BCPM2000/23. Tactical Catalogue

Transcription

1 BCPM2000/23

2 Contents Pages HF Tactical packages 1-3 HF Tactical transceiver 4 HF Security and calling options 5-8 HF Data options 9-11 HF Power options HF Antenna options HF General options VHF Tactical packages VHF Tactical transceiver 36 VHF Security and calling options VHF Data options 39 VHF Power options VHF Antenna options VHF General options Interoperability 53 Maintenance Manuals and brochures Training Note:- 1. Specifications are typical. Equipment descriptions and specifications are subject to change without notice or obligation 2. For complete technical specifications please refer to your business development manager 3. weights provided are indicative and are subject to variation, they are provided as guide for operational use of products only. Packed weight will be determined based on orders once received and as such are not indicated in this catalogue.

3 HF Tactical packages PRC-2090 HF Tactical manpack package C1 & C kg Standard features: channels with frequency range 1.6 to 30 MHz - Power output W PEP, power input 22 VDC nominal - Software defined core & DSP - Digital Selective Calling & Telcall - 4 & 6 digit - GPS & RS232 interface - Meets MIL-STD 810G for shock, temperature, vibration, dust and immersible to 1 m for 1 hr HF Tactical packages Optional Features*:- - ECCM Options (COMSEC/TRANSEC) - MILSTD B ALE (JITC certified) - Internal fit high speed modem * For additional options and accessories, please see relevant section detail. Note :- See brochure for more detailed information. ogramming kit PRC-2090 HF Tactical transceiver Advanced tactical handset Battery pack 10 Ah Collapsible whip 3 metres with gooseneck Counterpoise earth kit - single wire Long wire throw out antenna Whip adaptor to suit Display / handset extender interface Display / handset extender cable 1.5 metres Universal AC/DC adaptor Backpack for manpack - colour Multicam Barrett PRC-2090 operation and installation manual Barrett Communications Page 1

4 HF Tactical packages PRC-2091 HF Tactical mobile package C kg HF Tactical packages Standard features: channels with frequency range 1.6 to 30 MHz - Power output W PEP, power input 13.8 VDC nominal - Software defined core & DSP - Digital Selective Calling & Telcall - 4 & 6 digit - GPS & RS232 interface - Meets MIL-STD 810G for shock, temperature, vibration & dust Optional Features*:- - ECCM Options (COMSEC/TRANSEC) - MILSTD B ALE (JITC certified) - Internal fit high speed modem * For additional options and accessories, please see relevant section detail Note :- See brochure for more detailed information. - Suitable antenna to be ordered separately. ogramming kit PRC-2090 HF Tactical transceiver Advanced tactical handset Vehicle docking station DC power cable and connector Rugged external mount speaker External speaker cable to 2090 VDS Speaker mounting bracket Handset mounting bracket Mass matched vibration mounting platform Tactical installation kit Barrett PRC-2090 operation and installation manual Barrett Communications Page 2

5 HF Tactical packages PRC-2092 HF Tactical base package C kg Standard features: channels with frequency range 1.6 to 30 MHz - Power output W PEP, power input 13.8 VDC nominal - Software defined core & DSP - Digital Selective Calling & Telcall - 4 & 6 digit - GPS & RS232 interface - Meets MIL-STD 810G for shock, temperature, vibration & dust Optional Features*:- - ECCM Options (COMSEC/TRANSEC) - MILSTD B ALE (JITC certified) - Internal fit high speed modem HF Tactical packages * For additional options and accessories, please see relevant section detail Note :- See brochure for more detailed information. - Suitable antenna to be ordered separately. ogramming kit PRC-2090 HF Tactical transceiver Advanced tactical handset Vehicle docking station AC Power supply module with complete set AC power cables to connect to all international supplies Handset mounting bracket Rugged external mount speaker External speaker cable to 2090 VDS Speaker mounting bracket Barrett PRC-2090 operation and installation manual Barrett Communications Page 3

6 HF Tactical transceiver PRC-2090 HF Tactical transceiver C1 4.8 kg HF Tactical transceiver Standard features: channels with frequency range 1.6 to 30 MHz - Power output W PEP, power input 22 VDC nominal - Software defined core & DSP - Digital Selective Calling & Telcall - 4 & 6 digit - GPS & RS232 interface - Meets MIL-STD 810G for shock, temperature, vibration, dust and immersible to 1 m for 1 hr Optional Features*:- - ECCM Options (COMSEC/TRANSEC) - MILSTD B ALE (JITC certified) - Internal fit high speed modem * For additional options and accessories, please see relevant section detail. Note :- See brochure for more detailed information. - Excludes all accessories not shown Advanced tactical handset Barrett PRC-2090 operation and installation manual Barrett Communications Page 4

7 HF Security and calling options Programming kit x x x C4 0.2 kg Microsoft Windows compatible (Windows XP or later) programming software package to suit all PRC-2090 s. - Software (operating manual included on the USB) P/N USB Serial cable to suit PRC-2090 with DB9 adaptors P/N SA USB to serial adaptor P/N BCA92318Programming kit FED-STD 1045 / MIL-STD B Automatic link establishment (ALE) x x x N/A N/A HF Security and calling options Capability includes NET call, ALL call, Any call, Group call, Wildcard call, ALE beacon and in-link AMD messaging, 20 networks and 500 available channels - JITC certified. Note:- When using ALE at least one ALE fill program is required by the system administrator to set up the ALE network - this fill program is included in the 2090 programming kit P/N Internal Fit Secure Call x x x N/A N/A A point to point or point to multipoint Secure Call system initiated by the entry of a scramble key and the transmission of a Secure Call Selcall. Internal Fit Barrett Communications Page 5

