BCPC2000/39. Commercial Catalogue

Transcription

1 BCPC2000/39 Commercial Catalogue

2 Commercial Catalogue Contents Pages HF SSB Transceivers 1-10 Mains power supply system Solar power supply systems fax & data systems Telephone systems Vehicle tracking systems Automatic tuning antennas Base station antennas Marine whip antennas Interoperability HF Manpack transceiver High power transmitters/ receivers Turnkey systems Spare kits Training Manuals and documents Note:- 1. Specifications are typical. Equipment descriptions and specifications are subject to change without notice or obligation 2. For complete technical specifications please refer to your business development manager 3. weights provided are indicative and are subject to variation, they are provided as guide for operational use of products only. Packed weight will be determined based on orders once received and as such are not indicated in this catalogue.

3 HF SSB Transceivers

4

5 Commercial Catalogue 2030 HF SSB Transceiver BC C kg Standard features: channels with frequency range 1.6 to 30 MHz - Power output 125 W PEP, power input 12 VDC nominal - Software defined core & DSP - Digital Selective Calling & Telcall - 4 & 6 digit 2030 HF SSB Transceiver 2030 HF SSB Transceiver Optional Features*:- - ECCM Options (COMSEC/TRANSEC) BC BCA20010 BCA20015 * For additional options and accessories, please see relevant section detail. Note :- See brochure for more detailed information. BCA20006 BCM20300 Hand microphone with channel up/down buttons BCA20010 Loudspeaker BCA20015 DC power cable and connector - 6 metres BCA20006 Barrett 2030 Operation and installation manual BCM20300 Barrett Communications Commercial Catalogue 1 of 117

6 2050 HF SSB Ttransceiver Commercial Catalogue 2050 HF SSB Transceiver BC C kg Standard features: channels with frequency range 1.6 to 30 MHz - Power output 125 W PEP, power input 12 VDC nominal - Software defined core & DSP - Digital Selective Calling & Telcall - 4 & 6 digit - GPS & RS232 interface 2050 HF SSB Transceiver Optional Features*:- - ECCM Options (COMSEC/TRANSEC) - MILSTD B ALE (JITC certified) - Internal fit high speed modem BC BCA20010 BCA20015 * For additional options and accessories, please see relevant section detail. BCA20006 BCM20500 Note :- See brochure for more detailed information. Hand microphone with channel up/down buttons BCA20010 Loudspeaker BCA20015 DC power cable and connector - 6 metres BCA20006 Barrett 2050 Operation and installation manual BCM20500 Barrett Communications Commercial Catalogue 2 of 117

7 Options Commercial Catalogue Option for Automatic link establishment (ALE) controller x BCO20505 N/A N/A MIL-STD B 2G / FED-STD 1045 ALE Internal Fit Note:- When using ALE at least one ALE fill program is required by the system administrator to set up the ALE network - this fill program is included in the 2000 series programming kit P/N BCA Secure call x x BCO20506 N/A N/A Options A point to point or point to multipoint Secure call system initiated by the entry of a scramble key and secure call selcall. Internal Fit Note:- Selcall option must be fitted. Barrett Communications Commercial Catalogue 3 of 117

8 Options Commercial Catalogue Option for Frequency hopping x BCO20507 N/A N/A 5 or 25 hops per second - no central synchronisation station, no net entry delay or late entry delay. ESU/GPS to be purchased seperately. Internal Fit Note:- This option requires an Australian Government Export Licence. Options ARINC Selcall encoder x BCO20508 N/A N/A Enables transmission of aviation ARINC standard selcall. Internal Fit Voice encryption AES 256 x BCO20509 N/A N/A Enables the 2050 to operate in AES 256 (Advanced encryption standard) mode with fall back analogue FFT scrambler for use on extremely bad HF channels. Internal Fit Note:- Software CD and cables are not included. Please see key injection kit BCA Note:- This option requires an Australian Government Export Licence. Barrett Communications Commercial Catalogue 4 of 117

9 Options Commercial Catalogue Option for Voice encryption DES 56 x BCO20510 N/A N/A Enables the 2050 to operate in DES 56 (Data encryption standard) mode with fall back analogue FFT scrambler for use on extremely bad HF channels. Internal Fit Note:- Software CD and cables are not included. Please see key injection kit BCA Voice scrambler FFT x BCO20511 N/A N/A Enables the 2050 to operate in FFT based voice scramble mode. Note:- Software CD and cables are not included. Please see key injection kit BCA Internal Fit Options Other encryption scrambling devices Other encryption and scrambling devices are available for special applications, please ask our sales department about your specific requirements. Key injection kit for voice encryption AES 256/ DES 56/ FFT x BCA20255 C kg - Scrambler key injection software P/N BCUSB Serial cable P/N BCA USB to serial adaptor P/N BCA92318 Barrett Communications Commercial Catalogue 5 of 117

10 Accessories Commercial Catalogue Option for Mobile pack x x BCA20501 C kg Has all parts required to use the 2030/2050 as a mobile transceiver in a remote control (trunk mount) configuration and to install it. - Universal mounting cradle for main unit - 6 metres control head cable - Control head mounting plate and adjustable arm - Cap screw pack - Barrett tool - suits all Hex cap screws and Philips screws on 2030/ Rubber weatherproofing bungs - Installation kit BCA20004 PC Programming kit - for 2030/2050 x x BCA20001 C kg - Software (operating manual included on the USB) P/N USB Serial cable for 2050 Transceiver with 9 / 25 pin adaptors P/N BCA USB to serial adaptor P/N BCA92318 Accessories GPS receiver x BCA20009 C kg Combined receiver / antenna to suit 2050 Transceiver. - 4 metres cable and connector to suit 2050 Transceiver Remote head interface cable 6 metres x x BCA20005 C kg For 2030/2050 Transceivers. Barrett Communications Commercial Catalogue 6 of 117

11 Accessories Commercial Catalogue Option for DC power cable and connector - 6 metres x x BCA20006 C kg 6 metres power cable with DB-15 combination connector to suit 2030/2050 Transceiver. Hand microphone with channel up/down buttons x x BCA20010 C kg Microphone with up/down buttons and connector to suit 2030/2050 Transceiver. Hand / speaker microphone x x BCA20023 C kg Combined speaker microphone with up/down buttons and connector to suit 2030/2050 Transceiver. Headphones - lightweight x x BCA20013 C kg Accessories Folding headphones with connector to suit 2030/2050 Transceiver - colour black. Barrett Communications Commercial Catalogue 7 of 117

12 Accessories Commercial Catalogue Option for Headset x x BCA20040 C kg Folding headphones with microphone to suit 2030/2050 Transceiver - colour black. Loudspeaker x x BCA20015 C kg Extension speaker with connector to suit 2030/2050 Transceiver. Universal mobile mounting cradle x x BCA20003 C kg Suits 2050, 2030, 2060, 2061, 2022, 2021, 2023, Accessories Fan unit x BCA20002 C kg For 2050 transceiver in applications such as mobile data and medium duty cycle applications. Note:- Refer P/N BCA20056 for continuous FEC applications for Barrett Communications Commercial Catalogue 8 of 117

