Liquid and Bulk Solids Level

Transcription

1 Liquid and Bulk Solids Level THE GLOBAL LEADER IN LEVEL DETECTION K-TEK Instruments (Pty) Ltd. K-TEK Level Eng. Pvt. Ltd. K-TEK (Tianjin) Level Co., Ltd. K-TEK BV K-TEK Solids Level K-TEK Corp.

2 AT200 Magnetostrictive shown with KM26S MAGNETIC LEVEL GAUGES & ACCESSORIES World s FIRST * SIL2 Certified Magnetostrictive MW05 Dual Chamber Level System n Redundant level measurement - Guided Wave Radar (GWR) - Magnetostrictive n Low cost of ownership n 5 year warranty n Highly visible indication Electric Switch n Hazardous area rating: FM approved and CSA Certified n Enclosure: hermetically sealed/explosion proof, NEMA 4x/IP56, ½ FNPT n Switching mechanism: reed, AC/DC 1 amp, max process temp 600 F (316 C) with IP option, 1/8 deadband, SPDT Magnetic Liquid Level Gauge Benefits: n Low cost of ownership n Safe and simple installation n 5 year warranty n High visibility Configurations: n High pressure (4500 psi) n High temperature (1000 F) n Extruded outlets n Engineered floats (>0.25 SG) Electric Switch n Hazardous area rating: FM approved and CSA Certified n Enclosure: stainless steel/explosion proof, NEMA 4x/Ip56, ¾ FNPT n Switching mechanism: cam driven, snap-action; AC:10 amp DC: ½ amp; min process temp -60 F (-51 C) and max process temp 300 F (149 C), 600 F (316 C) with IP option; 13/16 deadband, DPDT n For high-temperature, vibration and high-corrosive applications AccuTrak AT200 Compact Magnetostrictive *SIL2 certification valid only at Prairieville manufacturing facility. Electric Switch (Dual Compartment Housing) n Hazardous area rating: FM approved; CSA and ATEX Certified n Enclosure: stainless steel, dual compartment, hermetically sealed, explosion proof; NEMA 4x/IP56; ½ FNPT n Switching mechanism: cam driven, snap-action; AC: 10 amp DC: 2.6 amp; min process temp -320 F (-195 C) with option and max process temp 300 F (149 C), 1000 F (538 C) with IP option; 15/16, DPDT n For high-temperature, vibration and high-corrosive applications

3 MAGNETOSTRICTIVE LEVEL TRANSMITTERS World s FIRST * SIL2 Certified Magnetostrictive AT200 Magnetostrictive shown with KM26S Magnetostrictive Liquid n Dual compartment housing with separate field terminal compartment n Pressure to 3000 psi (207 bar), Std psi (124.1 bar) n Temperature range: -320 F to 800 F (-196 C to 427 C) with options n HART protocol or Honeywell DE communications available Magnetic Level Gauge Magnetostrictive Level Transmitter n Designed to mount externally to K-TEK s KM26 or other magnetic level gauges n High accuracy:.01% of full scale n Superior piezo ceramic sensor (patent #5,473,245) n Never requires recalibration: set it and forget it Compact Magnetostrictive Liquid for Direct Insertion n High accuracy -.02% n Loop powered to 16ft (5m) probe length n High resolution 4-20 ma output n High accuracy -.02% Compact Magnetostrictive Liquid for Non-Contact n Designed to mount externally to K-TEK KM26 or other magnetic level gauges n High resolution 4-20 ma output n Suitable for high temperature applications n Calibrates without opening enclosure *SIL2 certification valid only at Prairieville manufacturing facility. AccuTrak AT600 Compact Magnetostrictive Level Transmitter

4 GUIDED WAVE RADAR TRANSMITTERS Dual compartment Modular electronics State-of-the-Art Loop Powered, 4-20mA Output GWR Transmitter for Liquid Level Applications n SIL2 Suitable n Reliable level measurement over varied process conditions n Distance 2 to 100 ft. (30 m) n Temperatures to 800 F (427 C) n Pressures to 5000 psi (344 bar) Glass window cover External chamber used for side tank mounting High temperature extension State-of-the-Art Loop Powered, 4-20mA Output GWR Level Transmitter for Level and Interface Applications n SIL2 Suitable n The MT5100 provides both lower and upper level fluid indications n Flooded or non-flooded chambers n Transmission of interface and upper fluid Signals with the use of the optional RI100 repeat indicator transmitter n Detection of the presence of a rag layer (patent pending) Coaxial probe with slotted groove design provides maximum signal strength without the use of an external chamber Centering disc WaveForm display allows engineer/technician to view measurements in real-time

