MK06 Series Reed Sensors for PCB Mounting. MEDER electronic DESCRIPTION APPLICATIONS FEATURES.
|
|
|
- Jean Chase
- 5 years ago
- Views:
Transcription
1 DESRIPTION APPLIATIONS Telecommunications Telephone hook switch, keyboard applications Domestic appliances Door switch for washing machines, dishwashers, microwave ovens, baking ovens, refrigerators Limit switch for low-power signals Garage door controls, lever hoists, conveyors Lifts / elevators Position indicators MK06 sensors are magnetically operated Reed proximity switches for direct PB mounting. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. (2.54 mm PB pin spacing, available with different distances) FEATURES Form A, B, and E (Latching) available High power switches available Various case sizes available Five operate sensitivities available ORDER INFORMATION MAGNETI SENSITIVITY Series Packaging Size Magnetic Sensitivity Sensitivity lass Pull In AT Range MK06-10 X - X 4 B,, D, E 5 B, B 10-15, H D, I Options 6 B,, D, E 7 B,, D, E E, K (Form A) B,, D, E 8 (Form B) H, I, K Part Number Example Series Form MK06-10 X * Options B E * See footnote on following page. MK is the packaging size is the magnetic sensitivity Part Number Example MK E E selects the latching option 226
2 DIMENSIONS All dimensions in mm [inch] * MK6-10-E is a magnetic latching sensor which is opened or closed by a passing magnet and remains in that state until a magnet of opposite polarity or direction passes by again. The E refers to a latching sensor and does not represent the magnetic sensitivity. MK6-10-B is a normally closed sensor. The B refers to a latching sensor and does not represent the magnetic sensitivity. 227
3 ONTAT DATA All Data at 20 Switch Model Form Packing Style Switch 66 Form A, B, 6, 7, 8, 10 Switch 80 Form A 4 Ratings onditions Min. Typ. Max. Min. Typ. Max. Units Switching Power Any D combination of V & A not to exceed their individual max. s W Switching Voltage D or peak A V Switching urrent D or peak A A arry urrent D or peak A A Static Resistance w/ 0.5 V & 10mA mω Dynamic Resistance Measured w/ 0.5 V & 50mA, 1.5 ms after closure mω Insulation Resistance across s Breakdown Voltage across 100 volts applied * 10 9 Ω Voltage applied for 60 sec. min. 225 * 210 VD Operate Time incl. Bounce Measured w/ 100 % overdrive ms Release Time Measured w/ no coil suppression ms apacitance at 10 khz cross contact pf Operation ** Must Operate ondition Steady state field AT Must Release ondition Steady state field AT Environmental Data Shock Resistance 1/2 sinus wave duration 11 ms g Vibration Resistance From Hz g Ambient Temperature 10 / minute max. allowable o Stock Temperature 10 / minute max. allowable o Soldering Temperature 5 sec o Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of and breakdown voltage of 480 VD is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. onsult factory if more detail is required. 228
4 ONTAT DATA All Data at 20 Switch Model Form Packing Style Switch 87 Form A 5 Switch 90 Form 8 Ratings onditions Min. Typ. Max. Min. Typ. Max. Units Switching Power Any D combination of V & A not to exceed their individual max. s W Switching Voltage D or peak A V Switching urrent D or peak A A arry urrent D or peak A A Static Resistance w/ 0.5 V & 10mA mω Dynamic Resistance Measured w/ 0.5 V & 50mA, 1.5 ms after closure mω Insulation Resistance across s Breakdown Voltage across 100 volts applied Ω Voltage applied for 60 sec. min VD Operate Time incl. Bounce Measured w/ 100 % overdrive ms Release Time Measured w/ no coil suppression ms apacitance at 10 khz cross contact pf Operation ** Must Operate ondition Steady state field AT Must Release ondition Steady state field 4 27 AT Environmental Data Shock Resistance 1/2 sinus wave duration 11 ms g Vibration Resistance From Hz g Ambient Temperature 10 / minute max. allowable o Stock Temperature 10 / minute max. allowable o Soldering Temperature 5 sec o Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of and breakdown voltage of 480 VD is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. onsult factory if more detail is required. 229
5 Mouser Electronics Authorized Distributor lick to View Pricing, Inventory, Delivery & Lifecycle Information: Standex Electronics: MK6-6-D
MEDER electronic. MK24 Series Micro-Miniature Reed Sensors for SMD Mounting DESCRIPTION APPLICATIONS FEATURES MAGNETIC SENSITIVITY ORDER INFORMATION
MEDER electronic MK24 Series DESRIPTION MK24 are the smallest, magnetically operated Reed proximity switches for SMD mounting. Due to the offset design of the internal reed switch leads, the sensing characteristics
DESCRIPTION CHARACTERISTICS FEATURES DIMENSIONS. Molded DIP Reed Relays. Germany # ++49-(0) , USA #
DESRIPTION The DIP series is a very compact design having a low profile package and a high profile package. This series is compatible with all DIP relays. HARATERISTIS FEATURES High resistance option available
MEDER electronic. DIL Series DESCRIPTION FEATURES CHARACTERISTICS. DIMENSIONS All dimensions in mm [inch] ORDER INFORMATION
![MEDER electronic. DIL Series DESCRIPTION FEATURES CHARACTERISTICS. DIMENSIONS All dimensions in mm [inch] ORDER INFORMATION](/thumbs/72/67828129.jpg "MEDER electronic. DIL Series DESCRIPTION FEATURES CHARACTERISTICS. DIMENSIONS All dimensions in mm [inch] ORDER INFORMATION")
kvd Breakdown Option DESRIPTION Several pin out options are possible with the 14 pin DIL series. Suitable for telecommunication applications where breakdown voltages up to 4.25 kvd is required. FEATURES
POST REFLOW HEIGHT DIMENSIONS
MEDER electronic RM Series 4 input / 2 output DESRIPTION The RM05-4A-S-4/2 and RM05-2A2B-S-4/2 are low-profile 4 input / 2 output Relay Modules with an FR-4 substrate and rugged thermoset epoxy overmold.