13 Accessories Commercial Catalogue Option for Installation kit x x BCA20004 C kg - Large selection of screws to accommodate most installations - Cable ties - Adhesive cable clips - Screw driver attachment to suit screws for drill - Rubber amalgamation tape - Standard insulation tape - Power cable lugs - ATC fuse holder and 25 Amp fuses Interference suppression kit x BCA20008 C kg To aid in supressing vehicle produced interference from alternators and small motors and ignition system. - Supressors for alternators and motors - Lugs - Earthing cable - Clips 3U Side - plate pack x BCA20019 C kg Accessories Enables vertical stacking of three 2000 Series units. - Two side plates - Six side plate capstans Barrett Communications Commercial Catalogue 9 of 117

14 Accessories Commercial Catalogue Option for U Side - plate pack x BCA20016 C kg Enables vertical stacking of two 2000 Series units. - Two side plates - Four side plate capstans 500 Hz crystal filter x BCA20502 N/A N/A For 2050 Transceiver - used for SITOR and PACTOR I & PACTOR II operation. Internal Fit 3.1 khz mechanical filter x BCA20505 N/A N/A For 2050 Transceiver when full 300 Hz khz 3 db audio bandwidth required. Internal Fit Accessories Desk microphone x x BCA20011 C6 1.0 kg For 2030/2050 Transceiver. CW key - lightweight x x BCA20014 C kg Brass CW key with leg strap and connector to suit 2030/2050 Transceiver. Barrett Communications Commercial Catalogue 10 of 117

15 Mains power supply system

16

17 Commercial Catalogue 2022 Mains power supply BC C kg Features: VDC 22 Amp - 88 to 264 AC 60/50 Hz input (auto ranging) - No-break battery backup facility - Full protection 2022 Mains power supply 2022 Mains power supply BC SA Note :- See brochure for more detailed information. SA BCM20220 IEC mains cord UK, European, AUS, JP and US style Power cable to 2030/2050 SA SA Mains power supply operators manual BCM20220 Barrett Communications Commercial Catalogue 13 of 117

18 Accessories Commercial Catalogue Battery backup cable 3 metres - for 2022 Power supply BCA C kg To connect external battery for no-break battery backup in case of AC supply failure. - Universal battery lugs 100 Ah 12 V sealed solar block battery - air-freightable BCA92203 N/A 32 kg For no-break battery backup in case of AC supply failure. Accessories Cabling kit for paralleling batteries - per additional battery, consists of two heavy duty cables with lugs and two battery lugs To parallel several batteries as above to increase the battery backup time in case of AC supply failure. BCA92208 C kg Barrett Communications Commercial Catalogue 14 of 117

19 Solar power supply systems

20

21 Commercial Catalogue Option for Economy solar power supply x x BC N/A 17 kg To power Barrett 2000 series transceiver. - 1 x 120 W solar module - 1 x 30 A solar regulator Solar power supplies Solar power supplies Notes:- - All cables are fitted with quick connect plugs. - Installation instructions - All packed for air-freight - A 100 Ah battery capacity is required to operate this solar system (batteries not included) Barrett Communications Commercial Catalogue 17 of 117

22 Solar power supplies Commercial Catalogue Option for Light duty ground mounted solar power supply x x BC N/A 65 kg To power Barrett 2000 Series transceiver based on a 12 hour operational day (equipment off overnight) 2 hours of voice or selcall transmission per 12 hour period and in receive mode for 12 hours. Solar power supplies - 2 x Sun power 90 W solar module - Ground mount aluminium frame - MC male paralleling plug - MC female paralleling plug - 6 x 1 core 10 mm cable red (PVC) - 6 x 1 core 10 mm cable black (PVC) - 30 A regulator x 1 core 16 mm cable red (PVC) x 1 core 16 mm cable black (PVC) - Bird spike long ( metre) Notes:- - All cables are fitted with quick connect plugs. - Installation instructions - All packed for air-freight - For 2 day autonomous operation 100 Ah battery capacity is required (batteries not included) Barrett Communications Commercial Catalogue 18 of 117

23 Commercial Catalogue Option for Light duty roof mounted solar power supply x x BC N/A 65 kg To power Barrett 2000 Series transceiver based on a 12 hour operational day (equipment off overnight) 2 hours of voice or Selcall transmission per 12 hour period and in receive mode for 12 hours. Solar power supplies Solar power supplies - 2 x Sun power 90 W solar module - Roof mount aluminium frame - MC male paralleling plug - MC female paralleling plug - 6 x 1 core 10 mm cable red (PVC) - 6 x 1 core 10 mm cable black (PVC) - 30 A regulator x 1 core 16 mm cable red (PVC) x 1 core 16 mm cable black (PVC) - Bird spike long ( metre) Notes:- - All cables are fitted with quick connect plugs. - Installation instructions - All packed for air-freight - For 2 day autonomous operation 100 Ah battery capacity is required (batteries not included) Barrett Communications Commercial Catalogue 19 of 117

24 Solar power supplies Commercial Catalogue Option for Heavy duty ground mounted solar power supply x x BC N/A 129 kg To power Barrett 2000 Series transceiver based on 4 hours of voice or selcall transmission per 24 hour period and in receive mode for 24 hours. - 2 x Solar module 130 W - Ground mount aluminium frame - MC male paralleling plug - MC female paralleling plug - 6 x 1 core 10 mm cable red (PVC) - 6 x 1 core 10 mm cable black (PVC) - 30 A regulator x 1 core 16 mm cable red (PVC) x 1 core 16 mm cable black (PVC) - Bird spike long ( metre) Solar power supplies Notes:- - All cables are fitted with quick connect plugs. - Installation instructions - All packed for air-freight - For 2 day autonomous operation 100 Ah battery capacity is required (batteries not included) Barrett Communications Commercial Catalogue 20 of 117

25 Commercial Catalogue Option for Heavy duty roof mounted solar power supply x x BC N/A 129 kg To power Barrett 2000 Series transceiver based on 4 hours of voice or selcall transmission per 24 hour period and in receive mode for 24 hours. - 2 x Solar module 130 W - Roof mount aluminium frame - MC male paralleling plug - MC female paralleling plug - 6 x 1 core 10 mm cable red (PVC) - 6 x 1 core 10 mm cable black (PVC) - 30 A regulator x 1 core 16 mm cable red (PVC) x 1 core 16 mm cable black (PVC) - Bird spike long ( metre) Solar power supplies Solar power supplies Notes:- - All cables are fitted with quick connect plugs. - Installation instructions - All packed for air-freight - For 2 day autonomous operation 100 Ah battery capacity is required (batteries not included) Barrett Communications Commercial Catalogue 21 of 117