8 HF Security and calling options HF Security and calling options Frequency hopping (export license required) x x x N/A N/A 25 or 5 hops per second - no central synchronisation station, no net entry delay or late entry delay. Note:- ESU / GPS to be purchased separately. This option requires an Australian Department of Defence Export Licence. Internal Fit Secure digital voice auto vocoder 700/1200/2400 with DES 56 encryption x x x BCO20521 N/A N/A Note:- This option requires key management and keyfill software P/N Internal Fit Secure digital voice Low rate auto vocoder 600/1200/2400 with AES256 encryption Note:- This option requires key management and keyfill software P/N Note:- This option requires an Australian Government Export Licence. Note:- Factory fit only x x x BCO20520 N/A N/A Internal Fit Barrett Communications Page 6

9 HF Security and calling options Key management and keyfill software (AES 256 and DES 56) x x x N/A N/A For secure digital voice Low rate auto vocoder 600/1200/2400 with AES 256 encryption and secure digital voice auto vocoder 700/1200/2400 with DES 56 encryption. - Scrambler key injection software P/N BCUSB Serial cable to suit PRC-2090 with DB9 adaptors P/N SA USB to serial adaptor P/N BCA92318 Voice scrambler FFT x x x N/A N/A HF Security and calling options Enables the PRC-2090 to operate in FFT based voice scrambler mode. Internal Fit Note:- Software and cables are not included. Please see key injection kit Programming kit Voice encryption DES 56 x x x N/A N/A Enables the PRC-2090 to operate in DES 56 (Data Encryption Standard) mode with fall back analogue FFT scrambler for use on extremely bad HF channels. Internal Fit Note:- Software and cables are not included. Please see key injection kit Barrett Communications Page 7

10 HF Security and calling options HF Security and calling options Voice encryption AES 256 x x x N/A N/A Enables the PRC-2090 to operate in AES 256 (Advanced Encryption Standard) mode with fall back analogue FFT scrambler for use on extremely bad HF channels. Note:- Software and cables are not included. Please see key injection kit Note:- This option requires an Australian Department of Defence Export Licence. Internal Fit Key injection kit for voice encryption AES 256/ DES 56/ FFT x x x C4 0.2 kg - Scrambler key injection software P/N BCUSB Serial cable to suit PRC-2090 with DB9 adaptors P/N SA USB to serial adaptor P/N BCA92318 Barrett Communications Page 8

11 PRC-2090 HF Manpack data configuration Clover 2000 internal modem with Internet and fax gateway sofware PRC-2090 P/N Operates with the supplied Barrett 2020 HF data system software providing full facilities and connection to the internet and international fax system. - Internal fit modem PCB - Serial cable with DB9 adaptor - USB to serial adaptor - Barrett 2020 HF and fax gateway software Internal Fit Ethernet Lan Internet HF Data options MIL-STD internal modem with RC-50B stack based communications suit PRC-2090 P/N Wave forms include STANAG 4285, 4415, 4481, 4529, 4539 MIL-STD A-5.3, MIL-STD B, MIL-STD B APPENDIX C - Internal fit modem PCB P/N RC-50B based communications suit - Serial cable with DB9 adaptor - USB to serial adaptor Internal Fit Ethernet Lan Internet Clover 2000 external modem with USB interface and internet and fax gateway software P/N Clover 2000 external modem powered by USB interface from connected RPT5 (not included) running the communications suit software. - Cable to suit PRC Cable modem to USB - Instruction Manual - Barrett 2020 HF and fax gateway software Ethernet Lan Internet Barrett Communications Page 9

12 HF Data options Clover 2000 internal modem with internet and fax gateway software x x x C4 0.4 kg HF Data options Operates with the supplied Barrett 2020 HF data system software providing full facilities and connection to the Internet and international fax system. - Internal fit modem PCB P/N BC Serial cable with 15 pin MIL-STD connectors and DB9 adaptors P/N SA Barrett 2020 HF and fax gateway software P/N USB USB to serial adaptor P/N BCA92318 Internal Fit Clover 2000 external modem with USB interface & internet & fax gateway x x x C kg Clover 2000 external modem powered by USB interface from connected ruggedised laptop (not included) running the communications suite software. - Cable to suit PRC Cable modem to USB - Cable modem earth strap P/N SA Instruction manual - Barrett 2020 HF and fax gateway software P/N USB ro Barrett Communications Page 10

13 HF Data options Clover 2000 external modem mount x x x C6 0.7 kg Allows mounting of modem to PRC-2090 VDS in various configurations. HF Data options MIL-STD internal modem with RC-50B 5066 stack based communications suite x C4 0.4 kg Wave forms:- STANAG 4285, 4415, 4481, 4529, 4539 MIL-STD A-5.3, MIL-STD B, MIL-STD B APPENDIX C Internal Fit - Internal fit modem PCB P/N RC-50B 5066 based communications suit - Serial cable to suit PRC-2090 with DB9 adaptors P/N SA USB to serial adaptor P/N BCA92318 MIL-STD external modem with RC-66B based communications suite x C6 1.7 kg Wave forms:- STANAG 4285, 4415, 4481, 4529, 4539 MIL-STD A-5.3, MIL-STD B, MIL-STD B APPENDIX C - RC-66B combat communications suite software Barrett Communications Page 11

14 PRC-2090 HF Manpack power configurations HF Power options Battery pack 10 Ah P/N Battery cartridge - Colour matt black Tactical solar panel P/N PRC 2090 Tactical Solar power supply pack - For charging and operating the PRC-2090 manpack Includes :- - Compact lightweight tactical foldout solar panel Amps normal, folds to 37 cm x 22 cm x 4 cm package, with lead - Solar panel bag - Multicam P/N Universal AC/DC adaptor P/N PRC 2090 Universal AC/DC power adaptor - For charging and operating the manpack transceiver when either mains power between VAC or DC power between VDC is available Includes :- - AC power cords to suit most world power outlets Tactical hand crank generator P/N PRC 2090 Hand crank generator For charging and operating the manpack transceiver Includes :- - Compact hand crank generator with fold out operator seat 24 3 Amps peak with lead and plug to suit 2090 manpack - DC power lead that has clips and adaptors to plug into either a vehicle cigarette outlet, vehicle power outlet or 12 V battery Barrett Communications Page 12

