Vishay Dale Wirewound Resistors, Military/Established Reliability MIL-PRF Qualified, Type RER, R Level FEATURES

Size: px

Start display at page:

Download "Vishay Dale Wirewound Resistors, Military/Established Reliability MIL-PRF Qualified, Type RER, R Level FEATURES"

Giles Parker
6 years ago
Views:

1 ERH, ENH Vishay Dale Wirewound Resistors, Military/Established Reliability MIL-PRF Qualified, Type RER, R Level FETURES luminum heat sink housing Molded construction for total environmental protection Qualified to MIL-PRF Complete welded construction vailable in non-inductive styles (type ENH) with ryton- Perry winding for lowest reactive components Mounts on chassis to utilize heat-sink effect STNDRD ELECTRICL SPECIFICTIONS POWER RTING MODEL MIL-PRF P MILITRY WEIGHT 2 C W RESISTNCE RNGE (Typical) TYPE ± 1% MOUNTED FREE IR Ω g ENH- RER k 3.3 ENH- RER k 8.8 ENH-2 RER k 16. ENH-0 RER k 3 ERH- RER k 3 ERH- RER k 6 ERH-2 RER k 13 ERH-0 RER k 28 TECHNICL SPECIFICTIONS PRMETER UNIT ERH, ENH RESISTOR CHRCTERISTICS Temperature Coefficient ppm/ C ± 0 for 0.1Ω to 0.99Ω, ± 0 for 1Ω to 19.9Ω, ± 20 for 20Ω and above Dielectric Withstanding Voltage V C 00 for ERH- ERH- and ERH-2, 2000 for ERH-0 Short Time Overload - x rated power for seconds Maximum Working Voltage V (P x R) 1/2 Insulation Resistance Ω,000 Megohm minimum dry, 00 Megohm minimum after moisture test Terminal Strength lb pull for ERH- and ERH-, pull for ERH-2 and ERH-0 Solderability - Meets requirements of NSI J-STD-002 Operating Temperature Range C - /+ 20 ORDERING INFORMTION RER0 MILITRY TYPE F TOLERNCE 49R9 RESISTNCE R FILURE RTE 138 For technical questions, contact ww2bresistors@vishay.com Document Number Revision 18-Oct-00

