(1)Core shape UF: U-type core. Inductance value Rated current Handling power Weight Minimum package quantity
|
|
|
- Arron Terry
- 6 years ago
- Views:
Transcription
1 (/) 00-0 / / e9_tf.fm TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(emi) and radio frequency interference(rfi) from power supply lines and for prevention of multifunctioning of products such as measuring equipment and system equipment. RATINGS Item Standard value Conditions Rated voltage(v) 80 to 80 Dielectric withstanding Between each winding for 000 voltage(v) minute Insulation resistance Between each winding for 00min. (MΩ) minute, Edc 500V Temperature rise( C) 5max. With line resistance Operating temperature Including self-temperature 0 to +0 range( C) rise Japan Electric/Electronic Products Control Law, Safety standard UL, CSA and IEC conforted(the safety standard is not acquired with the unit only.) Except particular items. Measuring equipment of inductance value: LCR meter(hp6a, HP6B or equivalent) PRODUCT IDENTIFICATION UF V Y R 0 () () () () (5) (6) (7) ()Core shape UF: U-type core TF: Toroidal core HF: Square shaped closed magnetic circuit core type Double-square shaped closed magnetic circuit core type ()Dimensional code(length Height) ()External shape code ()TDK s internal code (5) value Example) 60: 60µH 0 =6mH (6)Rated current value Example) R5:.5A (7)Product management number FEATURES Wide range of selection. High impedance at applicable frequency. High self-resonant frequency. SELECTION CHART Series Configuration Type value Rated current Handling power Weight Minimum package quantity min. (A) L I (mh A ) (g)typ. (pieces/box) TF08S 0.5 to.mh 0.5 to TF70B 0.5 to 7mH.5 to Horizontal types TF5B 0.5 to 0mH to (Toroidal core) TF85S, mh 0 to TF609S mh 0 to TF0S to mh.5 to Vertical types TF68V 0.5 to 7mH.5 to TF (Toroidal core) TF5V 0.5 to 0mH to Multi-section case types (For high frequency) TF9B 8.5 to 5mH.5 to Vertical types(toroidal core) TF68V-H 5 to 65µH 6 to (For high frequency) TF5V-H 5 to 0µH 8 to For three phase lines TF600T to 7.5mH 5 to (Toroidal core) TF605T 0. to.6mh 5 to Handling power=( value) (Current). It is possible to design within the range below this value. [Example] The coil for A can make even the inductance of.5mh or less a product for handling power 0.
2 (/) 00-0 / / e9_tf.fm HORIZONAL TYPE TF SERIES FEATURES This series uses a high permeability toroidal ferrite core and therefore provides large inductance with a little number of turns. Therefore its stray capacity is small and it keeps the impedance required to effectively suppress high frequency noises. Products mounted on a base with fixed leads are easy to insert to circuit boards. TF08S(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE 5± 9max. 6max. max. ELECTRICAL 5±0.5 L Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. L 0±0.5 Weight: 8g typ. Recommended hole diameter: +0.5 TYPICAL ELECTRICAL TF08S-Y0R5-0 (mh)min. (Ω)max. TF08S-Y0R TF08S-6YR TF08S-0YR TF08S-80YR TF08S-5YR TF08S-0YR5-0 TF08S-6YR-0 TF08S-5YR0-0 TF08S-80YR TF08S 900pieces/box
3 (/) 00-0 / / e9_tf.fm TF70B(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE 7max. () TYPICAL ELECTRICAL 7max. (0) 00 0 TF70B-70YR5-0 TF70B-50YR0-0 TF70B-0YR0-0 Lot No. max. Weight: 0g typ. 0. TF70B-5Y0R0-0 TF70B-80Y8R0-0 TF70B-5Y5R0-0.5± Recommended hole diameter: ELECTRICAL (mh)min. (Ω)max. TF70B-70YR TF70B-50YR TF70B-0YR TF70B-5Y5R TF70B-80Y8R TF70B-5Y0R Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF70B 00pieces/box
