WIRE PERFORMANCE SPECIFICATION FOR AIRCRAFT ELECTRICAL SYSTEMS
|
|
|
- Wilfred Fields
- 6 years ago
- Views:
Transcription
1 Indianapolis WIRE PERFORMANCE SPECIFICATION FOR AIRCRAFT ELECTRICAL SYSTEMS 6 November 2002 Joe Kurek Nick Kirincich Multi-disciplined Engineer Section Manager, Wiring Design (317) (317) kurekj@indy.raytheon.com kirincichn@indy.raytheon.com This work is being performed under contract to the FAA Technical Center (Contract No. GS-23F-0263K)
2 Goal Develop the performance requirements for electrical interconnect wire necessary to assist the FAA to update to current standards the regulations related to insulated electrical wire used in commercial aircraft. WHY? To improve safety of aircraft by creating up-to-date requirements for electrical wire used in aircraft.
3 Wire Issues Topcoat flaking Chaffed wire
4 Wire Issues Notch propagation at hot stamp Notch propagation (not to conductor)
5 Wire Issues Arcing Damage / Flammability
6 Background Indianapolis facility Formerly part of NAVAIR Performed the qualification of wiring components to military specifications Technical lead for wiring standards The center of excellence for wiring in NAVAIR Raytheon Technical Services Co., Engineering and Production Support (RTSC EPS) Privatized in 1997 (BRAC) Contracted to NAVAIR for wiring support Continued to provide qualification and standardization support Other wiring contracts with AF, FAA, NTSB, OEMs, etc. Wiring design, installation, repair, modifications, etc. Wiring and wiring component test facilities
7 Tasks Identify the current requirements for electrical wire in aerospace applications Collect Field Data Evaluate the data Identify deficiencies in the wiring requirements related to incidents and accidents Review current wire specifications for inadequacies Develop the requirements for a performance based specification for electrical wiring in commercial aircraft
8 Task 1: Current Wire Specifications Identify all current wire performance and component specifications for general-purpose aircraft wire Collect current wire specifications Major Original Aircraft Manufacturers (OAMs) Military Specifications (Mil-Spec, Def-Stan) Wire Manufacturer s Specifications Industry Standard s Bodies (SAE, NEMA, UL, ASTM, AECMA) Governing Bodies
9 Task 2: Collect Field Data Collect field data related to electrical wiring Incident and accident data (NTSB AAIDS and ASRS) Maintenance and inspection data (ATSRAC data) Airworthiness Directives (AD) Service difficulty reports (SDR) Other related sources (Navy Safety Info, NALDA Cable & Connector/Electric Shop) Field data collected utilizing key word searches on public available data. Wire, wiring, short, arc, smoke, cable, and derivatives Identify field data potentially related to wire deficiencies.
10 Task 3: Evaluation of Data (cont.) Analyze the field data Identify data which may indicate wire deficiencies. Categorize the causes of failure. Filter data. Wire Deficiency Design Deficiency Maintenance Installation Modifications Use / Misuse Source Non Wire Related Non Wire Related Not Enough Data Very little specific data to perform good analysis.