15 HF Power options Universal AC/DC adaptor x C6 1.8 kg Universal AC/DC power adaptor - for charging and operating the manpack transceiver when either mains power between 100 to 254 VAC or DC power between 11 to18 VDC is available. - AC power cords to suit most world power outlets - DC power lead that has clips and adaptors to plug into either a vehicle cigarette outlet, vehicle power outlet or 12 V batteryogramming kit HF Power options Rapid deployment solar panel - colour Multicam x C6 1.3 kg Solar power supply pack - for charging and operating the manpack transceiver. - Compact lightweight tactical foldout solar panel Amps normal - Folds to 37 cm x 22 cm x 4 cm package, with lead and plug to suit manpack - Solar panel bag - colour Multicam P/N Battery pack 10 Ah x C kg Battery cartridge suitable for PRC-2090 manpack V 10 Ah Lithium Ion - colour matt black Barrett Communications Page 13

16 HF Power options Rapid deployment hand crank generator x N/A 8.25 kg HF Power options Hand crank generator - for charging and operating the manpack transceiver. - Compact hand crank generator with fold out operator s seat Amps peak with lead and plug to suit PRC-2090, PRC-2080 and PRC Carry bag - colour black 24 V to 12 V converter module suit vehicle docking station x C kg Provides for 24 V operation of the PRC-2090 when deployed in the vehicle docking station. The module attaches to fixture points on the top rear of the vehicle docking station. - Power cable and MIL-STD connectors to connect between the converter module and the docking station P/N Power cable and MIL-STD connector for 24 VDC input P/N AC Power supply module VDC x C1 6 kg AC mains power supply module VAC universal input. With connections for optional back up battery. - Battery backup cable and connector P/N AC Power supply cable set to suit all international supplies P/N SA Side plate to attach AC Power supply module to the docking station P/N Power cable and MIL-STD connectors to connect between the AC Power supply module and the docking station P/N Barrett Communications Page 14

17 PRC-2090 HF Manpack Antenna configurations HF Antenna options 5 Barrett Communications Page 15

18 HF Antenna options Rapid deployment wire dipole antenna W x C6 2.1 kg HF Antenna options Operates from 2 to 30 MHz W PEP max. Frequency markers attached to Kevlar radiators. - Lanyards wound on reusable spools with throw and securing weights - 10 metres of RG-58AU coaxial cable, with waterproof BNC and UHF coaxial connectors - Carry bag - colour black Rapid deployment broadband dipole antenna W x C kg Operates from 2 to 30 MHz without adjustment W PEP max. Can be deployed as full length broadband dipole or in compact form. Manufactured with Kevlar radiators and UV resistant Dacron cords. - Radiators and loads wound on reusable spools - Lanyards wound on reusable spools with throw and securing weights - 10 metres of RG-58AU coaxial cable, with waterproof BNC and UHF coaxial connectors - Carry bag - colour black Rapid deployment mast x C kg Portable 5 metres mast kit for tactical broadbands and dipoles - rapid deployment. - 7 pieces mast - Guys on winders, earth pegs, guy pegs and hammer - Carry bag - colour black Note:- Not recommended for use with base station antennas. Tape whip metres x C kg For manpack operation in receive mode. (for transmission from 5 to 30 MHz but at limited efficiency). Barrett Communications Page 16

19 HF Antenna options Long wire throw out antenna x C4 0.4 kg For manpack operation with an adaptor to suit the whip stud on PRC Winding hub, antenna wire and throw weight - Carry bag - colour black Collapsible whip 3 metres with gooseneck x C6 0.4 kg For manpack operation with gooseneck - colour black. HF Antenna options Counterpoise earth kit - multi-wire x C kg Recommended to increase the efficiency of the PRC-2090 operating with whip antennas below 3 MHz when in dry soil or desert areas where normal earth connections are difficult to achieve. - Winding hub, wire earth radials and weights Counterpoise earth kit - single wire x C4 0.2 kg Recommended to increase the efficiency of the PRC-2090 operating with whip antennas below 3 MHz. - Winding hub, wire earth radial and peg Whip adaptor to suit 2090 x C kg Complete whip adaptor to fit 2090 manpack. Barrett Communications Page 17

20 HF Antenna options Barrett 2019 MIL-SPEC ATU HF mobile antenna - NATO green x C5 5.5 kg HF Antenna options Features:- - Frequency range 2 to 30 MHz - Fast tuning - typically less than 2 seconds - Extremely robust technical plastic alloy radome - Two piece MIL-SPEC whip and spring - Immersible to 1 metre for 1 hour - Meets MIL-STD 810G for shock, temperature, vibration and dust Note :- See brochure for more detailed information BCM Barrett 2019 antenna - size 2440 mm with fibreglass whip Interface cable 6 m - integral coaxial/control with connectors to suit vehicle docking station Fibreglass split whip top section and bottom section - Length 1610 mm Tapered spring - black Installation manual BCM Stainless steel whip x T4 0.4 kg Single section stainless steel whip for the Barrett 2019 automatic tuning mobile antenna for NVIS operation. Length 2080 mm. NVIS whips extension to suit Barrett 2019 ATU antenna x T4 0.6 kg Two whip sections complete with tie down harness to extend the whip on the Barrett 2019 automatic tuning mobile antenna for NVIS operation. The usable frequencies for NVIS communications are between 2 MHz and 15 MHz. Length 1610 mm. Barrett Communications Page 18

21 HF Antenna options Barrett 4011 MIL-SPEC ATU with mobile whip and base package x C kg Features:- Frequency Range: 2-30MHz tuneable Power Rating: 150 Watts PEP Polarisation: Vertical Memory tune in <130ms, Non-Memory tune in <1 sec ALE compatible Frequency-hopping compatible MIL-STD-810F Waterproof,Vibration, and Dust Base Mounting: NATO 6 or 3 hole pattern / USA 4 hole pattern HF Antenna options Barrett 4011 MIL-SPEC ATU Interface cable 6 m - integral coaxial/control with connectors to suit vehicle docking station Military HF antenna base Military HF 2-30 MHz fibreglass whip antenna - Length 3000 mm Antenna mounting bracket Installation manual BCM Barrett 4011 MIL-SPEC ATU x C2 3.2 kg Features:- Frequency Range: 2-30MHz tuneable Power Rating: 150 Watts PEP Memory tune in <130ms, Non-Memory tune in <1 sec ALE compatible Frequency-hopping compatible MIL-STD-810F Waterproof,Vibration, and Dust Note :- See brochure for more detailed information. Barrett Communications Page 19

