Goodsky Technical Data. Contact Details
|
|
|
- Charla Brown
- 6 years ago
- Views:
Transcription
1 Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have been combined to provide technical information about the specific product(s) you have selected. Please note that the number of variants of Goodsky relay part numbers means that it is not possible to maintain stock of every one. If you are researching to replace just one relay on a component, say as a spare part for domestic equipment, you may need to contact the manufacturer of that equipment. Stock of Goodsky relays is maintained in the UK for those exact parts where there is a continuous demand within the UK. Contact Details Goodsky sales and service in the UK H. Kuhnke Ltd Unit 21, Abbey Enterprise Centre Premier Way Romsey Hants SO51 9AQ T: +44 (0) F: +44 (0) goodsky@kuhnke.co.uk Important Note The information shown in these documents is for guidance only. No liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper application of the parts, assemblies or equipment described.
2 SERIES For Home Appliance Application:Wind-Volume Control on Air- Conditioner; Power Control on Power Supply / TV; etc. Features: Small Size( mm) Automation Production 5A, 250VAC; TV3; >6mm Creepage / Clearance Safety Standard:VDE, C-UL, TÜV RoHS Compliant
3 性能比較表 (Performance Comparison List) 品牌 Supplier GOODSKY Tyco OEG Soung Chuan 型號 Item OJ/OJE 835 接點部 Contact Specs Coil Type 開關型式 Contact Configuration 接點材質 Contact Matarial 接點規格 Contact Rating 最大流通電流 Max. Allowable Current DCV DCV DCV 1a 1A,1B 1A,,1C Ag Alloy Ag Alloy Ag Alloy 5A30VDC TV3 120VAC (cosø=1) 5A 28VDC (cosø=0.4) A 28VDC 10A240VAC/30VDC 12A120VAC 8A240VAC 5A 10A 10A 最大承受電壓 250 VAC,30VDC 265VAC,30VDC 277VAC/30VDC 額定電壓 Nominal Voltage 3,5,6,9,12,24 3,5,6,9,12,24,48 3,5,6,9,12,18,24 動作電壓 Pull-In Voltage % 80% 75% 80% 線圈部 Coil Specs 開放電壓 Drop-Out Voltage % 5% 5% 5% 額定消耗功率 Power Consumption 0.20W 0.45 / 0.2W 0.45 /0.2 W 最大承受電壓 110% 120% / 130% 160% 接點阻抗 Contact Resistance 100mΩ 100mΩ 100mΩ 動作時間 Operate Time 10mS 10ms 10ms 開放時間 Release Time 5mS 4ms 5ms 最大開閉頻率 Max. On/Off Switching: 耐電壓 (AC) Dielectric Strength 機械 Mechanical 電氣 Electrical I/O 300/min 300/min - 20/min 30/min V OJ:4000VAC OJE:3000VAC 1000VAC O/O 1000V 750VAC 750VAC 性能 Performance 振動 Vibration 耐久 Endurance 誤動作 Error Operation 100m/S2 10G 10G 100m/S 2 100G 100G 壽命 Life Expectancy 機械 Mechanical 電氣 Electrical 1x107 1x107 1x107 1x105 1x105 1x105 使用環境溫度 Temperature Range 使用環境溼度 Humidity Range 重量 Weight -40~70-30~55-30~85 45~85%RH 45~85% - 9g 9g 6g 安全規格 Safety Standard C-UL / TUV VDE / SEMKO UL / CSA / TUV / VDE / UG UL / CSA / TUV / VDE 寸法 Dimension 外型尺寸 Dimension 18.2x10x x10x x10.6x15.6 端腳外型 Terminal Type 直 Pin(DIP) 90 Pin(SMD) V V V
4 Main Feature 1. The contact form construction is 1a (SPST). 2. Miniature size with high sensitive type 200mW, high contact reliability with sealed type. 3. The Surge Strength of Series is 10,000V. 4. The selection of plastic insulation material is designed for high temperature and provides better chemical solution performance. Contact Rating Application Load Type Rated Load (Resistive) Contact Capacity Rated Carrying Current Max. Allowable Current Max. Allowable Power Force Contact Material Contact Form Domestic Appliances, Office Machines, Audio Equipment, etc. Performance (at Initial Value) Contact Resistance mΩ Operate Time msec. Max. Release Time... 5 msec. Max. Dielectric Strength : Between Coil & Contact... 4,000VAC at 50/60 Hz for one minute. Between Contacts... 1,000VAC at 50/60 Hz For one minute. Surge Strength... 10,000V (between coil & contact 1.2x50μSec.) Insulation Resistance MegaΩ Min. at 500VDC. Max. On/Off Switching : Electrical Cycles per Minute. Mechanical Cycles per Minute. Temperature Range ~70 C (LM) 5A 30VDC TV-3 120VAC 5A AC 250V DC 30V 5A 1,250VA 300W Ag Alloy SPST Humidity Range... 45~85% RH. Coil Temperature Rise C Max. Vibration: Endurance to 55 Hz dual amplitude width 1.5mm. Error Operation to 55 Hz dual amplitude width 1.5mm. Shock: Endurance... 1,000 m/s 2. Error Operation m/s 2. Life Expectancy : Mechanical Operations at No Load condition. Electrical Operations at Rated Resistive Load. 2.5x10 4 Operations at TV Rated Load. Weight... About 9.0 g. Safety Standard & Its File Number C-UL... E TÜV... R VDE