11 Task 3: Evaluation of Data (cont.) Analyze the wire specifications Review and analyze the requirements of electrical wire Determine the adequacy of the specifications Identify areas where the specifications may lack sufficient requirements. Some examples that have been identified include: Arc track resistance Smoke Toxicity Mechanical strength at temperature Identify areas where the specifications are not pertinent Purchasing data
12 Task 4: Develop Wire Performance Specification Requirements Draft a Performance Specification for general purpose aircraft electrical wire Minimum requirements for electrical wire used on aircraft Not to be a design guide and not to tell designer how to do his job Recommendations to the FAA Technical Center Possible inclusion in a technical standards order (TSO) Status: About to begin this phase
WIRE & CABLE. 99 Wire Low fire hazard wire and cable
Applications 99 wire has a dual wall construction of radiation cross-linked modified polyester. This combines excellent mechanical performance and chemical resistance with a range of enhanced fire hazard
Wire and Cable. 55 Wire Single or Dual Wall 200ºC rated, XLETFE High performance wire and cable. Features & Benefits
55 wire is insulated with modified radiation crosslinked ETFE polymer and combines the easy handling of a flexible thin wall wire, with excellent scrape abrasion and cut-through characteristics. The single
Wire and Cable. 99 Wire Dual Wall 120ºC rated, Modified Polyester Low fire hazard wire and cable. Features & Benefits
Dual Wall 20ºC rated, Modified Polyester 99 wire has a dual wall construction of radiation crosslinked modified polyester. This combines excellent mechanical performance and chemical resistance with a
SPEC 44. Wire and cable
SPEC 44 Wire and cable Applications SPEC 44 wire has a dual wall construction which combines the outstanding physical and electrical characteristics of radiation crosslinked polyalkene with the excellent
High Performance Wire and Cable
SPEC 55 Product Facts Resistant to electrical arc tracking in wet or dry conditions Single or dual wall constructions Small size, ultra light weight Exceptional chemical resistance -65 C to 200 C [-85
Spec wire. Performance Wire and Cable
Spec 44.55.99wire Performance Wire and Cable 44 Wire Dual Wall 150ºC rated, XL-PVDF SPEC 44 wire has a dual wall construction which combines the outstanding physical and electrical characteristics of radiation
SPEC 55 Wire and Cable High-performance wire and cable insulation system for 65 C to 200 C
SPEC 55 Wire and Cable High-performance wire and cable insulation system for 65 C to 200 C Applications Hookup and signal wire and cable used in aircraft, avionics, military electronics, satellites, helicopters,
WIRE & CABLE. 55 Wire High performance wire and cable
Applications 55 wire is insulated with modified radiation cross-linked ETFE polymer and combines the easy handling of a flexible wire, with excellent scrape abrasion and cut-through characteristics. The
High Performance Wire and Cable SPEC 55. Product Facts. by hot stamp, ink jet or laser, and can be potted without pre-etching.
SPEC 55 9-10 Product Facts Resistant to electrical arc tracking in wet or dry conditions Single or dual wall constructions Small size, ultra light weight Exceptional chemical resistance -65 C to 200 C
SECTION CABLE TRAYS
SECTION 16139 CABLE TRAYS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
EXTRUDED, CROSS-LINKED FLUOROPOLYMER INSULATED WIRES AND CABLES ON SILVER-PLATED COPPER CONDUCTOR, LOW FREQUENCY, 600V, -100 TO +200 C
Page 1 of 24 ETRUDED, CROSS-LINKED FLUOROPOLYMER INSULATED WIRES AND CABLES ON SILVER-PLATED COPPER CONDUCTOR, LOW FREQUENCY, 600V, -100 TO +200 C ESCC Detail Specification Issue 4 March 2013 Document
Updates to AC B Composite Aircraft Structure
Updates to AC 20-107B Composite Aircraft Structure Presented to: Composite Damage Tolerance & Maintenance Workshop (Tokyo) By: Date: Larry Ilcewicz & Lester Cheng (FAA) Simon Waite (EASA) June 5, 2009
ST0057 Date: 9 Sept The Ultraviolet (UV) Laser Marking Performance of Common Aerospace Wire and Cable Constructions
ST0057 Date: 9 Sept. 2008 The Ultraviolet (UV) Laser Marking Performance of Common Aerospace Wire and Cable Constructions This is an abbreviated report to obtain a copy of the full report including all
SECTION PANELBOARDS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 24 16 PANELBOARDS SPEC WRITER NOTE: Delete between // --- // if not applicable to project. Also, delete any other item or paragraph not applicable in the section
SECTION OVERCURRENT PROTECTIVE DEVICE COORDINATION STUDY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 05 73 OVERCURRENT PROTECTIVE DEVICE COORDINATION STUDY SPEC WRITER NOTE: Delete between // -- // if not applicable to project. Also, delete any other item or
Glenair s Series 80 ASAP Cordsets for High-Speed Ethernet, USB and Firewire Applications
General Information Compact Weight-Saving Design with size #23 Contacts SB 2.0, 100BASE-T, 1000BASE-T, IEEE 1394 Environmentally Protected, Robust Construction Aerospace-Grade Cable Meets FAA FAR 25 Flammability
International Organization for Standardization. American National Standards Institute
DFTG1329 Standards are published documents that set up rules, specifications and protocols designed to ensure consistency, compatibility and reliability of products, materials and services. Standards are
Chapter 4: Laboratory Testing
Chapter 4: Laboratory Testing Experimental Description The working group selected 25 candidate laboratory tests to apply to aircraft wire specimens (see Appendix 1.2.7). These candidate tests were to be
Pulse Arrested Spark Discharge (PASD) Wiring Diagnostic**
8 th Joint FAA/DoD/NASA Conference on Aging Aircraft February, 5 Pulse Arrested Spark Discharge (PASD) Wiring Diagnostic** Larry X Schneider *, M. Dinallo, R. K. Howard, S. F. Glover, G. E. Pena **, T.
