) Includes one 3.0-volt lithium battery. (b) Configured and commissioned using either HVAC PRO software (Release 8.04B or later; AS-AHU, AS-UNT, AS-VAV, and VMA1400 Series Digital Controllers only), or GX-9100 Programming Tool (Release 7.02 or later; DX-9100 Series Digital Controllers only) and GX-9100 Commissioning Tool (Release 8.04 or later; DX-9100 Series Digital Controllers only). Accessories/Repair Parts Code Number RF Wireless Transmitter, No Set Point Adjustment, No Liquid Bulb Thermometer Indication RF Wireless Transmitter, Warmer/Cooler Set Point Adjustment, No Liquid Bulb Thermometer Indication RF Wireless Transmitter, Warmer/Cooler Set Point Adjustment, with Liquid Bulb Thermometer Indication RF Wireless Transmitter, Temperature Set Point Adjustment Scaled 55 to 85 F (13 to 29 C), No Liquid Bulb Thermometer Indication RF Wireless Transmitter, Temperature Set Point Adjustment Scaled 55 to 85 F (13 to 29 C), with Liquid Bulb Thermometer Indication RF Receiver for TE-7710 Series Transmitters, Includes 6 ft (1.8 m) Cable to Connect Power and Zone Bus Interface Between Receiver and Johnson Controls VMA1400 Series Digital Controllers RF Receiver for TE-7710 Series Transmitters, Includes 6 ft (1.8 m) Cable to Connect Power and Analog Interface Between Receiver and Johnson Controls AS-AHU, AS-UNT, AS-VAV, DX-9100, and Compatible Competitors Digital Controllers Duracell Ultra 123, Panasonic CR123A, Toshiba CR123A, GE/Sanyo CR123A, or Equivalent TE TE TE-77DO-601 TE-77DO-602 CBL-STAT25 CBL-STAT50 CBL-STAT75 CBL-STAT100 GRD10A-608 T Replacement Battery (Purchase Locally), 3.0-Volt Lithium Battery (One Required for Transmitter, One Required for Transmitter Signal Strength Site Survey Tool, and Three Required for Receiver Signal Strength Site Survey Tool) RF Wireless Transmitter Signal Strength Site Survey Tool (For Use wiith TE RF Wireless Receiver Signal Strength Site Survey Tool) RF Wireless Receiver Signal Strength Site Survey Tool (For Use wiith TE RF Wireless Transmitter Signal Strength Site Survey Tool) RF Wireless Transmitter Door Replacement Kit with Johnson Controls Logo (10 per Kit) RF Wireless Transmitter Door Replacement Kit without Johnson Controls Logo (10 per Kit) 25 ft (7.6 m) Interface Cable (a) 50 ft (15.2 m) Interface Cable (a) 75 ft (22.9 m) Interface Cable (a) 100 ft (30.5 m) Interface Cable (a) Plastic Guard with Baseplate and Mounting Ring Allen-Head Adjustment Tool (30 per Bag) (a) To connect zone bus between TE-7720 Series RF Receiver and Johnson Controls VMA1400 Series Digital Controllers (does not include power cable). 2/6
3 te7720.eps TE-7710 Series RF Wireless Temperature and Set Point Transmitter, TE-7720 Series RF Receiver with Zone Bus Interface, and Johnson Controls VMA1400 Series Digital Controller 3/6
4 te7730.eps TE-7710 Series RF Wireless Temperature and Set Point Transmitter, TE-7730 Series RF Receiver with Analog Interface, and Johnson Controls AS-AHU, AS-UNT, AS-VAV, DX-9100, or Compatible Competitors Digital Controller HVAC PRO Applications that Support the TE and RF Receivers Application Group Name RF Receiver TE Air Handlers 100% OA Dual Path Dual Duct Hot/Cold Deck Reset Air Handlers 100% OA Dual Path Dual Duct Zone Control Yes Air Handlers 100% OA Dual Path Multizone Hot/Cold Deck Reset Air Handlers 100% OA Dual Path Multizone Zone Control Yes Air Handlers 100% OA Single Path Constant Discharge Air Temperature Air Handlers 100% OA Single Path Exhaust Air Temp Control Air Handlers 100% OA Single Path Room Control Yes Air Handlers 100% OA Single Path Room Control Cooling/Room Reset Heating Yes Air Handlers 100% OA Single Path Supply Air Reset from Zone Temperature Yes Air Handlers MA Dual Path Dual Duct Hot/Cold Deck Reset 4/6
5 HVAC PRO Applications that Support the TE and RF Receivers Application Group Name RF Receiver TE Air Handlers MA Dual Path Dual Duct Zone Control Yes Air Handlers MA Dual Path Multizone Hot/Cold Deck Reset Air Handlers MA Dual Path Multizone Zone Control Yes Air Handlers MA Single Path Constant Discharge Air Temperature Air Handlers MA Single Path Return Air Control Air Handlers MA Single Path Room Control Yes Air Handlers MA Single Path Room Control Cooling/Room Reset Heating Yes Air Handlers MA Single Path Supply Air Reset from Return Temperature Air Handlers MA Single Path Supply Air Reset from Zone Temperature Yes Central Plant Applications Pump Lead/Lag Control Commercial Zoning Applications Damper Assembly (VAV) Yes Commercial Zoning Applications Damper Assembly (VMA) Commercial Zoning Applications Rooftop (UNT) (a) Yes Generic Input/Output Point Multiplexer (b) Yes N2 Dial Applications N2 Dial Module Configuration Rooftop Applications Packaged