5 Coil Specification (at 20 C) Coil Sensitivity Nominal Nominal Current (ma) Coil Resistance (Ω±10%) Power Consumption (W) Pull-In Voltage (VDC) Drop-Out Maximum Allowable Abt % Maximum 5% Minimum 110% ,800 Ordering Information - SS L M Contact Form: Coil Type: Coil Voltage: Number of Pole: Type of Sealing: Type: M: One Form A L: High Sensitivity DC Coil 03: 3V, 05: 5V, 06: 6V, 09: 9V, 12: 12V, 24: 24V 1: One Pole SS:RT Ⅱ flux proofed relays SH:RT Ⅲ wash tight relays Classification Model Coil Sensitivity Flux Proofed Relay Wash Tight Relay High Sensitivity DC Coil -SS-1 LM -SH-1 LM Dimension ( 5mm+ 0.2mm, > 5mm + 0.3mm, the tolerance of PCB thru hole: +0.1mm) -SS/SH BOTTOM VIEW BOTTOM VIEW
Goodsky Technical Data. Contact Details
Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Goodsky Technical Data. Contact Details
Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
SPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
Features. Insulation system F 835-1A-F-C 835-1A-F-S L-1A-C 835L-1A-S F 835L-1A-F-C 835L-1A-F-S NL-1A-C 835NL-1A-S
Type List Terminal style PCB terminal L PCB terminal NL PCB terminal Contact form 1A (SPNO) 1A (SPNO) 1A (SPNO) Insulation system Features Miniature 12A 12VAC, A 20VAC/30VDC PCB Relay. UL/CUL, CSA, TUV,
Classification Enclosure rating Contact form Contact material
PCB Relay Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm.
Classification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard. SPST-NO (1a) Fully sealed PCB terminal
SPST Slim Power Relay for A switching Slim -mm width and miniature size. (20.08 12. mm) High switching capability A (20 VAC and VDC), and high contact reliability by crossbar-twin contact. Low power consumption
Classification Enclosure rating Contact form Model Standard Flux protection SPST-NO G6RL-1A
PCB Relay Low-profile power relay with maximum switching of 8 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) Dielectric strength: 5 kv Clearance and creepage distance: 10 mm. RoHS
Ordering Information. PCB Relay G6RL. Model Number Legend: Low-profile power relay with maximum switching of 10 A
PCB Relay G6RL Low-profile power relay with maximum switching of 10 A Low profile: 12.3 mm in height Max. switching capacity: 2,500 VA (NO) IEC 60947-5-1, AC-15, DC13 Clearance and creepage distance: 10
PCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
G5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend
PC Power Relay A Miniature Relay with -pole A/5A Switching Capability and 0 kv Impulse Withstand Voltage Highly efficient magnetic circuit for high sensitivity (200 mw). Small, yet provides 0-kV impulse
Classification Terminal Shape Contact form Enclosure rating Model Rated coil voltage
ow-profile Relay with Various Models ow profile:.7 mm in height. Creepage distance 8mm between coil and contacts 0 kv Impulse withstand voltage Models with AC coil available. High-Inrush model available
Classification Contact form Contact type Contact material Enclosure Rating Model Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2
Miniature Relay for Signal Circuits ROHS compliant. Wide switching power of 10 µa to 2 A. High dielectric strength coil-contacts:1,000 VAC; open contacts: 750 VAC. Conforms to FCC Part 68 requirements.