22 HF Antenna options Anti-Vibration mount for 4011 x C6 1.0 kg HF Antenna options For mounting a Barrett 4011 MIL-SPEC ATU into an armoured or other shock heavy vehicle Rapid deployment wire dipole antenna W PEP x x C kg Operates from 2 to 30 MHz with frequency labels to indicate tuned length. Manufactured with Kevlar radiators and UV resistant Dacron cords. - Throw Cord and securing weight wound on reusable spools - Carry bag - colour black - 20 metres of RG-58AU coaxial cable, waterproof C32-21 UHF type coaxial connector Rapid deployment broadband dipole antenna W PEP x x C6 2 kg Operates from 2 to 30 MHz without adjustment W PEP max. Can be deployed as full length broadband dipole or in compact form. Manufactured with Kevlar radiators and UV resistant Dacron cords. - Throw Cord and securing weight wound on reusable spools - Carry bag - colour black - 20 metres of RG-58AU coaxial cable, waterproof C32-21 UHF type coaxial connector Rapid deployment two wire broadband dipole antenna W PEP x x C2 3.2 kg Operates from 2 to 30 MHz without adjustment 125W PEP max. Provides omnidirectional coverage with strong near vertical radiation for NVIS communications and also good signal strength at lower angles for medium and longer range communications. Rugged construction is rugged with Kevlar radiator wires and robust extruded-alloy balun housing. - Throw Cord and securing weight wound on reusable spool - Carry bag - colour black - 20 metres of RG-58AU coaxial cable, waterproof C32-21 UHF type coaxial connector - UHF-BNC adaptor Note:- Minimum recommended install height is 6 metres. Barrett Communications Page 20

23 HF Antenna options Tactical HF ATU base antenna x x C5 & T5 7 kg The Barrett 4017 is a compact base antenna solution for installations in areas with space limitations where normal wire broadband antennas are not practical. Full Coverage from 2~30MHz. Omni directional Radiation, Can be installed on wide range of masts & poles Recommended height 6 ~ 10 metres Max installed length 5.7 metres Compact packaging for Air Shipment - 30 metres of integral RF control cable and connectors P/N HF Antenna options Note:- See brochure for more detailed information 912 Multi-wire broadband dipole (2 to 30 MHz) W PEP stainless steel x x N/A N/A 27 metres stanless steel, fibreglass spreaders and encapsulated baluns and loads metres of RG-58AU coaxial cable with waterproof C32-21 type UHF coaxial connectors. Note:- Masts supplied separately. 10 metres air transportable aluminium mast - nylon guys x x N/A N/A Suitable for rapid deployment of Barrett 912 broadband antennas or Barrett 915 series wire dipole. With Nylon guys and ground mounting. Packed length 2 metres, suitable for air-freight. - Offset bracket and pulleys - Nylon guys, guy anchor pegs, pulleys and halyard - Installation instructions Barrett Communications Page 21

24 HF Antenna options Internal fit GPS receiver for 2019 antenna x N/A N/A HF Antenna options GPS receiver fitted inside the 2019 antenna, interfaces to the 2090 docking station via the RF control cable supplied with 2019 antennas. Antenna mounting bracket x C6 3.3 kg Mounting bracket for mobile whip antenna or 2019 antenna. Internal Fit 2018 Mobile magnetic loop HF antenna x N/A N/A Ideal for NVIS propagation or applications requiring constant coverage for distances of km, the loop antenna provides significantly more gain than conventional whip antenna systems. Features:- - Frequency range 3.9 to 12.5 MHz - Fast tuning - typically less than 2 seconds - Meets MIL-STD 810G for shock, temperature, vibration and dust - Packed size 2000 mm x 1300 mm x 200 mm Note :- See brochure for more detailed information BCM metres Interface cable and coaxial cable Operation and installation manual BCM Barrett Communications Page 22

25 HF General options GPS receiver / antenna module (ESU) x x x C kg Combined receiver / antenna to suit PRC-2090, PRC-2091 and PRC Enable the GPS receiver antenna to be placed up to 4 metres from the PRC Used when the PRC-2090 is deployed at a temporary base station or in a vehicle docking station allowing the GPS to be placed outside the enclosure or vehicle. Advanced tactical handset x x x C4 0.4 kg HF General options Advanced tactical handset with waterproof speaker, microphone, Press-To-Talk (PTT) button and backlit control keypad for use with advanced software features such as Selcall, Groupcall, key entry and front panel programming. Display / handset extender cable 1.5 metres x x x C4 0.1 kg Enables the display and handset to be extended 1.5 metres from the PRC-2090 CW key - lightweight tactical - with leg strap x x x C4 0.4 kg Lightweight brass CW key with leg strap and MIL-STD 6 pin connector. Barrett Communications Page 23

26 HF General options Display / handset extender interface x x x C kg HF General options Enables the display and handset to be extended up to 30 metres from the Transceiver. The 1.5 metre standard display / handset extender cable is used when the display is carried on front webbing and the 15 metre extender cable is used for remote operation. Display / handset extender cable 15 metres x x x C kg Enables the display and handset to be extended 15 metres from the PRC-2090, used when PRC-2090 is deployed in temporary operations centre when it is desirable to have the PRC-2090 located outside the operations centre near its antennas. Up to two cables can be daisy chained to achieve 30 metre separation between the PRC-2090 and the operator with the display and handset. Headphones x N/A 0.3 kg Black lightweight tactical with MIL-STD 15 pin connector. Waterproof speaker / microphone x C kg Speaker / microphone for 2090 manpack with MIL-STD 15 pin connector. Barrett Communications Page 24