Rooftop Yes Terminal Unit Applications Fan Coil Yes Terminal Unit Applications Heat Pump Yes Terminal Unit Applications TC Fan Coil Terminal Unit Applications Unit Vent Yes VAV Applications Dual Duct Yes VAV Applications Single Duct Yes VAV Applications VMA Dual Duct VAV Applications VMA Single Duct Yes (a) Only the UNT11xx Series has enough binary inputs to support the battery status for this application. (b) The user must define a sideloop with the appropriate ranging to use the for this application. Interfaces, Applications, and Features for the TE and RF Receivers RF Receiver TE Interface Zone Bus Output 0 to 5 VDC Analog Output Applications (See table above for supported HVAC PRO applications.) Works with Johnson Controls VMA-1400 Series Digital Controllers Works with Johnson Controls AS-AHU, AS-UNT, AS-VAV, DX-9100, and Compatible Competitors Digital Controllers Power On and RF Signal Strength Indication Via RF Signal LED Via RF Signal LED Zone Bus Activity Via Zone Bus LED N/A Zone Temperature Via Zone Bus Via 0 to 5 VDC Analog Output Temperature Set Point Via Zone Bus Via 0 to 5 VDC Analog Output (If Required) Low Battery Indication Via Zone Bus Via Low Battery Relay Binary Output and Low Battery LED Occupancy Status Via Zone Bus Via Occupancy Relay Binary Output (If Required) Specifications Digital Controller Interface Power Requirements Addressing (Transmitter, Receiver, and Site Survey Tools) TE-7700 Series RF Wireless Room Temperature Sensing System TE Power and Zone Bus Interface Between TE RF Receiver and VMA1400 Series Digital Controllers Power and Analog Interface Between RF Receiver and AS-AHU, AS-UNT, AS-VAV, DX-9100, and Compatible Competitors Digital Controllers One 3.0-Volt Lithium Battery Included with Each Transmitter; Battery Life: 36 Months Typical (24 Months Transmitter Minimum); Battery Condition Transmitted Approximately Every 60 Seconds (a) Receiver 24 VAC +10%/-15%, 50/60 Hz, 4.5 VA, Class 2 Transmitter Site Survey Tool One 3.0-Volt Lithium Battery Included with Each Site Survey Tool (a) Receiver Site Survey Tool Three 3.0-Volt Lithium Batteries Included with Each Site Survey Tool (a) DIP Switches, Field Adjustable for Up to 510 Unique Addresses (For addresses 0 and 511, the TE TE matches the N2 address of the associated VMA1400 for its actual address.) DIP Switches, Field Adjustable for Up to 510 Unique Addresses (Addresses 0 and 511 are invalid.) (a) Replacement batteries: Duracell Ultra 123, Panasonic CR123A, Toshiba CR123A, GE/Sanyo CR123A, or equivalent (purchase locally). 5/6
6 System Accuracy Transmitter Sensor Transmitter Temperature Indicator Transmitter Temperature Set Point Transmission Range (Transmitter, Receiver, and Site Survey Tools) Transmissions Receiver Outputs Mounting Hardware Ambient Operating Temperature Limits Specifications TE-7700 Series RF Wireless Room Temperature Sensing System Measured Temperature ±1F (±0.6C ) Over a Range of 55 to 85 F (13 to 29 C); ±1.5F (±0.9C ) Over a Range of 32 to 55 F (0 to 13 C) and 85 to 110 F (29 to 43 C) Temperature Set Point ±1.5F (±0.9C ) Over a Range of 55 to 85 F (13 to 29 C) Internal Negative Temperature Coefficient Thermistor Type Liquid-Filled Bulb Thermometer Range 55 to 85 F or 13 to 29 C Resolution Fahrenheit Scale Graduated in 10F Intervals; Celsius Scale Graduated in 5C Intervals Adjustment Single Temperature, Scaled F/ C Resolution Fahrenheit Scale Graduated in 5F Intervals; Celsius Scale Graduated in 2C Intervals 1 Mile or 5,280 ft (1,609.3 m) Maximum in Open Air; 1,000 ft (304.8 m) Maximum for Indoor Line-of-Sight; 200 ft (61 m) Practical Average Indoors Transmitter Every 60 Seconds (±20 Seconds) Site Survey Every 5 Seconds (±2 Seconds) Tools TE One Zone Bus Output for Temperature, Set Point, Field Strength Measurements, and Low Battery Indication Two Analog Outputs for Zone Temperature and Set Point: 0 to 5 VDC, 2 ma Maximum; Two Binary Outputs for Occupancy and Low Battery Indication: Dry Contacts Rated for 24 VAC, 50 ma Maximum Transmitter Two Expandable Wall Anchors (Preferred Mounting Method) or Double-Sided Adhesive Foam Tape Receiver Four No. 6 Sheet Metal Screws Transmitter and Transmitter 0 to 122 F (-18 to 50 C) Site Survey Tool Receiver and Receiver Site 32 to 122 F (0 to 50 C) Survey Tool Ambient Storage Temperature Limits -40 to 160 F (-40 to 71 C) (Transmitter, Receiver, and Site Survey Tools) Ambient Humidity Limits Operating 5 to 95% RH, Noncondensing (Transmitter, Receiver, Storage 5 to 90% RH, Noncondensing and Site Survey Tools) Materials Compliance Receiver Terminations Cable Between Receiver and Johnson Controls Digital Controller Dimensions (L x W x H) Transmitter and Transmitter NEMA 1 White Plastic