26 Solar power supplies Commercial Catalogue Option for Data system ground mounted solar power supply x x BC N/A 270 kg To power Barrett 2000 Series transceiver, with data modem and notebook computer, based on 6 hours of data, voice or selcall transmission per 24 hour period and in receive mode for 24 hours. Solar power supplies - 11 x Solar module 130 W - Ground mount aluminium frame - Marshalling enclosure - 5 x MC male paralleling plug - 5 x MC female paralleling plug - 36 x 1 core 10 mm cable red (PVC) - 36 x 1 core 10 mm cable black (PVC) - 2 x 60 A regulator x 1 core 16 mm cable red (PVC) x 1 core 16 mm cable black (PVC) - 3 x Bird spike long ( metre) Notes:- - All cables are fitted with quick connect plugs. - Installation instructions - All packed for air-freight - For 2 day autonomous operation 100 Ah battery capacity is required (batteries not included) Barrett Communications Commercial Catalogue 22 of 117

27 Commercial Catalogue Option for Data system roof mounted solar power supply x x BC N/A 270 kg To power Barrett 2000 Series transceiver, with data modem and notebook computer, based on 6 hours of data, voice or selcall transmission per 24 hour period and in receive mode for 24 hours. Solar power supplies Solar power supplies - 11 x Solar module 130 W - Roof mount aluminium frame - Marshalling enclosure - 5 x MC male paralleling plug - 5 x MC female paralleling plug - 36 x 1 core 10 mm cable red (PVC) - 36 x 1 core 10 mm cable black (PVC) - 2 x 60 A regulator x 1 core 16 mm cable red (PVC) x 1 core 16 mm cable black (PVC) Notes:- - All cables are fitted with quick connect plugs. - Installation instructions - All packed for air-freight - For 2 day autonomous operation 100 Ah battery capacity is required (batteries not included) Barrett Communications Commercial Catalogue 23 of 117

28 This page intentionally left blank Barrett Communications Commercial Catalogue 24 of 117

29 fax & data systems

30

31 Commercial Catalogue 2020 HF station with internet and fax gateway - external modem BC SC kg A fast, error corrected, HF system with an internet and fax gateway. Note:- A suitable PC or laptop and suitable antenna system is required to complete this station fax & data system - external modem package BC BC BC fax & data system BCA BCA92318 BCA20019 Note :- See brochure for more detailed information. BCA90021 BCA20002 BCA Clover 2000 HF Data modem BC HF Transceiver fitted with required options BC Mains power supply BC Fan unit Cable 2023 Modem to 2050 Transceiver Cable 2023 Modem to computer USB to serial adaptor BCA20002 BCA90021 BCA BCA HF station with internet gateway software BCA U Side - plate pack BCA20019 Barrett Communications Commercial Catalogue 27 of 117

32 2020 fax & data system Commercial Catalogue 2020 HF station with internet and fax gateway - internal modem BC SC kg A fast, error corrected, HF system. Note:- A suitable PC or laptop and suitable antenna system is required to complete this station fax & data system - internal modem package BC BC BC Note :- See brochure for more detailed information. BCA90023 BCA92318 BCA20002 BCA Clover 2000 HF Data modem internal fit PCB BC HF Transceiver fitted with required options BC Mains power supply BC Fan unit Programming cable USB to serial adaptor BCA20002 BCA90023 BCA HF station with internet gateway software BCA Barrett Communications Commercial Catalogue 28 of 117

33 Commercial Catalogue 2024 Clover 2000 HF Fax system - one station BC SC3 9.0 kg A fully error corrected HF Link between two G3 Fax machines. Note:- A suitable antenna system and G3 Fax machine is required to complete this station Clover 2000 HF Fax system - one station package BC BC BC BCA20019 BCA Clover 2000 HF fax system Note :- See brochure for more detailed information. SA BCA92318 BCA BCM20240 BCA BCA Clover 2000 HF Fax modem BC HF Transceiver fitted with required options BC Mains power supply BC RJ-45 cable, 2024 Modem to G3 fax Fan unit Cable 2024 Modem to 2050 Transceiver SA BCA20002 BCA Clover 2000 HF Fax system operators manual BCM U Side - plate pack USB to serial adaptor Cable 2023 Modem to computer BCA20019 BCA92318 BCA HF station with internet gateway software BCA Barrett Communications Commercial Catalogue 29 of 117

34 Options Commercial Catalogue Option for Clover 2000 HF Data modem x BC C kg - Cable 2024 Modem to 2050 Transceiver P/N BCA Cable 2023 Modem to computer P/N BCA USB to serial adaptor P/N BCA HF with internet and fax gateway software P/N BCA BC BCA Options BCA90021 BCA BCA Clover 2000 HF Data modem internal fit PCB x BC C kg Fits internally in 2050, requires 2020 Software to operate. - Serial cable P/N BCA USB to serial adaptor P/N BCA HF with internet and fax gateway software P/N BCA Internal Fit BC BCA BCA90023 BCA92318 Barrett Communications Commercial Catalogue 30 of 117

35 Options Commercial Catalogue Option for Clover 2000 HF Fax and data modem x BC C kg Requires G3 fax machine for point to point fax operation and can also be used with 2020 Software. - Cable 2024 Modem to 2050 Transceiver P/N BCA RJ-45 cable, 2024 Modem to G3 Fax P/N SA Cable 2024 Modem to computer P/N BCA USB to serial adaptor P/N BCA Clover 2000 HF Fax system operator s manual P/N BCM HF with internet and fax gateway software P/N BCA BC BCA90021 SA Options BCA BCA92318 BCM20240 BCA MIL-STD high speed HF Modem with RC-50B Government communications software suite x BC N/A N/A Wave forms:- STANAG 4285, 4415, 4481, 4529, 4539 MIL-STD A-5.3, MIL-STD B, MIL-STD B APPENDIX C Modem - RC-50B 5066 Based combat communications suite - 2G ALE (MIL-STD B) + LP according to FED-STD Cable modem to Serial cable to suit modem to PC with DB25 and DB9 adaptors Note :- See brochure for more detailed information. Barrett Communications Commercial Catalogue 31 of 117

36 Accessories Commercial Catalogue Option for Cable 2023 Modem to computer x BCA C kg With 9 / 25 pin adaptor and USB to serial adaptor. Note:- This cable has connections for DTS and RTS and cannot be used as a 2050 Programming cable or with the 977 Tracking package. Base station computer package x BCA N/A 9.50 kg Minimum specification. - Current speed desktop PC computer - Hard drive, CD ROM - Com. ports - 15 monitor - Windows operating system installed - Computer handbooks Accessories Note:- International brand name desktop PC computers are supplied to ensure availability support and maintenance. Field station computer package x BCA N/A 2.55 kg - Current speed laptop / notebook - Hard drive, CD ROM - Serial port - Power adaptor and cords - Windows operating system installed - Computer handbooks Note:- International brand name laptop / notebooks are supplied to ensure availability support and maintenance. Barrett Communications Commercial Catalogue 32 of 117