27 HF General options Backpack for manpack - colour Multicam x C2 2.3 kg The full pack provides for the PRC-2090 and various accessories including wire antennas and spare battery packs. A pouch is provided to hold the PRC-2090 s removable display and handset. The side packs can be detached from pack to make the pack more compact. Note:- Solar panel bag not included. See Rapid deploy solar panel P/N HF General options Mass matched vibration mounting platform for Land application x C6 1.5 kg Attaches to PRC-2090 vehicle docking station/ PRC-2090 power supply to provide vibration isolation for the PRC-2090 when mounted in heavy or tracked vehicles. Removable display vehicle mounting bracket x x C4 0.3 kg Allows the user to mount the display unit separate from the transceiver. Barrett Communications Page 25

28 HF General options Rugged external mount speaker x x C4 0.6 kg HF General options External mount speaker for the PRC-2090 manpack transceiver when used in temporary field camps. Note:- Cable part number is required to connect the speaker to the PRC Speaker mounting bracket x x C kg Speaker bracket for mounting the rugged external speaker to the vehicle docking station. External speaker cable to 2090 VDS x x C kg Cable to connect the rugged external mount speaker to the VDS. Handset mounting bracket x x C kg Bracket to mount handset to the vehicle docking station. Vehicle docking station x x C kg Increases the output of the PRC-2090 tactical transceiver, when docked to 125 W PEP (voice). - 6 metres DC power cable with connector P/N The handset bracket and speaker bracket. Barrett Communications Page 26

29 HF General options Barrett 977 vehicle tracking system for 1-10 mobiles x x C kg vehicle tracking software on CD and USB Dongle vehicle tracking operators manual P/N BCM Programming cable P/N SA USB to serial adaptor P/N BCA92318 Barrett 977 vehicle tracking system for 1-25 mobiles x x C kg HF General options vehicle tracking software on CD and USB Dongle vehicle tracking operators manual P/N BCM Programming cable P/N SA USB to serial adaptor P/N BCA92318 Barrett 977 vehicle tracking system for 1-50 mobiles x x C kg vehicle tracking software on CD and USB Dongle vehicle tracking operators manual P/N BCM Programming cable P/N SA USB to serial adaptor P/N BCA92318 Barrett 977 vehicle tracking system for mobiles x x C kg vehicle tracking software on CD and USB Dongle vehicle tracking operators manual P/N BCM Programming cable P/N SA USB to serial adaptor P/N BCA92318 Barrett Communications Page 27

30 HF General options Halyard and pulley kit suit 912 broadband antennas x C kg HF General options - 2 off galvanised pulleys m of standard nylon halyard NVIS Kit for 912 x C4 0.4 kg To suit BC91200 multi-wire broadband dipole antenna. - Stainless steel vertical feeder - All fixing hardware - Installation manual Offset bracket and pulley x N/A 2.2 kg To facilitate mounting of 912 broadbands or 915 wire dipoles in an inverted V configuration on either 902 winch-up towers or 902 telescopic masts. Pulley to suit 4 mm halyard. Tactical installation kit x x C kg - Large selection of screws to accommodate most installations - Cable ties - Rubber amalgamation tape - Power cable lugs - Manual circuit breaker - Braided earth lead with lugs - 6 metres DC power cable and connector Barrett Communications Page 28

31 HF General options Lightning arrestor kit 400 W x T1 & C kg - 1 x Surge arrestor with PL259/UHF (female) connectors - 1 x 5 metres length of RG58 Coaxial cable with UHF (male) - 1 x Steel dolly - 1 x 3 metres earth braid - 1 x Brass cable clamp assembly - 1 x Copper plated steel earth rod HF General options Barrett Communications Page 29

32 This page intentionally left blank Barrett Communications Page 30

33 VHF Tactical packages PRC W VHF Tactical handheld package C kg Standard features: preset - 25 khz (2304 Channels) Hz tone squelch in legacy mode (AFF) (STANAG 4204, PRC-77 compatible) - Advanced module diagnostics & error conditions - Meets MIL-STD 810G for shock, temperature, vibration, dust and immersible to 1 m for 1 hr Optional features*:- - ECCM parameters - COMSEC - Encrypted fixed frequency - TRANSEC - Digital encryption, Frequency hopping, free channel search * For additional options and accessories, please see relevant section detail Note :- See brochure for more detailed information PRC VHF Transceiver Battery charger with adaptor and plate Rechargeable 6.5 Ah Li-Ion battery pack Tactical handset with keypad Webbing pouch - Multicam W Gooseneck Tape whip antenna Collapsible whip 1.8 metres Barrett PRC operation manual VHF Tactical packages Barrett Communications Page 31

34 VHF Tactical packages PRC W VHF Tactical manpack package C7 & C kg Standard features: preset - 25 khz (2304 Channels) Hz tone squelch in legacy mode (AFF) (STANAG 4204, PRC-77 compatible) - Advanced module diagnostics & error conditions - Meets MIL-STD 810G for shock, temperature, vibration, dust and immersible to 1 m for 1 hr Optional features*:- - ECCM parameters - COMSEC - Encrypted fixed frequency - TRANSEC - Digital encryption, Frequency hopping, free channel search * For additional options and accessories, please see relevant section detail Note :- See brochure for more detailed information. ogramming kit PRC VHF Transceiver VHF 25 Watt docking station Battery pack 14.4 V 10 Ah Li-Ion Universal AC/DC adaptor Collapsible whip 1.8 metres VHF Tactical packages Framed backpack - colour Multicam Tactical handset with keypad Barrett PRC operation manual Coax cable between transceiver and docking station W Gooseneck Tape whip antenna Barrett Communications Page 32