Housing Site Survey Tool Receiver and Receiver Site Gray Plastic Housing with UL94-5VB Flammability Rating Survey Tool Intended for NEC Class 2 Connection UL Listed, File E107041, CCN PAZX UL94-5VB Flammability Rating (Receiver Housing is Plenum Rated per UL 1995, Heating and Cooling United States Equipment) FCC Compliant to CFR 47, Part 15, Subpart B, Class A Transmission Complies with FCC Part Regulations for Low Power Unlicensed Transmitters (Transmitter FCC Identification: L2V AX630) Intended for CEC Class 2 Connection UL Listed, File E107041, CCN PAZX7 Canada UL94-5VB Flammability Rating (Receiver Housing is Plenum Rated per CSA C22.2 No. 236, Heating and Cooling Equipment) Industry Canada (Transmitter Industry Canada Identification: IC 279A-TE7710XX) Australia and New Zealand Australia/NZ Emissions Compliant (C-Tick Mark) TE Two Spade Terminals that Accept One Two-Position, Screw-Terminal Pluggable Block (b) TE Eight Spade Terminals that Accept One Two-Position and Two Three-Position, Screw-Terminal Pluggable Blocks (b) 6 ft (1.8 m) Power and Zone Bus Interface Cable Included with Each Receiver; Maximum Recommended Cable Length: 300 ft (91.4 m) Cables to Connect Zone Bus Only (No Power) Measuring 25 ft (7.6 m), 50 ft (15.2 m), 75 ft (22.9 m), and 100 ft (30.5 m) are Available 6 ft (1.8 m) Power and Analog Interface Cable Included with Each Receiver; Maximum Recommended Cable Length: 100 ft (30.5 m) Transmitter and Transmitter 3-3/16 in. x 3-3/16 in. x 1-13/32 in. (81 mm x 81 mm x 36 mm) Site Survey Tool Receiver and Receiver Site 4-23/32 in. x 5-29/32 in. x 1-31/32 in. (120 mm x 150 mm x 50 mm) Survey Tool (b) (a) Pluggable Replacement block(s) batteries: included Duracell with Ultra receiver. 123, Panasonic CR123A, Toshiba CR123A, GE/Sanyo CR123A, or equivalent (purchase locally). 6/6
TE-7700 Series Radio Frequency (RF) Wireless Room Temperature Sensing System
Submittal Bulletin TE-7700 Series Issue Date July 10, 2003 TE-7700 Series Radio Frequency (RF) Wireless Room Temperature Sensing System The TE-7700 Series RF Wireless Room Temperature Sensing System consists
More informationTE-7700 Series Radio Frequency (RF) Wireless Room Temperature Sensing System
Product Bulletin TE-7700 Series Issue Date November 15, 2002 TE-7700 Series Radio Frequency (RF) Wireless Room Temperature Sensing System The Sensing System consists of a TE-7710 Series RF Wireless Temperature
More informationTE Radio Frequency (RF) Receiver with Analog Interface
Installation Instructions TE-7730-0 Issue Date September 24, 2004 TE-7730-0 Radio Frequency (RF) Receiver with Analog Interface Applications The TE-7700 Series RF Wireless Room Temperature Sensing System
More informationTE-7800 Series One-to-One Wireless Room Temperature Sensing System
TE-7800 Series One-to-One Wireless Room Temperature Sensing System Technical Bulletin TE-7820-0, TE-7830-0, TE-7820-1, TE-7830-1 Code No. LIT-12011097 Issued October 4, 2010 Supersedes October 6, 2008
More informationFX-ZFR Series Wireless Field Bus System
Code No. LIT-1900684 Issued December 5, 2014 FX-ZFR1810 Series FX-ZFR Series Wireless Field Bus System Description The FX-ZFR Series Wireless Field Bus System uses ZigBee technology to provide a wireless
More informationWRZ-RMT10K-0 Wireless Remote Temperature Transmitter
WRZ-RMT10K-0 Wireless Remote Temperature Transmitter Product Bulletin WRZ-RMT10K-0, TE-6361A-1, TE-6361V-2, TE-636GV-2, TE-636S-1 The WRZ-RMT10K-0 Wireless Remote Temperature Transmitter is designed to
More informationWireless Zone Sensor
Product Catalog Wireless Zone Sensor Model WZS April 2006 BAS-PRC023-EN 2006 American Standard All rights reserved BAS-PRC023-EN Product Description Overview The Trane Wireless Zone Sensor offers an excellent
More informationWRZ Series One-to-One Wireless Room Sensing System
WRZ Series One-to-One Wireless Room Sensing System Technical Bulletin Code No. LIT-12011641 Issued March 2017 Refer to the QuickLIT website for the most up-to-date version of this document. Document Introduction.......................................................3
More informationViconics VT76x7 Series Rooftop Unit Controllers Engineering Guide Specification
Viconics VT76x7 Series Rooftop Unit Controllers Engineering Guide Specification General The VT76x7 series is designed for single-stage and multi-stage control of heating/cooling equipment such as rooftop
More informationWireless Room Temperature and Humidity Transmitter (Units without Temperature Setpoint or Override) Installation and Operating Instructions
Wireless Temperature and Humidity Overview and Indentification The Wireless Temperature and Humidity measures the room temperature and Relative Humidity and transmits the data at 418MHz or 433MHz RF to