2 Wirewound Resistors, Military/Established, Reliability ERH, ENH Vishay Dale DIMENSIONS D C M N F E J H G P MODEL C D E F G H J K L M N P ERH ENH- ± 0.00 ± 0.00 ± ± ± 0.01 ± 0.01 ± 0.01 ± 0.0 ± 0.0 ± 0.0 ± 0.00 ± 0.01 ± 0.00 ± [ [12.40 [1.240 [28.80 [8.480 [16.4 [8.130 [1.60 [3.380 [1.980 [2.360 [1.980 [1.270 [6.760 ± 0.127] ± 0.127] ± 0.787] ± 1.70] ± 0.381] ± 0.381] ± 0.381] ± 0.24] ± 0.24] ± 0.24] ± 0.127] ± 0.381] ± 0.127] ± 1.70] ERH ENH- ± 0.00 ± 0.00 ± ± ± 0.01 ± 0.01 ± 0.01 ± 0.0 ± 0.0 ± 0.0 ± 0.00 ± 0.01 ± 0.00 ± [ [1.880 [19.00 [ [.670 [ [9.9 [1.900 [4.190 [2.360 [2.390 [2.90 [2.160 [7.920 ± 0.127] ± 0.127] ± 0.787] ± 1.70] ± 0.381] ± 0.381] ± 0.381] ± 0.24] ± 0.24] ± 0.24] ± 0.127] ± 0.381] ± 0.127] ± 1.70] ERH ENH-2 ± 0.00 ± 0.00 ± ± ± 0.01 ± 0.01 ± 0.01 ± 0.0 ± 0.0 ± 0.0 ± 0.00 ± 0.01 ± 0.00 ± [ [ [ [ [ [ [ [1.900 [.870 [4.370 [3.180 [2.920 [2.160 [ ± 0.127] ± 0.127] ± 0.787] ± 1.70] ± 0.381] ± 0.381] ± 0.381] ± 0.24] ± 0.24] ± 0.24] ± 0.127] ± 0.381] ± 0.127] ± 1.70] ERH ENH-0 ± 0.00 ± 0.00 ± ± ± 0.01 ± 0.01 ± 0.01 ± 0.0 ± 0.0 ± 0.0 ± 0.00 ± 0.01 ± 0.00 ± [ [ [ [ [ [ [1.490 [2.240 [6.600 [4.980 [3.180 [2.720 [2.160 [ ± 0.127] ± 0.127] ± 0.787] ± 1.70] ± 0.381] ± 0.381] ± 0.381] ± 0.24] ± 0.24] ± 0.24] ± 0.127] ± 0.381] ± 0.127] ± 1.70] MTERIL SPECIFICTIONS Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Ceramic, steatite or alumina, depending on physical size Encapsulant: Silicone molded construction Housing: luminum with hard anodic coating End Caps: Stainless steel Standard Terminals: Tinned Copperweld Part Marking: Source Code, JN, Military PIN, Date/Lot Code PPLICLE MIL SPECIFICTION MIL-PRF-39009: This is the military specification covering housed chassis mount established reliability power wirewound resistors. Vishay ERH and ENH resistors are listed as qualified on the MIL-PRF QPL. PERFORMNCE K L DIMENSIONS in inches [millimeters] MIENT TEMPERTURE IN C Derating POWER RTING Vishay ERH and ENH resistor wattage ratings are based on mounting to the proper heat sink. ERH- and ERH-: 4" x 6" x 2" x 0.040" thick aluminum chassis ERH-2 and ERH-0: " x7" x 2" x 0.040" thick aluminum chassis TEST CONDITIONS OF TEST TEST LIMITS Low Temperature Operation pply rated power until thermal stability, remove power subject to air ± (0.% Ω) R temperature of - C for 1 to 30 minutes Short Time Overload x rated power for seconds ± (0.3% Ω) R Dielectric Withstanding Voltage 00Vrms (RER 40, 4, 0, 60, 6, 70), 2000Vrms (RER and 7), ± (0.2% Ω) R one minute duration Low Temperature Storage - C for 24 hours ± (0.3% Ω) R High Temperature Exposure 20 C for 2000 hours ± (1.0% Ω) R Moisture Resistance MIL-STD-202 Method 6 ± (0.% Ω) R Shock, Specified Pulse MIL-STD-202 Method 213, Condition 1 ± (0.2% Ω) R Vibration, High Frequency MIL-STD-202, Method 204, Condition D ± (0.2% Ω) R Load Life 2000 hours at rated power, + 2 C, 1. hours ON, 0. hours OFF ± (1.0% Ω) R Extended Life,000 hours at rated power, + 2 C, 1. hours ON, 0. hours OFF ± (2.0% Ω) R Terminal Strength MIL-STD-202, Method 211, Condition ± (0.2% Ω) R pound (RER40, 4, 60, 6), pound (RER0,, 70, 7) Document Number Revision 18-Oct-00 For technical questions, contact ww2bresistors@vishay.com 139