35 VHF Tactical packages PRC W VHF Tactical mobile package C kg Standard features: preset - 25 khz (2304 Channels) Hz tone squelch in legacy mode (AFF) (STANAG 4204, PRC-77 compatible) - Advanced module diagnostics & error conditions - Meets MIL-STD 810G for shock, temperature, vibration & dust Optional features*:- - ECCM parameters - COMSEC - Encrypted fixed frequency - TRANSEC - Digital encryption, Frequency hopping, free channel search * For additional options and accessories, please see relevant section detail. Note :- Suitable antenna to be ordered separately. See brochure for more detailed information PRC VHF Transceiver Vehicle docking station for docking of PRC Transceiver W VHF Amplifier Tactical handset with keypad VHF Speaker mounting bracket Coax cable between transceiver and VHF amplifier Interconnecting control cable 0.3m between 50 W VHF amplifier and vehicle docking station DC Power cable suit 50 W amplifier Tactical installation kit Barrett PRC operation manual Anti-vibration mount Rugged external mount speaker VHF Handset mounting bracket Cable speaker VHF Tactical packages Barrett Communications Page 33

36 VHF Tactical packages PRC W VHF Tactical base package SC kg Standard features: preset - 25 khz (2304 Channels) Hz tone squelch in legacy mode (AFF) (STANAG 4204, PRC-77 compatible) - Advanced module diagnostics & error conditions - Meets MIL-STD 810G for shock, temperature, vibration & dust Optional features*:- - ECCM parameters - COMSEC - Encrypted fixed frequency - TRANSEC - Digital encryption, Frequency hopping, free channel search * For additional options and accessories, please see relevant section detail. Note :- Suitable antenna to be ordered separately. See brochure for more detailed information PRC VHF Transceiver Vehicle docking station for docking of PRC Transceiver W VHF Amplifier Tactical handset with keypad VHF Tactical packages Rugged external mount speaker AC power supply module VDC Coax cable between transceiver and VHF amplifier Interconnecting control cable 0.3m between 50 W VHF amplifier and vehicle docking station Barrett PRC operation manual VHF Speaker mounting bracket VHF Handset mounting bracket Cable speaker to PRC Transceiver Vehicle docking station to power supply connecting cable Barrett Communications Page 34

37 VHF Tactical packages PRC W VHF Tactical re-broadcast system N/A 33.5 kg Standard features: preset - 25 khz (2304 Channels) Hz tone squelch in legacy mode (AFF) (STANAG 4204, PRC-77 compatible) - Advanced module diagnostics & error conditions Optional features*:- - ECCM parameters - COMSEC - Encrypted fixed frequency - TRANSEC - Digital encryption, Frequency hopping, free channel search * For additional options and accessories, please see relevant section detail SA Note :- Suitable antenna and power supply (if required) to be ordered separately. If fitted to a vehicle will require 2 x DC Power cable P/N See brochure for more detailed information SA PRC VHF Transceiver x Combined vehicle docking station for PRC Transceiver W VHF Amplifier x Tactical handset with keypad x Interconnecting control cable 0.3m between 50 W VHF amplifier and vehicle docking station x Coax cable 0.6 m BNC to BNC vehicle docking station to 50 W VHF amplifier x 2 SA Coax cable 0.55 m TNC to BNC vehicle docking station to 50 W VHF amplifier x 2 SA Bandpass filter panel Transportation casing Rugged external mount speaker x VHF Speaker mounting bracket x Cable speaker to PRC Transceiver x VHF Tactical packages Barrett PRC operation manual Barrett Communications Page 35

38 VHF Tactical transceiver PRC VHF Tactical transceiver C7 1.1 kg Standard features: preset - 25 khz (2304 Channels) Hz tone squelch in legacy mode (AFF) (STANAG 4204, PRC-77 compatible) - Advanced module diagnostics & error conditions - Meets MIL-STD 810G for shock, temperature, vibration, dust and immersible to 1 m for 1 hr Optional features*:- - ECCM parameters - COMSEC - Encrypted fixed frequency - TRANSEC - Digital encryption, Frequency hopping, free channel search * For additional options and accessories, please see relevant section detail. Note :- See brochure for more detailed information. PRC VHF Transceiver Barrett PRC operation manual VHF Tactical transceiver Barrett Communications Page 36

39 VHF Security and calling options Security options x x x x x N/A N/A Security options include:- Analogue Voice - Fixed Frequency (fitted as standard to all PRC s) Digital Unencrypted Data - Fixed Frequency (fitted as standard to all PRC s) Digital Encrypted Voice - Fixed Frequency (DEFF) Digital Encrypted Voice - Free Channel Search (DEFCS) Digital Encrypted Data - Fixed Frequency Internal Fit Frequency hopping options x x x x x N/A N/A Frequency hopping options include:- Analogue Voice - Fixed Frequency ( fitted as standard to all PRC s) Digital Unencrypted Data - Fixed Frequency (fitted as standard to all PRC s) Digital Encrypted Voice - Fixed Frequency (DEFF) Digital Encrypted Voice - Frequency Hopping (DEFH) Digital Encrypted Voice - Free Channel Search (DEFCS) Digital Encrypted Data - Fixed Frequency Digital Encrypted Data - Frequency Hopping Note:- This option requires an Australian Defence Export Licence. Internal Fit VHF Security and calling options Barrett Communications Page 37

40 VHF Security and calling options Programming software x x x x x C4 0.2 kg Microsoft Windows compatible (Windows XP or later) programming software package to suit all PRC s. - Programming cable P/N Installation software P/N BCUSB USB to serial adaptor P/N BCA USB to mini USB programming cable P/N Fill gun programming unit and programming software x x x x x C4 0.6 kg Fill gun programming unit to fill VHF Transceiver with programming data. Can be destroyed for security reasons in the field. - Bench programming unit, with USB connector P/N Programming software P/N BCUSB20801 VHF Security and calling options Fill gun x x x x x C4 0.1 kg Fill gun to fill VHF Transceiver with programming data. Can be destroyed for security reasons in the field. Barrett Communications Page 38