5 Two Dimensional Laser Scanner for Non-Contact Volumetric Measurement of Belt Conveyed Materials n Non-contact belt scale n Simple installation during conveyor operation n Non-contact conveyor volume and speed measurement n No routine maintenance or calibration LM80 with 4 Tri-Clover Quick disconnect food processing and beverage industry LM80 with 4 Tri-Clover and Heated Optic food processing/beverage and pharmaceutical industry LASER TRANSMITTERS LM80 with Heated Optic water treatment and chemical industry Dust tubes are available in stainless steel or aluminum for dust protection and long-term reliability Versatile, Intermediate Range Laser Level and Positioning Transmitter n Long range to 500 ft. / 150 m (positioning applications) and up to 100 ft. / 30 m (level applications) n Measures any surface at any angle with narrow beam n Easy installation and intuitive setup n Aiming laser optional Three Dimensional Laser Scanner for Non-Contact Volumetric Measurement of Bulk Materials in Silos and Stock Piles n 3D Laser surface profiling n Integral laser pointer for alignment n 100ft X 100ft (30m X 30m) scanning area n Volume & level measurement of any complex shape n Inventory measured in less than 5 min Hand-held programmer plugs into LM 80 and LM 200 laser transmitters The SureShot 140XP comes with an on-board graphic display High Performance, Long Ranges Laser Level and Position Transmitter n Long range up to 200 ft / 60 m (level applications) and up to 1312 ft / 400 m (positioning applications) n Measures any surface at any angle with narrow beam n Rugged and robust enclosure n Accepts 110/220 VAC and +24VDC input voltages n Built-in aiming laser Explosion Proof, Smart Laser n Long range ft (75 m) n Measure any surface at any angle with narrow beam n Explosion-proof dual compartment enclosure n HART protocol n Built-in aiming laser

6 ULTRASONIC TRANSMITTERS & SWITCHES Model K10 Model K10F Model K20 Model K20H Ultrasonic Transducer Series Model K60 Model K10T3 KSONIK MICRO Loop Powered Ultrasonic n Up to 16 ft. / 5 m measuring range n Low cost, compact level transmitter with integral transducer n Four digit alpha-numeric display n Auto variable power control for difficult applications n PVDF wetted parts for corrosive applications KSONIK MICRO COMPACT Ultrasonic n Up to 13 ft. / 4 m measuring range n Low cost, compact level transmitter with integral transducer n Temperature compensation n PVDF wetted parts for corrosive applications KSONIK MICRO Ultrasonic and Switch n Up to 32 ft. / 10 m measuring range n Low cost, compact level transmitter with integral transducer n 128 x 64 dot matrix display n Open channel flow measurement n Auto variable power control for difficult applications n PVDF wetted parts for corrosive applications n Continuous level transmitter and level switch n Trend recorder KSONIK I Short Range Ultrasonic n Range to 50 ft. / 15 m n Graphic LCD display n Integrated KSCOPE software n Automatic variable GAP for difficult applications n Open channel flow n Trend recorder KSONIK III Long Range Ultrasonic n Long range up to 195 ft. / 60 m n Graphic LCD display n Single or dual channel configuration n Integrated KSCOPE software n Automatic variable GAP for difficult applications n Trend recorder

