Electromechanical Relays Selection Guide

Transcription

1 Electromechanical Relays Selection Guide Latching JAN Non-Latching RF Commercial Established Reliability Surface-Mount Attenuated Environmental

2 Switching Solutions Teledyne Relays has been the world s innovative leader in the manufacture of ultraminiature, hermetically sealed, electromechanical and solid-state switching products for more than 0 years. The company s comprehensive product line meets a wide range of requirements for defense and aerospace, industrial, commercial, medical and RF & wireless applications. Business Focus MIL QPL & COTS Solid-State Relays MIL QPL & COTS Electromechanical Relays HiRel (Space) Electromechanical Relays RF & Microwave Relays & Coaxial Switches Industrial Solid-State Relays Switching Matrices Markets Commercial & Military Aviation Defense & Aerospace Telecom/Communications (Wireless) Instrumentation & Test Industrial Power & Motion Control Medical Applications Product Assurance Under an aggressive Total Quality Management (TQM) program, Teledyne Relays has embraced a continuous improvement culture. With recognized certifications such as AS/EN/JISQ 00 - Revision B and ISO 00:00, DSCC MIL-STD-0 and Boeing D- Appendix A, Teledyne Relays has become a primary supplier of switching solutions with the highest quality and reliability to industry leaders around the world. Technical Service & Customer Support Teledyne Relays provides easy access to technical service and customer support. Our websites make it easy to find technical information, buy products and even get responses within hours. Switching solutions are only a mouse click away at or at teledyne-europe.com. Information about coax switches is available at Teledyne Relays offer superior signal integrity up to Gbps. See the RF relays section in our website.

3 Table of Contents RF RELAYS Series Description Page RF00/RF0 High Repeatability, Broadband Centigrid Relays, Non-Latching DPDT GRF Surface-Mount Centigrid RF Relays, Non-Latching DPDT RF00/RF0 High Repeatability, Broadband TO- Relays, Non-Latching DPDT RF High Repeatability, Broadband TO- Relays, Non-Latching DPDT RF/RF High Repeatability, Broadband TO- Relays, Non-Latching SPDT GRF Surface-Mount TO- RF Relays, Magnetic-Latching DPDT RF0 Broadband RF Relays, Magnetic-Latching DPDT RF Broadband TO- RF Relays, Magnetic-Latching SPDT RF0/RF High Repeatability TO- Relays, Normally Closed, Bypass RF0/RF High Repeatability TO- Relays, Normally Open, Bypass A0 Broadband Attenuator RF Relay 0 A Broadband Attenuator RF Relay 0 COMMERCIAL RELAYS C Centigrid Relays (CMOS Compatible), Magnetic-Latching DPDT Centigrid Relays, Non-Latching DPDT TO- Relays, Non-Latching DPDT TO- Relays, Magnetic-Latching DPDT TO- Relays, Non-Latching Sensitive DPDT COMMERCIAL SURFACE-MOUNT RELAYS S Surface-Mount Centigrid Relays, Non-Latching DPDT S Surface-Mount Centigrid Relays, Non-Latching Sensitive DPDT S Surface-Mount Centigrid Relays, Non-Latching DPDT S Surface-Mount TO- Relays, Magnetic-Latching DPDT ESTABLISHED RELIABILITY RELAYS ER Centigrid Relays, Non-Latching DPDT ERC Centigrid Relays (CMOS Compatible), Non-Latching DPDT ER Centigrid Relays, Non-Latching Sensitive DPDT ERC Centigrid Relays (CMOS Compatible), Non-Latching Sensitive DPDT See specific series for additional features and options Continued on next page 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

4 Table of Contents ESTABLISHED RELIABILITY RELAYS (continued) Series Description Page ER TO- Relays, Non-Latching SPDT ER TO- Relays, Non-Latching Sensitive SPDT ER TO- Relays, Non-Latching DPDT ER TO- Relays, Non-Latching Sensitive DPDT Half-Size Crystal Can, Magnetic-Latching DPDT 0 ER TO- Relays, Magnetic-Latching SPDT 0 ER0 TO- Relays, Magnetic-Latching DPDT ER TO- Relays, Magnetic-Latching DPDT MILITARY QUALIFIED (JAN) RELAYS J Centigrid Relays, Non-Latching DPDT JC Centigrid Relays (CMOS Compatible), Non-Latching DPDT J Centigrid Relays, Non-Latching Sensitive DPDT JC Centigrid Relays (CMOS Compatible), Non-Latching Sensitive DPDT J TO- Relays, Non-Latching SPDT J TO- Relays, Non-Latching Sensitive SPDT J TO- Relays, Non-Latching DPDT J TO- Relays, Non-Latching Sensitive DPDT J Half-Size Crystal Can, Magnetic-Latching DPDT J TO- Relays, Magnetic-Latching SPDT J0 TO- Relays, Magnetic-Latching DPDT J TO- Relays, Magnetic-Latching DPDT HIGH-PERFORMANCE RELAYS H/H High- (00 C) TO- Relays, Non-Latching DPDT H High- (00 C) TO- Relays, Magnetic-Latching DPDT K High-Shock TO- Relays, Non-Latching DPDT K High-Shock TO- Relays, Magnetic-Latching DPDT V/V High-Vibration TO- Relays, Non-Latching DPDT 0 See specific series for additional features and options Continued on next page Page (00) (0) 00 TELEDYNE RELAYS

5 Table of Contents APPENDIX Description Page Signal Integrity Eye Diagrams - RoHS and Reach Certificate of Compliance Part Numbering System 0- Spacer Pad Options Spreader Pad Options Ground Pin Options Established Reliability Program - Teledyne Relays HI-REL Program Authorized Distributors Authorized North American Representatives Teledyne Relays offers a variety of options to customize and meet your specific design needs. GRF Option TO- Relays with straight butt pins for surface-mount applications * RF Relays Only SGRF Option TO- Relays with Gull-Wing (J-Lead) pins for surfacemount applications * RF Relays Only GRF Option Centigrid Relays with straight butt pins for surface-mount applications * RF Relays Only SGRF Option TO- Relays with Gull-Wing (J-Lead) pins for surfacemount applications * RF Relays Only SRF Option Relays with Gull-Wing (J-Lead) pins for surfacemount applications * RF Relays Only /S Option Relays with 0. trimmed leads See Appendix: Part Numbering System Spacer Pad Option Relays with polyester film pad to space between PCB and Relay Header See Appendix: Spacer Pad Options Spreader Pad Option Relays with Diallyl Phthalate pad to spread pins See Appendix: Spreader Pad Options /Q, /R Option Relays with solder dipped leads. Pb/Sn (0/0) or RoHS solder available See Appendix: Part Numbering System See specific series for additional features and options 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

6 RF RELAYS RF Series RF00/RF0 Electromechanical Relays The RF00 and RF0 Centigrid relays are designed to provide improved RF signal repeatability over the frequency range. The GRF00 and GRF0 Centigrid relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole-to-pole isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. The SGRF00 and SGRF0 Centigrid relays extend performance advantages over similar RF devices that simply offer formed leads for surface mounting. DPDT Non-Latching Coil Type 00 = Standard Coil 0 = Sensitive Coil Mounting RF = Thru-hole GRF = Surface-Mount (Stub) SGRF = Surface-Mount (J-Lead) Storage: C to + C Operating: C to + C RF00 RF0 GRF00 GRF0 Frequency (GHz) VSWR (max) Typical RF Performance Pole to Pole (min) Isolation (db) Across Contacts (min) Insertion Loss (db) (max) 0 DC-. : : : Excellent Signal integrity up to 0Gbps Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations 0 DC-. : : : : SGRF00 SGRF0 0 DC-. : : : :.0 Series GRF Electromechanical Relays The GRF Centigrid relay is a hermetically sealed, armature relay for.ghz RF applications. Its low profile height.0 (. mm) and.00 (. mm) grid spaced terminals make it an ideal choice where extreme packaging density and/or close PC board spacing are required. The GRF features a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole-topole isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. The GRF extends performance advantages over similar RF devices that simply offer formed leads for surface mounting. The Series GRFD has an internal discrete silicon diode for coil suppression. Excellent Signal integrity up to 0Gbps Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations DPDT Non-Latching Coil Type = Standard Coil Diode Option D = Internal diode for coil transient suppression Mounting GRF = Surface-Mount (Stub) Storage: C to + C Operating: C to + C GRF GRFD Frequency (GHz) VSWR (max) Typical RF Performance Pole to Pole (min) Isolation (db) Across Contacts (min) Insertion Loss (db) (max) 0 DC-. : : : 0 0. Schematics as viewed from terminals GRF GRFD Page (00) (0) 00 TELEDYNE RELAYS

7 RF RELAYS Series RF00/RF0 Electromechanical Relays The RF00 and RF0 TO- relays are designed to provide improved RF signal repeatability over the frequency range. The GRF00 and GRF0 TO- relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole-to-pole isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. The SGRF00 and SGRF0 TO- relays extend performance advantages over similar RF devices that simply offer formed leads for surface mounting. DPDT Non-Latching Coil Type 00 = Standard Coil 0 = Sensitive Coil Diode Option D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Mounting RF = Thru-hole GRF = Surface-Mount (Stub) SGRF = Surface-Mount (J-Lead) SRF = Surface Mount (J-Lead) Storage: C to + C Operating: C to + C RF00 RF00D RF0 RF0D GRF00 GRF00D GRF0 GRF0D SGRF00 SGRF00D SGRF0 SGRF0D SRF00 SRF00D Frequency (GHz) VSWR (max) Typical RF Performance Pole to Pole (min) Isolation (db) Across Contacts (min) Insertion Loss (db) (max) 0 DC-. : : : Excellent Signal integrity up to 0Gbps+ Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations 0 DC-. : : : :.0 0 DC-. : : : : DC-. : : 0. RF SRF0 SRF0D : : For RF00DD & RF0DD values please see Datasheet D 0D 00DD 0DD Schematics as viewed from terminals 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

8 RF RELAYS R F Series RF Electromechanical Relays The RF is designed to improve upon the RF00/RF0 relay s high frequency performance. The RF offers monotonic insertion loss over to GHz. This improvement in RF insertion loss over the frequency range, makes these relays highly suitable for use in attenuator and other RF circuits. The GRF is designed to improve upon the GRF00/GRF0 relay s high frequency performance. The GRF TO- relay features a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole-to-pole isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. DPDT Non-Latching Coil Type = Standard Coil Mounting RF = Thru-hole GRF = Surface-Mount (Stub) SGRF = Surface-Mount (J-Lead) Storage: C to + C Operating: C to + C RF GRF SGRF Frequency (GHz) VSWR (max) Excellent Signal integrity up to Gbps+ Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations Typical RF Performance Pole to Pole (min) Isolation (db) Across Contacts (min) Insertion Loss (db) (max) DC-. : : : : DC-. : : : : 0. DC-. : : : : 0. Schematics as viewed from terminals Page (00) (0) 00 TELEDYNE RELAYS