3 Packaging Vishay ULK PCK MODEL DIMENSIONS in millimeters [inches] L H UNITS PER PCK MODEL DIMENSIONS in millimeters [inches] L H UNITS PER PCK G [8.88] [.12] [2.76] KK 9 KK [9.22] [.118] [1.732] H G [8.88] [.12] [2.76] KKE [7.126] [4.961] [1.299] Z [8.88] [.12] [2.76] KKE 7 KKE [9.22] [.118] [1.732] L KK [.31] [3.937] [1.378] KKE [9.370] [6.3] [1.693] KK [.236] [4.28] [1.378] KKE [.039] [4.134] [1.7] KK [9.22] [.118] [1.732] KKE 7 Si KKE 9 Si [9.22] [.079] [2.362] TPE DIMENSIONS TPE DIMENSIONS in millimeters [inches] K M T L max G 3 3 ± 1 ± 0. L max ± 0. [2.087 ± 0.039] [0.197 ± 0.020] L max + [0.0] [0.047] [0.236 ± 0.020] G ± 1 ± 0. L max ± 0. [1.417 ± 0.039] [0.197 ± 0.020] L max + [0.0] [0.047] [0.236 ± 0.020] T L max see data sheets K M T G ± 1 ± 0. L max ± 0. [2.874 ± 0.039] [0.197 ± 0.020] L max + [0.0] [0.047] [0.236 ± 0.020] G ± 1 ± 0. L max ± 0. [3. ± 0.039] [0.394 ± 0.020] L max + [0.0] [0.047] [0.236 ± 0.020] Taping corresponds to IEC G ± 1 ± 0. L max ± 0. [3.268 ± 0.039] [0.394 ± 0.020] L max + [0.0] [0.047] [0.236 ± 0.020] G ± 1 ± 0. L max ± 0. [3.46 ± 0.039] [0.394 ± 0.020] L max + 0.0] [0.047] [0.236 ± 0.020] MMOPCK H L MODEL TPE DIMENSIONS mm 1) UNITS PER L H PCK G [12.76] [3.228] [1.929] G 202 G 204 Z 301 G [12.76 [3.976] [1.929] G [12.76] [4.37] [2.93] G [12.76] [3.228] [1.929] MODEL TPE DIMENSIONS mm 1) UNITS PER L H PCK Z 303 G [12.76] [4.37] [3.43] Z 30 Z 306 CW G [12.76] [4.37] [2.93] G [12.76] [4.37] [2.93] G [12.76] [4.37] [2.93] ZD 0411 G [12.76] [3.976] [2.20] Z 302 G [12.76] [3.228] [1.929] G [12.76] [4.37] [2.93] 1) In millimeters [inches] Document Number 229 Revision 06-Sep-0 For technical questions, contact ww1resistors@vishay.com 19

4 Packaging Vishay MMOPCK (CONT D...) H MODEL DIMENSIONS mm 1) L H UNITS PER PCK ZDV [12.76] [2.087] [.787] Ordering term of model ZD0411 changes to ZDV 0411 when radial taped. L 1) In millimeters [inches] REEL PCK MODEL TPE REEL DIMENSIONS in millimeters [inches] PCKGING d C UNIT (pcs) C d R 3* G 202 [0.787] [9.843] [2.93] [3.42] R 73* [0.787] [9.843] [3.74] [4.213] G 204 R [0.787] [9.843] [3.74] [4.213] Z 301 R [0.787] [9.843] [2.93] [3.42] ZD 0411 R [0.787] [9.843] [3.74] [4.213] R 3* Z 302 [0.787] [9.843] [2.93] [3.42] R [0.787] [9.843] [3.74] [4.213] R 3* Z 303 [0.787] [9.843] [2.93] [3.42] R [0.787] [9.843] [2.93] [3.42] Z 30 R [0.787] [9.843] [2.93] [3.42] Z 306 R [0.787] [9.843] [2.93] [3.42] KK 4 R [1.043] [12.992] [3.740] [3.976] KK R [1.043] [12.992] [3.740] [3.976] R [0.1] [11.024] [2.874] [3.42] R [0.1] [7.480] [2.874] [3.189] CW-2-13 R [0.1] [7.480] [3.346] [3.661] R R 80 [0.1] [11.024] [3.976] [4.28] [0.1] [7.480] [3.976] [4.22] *Dimension in tape dimensions is ± 0.mm [0.394 ± 0.020] 160 For technical questions, contact ww1resistors@vishay.com Document Number 229 Revision 06-Sep-0

5 Packaging Vishay Draloric VISHY DRLORIC PCKGING CODE mmo Pack NOTE: This packaging code is valid only for VISHY DRLORIC resistors. 1 st digit (Package Style) R L P Reel Loose pack Embossed tape (blister) Paper tape M ulk case (Murata) X Sample EXMPLE: 2 mmopack 2000 pcs P0 Papertape,000 pcs 2 nd digit (Quantity) 0 20 C 00 D 0 E 200 F 2 G 40 H 60 I J 200 K 300 L 400 M 120 N 20,000 O P 0 Q R 000 (R26) S 700 T 30,000 U 2,000 V W X Without quantity Y Z 0, ,000 Document Number 229 Revision 06-Sep-0 For technical questions, contact ww1resistors@vishay.com 161

Wirewound Leaded Resistor Packaging Vishay LCER PCK WIREWOUND LCER PCKGING Dimensions in mm [inches] MODEL RS-1/4, RS-1/2, G-1, G-2, CW-1/2, EGS-1, EGS-2, 21.90 9.2 RS-1, RS-1, G-3, [8.00] [3.

