SL2-G312 multi-satellite certified

Transcription

1 1 SL2-G312 multi-satellite certified Now with Voice Communications! 16 INDEPENDENT MEASUREMENTS: 4 Analog Inputs, SDI-12, Tipping Bucket, & more (page 2...) Built-In Logger Pocket PC (PDA) GOES High Data Rate 100/300/1200 bps GOES International INSAT/METSAT METEOSAT 2nd Gen. (MSG) GMS /MTSAT FY2C ARGOS/SCD GEOSTATIONARY SATELLITE TRANSMISSION FORMATS SATLINK2 ADVANTAGES SatLink2 s innovative design includes everything needed to collect high quality data, without costly options. Our standard unit includes a Built-in Logger, SDI- 12 Interface, dedicated Tipping Bucket Input, 4 Analog Inputs, & a powerful Mathematical Equation Editor. NEW easiest set-up & operation Intuitive data view makes set up & data collection incredibly straightforward. accuracy You ll collect & transmit data more accurately and with the lowest power consumption available! Front Panel Programming Min/Max Processing Process Non-Linear Sensors - simply copy & paste a formula without any programming! SL2 Display includes SD Card slot for Log Downloads Two-Level Password Protection SatLink2 - Enclosure Option airtight enclosure & interactive display*

2 2 SL2-G312 features SATLINK2 BASIC FEATURES SatLink2 Meteorological Station SL2 SD CARD ADVANTAGES Multiple choices for downloading the log from SatLink2: download all data since the last download, download the entire log, or download a range of dates. SL2 setup can be saved on the SD card to use to setup another SL2 A setup can be prepared on a PC using SatLink Communicator, saved to the SD card, and uploaded to a SatLink2 from the SD card. Forward & Reflected RF Power Measured. Scheduled & Random Reporting & Alarm Detection Easy integration with Existing &/or New Sensors as well as Existing &/or New Loggers Easy Data Merge - Logs its own measurements & receives data from other loggers, especially Sutron s 8210, 8080 Xpert, 9210 XLite, 8400 & 8200 User programmable from all PCs Trimble GPS w/fast satellite acquisition every unit Gain setting options on analog inputs Internal flash log Baud.) Standard RS-232 Interface to Datalogger Quick & easy firmware & field upgrades Powerful mathematical equation editor - analog data conversion with polynomial & trigonometric support port SDI-12 Support for vast array of sensors Switched +12Vdc Output Text Messages, Manual Data Entry Internal Diagnostics - transmission quality & GPS Reference voltage output for direct thermistor support programs. SATLINK2 DISPLAY & SD CARD FEATURES SatLink2 Display (ordered separately, attach to basic SL2) Front Panel Access to SatLink Allows User to Start/Stop SatLink View Current Status View Current Set-up Fully Set-up Transmissions Initiate Transmissions Fully Set-up Sensor Measurements Calibrate Sensors View Current & Previous Measurements Use Two Levels of Password Protection SD Card Interface Allows User to Download Entire SatLink Log (or Any Part of It) Increase Logging Capacity & Data Redundancy (when card is left inserted, SL2 backs up Log to Card) Save SatLink Set-Up Send Saved Set-Up from Card to SatLink