More informationECB-103 BACnet B-ASC 10-Point Programmable Controllers
D a t a s h e e t BACnet B-ASC 10-Point Programmable Controllers Overview The is a microprocessor-based programmable controller designed to control terminal units such as fan coil unit, heat pump unit,
More informationFX-WRZ One-to-One Wireless Sensing System
FX-WRZ One-to-One Wireless Sensing System Technical Bulletin Code No. LIT-12011663 Issued March 2017 Refer to the QuickLIT website for the most up-to-date version of this document. Document Introduction.......................................................3
More informationLRF20CR2BPWH Ceiling MNT Wireless Occ Sensor
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LRF20CR2BPWH Ceiling MNT Wireless Occ Sensor Lutron Catalog Number Manufacturer Description Weight per unit Product Category
More informationWRZ Receiver for One-to-One Wireless Room Sensing Systems
WRZ-7860-0 Receiver for One-to-One Wireless Room Sensing Systems Installation Instructions WRZ-7860-0 24-10563- 47, Rev. E Part No. 24-10563-47, Rev. E Issued January 2017 Applications Refer to the QuickLIT
More informationTaxonomies, Classifications, and Categories Residential dimmers, motion sensors, controls, & photo cells Wireless occupancy/vacancy sensor
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LRF20CR2BPWH Lutron Occupancy Sensor 1 Way FM 434 R2 Lutron Catalog Number Manufacturer Description Weight per unit Product
More informationWireless 900 MHz Receiver
Overview and Identification The 900 MHz unit receives a repeated or re-transmitted RF signal from one or more wireless temperature or humidity transmitters. The signal from the transmitter (418 MHz) is
More informationAllure ECW-Sensor Series
Datasheet Room Temperature Sensors Overview The Allure ECW-Sensor series are wireless and battery-less room temperature sensors specifically designed to communicate with Distech Controls Open-to- Wireless
More informationELECTRONIC THERMOSTAT: T920
μnistδt ELECTRONIC THERMOSTAT: T One analog output DESCRIPTION The T series thermostats are microcomputer-based, proportional and integral (PI) devices with one analog 0 to 0 output. They can be used with
More informationPowPak CCO Module. PowPak CCO Module Energi TriPak Series Wireless Lighting Control
PowPak CCO Module 369433g 1 07.21.16 The PowPak CCO Module is a low-voltage radio frequency (RF) control that provides a single dry contact closure output based on input from Pico controls and Radio Powr
More informationVive PowPak Relay Module with Softswitch
Vive PowPak Relay Module with Softswitch The PowPak Relay Module with Softswitch is a radio-frequency (RF) device that uses Lutron patented Softswitch technology to control general-purpose loads based
More informationPowPak Relay Module. PowPak Relay Module Energi TriPak Series Wireless Lighting Control
PowPak Relay Module Energi TriPak Series Wireless Lighting Control PowPak Relay Module 369549c 1 10.07.14 The PowPak Relay Module is a radio frequency (RF) device capable of controlling up to 5 A of general-purpose
More informationPowPak Relay Module with Softswitch
PowPak Relay Module with Softswitch The PowPak Relay Module with Softswitch is a radio frequency (RF) device that uses Lutron patented Softswitch technology to control up to 16 A of general-purpose load
More informationRadio Powr SavrT Occupancy / Vacancy Sensor
369480c 1 01.25.13 Radio Powr SavrT Occupancy / Vacancy Sensor LutronR Radio Powr SavrT occupancy/vacancy sensors are wireless, battery-powered passive infrared (PIR) sensors that automatically control
More informationWireless Rain and Wireless Rain/Freeze Sensor
Wireless Rain and Wireless Rain/Freeze Sensor Installation and Operating Instructions for: WRC: Wireless Rain Sensor Combo WRT: Wireless Rain Sensor Transmitter WSR: Wireless Rain Sensor Receiver WRFC:
More informationWireless Ceiling Mount Sensor
Wireless Ceiling Mount Sensor Lutron s occupancy and vacancy sensors are wireless ceiling-mounted battery-powered passive infrared (PIR) sensors that automatically control lights via RF communication to
More informationHARDWARE GUIDE. FlexIO Controller M2000 Series. Specifications and Operational Guide
HARDWARE GUIDE FlexIO Controller M2000 Series Specifications and Operational Guide www.proloncontrols.com info@proloncontrols.com 17 510, rue Charles, Suite 100, Mirabel, QC, J7J 1X9 REV. 6.2.3 PL-HRDW-FLX-M2000-EN
More informationERM-DA. Installation Guide
ERM-DA Installation Guide ERM-DA Product Overview Echoflex s ERM-DA is an active circuit transmitter that provides a low cost method of using a live electrical circuit as a switch. When the circuit is