7 Vibrating Liquid Level Switches Series Resonator Model RS85 VIBRATING FORK LEVEL SWITCHES Liquid Level Switch Solutions RS85 Multi-Option Vibrating Liquid Level Switch n Continuous self-test diagnostics n Extended probe lengths to 120 (3048mm) n Exotic metal options n Variety of process connections Vibrating Level Switch Interface Measurement for Solids in Liquids n Detects solids in water / liquids n Accepts universal input voltage n Modular and simple design n No calibration required Resonator Model RS80 RS80 Vibrating Liquid Level Switch n Direct replacement for ultrasonic GAP switches, RF capacitance switches, float switches and other technologies n Immune to low to medium coating or build-up on sensor n Standard 3/4 MNPT process connection n Field selectable parameters with external magnet or internal pushbuttons (fail safe, density) Model VF30 Vibrating Level Switch for Powders in Granular Solids n Accepts universal input voltage n Acceptable for most powders and granulated materials down to 1.3 PCF n Modular and simple design n Self cleaning Vibrating Liquid Level Switch (Loop Powered Only) n Any mounting 3/4 inches NPT or larger n Adjustable time delay ( seconds) n Optional special alloy sensors: Hasetalloy C-276 or Monel

8 RF/CAPACITANCE CONTROLS Loop Powered RF n Low cost loop powered, 4-20 ma output n Integral transmitter with dual compartment housing n External magnet calibration - no need to open case n Explosion-proof enclosure, intrinsically safe probes eliminate explosion-proof conduit seal requirement RF Capacitance Switch with KSHIELD Sensing Probes & Single Setpoint Electronics n Liquids and bulk solids n KSHIELD sensing probes and single setpoint n Electronics that provide immunity to buildup n Element sensitivity down to 0.5 pf Compact All Star II RF Level Switch n Totally potted electronics n Vibration resistant n NEMA 4 enclosure n 5, 10 or 15 second time delay Robust All Star II RF Level Switch n DPDT relay n Rugged probe designs n Explosion-proof enclosure n 5, 10 or 15 second time delay RF Capacitance Switch with Dual Setpoint & Pump Control n Liquids and bulk solids n Easy setup via external magnet or push buttons n Wide variety of 2-element sensing probes available up to 450 F (232 C) / 3000 psi n Field selectable modes of operations that include: single setpoint, dual setpoint and pump control Multi Purpose & High Sensitivity RF Level Switch n Remote mounting up to 50 ft / 15 m n Explosion-proof enclosure n 0 to 30 second time delay n Temperature compensation

9 Thermal Dispersion Flow / Level / Temperature Switch (Standard Response Time) n For liquids, gases and small granular solids n One switch for gas or liquid flow, liquid level, interface level or temperature n Explosion proof, no moving parts n Temperature range of -320 F to 900 F (-195 C to 482 C) n Pressure to 10,000 psi (689 bar) Thermal Dispersion Flow / Level / Temperature Switch (Fast Response) n For liquids or small granular solids n One switch for gas or liquid flow, liquid level, interface level or temperature n 316L stainless steel all welded construction standard n Temperature range of -50 F to 350 F (-46 C to 177 C) standard Thermal Dispersion Flow/Level/ Temperature Switch (Sanitary) n One switch for gas or liquid flow, liquid level, interface level or temperature n Designed to 3A standards n Temperature range of -50 F to 350 F (-46 C to 177 C) standard n Optional electropolished wetted parts THERMAL DISPERSION LEVEL / FLOW SWITCHES Thermal Dispersion Flow / Temperature Switch (In-Line Unit) n One switch for either flow or temperature applications n No moving parts n 316L stainless steel wetted parts n Ideal for low flow applications Thermal Dispersion Flow / Temperature Switch (In-Line Unit) n No moving parts n Operating temperature of -50 F to 350 F (-46 C to 177 C) n Pressure to 2000 psi(138 bar) n Extremely low flow applications SOLIDS LEVEL MEASUREMENT Electro-Mechanical Continuous Measurement System n Plumb bob device n Insensitive to changes in product density, dust in the silo, changes in moisture of the material and products that are inclided to stick n Available in rope or tape n Variety of sensor weights n Robust die cast housing Rotating Paddle Switch n Drop-in replacement for existing rotary paddle switches n Two 20 amp, SPDT switch n 120 or 240 operating voltage n Non-contact, double shielded bearings Non-Contact Microwave Indicator n Blocked chute detection n Point level detector n Not affected by dust or particle build up n Configurable relay output with on/off delay