9 RF RELAYS Series RF/RF Electromechanical Relays The RF/RF relays are designed to provide improved RF signal repeatability over the frequency range. These relays are highly suitable for use in attenuator and other RF circuits. The GRF offers monotonic insertion loss to GHz. This improvement in RF insertion loss over the frequency range makes these relays highly suitable for use in attenuator and other RF circuits. The GRF features a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. SPDT Non-Latching Coil Type = Standard Coil = Sensitive Coil Mounting RF = Thru-hole GRF = Surface-Mount (Stub) Storage: C to + C Operating: C to + C RF GRF Frequency (GHz) Typical RF Performance VSWR (max) Excellent Signal integrity up to 0Gbps Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations Isolation Across Contacts (db) (min) Insertion Loss (db) (max) DC-. : : : : 0. DC-. : : : 0. RF -. : 0.0 RF DC-. : : : : 0. Series GRF Electromechanical Relays The Series GRF relay is a hermetically sealed, RF relay designed from inception for surface mount applications. This magnetic-latching relay features extremely low internal circuit losses for exceptional time and frequency domain response characteristics through and beyond the UHF spectrum and into the S band. The GRF features a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole-to-pole isolation. This ground shield provides an RF ground interface that results in improved high-frequency performance as well as parametric repeatability. The GRF extends performance advantages over similar RF devices that simply offer formed leads for surface mounting. Excellent Signal integrity up to 0Gbps Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations DPDT Magnetic-Latching Coil Type = Standard Coil Mounting GRF = Surface-Mount (Stub) Storage: C to + C Operating: C to + C GRF Frequency (GHz) VSWR (max) Typical RF Performance Pole to Pole (min) Isolation (db) Across Contacts (min) Insertion Loss (db) (max) 0 DC-. : : : Schematics as viewed from terminals GRF + (Coil A Last Energized) 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

10 RF RELAYS RF Series RF0 Electromechanical Relays The Series RF0 relay is a hermetically sealed, magnetic-latching relay featuring extremely low intercontact capacitance for exceptional RF performance over the full UHF spectrum. Its low profile height and.00 (. mm) grid spaced terminals make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The GRF0 features a unique ground shield that isolates and shields each lead to ensure excellent contactto-contact and pole-to-pole isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. DPDT Magnetic-Latching Coil Type 0 = Standard Coil Mounting RF = Thru-hole GRF = Surface-Mount (Stub) Storage: C to + C Operating: C to + C RF0 GRF0 Frequency (GHz) VSWR (max) Excellent Signal integrity up to 0Gbps Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations Typical RF Performance Pole to Pole (min) Isolation (db) Across Contacts (min) Insertion Loss (db) (max) DC-. : : : 0. DC-. : : : (Coil B Last Energized) Series RF Electromechanical Relays The RF series relay is an ultraminiature, hermetically sealed, magnetic-latching relay featuring extremely low intercontact capacitance for exceptional RF performance well into the C band. Its low profile and small size make it ideal for applications where extreme packaging density and/or close PC board spacing are required. Due to its minimal mass, many relays may be used to configure replacements for bulkier switching solutions at substantial savings in weight. The RF design has been optimized by increasing the distance between the set/reset contacts. This design improvement makes these unique relays the perfect choice for use in RF attenuators, RF switching matrices and other RF applications requiring high isolation, low insertion loss and low VSWR. The GRF features a unique ground shield that isolates and shields each lead to ensure excellent contactto-contact isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. Excellent Signal integrity up to 0Gbps Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations SPDT Magnetic-Latching Coil Type = Standard Coil Mounting RF = Thru-hole GRF = Surface-Mount (Stub) Storage: C to + C Operating: C to + C _ + + _ (Coil A Last Energized) RF GRF Frequency (GHz) Typical RF Performance Schematics as viewed from terminals Page (00) (0) 00 TELEDYNE RELAYS VSWR (max) Isolation Across Contacts (db) (min) Insertion Loss (db) (max) DC-. : : : 0.0 DC-. : : :.

11 RF RELAYS Series RF0/RF Electromechanical Relays The ultraminiature RF0 and RF relays are designed with an internal bypass (through path), when the coil is de-energized, to provide low insertion loss and VSWR through the bypass and simplicity of design for the user. Relays have improved RF insertion loss repeatability over the frequency range from DC to GHz. Highly suitable for use in attenuator, linear amplifier and other RF circuits. N.C. bypass configuration Repeatable insertion loss Broad Bandwidth Metal Enclosure for EMI shielding Ground pin option to improve ground case RF grounding High isolation between control and signal path Typical RF Performance RF Normally Closed Bypass Coil Type 0 = Standard Coil Frequency (GHz) N.O. (max) VSWR Bypass (max) Isolation (db) N.O. (min) Bypass (min) Insertion Loss (db) N.O. (max) Bypass (max) = Sensitive Coil Mounting RF = Thru-hole RF0 0 DC-. :. : :. : :. : Storage: C to + C Operating: C to + C 00 DC-. :. : RF 0 -. :. : RF0 RF -. :. : Series RF0/RF Electromechanical Relays The ultraminiature RF0 and RF relays are designed with an internal bypass (through path), when the coil is energized, to provide low insertion loss and VSWR through the bypass and simplicity of design for the user. The RF0 and RF relays have improved RF insertion loss repeatability over the frequency range from DC to GHz. Highly suitable for use in attenuator, linear amplifier and other RF circuits. N.O. bypass configuration Repeatable insertion loss Broad Bandwidth Metal Enclosure for EMI shielding Ground pin option to improve ground case RF grounding High isolation between control and signal path Normally Open Bypass Coil Type 0 = Standard Coil = Sensitive Coil Mounting RF = Thru-hole Storage: C to + C Operating: C to + C RF0 RF Frequency (GHz) N.C. (max) Typical RF Performance VSWR Bypass (max) Isolation (db) N.C. (min) Bypass (min) Insertion Loss (db) N.C. (max) Bypass (max) 0 DC-. :. : :. : :. : DC-. :. : :. : RF0 RF -. :. : Schematics as viewed from terminals 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

12 RF RELAYS RF Series A0 Electromechanical Relays The Series A0 ultraminiature Attenuator Relays are designed for attenuating RF signals in 0-ohm systems over a frequency range from DC to GHz. Their low profile and small grid spacing makes them ideal for use when packaging density is a prime consideration. The A0 relays eliminate the need for additional external resistors. These single section, switchable attenuator relays have internal matched thin film attenuator pads in L, T or Pi configurations, as applicable. Relays are available in fixed increments of,,,,,,, 0, and 0 db, which can be used singly or in combination to achieve the attenuation levels desired. The GA0 features a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. Excellent phase linearity Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations RF Attenuator Coil Type A0 = Standard Coil Mounting A = Thru-hole GA = Surface-Mount (Stub) Storage: C to + C Operating: C to + C A0 Frequency (GHz) Typical RF Performance Attenuated Path (Typ.) VSWR Thru Path (Max.) Insertion Loss (db) Typ. Max. 0 DC-.0 :.0 : :.0 : :. : DC-.0 :.0 : Attenuator Pad 0 GA :.0 : :.0 : Series A Electromechanical Relays The Series A highly repeatable ultraminiature attenuator relays are designed for attenuating RF signals in 0-ohm systems over a frequency range from DC to GHz. Their low profile and small grid spacing makes them ideal for use when packaging density is a prime consideration. The A relays eliminate the need for additional external resistors/attenuators. These single section, switchable attenuator relays have an internal matched thin film attenuator pad in a Pi configuration. Relays are available in a fixed increment of 0 db. (Other values available) The GA features a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. Hermetically Sealed High to ESD Metal Enclosure for EMI shielding High Repeatability Broader bandwidth Through-hole or surface-mount configurations RF Attenuator Coil Type A = Standard Coil Mounting A = Thru-hole GA = Surface-Mount (Stub) Storage: C to + C Operating: C to + C A Frequency (GHz) Typical RF Performance Attenuated Path (Typ.) VSWR Thru Path (Max.) Insertion Loss (db) Typ. Max. 0 DC-.0 :.0 : :.0 : :. : See Datasheet 0 DC-.0 :.0 : Attenuator Pad GA :.0 : :.0 : :.0 : Page 0 (00) (0) 00 TELEDYNE RELAYS

13 COMMERCIAL RELAYS Series C Electromechanical Relays The C Centigrid magnetic-latching relay is an ultraminiature, hermetically sealed, armature relay capable of being directly driven by most IC logic families. Its low profile height and.00 (. mm) grid spaced terminals, which precludes the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The basic operating function and internal structure are similar to Teledyne s TO-, relay series. The C is capable of meeting Teledyne Relays TR requirements. The Series C relay has internal silicon diodes for coil suppression, Zener diodes to protect the MOSFET gate inputs, and N-channel enhancement-mode MOSFET chips, which enable direct relay interfacing with most microprocessor and IC logic families (CMOS, TTL and MOS). The C magnetic-latching relay is ideally suited for applications where coil operating power must be minimized. The relays can be operated with a short-duration pulse. After the contacts have transferred, no external coil power is required. The magnetic-latching feature of the Series C relay provides a memory capability, since the relays will not reset upon removal of coil power. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Magnetic-Latching CMOS Feature Internal power MOSFET driver and diode coil suppression Vibration 0 g s to 000 Hz Acceleration Shock 00 g s msec, half-sine C Coil Current (ma) Min. Max. Operating Latch and Power Reset (mw) (Max).. 0. Resistive: A/Vdc..0. Inductive: 00mA/Vdc (0mH)... Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv COMMERCIAL 0 g s 0+ Storage: C to + C Operating: C to + C PIN : GATE A PIN : SUPPLY PIN : GATE B PIN 0: + SUPPLY C (Coil A Last Energized) Series Electromechanical Relays The Centigrid relay is an ultraminiature, hermetically sealed, armature relay for commercial applications. Its low profile height.0 (. mm) and.00 (. mm) grid spaced terminals, which preclude the need for spreader pads, make it an ideal choice where extreme packaging density and/or close PC board spacing are required. The Series relay has an internal discrete silicon diode for coil transient suppression. By virtue of its inherently low intercontact capacitance and contact circuit losses, the relay is an excellent subminiature RF switch for frequencies well into the UHF spectrum. Applications include telecommunications, test instruments, mobile communications, attenuators, and automatic test equipment. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Non-Latching Diode Options D = Internal diode for coil transient suppression Vibration Shock 0 g s msec, 0 g s to 00 Hz half-sine Storage: C to + C Operating: C to + C Schematics as viewed from terminals D P.U.V (max.) Operating Power (mw) D. Resistive: A/Vdc. 0 Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc, A0/GA0 S/S D, Low D Level: 0 to 0 ua/0 to 0 A/GA mv SD/SD D DD, DD SDD/SDD P.U.V = Pick-Up Attenuator Pad 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