3 3 ORDERING & ACCESSORIES Part # Satlink2 configuration Basic SL2 XLite Display Enclosure Modem PCMCIA Option Amplifier SL2-G312-1 Basic SatLink2 SL2-Display-1 Display only (w/sd Card Slot) SL2-Display-2 Display+Internal Modem (w/sd Card Slot) SL2-ENC SatLink2 w/nema 4 Enclosure SL2-ENC-DISP-1 SatLink2, Display, Enclosure SL2-ENC-DISP-2 SatLink2, Encl., Display & Modem 9210-SL2-1A Satlink2 & XLite Datalogger 9210-SL2-2A SatLink2, XLite, PCMCIA 9210-ENC-SL2 SatLink2, XLite, Enclosure SL240W SatLink2 with 40 Watts for Buoy Applications NOTE: Sutron recommends installing Satlink 2 in a NEMA 4 enclosure for any humid or hostile environment. Sutron recommends using an optional lightning protection module such as the Sutron for most remote systems. Part # Peripherals SDI-12 Analog Plus Module Bluetooth CSA, Standard M SD Card (SL2 Display includes slot) Tipping Bucket Rain Gauge Adapter for SL2 Logger INSTALLATION KITS, MOUNTING KITS, CABLES, CONNECTORS Mounting Hardware, Enclosure Mounting Kit, RG Tipping Bucket to 2 Pipe Mounting Kit 8210/SL2/SP Modem Mounting Kit 8210/SL2 no modem bracket Mounting Kit for use with Bullet Antenna Cable Assembly, Semi-Rigid, Low Loss, 15 ft, Antenna Cable Assembly, Antenna, 15 ft** Cable, 5M for use with Bullet Antenna Cable 10M for use with Bullet Antenna Solar Panel Mount (53 W Panel) Tower Mount Arm for Bullet Antenna(Uni- Strut Solid Wall) Mounting Hardware, Antenna to tower Mounting Kit, Tipping Bucket to Tower Type N Connector LIGHTNING PROTECTION RF COAX Cable Lightning Protection Kit. Bulkhead mount, 36 RG-58 N to N cable (for mounting in NEMA enclosure) Protector, Coax Kit with Cable (wall/panel mount) Connector, Heliax, 7/8 to N-Male Lightning Protection Module Antennas OMNI-Directional Satellite Antenna, Half-Wave OMNI Satellite Antenna, Full-Wave YAGI Antenna, Crossed, MHz, 11dB gain, 2 pipe mount, Type N Connector YAGI Antenna, Stainless Steel Elements, Crossed, MHz, 11dB gain, 2 pipe mount, Type N Connector GPS Antenna, SMA with 15 ft. cable YAGI Antenna, 402 MHz (formerly # ) YAGI Antenna, Stainless Steel, 402 MHz (formerly # ) YAGI GOES Satellite Antenna YAGI GOES Satellite Antenna, Stainless Steel Mast & Elements GPS Antenna, Bullet (High Gain) , , Power Supply Battery, 12VDC: 7 AH, 24 AH, 105 AH Battery Charger, Float Solar Panel, 53 Watts (Mount & Cable ordered separately) Solar Panel, 20 Watts unregulated, includes Mount (Cable ordered separately) Solar Panel, 10 Watts unregulated including 10 ft. Cable & Mount Solar Panel Charger Control, 4 amp Solar Panel Charger Control, 8 amp Solar Regulator, 3 amp

4 4 logger specifications Applies to all SatLink2 versions unless otherwise noted Analog Inputs A/D Resolution A/D Accuracy Temperature Coeff Linearity Reference Output MeasurementS 4 single ended (0-5V, differential ratiometric selectable) 24 bit A/D converter +/- 0.02% +/- 0.03% 25 during TX +/- 5 ppm/c typ. +/- 10 ppm/c max +/ % FS Switched +12V Out 500 ma. Nom Tipping Bucket / PULSE COUNTER internal measurement Solar Panel Charging Status enclosure humidity measurement 2.5 Volt, 10 ma. max (for temp. sensors) Dedicated switch closure counter input, 16 bit resolution Battery Voltage & Temperature Optional Optional SDI-12: V1.0, V1.1, V1.2, V1.3 sensors Sensor Support Schedules Sensor Labels Mathematical Equation Editor Readings Supports 10 sensors or measurements Independent for each sensor User enterable For analog sensor data conversion allows user entry of virtually any equation Manually Entered Log Readings 120,000 Time stamp Individually w/1 sec. resolution Number range Can log numbers as small as 1E- 38 or as large as 3E+38 Quality flag Memory log Data Merge Mode Circular Buffer Mode Types One for Each Data Sample Non-volatile Flash Supports merging of SL2 Logger data with data from external logger Enhanced transmission data mgt. Excess data is stored & sent on subsequent transmissions. Alarms High, Low & Rate of Change Alarms Specifications Subject to Change without Notice Sensor Differentiation GOES 100, 200, 1200 User configurable for each sensor Satellite Support METEOSAT 2nd Gen (MSG) INSAT ARGOS/SCD FY2 Random Reporting TRANSMISSION SUPPORT Self-Timed SHEF SHEFFIX Pseudo Binary Configuration Storage Data Collection Set-Up Utility Time Clock Accuracy Miscellaneous Non-Volatile Visual Indication Window-Based GPS Support for Accurate Time Max +/- 0.1 seconds with GPS (4 seconds/month without GPS) SatLink2 & XLite Datalogger combined Station