4 (/) 00-0 / / e9_tf.fm TF5B(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE max. () TYPICAL ELECTRICAL max. (8) 00 0 TF5B-0YR0-0 TF5B-70YR0-0 TF5B-50Y5R0-0 TF5B-0Y6R0-0 Lot No. 6max..5± Weight: g typ. Recommended hole diameter: +0.5 ELECTRICAL (mh)min. (Ω)max. TF5B-0YR TF5B-70YR TF5B-50Y5R TF5B-0Y6R TF5B-0Y8R TF5B-0Y0R TF5B-60Y5R TF5B-0Y0R Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. 0. TF5B-0Y0R0-0 TF5B-60Y5R0-0 TF5B-0Y0R0-0 TF5B-0Y8R TF5B 00pieces/box
5 (5/) 00-0 / / e9_tf.fm TF85S(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE (5) TYPICAL ELECTRICAL ø.5 00 (5) 0 TF85S-0Y0R0-0 ø50max. H max. 0. TF85S-0Y5R0-0 5± L Weight: 95g typ. L Recommended hole diameter: +0.5 ELECTRICAL (mh)min. (mω)max. H max. TF85S-0Y0R TF85S-0Y5R Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF85S 0pieces/box
6 (6/) 00-0 / / e9_tf.fm TF609S(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE (50) TYPICAL ELECTRICAL ø6 0 ø6max. (0) 0. TF609S-0Y0R0-0 TF609S-0Y0R0-0 5± H max. L L Weight: 05g typ. Recommended hole diameter: +0.5 ELECTRICAL (mh)min. (mω)max. H max. TF609S-0Y0R TF609S-0Y0R Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF609S 70pieces/box
7 (7/) 00-0 / / e9_tf.fm VERTICAL TYPE TF SERIES FEATURES This series uses a high permeability toroidal ferrite core and therefore provides large inductance with a little number of turns. Therefore its stray capacity is small and it provides the impedance levels required to effectively suppress high frequency noises. Products mounted on a base with fixed leads are easy to insert to circuit boards. TF0S(VERTICAL TYPE WITHOUT TERMINAL BASE) TYPE ø0max. max. TYPICAL ELECTRICAL 00 (0) TF0S-0YR5-0 0 L L 5± TF0S-0YR5-0: 5± Weight: 6.5g typ. Recommended hole diameter: TF0S-0YR0-0 TF0S-YR0-0 ELECTRICAL (mh)min. (Ω)max. TF0S-0YR TF0S-YR TF0S-0YR Electrical Appliance and Material Safety Law ("DENAN") TF0S 000pieces/box
8 (8/) 00-0 / / e9_tf.fm TF68V(VERTICAL TYPE WITH TERMINAL BASE) TYPE 5± ø7max. 8max. max. L (0) L (5) TYPICAL ELECTRICAL TF68V-70YR5-0 TF68V-50YR0-0 TF68V-0YR0-0 TF68V-5Y0R0-0 TF68V-80Y8R0-0 TF68V-5Y5R0-0 Weight: 0g typ. Recommended hole diameter: ELECTRICAL (mh)min. (Ω)max. TF68V-70YR TF68V-50YR TF68V-0YR TF68V-5Y5R TF68V-80Y8R TF68V-5Y0R Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF68V 700pieces/box
9 (9/) 00-0 / / e9_tf.fm TF5V(VERTICAL TYPE WITH TERMINAL BASE) TYPE 5± ø5max. 5max. 5max. L (8) L Weight: g typ. (6) Recommended hole diameter: +0.5 or more TYPICAL ELECTRICAL TF5V-0YR0-0 TF5V-70YR0-0 TF5V-50Y5R0-0 TF5V-0Y0R0-0 TF5V-60Y5R0-0 TF5V-0Y0R0-0 TF5V-0Y8R0-0 TF5V-0Y6R ELECTRICAL (mh)min. (Ω)max. TF5V-0YR TF5V-70YR TF5V-50Y5R TF5V-0Y6R TF5V-0Y8R TF5V-0Y0R TF5V-60Y5R TF5V-0Y0R Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF5V 0pieces/box
10 (0/) 00-0 / / e9_tf.fm Separable Case Type MULTI-SECTION CASE TYPE (FOR HIGH FREQUENCY) TF SERIES FEATURES This series uses six-section windings for each line, which contribute to reduced stray capacity and excellent impedance characteristics in high frequency ranges. TF9B(FOR HIGH FREQUENCY) TYPE 7.5± ±0.5 TYPICAL ELECTRICAL 00 0±0.5 ømax. 0max. T L.a L.b L.a L.b T 0 TF9B-85YR5-0 TF9B-0YR0-0 TF9B-5YR5-0 ± ø Weight: 0.5g typ. Recommended hole diameter: ø ELECTRICAL DC resistance Rated current (mh)min. (Ω)max. TF9B-5YR TF9B-0YR TF9B-85YR Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF9B 75pieces/box