14 COMMERCIAL RELAYS Series Electromechanical Relays The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, the Series relays are some of the most versatile ultraminiature relays available because of their small size and low coil power dissipation. The Series D relay has an internal discrete silicon diode for coil transient suppression. The hybrid Series TN relay has an internal silicon diode and transistor driver. The integrated packaging of the relay with its associated semiconductor devices greatly reduces PC board floor space requirements as well as component installation costs. By virtue of its inherently low intercontact capacitance and contact circuit losses, the has proven to be excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for the TO- relay is in handheld radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit-Receive switching. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities COMMERCIAL Series Electromechanical Relays COIL A D TN COIL A Schematics as viewed from terminals (Coil A (Coil Last A Energized) Last Energized) (Coil A (Coil Last A Energized) Last Energized) The magnetic-latching TO- relay, originally conceived and developed (Bottom (Bottom by View) Teledyne, View) has become one of the (Bottom View) (Coil A Last Energized) (Bottom View) industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board Unique uni-frame design providing mounting, the relay has become one of the most versatile ultraminiature relays available because of its high magnetic efficiency and mechanical small size and low coil power dissipation. rigidity The Series D relay has discrete silicon diodes for coil transient suppression D High 0D force/mass ratio for resistance to shock 0DD 0DD The Series magnetic-latching relays are ideally suited for applications where coil power dissipation and vibration must be minimized. The relays can be operated with a short duration pulse and after the contacts have Precious metal alloy contact material with transferred, no external coil power is required. The magnetic-latching feature of the Series provides a gold plating assures excellent high current COIL B COIL B memory capability, since the relays will not reset upon removal of coil power. and dry circuit switching capabilities DPDT Magnetic-Latching Diode Options D = Internal diode for coil transient suppression Vibration 0 g s to 00 Hz DPDT Non-Latching Diode Options D = Internal diode for coil transient suppression TN = Internal transistor driver and coil transient suppression diode Vibration 0 g s to 00 Hz Shock 0 g s msec, half-sine Storage: C to + C Operating: C to + C Shock 0 g s msec, half-sine Storage: C to + C Operating: C to + C D TN P.U.V (max.) Base Current to Turn On ( TN only) Resistive: A/Vdc..0 Inductive: 00mA/Vdc (0mH) 0.. Lamp: 00mA/Vdc 0..0 Low Level: 0 to 0 ua/0 to 0 mv D D DD DD COIL B COIL B COIL A Set & Reset (Coil A (Coil Last A Energized) Last Energized) (Bottom View). Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc COIL B D 00.0 Low Level: 0 to 0 ua/0 to 0 mv D D 0. H H KK COIL B COIL B COIL B COIL A (Coil A (Coil Last A Energized) Last Energized) (Bottom View) 0 D (Coil A Last Energized) DD DD 0 0 C COIL A (Coil A (Coil Last A Energized) Last Energized) (Bottom View) COIL A COIL A COIL CO A (Coil A (Coil Last A Energized) Last Energized) (Coil A (Coil Last A Energized) Last Energized) (Bottom View) (Bottom View) (Coil A (Coil Last A Energized) Last Energized) (Bottom View) Page (00) (0) 00 TELEDYNE RELAYS

15 COMMERCIAL RELAYS Series Electromechanical Relays The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, the Series relay is one of the most versatile ultraminiature relays available because of their small size and low coil power dissipation. The sensitive relay has a high resistance coil, thus requiring extremely low operating power (00 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. The Series D relay has an internal discrete silicon diode for coil transient suppression. The hybrid Series TN relay has an internal silicon diode and transistor driver. The integrated packaging of the relay with its associated semiconductor devices greatly reduces PC board floor space requirements as well as component installation costs. By virtue of its inherently low intercontact capacitance and contact circuit losses, the has proven to be excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for the TO- relay is in handheld radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit-Receive switching. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Non-Latching Coil Diode Options D = Internal diode for coil transient suppression TN = Internal transistor driver and coil transient suppression diode Vibration Shock 0 g s msec, 0 g s to 00 Hz half-sine D TN P.U.V (max.) Base Current to Turn On ( TN only) Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv COMMERCIAL Storage: C to + C Operating: C to + C 0 D TN Schematics as viewed from terminals 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

16 COMMERCIAL surface-mount RELAYS Series S & S Electromechanical Relays The Series S Surface Mount Centigrid Relay is an ultraminiature, hermetically sealed, armature relay. The low profile height.0 (. mm) and.00 (. mm) lead spacing make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The specially formed leads are pre-tinned to make the relays ideal for most types of surface mount solder reflow processes. The basic design and internal construction are identical to the Series & Centigrid relays, and are capable of meeting Teledyne Relays TR requirements. The SD and SDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The sensitive S surface mount Centigrid Relay has a high resistance coil, thus requiring extremely low operating power (00 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities COMMERCIAL SURFACE-MOUNT DPDT Non-Latching Coil Type S = Standard Coil S = Sensitive Coil Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s Shock g s msec, half-sine Storage: C to + C Operating: C to + C, S/S S SD SDD S SD SDD P.U.V (max.) D.O.V min. max Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv 00., S/S D, D SD/SD D. 0.. Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv D, D SD/SD D DD, DD SDD/SDD S S DD, DD SDD/SDD SD SD C, C SDD SDD C Schematics as viewed from terminals PIN : + SUPPLY PIN : SUPPLY PIN 0: GATE Page (00) (0) C, C 00 TELEDYNE (Coil A Last Energized) RELAYS C PIN : GATE A PIN : SUPPLY PIN : GATE B PIN 0: + SUPPLY

17 COMMERCIAL surface-mount RELAYS Series S Electromechanical Relays The S surface mount Centigrid relay is an ultraminiature, hermetically sealed, armature relay for commercial applications. Its low profile height.0 (. mm) and.00 (. mm) grid spaced terminals make it an ideal choice where extreme packaging density and/or close PC board spacing are required. The specially formed surface-mount leads are pre-tinned to make the relays ideal for all types of surface-mount solder reflow processes. The basic design and internal structure are similar to Teledyne s DPDT Centigrid relay. (see page ) The SD relay has an internal discrete silicon diode for coil transient suppression. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Non-Latching Diode Options D = Internal diode for coil transient suppression Vibration 0 g s to 00 Hz Shock 0 g s msec, half-sine Storage: C to + C Operating: C to + C S SD Series S Electromechanical Relays P.U.V (max.) Operating Power (mw) (Bottom S View) D SD (Bottom View) DD The magnetic-latching TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to COIL ampere. B Designed for high-density PC board surface mounting, its small size and low coil power dissipation make the S relay one of the most versatile ultraminiature relays available. The Series SD and SDD COIL utilize A discrete diodes for coil suppression and polarity reversal protection. The Series S magnetic-latching relays are ideally suited for applications where power (Bottom (Bottom dissipation View) View) must be minimized. The relays can be operated with a short duration pulse. After the contacts have transferred, no external holding power is required. (Coil A Last Energized) C, C, C C (Coil A Last Energized) The magnetic-latching feature of the Series (Bottom S View) relays provide a memory capability, (Bottom since View) the relays will not reset upon removal of coil power.. 0 Resistive: A/Vdc Inductive: 00mA/Vdc (0mH), Lamp: 00mA/Vdc, S/S S/S DD, DD, DD DD SDD/SDD D, D, D D SD/SD SD/SD D D C C 0+ Low Level: 0 to 0 ua/0 to 0 mv All COIL welded B construction Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities 0+ (Coil A Last Energized) COMMERCIAL SURFACE-MOUNT DPDT Magnetic-Latching Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration Shock 0 g s msec, 0 g s to 00 Hz half-sine Storage: C to + C Operating: C to + C Schematics as viewed from terminals PIN : GATE A PIN : PIN + SUPPLY : + SUPPLY PIN : PIN SUPPLY : SUPPLY 0 PIN : PIN SUPPLY : SUPPLY 0D PIN : PIN GATE : GATE B B 0DD PIN 0: PIN GATE 0: GATE PIN 0: PIN + 0: SUPPLY + SUPPLY Set & Reset S SD (Coil A Last Energized) SDD H K COIL B 0 0 COIL A S (Bottom (Bottom View) View) COIL B. Resistive: (Coil A (Coil Last A Energized) Last Energized) A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc 00.0 Low Level: 0 to 0 ua/0 to 0 mv (Coil A Last Energized) (Coil A Last Energized). Resistive: A/Vdc. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv 0 D. DD SD (Bottom View) PIN : GATE A 0 0 SDD (Coil A (Coil Last A Energized) Last Energized) (Bottom View) (Coil A Last Energized) (Coil A Last Energized) (Bottom (Coil A Last View) Energized) 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

18 ESTABLISHED RELIABILITY T R RELAYS Series ER Electromechanical Relays The Series ER Centigrid relay is an ultraminiature, hermetically sealed, armature relay. Its low profile height. ( mm) and.00 (. mm) grid spaced terminals, which precludes the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The basic design and internal construction are similar to the standard Teledyne DPDT TO- relay (e.g., Series ER). The Series ERD and ERDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. By virtue of its inherently low intercontact capacitance and contact circuit losses, the ER relay has proven to be an excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for the ER relay is in handheld radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit-Receive switching. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities ESTABLISHED RELIABILITY DPDT Non-Latching Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s Shock g s msec, half-sine Operating & Storage: C to + C ER ERD ERDD P.U.V (max.) D.O.V min. max Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Series ERC Electromechanical Relays The ERC Centigrid relay is an ultraminiature, hermetically sealed, armature relay capable of being directly driven by most IC logic families. Its low profile height and.00 (. mm) grid spaced terminals, which preclude the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The Series ERC utilizes an internal silicon diode for coil suppression, a Zener diode to protect the MOSFET gate input, and an N-channel enhancement mode MOSFET chip, which enables direct relay interfacing with most Microprocessor and IC logic families (CMOS, TTL and MOS). DPDT Non-Latching CMOS Feature Internal power MOSFET driver, Zener diode gate protection, and diode coil suppression Vibration 0 g s to 000 Hz Acceleration 0 g s Shock g s msec,, S/S half-sine Operating & Storage: C to + C ERC, S/S Coil Current (ma) Operating Power (mw) Min. Max. P.U.V (max.) Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration D, D SD/SD D...0 Resistive: A/Vdc 0... Inductive: 00mA/Vdc (0mH)... Lamp: 00mA/Vdc... Low Level: 0 to 0 ua/0 to 0 mv... D, D.. 0. SD/SD DD, DD D SDD/SDD 0 + PIN : + SUPPLY PIN : SUPPLY PIN 0: GATE P.U.V = Pick-Up ER (Bottom ERD View) ERDD ERC DD, DD SDD/SDD Page (00) (0) 00 TELEDYNE RELAYS C, C 0 + Schematics as viewed from terminals C 0+ PIN : + SUPPLY PIN : GATE A PIN : SUPPLY