41 VHF Data options Messaging and data transfer software x x x x C4 0.2 kg Enables transmission of data between PRC VHF Transceivers. - USB messaging and data transfer software P/N Serial data cable P/N USB to serial adaptor P/N BCA92318 Cloning cable x x x x x C kg Allows cloning of channel settings between PRC s. Serial data cable x x x x x C4 0.1 kg Serial data cable to enable data operation. PRC Bench test / programming unit x x x x x C4 0.8 kg Bench mount unit used with programming software to program and test RF power output of PRC VHF Data options Barrett Communications Page 39

42 VHF Power options Li-Ion Battery charger/programming base x C4 0.6 kg For charging 6.5Ah Li-Ion battery pack and programming VHF Transceiver - AC Power supply cable set to suit all international supplies P/N SA Battery charger adaptor P/N Battery charger plate Rechargeable 6.5 Ah Li-Ion battery pack x C4 0.6 kg 6.5 Ah Li Ion rechargeable battery Multiway 6 pocket Li-Ion Battery charger/programming Base x C2 5.8 kg For charging multiple 6.5 Ah Li-Ion batteries and programming up to 4 x VHF Transceivers. Universal V AC input. DC 24V input - AC Power supply cable set to suit all international supplies P/N SA VHF Power options Note:- Battery backup cable ordered separately P/N Ah, 14.4 V Lithium Ion battery pack x C kg Battery cartridge - for PRC brigade radio V 10 Ah Lithium Ion battery Barrett Communications Page 40

43 VHF Power options Universal AC/DC adaptor x C7 1.8 kg Universal AC/DC power adaptor - for charging and operating the 25 W brigade radio when either mains power between 100 and 254 VAC or DC power between 11 and 18 VDC is available. - AC power cords to suit most world power outlets - DC power lead that has clips and adaptors to plug into either a vehicle cigarette lighter outlet, vehicle power outlet or 12 V battery DC Power cable x C kg DC Power Cable for dual battery charger with clips and adaptors to plug into either a vehicle cigarette lighter outlet, vehicle power outlet or 12 V battery. Rapid deployment solar panel - colour Multicam x C6 1.3 kg Solar power supply pack - for charging and operating the manpack transceiver. - Compact lightweight tactical foldout solar panel Amps normal - Folds to 37 cm x 22 cm x 4 cm package, with lead and plug to suit PRC-2090 and PRC Solar panel bag - colour Multicam P/N Rapid deployment hand crank generator x N/A 8.25 kg Hand crank generator - for charging and operating the manpack transceiver. - Compact hand crank generator with fold out operators seat Amps peak with lead and plug to suit PRC-2090 and PRC Carry bag - colour black VHF Power options Barrett Communications Page 41

44 VHF Power options AC Power supply module VDC x x C1 7.6 kg AC mains power supply module VAC universal input and 13.8 V output at 20 Amps. With connections for optional back up battery. - DC power cable to suit PRC W VHF base station P/N Side plate and bracket to attach to underside of the PRC W VHF base station P/N MW-55590, MW Battery backup cable and connector P/N AC supply cable set to suit and international supplies P/N SA Dual AC power supply module - 24 VDC x C1 6.9 kg Dual AC power supply module with VAC universal input, that mounts in the rear section of the re-broadcast unit rack system. Supplies 24 VDC to each transceiver in the re-broadcast unit and has a no-break battery float charging system for optional backup batteries. VHF Power options - Battery backup cable and connector P/N AC supply cable set to suit all international supplies P/N SA x DC power cables P/N Barrett Communications Page 42

45 VHF Antenna options Collapsible whip 1.8 metres x x C6 0.2 kg Collapsible 1.8 metres whip - colour black. Note:- Requires 5 W Gooseneck P/N or 25 W Gooseneck P/N to connect the whip antenna to the transceiver. Tape whip antenna 1 metre x x C6 0.2 kg 1 metre flexible whip antenna. Note:- Requires 5 W Gooseneck P/N or 25 W Gooseneck P/N to connect the whip antenna to the transceiver. 5 W Gooseneck x C kg 5 W Gooseneck for connecting collapsible whip antenna P/N or tape whip antenna P/N to the PRC W VHF Tactical transceiver. 25 W Gooseneck x C kg 25 W Gooseneck for connecting collapsible whip antenna P/N or tape whip antenna P/N to the PRC W VHF Tactical manpack. Tactical rapid deployment antenna with 20 metres RG-58 coaxial cable and connectors Field deployable broadband MHz antenna complete with 20 metres RG-58 coaxial cable, TNC adaptor and N-type connectors. x x x x x C4 1.8 kg VHF Antenna options Barrett Communications Page 43

46 VHF Antenna options Tactical rapid deployment antenna with 10 metres RG-58 coaxial cable and connectors x x x x x C4 1.6 kg Field deployable broadband MHz antenna complete with 10 metres RG-58 coaxial cable, TNC adaptor and N-type connectors. Military VHF MHz aluminium whip and base antenna x x x T4 + C kg Military VHF whip antenna. Military grade rugged aluminium anodized. Connected with spring loaded steel bayonet fixing. Deployed length 2.7 metres. - Military VHF whip antenna P/N Military VHF antenna base P/N metres coaxial cable P/N Military VHF MHz fibreglass whip and base antenna x x x T5 + C kg VHF Antenna options Military grade fibreglass whip antenna is a ruggedly, constructed VHF centre-fed whip antenna. Deployed length 3.45 metres. - Military VHF whip antenna P/N Military VHF antenna base P/N metres coaxial cable P/N Barrett Communications Page 44

47 VHF Antenna options RG-58 coaxial cable with N type connectors 20 metres x x C6 0.4 kg 20 metres of RG-58 coaxial cable with N type connectors. RG-213 coaxial cable with N type connectors 20 metres x x x C2 3.4 kg 20 metres Coaxial cable for connecting military VHF MHz whip antenna to PRC series. Antenna mounting bracket x C6 3.3 kg Mounting bracket for VHF mobile whip antenna. 30 to 108 MHz elevated wideband VHF antenna x x T5 2.9 kg Rugged broadband antenna designed for high performance in the VHF frequency range MHz. Used for tactical applications using a portable mast or, for base-station mounting on towers or other fixed platforms. 4.8 metres height, with 3.2 metres width, wind rating of 170 Kph and is NATO green. Note:- Requires 20 metres RG-58 coaxial cable P/N Recommended for temporary use only VHF Antenna options Barrett Communications Page 45