DEPARTMENT OF TRANSPORTATION
DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [61 FR 625 No. 6; 01/09/96][SN] [Docket No. 94-ANE-63; Amendment 39-9458; AD 95-03-10] Textron Lycoming AD 95-03-10 Amendment
Arc Flash Analysis and Documentation SOP
Arc Flash Analysis and Documentation SOP I. Purpose.... 2 II. Roles & Responsibilities.... 2 A. Facilities Maintenance (FM).... 2 B. Zone Supervisors/ Shop Foremen... 2 C. PMCS & CPC... 2 III. Procedures...
SECTION 3. BOLTS. bolt is a standard AN-type or a special-purpose bolt, and sometimes include the manufacturer.
9/8/98 AC 43.13-1B SECTION 3. BOLTS 7-34. GENERAL. Hardware is the term used to describe the various types of fasteners and small items used to assemble and repair aircraft structures and components. Only
Technical Standard Order
Department of Transportation Federal Aviation Administration Aircraft Certification Service Washington, DC TSO-C126 Date: 12/23/92 Technical Standard Order Subject: TSO-C126, 406 MHz EMERGENCY LOCATOR
FLUOROPOLYMER COATED DUCT FOR CAUSTIC ENVIRONMENTS
DIVISION 23 FLUOROPOLYMER COATED DUCT FOR CAUSTIC ENVIRONMENTS Part I General 1.1 Related Documents A. All terms and general provisions of contract, General and Supplementary Conditions, and Specification
SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, TWELVE INDIVIDUALLY SHIELDED PAIRS 22 (7 X 30) AWG
INCH-POUND MIL-DTL-49285/22B 27 March 2018 SUPERSEDING MIL DTL 49285/22A 1 March 2010 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, TWELVE INDIVIDUALLY SHIELDED PAIRS 22 (7 X 30) AWG Inactive
AP 100 AUDIO PANEL. Installation and Operator s Manual
VAL AVIONICS LTD AP 100 AUDIO PANEL Audio Management System Installation and Operator s Manual Revision 1 January 2007 P/N 1720100-1 Table of Contents Pg 1 SECTION I - GENERAL INFORMATION... 1 1.1 INTRODUCTION...
Service Bulletin. Fuel Systems. Bulletin No.: PRS-103. Date: 05/12/98. SUBJECT: RSA-10 Fuel Diaphragm Assembly, Part Number
3220 100TH ST. SW BLDG E EVERETT, WASHINGTON 98204 FAA-PMA FACILITY #PQ111NM Service Bulletin Fuel Systems Bulletin No.: PRS-103 SUBJECT: RSA-10 Fuel Diaphragm Assembly, Part Number 2541803. A. EFFECTIVITY:
Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers
Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids Relays and
POLYIMIDE INSULATED WIRES AND CABLES, LOW FREQUENCY, 600V, -200 TO +200 C BASED ON TYPE SPL. ESCC Detail Specification No.