10 BUOYANCY LEVEL SWITCHES MS8D Electric Level Displacer Switch n Polypropylene displacer for high pressure applications n Electrical contacts are magnetically isolated from process n Hermetically sealed SPDT switch (NO / NC Contact) n Vibration resistant MS50 Multi Point Liquid Level Sensor n Unique magnetic coupling concept n Switch trip points adjustable without removing vessel from service n Up to six (6) SPDT switches per unit n Interface level capability MS10 Electric Level Switch n Hermetically sealed SPDT switch n Pressure to 5000 psi (345 bar) n Choice of international flanges n Precision fabricated floats MS8F Extended Body Horizontal Electric Level Switch n Custom insertion length up to 24 inches (610mm) n Available with polypropylene displacer (MS8D) or stainless steel float (MS8F) n Electrical contacts are magnetically isolated from process n Hermetically sealed SPDT switch Mechanical Cage Level Switch n Rugged and robust chamber design for demanding applications n One step switch point adjust n precision fabricated floats and displacers n Easily retrofitted to most competitor models) KVIEW100 Digital Controller n MODBUS RTU communications n Ability to read 8 ea ma inputs and 4 ea. pulse inputs n Relay outputs with adjustable dead band n 2 ea ma programmable outputs n Large transflective display makes it easy to read indoors or in direct sunlight FIELD INDICATORS & CONTROLLERS KVIEW10 Digital Controller n MODBUS RTU communications n Ability to read and power 4 ea ma input signals and 2 ea. pulse inputs n Relays with adjustable DB and 4 ea ma outputs n Large transflective display makes it easy to read indoors or in direct sunlight n Displays in feet and inches, psi, ma, gpm, or custom units Loop Powered Digital Indicator n Two ranges of zero and span allows calibration in engineering units n Operating power derived from current loop n 2.5 volt maximum voltage drop n NEMA 4X or explosion-proof versions Digital Process Monitor n Accepts 0-5V, 0-10V, 1-5V, 4-20mA or 0-20mA analog signal input n NEMA 4X and explosion-proof enclosure option n +24V output available for loop power n Optional RS422 or RS323 serial communication IR10 & PP10 External Relays n Simplifies field relay implementation n Easy mounting and installation n Vibration resistant n 10 amp contact rating

11 SPECIALTY LEVEL INSTRUMENTS Valve Positioner n High accuracy.01 % of full scale with patented magnetostrictive sensing technology n Microprocessor-based n Never requires recalibration n Field replaceable module Tank Car Gauging Device n Provides isolation from tank fluids while gauging n Temperature range of -50 F to 300 F / -45 C to 149 C n Pressures to 600 psi / 41 bar n Measures specific gravities from 0.44 with a single float Seal Fluid Supply Tank n High visibility, magnetically coupled barrier fluid level indication n Magnetically coupled high / low level switches available n Designed for barrier fluid specific gravity requirements n Used in applications where a 2 to 5 gallon vessel is needed DX80 Wireless Transmitter & Receiver n Eliminate high cost of wiring n Weatherproof n DC power required n Line of sight ranges up to 3 miles with included antenna BETA PRESSURE/TEMPERATURE SWITCHES AccuTrak AT500MD Drilling Mud Pit n High resolution 4-20 ma output - no signal conditioner required n Rugged design: 3/4 inch schedule 40 n Zero and span setpoints adjust digitally n Calibrates without opening enclosure BETA Pressure/Temperature Switch n Worldwide agency approvals n User Friendly Modifications - Standard features incorporated for your safety n Wide rangeability with 100% accuracy over the full range n Only 3 process wetted parts n Very high overrange pressures - No setpoint shift or damage to sensor n No maintenance

12 Providing Level Solutions: Anytime, Anywhere. Global Manufacturing Facilities K-TEK Instruments (Pty) Ltd. Gauteng, South Africa K-TEK Level Eng. Pvt. Ltd. Mumbai, India K-TEK (Tianjin) Level Co., Ltd. Tianjin, China K-TEK BV Rijswijk, The Netherlands K-TEK Solids Level Houston, TX USA +1(713) K-TEK Corp. Prairieville, LA USA +1(225) The Leader in Level Detection K-TEK Swamp Road Prairieville, LA tel: +1(225) fax: +1(225) toll free: +1(800) CBR e ( ) DCN0434