Common Mode Choke Coils

Size: px

Start display at page:

Download "Common Mode Choke Coils"

Ashley Gardner
6 years ago
Views:

1 Common Mode Choke Coils For power line UF series Type: Two sections bobbin type for high frequency UF Issue date: September 0 Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

2 (/) Common Mode Choke Coils For Power Line Conformity to RoHS Directive UF Series TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(emi) and radio frequency interference(rfi) from power supply lines and for prevention of multifunctioning of products such as measuring equipment and system equipment. Wide range of selection. High impedance at applicable frequency. High self-resonant frequency. PRODUCT IDENTIFICATION UF V - A Y R - 0 () () () () (5) (6) (7) () Core shape UF: U-type core () Dimensional code Length Height () External shape code V: Vertical type H: Horizontal type () High µ material (5) Inductance value Example) :mh (6) Rated current value Example) R0:.0A (7) Product management number SELECTION CHART Series Configuration Type UF Two sections bobbin types Two sections bobbin types (For high frequency) Inductance value min. Rated current (A) Handling power=(inductance value) (Current). It is possible to design within the range below this value. [Example] The coil for A can make even the inductance of.5mh or less a product for handling power 0. Handling power L I (mh A ) Weight (g)typ. UF77V 0. to 0mH 0.5 to UF77H 0. to 0mH 0.5 to UF77V 0 to 60µH to UF85SG 50 to 50µH to Minimum package quantity (pieces/box) Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications / 009 / e9_uf_0

3 (/) Two Sections Bobbin Type UF Series This series is compact in size due to its use of high permeability ferrite core. UF77V/UF77H( SEPARABLE BOBBIN) TYPES 7.5max. max. 5.5max. 7.5max. TYPICAL 000 0YR5 00 ± 8±0.5 7max. ± 8±0.5.5max. (6) L L Y0R5 Y0R7 60YR0 0YR6 Weight:.5g typ. Recommended hole diameter: ø (mh)min. (Ω )max. Iac(A)max. UF77V-0YR UF77V-70Y0R UF77V-Y0R UF77V-8Y0R UF77V-5Y0R UF77V-Y0R UF77V-60YR UF77V-0YR UF77H-0YR UF77H-70Y0R UF77H-Y0R UF77H-8Y0R UF77H-5Y0R UF77H-Y0R UF77H-60YR UF77H-0YR LCR meter(hp6a, HP6B or equivalent)[f=khz] Rated 80 to 80 50Hz/60Hz 000 minute 00min. Temperature ( C) 5max. With line resistance 0 to +0 0 to +85 Resistance to 60±5 C, 0±sec Solder bath method soldering temperature 50±5 C, 5sec max. Soldering iron method standard Law ("DENAN"), IEC60065, UL6500, CSA C. Pb free solder(sn-ag-0.5cu) However, this product is not recognized by each regulations. UF77V 60pieces/box UF77H 80pieces/box 00-0 / 009 / e9_uf_0

4 (/) Two Sections Bobbin Type(For High Frequency) UF Series This series is designed to reduce stray capacity between windings by using a single-layer coil construction on Ni-Zn ferrite cores, which offer excellent high frequency characteristics. This series provides excellent noise suppression for high frequency ranges including the FM band. Since the windings are divided into two sections, this filter can also be used as a signal line with excellent withstanding voltage. UF77V( SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE TYPICAL max. 8± max YR0 00YR ± 7max. L L Weight: g typ YR0 00YR0 Recommended hole diameter: ø (µh)min. (mω )max. Iac(A)max. UF77V-600YR UF77V-00YR UF77V-00YR UF77V-00YR LCR meter(hp6a, HP6B or equivalent)[f=khz] UF77V 60pieces/box Rated 80 to 80 50Hz/60Hz 000 minute 00min. Temperature ( C) 5max. With line resistance 0 to +0 0 to +85 Resistance to 60±5 C, 0±sec Solder bath method soldering temperature 50±5 C, 5sec max. Soldering iron method standard Law ("DENAN"), IEC60065, UL6500, CSA C. Pb free solder(sn-ag-0.5cu) However, this product is not recognized by each regulations / 009 / e9_uf_0

(/) Two Sections Bobbin Type(For High Frequency) UF Series This series uses a Mn-Zn ferrite core and yet it offers excellent noise suppression into the high frequencies due to its low distributed

5 (/) Two Sections Bobbin Type(For High Frequency) UF Series This series uses a Mn-Zn ferrite core and yet it offers excellent noise suppression into the high frequencies due to its low distributed inductance construction based on a single layer winding. This compact filters's inductance has been improved by as much as 50% compared to exsting products of compareble size while its hight profile has been reduced by approximately 0%. UF85SG( SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE TYPICAL 8max. 7max. 5.5max..5±0.5 ø0.7 L L 0 5YR0 8YR 8YR6 ±0.5 0±0.5 Weight:.6g typ. Recommended hole diameter: ø. 0. 5YR 800YR0 650YR0 500Y5R (µh)min. (mω )max. Iac(A)max. UF85SG-5YR UF85SG-8YR UF85SG-8YR UF85SG-5YR UF85SG-800YR UF85SG-650YR UF85SG-500Y5R LCR meter(hp6a, HP6B or equivalent)[f=khz] UF85SG 80pieces/box Rated 80 to 80 50Hz/60Hz 000 minute 00min. Temperature ( C) 5max. With line resistance 0 to +0 0 to +85 Resistance to 60±5 C, 0±sec Solder bath method soldering temperature 50±5 C, 5sec max. Soldering iron method standard Law ("DENAN"), IEC60065, UL6500, CSA C. Pb free solder(sn-ag-0.5cu) However, this product is not recognized by each regulations / 009 / e9_uf_0

Common Mode Choke Coils(Line Filters)

Common Mode Choke Coils(Line Filters) For power line, Closed magnetic circuit core type HF Series Type: Vertical type HF36/HF38 /HF9 For large inductance HF04/HF4/HF430/HF86/HF836/HF3545 Issue date: December