11 (/) 00-0 / / e9_tf.fm FEATURES This series is designed to reduce stray capacity between windings by using a single-layer coil construction on Ni-Zn ferrite cores, which offer excellent high frequency characteristics. This series provides exellent noise suppression for high frequency ranges including the FM band. TF68V-H(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE max. (0) (5) TYPICAL ELECTRICAL 0 TF68V-650Y6R0-H ø7max. 5± 8max. L L Weight: 8g typ. Recommended hole diameter: TF68V-50Y9R0-H TF68V-50YR0-H ELECTRICAL (µh)min. (Ω)max. TF68V-650Y6R0-H TF68V-50Y9R0-H TF68V-50YR0-H Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF68V 700pieces/box
12 (/) 00-0 / / e9_tf.fm TF5V-H(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE 5max. (8) (6) TYPICAL ELECTRICAL 0 TF5V-Y8R0-H ø5max. 5max. L L Weight: 0g typ TF5V-750YR0-H TF5V-50Y5R0-H 5± Recommended hole diameter: +0.5 TF5V-50Y0R0-H ELECTRICAL (µh)min. (Ω)max. TF5V-Y8R0-H TF5V-750YR0-H TF5V-50Y5R0-H TF5V-50Y0R0-H Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF5V 0pieces/box
13 (/) 00-0 / / e9_tf.fm for -Phase TOROIDAL CORE TYPE FOR THREE PHASE LINES TF SERIES FEATURES This series uses a high permeability toroidal ferrite core and can handle heavy currents with fewer number of turns. TF600T(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE ø60max..±0.5 6±0.5.6±0.5.9±0.5.9± ±0.5.7±0.5.7±0.5 TYPICAL ELECTRICAL TF600T-75Y5R TF600T-0YR0-0 TF600T-6Y0R0-0 6max ± L L Weight: 50g typ. 6 L 5 Recommended hole diameter: +0.5 ELECTRICAL (mh)min. (Ω)max. TF600T-75Y5R TF600T-6Y0R TF600T-0YR Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF600T 70pieces/box
14 (/) 00-0 / / e9_tf.fm for -Phase TF605T(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE.9±0.5.9±0.5 ø6max. 6max..±0.5 6± ± ±0.5.7±0.5.7±0.5 TYPICAL ELECTRICAL TF605T-6Y5R0-0 TF605T-0Y0R0-0 TF605T-50Y5R0-0 TF605T-0Y0R0-0 5± L L Weight: 60g typ. 6 L 5 Recommended hole diameter: +0.5 ELECTRICAL (mh)min. (mω)max. TF605T-6Y5R TF605T-0Y0R TF605T-50Y5R TF605T-0Y0R Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C. TF605T 70pieces/box
Inductance value Rated current Handling power Weight Minimum package quantity
(/6) 00-0 / 00505 / e9_uf.fm TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(emi) and radio frequency interference(rfi) from power supply
Inductance value Rated current Handling power Weight Minimum package quantity
(/6) 00-0 / 00 / e9_uf.fm TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(emi) and radio frequency interference(rfi) from power supply lines
Common Mode Choke Coils
Common Mode Choke Coils For power line UF series Type: Two sections bobbin type for high frequency UF Issue date: September 0 Conformity to RoHS Directive: This means that, in conformity with EU Directive
Common Mode Choke Coils(Line Filters) for Signal Line UF and TF Series
(/7) Common Mode Choke Coils(Line Filters) for Signal Line UF and TF Series Conformity to RoHS Directive TDK s compact type common mode choke coils are suitable for protecting telephone circuitry from
Common Mode Choke Coils(Line Filters)
Common Mode Choke Coils(Line Filters) For power line, Closed magnetic circuit core type HF Series Type: Vertical type HF36/HF38 /HF9 For large inductance HF04/HF4/HF430/HF86/HF836/HF3545 Issue date: December
EMC Components. HF Series Common-Mode Choke Coils for AC Power Supply Closed Magnetic Circuit, High Impedance
(/5) FEATURES Comprising double-square closed magnetic circuit ferrite cores and windings on partitioned bobbins, these common-mode choke coils are useful for noise suppression. With the small size and
Applications SC JS. Series Rated Current AC (A) Inductance (mh) Minimum Terminal Base Type 0x- = x A. x0 = x mh xx = x.x mh 0x = 0.