37 Telephone systems

38

39 Commercial Catalogue 2060 HF Telephone interconnect - base station package BC20601 SC kg Features:- - Full 16 digit dialling access from Telcall equipped HF Mobiles and remote base stations - Access to 98 telephone numbers, pre-programmed in the 2060 Telephone interconnect, for 4 and 6 digit selcall equipped HF Mobiles and remote base stations - Remote logging and supervisory functions using its internal modem and the supplied desktop PC modem card and 2060 Remote supervisory software 2060 HF Telephone interconnect - base station package BC20600 BC HF telephone interconnect BC BCM20600 Note:- See brochure for more detailed information. BCA20602 BCA90021 BCA20019 BCUSB Telephone interconnect BC HF Transceiver fitted with Selcall, Telcall and RS-232 Control option BC Mains power supply BC U Side - plate pack BCA Remote supervisory software BCUSB Remote supervisory software connecting cable BCA Operation and installation manual BCM20600 Interface cable to connect 2061 to 2050 Transceiver BCA90021 Barrett Communications Commercial Catalogue 35 of 117

40 2060 HF telephone interconnect Commercial Catalogue 2060 HF Telephone interconnect BC20600 C kg Features:- - Full 16 digit dialling access from Telcall equipped HF Mobiles and remote base stations - Access to 98 telephone numbers, pre-programmed in the 2060 Telephone interconnect, for 4 and 6 digit selcall equipped HF Mobiles and remote base stations - Remote logging and supervisory functions using its internal modem and the supplied desktop PC Modem card and 2060 Remote supervisory software 2060 HF Telephone interconnect BC20600 BCA90021 SA Note:- See brochure for more detailed information. BCA20602 BCUSB20601 BCM Telephone interconnect BC20600 Interface cable to connect 2060 to 2050 Transceiver Telephone cable (2 metres) with RJ-45 Connectors BCA90021 SA Remote supervisory software BCUSB Remote supervisory software connecting cable BCA Operation and installation manual BCM20600 Barrett Communications Commercial Catalogue 36 of 117

41 Commercial Catalogue 2061 HF Telephone patch BC20610 C kg Provides manual control telephone interface between Barrett HF Radios & Telephone networks. Features:- - Adaptive DSP hybrid to provide reliable VOX operation - Universal interface that will operate with Barrett or OEM transceivers - Intuitive operation BC20610 BCA HF Telephone patch SA BCM HF telephone patch Note:- See brochure for more detailed information. Interface cable to connect 2061 to 2050 Transceiver Telephone cable (2 metres) with RJ-45 Connectors BCA90021 SA Operation and installation manual BCM20610 Barrett Communications Commercial Catalogue 37 of 117

42 This page intentionally left blank Barrett Communications Commercial Catalogue 38 of 117

43 Vehicle tracking systems

44

45 Commercial Catalogue Option for Barrett 977 Vehicle tracking system for 1-10 mobiles x BC97700 C kg Vehicle tracking software on CD Vehicle tracking operators manual P/N BCM Serial cable for 2050 Transceiver with 9/25 pin adaptor P/N BCA USB Dongle - USB to serial adaptor P/N BCA Vehicle tracking systems 977 Vehicle tracking systems Barrett 977 Vehicle tracking system for 1-25 mobiles x BC97701 C kg Vehicle tracking software on CD Vehicle tracking operators manual P/N BCM Serial cable for 2050 Transceiver with 9/25 pin adaptor P/N BCA USB Dongle - USB to serial adaptor P/N BCA92318 Barrett 977 Vehicle tracking system for 1-50 mobiles x BC97702 C kg Vehicle tracking software on CD Vehicle tracking operators manual P/N BCM Serial cable for 2050 Transceiver with 9/25 pin adaptor P/N BCA USB Dongle - USB to serial adaptor P/N BCA92318 Barrett 977 Vehicle tracking system for mobiles x BC97703 C kg Vehicle tracking software on CD Vehicle tracking operators manual P/N BCM Serial cable for 2050 Transceiver with 9/25 pin adaptor P/N BCA USB Dongle - USB to serial adaptor P/N BCA92318 Barrett Communications Commercial Catalogue 41 of 117

46 977 Vehicle tracking systems Commercial Catalogue Barrett 977 Vehicle tracking system, dealer demonstration copy, for 1 mobile only Vehicle tracking software on CD Vehicle tracking operators manual P/N BCM Serial cable for 2050 Transceiver with 9/25 pin adaptor P/N BCA USB Dongle - USB to serial adaptor P/N BCA92318 Option for Vehicle tracking systems x BC97709 C kg Barrett 977 Vehicle tracking system, non-interactive dealer demonstration copy x BC97710 C kg - Demonstration 977 Non-interactive software only (no manual supplied) Barrett Communications Commercial Catalogue 42 of 117

47 Automatic tuning antennas

48

49 Commercial Catalogue Option for Automatic tuning mobile HF antenna x x BC C kg Features:- - Frequency range 2 to 30 MHz - Fast tuning - typically less than 2 seconds Note:- See brochure for more detailed information. Automatic tuning antennas Automatic tuning antennas Barrett 2019 Antenna Control cable 2019 Antenna to transceiver - 6 m Fibreglass split whip top section and bottom section Standard spring black - for 2019 Barrett 2019 Installation sheet BCA SA-2019 BCA BCA BCM SA-2019 BCA BCA BCA BCM Internal fit GPS Receiver for 2019 Antenna x x BCA N/A N/A GPS receiver fitted inside the 2019 Antenna, interfaces to the 2050 Transceiver via the RF control cable supplied with 2019 Antennas. Internal Fit NVIS Kit - for 2019 x x BCA T kg Two whip sections complete with tie down harness to extend the whip on the Barrett 2019 Automatic tuning mobile antenna for NVIS operation. The usable frequencies for NVIS communications are between 2 MHz and 15 MHz. Length mm. Barrett Communications Commercial Catalogue 45 of 117

50 Automatic tuning antennas Commercial Catalogue Option for Stainless steel whip x x BCA T kg Single section stainless steel whip for the Barrett 2019 Automatic tuning mobile antenna for NVIS operation. Lenght 2080 mm. Automatic tuning antennas Extendable whip x x BCA T kg Tapered, blackened, aluminium whip shaft with pull out, blackened stainless steel whip for use with 2019 automatic tuning mobile antenna Unextended length 810 mm Extended length 1560 mm Fibreglass split whip top section and bottom section x x BCA T kg - one middle and one top MIL-SPEC Whip sections (colour black) - Length 1610 mm Standard spring black - for 2019 x x BCA C kg 2019 Standard spring - colour black. Control cable 2019 Antenna to transceiver - 6 metres x x BCA C kg 6 metres - composite cable combining control and coaxial cable - with connectors to suit 2019 Automatic tuning mobile when used with 2030/2050 Transceiver. Barrett Communications Commercial Catalogue 46 of 117

51 Commercial Catalogue Option for Control cable 2019 Antenna to transceiver - 10 metres x x BCA C kg 10 m - composite cable combining control and coaxial cable - with connectors to suit 2019 Automatic tuning mobile when used with 2030/2050 Transceiver. Automatic tuning antennas Automatic tuning antennas Universal antenna mounting bracket x x BCA90033 C kg Suit 2019 Automatic tuning mobile antennas mounted on bull bars Mobile magnetic loop HF antenna x x BC N/A N/A Is ideal for NVIS propagation or applications requiring constant coverage for distances of km. Note:- See brochure for more detailed information. BC BCA BCM metres Interface cable and coaxial cable BCA Operation and installation manual BCM Barrett Communications Commercial Catalogue 47 of 117