More informationRadio Powr SavrTM Wireless Occupancy / Vacancy Ceiling Sensor
Radio Powr SavrTM Wireless Occupancy / Vacancy Sensor Lutron Radio Powr SavrTM occupancy/vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights
More informationECL-VAV-N. Features & Benefits
D a t a s h e e t ECL-VAV-N Overview The ECL-VAV-N controller is a microprocessorbased programmable variable air volume (VAV) controller designed to control any variable air volume box. This controller
More informationPowPak Dimming Module with EcoSystem
PowPak Dimming Module with EcoSystem 369-427f 1 04.03.12 The PowPak Dimming Module with EcoSystem is a radio frequency (RF) control that operates up to 32 EcoSystem ballasts based on input from controls
More informationOPERATING INSTRUCTIONS ARE ON PAGE 5. SECTION 2 Technical Data Transmitter Unit. RVHT 2 MULTI-FIT Programmable R/F Thermostat-Pair SECTION 1
OPERATING INSTRUCTIONS ARE ON PAGE 5 RVHT 2 MULTI-FIT Programmable R/F Thermostat-Pair SECTION 1 This Programmable Ravenheat R/F controlled room Thermostat RVHT 2, consists of 2 items: a Mobile Transmitter
More informationUN2 - Universal controller Building automation s missing link
Building automation s missing link Introduction A flexible line of controllers that allows facility managers, contrac - tors and OEM manufacturers to deploy integrated solutions for HVAC, lighting, and
More informationPowPak relay module with Softswitch, 16A general purpose. Switch, 120/277V, Vive Enabled. switch, 120/277V, Vive enabled
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 RMJS16RDVB Relay Module Lutron Catalog Number Manufacturer Description Weight per unit Product Category Features amperage
More informationVive PowPak Relay Module with Softswitch
Vive PowPak Relay Module with Softswitch The PowPak Relay Module with Softswitch is a radio-frequency (RF) device that uses Lutron patented Softswitch technology to control general-purpose loads based
More informationHLC-1000 High-limit Humidity Control
FANs 216, 1628.3 Product/Technical Bulletin HLC-1000 Issue Date 1197 HLC-1000 High-limit Humidity Control The HLC-1000 is designed to limit duct humidity by comparing a controller s request for humidification
More information14 ANT-NP1 Non-penetrating Mast Antenna Kit 1 Section para " X 18" Wire Guard for 16" Clocks 2 Section para 2
SHELBY Item Part Number Qty Spec Comments Shelby Primex Clocks 14 14000e Primex Transmitter Package ew External Antenna 1 Section 275313 - para 2 15 14155 12.5" Traditional Series Black Clock 93 Section
More informationW I R E L E S S L I N E C A R D
WIRELESS LINECARD WIRELESS ACI s wireless product line is based on MESHNET 900 TM MHz Spread Spectrum Mesh Network Technology. It provides the HVAC Industry a much needed option for a proven, reliable,
More informationTEC Series Wireless Thermostat Controller System for Fan Coil and Zoning Equipment
TEC Series Wireless System for Fan Coil and Zoning Equipment Product Bulletin Code No. LIT-12011401 Issued June 4, 2009 Supersedes October 6, 2008 The TEC Series Wireless System provides wireless networked
More informationTEC Series Wireless Thermostat Controller System for Staged Equipment
TEC Series Wireless System for Staged Equipment Product Bulletin TEC2001-3, TEC2002-3, TEC2003-3, TEC2004-3 Code No. LIT-12011400 Issued June 4, 2009 Supersedes March 25, 2009 The TEC Series Wireless System
More informationLazerpoint TM RF RX-91 Basic Receiver Installation Instructions
Lazerpoint TM RF RX-91 Basic Receiver Installation Instructions Ver. 1.01 Section 1 General Description Camden Lazerpoint Radio Controls comprise the following models: - CM-TX-9 Wall switch ready transmitter
More informationWireless CO 2. + TRH Sensor. Installation Guide. Version 1
Wireless CO 2 + TRH Sensor Installation Guide Version 1 2 CO2 + TRH Sensor Installation Guide Introduction The wireless CO 2 + TRH (Carbon Dioxide + Temperature and Relative Humidity) sensor is a wall
More informationWireless Temp/Setpoint & Override Room Transmitter
Overview The BAPI Wireless Combination Transmitter measures the room temperature and relative humidity and transmits the data at 418MHz or 433MHz RF to a receiver. Temperature setpoint and override button
More informationWireless Ceiling Mount Sensor for Occupancy / Vacancy Detection INSTALLATION GUIDE
MOS-IR/DT Wireless Ceiling Mount Sensor for Occupancy / Vacancy Detection INSTALLATION GUIDE This guide covers all models of MOS-IR and MOS-DT ceiling occupancy sensor. The MOS-IR product family includes:
More informationPowPak Relay Module with Softswitch
PowPak Relay Module with Softswitch The PowPak Relay Module with Softswitch is a radio-frequency (RF) device that uses Lutron patented Softswitch technology to control general-purpose loads based on input