AC Line Filters Common Mode SC Coils, SC-JS Series, Terminal Base Type Overview The KEMET SC-JS coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with
Applications SU 9 VD
AC Line Filters Common Mode SU Coils, 9VD Series, High Frequency Type Overview The KEMET SU coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with
Applications SC JH. Series Rated Current AC (A) Inductance (mh) Minimum Terminal Base Type x0- = x0 A xx- = xx A. x0 = x mh xx = x.
AC Line Filters Common Mode SC Coils, SC-JH Series, Terminal Base Type Overview The KEMET SC-JH coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with
Applications. Overview. Benefits. Part Number System. AC Line Filters Common Mode SSRH Coils, 24NVS/NHS, Wide Range Impedance Type
AC Line Filters Common Mode SSRH Coils, 24NVS/NHS, Wide Range Impedance Type Overview The KEMET SSRH24NV/NH coils are common mode chokes with a wide variety of characteristics. These gear type coils are
Applications SSR 21N VS Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 21NVS/NHS, Wide Range Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed
Applications SSHB 10 HS- R Core Type
AC Line Filters Dual Mode SSHB Coils, 10HS Series, Wide Range Impedance Type Overview The KEMET SSHB coils are dual mode chokes with a wide variety of characteristics. These hybrid coils combine the two
Applications SS 30 V- R
AC Line Filters Common Mode SS Coils, 0V Series Overview The KEMET SS coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary ferrite
Applications SSR 21N V-M Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 21NV-M/NH-M, High Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with
Applications SS 11 VL- R
AC Line Filters Common Mode SS Coils, VL Series Overview The KEMET SS coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary ferrite
Applications SSR 10 V Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 10VS/HS, Wide Range Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed
Applications SSHB 21 HS- R Core Type
AC Line Filters Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Overview The KEMET SSHB coils are dual mode chokes with a wide variety of characteristics. These hybrid coils combine the two
Applications SSRH 7 HS-M Core Orientation and Bobbin Type
AC Line Filters Common Mode SSRH Coils, 7HS-M, Wide Range Impedance Type Overview The KEMET SSRH7H-M coils are common mode chokes with a wide variety of characteristics. These low current and high inductance,
Applications SS 26 V- R
AC Line Filters Common Mode SS Coils, 2V Series Overview The KEMET SS coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary ferrite
Inductors for Power Circuits
Inductors for Power Circuits Radial lead TSL series Type: TSL0709 TSL0808 TSL1112 TSL1315 Issue date: September 2011 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC,
The Reliable Source... FERROPERM. Inductors. Transformers
The Reliable Source... FERROPERM for High Quality Inductors and Transformers INDUCTORS AND TRANSFORMERS from FERROPERM UK Ltd. FERROPERM offers a manufacturing capability for the production of most types
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein
EMI Cores ESD-R-B Toroidal Cores for Round Cables for Low & High Frequency (with snail-shaped case) Applications
EMI Cores ESD-R-B Toroidal Cores for Round Cables for Low & High Frequency (with snail-shaped case) Overview The KEMET ESD-R-B series solid toroidal cores are designed to use on round cables. The wide
Section 13. Toroids COATINGS
Section 13. Toroids Ferrite toroids offer high magnetic efficiency as there is no air gap, and the cross sectional area is uniform. Available in many sizes ('s from.100" to 3.375") and materials (permeabilities
Shielded Power Inductors
Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz
Common Mode Chokes BU Series
Document 60- Common Mode Chokes BU Series These low cost, high performance choke coils are designed to virtually eliminate line conducted common mode noise. The BU9S and BU9HS families are ideal for signal