Page 1 of 23 POLYIMIDE INSULATED WIRES AND CABLES, LOW FREQUENCY, 600V, -200 TO +200 C BASED ON TYPE SPL ESCC Detail Specification Issue 3 May 2013 Document Custodian: European Space Agency see https://escies.org
TYGADURE FOR EXTREME APPLICATIONS
TYGADURE FOR EXTREME APPLICATIONS CONTENTS ABOUT US 2 TYGADURE 3 PTFE (Polytetrafluoroethylene) 4 FEP (Flourinated Ethylene Propylene) 5 SILICONE RUBBER 6 TYGASIL CLASS H 7 ETFE (Ethylene Tetraflouroethylene)
A/E REVIEW CHECKLIST HVAC
A/E CHECKLIST HVAC Reviewers should - Use Checklists when reviewing any type of VA construction project for the following disciplines: Site and Landscape, Architectural, Structural, Plumbing, Fire Protection,
Title: Malcom Heat Gun Test HQ AFMC ABDR-TSO#:
Title: Malcom Heat Gun Test HQ AFMC ABDR-TSO#: 000411006 AUTHOR James M. Huff (Science Applications International Corporation) HQ Air Force Materiel Command ABDR Technical Support Office (ABDR TSO) Building
SECTION WIREWAYS FOR RADIOLOGY EQUIPMENT
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 05 36 WIREWAYS FOR RADIOLOGY EQUIPMENT SPEC WRITER NOTE: Delete between //----// if not applicable to project. Also, delete any other item or paragraph not applicable
FEDERAL SPECIFICATION WIRE, ELECTRICAL, COPPER (UNINSULATED)
8 April 99 SUPERSEDING QQ-W-343F 9 November 990 FEDERAL SPECIFICATION WIRE, ELECTRICAL, COPPER (UNINSULATED) This specification was approved by the Commissioner, Federal Supply Service, General Services
UFGS-16553N (Septermber 1999) UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-26 55 80.00 20 (April 2006) -------------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-16553N (Septermber 1999) UNIFIED FACILITIES GUIDE
ADDENDUM NO. 2 PROJECT: COURTLAND PUMP STATION CONTRACT: IFB NO COM.00030
ADDENDUM NO. 2 PROJECT: COURTLAND PUMP STATION CONTRACT: IFB NO. 2018-008-COM.00030 To: Prospective Bidders of Record Date: December 17, 2018 The following changes, additions, revisions, and/or deletions
MODEL E-04C 121.5/406 MHz ELT GPS CAPABLE ELT ACCEPTS ARINC 429, GARMIN AVIATION, BENDIX/KING AVIATION AND NMEA 0183 DATA
MODEL E-04C 121.5/406 MHz ELT GPS CAPABLE ELT ACCEPTS ARINC 429, GARMIN AVIATION, BENDIX/KING AVIATION AND NMEA 0183 DATA THE ONLY ELT CERTIFIED TO THE NEW TSO-C126b STANDARD BATTERY CERTIFIED TO TSO-C142a
Using MIL-STD-882 as a WHS Compliance Tool for Acquisition
Using MIL-STD-882 as a WHS Compliance Tool for Acquisition Or what is This Due Diligence thing anyway? Matthew Squair Jacobs Australia 28-29 May 2015 1 ASSC 2015: Brisbane 28-29 May 2015 Or what is This
INFRARED REFLECTANCE INSPECTION
Infrared Reflectance Imaging for Corrosion Inspection Through Organic Coatings (WP-0407) Mr. Jack Benfer Principal Investigator NAVAIR Jacksonville, FL Tel: (904) 542-4516, x153 Email: john.benfer@navy.mil
Hidden fire program :Evaluation of materials located in inaccessible areas with the radiant panel
Hidden fire program :Evaluation of materials located in inaccessible areas with the radiant panel Abstract Anne Mansuet Centre d'essais Aéronautique de Toulouse 47, rue Saint Jean BP 53123 31131 BALMA
Engine Component CBM using Flexible ET Arrays for Crack Depth Measurement
Propulsion Safety and Affordable Readiness (PSAR) Conference 2015 Baltimore, MD; March 30 - April 2, 2015 Engine Component CBM using Flexible ET Arrays for Crack Depth Measurement 31 March 2015 Neil Goldfine,