More informationPowPak Relay Module with Softswitch
PowPak Relay Module with Softswitch The PowPak Relay Module with Softswitch is a radio-frequency (RF) device that uses Lutron patented Softswitch technology to control general-purpose loads based on input
More informationHome Automation, Inc. Model 12A00. Wireless Receiver. Installation Manual
Home Automation, Inc. Model 12A00 Wireless Receiver Installation Manual Document Number 12I00 Rev D August, 2002 CONTENTS DESCRIPTION...1 COMPATIBLE TRANSMITTERS...1 INSTALLATION...2 OPERATION...3 SETUP
More informationWireless multizone receiver RDE-MZ6
s 1 428 Wireless multizone receiver RDE-MZ6 for floor heating / zone heating systems Mains-powered RDE-MZ6 multizone wireless receiver (AC 230 V) DIN rail mounting 2-position control with On/Off output
More informationUniversal Controller
Universal Controller Overview and Configuration Manual Overview... 1 About this Manual... 1 Introduction... 5 Hardware Overview... 5 Software Overview... 7 Interpreting Flow Diagrams... 8 Foreign Language
More informationLAZERPOINT RF WIRELESS DOOR ACTIVATION SYSTEM
RF TRANSMITTERS & RECEIVERS LAZERPOINT RF WIRELESS DOOR ACTIVATION SYSTEM CM-TXLF SERIES LAZERPOINT RF WIRELESS DOOR ACTIVATION SYSTEM Lazerpoint RF by Camden Door Controls is the industry s most advanced
More informationMx-RPW Room Control Module (Built-In Occupancy Sensor)
Wireless Room Controller Application Solar-powered, self-learning room sensor with LCD and smart communication management for measuring room temperature, independent generation of utilization time profiles
More informationQPM Series Indoor Air Quality Duct Sensors
Document No. CE1N1962 QPM Series Indoor Air Quality Duct Sensors Description The QPM Series Room Carbon Dioxide (CO 2 ) and Air Quality Duct Sensors are designed for applications where precise, stable
More informationLAZERPOINT RF WIRELESS DOOR ACTIVATION SYSTEM
DOOR ACTIVATION DEVICES RF TRANSMITTERS & RECEIVERS LAZERPOINT RF WIRELESS DOOR ACTIVATION SYSTEM CM-TXLF SERIES LAZERPOINT RF WIRELESS DOOR ACTIVATION SYSTEM Lazerpoint RF by Camden Door Controls is the
More informationWRZ-RMT10K-0 Wireless Remote Temperature Transmitter
Transmitter Installation Instructions WRZ-RMT10K-0, TE-6361A-1, TE-6361V-2, TE-636GV-2, TE-636S-1 24-10332- 61, Rev. G (barcode for factory use only) Part No. 24-10332-61, Rev. G Issued March 2017 Application
More informationWIRELESS TEMPERATURE S TATION I NSTALLATION MANUAL
Wireless Temp Page 1 Thursday, December 7, 2000 2:09 PM WIRELESS TEMPERATURE S TATION I NSTALLATION MANUAL The Wireless Temperature Station is for use with Wireless Vantage Pro TM. COMPONENTS The Wireless
More informationELECTRONIC THERMOSTAT: T951
μnistδt ELECTRONIC THERMOSTAT: T9 One floating output One contact output DESCRIPTION The T9 series thermostats are microcomputer-based, proportional and integral (PI) devices with one floating (incremental)
More informationTOP VIEW. 6.75" (171.5mm) Network ID Selector. Input Voltage Selection Jumper 7.285" (185mm) Battery Positive Terminal SIDE VIEW. 6.12" (155.
Installation and Operation Instructions RR2552 Spread Spectrum Repeater TOP VIEW 6.75" (171.5mm) Network ID Selector Ø0.190 (4 PLCS.) Data Link LED 3.5" 4.72" (88.9mm) (119.89mm) Active LED Battery Positive
More informationR PROFLAME Instruction Book Collection
9.956.028 R00 584 PROFLAME Instruction Book Collection 4-17 18-29 584 PROFLAME System 30-39 Appendix: DIP SWITCH NUMBER (0=ON 1=OFF) 40-41 4-17 Fig. 1 The SIT is a device that allows, in conjunction with
More informationSECTION GPS WIRELESS CLOCK SYSTEMS
PART 1 GENERAL 1.1 SECTION INCLUDES A. G.P.S. Receiver B. Primary Transmitter C. Satellite Transmitter D. Analog Clocks E. Digital Clocks 1.2 REGULATORY REQUIREMENTS SECTION 27 53 13 GPS WIRELESS CLOCK
More informationPros & Cons of Wireless
Copyright 2002 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. This posting is by permission of ASHRAE Journal. This article may not be copied and/or distributed electronically
More informationW7100A-E Discharge Air Controller
W7100A-E W7100A-E Discharge Air Controller The microprocessor based W7100 Discharge Air Controller maintains an average discharge air (DA) temperature in variable air volume (VAV) cooling systems by modulating
More informationWireless HVAC Sensors
Rev. 02/15/11 Wireless Overview l 8 Year Battery Life l Temperature Only or Temperature/Humidity Combination l 100 Foot In-Building Range, Extendable to 1,000 Feet with Repeater* l Transmitted signals
More informationTABLE OF CONTENT A. Installation and Mounting Installation 3 2. Mounting Receiver Addressing... 5 B. Key Interface. 7 C.