19 ESTABLISHED RELIABILITY T R RELAYS Series ER Electromechanical Relays The ER sensitive Centigrid relay retains the same features as the ER standard Centigrid relay with only a minimal increase in profile height. (. mm). Its.00 (. mm) grid spaced terminals, which preclude the need for spreader pads, and its low profile make the ER relay ideal for applications where high packaging density is important. The Series ERD and ERDD have internal discrete silicon diodes for coil suppression and polarity reversal protection. The sensitive ER Centigrid relay has a high resistance coil, thus requiring extremely low operating power (00 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Non-Latching Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s Shock g s msec, half-sine Operating & Storage: C to + C ER ERD ERDD P.U.V (max.) D.O.V min. max Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Series ERC Electromechanical Relays The sensitive ERC Centigrid relay is an ultraminiature, hermetically sealed, armature relay capable of being directly driven by most IC logic families. Its low profile height and.00 (. mm) grid spaced terminals, which precludes the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The sensitive ERC Centigrid relay has a high resistance coil, thus requiring extremely low operating power (00 mw, typical). The advantages of reduced heat dissipation and power supply demands are a plus. The sensitive Series ERC utilizes an internal silicon diode for coil suppression, a Zener diode to protect the MOSFET gate input, and an N-channel enhancement-mode MOSFET chip that enables direct relay interfacing with most microprocessor and IC logic families (CMOS, TTL and MOS). DPDT Non-Latching CMOS Feature Internal power MOSFET driver, Zener diode gate protection, and diode coil suppression Vibration 0 g s to 000 Hz Acceleration 0 g s Shock, g s msec, S/S half-sine Operating & Storage: C to + C ERC, S/S Coil Current (ma) Operating Power (mw) Min. Max. P.U.V (max.) Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration D, D SD/SD D Resistive: A/Vdc Inductive: 00mA/Vdc (0mH).. 0. Lamp: 00mA/Vdc.. 0. Low Level: 0 to 0 ua/0 to 0 mv D,. D. 0. SD/SD DD, DD D. 0.. SDD/SDD 0 + PIN : + SUPPLY PIN : SUPPLY PIN 0: GATE ESTABLISHED RELIABILITY Schematics as viewed from terminals ER (Bottom ERD View) ERDD ERC DD, DD SDD/SDD P.U.V = Pick-Up D.O.V = Drop-Out 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page C, C 0 + C 0+ PIN : + SUPPLY PIN : GATE A PIN : SUPPLY

20 ESTABLISHED RELIABILITY T R RELAYS Series ER & ER Electromechanical Relays The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed specifically for high-density PC board mounting, its small size and low coil power dissipation make the ER relay one of the most versatile ultraminiature relays available. The Series ERD and ERDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid ERT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. The sensitive ER relay has a high resistance coil, thus requiring extremely low operating power (0 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. The Series ERD and ERDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid ERT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by minimizing the number of external components needed to drive the relay. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities ESTABLISHED RELIABILITY DD SPDT Non-Latching Coil Type ER = Standard Coil ER = Sensitive Coil Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection T = Internal transistor drive and coil transient suppression diode Vibration 0 g s to 000 Hz Acceleration 0 g s T/T Shock g s msec, half-sine Operating & Storage: C to + C ER ER ERD ERD ERDD ERDD ER ERD ERDD ERT ER ERD ERDD ERT P.U.V (max.) D.O.V min. max Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv ERT ERT Schematics as viewed from terminals P.U.V = Pick-Up D.O.V = Drop-Out Page (00) (0) 00 TELEDYNE RELAYS

21 ESTABLISHED RELIABILITY T R RELAYS Series ER & ER Electromechanical Relays The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed specifically for high-density PC board mounting, its small size and low coil power dissipation make the ER relay one of the most versatile ultraminiature relays available. The Series ERD and ERDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid ERT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. The sensitive ER relay has a high resistance coil, thus requiring extremely low operating power (00 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. The Series ERD and ERDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid ERT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by minimizing the number of external components needed to drive the relay. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities D DD DPDT Non-Latching Coil Type ER = Standard Coil ER = Sensitive Coil Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection T = Internal transistor drive and coil transient suppression diode Vibration 0 g s to 000 Hz Acceleration 0 g s T/T T/T TN/TN 0 Shock g s msec, half-sine Operating & Storage: C to + C ER ER ERD ERD ERDD ERDD ERT ERT ER ERD ERDD ERT ER ERD ERDD ERT Schematics as viewed from terminals P.U.V (max.) D.O.V min. max Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 ua Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 ua Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv P.U.V = Pick-Up D.O.V = Drop-Out ESTABLISHED RELIABILITY 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

22 ESTABLISHED RELIABILITY T R RELAYS Series,,, Electromechanical Relays The Series is an industry-standard, half-size, latching crystal can relay. It has a wide range of switching capabilities ranging from low level to amps. The Series J/ latching relay configuration is doublepole double-throw (DPDT), so the relay offers excellent switching density and versatility. Half-Size Crystal Can Features: Low level to amps Wide range of switching capabilities Smallest relay package capable of switching amps Modernized assembly process Lead-free (gold-plated wire lead only) Wire leads, gold-plated or solder-coated Matched seal for superior hermeticity Gold-plated contact assembly Modernized assembly process Advanced cleaning techniques DPDT Magnetic-Latching Vibration 0G, 0-00 Hz (Sinusoidal) Shock 00G, msec half-sine (Specified Pulse) Operating & Storage: C to + C B A A B Y Y X B X (Coil X Last Energized) A Set & Reset Min. Max..0. Y Resistive: A/Vdc Y. B. B A Inductive: 0.A/Vdc (0mH)..0 (Coil X Last Energized) Intermediate (Coil Current: X Last Energized) 0.A/Vdc Lamp: 0.A/Vdc Low Level: 0 to 0 ua/0 to 0 mv A A B Y X Y X (Coil X Last Energized) A B B B Y B A A B A A B A A X X Y X Y X B Y Y B J A (Coil X Last Energized) (Coil X Last Energized) X X B A A A A A B B Y X X Y X X Y A A (Coil Y Last Energized) B B B B ESTABLISHED RELIABILITY Series ER Electromechanical Relays The magnetic-latching TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, its small size and low coil power dissipation make the ER relay one of the most versatile ultraminiature relays available. The Series ERD and ERDD utilize discrete silicon diodes for coil suppression and polarity reversal protection. The Series ER magnetic-latching relays are ideally suited for applications where coil power dissipation must be minimized. The relays can be operated with a short duration pulse. After the contacts have transferred, no external holding power is required. The magnetic-latching feature of the Series ER provides a memory capability, since the relays will not reset upon removal of coil power. SPDT Magnetic-Latching Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s Shock 00 g s msec, half-sine Operating & Storage: C to + C *See Schematics on Page ER ERD ERDD Set & Reset. Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc 00.0 Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc 00.0 Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities Page 0 (00) (0) 00 TELEDYNE RELAYS

23 ESTABLISHED RELIABILITY T R RELAYS Series ER0 & ER Electromechanical Relays The magnetic-latching TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, its small size and low coil power dissipation make the ER0 & ER relays some of the most versatile ultraminiature relays available. The Series ER0D/ERD and ER0DD/ERDD utilize discrete silicon diodes for coil suppression and polarity reversal protection. The Series ER0/ER magnetic-latching relays are ideally suited for applications where coil power dissipation must be minimized. The relays can be operated with a short duration pulse. After the contacts have transferred, no external holding power is required. The magnetic-latching feature of the Series ER0/ ER relays provide a memory capability, since the relays will not reset upon removal of coil power. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Magnetic-Latching Grounding Options 0 = Individual = Common Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s Shock 00 g s msec, half-sine ER0 ER ER0D ERD ER0DD ERDD Set & Reset. Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc 00.0 Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc D D D DD DD. Inductive: 00mA/Vdc DD (0mH) 0. Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv 0. COIL B COIL B COIL A 0 0D 0DD Operating & COIL A Storage: C to + C COIL B (Coil A Last (Coil Energized) A Last Energized) COIL (Coil B A Last (Coil Energized) A Last Energized) (Coil A Last Energized) (Bottom View) (Coil A Last Energized) (Bottom View) D 0D 0D 0DD 0DD 0DD ER0 (Coil A Last ER0D Energized) ER0DD (Coil A Last Energized) COIL B COIL B COIL B D D D Schematics Shown DD with DD Coil DD A Last Energized Schematics as viewed from terminals D DD H COIL A COIL A COIL A K (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom View) (Bottom View) (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom (Bottom View) View) COIL A COIL A COIL A ER ERD ERDD (Coil A Last (Coil A Last Energized) (Coil A Last Energized) (Coil Energized) A Last Energized) (Coil A Last (Coil Energized) A Last Energized) (Bottom View) (Bottom View) (Coil A Last (Coil Energized) A (Coil A Last Energized) Last Energized) D D D DD DD (Bottom DD View) H H H K K K COIL B COIL B COIL B (Coil A 0 Last Energized) 0 (Coil A Last Energized) 0D 0 0D 0D 0DD 0DD 0DD (Bottom 0View) 0 0 (Bottom iew) 0 0 (Coil A Last 0Energized) 0 COIL B COIL A COIL A COIL A ER ERD ERDD (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Coil A Last (Coil Energized) A (Coil Last A Energized) Last COIL Energized) A (Bottom View) (Bottom View) (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom View) (Coil A Last Energized) (Coil A Last Energized) (Coil A Last Energized) (Coil A Last Energized) (Coil A Last Energized) (Bottom View) 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page (Coil A Last Energized) (Bottom View) COIL B (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom (Bottom View) View) (Coil A Last Energized) (Coil A Last (Coil Energized) A (Coil Last Energized) A Last Energized) (Bottom View) COIL A ESTABLISHED RELIABILITY