Design Change Control for PMA Holders
Design Change Control for PMA Holders Presented by: Darren Lovato President/FAA DER DER TECHNOLOGIES, INC. March 20-22, 2017 Gorham - PMA Parts & DER Repairs Conference - 2017 Overview Focus on T & C,
For the Malaysia Engineering Accreditation Council (EAC), the programme outcomes for the Master of Engineering (MEng) in Civil Engineering are:
Programme Outcomes The Civil Engineering department at the University of Nottingham, Malaysia considers and integrates the programme outcomes (POs) from both the Malaysia Engineering Accreditation Council
DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
INCH-POUND AN924 Rev 13 14 April 2014 SUPERSEDING AN924 Rev 12 w/amendment 1 23 January 2013 DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING Reinstated after 14 June 2012. Inactive
Airport Cables & Connectors
Airport Cables & Connectors Aircraft Cable & Connector Products Descrip on 0 Hz Single Jacket No Contact Sec on 0 Hz Single Jacket With Replaceable Durable Hard Nose Contact Sec on 0 Hz Single Jacket -
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-27 05 28.36 40 (May 2017) --------------------------------- Preparing Activity: NASA Superseding UFGS-27 05 28.36 40 (August 2014) UNIFIED FACILITIES GUIDE SPECIFICATIONS
Technical Standard Order
Department of Transportation Federal Aviation Administration Aircraft Certification Service Washington, D.C. TSO-C23f Effective Date: 09/21/2012 Technical Standard Order Subject: Personnel Parachute Assemblies
National Certificate: Electrical Engineering: Construction (NQF 2)
National Certificate: Electrical Engineering: Construction (NQF 2) COURSE TITLE SAQA ID NQF CREDITS ETQA National Certificate: Electrical Engineering (Construction) 733313 Level 2 141 1 / 8 CETA Type of
Evaluation of Barkhausen Noise During Overhaul
Evaluation of Barkhausen Noise During Overhaul David Piotrowski Senior Principal Engineer ASNT Level III UT, ET, PT Alex Melton NDT Programs John Bohler Level III ET NDT Programs Greg Kanniard, Rick Caputo
ELECTRICAL EQUIPMENT. Inspection. H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E
ELECTRICAL EQUIPMENT Inspection H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: The course begins with the fundamental principles that always
SPECIAL PROVISION Description of Project, Scope of Contract and Sequence of Work
2004 Specifications CSJ 0110-04-166 SPECIAL PROVISION 000--363 Description of Project, Scope of Contract and Sequence of Work 1. General. The work to be performed on this project consists of furnishing,
Regulatory Perspective on the Use of Metal Additive Manufacturing for Aerospace
Regulatory Perspective on the Use of Metal Additive Manufacturing for Aerospace Presented at: SME Smart Manufacturing Series: Quality Processes & Regulatory Considerations for Metal AM October 23, 2018
DETAIL SPECIFICATION SHEET CABLES, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 75 OHMS, LOW NOISE, LOW SMOKE, ENHANCED INSULATION RESISTANCE
INCH-POUND MIL-DTL-17/234 28 May 2016 DETAIL SPECIFICATION SHEET CABLES, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 75 OHMS, LOW NOISE, LOW SMOKE, ENHANCED INSULATION RESISTANCE This specification is approved
This section applies to the requirements for the performance of power system studies by both the Design Engineer and the Contractor.