EMI Cores ESD-R-H Toroidal Cores for Round Cables for Low & High Frequency & High Heat Resistance (with case) Applications
EMI Cores ESD-R-H Toroidal Cores for Round Cables for Low & High Frequency & High Heat Resistance (with case) Overview The KEMET ESD-R-H Series solid toroidal cores feature high heat resistance for round
Overview. Applications. Benefits. EMI Cores ESD-SR Snap-on Cores for Round Cables for Low & High Frequency (with case)
EMI Cores ESD-SR Snap-on Cores for Round Cables for Low & High Frequency (with case) Overview The KEMET ESD-SR Series snap-on toroidal cores are designed for use on round cables. The wide range of Manganese
COMPLIANT Common Mode Chokes - UU9.8 & UU10.5 Series
Document FR00 COMPLIANT Common Mode Chokes - UU9.8 & UU0.5 Series Order Code MCU 000 MCU 0002 Core Mounting Inductance mh (Min) UU9.8 Series Current Rating ma (steady state) 350 350 Leakage DC Inductance
Power line chokes. Current-compensated D core double chokes 250 V AC, A, mh. Series/Type: B82731M/H Date: March 2008
50 V AC, 0.5 1.8 A,. 100 mh Series/Type: B871M/H Date: March 008 Data Sheet EPCOS AG 008. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS
COMPONENTS MODULES CORES
COMPONENTS MODULES CORES 211 SUMIDA Components & Modules GmbH Dr. Hans-Vogt-Platz 1 D-9413 Obernzell Phone: ++49/85 91/937- Fax: ++49/85 91/937-3 E-Mail: contact@sumida-eu.com Internet: www.sumida-eu.com
-Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the 'C' dimension of the toroid.
Part Number: 5978014001 Frequency Range: Medium Permeability, 77 (ui=2000) & 78 (ui=2300) materials Description: Application: Where Used: Part Type: 78 TOROID Inductive Components Closed Magnetic Circuit
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]
![Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]](/thumbs/89/98622962.jpg "Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]")
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2018.
Notice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
-Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the 'C' dimension of the toroid.
Part Number: 5967001701 Frequency Range: Low Permeability, 67 (ui=40) material Description: Application: Where Used: Part Type: 67 TOROID Inductive Components Closed Magnetic Circuit Toroids Mechanical
Section 13. Toroids. Parylene C is a trademark of Union-Carbide Corp. Material R P F J W H. Color Blue Green White Red Yellow Purple 13.
Section 13. Toroids Ferrite toroids offer high magnetic efficiency as there is no air gap, and the cross sectional area is uniform. vailable in many sizes ( s from.100" to 3.375"), and materials (permeabilities
Power line chokes. Current-compensated U core double chokes 300 V AC, A, mh, +40 C. Series/Type: B82730U/G Date: July 2012
300 V AC, 0.4 2.6 A, 0.33 15 mh, +40 C Series/Type: Date: July 2012 a~í~=püééí EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
Bridgeport Magnetics Design Guide
Bridgeport Magnetics Design Guide Our design guide takes you step by step through the process of designing a toroidal transformer. No engineering design charges for all standard designs. State of the art
Filters and Ring Core Chokes
Filters and Ring Core Chokes Description FP Series L Series LP Series These Filters and chokes are designed to reduce input interference and/or output ripple voltages occurring in applications with switched
Design Considerations
Design Considerations Ferrite beads provide a simple, economical method for attenuating high frequency noise or oscillations. By slipping a bead over a wire, a RF choke or suppressor is produced which
CX15N351 COAXIAL DATASHEET
CX15N351 COAXIAL DESCRIPTION This CX15N351 is designed to provide an excellent frequency response linearity with very low distortion. This coaxial use a strongest unique neodymium magnetic structure that
-Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the 'C' dimension of the toroid.