52 Automatic tuning antennas Commercial Catalogue Option for Automatic tuning horizontal dipole (3-30 MHz) W PEP x x BC C5 & T5 10 kg Designed for base station applications where space is at a premium but a high performance is still required. The integrated Rx preamp provides broadband impedance matching during scan mode (receive) operation. This ensures compatibility with modern link establishment protocols such as ALE, Selcall and Modem/Data modes. Automatic tuning antennas Installed width of antenna is 8 metres metres of integral RF control cable and connectors Note:- See brochure for more detailed information Automatic tuning horizontal dipole (2-30 MHz) W PEP x x BC C5 & T5 7.0 kg The Barrett 4017 is a compact base antenna solution for installations in areas with space limitations where normal wire broadband antennas are not practical. Full Coverage from 2~30MHz. Omni directional Radiation, Can be installed on wide range of masts & poles Recommended height 6 ~ 10 metres Max installed length 5.7 metres Compact packaging for Air Shipment ALE compatible - 30 metres of integral RF control cable and connectors P/N BCA Note:- See brochure for more detailed information Barrett Communications Commercial Catalogue 48 of 117

53 Commercial Catalogue Option for Automatic antenna tuner x x BC C kg Features:- Frequency Range: 2-30MHz tuneable Power Rating: 150 Watts PEP Memory tune in <130ms, Non-Memory tune in <1 sec ALE compatible Frequency-hopping compatible MIL-STD-810F Waterproof,Vibration, and Dust Automatic tuning antennas Automatic tuning antennas - 6 metre extension control cable and connectors P/N BCA Automatic antenna tuner x x BC91100 C kg 1.6 to 30 MHz - Tunes whips and long wires. - 6 metres extension control cable and connectors 6 metres Antenna extension control cable - to suit 2019 or 911 x x BCA90032 C kg Composite cable combining control and coaxial cable - with connectors to suit 2019 automatic tuning mobile antenna and 911 Automatic antenna tuner when used with 2030/2050 Transceiver. 10 metres Antenna extension control cable - to suit 2019 or 911 x x BCA90040 C kg Composite cable combining control and coaxial cable - with connectors to suit 2019 Automatic tuning mobile antenna and 911 Automatic antenna tuner when used with 2030/2050 Transceiver. Barrett Communications Commercial Catalogue 49 of 117

54 Automatic tuning antennas Commercial Catalogue Option for " E " plate (earth plate) x x BCA91700 N/A N/A Is a grounding plate which is mounted to the bottom of the boat to ensure adequate/effective grounding. Automatic tuning antennas Insulator - feed through x x BCA91701 N/A N/A To feed high voltage leads through decks / walls to 35 mm thickness. Insulator - back stay x x BCA91702 N/A N/A To insulate the back stay of a yacht to use as an HF antenna - up to 1100 kg strain. Copper earth strap (per metre) x x BCA91703 N/A N/A For RF earthing between antenna tuner, transceiver and E plates or other earthing points - 50 mm x 0.5 mm. Radial earth mat / ground plane x x BCA20026 N/A N/A Counterpoise to use with whip in fixed high power base station applications 12 x 10 metres radials. Barrett Communications Commercial Catalogue 50 of 117

55 Base station antennas

56

57 Commercial Catalogue Option for Multi-wire broadband dipole (2-30 MHz) W PEP x x BC91200 N/A 6.0 kg 27 metres stainless steel, fibreglass spreaders and encapsulated baluns and loads metres of RG-58AU coaxial cable with waterproof UHF coaxial connectors Base station antennas Base station antennas Note:- Masts illustrated not provided. 912 Single-wire broadband dipole (2-30 MHz) W PEP x x BC91201 N/A 3.6 kg 27 metres stainless steel and encapsulated baluns and loads metres of RG-58AU coaxial cable with waterproof UHF coaxial connectors Note:- Masts illustrated not provided. 912 Multi-wire broadband dipole (2-30 MHz) W PEP x x BC91202 N/A 15 kg 27 metres stainless steel, fibreglass spreaders and encapsulated baluns and loads metres of RG-213 coaxial cable with waterproof UHF coaxial connectors Note:- Ground catenary and masts illustrated not provided. Barrett Communications Commercial Catalogue 53 of 117

58 Base station antennas Commercial Catalogue Option for Multi-wire broadband dipole ( MHz) - 1 kw continuous x x BC91203 N/A 15 kg 27 metres stainless steel, fibreglass spreaders and encapsulated baluns and loads metres of RG-213 coaxial cable with waterproof UHF coaxial connectors Base station antennas Note:- Ground catenary and masts illustrated not provided. 912 Multi-wire broadband dipole (2-30 MHz) - 1 kw continuous x x BC91207 N/A 25 kg 54 metres stainless steel, fibreglass spreaders and encapsulated baluns and loads metres of RG-213 coaxial cable with waterproof UHF coaxial connectors Note:- Ground catenary and masts illustrated not provided. Barrett Communications Commercial Catalogue 54 of 117

59 Accessories Commercial Catalogue Option for Halyard and pulley kit - to suit 912 Broadband antennas x x BCA91201 C kg - 2 off stainless steel pulleys metres of braided nylon halyard NVIS kit - to suit BC W PEP Multi-wire broadband dipole antenna x x BCA91202 C kg - Stainless steel vertical feeder - All fixing hardware - Installation manual Note :- It does not suit 500 W or 1 kw broadband dipole antennas Offset bracket and pulley x x BCA90200 N/A 2.20 kg To facilitate mounting of 912 Broadbands or 915 Wire dipoles in an inverted V configuration on either 902 Winch-up towers or 902 Telescopic masts. Pulley to suit 4 mm halyard. Accessories 30 metres Coaxial cable RG-58 x x BCA90047 C kg 30 metres of RG-58 coaxial cable with N type connectors. Barrett Communications Commercial Catalogue 55 of 117

60 Accessories Commercial Catalogue Option for Coaxial cable RG-213 (per metre) x x BCA90045 C kg High quality RG-213 coaxial cable. Coaxial connector - UHF - Suit RG-213 x x BCA90046 C kg High quality waterproof coaxial connector - to suit RG-213 coaxial cable above. Lightning arrestor 1S-50UX-CO x x BCA90034 T1 & C kg Accessories - 1 x Surge arrestor with PL259/UHF (female) connectors - 1 x 5 metres length of RG58 Coaxial cable with UHF (male) - 1 x Steel dolly - 1 x 3 metres earth braid - 1 x Brass cable clamp assembly - 1 x Copper plated steel earth rod Lightning arrestor 1 Kw x x BCA T1 & C kg - 1 x Surge arrestor with PL259/UHF (female) connectors - 1 x 5 metres length of RG213 Coaxial cable with UHF (male) - 1 x Steel dolly - 1 x 3 metres earth braid - 1 x Brass cable clamp assembly - 1 x Copper plated steel earth rod Barrett Communications Commercial Catalogue 56 of 117