Basis of Design This section applies to the requirements for the performance of power system studies by both the Design Engineer and the Contractor. Background Information A Short Circuit and Coordination
1625 North 1100 West SB Springville, UT SERVICE BULLETIN MANDATORY ACTION REQUIRED
SERVICE BULLETIN MANDATORY ACTION REQUIRED Subject: Chafing of Aileron Cable Assembly P/N 7227151-522WE. 1. Planning a. Effectivity Part Number NHA P/N NHA Description ATA Aircraft Application 7227151-522WE
C I R R U S EMERGENCY DESCRIPTION A. Emergency Locator Transmitter (ELT)
EMERGENCY 1. DESCRIPTION A. Emergency Locator Transmitter (ELT) This airplane is equipped with a self-contained ELT. The ELT transmitter is installed immediately behind the aft cabin bulkhead. The ELT
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/32D 03 October 2017 SUPERSEDING MIL-PRF-83536/32C 21 April 2015 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 3PDT, 25 AMPERES (RESISTIVE),
MAY 14 Rev B
Product Specification 108-2443 29 MAY 14 Rev B Modular, High Density, RF Connection System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity
Low Voltage AIRGUARD. A proven, rugged product for harsh environments
Low Voltage AIRGUARD A proven, rugged product for harsh environments Linking the future As the worldwide leader in the cable industry, Prysmian Group believes in the effective, efficient and sustainable
2018 Aerospace Career Expo. Hosted by the Aeronautical and Astronautical Engineering Student Advisory Council (AAESAC)
2018 Aerospace Career Expo Hosted by the Aeronautical and Astronautical Engineering Student Advisory Council (AAESAC) 1 Background What is going on? We are pleased to inform you that the AAESAC will be
UNIFIED FACILITIES GUIDE SPECIFICATIONS *************************************************************************** SECTION
USACE / NAVFAC / AFCEC / NASA UFGS-01 33 00.05 20 (May 2014) Change 1-09/15 Change 2-12/15 Change 3-09/16 ----------------------------------- Preparing Activity: NAVFAC Superseding UFGS-01 33 00.05 20
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24558/18B 3 October 2011 SUPERSEDING MIL-DTL-24558/18A w/amendment 1 17 February 2006 DETAIL SPECIFICATION SHEET TERMINAL BOXES, CONNECTION, SUBMERSIBLE (15-FOOT), 600 VOLTS, 4-TERMINAL,
INSTALLATION & OPERATING INSTRUCTIONS
INSTALLATION & OPERATING INSTRUCTIONS IM-360 Model 4238 GaAs Switched Programmable Attenuators This documentation may not be reproduced in any form, for any purpose unless authorized in writing by API
Research Program Overview Maintenance & Inspection (M&I) Technical Community Representative Group (TCRG) Part of BLI A11e Continued Airworthiness
Research Program Overview Maintenance & Inspection (M&I) Technical Community Representative Group (TCRG) Part of BLI A11e Continued Airworthiness Presented to: 57 th Annual A4A NDT Forum By: David Westlund
MIL-DTL-5421C 13 July 2007 SUPERSEDING MIL-T-5421B 20 May 1969 DETAIL SPECIFICATION TUBES, PITOT, ELECTRICALLY HEATED, AIRCRAFT
INCH-POUND 13 July 2007 SUPERSEDING MIL-T-5421B 20 May 1969 DETAIL SPECIFICATION TUBES, PITOT, ELECTRICALLY HEATED, AIRCRAFT Inactive for new design after 5 May 1999. This specification is approved for
FAA Research and Development Efforts in SHM
FAA Research and Development Efforts in SHM P. SWINDELL and D. P. ROACH ABSTRACT SHM systems are being developed using networks of sensors for the continuous monitoring, inspection and damage detection
NUGENIA position paper. Ageing of Low Voltage Cable in Nuclear Environment. 12 February 2015
NUGENIA position paper Ageing of Low Voltage Cable in Nuclear Environment 12 February 2015 NUGENIA is an international non-profit association under Belgian law established in 2011. Dedicated to the research
Implementation of Corrosion Control Technologies within the U.S. Department of Defense
Implementation of Corrosion Control Technologies within the U.S. Department of Defense The 19th International Congress on Marine Corrosion and Fouling Melbourne, Florida Rich Hays Senior Corrosion Engineer,
DETAIL SPECIFICATION WIRE STRAND, NONFLEXIBLE, FOR AIRCRAFT APPLICATION
INCH-POUND MIL-DTL-87161F 14 January 2010 SUPERSEDING MIL-DTL-87161F 1 April 2005 DETAIL SPECIFICATION WIRE STRAND, NONFLEXIBLE, FOR AIRCRAFT APPLICATION This specification is approved for use by all Departments