6 Wirewound Leaded Resistor Packaging Vishay LCER PCK WIREWOUND LCER PCKGING Dimensions in mm [inches] MODEL RS-1/4, RS-1/2, G-1, G-2, CW-1/2, EGS-1, EGS-2, RS-1, RS-1, G-3, [8.00] [3.70] CW-1, CW-1M, EGS-3, NS-1, LVR-1 RS-2, RS-2M, CW CW-2M, G-, ESS-2, [8.00] [4.000] LVR-3, RS-2, RS-2C, CW-2C, G-C Resistor body is placed in slot, held in place with tongue insert. Terminals protected within folder. 20 units per folder. RS-, RS-7, CW-, ESS-, CW-7, G-, EGS-, [11.000] [.000] LVR- RS-, CW-, ESS-, LVR- [14.813] [6.063] CRD PCK WIREWOUND CRD PCKGING MODEL QTY./PCK TER OFF QTY. RH-, NH-, ERH-, 40 ENH- RH-, NH-, ERH-, 40 ENH- RH-2, NH-2, ERH-2, 20 ENH-2 RH-0, NH-0, ERH-0, 20 ENH-0 Resistor placed in slot and held in place with foldover protective paper. Each pack perforated to tear off into four smaller sub packs ULK PCK D E Intermediate ox F Unit ox xial units are uniformly packaged 0 per box with units per immediate container. Standard packaging for quantities of 300 and fewer. C WIREWOUND ULK PCKGING Dimensions in mm [inches] MODEL C D E F RS-1/8, RS-1/4, RS-1/2, RS-1M, CW-1/2, G-1, G-2, EGW-1, EGS-2, EGW-2 [1.000] [1.000] [3.62] [2.20] [3.70] [.37] RS-1, RS-1, CW-1, EGW [1.00] [1.00] [3.62] [.000] [3.87] [7.70] RS-2, RS-2, CW-2, G-, ESS [3.000] [2.20] [4.12] [6.000] [7.20] [12.000] RS-2, RS-2M, CW-2, G-, ESS-2, LVR [2.000] [2.000] [3.87] [6.000] [7.20] [12.000] RS-2C, CW-2C, G-C [2.62] [2.00] [4.000] [6.000] [7.20] [12.000] RS-, CW-, G-, ESS-, EGW-, LVR [3.000] [3.00] [4.12] [6.000] [7.20] [12.000] RS-7, CW [3.87] [2.00] [4.62] [7.00] [7.00] [1.00] RS-, CW-, ESS [4.000] [4.000] [.20] [9.70] [12.000] [14.00] 162 For technical questions in Europe contact ww1resistors@vishay.com For technical questions in mericas/sia contact ww2aresistors@vishay.com Document Number 229 Revision 06-Sep-0

7 Wirewound Leaded Resistor Packaging Vishay MMOPCK Resistors are lead taped, the same as in Reel Pack (see page), then they are placed in a continuous S pattern (without paper inner leaf) in an appropriate box. SKIN PCK versatile packaging method. Units are placed on double-faced corrugated board, then skin packed to board with polyfilm. Most resistor types are in multiples of five with insert strips. MILITRY ND SPECIL PCKGING Military packaging per MIL-P-116, Method 18. lister pack, foam pack and vial pack also available for special requirements. REEL PCK Vishay Dale Standard Packaging Technique WIREWOUND REEL PCKGING dimensions in mm [inches] MODEL MXIMUM UNITS PER REEL PITCH TPE SMLL LRGE SPCING FLNGE FLNGE (Note 1) (Note 2) 7.00 [190.0] ] Note to 0.62 [14.29 to 1.88] Hole RS-1/4, RS-1/2, G-1, G-2, CW-1/2, EGS-1, EGS-2 [0.200] [2.063] RS-1, RS-1, G-3, CW-1, CW-1M, EGS-3 [0.200] [2.063] NS-1, LVR [0.200] [2.063] C-1, C-2, (Note 3) [0.200] [2.87] RS-2, RS-2M, CW-2, CW-2M, G-, ESS-2 [0.400] [2.00] LVR [0.400] [2.00] RS-2, RS-2C, CW-2C, G-C [0.400] [2.00] RS-, RS-7, CW-, ESS-, CW-7, G-, EGS- [0.400] [2.87] LVR [0.400] [2.87] RS-, CW-, ESS [0.400] [3.37] NOTES: 1) Leads will be trimmed to a maximum of 0.063"mm [1.9mm] beyond tape edge. 2) For non standard type and reel requirements, contact our engineering department, see address at the bottom of this page. 3) C-1 and C-2 will be taped at pitch, 2.87" mm [73.02mm] tape space without lead trim. C 4000 and C-000 series will be taped at pitch, tape space varies by body length. Document Number 229 Revision 06-Sep-0 For technical questions in Europe contact ww1resistors@vishay.com For technical questions in mericas/sia contact ww2aresistors@vishay.com 163