48 VHF Antenna options to 108 MHz centre-fed ground independent whip with stand-off bracket to suit composite masts x x T5 3.7 kg Frequency range MHz, power input 100 Watt, gain -6 dbi - +2 dbi, length 3 m, environmentally designed to comply with MIL-STD 810G. Note:- Requires 20 metres RG-213 coaxial cable P/N Rapid deployment composite mast metres x x T5 & C2 9.2 kg Retracted height 1.8 metres, 7.4 kg (complete), deployment time 10 mins typical. Colour Olive Green VHF Antenna options 10 metres air transportable aluminium mast - nylon guys x x N/A N/A Suitable for rapid deployment of VHF base antenna s. With Nylon guys and ground mounting. Packed length 2 metres, suitable for air-freight. - Offset bracket and pulleys - Nylon guys, guy anchor pegs, pulleys and halyard - Installation instructions Barrett Communications Page 46

49 VHF General options Tactical handset with keypad x x x x x C4 0.4 kg Tactical handset with waterproof MIL-SPEC connector, speaker, microphone, Press-To-Talk (PTT) button and backlit control keypad for use with advanced software features such as Selcall, Groupcall, key entry and front panel programming. Lightweight tactical headset (under helmet) x x x x x C4 0.2 kg Lightweight Tactical Headset, suited to under helmet mounting, with MIL-SPEC connector, speaker, microphone on a gooseneck and clip on Press-To-Talk (PTT) button. Tactical installation kit x x x C4 0.2 kg - Large selection of screws to accommodate most installations - Cable ties - Rubber amalgamation tape - Power cable lugs - Manual circuit breaker - Braided earth lead with lugs VHF Lightning arrestor kit x x C2 & T kg - 1 x Surge arrestor with N type (female) connectors - 1 x 5 metres length of RG58 Coaxial cable with N type (male) - 1 x Steel dolly - 1 x 3 m earth braid - 1 x Brass cable clamp assembly - 1 x Copper plated steel earth rod VHF General options Barrett Communications Page 47

50 VHF General options Canvas backpack - Multicam x C2 0.6 kg Canvas Backpack to suit the PRC VHF Tactical Handheld Package or VHF 5 W Tactical Transceiver with standard battery. The lightweight backpack design is suited to back mounting the transceiver (transceiver not included), mounting either a short or long antenna. Note:- Also available in Olive green colour P/N Webbing pouch - Multicam x C4 0.1 kg Webbing pouch to suit PRC W Tactical handheld. Colour - Multicam Note:- Also available in Olive green colour P/N Transceiver not included. Framed backpack - Multicam x C kg Framed back pack to suit PRC Note:- Also available in Olive green colour P/N Transceiver not included. VHF General options Backpack for PRC Multicam x C2 2.6 kg The full pack provides for the PRC and various accessories including field deployable broadband antenna and spare battery pack. The side packs can be detached from pack to make the pack more compact. Barrett Communications Page 48

51 VHF General options Rugged external mount speaker x x x C4 0.6 kg External mount speaker for the PRC W VHF transceiver when used in a mobile, or the PRC as a base or within a rebroadcast system. Note:- Cable part number is required to connect the speaker. VHF Speaker mounting bracket x x x C kg Speaker bracket for mounting the rugged external speaker to the vehicle docking station. Cable speaker x x x C kg Cable to connect the rugged external mount speaker to the PRC W VHF amplifier when used in a mobile, or the PRC as a base or within a rebroadcast system. Vehicle docking station to power supply cable x C kg Cable to connect vehicle docking station to AC power supply. VHF Handset mounting bracket x x x C kg Bracket to mount handset to the PRC W VHF Transceiver when use in a mobile, as a base or within a rebroadcast system. VHF General options Barrett Communications Page 49

52 VHF General options Vehicle docking station x x x C kg Vehicle docking station to connect PRC VHF Transceiver to vehicle/ base amplifier or direct to external VHF antenna. Provides DC supply, Audio/ RS-232 and RF connectors. Note:- Any required cables to be ordered separately. 50 W VHF Amplifier x x x C kg MHz, provides 50 W power output for PRC docked in vehicle docking station. Note:- Any required cables to be ordered separately. Mass matched vibration mounting platform for Land application x C4 2.3 kg For mounting a Vehicle Docking Station into an armoured or other shock-heavy vehicle. Note:- Includes transition plate. VHF General options Coaxial cable 0.1 metres x x C kg Coaxial cable 5 W to 25 W docking station or 50 W VHF amplifier. Barrett Communications Page 50

53 VHF General options Coaxial cable 0.4 metres x SA C kg Coaxial cable BNC to BNC 0.4 metres vehicle docking station to 50 W VHF amplifier for PRC W VHF Tactical re-broadcast system. Control cable 0.3 metres x x x C4 0.1 kg Interconnecting control cable 0.3 metres between 50 W VHF amplifier and vehicle docking station. DC Power cable x x x C kg DC Power cable to suit 50 W amplifier. Battery backup cable x x x C kg AC Power supply battery backup cable. VHF General options Barrett Communications Page 51

54 VHF General options Transportation casing x N/A 22.2 kg High impact polyester transportation casing with 8 RU shock mounted rack. VHF General options Barrett Communications Page 52

55 Interoperability HF VHF 2063 HF-VHF Crossgate x x C6 1.2 kg Enables interoperability between Barrett HF and Barrett VHF communication systems. Allows deployed troops to communicate directly with far distant command and control centres. Reduces delays in communicating time critical information. HF and VHF cables Interoperability Barrett Communications Page 53