July 12, Subject: DFARS Case 2012-D055 Definitions. Dear Ms. Murphy:
July 12, 2013 Defense Acquisition Regulations System Attn: Ms. Meredith Murphy OUSD (AT&L) DPAP/DARS Room 3B855 3060 Defense Pentagon Washington, DC 20301 3060 Subject: DFARS Case 2012-D055 Definitions
PS901500E IDENTIFICATION, MARKING, HANDLING, PROCESSING AND INSPECTION OF CRITICAL PARTS
SECURITY CLASS: UNCLASSIFIED COML. CLASS: UNCLASSIFIED DOCUMENT IDENTIFIER SUBJECT: IDENTIFICATION, MARKING, HANDLING, PROCESSING AND INSPECTION OF CRITICAL PARTS MATERIAL ENGINEERING & TECHNOLOGY DEVELOPMENT
SECTION ADMINISTRATIVE REQUIREMENTS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Electronic document submittal service. B. Preconstruction meeting. C. Progress meetings. D. Construction progress schedule. E. Coordination drawings. SECTION 013000
Commercial Aviation Interconnects. & Value-Added Services CAB-6.18
Commercial Aviation Interconnects & Value-Added Services CAB-6.18 AirBorn engineers design & fabricate to the highest aerospace standards imaginable so airline passengers can sit back, relax and enjoy
Reliability and Risk in Theory and Practice
Reliability and Risk in Theory and Practice Panel 1: Frontiers of Reliability Engineering University of Maryland April 2, 2014 Elias Anagnostou Engineering Fellow, Research and Technology Need For Risk-Based
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Caddsdown Industrial Estate Clovelly Road Bideford Devon EX39 3DX Contact: Becky Scott Tel: +44 (0)1237 423388 Fax: +44 (0)1237 423434 E-Mail:
SUBMITTAL PROCEDURES
SUBMITTAL PROCEDURES PART 1 GENERAL The ASPA Project Engineer (APE) may request submittals in addition to those specified when deemed necessary to adequately describe the work covered in the respective
Crimp Quality Standards Comparison and Trends
Crimp Quality Standards Comparison and Trends By Rob Boyd, Crimping Product Manager Quality standards are getting tougher each year. In these difficult times, wire harness manufacturers are looking to
AT 3000 OPERATION/INSTALLATION MANUAL ALTITUDE ENCODER. Trimble 2105 Donley Austin, Texas (512) PUBLICATION NUMBER
AT 3000 ALTITUDE ENCODER OPERATION/INSTALLATION MANUAL Trimble 2105 Donley Austin, Texas 78758 (512) 432-0400 PRINTED IN U.S.A. PUBLICATION NUMBER 1900-4099-00 AT 3000 ALTITUDE ENCODER OPERATION/INSTALLATION
SECTION MEDIUM-VOLTAGE CABLES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 05 13 MEDIUM-VOLTAGE CABLES SPEC WRITER NOTE: Delete between //-----// if not applicable to project. Also delete any other item or paragraph not applicable in
This instruction sheet covers the application and maintenance procedures for Crimping Die Assembly
Figure 1 This instruction sheet covers the application and maintenance procedures for Crimping Die Assembly 318106 1. For additional information on COPALUM terminals and splices, refer to Catalog 82020.
HE100A (P/N: ) INSTALL GUIDE VERSION 1.5 DOCUMENT#
HE100A (P/N: 300100) INSTALL GUIDE VERSION 1.5 DOCUMENT# 300104 COPYRIGHT 2018 Blue Sky Network, LLC All rights reserved. No part of this manual may be reproduced, stored or distributed without written
Emerging NDE Technology for Aging Aircraft
Emerging NDE Technology for Aging Aircraft David G. Moore Richard L. Perry Sandia National Laboratories - Federal Aviation Administration Airworthiness Assurance NDI Validation Center Albuquerque, New
Notification of a Proposal to issue an Airworthiness Directive
Notification of a Proposal to issue an Airworthiness Directive PAD No.: 18-063 Issued: 30 April 2018 Note: This Proposed Airworthiness Directive (PAD) is issued by EASA, acting in accordance with Regulation
Guidance for Fitting COTS Products to Airframes
Guidance for Fitting COTS Products to Airframes Determination for Major/Minor Alterations (FAA) 1. Who determines if an alteration to an aircraft is Major or Minor? The installer, backed by approved and
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-26 00 00.00 20 (July 2006) ------------------------------- Preparing Activity: NAVFAC Superseding UFGS-26 00 00.00 20 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
PERFORMANCE SPECIFICATION SHEET
INCH-POUND 10 August 2016 SUPERSEDING 16 November 2011 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR
Bruce L. Graves /01/$ IEEE. IEEE Industry Applications Magazine PhotoDisc, Inc.