8 Military Product Identification Vishay Dale MILITRY PRT ORDERING EXMPLES To help in ordering, the following are examples of military part numbers cross-referenced to Vishay Dale part numbers. For complete information on military part numbering, consult the specific military specification. WIREWOUND RESISTORS: MIL-PRF-26 (asic [RW]) (Established Reliability alternate MIL-PRF [RWR]) RW Type Vishay Dale Type RW80 U 49R9 F G Ω 1% RW67 V 1 RS--70 0Ω % MIL-PRF-1846 (asic [RE]) (Established Reliability alternate MIL-PRF [RER]) RE Type Vishay Dale Type RE6 G 01 RH- 1kΩ 1% MIL-PRF (Established Reliability [RWR]) (asic is MIL-PRF-26 [RW]) RWR Type Vishay Dale Type RWR74 S R1 F R ESS-.1Ω 1% R MIL-PRF (Established Reliability [RER]) (asic is MIL-PRF-1849 [RE]) RER Type Vishay Dale Type RER6 F 01 R ERH- 1kΩ 1% R MIL-PRF-4946 (asic [RLV]) (Established Reliability-None) RLV Type Vishay Dale Type M T R00 F LVR Ω 1% Characteristic 3. Resistance Value* 4. Tolerance 2 Characteristic 3. Resistance Value* 4. Tolerance 2. Characteristic 3. Resistance Value* 4. Tolerance. Failure Rate Level 2. Resistance Value 3. Tolerance 4. Failure Rate Level 2. Specification Sheet Number 3. Characteristic 4. Resistance Value*. Tolerance *See the following page for Military decade resistance table. 130 For technical questions, contact ww2bresistors@vishay.com Document Number Revision 28-Mar-02

9 Military Product Identification Vishay Dale STNDRD RESISTNCE VLUES FOR THE TO 0 DECDE * () 0.1 (F) 1.0 * () 0.1 (F) 1.0 * () 0.1 (F) 1.0 * () 0.1 (F) 1.0 (D) 0. (D) 0. (D) 0. (D) * Listing of resistance values for the and D tolerance does not guarantee that all of these resistance values are available for all resistor models. Document Number Revision 28-Mar-02 For technical questions, contact ww2bresistors@vishay.com 131

military wirewound resistors r e s i s t i v e p r o d u c t s Key enefits Vishay Military Wirewound Resistors deliver: wide range of power ratings (1 watt to 120 watt) wide resistance range (0.

10 military wirewound resistors r e s i s t i v e p r o d u c t s Key enefits Vishay Military Wirewound Resistors deliver: wide range of power ratings (1 watt to 120 watt) wide resistance range (0.01 Ω to 71. KΩ) Low/high temperature performance ( 6 ºC to + 30 ºC) Tight tolerances (down to ± 0.1 %) Low temperature coefficient (down to ± 20 ppm/ºc) Excellent overload capability Non-inductive, chassis mounted and weldable terminal styles available S e l e c t o r G u i d e w w w. v i s h a y. c o m For technical questions, contact ww2bresistors.vishay.com