61 Commercial Catalogue 10 metres Lightweight, air transportable aluminium mast - nylon guys - ground mounting Suitable for rapid deployment of Barrett W PEP Broadband antennas or 915 Series wire dipoles. Packed length 2 metres, suitable for air-freight. - Offset bracket and pulleys - Nylon guys, guy anchor pegs, pulleys and halyard - Installation instructions Option for Antenna masts and towers x x BC90205 N/A 27 kg Antenna masts and towers 10 metres Lightweight, air transportable aluminium mast - stainless steel guys - ground mounting Suitable for rapid deployment of Barrett W Broadband antennas or 915 Series wire dipoles. Packed length 2 metres, suitable for air-freight. - Offset bracket and pulleys - S/S guys, guy anchor pegs, pulleys and halyard - Installation instructions x x BC90206 N/A 32 kg Barrett Communications Commercial Catalogue 57 of 117

62 Antenna masts and towers Commercial Catalogue 10 metres Lightweight, air transportable aluminium mast - stainless steel guys - roof mounting Suitable for rapid deployment of Barrett W Broadband antennas or 915 Series wire dipoles. Packed length 2 metres, suitable for air-freight. - Offset bracket and pulleys - S/S guys, guy anchor brackets, pulleys and halyard - Installation instructions. Option for Antenna masts and towers x x BC90207 N/A 32 kg 6 metres Lightweight, air transportable aluminium mast - nylon guys - ground mounting Suitable for rapid deployment of Barrett 2017 Automatic Tuning Horizontal Dipole. Packed length 2 metres, suitable for air-freight. - Nylon guys, guy anchor pegs and halyard - Installation instructions x x BC90209 N/A 20 kg Barrett Communications Commercial Catalogue 58 of 117

63 Marine whip antennas

64

65 Commercial Catalogue Option for metres Marine swingdown whip x x BC91710 N/A 2.0 kg - Adjustable stainless steel swingdown base Marine whip antennas Marine whip antennas 6 metres Two piece marine sidemounted whip antenna x x BC91711 N/A 3.0 kg - Two side mounting insulators Barrett Communications Commercial Catalogue 61 of 117

66 Marine whip antennas Commercial Catalogue Option for metres High efficiency marine sidemounted whip antenna x x BC91712 N/A 8 kg - Two side mounting insulators Marine whip antennas 10 metres GMDSS High power whip x x BC91713 N/A 24 kg - Base mount with side feed Barrett Communications Commercial Catalogue 62 of 117

67 Interoperability

68

69 Commercial Catalogue Option for VHF/UHF to HF Crossgate x BC C kg Features:- - Crossgate control by DTMF commands on VHF/UHF work or unique Selcall from the HF work Interoperability Interoperability - Interface cable (0.5 metres) to connect to 2050 Transceiver - Interface cable (0.5 metres) with tails to connect to customer supplied VHF/UHF Equipment Operation and installation manual P/N BCM20620 Note :- See brochure for more detailed information. BC BCM HF receiver antenna multi-coupler x x BC C kg Features:- - High IP3 performance - Eight isolated 50 ohm outlets - 12 VDC supply voltage metre coax cable P/N BCA Power cable to 2030/2050 P/N SA Operation and installation manual P/N BCM20710 BCA90028 BC BCM20710 SA Barrett Communications Commercial Catalogue 65 of 117

70 This page intentionally left blank Barrett Communications Commercial Catalogue 66 of 117

71 HF Manpack transceiver

72

73 Commercial Catalogue 2090 HF Manpack transceiver BC C kg Standard features: channels with frequency range 1.6 to 30 MHz - Power output W PEP, power input 22 VDC nominal - Software defined core & DSP - Digital Selective Calling & Telcall - 4 & 6 digit - GPS & RS232 interface - Meets MIL-STD 810G for shock, temperature, vibration, dust and immersible to 1 m for 1 hr 2090 HF Manpack transceiver 2090 HF Manpack transceiver Optional Features*:- - ECCM Options (COMSEC/TRANSEC) - MIL STD B ALE (JITC certified) - Internal fit high speed modem BC BCM20900 * For additional options and accessories, please see relevant section detail. Note:- See brochure for more detailed information HF Manpack transceiver BC Advanced handset Barrett 2090 operation and installation manual BCM20900 Barrett Communications Commercial Catalogue 69 of 117

74 Options Commercial Catalogue Automatic link establishment (ALE) controller BCO20505 N/A N/A MIL STD B ALE (JITC certified) Internal Fit Note:- When using ALE at least one ALE fill program is required by the system administrator to set up the ALE network - this fill program is included in the 2000 Series programming kit P/N BCA Secure call BCO20506 N/A N/A Options A point to point or point to multipoint Secure call system initiated by the entry of a scramble key and Secure call selcall. Note:- Selcall option must be fitted. Internal Fit Frequency hopping BCO20507 N/A N/A 5 or 25 hops per second - no central synchronisation station, no net entry delay or late entry delay. ESU/GPS to be purchased separately. Internal Fit Note:- This option requires an Australian Government Export Licence. Voice encryption AES 256 BCO20509 N/A N/A Enables the 2090 to operate in FFT based voice scramble mode. Internal Fit Note:- Software and cables are not included. Please see key injection kit BCA Voice encryption DES 56 BCO20510 N/A N/A Enables the 2090 to operate in FFT based voice scramble mode. Note:- Software and cables are not included. Please see key injection kit BCA Internal Fit Barrett Communications Commercial Catalogue 70 of 117

75 Options Commercial Catalogue Voice scrambler FFT BCO20511 N/A N/A Enables the 2090 to operate in FFT based voice scramble mode. Internal Fit Note:- Software and cables are not included. Please see key injection kit BCA Other encryption scrambling devices Other encryption and scrambling devices are available for special applications, please ask our sales department about your specific requirements. Key injection kit for DES 56/ AES 256/ FFT C kg - Scrambler Key Injection Software P/N BCUSB Serial cable P/N SA USB to serial adaptor P/N BCA92318 Options Clover 2000 external modem with USB interface & internet & fax gateway software BC C kg Clover 2000 external modem powered by USB interface from connected ruggedised laptop (not included) running the communications suite software. - Cable to suit 2090 Manpack - Cable modem to USB - Instruction manual - Barrett 2020 HF and fax gateway software P/N USB Barrett Communications Commercial Catalogue 71 of 117

76 Accessories Commercial Catalogue Battery pack 10 Ah C kg 16.8 V 10 Ah Lithium Ion - colour black. Waterproof speaker / microphone C kg With 15 pin connector. Accessories Advanced handset C kg Advanced handset with waterproof speaker, microphone, Press-To-Talk (PTT) button and backlit control keypad for use with advanced software features such as selcall, groupcall, key entry and front panel programming. Colour black. Barrett Communications Commercial Catalogue 72 of 117