G5LE. Ordering Information. PCB Relay. A Cubic, Single-pole 10-A Power Relay J MODEL NUMBER LEGEND G5LE PCB Relay G5LE
PCB Relay GLE A Cubic, Single-pole 0-A Power Relay D Subminiature sugar cube relay. D Contact ratings of 0 A. D Withstands impulses of up to 4,00 V. D Two types of seal available: flux protection and plastic-sealed.
Features. UL Insulation. Sealed type washable 1A (SPNO) H H-1A-C 845H-1A-V 845H-1A-S. system approval Flux tight Sealed type
84 Features Low cost and low profile miniature PCB Relays. UL/CUL, TUV approved. High rating 12A SPDT, DPDT. mm & mm pinning are both available. Optional for class F. Standard coil 0mW and high sensitivity
EN GWT compliant Low profile: 15.7mm.618inch height 1a/1c 16A power relay
EN6033-1 GWT compliant Low profile: 1.7mm inch height 1a/1c 16A power relay LZ-N RELAYS (ALZN) Protective construction: Flux-resistant type New 12. 28.8.492 RoHS compliant 1.7 (Unit: mm inch) FEATURES
Alphanumeric Index. Circuit Breakers Low-signal PC Board Relays Mid-Range PC Board Relays
Alphanumeric Index Series Type Page 0409 (Hi-Inrush)... A, One-pole Relay... 488 04... 16A, One-pole Relay... 491 0429 (Hi-Inrush)... A, One-pole Relay... 457 0430... -16A, One- or Two-pole Relay... 495
G6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.
Miniature High Capacity Relays with SPST-NO 0A and SPST-NO + SPST-NC A SPST-NO 0A and SPST-NO + SPST-NC A for power switching and output that satisfy the needs for space-saving. Small High-capacity Relays
G5Q. Ordering Information. Specifications. PCB Relay. Compact, High Isolation Relay J COIL RATINGS. 638 PCB Relay G5Q
PCB Relay G5Q Compact, High Isolation Relay D Compact single pole relay with high isolation between coil and contacts. D Up to 10 A switching on the NO contacts. D Ensures a withstand impulse voltage of
Type Sealing Poles Contacts Rated voltage Model Standard Flux-tight 4 poles 3PST-NO, SPST-NC 24 VDC G7SA-3A1B. Type LED indicator Poles Rated voltage
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
MULTILAYER HIGH CURRENT/HIGH FREQUENCY FERRITE CHIP BEAD
INTRODUCTION 產品介紹 Multilayer high current chip beads are SMD components that possess a low DC resistance. Their impedance mainly comprises resistive part. Therefore, when this component is inserted in
1a/1c/2a/2c/5A/10A power relays for power supply
Automation Controls Catalog VDE a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant /Sealed ORDERING INFORMATION Contact arrangement : Form C a:
Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).
Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity
G2RL-1A G2RL-1 G2RL-2A G2RL-2
9 PCB Relay High Capacity, Low Profile Relay Low profile:.7 mm max. in height Cadmium-free contacts ensuring environment-friendly use 0 kv impulse surge withstand Clearance and creepage distance: 0 mm/0
PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
Features. Designation (provided with) style. Contact. Insulation. system. gap. 110A-1AH-F-C 110BA-1AH-F-C 110A-1AH1-F-C 110BA-1AH1-F-C High power type
0 eatures High duty sugar cube relay with 6A 77VAC, A 77VAC. Contact gap can be greater than.mm,.mm. Conforms to European photovoltaic standard IEC 609-. Coil holding can be reduced to 6%, %V of the nominal
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) VSB SERIES FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
1a 16A power relay for micro wave oven
VDE 1a power relay for micro wave oven LE RELAYS (ALE) RoHS compliant FEATURES 1. Supports magnetron and heater loads. Capable for switching magnetron and heater loads found in microwave ovens. 2. Excellent
SPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
Safety Monitoring Relays
Safety Monitoring Relays Contents Selection Guide I-2 Safety Monitoring Relays G9SA I-6 SR0A I-2 SR03AM I-3 SR04P I-7 SR05E I-7 SR06ED I-2 SR08AD & SR09AD I-8 SR20MP I-2 SR25SMS45 I-22 SR3A I-25 SR20A
Type Sealing Poles Contacts Rated voltage Model 5PST-NO, SPST-NC 24 VDC *1
Slim Relays with Forcibly Guided Contacts Conforming to EN Standards EN50205 Class A, approved by VDE. Ideal for use in safety circuits in production machinery. Four-pole and six-pole Relays are available.