11 r e s i s t i v e p r o d u c t s S e l e c t o r G u i d e Military Specification Model Non-Established Reliability Products MIL-PRF-26 RW70U RW81U RW80U RW79U RW69V RW74U RW67V RW78U RW68V MIL-PRF-4946 RLV (sheet 01) RLV30 (sheet 06) RLV31 (sheet 07) MIL-PRF-1846 RE60G RE60N RE6G RE6N RE70G RE70N RE7G RE7N RE77G RE77N RE80G RE80N Established Reliability Products MIL-PRF RWR81S / RWR81W RWR81N / RWR81Z RWR82S / RWR82W RWR82N / RWR82Z RWR80S / RWR80W RWR80N / RWR80Z RWR71S / RWR71W RWR71N / RWR71Z RWR89S / RWR89W RWR89N / RWR89Z RWR74S / RWR74W RWR74N / RWR74Z RWR84S / RWR84W RWR84N / RWR84Z RWR78S / RWR78W RWR78N / RWR78Z MIL-PRF RER40 RER4 RER0 RER RER60 RER6 RER70 RER7 One of the World s Largest Military Wirewound Resistors Part Number Definition RW80 U 49R9 F RW67 V Characteristic (derating curve) U = 20 ºC V = 30 ºC 3. Resistance value 4. Tolerance M T R00 F Specification sheet number 3. Characteristic (always T) 4. Resistance value. Tolerance RE6 G Characteristic winding type G = Standard N = Non-inductive 3. Resistance value Note: tolerance is 1 % RWR74 S R1 F R Characteristic winding type and terminal type S = Standard wind, solderable W = Standard wind, weldable N = Non-inductive wind, solderable Z = Non-inductive wind, weldable 3. Resistance value 4. Tolerance. Failure rate level RER6 F 01 R Tolerance 3. Resistance value 4. Failure rate level Manufacturers of Discrete Semiconductors and Passive Components Wattage Rating Resistance Range 0.1 Ω 2.74 KΩ 0.1 Ω 1 KΩ 0.1 Ω 2.74 KΩ 0.1 Ω 6.49 KΩ 0.1 Ω 2.0 KΩ 0.1 Ω 24.3 KΩ 0.1 Ω 8.2 KΩ 0.1 Ω 71. KΩ 0.1 Ω 20 KΩ 0.01 Ω 0. Ω 0.01 Ω 0.2 Ω 0.01 Ω 0.3 Ω 0.1 Ω 3.32 KΩ 1.0 Ω 1.6 KΩ 0.1 Ω.62 KΩ 1.0 Ω 2.8 KΩ 0.1 Ω 12.1 KΩ 1.0 Ω 6.04 KΩ 0.1 Ω 39.2 KΩ 1.0 Ω 19.6 KΩ 0.0 Ω 29.4 KΩ 1.0 Ω 14.7 KΩ 0. Ω 3.7 KΩ 1.0 Ω 17.4 KΩ 0.1 Ω 1 KΩ 0.1 Ω 499 Ω 0.1 Ω 1.3 KΩ 0.1 Ω 649 Ω 0.1 Ω 3.16 KΩ 0.1 Ω 1.8 KΩ 0.1 Ω 12.1 KΩ 0.1 Ω 6.04 KΩ 0.1 Ω 4.12 KΩ 0.1 Ω 2.0 KΩ 0.1 Ω 12.1 KΩ 0.1 Ω 6.04 KΩ 0.1 Ω 12.4 KΩ 0.1 Ω 6.19 KΩ 0.1 Ω 39.2 KΩ 0.1 Ω 19.6 KΩ 1.0 Ω 1.6 KΩ 1.0 Ω 2.8 KΩ 1.0 Ω 6.04 KΩ 1.0 Ω 4.99 KΩ 0. Ω 3.32 KΩ 0. Ω.62 KΩ 0. Ω 12.1 KΩ 0. Ω 39.2 KΩ Tolerance ± 0. %, ± 1 %* ± 0. %, ± 1 %* ± 0. %, ± 1 %* ± 0. %, ± 1 %* ± %, ± % ± 0. %, ± 1 %* ± %, ± % ± 0. %, ± 1 %* ± %, ± % *± 0.1 % available on limited range ± 1 % ± 1 %, ± % ± 1 %, ± % ± 1 % ± 0. %, ± 1 % ± 1 % NOTICE Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay s terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. w w w. v i s h a y. c o m VMN-SG08-06

Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount

Wirewound Resistors, Military, MIL-PRF-18546 Qualified, Type RE, Aluminum Housed, Chassis Mount STANDARD ELECTRICAL SPECIFICATIONS MILITARY VISHAY REFERENCE POWER RATING P 25 C W FEATURES Molded construction