TABLE OF CONTENT A. Installation and Mounting.. 3 1. Installation 3 2. Mounting.. 4 3. Receiver Addressing... 5 B. Key Interface. 7 C. LCD Interface...8 D. Start/Reset...9 E. Operation Mode.10 F. Time
More informationInstallation Instructions
CD-W00-x0-1 Series Wall Mount CO 2 Transmitters Installation Instructions CD-W00-00-1, CD-W00-N0-1 Part No. 24-9601-94, Rev. E Issued August 14, 2014 North American Emissions Compliance United States This
More informationPowPak Dimming Module with. EcoSystem. PowPak Dimming Module Energi TriPak Series Wireless Lighting Control
PowPak Dimming Module with 369427j 1 08.19.16 The PowPak Dimming Module with is a radio frequency (RF) control that operates up to 32 Ballasts / LED drivers based on input from controls and Radio Powr
More informationDDC Series Dial Digital Controller INSTALLATION AND OPERATING INSTRUCTIONS
DDC Series Dial Digital Controller INSTALLATION AND OPERATING INSTRUCTIONS Thank you for choosing the Toro DDC (Digital Dial Controller) irrigation controller. The DDC incorporates the lates programming
More informationwww.greenelectricalsupply.com Wireless Wall-Mount Sensor Lutron wall-mounted occupancy and vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights
More informationOccupancy Sensors for High-Bay Applications
Wired for High-Bay Applications for High-Bay Applications 369606b 1 12.08.2017 Features Surface-mount and end-mount models available. 180 and 360 coverage lenses available. Low-voltage, passive infrared
More informationRoom Temperature Controllers. for heating and cooling systems
3 048 RCU15 Room Temperature Controllers for heating and cooling systems RCU15 Choice of two-position or modulating PI control ON / OFF or PWM outputs for heating and cooling Control depending on room-
More informationAmbient Weather WS-07 Wireless Indoor/Outdoor 8-Channel Thermo-Hygrometer with Jumbo Display User Manual
Ambient Weather WS-07 Wireless Indoor/Outdoor 8-Channel Thermo-Hygrometer with Jumbo Display User Manual Table of Contents 1 Introduction... 2 2 Getting Started... 2 2.1 Parts List... 2 2.2 Recommend Tools...
More informationEN4216MR 16 Zone Multi-Condition Receiver with Relay Outputs Installation and Operation Manual
EN4216MR 16 Zone Multi-Condition Receiver with Relay Outputs Installation and Operation Manual 1 Overview The EN4216MR receiver allows you to add up to 16 transmitters and five outputs to any application,
More informationPowPak Dimming Module with. EcoSystem. PowPak Dimming Module Energi TriPak Series Wireless Lighting Control
PowPak Dimming Module with 369427g 1 07.18.13 The PowPak Dimming Module with is a radio frequency (RF) control that operates up to 32 Ballast / LED drivers based on input from controls and Radio Powr Savr
More informationSF Series. 900 MHz Wireless Switch Follower/Remote Control Receiver (with On-Board 10-Amp Relays) Typical Applications
Long Range Wireless Applications 900 MHz Wireless Switch Follower/Remote Control Receiver (with On-Board 10-Amp Relays) The switch followers are a two way system designed to provide a quick and cost effective
More informationBattery Powered People Counter with Integral LCD Display & 418Mhz Data Transmitter
Battery Powered People with Integral LCD Display & 418Mhz Data Transmitter The SenSource PCW-TB06 is a battery powered people counter with 418Mhz RF wireless data transmitter. Truly wireless installation
More informationENGLISH S-CO2 AMBIENT AIR SENSOR INSTALLATION AND OPERATING INSTRUCTIONS CO 2. TF5701_B_v1_web
S-CO2 CO 2 AMBIENT AIR SENSOR INSTALLATION AND OPERATING INSTRUCTIONS ENGLISH TF5701_B_v1_web 1 DESCRIPTION This module measures carbon dioxide (CO 2 ) in the range of 0 to 2 000 ppm and is equipped with
More informationEMI Installation Guidelines
EMI Installation Guidelines Although Red Lion Controls Products are designed with a high degree of immunity to Electromagnetic Interference (EMI), proper installation and wiring methods must be followed
More informationIntelligent Compact Controller
TCY-T0121 Intelligent Compact Controller Features Temperature control for 2-pipe, 4-pipe HVAC systems. Temperature range from 40 to 140 C. 1 independent PI and On/Off control loop to control temperature.
More informationCD-Pxx-00-0 Series Duct Mount CO 2 Transmitter
Installation Instructions CD-Pxx-00-0 Issue Date February 4, 006 CD-Pxx-00-0 Series Duct Mount CO Transmitter Application Requirements FCC Compliance Statement This equipment has been tested and found
More informationProduct Catalog: Europe
Product Catalog: Europe Table of Contents Market Solutions 1 Commercial Security 2 Commercial Monitoring Transmitters 3 Pendant 4 Universal 5 Commercial Monitoring 6 Specialized 7 Motion Detector Receivers
More information905U Wireless. New Products... New Solutions. The wireless alternative to expensive cabling... Simple but Reliable. Easy to Use
Wireless New Products... New Solutions The range of telemetry modules provide remote monitoring and control by radio or twisted-pair wire, over short or long distances. Transducer signals connected at
More informationJUMO Wtrans Receiver with Wireless Data Transmission
Data Sheet 902931 Page 1/10 JUMO Wtrans Receiver with Wireless Data Transmission k For measuring temperature, pressure, potentiometer, and voltage. k Interface RS485 with Modbus protocol k Wireless measured
More informationAccutech AM20. Wireless acoustic monitor field unit
Accutech AM20 Wireless acoustic monitor field unit 1 The Accutech AM20 wireless acoustic monitor field unit monitors pressure relief valves, steam traps, automatic tank cleaning (CIP) systems, and other
More informationFX-WRZRMT10K-0 Wireless Remote Temperature Transmitter
FX-WRZRMT10K-0 Wireless Remote Temperature Transmitter Installation Instructions FX-WRZRMT10K-0, TE-6361A-1, TE-6361V-2, TE-636GV-2, TE-636S-1 Application The FX-WRZRMT10K-0 Wireless Remote Temperature
More informationFrequently Asked Questions
Frequently Asked Questions This document provides a non-exhaustive collection of some of the questions frequently asked by our customers. What is your system s wireless range? 1 What are the risks of interference
More informationThe wireless alternative to expensive cabling...