5 5 transmitter specifications Max Data Rate Power Off Auto Power Error Correction Data Compression Weight Size Environmental Operating Voltage LED Indicators Power GPS RS232 SDI-12 Tipping Bucket Analog Input Timekeeping Quiescent Transmitting 100/300 BPS Transmitting 1200 BPS or 0081 OPTIONAL INTERNAL MODEM (WITH DISPLAY ONLY) 33.6 kbps Special power saver circuitry to power off while inactive Auto power up on ring v.42, MNP2-4 & 10-EC V.42 bis & MNP-5 data compression 2.2 lbs in. x 7.70 in. x 1.75 in. (not including mounting ears) -40 C to +65 C 10.4 to 15 VDC, reverse voltage protected Status, Fault & Transmit Connections Built-in cable SMA (Bulkhead Mounted) DB9 5 position removable terminal strip 5 position removable terminal strip 7 position removable terminal strip Accurate within 10 ms. Frequency discipline to within 10Hz typ Power Requirements (@ 12.5 VDC) 6 ma (typ) 3.2 Amps (typ) 4.2 Amps (typ) Recommended Antenna INSAT YAGI Sutron YAGI, 10.5 db gain (-0081 ss) INSAT YAGI, stainless steel Transmission Format SHEF & Pseudo Binary formats INSAT 422 bit format Meteosat CE approved Transmission Modes 100 BPS GOES random and self-timed 300 BPS GOES random and self-timed 1200 BPS GOES random and self-timed 4800 BPS INSAT selectable 10 min. window (3 randomized repeat sequence) METEOSAT Alert & Self Timed ARGOS/SCD Format SL2 TRansmitter Output Power Software selectable power levels 7.0 Watt nominal, 100/300 BPS 14.0 watt nominal 1200 BPS 3.5 watt (adjustable to 18 watt) INSAT 2 Watt output for ARGOS,SCD Protection against open or short circuit loads on transmitter output Specifications Subject to Change without Notice Stand-Alone Rainfall Station

6 6 SatLink2 rainfall station stand-alone 10 INDEPENDENT MEASUREMENTS: 4 Analog Inputs, SDI-12, Dedicated Tipping Bucket Input Built-In Logger Combines with Existing &/or New Sensors as well as Existing &/or New Loggers User programmable from all PCs Gain setting options on analog inputs SDI-12 Support Facilitates a vast array of sensors Switched +12Vdc Output Powerful mathematical equation editor - analog data conversion with polynomial & trigonometric support Reference voltage output for direct thermistor support Basic SatLink2 Features Text Messages, Manual Data Entry Displays Station Name Adds dual communication capability to SatLink2 View Data Display/Set INSAT ID, Channel, Transmission Time Menus & submenus organized in a tree Readable in direct sunlight and in darkness 3 RS232 ports (one to connect to Satlink 2, one to a PC or PDA, & one to an external modem) Forward & Reflected RF Power Measured. Scheduled & Random Reporting & Alarm Detection Easy Data Merge - Makes & logs its own measurements & receives data from other loggers Trimble GPS w/fast satellite acquisition every unit Internal flash log Baud.) Easy integration with Sutron 8210, 8080 Xpert, 9210 XLite, 8400 & 8200 Dataloggers Quick & easy firmware & field upgrades w/serial port Internal Diagnostics - transmission quality & GPS Standard RS232 Interface to Data Recorder satlink2 display features Displays Date & Time Calibrate Sensors - Password Protected Enter Data Manually Force an INSAT Transmission Display: 2 line x 20 character LCD w/backlight Keypad: 6 keys w/large sealed embossed keys (UP, DOWN, RIGHT, LEFT, ON/OFF, SET) Power: 9-15VDC thru pin 9 of DB9 or separate 2 pin connector. <0.5 ma standby. Optional internal modem Dimensions: 5 1/2 x 6 1/2 x 1 Operating temperature: -40 o C to +60 o C, LCD Display -20 o C to +60 o C