77 Accessories Commercial Catalogue Headphones - lightweight C kg Folding headphones with 5 pin connector - colour black. CW key - lightweight C kg Brass CW key with leg strap and 6 pin connector. Collapsible 3 metres whip C kg With gooseneck - colour black. Accessories Tape whip metres C kg For manpack operation in receive mode (for transmission from 5 to 30 MHz but at limited efficiency). Barrett Communications Commercial Catalogue 73 of 117

78 Accessories Commercial Catalogue Emergency long wire antenna C kg With adaptor to suit whip stud on 2090 manpack transceivers. Counterpoise earth kit - single-wire C kg Recommended to increase the efficiency of the 2090 Operating with whip antennas below 3 MHz. - Winding hub, wire earth radial and peg - Carry bag - colour black Accessories Counterpoise earth kit - multi-wire C kg Recommended to increase the efficiency of the 2090 Operating with whip antennas below 3 MHz when in dry soil or desert areas where normal earth connections are difficult to achieve. - Winding hub, wire earth radials and weights - Carry bag - colour black Barrett Communications Commercial Catalogue 74 of 117

79 Accessories Commercial Catalogue Rapid deployment broadband dipole antenna W C kg Operates from 2 to 30 MHz without adjustment W PEP max. Can be deployed as full length broadband dipole or in compact form. Manufactured with Kevlar radiators and UV resistant Dacron cords. - Radiators and loads wound on reusable spools - Lanyards wound on reusable spools with throw and securing weights - 10 metres of RG-58AU coaxial cable, with waterproof BNC and UHF coaxial connectors - Carry bag - colour black Rapid deployment wire dipole antenna W C kg Operates from 2 to 30 MHz W PEP max. Frequency markers attached to Kevlar radiators. - Lanyards wound on reusable spools with throw and securing weights - 10 metres of RG-58AU coaxial cable, with waterproof BNC and UHF coaxial connectors - Carry bag - colour black Portable mast C kg Accessories Suitable for rapid deployment broadband dipole antenna W and rapid deployment wire dipole antenna W. - 7 pieces mast - Guys on winders, earth pegs, guy pegs and hammer - Carry bag - colour black Barrett Communications Commercial Catalogue 75 of 117

80 Accessories Commercial Catalogue Backpack for manpack - colour black BCA C kg The full pack provides for the 2090 and various accessories including wire antennas and spare battery packs. A pouch is provided to hold the 2090 s removable display and handset. The side packs can be detached from pack to make the pack more compact. Note:- Solar panel bag not included. See Rapid deploy solar panel P/N BCA Clover 2000 internal modem with internet and fax gateway software C kg Operates with the supplied Barrett 2020 HF Data system software providing full facilities and connection to the Internet and international fax system. Internal Fit Accessories - Internal fit modem PCB P/N BCA Serial cable with 15 pin MIL-STD connectors and DB-9 adaptors P/N SA Barrett 2020 HF and fax gateway software P/N USB USB SA BCA Universal AC/DC power adaptor C kg For charging and operating the manpack transceiver or manpack battery when either mains power between VAC or DC power between VDC is available. - AC power cords to suit most world power outlets - DC power lead that has clips and adaptors to plug into either a vehicle cigarette outlet, vehicle power outlet or 12 V battery Barrett Communications Commercial Catalogue 76 of 117

81 Accessories Commercial Catalogue Rapid deployment solar panel - colour black BCA C kg Solar power supply pack for charging and operating the manpack transceiver. - Compact lightweight tactical foldout solar panel Amps normal - Folds to 37cm x 22cm x 4cm package with lead and plug to suit manpack or external battery management unit - Solar panel bag - colour black P/N BCA Rapid deployment hand crank generator N/A 8.25 kg For charging and operating the manpack transceiver. - Compact hand crank generator with fold out operator s seat 24 3 Amps peak with lead and plug to suit manpack or external battery management unit GPS receiver / antenna module (ESU) C kg Accessories Combined receiver / antenna to suit Enable the GPS receiver antenna to be placed up to 4 metres from the Used when the 2090 is deployed at a temporary base station or in a vehicle docking station allowing the ESU / GPS to be mounted or placed outside the enclosure or vehicle. Barrett Communications Commercial Catalogue 77 of 117

82 Accessories Commercial Catalogue Programming kit C kg PC Programming kit - to suit 2090 Manpack. - Software (operating manual included on the USB) P/N USB Serial cable to suit 2090 with DB25 and DB9 adaptors P/N SA USB to serial adaptor P/N BCA92318 Display / handset extender interface BCA C kg Enables the display and handset to be extended up to 30 metres from the transceiver. The 1.5 metres standard display / handset extender cable is used when the display is carried on front webbing and the 15 metres extender cable is used for remote operation. Display / handset extender cable 1.5 metres C kg Accessories Cable that connects the web worn display and handset when removed from the PRC-2090 in a manpack configuration. Display / handset extender cable 15 metres C kg Enables the display and handset to be extended 15 metres from the PRC-2090, used when PRC-2090 is deployed in temporary operations centre when it is desirable to have the PRC located outside the operations centre near its antennas. Up to two cables can be daisy chained to achieve 30 metres separation between the PRC-2090 and the operator with the display and handset. Barrett Communications Commercial Catalogue 78 of 117

83 High power transmitters/ receivers

84

85 Commercial Catalogue 2075 HF High power transmitters package W BC N/A 258 kg Power output can be set to between 500 W and 1 KW. Note:- High power transmitters require high quality earthing systems and it is recommended that lightning arrestor kits P/N BCA are used on RF coaxial feeders. Details of required earthing systems are available from our Technical Services Department and are supplied in the operation and installation manual HF High power transmitters W package 2075 HF high power transmitters Linear amplifier Linear power supply SA SA Mains power supply BC Rack mount insert with mic, speaker and rack mount kit front panel combined BCA RU Linear interface SA Rack mounting kit to suit 2050 Transceiver and 2022 Power supply In rack power reticulation Blower fan assembly BCA20007 BCA BCA HF Transceiver / exciter with high duty cycle fan heat sink fitted BC RU Floor mounting rack cabinet with all required blanking panels Barrett 2075 Operation and installation manual BCA BCM20750 Barrett Communications Commercial Catalogue 81 of 117

86 2075 HF high power transmitters Commercial Catalogue 2075 HF High power transmitters package W BC N/A 172 kg Note:- High power transmitters require high quality earthing systems and it is recommended that lightning arrestor kits P/N BCA are used on RF coaxial feeders. Details of required earthing systems are available from our Technical Services Department and are supplied in the operation and installation manual HF High power transmitters W package Linear amplifier Linear power supply SA SA Mains power supply BC Rack mount insert with mic, speaker and rack mount kit front panel combined BCA RU Linear interface SA Rack mounting kit to suit 2050 Transceiver and 2022 Power supply In rack power reticulation Blower fan assembly BCA20007 BCA BCA HF Transceiver / exciter with high duty cycle fan heat sink fitted BC RU Desk mounting rack cabinet with all required blanking panels Barrett 2075 Operation and installation manual BCA BCM20750 Barrett Communications Commercial Catalogue 82 of 117