The wireless alternative to expensive cabling... ELPRO 905U Wireless Solutions for Process Applications New Products... New Solutions The ELPRO 905U range of wireless I/O provides a low cost alternative
More informationHEC-45LTN-45PFAS Rev A
A. Features High Efficiency (Up to 85%). Active Power Factor Correction (Typical 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP. Fully isolated plastic case with IP20 and dry location. Class
More informationSF C-Series. 900 MHz Wireless Switch Follower/Remote Control Receiver (with On-Board 10-Amp Relays) Typical Applications
Long Range Wireless Applications 900 MHz Wireless Switch Follower/Remote Control Receiver (with On-Board 10-Amp Relays) The SF900C Series Remote Control/Switch Followers are a twoway system designed to
More informationVive Integral Fixture Controls
3691039e 1 05.21.18 This device is designed to operate as part of a Vive lighting control system. If used in a standalone (non-system) application functionality is limited to default settings. The Vive
More informationRolyan Splint Pan OPERATION MANUAL. Item # Small Item # Large
Rolyan Splint Pan OPERATION MANUAL Item #081544816 - Small Item #081544808 Large PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW SPLINT PAN. Failure to follow these instructions could result in
More informationNon-Spring Return DuraDrive Modulating Actuator
MS41-60xx Series n-spring Return DuraDrive Modulating Actuator The DuraDrive direct coupled 24 Vac non-spring return rotary electric actuators are designed for modulating control of dampers. S41-60xx ries
More informationSmartZone-2 & SmartZone-4
SmartZone-2 & SmartZone-4 Quick-Start Guide UPDATED 2011-7-26 This guide is intended to give the installer a brief set of instructions about how to set up the XCI Zoning SmartZone System. For more detailed
More informationGuidance and Declaration - Electromagnetic Compatibility (EMC) for the Delfi PTS ii Portable Tourniquet System
Guidance and Declaration - Electromagnetic Compatibility (EMC) for the Delfi TS ii ortable Tourniquet System Guidance and manufacturer s declaration electromagnetic emissions The TS ii ortable Tourniquet
More informationCONTENTS OF THE BOX. *PIR sensor only **Dual Technology and PIR sensors only. Description PIR Ultrasonic Dual Technology
Instruction Bulletin 63249-420-283A4 08/2009 Wall Mount Occupancy Sensor SLSWPS1500, SLSWUS1500, SLSWDS1500 INTRODUCTION Wall Mounted Occupancy Sensors are Class 2 devices ideal for use in business or
More informationThe wireless alternative to expensive cabling...
The wireless alternative to expensive cabling... ELPRO 905U Wireless Solutions for Process Applications New Products... New Solutions The ELPRO 905U range of telemetry modules provide remote monitoring
More information3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)
FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W
More informationSE7000 Series Application guide
SE7000 Series Application guide Control Performance Energy savings Better building management About Schneider Electric As a global specialist in energy management with operations in more than 100 countries,
More informationEN4232MR 32 Zone Multi-Condition Receiver with Relay Outputs Installation and Operation Manual
EN4232MR 32 Zone Multi-Condition Receiver with Relay Outputs Installation and Operation Manual 1 Overview The EN4232MR receiver allows you to add up to 32 transmitters and 11 outputs to any application,
More informationSE3401. Installation Instructions Wireless (RF) Point Tracking Transmitter
SE340 EN Installation Instructions Wireless (RF) Point Tracking Transmitter SE340 Installation Instructions.0 General Information EN.0 General Information The SE340 Point Transmitter is a magnetic and
More informationMetasys Zoning Package Commissioning
Technical Bulletin Issue Date 11/01/01 TECHNICAL BULLETIN Metasys Zoning Package Commissioning Metasys Zoning Package Commissioning...2 Introduction... 2 Key Concepts... 3 HVAC PRO Software...3 Configuration
More informationWIRELESS 868 MHz TEMPERATURE STATION Instruction Manual
WIRELESS 868 MHz TEMPERATURE STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this temperature station with wireless 868MHz transmission. It not only displays the indoor temperature
More informationv3 360 Passive Infrared Line Voltage Occupancy Sensor
SPECIFICATIONS CI-355 v3 360 Passive Infrared Line Voltage Occupancy Sensor with Light Level feature Voltages... 120//230/277/347VAC, 50/60Hz Load Ratings @120VAC...0-800W Ballast/Tungsten/LED @230VAC
More information