24 MILITARY QUALIFIED (JAN) RELAYS Series J Electromechanical Relays The Series J Centigrid relay is an ultraminiature, hermetically sealed, armature relay. Its low profile height. ( mm) and.00 (. mm) grid spaced terminals, which precludes the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The basic design and internal construction are similar to the standard Teledyne DPDT TO- relay (e.g., Series J). The Series JD and JDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. By virtue of its inherently low intercontact capacitance and contact circuit losses, the J relay has proven to be an excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for the J relay is in handheld radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit-Receive switching. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Non-Latching Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s Shock g s msec, half-sine Operating & Storage: C to + C J (M0/) JD (M0/) JDD (M0/) P.U.V (max.) D.O.V min. max Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv MILITARY QUALIFIED (JAN) Series JC Electromechanical Relays The JC Centigrid relay is an ultraminiature, hermetically sealed, armature relay capable of being directly driven by most IC logic families. Its low profile height and.00 (. mm) grid spaced terminals, which preclude the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The Series JC utilizes an internal silicon diode for coil suppression, a Zener diode to protect the MOSFET gate input, and an N-channel enhancement mode MOSFET chip, which enables direct relay interfacing with most Microprocessor and IC logic families (CMOS, TTL and MOS). DPDT Non-Latching CMOS Feature Internal power MOSFET driver, Zener diode gate protection, and diode coil suppression Vibration 0 g s to 000 Hz Acceleration 0 g s P.U.V = Pick-Up D.O.V = Drop-Out Shock g s msec,, half-sine S/S Operating & Storage: C to + C Schematics as viewed from terminals JC (M/), Nominal Coil S/S Coil Current (ma) Operating Power (mw) Min. Max. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration D, D SD/SD D J JD (Bottom JDD View) JC DD, DD SDD/SDD Page (00) (0) 00 TELEDYNE RELAYS P.U.V (max.)...0 Resistive: A/Vdc 0... Inductive: 00mA/Vdc (0mH)... Lamp: 00mA/Vdc... Low Level: 0 to 0 ua/0 to 0 mv... D, D.. 0. SD/SD DD, DD C, C D SDD/SDD C, C 0 + C PIN : + SUPPLY PIN : SUPPLY PIN 0: GATE PIN : + SUPPLY PIN : GATE A PIN : SUPPLY

25 MILITARY QUALIFIED (JAN) RELAYS Series J Electromechanical Relays The J sensitive Centigrid relay retains the same features as the J standard Centigrid relay with only a minimal increase in profile height. (. mm). Its.00 (. mm) grid spaced terminals, which preclude the need for spreader pads, and its low profile make the J relay ideal for applications where high packaging density is important. The Series JD and JDD have internal discrete silicon diodes for coil suppression and polarity reversal protection. The sensitive J Centigrid relay has a high resistance coil, thus requiring extremely low operating power (00 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Non-Latching Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s Shock g s msec, half-sine Operating & Storage: C to + C J (M0/) JD (M0/) JDD (M0/) P.U.V (max.) D.O.V min. max Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Series JC Electromechanical Relays The sensitive JC Centigrid relay is an ultraminiature, hermetically sealed, armature relay capable of being directly driven by most IC logic families. Its low profile height and.00 (. mm) grid spaced terminals, which precludes the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The sensitive JC Centigrid relay has a high resistance coil, thus requiring extremely low operating power (00 mw, typical). The advantages of reduced heat dissipation and power supply demands are a plus. The sensitive Series JC utilizes an internal silicon diode for coil suppression, a Zener diode to protect the MOSFET gate input, and an N-channel enhancement-mode MOSFET chip that enables direct relay interfacing with most microprocessor and IC logic families (CMOS, TTL and MOS). DPDT Non-Latching CMOS Feature Internal power MOSFET driver, Zener diode gate protection, and diode coil suppression Vibration 0 g s to 000 Hz Acceleration 0 g s Shock, g s msec, S/S half-sine Operating & Storage: C to + C JC (M/), S/S Coil Current (ma) Operating Power (mw) Min. Max. P.U.V (max.) Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities D, D SD/SD D Resistive: A/Vdc Inductive: 00mA/Vdc (0mH).. 0. Lamp: 00mA/Vdc.. 0. Low Level: 0 to 0 ua/0 to 0 mv D, D.. 0. SD/SD DD, DD C, C D. 0.. SDD/SDD 0 + PIN : + SUPPLY PIN : SUPPLY PIN 0: GATE MILITARY QUALIFIED (JAN) Schematics as viewed from terminals J JD (Bottom JDD View) JC DD, DD SDD/SDD P.U.V = Pick-Up D.O.V = Drop-Out 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page C, C 0 + C 0+ PIN : + SUPPLY PIN : GATE A PIN : SUPPLY

26 MILITARY QUALIFIED (JAN) RELAYS Series J & J Electromechanical Relays The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed specifically for high-density PC board mounting, its small size and low coil power dissipation make the J relay one of the most versatile ultraminiature relays available. The Series JD and JDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid JT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. The sensitive J relay has a high resistance coil, thus requiring extremely low operating power (0 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. The Series JD and JDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid JT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities SPDT Non-Latching Coil Type P.U.V (max.) D.O.V min. max. MILITARY QUALIFIED (JAN) D J = Standard Coil J = Sensitive Coil Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection T = Internal transistor drive and coil transient suppression diode Vibration 0 g s to 000 Hz Acceleration 0 g s T/T Shock g s msec, half-sine Operating & Storage: C to + C J J JD JD JDD JDD J (M0/) JD (M0/) JDD (M0/) JT (M/) J (M0/0) JD (M0/) JDD (M0/) JT (M/). 0.. Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv JT JT P.U.V = Pick-Up D.O.V = Drop-Out Schematics as viewed from terminals Page (00) (0) 00 TELEDYNE RELAYS

27 MILITARY QUALIFIED (JAN) RELAYS Series J & J Electromechanical Relays The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed specifically for high-density PC board mounting, its small size and low coil power dissipation make the J relay one of the most versatile ultraminiature relays available. The Series JD and JDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid JT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. The sensitive J relay has a high resistance coil, thus requiring extremely low operating power (00 mw typical). The advantages of reduced heat dissipation and power supply demands are a plus. The Series JD and JDD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. The hybrid JT relay features an internal silicon suppression diode and transistor driver. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DD DPDT Non-Latching Coil Type J = Standard Coil J = Sensitive Coil Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection T = Internal transistor drive and coil transient suppression diode Vibration 0 g s to 000 Hz Acceleration T/T 0 g s T/T TN/TN Shock g s msec, half-sine Operating & Storage: C to + C J J JD JD JDD JDD J (M0/) JD (M0/) JDD (M0/0) JT (M/) J (M0/) JD (M0/) JDD (M0/) JT (M/) P.U.V (max.) D.O.V min. max Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 ua Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 ua Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv MILITARY QUALIFIED (JAN) 0 JT JT Schematics as viewed from terminals P.U.V = Pick-Up D.O.V = Drop-Out 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

28 MILITARY QUALIFIED (JAN) RELAYS Series J Electromechanical Relays The Series J is an industry-standard, half-size, latching crystal can relay. It has a wide range of switching capabilities ranging from low level to amps. The Series J latching relay configuration is double-pole double-throw (DPDT), so the relay offers excellent switching density and versatility. Half-Size Crystal Can Features: Low level to amps Wide range of switching capabilities Smallest relay package capable of switching amps Modernized assembly process Qualified to MIL-PRF0/ Lead-free (gold-plated wire lead only) Wire leads, gold-plated or solder-coated Matched seal for superior hermeticity Gold-plated contact assembly Modernized assembly process Advanced cleaning techniques DPDT Magnetic-Latching Vibration 0G, 0-00 Hz (Sinusoidal) Shock 00G, msec half-sine (Specified Pulse) Operating & Storage: C to + C J (M0/) J B A A Y Y X X Set & Reset Min. Max..0. Resistive: A/Vdc.. Inductive: 0.A/Vdc (0mH)..0 Intermediate Current: 0.A/Vdc Lamp: 0.A/Vdc Low Level: 0 to 0 ua/0 to 0 mv B B A (Coil X Last Energized) MILITARY QUALIFIED (JAN) Series J Electromechanical Relays The magnetic-latching TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, its small size and low coil power dissipation make the J relay one of the most versatile ultraminiature relays available. The Series JD and JDD utilize discrete silicon diodes for coil suppression and polarity reversal protection. The Series J magnetic-latching relays are ideally suited for applications where coil power dissipation must be minimized. The relays can be operated with a short duration pulse. After the contacts have transferred, no external holding power is required. The magnetic-latching feature of the Series J provides a memory capability, since the relays will not reset upon removal of coil power. SPDT Magnetic-Latching Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s to 000 Hz Acceleration 0 g s *See Schematics on Page Shock 00 g s msec, half-sine Operating & Storage: C to + C J (M0/) JD (M0/) JDD (M0/) Set & Reset. Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc 00.0 Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc 00.0 Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities Page (00) (0) 00 TELEDYNE RELAYS