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. POWER RELAY 1 POLE 3,, 1 A FBR16 SERIES FEATURES Compact with high power (3
COMPACT PC BOARD POWER RELAY FEATURES. Characteristics. Initial breakdown voltage* 1. Vibration resistance
VDE PACT PC BOARD POWER RELAY JW RELAYS..... FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in µs between coil and contact
MY-GS. Miniature Power Relays. Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays.
Miniature Power Relays CSM DS_E_1_1 Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays Relays with AC and DC coils have different colors of operating indicators
1a/1c/2a/2c/5A/10A power relays for power supply
a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant type/ ORDERING INFORMATION JW Contact arrangement : Form C a: Form A 2: 2 Form C 2a: 2 Form
Type Sealing Poles Contact configuration Rated voltage Model. Type LED indicator Poles Rated voltage Model
Relays with Forcibly Guided Contacts CSM DS_E_6_ Compact, Slim Relays Conforming to EN Standards Relays with forcibly guided contacts (EN50205 Class A, certified by VDE). Supports the CE marking of machinery
16A POWER RELAY FOR MICRO WAVE OVEN
VDE 6A POWER RELAY FOR MICRO WAVE OVEN LE RELAYS (ALE) TMP type New FEATURES. Price competitive having better price competitiveness (New 4 mw only) 2. Supports magnetron and heater loads. Switching possible
CONVENTIONAL TYPE REED RELAY EDR0 SERIES
CONVENTIONAL TYPE REED RELAY EDR0 SERIES EDR001 EDR002 EDR003 EDR007 EDR009 EDR010 EDR011 EDR012 EDR013 EDR015 EDR016 EDR018 1 FEATURES EDR0 01, 02, 03, 07, 09, 10, 11, 12, 13, 15, 16 SERIES 2.54 mm IC
TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N
![TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N](/thumbs/84/91187989.jpg "TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N")
TEL:-3349 FAX:-332E-MAIL: szss@3.com FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FBR2 SERIES FEATURES (FOR SIGNAL APPLICATIONS)
POWER RELAY. FTR-K3-WS Series. 1 POLE - High Capacity 25A Type FTR-K1 SERIES FEATURES
POWER RELAY 1 POLE - High Capacity 25A Type FTR-K3-WS Series FEATURES 1 pole, 25A 1 form A contact Wide contact gap: 1.8mm Dielectric strength (B/T open contacts) 2.5kV Compliant with European photovoltaic
DISCONTINUED (2009) 1 POLE 16 A SLIM POWER RELAY FTR-JR Series POWER RELAY. RoHS compliant FEATURES APPLICATIONS
POWER RELAY POLE 6 A SLIM POWER RELAY RoHS compliant DISCONTINUED (9) FEATURES Pole 6A slim relay with #7 Tab terminal Nominal Power: 3 mw (3% power reduction compared to VR Series) Cadmium free contacts
Suitable for lighting and motor load, 1 Form A 50A latching relays
Suitable for lighting and motor load, 50A latching relays DJ-H RELAYS (ADJH) 9.0 5 1 0.2 9.0 5 New 1 FEATURES 1. High inrush capability Tungsten load (TV-20 class) Electronic ballast load (NEMA10) Capacitive
PCB Relay. --- G2R-1-SN --- G2R-2-SN LED indicator with test
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE0 (VDE approval: C0 insulation grade), UL08, CSA., SEV, SEMKO. Meets VDE0700 requirements for household products according
Song Chuan / Relay Catalog 507
07 eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. 2A 277VAC DPDT. Low profile.7 and high insulation system class High CTI material &
PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)
![PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)](/thumbs/83/88064178.jpg "PARTNUMBER INFORMATION FTR-K1 C K 005 W - MA - RG [Example] (a) (b) (c) (d) (e) (f) (g)")
POWER RELAY 1 POLE - 16A/12A/10A Transparent cover FTR-K1 Series FEATURES 16A, 12A, 10A versions Transparent cover Low profile (height: 15.7mm) High insulation Insulation distance (between coil and contacts):
PCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
FBR211 SERIES 1 POLE MINIATURE RELAY. 1 to 2 A (FOR SIGNAL SWITCHING) 1 to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS)