Fair-Rite Product's Catalog Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Part Number: 5977011101 Frequency Range: Medium Permeability, 77 (ui=2000) & 78 (ui=2300) materials
Section Toroids COATING CODE (SEE PG 13.2) FERRITE CORE MATERIAL TYPE USED FOR ALL FERRITE TYPES APPROXIMATE DIAMETER IN MM
TOROIDS Ferrite toroids offer high magnetic efficiency as there is no air gap, and the cross sectional area is uniform. Available in many sizes (s from 2.54mm to 107mm) and materials (permeabilities ranging
Features and Applications of New Type Inductors
Features and Applications of New Type Inductors 2011.4 Contents 1 Main Product Categories 2 Development Roadmap 3 4 High Q Factor Multilayer Chip Ceramic Inductor Multilayer Chip Power Inductor Main Product
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded RLF series Type: RLF7030 (7.3x6.8 mm) RLF12545 (12.5x12.8 mm) RLF12560 (12.5x12.8 mm) Issue date: September 2011 (1/6) Inductors for Power Circuits
TOROIDAL CORES : IRON POWDER CORES
1 von 19 19.07.2007 08:49 TOROIDAL CORES : IRON POWDER CORES Iron Powder Cores are made in numerous shapes and sizes: such as Toroidal Cores, E- cores, Shielded Coil Forms, Sleeves etc., each of which
SELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ) 1 Ripple & Noise (Max) 1 Efficiency
I-TECH INDUCTIVE TECHNOLOGIES, INC.
INDUCTIVE TECHNOLOGIES, INC. n Toroidal and Pot Core Inductors n Pot Core Flyback Transformers n Drum Core Power Inductors n Surface Mount Power Inductors n Current Sense Transformers n T1/CEPT/ISDN Primary
SMT Inductors, SIMID Series SIMID 0603-C
SIMID 0603-C B82496-C Size 0603 (EIA) and/or 1608 (IEC) Rated inductance 1,0 to 220 nh Rated current 70 to 500 ma Construction Copper-plated ceramic core Laser-cut winding, epoxy-coated Features Extremely
Data and signal line chokes
2.2 47 mh, 100 ma, +60 C Series/Type: B82791G15/H15 Date: October 2008, October 2011 a~í~=püééí EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
Welcome to Wurth Electronics product presentation. This module overviews the available magnetics solutions for various LED lighting applications,
Welcome to Wurth Electronics product presentation. This module overviews the available magnetics solutions for various LED lighting applications, their key features, and their various applications. 1 Before
MAGNETIC PRODUCTS. SMD Beads and Chokes
MAGNETIC PRODUCTS SMD Beads and Chokes Philips Components Magnetic Products SMD beads in tape November 1994 2 Magnetic Products Philips Components Contents page SMD Beads 8 SMD Common Mode Chokes 14 SMD
10 3,5. 0,5 x 0,5 0,12 0,16 0,20 0,25 0,32 0,40 0,50 0,70 1,00
storage choke, vertical EE 3 EE 3/XXXX 5 0,5 x 0,5 4,5 pin grid = 3,75 mm privileged series /LI ca. 5 µws EE 3 EE 3-0,/ 00 EE 3-0,/ 500 EE 3-0,0/ 3 EE 3-0,5/ 500 EE 3-0,3/ 00 EE 3-/ 900 EE 3-/ 700 EE 3-0,70/
Data and signal line chokes
.7.7 mh, 3 6 ma, 6 C Series/Type: Date: April 28 %BUBIFFU EPCOS AG 215. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
SELECTION GUIDE. Nominal Input Voltage Output Voltage. Output Current
www.murata-ps.com CRV2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
January Pulse transformers. For LAN interface (10/100/1000BASE-T) ALT series. * Dimensions Code JIS[EIA]
![January Pulse transformers. For LAN interface (10/100/1000BASE-T) ALT series. * Dimensions Code JIS[EIA]](/thumbs/77/75003580.jpg "January Pulse transformers. For LAN interface (10/100/1000BASE-T) ALT series. * Dimensions Code JIS[EIA]")
January 2018 Pulse transformers For LAN interface (10/100/1000BASE-T) ALT series ALT3232M ALT4532M 3232 [1210 inch]* 4532 [1812 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS
Applications. Overview. Benefits. Ordering Information. Pulse Transformers Device for HD-PLC, PLT Series