29 MILITARY QUALIFIED (JAN) RELAYS Series J0 & J Electromechanical Relays The magnetic-latching TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, its small size and low coil power dissipation make the J0 & J relays some of the most versatile ultraminiature relays available. The Series J0D/JD and J0DD/JDD utilize discrete silicon diodes for coil suppression and polarity reversal protection. The Series J0/J magnetic-latching relays are ideally suited for applications where coil power dissipation must be minimized. The relays can be operated with a short duration pulse. After the contacts have transferred, no external holding power is required. The magnetic-latching feature of the Series J0/ J relays provide a memory capability, since the relays will not reset upon removal of coil power. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Magnetic-Latching Set & Reset Grounding Options J0. Resistive: A/Vdc J0 = Individual (M0/) 0. Inductive: 00mA/Vdc (0mH) J = Common J 0. Lamp: 00mA/Vdc Diode Options (M0/) J0D 00.0 Low Level: 0 to 0 ua/0 to 0 mv D = Internal diode for coil (M0/) 0. transient suppression JD (M0/) DD = Internal diode for coil D D D DD DD DD transient suppression and. Resistive: A/Vdc polarity reversal protection J0DD. Inductive: 00mA/Vdc (0mH) (M0/0) 0. Lamp: 00mA/Vdc Vibration Shock 0 g s 00 g s msec, JDD Low Level: 0 to 0 ua/0 to 0 mv (M0/0) 0. to 000 Hz half-sine Acceleration COIL A 0 0D COIL A 0DD COIL A 0 g s Operating & Storage: C to + C (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) COIL B (Bottom View) (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom View) D 0D 0D 0DD 0DD 0DD J0 J0D J0DD (Coil A Last Energized) (Coil A Last Energized) COIL B COIL B COIL B COIL A D COIL A DD COIL A H K (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom View) (Bottom View) (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom View) COIL A COIL A COIL A J JD JDD D (Coil A Last D D DD DD (Coil Energized) A (Coil Last Energized) A Last Energized) (Coil A Last (Coil Energized) A (Coil Last Energized) A Last Energized) DD H (Bottom H View) View) (Bottom View) (Coil A Last (Coil Energized) A (Coil Last Energized) A Last Energized) (Bottom View) K K K COIL B COIL B COIL B (Coil A Last 0 Energized) 0 0 (Coil A Last 0Energized) (Bottom iew) 0 0D (Coil A Last Energized) 0 0D 0D 0DD 0DD 0DD COIL B COIL A COIL A COIL A J JD JDD (Coil A Last (Coil Energized) A Last Energized) (Coil A Last (Coil Energized) A Last Energized) (Coil A Last Energized) (Bottom View) (Coil A Last Energized) (Bottom View) 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom View) (Coil A Last Energized) D D D DD DD DD (Coil A Last (Coil Energized) A (Coil Last Energized) A Last Energized) (Bottom View) (Coil A Last (Coil Energized) A (Coil Last Energized) A Last Energized) (Bottom View) Schematics Shown with Coil A Last Energized Schematics as viewed from terminals (Coil A Last (Coil Energized) A (Coil Last A Energized) Last Energized) (Bottom COIL View) A (Coil A Last (Coil Energized) A (Coil Last Energized) A Last Energized) (Bottom View) MILITARY QUALIFIED (JAN)

30 HIGH-PERFORMANCE RELAYS Series H, H & H Electromechanical Relays - High The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, these TO- relays are some of the most versatile ultraminiature relays available because of their small size and low coil power dissipation. The H Series high-temperature TO- relays are designed for reliable operation in elevated ambient temperatures up to 00 C. Special material selection and processing provide assurance of freedom from contact contamination and mechanical malfunctioning that might otherwise be caused by ultra high ambient temperature conditions. Typical applications: Oil exploration (down-hole) instrumentation High- industrial and process control instrumentation Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities H = DPDT Non-Latching H = DPDT Non-Latching H = DPDT Magnetic- Latching Coil Type H = Standard Coil H = Standard Coil H = Sensitive Coil Vibration 0 g s to 000 Hz Shock H = g s msec, half-sine H = g s msec, half-sine H = 00 g s Acceleration 0 g s Operating & Storage: C to +00 C H H H P.U.V (max.) Set & Reset. Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0.0 Lamp: 00mA/Vdc 00. Low Level: 0 to 0 ua/0 to 0 mv D.O.V min. max Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv HIGH-PERFORMANCE Schematics as viewed from terminals P.U.V = Pick-Up D.O.V = Drop-Out H H (Coil A Last Energized) H Page (00) (0) 00 TELEDYNE RELAYS

31 HIGH-PERFORMANCE RELAYS Series K & K Electromechanical Relays - High Shock The TO- relay, originally conceived and developed by Teledyne, has become one of the industry standards for low-level switching from dry circuit to ampere. Designed for high-density PC board mounting, its small size and low coil power dissipation make the TO- relay one of the most versatile subminiature relays available. The K Series high-shock TO- relays are designed to withstand shock levels up to 000 g s,. msec duration. Special material selection and construction details provide assurance that critical elements of the relay structure and mechanism will not be permanently displaced or damaged as a result of extremely high g level shocks. Typical applications: Commercial avionics aircraft control Commercial aircraft control systems Transportation systems (rail/truck) Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities K = DPDT Non-Latching K = DPDT Magnetic- Latching Vibration 0 g s to 000 Hz Shock K = g s msec, half-sine 000 g s, 0. msec axial plane, half-sine 000 g s, 0. msec side planes, half-sine K = 00 g s msec, half-sine 00 g s, 0. msec axial plane, half-sine 0 g s, 0. msec side planes, half-sine Acceleration 0 g s Operating & Storage: C to + C K K P.U.V (max.) Set & Reset. Resistive: A/Vdc 0. Inductive: 00mA/Vdc (0mH) 0. Lamp: 00mA/Vdc 00.0 Low Level: 0 to 0 ua/0 to 0 mv D.O.V min. max Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv K (Coil A Last Energized) K Schematics as viewed from terminals P.U.V = Pick-Up D.O.V = Drop-Out HIGH-PERFORMANCE 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

32 HIGH-PERFORMANCE RELAYS Series V & V Electromechanical Relays - High Vibration The V and V TO- relays, originally conceived and developed by Teledyne, have become the industry standards for low level switching from dry circuit to ampere in high-vibration environments. Designed for high-density PC board mounting, these TO- relays are some of the most versatile ultraminiature relay available because of their small size and low coil power dissipation. The V Series high-vibration relays are designed to withstand vibration levels of 0 to 0 g s at the frequencies noted, when tested on a resonant beam for 0 to 0 seconds, in the axis parallel to contact motion (x-axis), or 00 g s Hz for 0 minutes in the x-axis. A unique magnetic circuit prevents contact opening (chatter) in excess of 0 microseconds under vibration or shock conditions. Typical applications: Avionics aircraft control Aircraft control systems Transportation systems (rail/truck) Unique uni-frame design providing high magnetic efficiency and mechanical rigidity High force/mass ratio for resistance to shock and vibration Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities DPDT Non-Latching Coil Type V = Standard Coil V = Sensitive Coil Diode Options D = Internal diode for coil transient suppression DD = Internal diode for coil transient suppression and polarity reversal protection Vibration 0 g s at 0 ± Hz 0 g s at 0 ± Hz 0 g s at 00 ± Hz Shock 0 g s msec, half-sine Acceleration 0 g s Operating & Storage: C to + C V DV DDV V DV P.U.V (max.) D.O.V min. max Resistive: A/Vdc Inductive: 00mA/Vdc (0mH). 0.. Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc. 0.. Inductive: 00mA/Vdc (0mH). 0.. Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv Resistive: A/Vdc Inductive: 00mA/Vdc (0mH) Lamp: 00mA/Vdc Low Level: 0 to 0 ua/0 to 0 mv V V DV DV DDV HIGH-PERFORMANCE Schematics as viewed from terminals P.U.V = Pick-Up D.O.V = Drop-Out Page 0 (00) (0) 00 TELEDYNE RELAYS

33 APPENDIX: signal integrity eye diagrams SERIES RF00 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.0. ps. mv.0 ps.. ps SERIES GRF00 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv 0.0 ps.0. ps. mv. ps 0.. ps SERIES SGRF00 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv.0 ps..00 ps. mv. ps.0. ps 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

34 APPENDIX: signal integrity eye diagrams SERIES GRF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.. ps. mv 0. ps.. SERIES RF00/RF0 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv 0. ps.. ps 0. mv. ps..00 ps SERIES GRF00/GRF0 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv 0.0 ps.. ps. mv. ps.. ps Page (00) (0) 00 TELEDYNE RELAYS

35 APPENDIX: signal integrity eye diagrams SERIES SGRF00/SGRF0 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv.0 ps.. ps. mv 0. ps.. ps SERIES SRF00/SRF0 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.. ps. mv. ps..00 ps SERIES RF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.. ps. mv.0 ps..00 ps 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

36 APPENDIX: signal integrity eye diagrams SERIES GRF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv.0 ps 0.. ps. mv. ps.. ps SERIES SGRF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0. mv. ps.. ps. mv.0 ps..00 ps SERIES RF/RF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.. ps. mv.0 ps..00 ps Page (00) (0) 00 TELEDYNE RELAYS

37 APPENDIX: signal integrity eye diagrams SERIES GRF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0.0 mv. ps.. ps. mv 0. ps 0.. ps SERIES GRF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv 0. ps.. ps. mv. ps.. ps SERIES RF0 Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0. mv. ps. 0. ps. mv. ps. 0. ps 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

38 APPENDIX: signal integrity eye diagrams SERIES RF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0. mv. ps.. ps. mv. ps.. ps SERIES GRF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv.0 ps.. ps. mv. ps..00 ps SERIES RF0/RF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.. ps. mv 0. ps.. ps Page (00) (0) 00 TELEDYNE RELAYS

39 APPENDIX: signal integrity eye diagrams SERIES RF0/RF Normally Closed Normally Open +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.. ps. mv 0. ps.. ps SERIES A0 Attenuated Path Thru Path +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv. ps.0.00 ps 0. mv. ps. 0. ps SERIES GA0 Attenuated Path Thru Path +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps.0 mv. ps.. ps 0. mv. ps.0. ps 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

40 APPENDIX: signal integrity eye diagrams SERIES A Attenuated Path Thru Path +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps.0 mv. ps.. ps. mv.0 ps.. ps SERIES GA Attenuated Path Thru Path +0 mv +0 mv -0 mv -0 mv 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps 0 ps. mv.0 ps.. ps. mv. ps.0. ps PATTERN GENERATOR SETTINGS 0 Gbps Random Pulse Pattern Generator - PRBS signal PRBS output of 00mV P-P (nominal) RF PCB effect (negligible) not removed from measurement Data shown is typical of both poles Page (00) (0) 00 TELEDYNE RELAYS

41 RoHS and REACH CERTIFICATE OF COMPLIANCE RoHS It is hereby stated and certified that Teledyne Relays complies with the Restrictions on Hazardous Substances (RoHS) Directives to the extent herein: Teledyne Relays does not use any of the Restricted Substances specified by the RoHS Directives (listed below) as components in TO- and Centigrid Electromechanical Relay products, nor are these substances employed during any electromechanical relay manufacturing process: Lead Mercury Cadmium Hexavalent Chromium Polybrominated Biphenyls (PBB s) Polybrominated Diphenyl Ethers (PBDE s) However, upon request from the Customer, relay leads may be coated with solder, which contains 0% tin and 0% lead. REACH It is hereby stated and certified that Teledyne Relays complies with the Registration Evaluation Authorization and Restriction of Chemicals (REACH) Directives to the extent stated herein: Teledyne Relays is a manufacturer of articles. Teledyne Relays has taken the initiative to review the () substances that are under consideration for treatment as Substances of Very High Concern (SVHC) candidates. Teledyne Relays confirmed that our relays do not contain any of the listed substances in concentration >0.% weight per supplied article, substance or preparation weight. For Additional Information please us at: relays@teledyne.com 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