87 Commercial Catalogue 1 kw Automatic antenna tuner BC N/A 100 kg 2 to 30 MHz with memory tune function. Suit whips and long wire antennas. Note:- This antenna tuner requires an extensive earth plane system for correct operation with short antennas and whips (refer to manual or Barrett Communications Technical Services Department for details). - RF and control cables to be purchased separately (Require length of the cables need to be specified by customer) 1 kw Automatic antenna tuner 1 kw automatic antenna tuner Opto coupled waterproof interface - interfaces to 2075 Linear interface Installation and operation manual BCA BCM Linear interface with ATU SA C kg 19 Rack mount 2 RU unit. Provides an interface between a 2050 Exciter and a 2075 Linear amplifier. In addition, it contains an interface to a 1 kw Automatic antenna tuner BC207510, allowing impedance matching of antennas. - Connection to 2050 Transceiver - Connection to 2075 Linear amplifier - Connection to 1 kw Automatic antenna tuner Barrett Communications Commercial Catalogue 83 of 117

88 This page intentionally left blank Barrett Communications Commercial Catalogue 84 of 117

89 Turnkey systems

90

91 Commercial Catalogue Barrett W PEP continuous FEC duty cycle HF Transceiver BC C kg Note:- If mounted in a rack cabinet this transceiver / exciter requires a 2U front ventilated blanking panel to be mounted above a 2U rack kit in which the transceiver is mounted. 125 W PEP continuous FEC HF Transceiver Turnkey system components BCA20010 BCA20015 BC BCA20006 BCM20500 Hand microphone with channel up/down buttons Loudspeaker DC power cable and connector - 6 metres Barrett 2050 Operation and installation manual BCA20010 BCA20015 BCA20006 BCM20500 Barrett Communications Commercial Catalogue 87 of 117

92 Turnkey system components Commercial Catalogue High duty cycle fan heat sink unit - factory fit only BCA20056 C kg For Barrett W PEP continuous FEC duty cycle HF Transceiver. Turnkey system components Barrett Communications Commercial Catalogue 88 of 117

93 Commercial Catalogue 2076 Remote site controller - local BC C kg Features:- 19 rack mount 2RU unit. Universal remote control device to be used either as stand alone or in conjunction with one or two 2076 Remote site controller units - remote, to provide full function remote control of Barrett 2050 radios in various split-site configurations. - Connection for two 2050 radio front panels - Auxiliary connection for peripheral equipment i.e. HF Data Modem or phone patch - Two connections for cross site connection to remote units in split site configuration - Connection for voice reducing of Tx & Rx audio - Connection for I/O telemetery Turnkey system components Turnkey system components 2076 Remote site controller - remote BC C kg Features:- 19 rack mount 2RU unit. To be used in split site configurations, operating in conjunction with the 2076 Remote site controller - Local. In a 3 way split site, one 2076 Remote site controller - remote, is required at each remoted radio site. - Connection for cross site connection to local unit - Connection for 2050 radio (where remote control) - Connection for I/O telemetery AC power reticulation system BCA C2 3.2 kg Features:- 19 rack mount 2RU unit. Provides mains isolation and over-current trip protected outputs for mains distribution in equipment racks. - Mains isolation switch - rating 16 A - 2 Over current trip switches - rating 5 A kettle plug output 3 way - 1 Over current trip switches - rating 15 A circular Military plug output - 7 metres of 2.5 mm heavy duty flex, mains input cable directly terminated into unit Barrett Communications Commercial Catalogue 89 of 117

94 Turnkey system components Commercial Catalogue 20U desk mount 19 rack - colour black BCA N/A 4.0 kg 20U desk mounted 19 rack, with back door. Turnkey system components 39U floor mount 19" rack - colour black BCA N/A 6.0 kg 39U desk mounted 19 rack, with back door. 4U table top rack mounting cabinet BCA90042 N/A 2.0 kg Our standard range of small 19 cabinets are 450mm deep and suitable for remote control table top applications and small equipment cabinet requirements. Optional front and rear doors if required. Barrett Communications Commercial Catalogue 90 of 117

95 Commercial Catalogue 6U table top rack mounting cabinet BCA90043 N/A 2.2 kg Our standard range of small 19 cabinets are 450mm deep and suitable for remote control table top applications and small equipment cabinet requirements. Optional front and rear doors if required. Turnkey system components Turnkey system components 8U table top rack mounting cabinet BCA90044 N/A 2.4 kg Our standard range of small 19 cabinets are 450mm deep and suitable for remote control table top applications and small equipment cabinet requirements. Optional front and rear doors if required. Profile A Console BCA N/A 4.0 kg Suitable for operator positions and remote control equipment, the Profile A Console presents 12RU (535mm) of usable height in the viewing area, and up to 10RU (445mm) below the desk, with a standard 19 mounting width. Available in the following colours: APO Grey Ripple P/# IBM Blue Ripple P/# Light Grey Ripple P/# Gypsy Beige Ripple P/# Charcoal Grey Ripple P/# Sable Black TX P/# Profile B Console BCA N/A 4.0 kg This console matches the Profile A console and is suited for a desk top PC etc. Available in the following colours: APO Grey Ripple P/# IBM Blue Ripple P/# Light Grey Ripple P/# Gypsy Beige Ripple P/# Charcoal Grey Ripple P/# Sable Black TX P/# Barrett Communications Commercial Catalogue 91 of 117

96 Turnkey system components Commercial Catalogue PTT Footswitch BCA C4 0.6 kg PTT footswitch suitable for operator console foot activated PTT applications. Turnkey system components Rack mounting kit BCA20007 C kg Enables 19 rack mounting of 2000 Series transceivers, power supplies, modems and multi coupler units - fits two 2000 Series units with two front panels, one 2000 Series unit with one blanked position or one 2050 Transceiver with a speaker and microphone panel. Rack mount insert with mic and speaker - suits 19 rack mount kit BCA C kg Fits in one 2RU equipment front panel position in 19 rack mount kit, provides panel mounted socket and clip for a microphone and speaker for 2000 Series transceivers or 2060 Telephone interconnect. Barrett Communications Commercial Catalogue 92 of 117

97 Commercial Catalogue Rack mount kit - front panel only BCA N/A 0.22 kg 2RU 19 front panel of rack mount kit used to mount remote control heads and rack mount insert with speaker and mic (BCA207624). Turnkey system components Turnkey system components Rack mount insert with mic, speaker and rack mount kit front panel combined BCA N/A 1.20 kg 2RU 19 front panel of rack mount kit and rack mount insert with speaker and mic. 1U 19 rack blanking panel - colour black BCA N/A 0.15 kg Powder coated 1U blank 19 rack panel. Barrett Communications Commercial Catalogue 93 of 117

98 Turnkey system components Commercial Catalogue 2U 19 rack blanking panel - colour black BCA N/A 0.25 kg Powder coated 2U blank 19 rack panel. Turnkey system components Modem shelf to suit 39U and 20U rack BCA N/A 1.90 kg 19 shelf to suit modems or other freestanding equipment to be mounted in racks. Barrett Communications Commercial Catalogue 94 of 117