7 7 Optional GPS Antenna Option 1: Jam-Resistant GPS antenna The Bullet Antenna is recommended for applications where interference near the GPS frequency band might cause jamming or loss of GPS reception. The antenna is also suited for marine environments and any application where a more rugged antenna is required. This antenna has a TNC connector allowing the use of special length cables where required. (Mounting hardware not included.) Order Sutron Part # FAQs Option 2: mounting kit for jam-resistant gps antenna This kit is designed to mount to existing Uni-Strut type mounting arms used at many stations. Included are a 4 inch stainless steel threaded pipe with a pair of Uni-Strut mounting brackets with hardware for mounting to a Uni-Strut tower arm. (This kit does not include the Uni-Strut arm on the tower, see below.) Order Sutron Part # Option 3: tower mount arm (uni-strut solid wall) for gps antenna Length is 38 inches. Plating is Hot Dipped Galvanized. Remember to place the antenna in an open sky view location, i.e. away from the tower as much as possible. Order Sutron Part # Option 4: antenna cable for gps antenna A low-loss RG-59 cable is provided with a TNC-male connector on one end and an SMA-male on the other end. Two lengths are available although the 5 meter is the preferred length if the extra length is not necessary: 5 Meter Length Order Sutron Part # Meter Length Order Sutron Part # For maximum possible unattended lifespan when installing your station, please consider these FAQs. The GPS Bullet Antenna is a viable option when the cable length of the magnet mount antenna is not sufficient, the Bullet Antenna should be used. The new standard cable lenths for this antenna are 5 or 10 meters. (There is sufficient gain to go further although not supported.) 2....when an application requires a more robust cable (i.e., direct exposure to the elements), this antenna option provides a UVrated cable approximately 0.3 inches in diameter in heavy urban environments or when nearby transmitters may overload a standard mag antenna, the Bullet inside filtering helps with interference issues. 4. The Bullet Antenna should be used in any location where the antenna must be mechanically mounted. Application examples include buoys, towers, ocean exposure, or anywhere with high winds or other problems that might move a magnetic antenna. Can I still use the standard magnetic antenna? Yes, the standard magnetic antenna is still a good performer. When mounting the standard antenna, consider: 1. Conduit for the tiny cable if there is direct outdoor exposure. The small size of the cable can allow for rodent damage or damage from branches rubbing, etc if installed directly. 2. Mount the antenna so it may be protected from any weather events that may dislodge the antenna. Different installation conditions may require other adjustments or options. Please contact Sutron Sales or Customer Service if you have any questions, (703)

8 8 SatLink2 40W transmitter sl2-b40w-1 Ideal for Buoy Applications Pocket PC Communications 4 Analog & Up to 10 SDI-12 Interfaces The SL2-B40W-1 has been certified at 40 Watts on GOES 100/300/1200 bps and International DCS (GOES/ METEOSAT/GMS) The 40 Watt power level is highly suited for operation on a moving platform or station, such as a buoy, that requires a low gain omni-directional antenna. SatLink2 40 Watts may be used with an optional, nonmounted display: Adds dual communication capability to SatLink2 Dimensions: 5 1/2 x 6 1/2 x 1 Optional internal modem Can force a transmission Communications: 3 RS232 ports (one to connect to Satlink 2, one to a PC or PDA, & one to an external modem) SL2-B40W-1 NESDIS Certified for 40 watts (Fixed) output for 100, 300 &1200 bps Domestic Scheduled or Random Transmissions International Channel Operation Operation certified for use with 3 or 3.5 db gain omnidirectional antenna. Ideal for Buoy Applications providing typical uplink EIRPs of 49dBm or 50dBm with typical cables. No additional operator setup fields required for operation User programmable from Pocket PC, desktop/laptop PC Built-in logger - 120,000 readings from any sensor to Flash Memory 4 Analog Inputs for singleended & differential input sensors Gain setting options on Analog inputs SDI-12 support facilitates a vast array of sensors Reference voltage output for direct thermistor support Internal flash log can be Baud. DC power cables provided Basic Features Forward and reflected RF power measured. Powerful mathematical equation editor for analog sensor data conversion with polynomial & trigonometric support Dedicated Tipping Bucket Input Scheduled & random (event driven) reporting & alarm detection Easy Data Merge allows SatLink to make & log its own measurements AND receive data from another logger Every unit includes Trimble GPS module with fast satellite acquisition Standard RS232 interface to data recorder Easy integration with Sutron 8210, 8080 Xpert, 9210 XLite, 8400 & 8200 Dataloggers Serial port for quick and easy firmware & field software upgrades Internal diagnostics to monitor transmission quality and GPS performance Text messages & manual data entry For specifications, please request separate SatLink2 40 Watts Datasheet.