MINIATURE RELAY POLE FBR2 SERIES to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS) 2 A maximum carrying current Capable of 2 A maximum continuous carrying
Compact Relay Family with Forcibly Guided Contacts
Compact Relay Family with Forcibly Guided Contacts SF-Y RELAYS -pole ( Form A Form B, Form A Form B) -pole ( Form A Form B, 5 Form A Form B) RoHS compliant FEATURES. Forcibly guided contact structure Relay
DISCONTINUED (2002) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES FEATURES Super miniature size: 0.2 inch 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom
POWER RELAY. FTR-K3-WG Series. 1 POLE - 25A - 1.5mm contact gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 25A - 1.5mm contact gap FTR-K3-WG Series FEATURES 1 pole, 25A 1 Form A Contact gap 1.5mm Surge strength (B/T open contacts) 2.5kV Compliance with European photovoltaic
COMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS..... RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Miniature package with universal terminal footprint High dielectric withstanding for
Load for air conditioner 1a 20A power relays
VDE Load for air conditioner 1a A power relays LF RELAYS (ALF) TMP type PCB type RoHS compliant FEATURES 1. Ideal for compressor and inverter loads 1) Compressor load: A 5V AC ) Inverter load: A V AC,
COMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS.... Compliance with RoHS Directive FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) Lead Free FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES RoHS compliant FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals
1a/1c 5A/10A small power relays
VDE a/c A/A small power relays RELAYS Compliance with RoHS Directive FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:,
MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
507-1A H - - C. Features. Type List. Ordering Information
Type List Standard type Teral style Contact form High rating iature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 77VAC SPDT. Low profile mm and high insulation system class.
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) RoHS compliant FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay
VE 12 H M S E K HV VD (a) ( * ) (b) (c) (d) (e) (f) (g) (h) (i)
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) VE SERIES Lead Free FEATURES UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in small package
Compact size 2 Form A and 2 Form A 1 Form B 35A power relays for energy management and industrial equipment. Conditions. Mirror contact mechanisms
Compact size and 3A power relays for energy management and industrial equipment HE-S RELAYS New TYPICAL APPLICATIONS Photovoltaic power generation systems (Solar inverter) Uninterruptible Power Supplies
G8P. PCB Power Relay. Model Number Legend. Application Examples. Ordering Information
CB ower Relay Up to 30 A switching capacity in compact package. 2.0 mm cantact gap type available (-1A4-B) Available with quick-connect contact terminals for easy load connecting with either QC or CB coil
POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)
![POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)](/thumbs/82/85798757.jpg "POWER RELAY. FTR-H2 Series. 1 POLE - 10A Relay Type FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-H2 A K 012 T [Example] (a) (b) (c) (d) (e)")
FTR-K SERIES POWER RELAY POLE - 0A Relay Type FTR-H Series FEATURES High density mounting Saves space by 6% compared to FTR-H type High insulation Insulation distance: minimum 6mm between coil and contact
Contact Ag + Au-clad AgPd + Au-clad. General purpose DPDT G6AU-274P-ST-US G6AU-234P-ST-US 4PDT G6AU-474P-ST-US G6AU-434P-ST-US
Fully sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment ROHS compliant. High sensitivity can be driven by digital circuits. Horizontal design allows use in 2 inch PCB racks.
HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY
VDE JQ HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY JQ RELAYS.77.39.. mm inch FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw () High
888-1AC-F-C 888-1AC-F-V 888-1AC-F-S (SPNO) 888-2AC-F-C 888-2AC-F-V 888-2AC-F-S (DPNO) 888N-2AC-F-C 888N-2AC-F-V 888N-2AC-F-S (DPNO)
Type List Standard Type eatures High rating miniature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 277VAC SPDT. Low profile.7mm and high insulation system Class. High CTI material
Type Poles Contact configuration Rated voltage Model G7S-4A2B 24 VDC 3PST-NO, 3PST-NC
Relays with Forcibly Guided Contacts G7S CSM_G7S_DS_E_5_ Relays Conforming to EN Standard Relays with forcibly guided contacts (EN50205 Class A, certified by VDE). Supports the CE marking of machinery
Model Number Structure
General-purpose Relay MK-I/-S Electromechanical Relays Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long
Ratings Ratings SPST-NO SPDT DPST-NO DPDT
A Power Relay for a Variety of Purposes with Various Models Conforms to EN 680, UL8, CSA., SEV, SEMKO. Meets VDE0700 requirements for household products according to VDE00. Clearance and creepage distance:
OMRON MK-I / -S RELAY
Issued April 0 0 DATA SHEET OMRON MK-I / -S RELAY Based on OMRON Datasheet General-purpose Relay MK-I/-S 0 Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks
CV : 16 A, pinning 5 mm,: switching at 105 C 6. Market Code None : General purpose HA : Home Appliance according to IEC/EN
ow Profile Power Relay with.7 mm height, ideal for incorporation in miniature equipments A wide variety of single pole, double pole, high-capacity (6 A) type and high-sensitivity type (2 mw) Relays are
Compliant with European standards 1a/1c 6A Slim power relays
PF (APF) VDE Compliant with European standards 1a/1c 6A Slim power relays PF RELAYS (APF) RoHS compliant FEATURES 1. High density mounting with mm.197 inch width Space saved with mm.197 inch slim type
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES Lead Free / RoHS compliant* FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL
1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series
POWER RELAY FTR-K1 SERIES 1 POLE - 16A LOW PROFILE TYPE FTR-K1 Series RoHS compliant FEATURES Low profile (height: 15.7mm) HIGH ISOLATION5 Insulation Distance (between coil and contacts: 10mm min.) Dielectric
MY-GS CSM_MY-GS_DS_E_2_1
Miniature Power Relays CSM DS_E 1 Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays Reduces wiring work by % when combined with the PYF-PU Push-In Plus Socket
DISCONTINUED (1998) 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR244 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY POLES to A (FOR SIGNAL SWITCHING) FBR44 SERIES FEATURES Gold-overlay bifurcated contact Contact material and shape especially suitable for signal switching; assures reliability at low level
Distributed by: www.jameco.com -8-83-22 The content and copyrights of the attached material are the property of its owner. VDE TV-, AMP ( Form A) Power Relay HE RELAYS.299 3.8.9 RoHS Directive compatibility
FBR46 SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge
Type Poles Contact configuration Rated voltage Model 3PST-NO, 3PST-NC 24 VDC
Relays with Forcibly Guided Contacts G7S-@-E CSM_G7S-_-E_DS_E_3_ Lineup Now Includes -A Models Relays with forcibly guided contacts (EN525 Class A, certified by VDE). Supports the CE marking of machinery
8 A MINIATURE POWER RELAY IN DS RELAY SERIES
DSP A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS DSPa.. DSPa.. DSP.. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Power types added to DS relay series High switching
Subminiature Automotive Relays Type CV20 Monostable
Subminiature Automotive Relays Type CV20 Subminiature relay Switching capacity 20 A DC coils 6 to 24 VDC 1 change over contact/1 double make contact High resistance to vibration and shock Low power consumption
Type Contact form Plug-in/solder Plug-in/solder PCB terminals Upper-mounting terminals terminals with plug-in/solder
A Miniature Power Relay Equipped with arc barrier. Dielectric strength: 2,000 V. Built-in diode models added to the LY Series. Single-pole and double-pole models are applicable to operating coils with
PCB relay for DC voltage, polarized, monostable or bistable
V23042 PCB relay for DC voltage, polarized, monostable or bistable Features Universally applicable in the most varied circuit functions in the field of telecommunications and small signal technology Versatile
CER7027B / CER7032B / CER7042B / CER7042BA / CER7052B CER8042B / CER8065B CER1042B / CER1065B CER1242B / CER1257B / CER1277B
一般機器用 For Consumer Products 汎用パワーインダクタ Common Power Inductors CER-B series RoHS CER727B / CER732B / CER742B / CER742BA / CER752B CER842B / CER865B CER42B / CER65B CER242B / CER257B / CER277B 特徴 DC-DC コンバータ用インダクタとして最適
4. Classification E: High capacity. 3. Terminal Form Blank: Tab terminals (#250 terminals) Tab terminals #250 SPST-NO
New Product News G9EJ--E Compact Capable of Switching 4 V A DC loads Actualize a high capacity interruption through the function of extinction of magnetic arc by adopting high-efficiency magnetic circuit.