Bruce L. Graves A Defining a Power System A power system is an assembly of generators, transformers, power lines, fuses, circuit breakers, protective devices, cables, and associated apparatus used to generate
GWX 68 Weather Radar Installed in Beech 90 Series Installation Data
GWX 68 Weather Radar Installed in Beech 90 Series Installation Data FAA STC Project No. ST9355SE-A P/N Garmin Ltd. Or its subsidiaries c/o Garmin International, Inc. 1200 E. 151st Street Olathe, Kansas
UFGS (November 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCESA / NASA UFGS-27 05 28.36 40 (August 2011) ----------------------------------- Preparing Activity: NASA Superseding UFGS-27 05 28.36 40 (November 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS
AMPOWER Terminals and Splices Catalog Revised 05-95
atalog 805 Product Facts Designed for large cables and leads Ideally suited for power generation and distribution Accepts a wide range of stranded copper wires (6 AWG to 000 MM [3-507 mm ] for terminals
3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
Understanding and Inspecting THE DIGITAL BUS. by Jim Sparks
Understanding and Inspecting THE DIGITAL BUS by Jim Sparks 1 Means of Avionics Communication Analog Uses variable signals Voltage Amperage Frequency Discrete Changes a signal state Hi or Lo 1 or 0 On or
EMI Protection De sign Guideline
6/22/66 IINDIX IYSTIMS DIVISION ANN ARIOR, MICH. EMI Protection De sign Guideline PAGI 1 Of' PAGIS Task 97111-02-02-2-00 1. 0 INTRODUCTION This EMI Protection Design Guidelines report has been prepared
FAA APPROVED AIRPLANE MAINTENANCE MANUAL SUPPLEMENT. Eyebrow Window Replacement
FAA APPROVED AIRPLANE MAINTENANCE MANUAL SUPPLEMENT AIRPLANE MAKE: Boeing AIRPLANE MODEL: 737-100, -200, -200C, -300, -400, -500, -600, -700, -700C, -800, -900 TO BE ADDED TO AMM CHAPTER 56-11-XX This
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
DETAIL SPECIFICATION SHEET CABLE, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 OHMS, M17/75-RG214 AND M17/75-RG365
INCH-POUND 20 April 2016 SUPERSEDING w/amendment 2 23 February 20 DETAIL SPECIFICATION SHEET CABLE, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 0 OHMS, M17/7-RG214 AND M17/7-RG36 Inactive for new design after
FAA-TSO C50c Also includes 11933, 11934, non-faa TSO units Document P/N Revision 4, Aug. 2003
PM3000 (11931) 4-Place Standard Intercom (Without Crew) Wiring Diagram PM3000 Unit: DB-5 Male Power In Ground A/C Radio Phone Audio Hi A/C Radio Phone Audio Lo A/C PTT A/C Mic Audio Hi A/C Mic Audio Lo
Portable Signals: INDOT Design Guidance and Specifications
: INDOT Design Guidance and Specifications Joe Bruno, P.E. Traffic Administration, INDOT March 7, 2017 Presentation Overview Background Design Manual 83-5.0 and Design Memo 16-06 Cost and Pay Item Info
Operator s Manual. PP016 Passive Probe
Operator s Manual PP016 Passive Probe 2017 Teledyne LeCroy, Inc. All rights reserved. Unauthorized duplication of Teledyne LeCroy documentation materials is strictly prohibited. Customers are permitted