Pulse Transformers Device for HD-PLC, PLT Series Overview The KEMET PLT pulse transformers are common mode choke coils suitable for Power Line Communication (PLC). Designed with our proprietary ferrite
Properties of Inductor and Applications
LABORATORY Experiment 3 Properties of Inductor and Applications 1. Objectives To investigate the properties of inductor for different types of magnetic material To calculate the resonant frequency of a
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 510-S I PN = 500 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated
NCS3 Series Isolated 3W 4:1 Input Single Output DC-DC Converters
FEATURES UL 9 recognised 4:1 Wide range voltage input Operating temperature range - C to 85 C with derating 1.5 kvdc Isolation Hi Pot Test 3.3V, 5V, & 15V outputs No electrolytic capacitors Continuous
Inductors for Standard Circuits
Inductors for Standard Circuits Multilayer/STD magnetic shielded MLF series Type: MLF05L MLF608 MLF202 05[0402 inch]* 608[0603 inch] 202[0805 inch] * Dimensions Code JIS[EIA] Issue date: November 20 Conformity
Understanding and Optimizing Electromagnetic Compatibility in Switchmode Power Supplies
Understanding and Optimizing Electromagnetic Compatibility in Switchmode Power Supplies 1 Definitions EMI = Electro Magnetic Interference EMC = Electro Magnetic Compatibility (No EMI) Three Components
Leakage Flux Recovery Coil for Energy Harvesting Using Magnetoplated Wire
APSAEM14 Jorunal of the Japan Society of Applied Electromagnetics and Mechanics Vol.3, No.3 (15) Regular Paper Leakage Flux Recovery Coil for Energy Harvesting Using Magnetoplated Wire Tatsuya YAMAMOTO
NCS1 Series Isolated 1W 4:1 Input Single Output DC/DC Converters
NCS1 Series SELECTION GUIDE FEATURES UL 9 recognised 4:1 Wide range voltage input Operating temperature range -4 C to 15 C with derating 1kVDC Isolation Hi Pot Test 3.3V, 5V & 12V outputs No electrolytic
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 210-S/SP3 I PN = 100 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 1010-S/SPA2 I PN = 1000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and
Design Considerations
Design Considerations APPLICATION NOTES: Multi-hole cores provide specialized shapes that are sometimes more useful than single hole devices. One example is wide band transformers where good coupling between
J SERIES JBW. Wide input, compact and device-embedded type
(/) Wide input, compact and device-embedded type J SERIES JBW UL/CSA, EN9 approved and Electric Appliances And Material Control Law compliant, CE marking product (-year warranty period) [FEATURES] Compact
(TR4308I) RFID Transponder Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TR4308I) RFID Transponder Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and secondary circuit.
Current Transducer LF 510-S I P N = 500 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and secondary circuit. Features Bipolar and insulated
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LF 21-S/SPA2 I P N = 2 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated
Power line chokes. Current-compensated D core double chokes 250 V AC, mh, A, +40 C. Series/Type: B82731M/H Date: December 2016
250 V AC, 3.3 100 mh, 0.35 1.8 A, +40 C Series/Type: Date: December 2016 a~í~=püééí EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 2010-S I PN = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated
Data and signal line chokes
4.7 68 mh, 200 700 ma, 40 C Series/Type: B82720H15 Date: October 2008 %BUB4IFFU EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
NME Series Isolated 1W Single Output DC-DC Converters
www.murata-ps.com NME Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load V V ma ma Load Regulation 2 Ripple & Noise % mv p-p Typ. Max. Typ.