Surface-mounting Relay
Surface-mounting Relay Extremely Thin SPST-NO Flat Relay, One of the Thinnest Relays in the World Dimensions of 7.(W).6(L) 4.2 mm(h) (SMD) or 3.8 mm(h) (TH) represent a reduction of approximately 2% in
MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure
General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E 1 New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator
2 POLES 5 A LOW PROFILE TYPE
POWER RELAY POLES A LOW PROFILE TYPE FTR-F1 SERIES FEATURES Low profile power relay (height 1. mm) employing unique construction DPST/DPDT A, TV-3 rating available Higher isolation by employing reinforced
VF SERIES 1 POLE 20, 25, 30 A POWER RELAY (HEAVY POWER CONTROL) VF SERIES. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 20, 25, 30 A (HEAVY POWER CONTROL) VF SERIES RoHS compliant FEATURES UL, CSA, VDE recognized TV-15 rated 1 Form A (SPST-NO) contact Heavy duty 20 to 30 A small power relay High inrush
B3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
General-purpose Relay
General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical
24GHz BSD Radar. 24 GHz Radar Blind Spot Detection. Installation Guide
P/N : VS-91A001 Page :1 of 8 24 GHz Radar Blind Spot Detection Installation Guide P/N : VS-91A001 Page :2 of 8 CONTENT 1. SYSTEM ARCHITECTURE TURE 1.1 Layout... 3 1.2 Components.....4 2. Installation 2.1
Relay Types. Reed V23100-V4 Relay. Typical applications. Features. DIP version (flat) DIP version (high) SIL version.
1 and 2 pole relays non-polarized, non-latching ROHS compliant (Directive 2002/95/EC) as per product date code 0501. Features Direct coil control with TTL-signals possible Highly reliable switching High
CSM_G7S-_-E_DS_E_7_1
Relays with Forcibly Guided Contacts G7S-@-E CSM_G7S-_-E_DS_E_7_ Relays with Forcibly Guided Contacts and High Switching Capacity of A Relays with forcibly guided contacts (EN525 Class A, certified by
Magnecraft Printed Circuit Board & Reed Relays. Catalog
Magnecraft Printed Circuit Board & Reed Relays Catalog 2010 Contents Series Overview....................................................3 117SIP Relays.....................................................4
3. Contact Form A: SPST-NO
0 A Compact and high power latching relay High power switching: 0 A, 6 VAC Compact size: mm mm mm Low temperature-rise High overcurrent capability, conforming to IEC6055- UC RoHS Compliant Model Number
Miniature Power Relay MSR
V23061 PCB relay for DC voltage, neutral, monostable Features Used as a switching element for electrical separation between low-power control circuits and power load circuits With 8 mm clearance and creepage
10 A MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A 1 Form A. Initial breakdown voltage* 2. Vibration resistance.
VDE A MINIATURE POWER RELAY RELAYS a..9.9 SPECIFICATIONS power FEATURES.9 ab.9 Contact, Arrangement Form A Form A Form B Initial contact resistance, ma. (By drop V DC A) mω Contact material Gold flash
MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure
General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator
Relè di potenza 30 A SЕRIES. Power. generators. Industrial washing machines. Burners, boilers and furnaces. Industrial furnaces and ovens
66 SЕRIES Relè di potenza 30 Power generators Industrial washing machines Burners, boilers and furnaces Industrial furnaces and ovens ir conditioners Hoists and cranes Back-up generators Industrial motors