42 Appendix: TELEDYNE RELAYS PART NUMBERING SYSTEM RF Attenuator Relays Relay Series Attenuation Value (db) ( =. V) A0-0 - / S Q Q = Solder-Coated Leads G = Gold-Plated Leads (RoHS Compliant) R = RoHS Compliant Solder S = 0. Leads No Suffix = 0. Leads Relay Series Ground Pin Option (See Appendix A) * Not Applicable for GRF Relays RF Relays (Except Attenuator Relays) RF00 X - / S Q Q = Solder-Coated Leads G = Gold-Plated Leads (RoHS Compliant) R = RoHS Compliant Solder S = 0. Leads No Suffix = 0. Leads T R Established Reliability Relays ( =. V) Established Reliability Designator Relay Series Ground Pin Option (See Appendix A) Pad Option (See Appendix A) ( =. V) ER Y M - A / S Q Q = Solder-Coated Leads G = Gold-Plated Leads (RoHS Compliant) R = RoHS Compliant Solder S = 0. Leads W =. Leads No Suffix = 0. Leads Screening and Reliability Level (See Appendix B for Screening Options) Military (JAN) Designator Relay Series Ground Pin Option (See Appendix A) Pad Option (See Appendix A) Military Qualified (JAN) Relays J Z M - P L Screening and Reliability Level (See Appendix B for Screening Options) P = 0. Leads W =. Leads No Suffix = 0. Leads ( =. V) General Note: Parts ordered without suffix may be supplied with Solder-Coated or Gold-Plated leads Parts ordered with Solder-Coated leads will have (Sn0/Pb0) Parts ordered with RoHS Solder-Coated leads will have (Sn./Cu0.) Not Applicable to GRF relays Page 0 (00) (0) 00 TELEDYNE RELAYS

43 Appendix: TELEDYNE RELAYS PART NUMBERING SYSTEM Commercial Surface Mount Relays S - / R Relay Series Q = Solder-Coated Leads (Surface Mount Relays are Solder-Coated by default) R = RoHS Compliant Solder ( =. V) Commercial Relays, (Except Surface Mount Relays) Y M - / S Q Relay Series Ground Pin Option (See Appendix A) Pad Option (See Appendix A) Q = Solder-Coated Leads G = Gold-Plated Leads (RoHS Compliant) R = RoHS Compliant Solder S = 0. Leads No Suffix = 0. Leads ( =. V) High Performance Relays DV X M - / S G Relay Series Q = Solder-Coated Leads Ground Pin Option (See Appendix A) Pad Option (See Appendix A) G = Gold-Plated Leads (RoHS Compliant) R = RoHS Compliant Solder S = 0. Leads W =. Leads No Suffix = 0. Leads ( =. V) General Note: Parts ordered without suffix may be supplied with Solder-Coated or Gold-Plated leads. Parts ordered with Solder-Coated leads will have (Sn0/Pb0) Parts ordered with RoHS Solder-Coated leads will have (Sn./Cu0.) If you don t see what you re looking for in this Selection Guide, contact us! 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

44 APPENDIX: Spacer Pads Pad designation and bottom view dimensions Height For use with the following: Dim. H Max. Ø.0 [.] (REF) Dim H MAX ER, ERD, ERDD. (.), D, TN,.00 (.) RF00, RF0, RF0 ER0, ERD, ER0DD,, ERD, ERDD, ER, ERD,.0 (.) ERDD,, D, RF ERT, ERT, ER, ERD, ERDD.00 (0.), D, TN, RF0, RF, RF.0 (0.) M Pad for TO- RF.0 (.) ER, ERD, ERDD, ERT. (.) Dim H MAX ER, ERD, ERDD.00 (0.) RF.00 (.) M Pad for TO- RF.0 (0.), D.0 (.) Dim H MAX ER, ERD, ERDD, J, JD, JDD ER, ERD, ERDD, J, JD, JDD.00 (.).00 (0.) RF00. (.00) M Pad for Centigrid RF0.0 (0.). [.] (REF). [.] (REF) Dim H MAX C, A.0 (.) ERC, JC.00 (.) ERC, JC.00 (0.) RF0. (.) M Pad for Centigrid Notes:. Spacer pad material: Polyester film.. To specify an M or M spacer pad, refer to the mounting variants portion of the part numbering example in the applicable datasheet.. Dimensions are in inches (mm).. Unless otherwise specified, tolerance is ±.00 (. mm).. Add 0 mω to the contact resistance shown in the datasheet.. Add 0.0 oz. (0. g) to the weight of the relay assembly shown in the datasheet. A0.0 (.) Page (00) (0) 00 TELEDYNE RELAYS

45 APPENDIX: Spreader Pads Pad designation and bottom view dimensions.00 [.].0 [.].0 [.] MAX SQ.00 [.0] M Pad / /.0 [.] SQ.00 [.].00 [.].00 [.] Dim H MAX.0 [.] MIN Height.0 [0.] (REF) For use with the following: Dim. H Max. ERT, JT, ER, ERD ERDD, J, JD, JDD. (.) ERT, JT, D, TN. (.) ERT, JT, ER, ERD ERDD, J, JD, JDD. (.) ERT, JT, D, TN.0 (.) ER0, J0, ER0D, J0D ER0DD, J0DD, ER, J ERD, JD, ERDD JD, ERDD, JDD, ERT ER, ERD, ERDD J, JD, JDD. (0.). (.0).00 [.].00 [.].0 [.] Dim H MAX, D. (.) ER, ERD, ERDD, D. (.).00 [.].0 [.].00 [.] M Pad / /.0 [.] MAX SQ.00 [.0] M Pad / / /.0 [.].00 [.].00 [.].0 [.] Dim H MAX.0 [.] MIN ERT ER, ERD, ERDD. (.), D. (.) ER, ERD, ERDD, ERTX ERX, ERDX, ERDDX ERTX. (.) X, DX, TNX. (.) ER0X, ER0DX, ER0DDX ERX, ERDX, ERDDX. (0.) ERX, ERDX ERDDX, X, DDX ER, ERD, ERDD ERTX. (.) ERX, ERDX, ERDDX ERTX X, DX, TNX.0 (.) Notes:. Spreader pad material: Diallyl Phthalate.. To specify an M, M or M spreader pad, refer to the mounting variants portion of the part number example in the applicable datasheet.. Dimensions are in inches (mm).. Unless otherwise specified, tolerance is ±.00 (0. mm). /. Add mω to the contact resistance shown in the datasheet. /. Add.0 oz. (0. g) to the weight of the relay assembly shown in the datasheet. /. Add 0 mω to the contact resistance shown in the datasheet. /. Add 0.0 oz (0. g) to the weight of the relay assembly shown in the datasheet. /. M pad to be used only when the relay has a center pin (e.g. ERM-A, XM-.).0 [0.] (REF) 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

46 .00 [.].00 [.].00 [.].00 [.] "X" POSITION "X" POSITION APPENDIX: Ground Pin Positions "U" POSITION "U" POSITION (ERC and (ERC ERC and only) ERC only) Ø.00 [Ø.0] Ø.00 [Ø.0] "Z" POSITION "Z" POSITION "X" POSITION "X" POSITION "Z" POSITION "Z" POSITION Ø.00 [Ø.0] Ø.00 [Ø.0].00 [.] TO- Relays: ± ± "Y" POSITION "Y" POSITION "Y" POSITION "Z" POSITION.00 ERT, ER, ERT, ER0, ER, ER, ERT, [.] ER, ERT,, TN, 00H, 00K, 00V, RF00, RF0, RF, RF, RF0, RF, RF0, RF LEGEND: ± ± Glass Insulated Lead position TO- Relays: Ground ER, Pin ER, position RF, RF Either Ground Pin or Insulated Lead position depending on Relay type "Y" POSITION "Y" POSITION.00 [.].00 [.] "Y" POSITION "W" POSITION.00 [.] "Y" POSITION.00 [.] "Z" POSITION "Z" POSITION.00 [.] "X" POSITION.00 [.].00 [.] "U" POSITION (ERC and ERC only).00 [.] NØ.00 [Ø.0] N ION N N ION Centigrid Relays: RF0, ERC, C, ERC "Z" POSITION LEGEND: "X" POSITION LEGEND: Glass Insulated Lead position Glass Insulated Lead LEGEND: Indicates position Ground Pin ground position pin position Centigrid Relays: RF00, RF0, ER, ER, "Z" POSITION Ø.00 [Ø.0] NOTES. Terminal views shown. Dimensions are in inches (mm). Tolerances: ±.00 (±.) unless otherwise specified ± Indicates Glass Ground Insulated Pin glass position Lead position Either Ground insulated Pin or lead position Insulated Lead position. Ground pin positions are within.0 (0.) dia. of true position Indicates Ground Either depending Ground Pin ground position on "Y" Relay Pin pin or POSITION or type lead position depending Insulated on relay Lead type position. Lead dia. 0.0 (0.) nom. ±. Ground pin head dia., "Y" 0.0 POSITION (0.) ref: height 0.00 (0.) ref. Either depending Ground on Pin Relay or type Insulated Lead position Page depending on Relay type (00) (0) 00 TELEDYNE RELAYS

47 APPENDIX: Teledyne Relays T R Program Teledyne Relays program was developed to provide the JAN relay user an alternate means of specifying and procuring established reliability relays. The form, fit and function of a relay is the same as that of its JAN counterpart. program requirements differ in certain regimens/tests found in both MIL-PRF- and MIL-PRF-0 that add cost but no value to the relay. This program parallels the military specifications in most aspects. The components that make up such a program are intricate and varied. Furthermore, there are additional options of high value for design, manufacturability and operation of high reliability assemblies. The following page presents a table that compares the 00% screening performed on JAN relays and relays prior to shipment. Other significant highlights of the program include: Two unique screening levels The ability to define lead finish Spacer pad options which may not be available in military specifications Ground pin options which may not be available in military specifications Reduced lead time Reduced cost The program is fully defined for both general product requirements and detailed product requirements in the following Teledyne Relays specifications: TR-R- TR-STD- TR-STD- TR-ERL- TR-R-/XXX TR Supplement Copies of these documents are available from Teledyne Relays. We suggest that users check with Teledyne Relays from time to time to assure that they have the latest issue. Can t Find What You Need? Check out our full line of relays and switches. Order literature online at 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