VI TELEFILTER Resonator specification TFR 868D 1/5
VI TELEFILTER Resonator specification TFR 868D 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance * for input: 50Ω for output: 50Ω Characteristics Remark:
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LF 2010-S/SPA7 I P N = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and
MIL-STD 1553 Interface Transformers - DBIT x 3 S
Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x S () (-) () (-) (mh) min at khz-v DBIT S : : 0.0. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S
CRL2 Series. Isolated 2W Single Output DC/DC Converters FEATURES PRODUCT OVERVIEW
www.murata-ps.com CRL2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
MER1 Series 1kVDC Isolated 1W Single Output DC-DC Converters
www.murata-ps.com MER1 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
CMC 14 Common Mode Chokes Series
7 Electrical Data ID Code Inductance Value at C (-/+%) Less than % performance variations versus temperature (- C / + C) Minimum impedance attenuation : Ω from khz to MHz Compact SMD package (x pins) Applied
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LF 2010-S/SPA0 I P N = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and
(TREC) Wire Wound RF Chip Inductor
Version: February 21, 2017 (TREC) Wire Wound RF Chip Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
Power line chokes. Current-compensated frame core double chokes 300 V AC, A, mh, +40 C. Series/Type: B82733F/V Date: May 2015
300 V AC, 0.7 2.3 A, 10 100 mh, +40 C Series/Type: Date: May 2015 a~í~=püééí EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
SMT Inductors SIMID 1812-T B82432-T. Data Sheet
SMT Inductors Data Sheet Size 1812 (EIA) or 4532 (IEC) Rated inductance 1,0 to 1000 µh Rated current 70 to 1300 ma Construction Upright ferrite drum core Laser-welded winding Flame-retardant encapsulation
Current-compensated frame core double chokes 300 V AC, A, mh, +40 C
300 V AC, 0.7 2.3 A, 10 100 mh, +40 C Series/Type: B82733F/V Date: November 2018 a~í~=püééí TDK Electronics AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and
Applications SS 35 V
AC Line Filters Common Mode SS Coils, 5V/H Series Overview The KEMET SS Coils, SS5V/H Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LF 1010-S/SPA5 I P N = 1000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and
PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
SMD Pulse Transformer for Ethernet Applications. The New Reference LAN Pulse Transformer
Fascinating, Fast, Accurate Communication SMD Pulse Transformer for Ethernet Applications ALT Series The New Reference Pulse Transformer In recent years, connectors have become standard equipment not only
TRANSFORMERS & INDUCTORS MYRRA....Of course!
TRANSFORMERS & INDUCTORS...Of course! COMPANY PROFILE Myrra is a major supplier in high quality for electronics components. Myrra has established a worldwide reputation. Myrra design and manufacture high-quality
(TREM) High SRFs RF Inductor
Version: March 1, 2017 Electronics Tech. (TREM) High SRFs RF Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang
MER1 Series 1kVDC Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MER1 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
Design Study. Reducing Core Volume in Matrix Transformers
Design Study Reducing Core Volume in Matrix Transformers It is desirable to minimize the volume of a transformer core. It saves weight, space and cost. Some magnetic materials are quite expensive, and
Balanced unbalanced transformation between antenna and cable (TV tuner) B W 21 S A01 T F. Structure Winding Type. Port Impedance.
Wire Wound Chip Balun Transformer BW-S Series Operating Temp. : -40 ~+85 FEATURES Winding type realizes small size and low profile Surface mount type Low insertion loss at frequency range Excellent solderability
The design of Ruthroff broadband voltage transformers M. Ehrenfried G8JNJ
The design of Ruthroff broadband voltage transformers M. Ehrenfried G8JNJ Introduction I started investigating balun construction as a result of various observations I made whilst building HF antennas.
Power line chokes. Current-compensated frame core double chokes 250 V AC, A, mh, +40 C. Series/Type: B82733F Date: March 2011
250 V AC, 0.7 2.3 A, 10 100 mh, +40 C Series/Type: B82733F Date: March 2011 a~í~=püééí EPCOS AG 2011. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
Accessories Filter & Ring Core Chokes FP, L and LP Series
Description These Filters and chokes are designed to reduce input interference and/or output ripple voltages occurring in applications with switched mode power supplies. Since all our filters contain a
Interference Suppression Film capacitors
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic category
Current-compensated frame core double chokes 250 V AC, A, mh, +40 C
250 V AC, 0.45 1.6 A, 10 100 mh, +40 C Series/Type: B82732F Date: June 2013 a~í~=püééí EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information