EAC/AFV-P SERIES. High performance programmable AC power source 600 VA to 5 kva only in 2 U or 5 U

Transcription

1 EAC/AFV-P SERIES High performance programmable AC power source 600 VA to 5 kva only in 2 U or 5 U N ONLY 5I U 2U/

2 EAC/AFV-P Series General Features Output frequency up to Hz AC source with DC output AC+DC Power line disturbance simulation Multiple simulation functions Fast response time: 300 us 600 VA to 5 kva only in 2 U or 5 U Low THD: 0.3 % at < 100 Hz Complete interface options: RS232 / RS485 / Ethernet / USB / GPIB Intuitive touchscreen HMI High performance programmable AC power source Et System electronic AFV-P Series is a programmable AC power source with DC output and precision measurements. This compact power source comes in four power Ievels, 600 VA, 1250 VA, 2500 VA and 5000 VA, providing clean power with distortion less than 0.3 % at 50/60 Hz. The AFV-P series can deliver output voltage from 0 to 310 VAC and frequency from 40 to 500 Hz (opt. 15 to 1000 Hz). lt is ideal for commercial, defense and aerospace test applications from design verification, quality assurance, ATE to mass production. Totall 200 test steps in 50 built-in memories and transient generation functions provide simulation of voltage variations, surges, drops and frequency disturbances. With the state-of-the-art PWM technology, the AFV-P series is capable delivering up to 4.5 times of peak current from its max. rated current that makes it ideal for inrush current test. Users can also set up starting and ending phase angle from 0 to 360 degrees. The AFV-P series comprises measurement features of rms voltage, rms current, true power, apparent power, power factor, crest factor, reactive power and etc. lts 5" touchscreen with rotary knob allows quick adjustments and configurations of voltage, current and frequency. Users can also remotely control the AC source via standard interfaces of USB. RS232/RS485, LAN or optional GPIB and analog control. Free control software and LabVIEW driver are available for easy programming and remote control. Compact & high power density AC source with DC output 2 U/5 U 2 U: 600 VA / 1250 VA / 2500 VA 5 U: 5000 VA Ideal for inrush current Capable of delivering up to 4.5 times of peak current Low distortion (THD) THD is only < 0.3 % when output is < 100 Hz Extend the applications to DC testing Wide output voltage & frequency V Hz Current Foldback Feature Current feldback featurewill have output current maintain constant based on the Ioad while outputvaltage varies

3 Panel Description 1. Power Switch 2. Touch Screen HMI 3. Rotary Knob 4. Output / Reset 5. AC output terminal 6. Output terminal 7. Remote sense 8. USB interface 9. Ethernet interface 10. RS232 / RS Input range selector 12. PLC Remote in/out 13. USB for system (not used) 14. Sync. singal I/O 15. Input terminal Front panel overview Rear panel overview

4 EAC/AFV-P Series Key Features Sweep & Ramp test The EAC AFV-P series offers an easy and convenient method to execute a single step or continuous output changes. The sweep function is ideal for voltage and frequency variation tests. The response time of voltage and frequency changes are within one cycle. User can also use the ramp function to adjust slew rate of voltage and frequency changes. Ramp function can also effectively reduce the inrush current during motor startup. There are up to 50 memories can be stored and recalled; each memory has 24 steps for user to set up. Transient generation (Power line disturbance) Intuitive touch panel Transient generation is an extended feature that provides the users an easy setup for power line disturbance simulation. Common waveform disturbances such as surge, sag, spikes, and dropouts can be generated for application like immunity test. Users can quickly select the parameters via 5 inches touch panel or rotary knob, which provides an easy operation and measurement display. Start/End angle & high peak current for inrush current 90 Start angle Inrush current for 90 Start angle 90 End angle EAC AFV-P Series is capable of providing high output peak current (max. 4.5 peak/rms), and this feature makers it ideal for inrush current happened in motor testing. Users can also define the start and end phaseangle from 0 to 360, which is suitable for switching power inrush testing.

5 EAC/AFV-P Series Key Features Control software Fast slew rate Measurement < 300 µs EAC AFV-P Series provides control software and Labview driver that allow users to easily setup the remote control for the power source without further need of programming. For tests like sags, surges, dropouts, or spikes, slew rate is a critical factor. EAC AFV-P series is a high performance AC source that has a high slew rate ot less than 300 µs from 0 ~ 90 output voltage. It allows users to do pre-compliance test such as IEC or MIL-STD-704F.

6 DC Output Output Input Measurement General Phase Voltage 98 ~ 132 VAC / 196 ~ 264 VAC 196 ~ 264 VAC or 175 ~ 235 VA Frequency Max. current Single 47 Hz 63 Hz (opt. 400 Hz) ± 0.02 % F.S. Frequency 10 A 20 A 20 A 40 A Power (VA) 600 VA VA VA VA Power (W) 500 W W W W Phase Voltage ranges Voltage resolution Frequency Frequency resolution 1Ø / 2 Wire + G Vrms / Vrms (user selectable) 0.1 Vrms Hz (opt Hz) 0.1 Hz, 1 Hz at > 100 Hz Max. current (RMS) 5 A / 2.5 A 10 A / 5 A 20 A / 10 A 40 A / 20 A Max. current (Peak) 22.5 A / 11.3 A 45 A / 22.5 A 90 A / 45 A 180 A / 90 A Total harmonic distortion (THD) Line regulation Load regulation 0.3 % at Hz 0. 5 % at Hz 0.8 % at Hz (Resistive load) ± 0.1 V 0.08 % F.S. (Resistive load) Response time 300 µs Crest factor 3 Inrush current 4.5 times max. output current (r.m.s) Power 300 W 600 W W W Voltage range V / V Max. current 2.5 A / 1.25 A 5 A / 2.5 A 10 A / 5 A 20 A / 10 A Ripple & Noise (RMS) 0.15 % 0.24 % Voltage range Voltage accuracy Voltage resolution Frequency range Frequency accuracy Frequency resolution Vrms ± (0.2 % of reading + 5 counts) 0.1 V Hz ± 0.1 Hz at Hz ± 0.2 Hz at Hz Current range Hi: 1 12 A / Lo: A Hi: 2 24 A / Lo: A Hi: A Current accuracy 0.1 Hz ± (1 % of reading + 5 counts) at Hz. ± (1 % of reading + 10 counts) at Hz Current resolution Hi: 0.01 A / Lo: A Hi: 0.01 A Peak current range 0 45 A 0 90 A A Peak current accuracy Peak current resolution ± (1 % of reading + 5 counts) at Hz. ± (1 % of reading + 10 counts) at Hz Power range Hi: W / Lo: W Hi: W / Lo: W Hi: W Power accuracy 0.1 A ± (1 % of reading + 5 counts) at Hz. ± (1 % of reading + 10 counts) at Hz Power resolution Hi: 1 W / Lo: 0.1 W Hi: 1 W Efficiency Protection Remote interface Over current foldback Output sync signal Memories EAC-AFV-P-600 EAC-AFV-P-1250 EAC-AFV-P-2500 EAC-AFV-P % at max. power OVP, OCP, LVP, OPP, OTP, RCP, Fan Fail Standard: RS232 / RS485 / Ethernet / USB / PLC Remote ln&out. Option: GPIB / Analog control CC Mode (Constant current) ON, Event for voltage or frequency change (output signal 5V, BNC type) 50 memories & steps (24 steps/memory) Operating temperature 0 C 40 C Dimensions (HxWxD) 89 x 442 x 474 mm 89 x 442 x 624 mm 223 x 442 x 624 mm Weight approx. 16 kg approx. 20 kg approx. 32 kg approx. 70 kg