48 APPENDIX: Teledyne Relays T R Program INSPECTION A Level.%/0K Cycles Screening Levels B Level.%/0K Cycles JAN L Level %/0K Cycles JAN M Level %/0K Cycles Subgroup Screening, Internal Moisture AQL Vibration (Sinusoidal) AQL Vibration (Sinusoidal) 00% Screening, Burn-In (Hybrids only) Screening, Run-In (Room ) Screening, Run-In (+ C and C) Subgroup Coil or Coil Current Insulation Dielectric Withstanding Static Contact Pickup and Dropout or Set and Reset Operate and Release or Set and Reset Time Hold Turn-On and Turn-Off Time (Hybrids only) Contact Bounce Time Contact Stabilization Time Turn-On Current (T Hybrids only) Turn-On (C Hybrids only) Turn-Off (Hybrids only) Coil Transient Suppression (D, DD and Hybrids only) Diode Blocking Integrity (DD only) Zener (C Hybrid only) Neutral Screen (Latching Relays only) Break Before Make Verification Contact Simultaneity Subgroup Solderability Samples per Daily Solderability Inspection Lot Leak Test External Visual and Mechanical Inspection /Lot for Dimension and Weight Check AQL = Acceptable Quality Level Page (00) (0) 00 TELEDYNE RELAYS

49 Teledyne Relays HI-REL Program Teledyne Relays: Because in deep space there is no acceptable failure rate Teledyne Relays has a long history of supplying High Reliability relays for use in space bound vehicles. From the earliest deep space probes, such as Voyager I, now nearing billion miles out in space, to the next generation of probes scheduled for the future, Teledyne Relays continues to be the preeminent supplier of Hi-Reliability relays to the space market. Teledyne Relays Hi-Reliability Specification: TR-HIREL- Eliminates the need for customers to develop and maintain specifications. Manufacturing and Quality Assurance requirements are fully defined and documented. Meets the general requirements of both ESA/SCC and NASA/GSFC documents. Offers options for 00% Group A screening Offers options for levels of Lot Acceptance Testing (LAT). Teledyne Screening Document 0-0- NASA approved screening regimen based on NASA/GSFC S--P. s TO- Magnetic-Latching Relays TO- Non-Latching Relays TO- Magnetic-Latching, High-Shock Relays TO- Non-Latching, High-Shock Relays TO- Non-Latching, High-Vibration Relays Hi-Rel Screening Capabilities 00% Open Electrical Inspection 00% Precap Inspection Fully Automated Small Particle Inspection (Millipore Clean) Asynchronous Miss Test Coil Continuity Sine Vibration Random Vibration High/Low Run In (Miss Test) C ± C Radiographic Inspection Mechanical Shock Test Thermal Shock Test Acceleration Radiographic Inspection (X-ray) Mechanical Shock Test Thermal Shock Test Acceleration Load Banks for a Variety of Life Test Load Serialized Printed Electrical Data Continuous Life Testing Environmental Testing Vertical Integration For information or answers to your questions, please visit our website. 00 TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

50 APPENDIX: Authorized Distributors NORTH AMERICA ALLIED ELECTRONICS Tel: (00) ASAP ELECTRONICS Tel: (00) - AVNET Tel: (00) - MASTER DISTRIBUTORS Tel: () - MOUSER ELECTRONICS Tel: (00) - RICHARDSON ELECTRONICS Tel: (00) - SHERBURN ELECTRONICS Tel: (00) -0 BELGIUM & LUXEMBOURG Nijkerk Electronics B.V. Tel: + (0) 0 alain.huysmans@nijkerk.be CHINA & HONG KONG Fiaco Microelectronics Beijing Office Tel: beijing@fiaco.com Bright Toward Industrial Co., Ltd. Beijing Office Tel: linden_wang@toward.com.cn CZECH REPUBLIC Amtek spol. s.r.o. Tel: +0 amtek@amtek.cz DENMARK ARROW Denmark A/S Tel: + (0) 00 jbh@arrownordic.com ESTONIA ARROW Estonia Tel: estonia@arrownordic.com FINLAND ARROW Finland Oy Tel: + FRANCE ARROW France Tel: ralves@arrowfrance.com GERMANY Adelco Elektronik GmbH Tel: + (0) adelco@t-online.de Hot Electronic GmbH Tel: + (0) info@hot-electronic.de MRC Components ohg Tel: + (0) 0 info@mrccomponents.de Zettler electronics GmbH Tel: + (0) office@zettlerelectronics.com INDIA Specsynergy Technologies, Inc. San Jose, CA (Main Office) Tel: (0) - x0 karthik@spectraus.com Specsynergy Technologies, Inc. New Delhi Office Tel: 0 malik@specsynergytech.com ISRAEL STG International Ltd. Tel: + (0) 00 davidb@stggroup.co.il ITALY SINCRON s.r.l. Tel: ermanno.baschieri@sincron.it JAPAN Comcraft Corporation Tokyo Tel: trcsales@comcraft.co.jp Comcraft Corporation Osaka Tel: trcsales@comcraft.co.jp KOREA Electro-Comm USA Tel: () -0 briansong@anyeparts.com Electro-Comm SEOUL Tel: tony_jang@anyeparts.com LATVIA ARROW Latvia Tel: latvia@arrownordic.com LITHUANIA ARROW Lithuania Tel: lithuania@arrownordic.com MALAYSIA Device Electronics PTE, Ltd. Tel: (0) 0 / ngthomas@devicelect.com NETHERLANDS Nijkerk Electronics B.V. Tel: + (0) 0 alain.huysmans@nijkerk.be NORWAY ARROW Norway A/S Tel: + (0) 0 stondevoldshagen@arrownordic.com RUSSIA Petersburg Electronic Company JSC Tel: + dkizha@pec.spb.ru SINGAPORE Device Electronics PTE, Ltd. Tel: - ngthomas@devicelect.com SOUTH AFRICA RF Design Tel: National Smart Call: 0 Cape Town: + (0) 00 Gauteng: + (0) 00 Durban: + (0) SWEDEN ARROW Sweden Tel: aekstrom-winroth@arrownordic.com MicroComp Nordic AB Tel: info@microcomp-nordic.se OEM Electronics Tel: + ulf.nygren@oemelectronics.se SWITZERLAND ENA AG Tel: + rolf.hochstrasser@ena.ch TAIWAN Bright Toward Industrial Co., Ltd. Tel: philip@relays.com.tw UNITED KINGDOM Advanced Power Components plc Tel: + (0) angiep@apc-plc.co.uk www. apc-plc.co.uk Arrow Electronics UK Ltd. Tel: + (0) Willow Technologies Ltd. Tel: + (0) sales@willow.co.uk 00 Electronic Components Ltd. Tel: + (0) 00 sales@00elec.co.uk Page (00) (0) 00 TELEDYNE RELAYS

51 APPENDIX: Authorized North American Representatives Sea-Port Technical Sales Jay Stone Associates Washington Oregon No. California So. California Cain Technology Nevada Idaho Utah Arizona Westrep Arizona Montana Wyoming Colorado New Mexico Synergy Sales North Dakota South Dakota Nebraska Minnesota Iowa Essig & Assoc. MINK Associates Kansas Texas Oklahoma Missouri Arkansas LA Wisconsin Illinois EK Associates Michigan IN Tennessee Ohio Kentucky ERI MS AL Georgia RPI-Apex WV North Carolina SC FL PA Virginia New York VT MacInnis NH Maine MA CT So. NJ DE RI MD Eagle Sales Precision Marketing Comp Tech CentraMark Technical Associates HHP Associates REPRESENTATIVES Cain Technology Southern California Townsgate Road, Suite 00 Westlake Village, CA Tel: 0--0 Fax: Cee-Jay Micro Ltd. Eastern Canada Terence Matthews Crescent Unit Kanata, Ontario Canada KM A Tel: -- CentraMark Technical Sales Associates TX, OK and LA Naaman School Road Garland, TX 00 Tel: -- Fax: -- Comp-Tech Sales Northern New Jersey, Metro New York, Long Island Boulevard, Suite Hasbrouck Heights, NJ 00 Tel: (0) -00 Fax: (0) - Eagle Sales Corporation MD, VA, WA DC, Eastern PA, Southern NJ Ellicott Mills Drive, Suite 0 Ellicott City, MD 0 Tel: (0) 0- Fax: (0) 0- EK & Associates, Inc. IL, WI E. Wilmette Road, Suite J Paltine, IL 00 Tel: -- Fax: -- Electronic Representatives, Inc. IN, OH, MI, KY, West PA 0 Lake Plaza Drive, Suite D0 Indianapolis, IN 0 Tel: () - Fax: () - Essig & Associates, Inc. Iowa 0 N. Compton Drive Hiawatha, IA Tel: () -0 Fax: () - HHP Associates, Inc. Florida S. International Pkwy, Suite Lake Mary, FL Tel: 0-- Fax: Jay Stone & Associates Northern California 0 O Toole Avenue, Suite M San Jose, CA Tel: Fax: The MacInnis Company ME, NH, RI, CT, MA, VT Vanderbilt Avenue Norwood, MA 00 Tel: () -00 Fax: () -0 MINK Associates NE, KA, MO 000 Santa Fe, Suite Overland Park, KS Tel: () -0 Fax: () -0 Precision Marketing Incorporated MS, AL, TN, GA,NC and SC Wiles Road, Suite 0 Coconut Creek, FL 0 Tel: () -00 Fax: () - RPI-Apex Associates, Inc. Upstate New York (excluding Long Island) Andover Street Andover, MA 00 Tel: --0 Fax: -- Sea-Port Tech Sales WA, OR, ID, Western Canada 0 0th Ave. NE Bellevue, WA 00 Tel: () 0-00 Fax: () 0- Synergy Sales Representatives, Inc. MN, ND, SD 0 Gamble Drive, Suite #0 St. Louis Park, MN Tel: () - Fax: () - Westrep Arizona AZ, NM, Clark County, NV & El Paso, TX 0 S. Ash Avenue, Suite A Tempe, AZ Tel: (0) 0- Fax: (0) TELEDYNE RELAYS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page

52 HEADQUARTERS Daphne Ave. Hawthorne, CA 00 Phone: () -00 or (00) -00 Fax: () - relays@teledyne.com (00) -00 EUROPE - Napier Road Wardpark North Cumbernauld G OEF Scotland UK Phone: + (0) Fax: + (0) 0 sales_europe@teledyne.com + (0) PRINTED IN U.S.A. TR0