High Voltage Reed Relays Product Data Sheet
GENERAL INFORMATION DESRIPTION Reed Relays consist of a reed switch and coil fitted into a housing, which could be plastic, metal or moulded. ompared with electromechanical relays, reed relays generally
CUP SERIES CP CLARE 399. Clare Universal Package DESCRIPTION 25 C FEATURES APPLICATIONS APPROVALS ORDERING INFORMATION
DESCRIPTION The Series has become a standard in the European relay market due to its versatile switch and schematic options. The staggered pin layout gives more space and allows for higher isolation from
SUPER MINIATURE PC BOARD TYPE AUTOMOTIVE RELAY
SUPER MINIATURE PC BOARD TYPE AUTOMOTIVE RELAY CJ RELAYS (ACJ) RoHS compliant FEATURES Smallest in its class, it is extremely compact at approx. 2/3 the size of previous products. Compared to our previous
Relay Types. Reed V23100-V4 Relay. Typical applications. Features. DIP version (flat) DIP version (high) SIL version.
1 and 2 pole relays non-polarized, non-latching ROHS compliant (Directive 2002/95/EC) as per product date code 0501. Features Direct coil control with TTL-signals possible Highly reliable switching High
DEVICES SRC. 1" x 0.1" GRID RELAYS HRB MMRB DESCRIPTION APPLICATIONS FEATURES. RATINGS 25 o C)
" x 0." GRID RELAYS DESCRIPTION The " x 0." grid relay series is a general purpose series that is pin-for-pin compatible with most competitor relays. Some configurations of this relay series are capable
DESCRIPTION RATINGS 25 C) Note: For Mechanical Dimensions See Pages
YBERGATE YG2100/YG2110/YG2120 DESRIPTION lare s YG21XX Series DAA modules provide a complete telephone line interface circuit in a small 1.07" x 1.07" x 0.4" package. The modules provide a fast and cost
CUP SERIES Clare Universal Package
DESCRIPTION The CUP Series has become a standard in the European relay market due to its versatile switch and schematic options. The staggered pin layout gives more space and allows for higher isolation
(3) The structure comprises an operating system and electrical circuits coaxially. Reed switches are suited to applications in radio frequency.
E2R-37-22 REED SWITCH ORD228VL General Purpose Miniature (Medium-level Load V Max.) ORD228VL GENERAL DESIPTION The ORD228VL is a small single-contact reed switch designed for general control of mediumlevel
DIP 14 SERIES REED RELAYS
DIP 4 SERIES REED RELAYS MSS MSS7 DSS7 PRME MVS MVS7 DESCRIPTION CP Clare s epoxy molded DIP 4 Series offers a variety of contacts and schematics to meet the needs of a wide range of applications. It features
Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).
Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity
4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).4(W).7(H). High contact capacity: A. Outstanding surge resistance
16A POWER RELAY FOR MICRO WAVE OVEN
VDE 6A POWER RELAY FOR MICRO WAVE OVEN LE RELAYS (ALE) TMP type New FEATURES. Price competitive having better price competitiveness (New 4 mw only) 2. Supports magnetron and heater loads. Switching possible
MCR218-2G, MCR218-4G, MCR218-6G
MCR218-2G, MCR218-4G, MCR218-6G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled,
4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK RoHS compliant FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).34(W).7(H). High contact capacity: A 3. Outstanding
Legacy Printed Circuit Board & Reed Relays. Catalog
Legacy Printed Circuit Board & Reed Relays Catalog 2017 Contents Series Overview....................................................3 117SIP Relays.....................................................4
CONVENTIONAL TYPE REED RELAY EDR0 SERIES
CONVENTIONAL TYPE REED RELAY EDR0 SERIES EDR001 EDR002 EDR003 EDR007 EDR009 EDR010 EDR011 EDR012 EDR013 EDR015 EDR016 EDR018 1 FEATURES EDR0 01, 02, 03, 07, 09, 10, 11, 12, 13, 15, 16 SERIES 2.54 mm IC
Reed Switch Catalogue
Reed Switch Catalogue www.standexelectronics.com 1 Standex Product Offerings: Low-Frequency Magnetics High-Frequency Magnetics Antenna & RF Magnetics Magnetic Reed Switches, Sensors & Relays Hermetic Connector
1a 16A power relay for micro wave oven
VDE 1a power relay for micro wave oven LE RELAYS (ALE) RoHS compliant FEATURES 1. Supports magnetron and heater loads. Capable for switching magnetron and heater loads found in microwave ovens. 2. Excellent
SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
PROTETION PRODUTS Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for
Electromechanical Printed Circuit Board Relays Application Data
Electromechanical Printed Circuit Board Relays Application Data Introduction: In the past several years the dry reed relay has become an important product among relay specifiers, primarily because of the
Load for air conditioner 1a 20A power relays
VDE Load for air conditioner 1a A power relays LF RELAYS (ALF) TMP type PCB type RoHS compliant FEATURES 1. Ideal for compressor and inverter loads 1) Compressor load: A 5V AC ) Inverter load: A V AC,
Ordering Information. Specifications. RF MEMS Switch 2SMES-01. Contact Ratings. Terminal Arrangement. Actuator Ratings
RF MEMS Switch Miniature, 10 GHz Band (typical) SPDT (transfer contacts) RF MEMS Switch Superior high-frequency characteristics at 10 GHz typical/8 GHz rated (50 Ω) Isolation of 30 db Insertion loss of
AUTOMOTIVE RELAY WITH ISO TERMINAL ARRANGEMENT
AUTOMOTIVE RELAY WITH ISO TERMINAL ARRANGEMENT CB RELAYS Compliance with RoHS Directive FEATURES 1. This relay has an ISO (International Organization for Standardization) terminal arrangement. Terminals
Reed Relays - High Voltage
Reed Relays High Voltage SPEIFITIONS ESRIPTION Reed Relays consist of a reed switch and coil fitted into a housing, which could be plastic, metal or moulded. ompared with electromechanical relays, reed
Features. Applications
MIC67 IttyBitty Comparator General Description The MIC67 is a precision voltage comparator with an offset voltage specification of maximum. The MIC67 is designed to operate from a single V to 6V power
RAMSES SERIES R 570 PART NUMBER SELECTION. SPDT up to 18 GHz. Our Most Important Connection is with You. N - TNC - BNC
SPDT up to 18 GHz PART NUMBER SELECTION Frequency Range: 0: N up to 3 GHz 1: N up to 12.4 GHz 2: BNC up to 3 GHz 5: TNC up to 3 GHz 6: TNC up to 12.4 GHz D: TNC up to 18 GHz Type: 1: Failsafe 2: Failsafe
New pin layout (LT type) added. Best seller with broad lineup and AC 2000 V breakdown voltage.
Compliance with RoHS Directive FEATURES. 2, V breakdown between contact and coil The body block construction of the coil that is sealed at formation offers a high breakdown of 2, V between contact and
Type Sealing Poles Contacts Rated voltage Model 5PST-NO, SPST-NC 24 VDC *1
Slim Relays with Forcibly Guided Contacts Conforming to EN Standards EN50205 Class A, approved by VDE. Ideal for use in safety circuits in production machinery. Four-pole and six-pole Relays are available.
Compact Flat Size Relay for Automotive. (Unit: mm inch)
Compact Flat Size Relay for Automotive CP RELAYS Sealed 13.1.1 9..374 13.1.1 1..413 FEATURES Compact flat type PC board terminal type: 9. mm.374 inch Compact and High
RK RELAYS FEATURES. SPECIFICATIONS Contact. 1.5 GHz MICROWAVE RELAY
. GHz MICROWAVE RELAY RK RELAYS..79.. 9.7.3 mm inch FEATURES Excellent high frequency characteristics (Impedance 7Ω) Isolation: db (at. GHz) Insertion loss:.db (at 9 MHz) :. (at 9MHz) High sensitivity
Magnecraft Printed Circuit Board & Reed Relays. Catalog
Magnecraft Printed Circuit Board & Reed Relays Catalog 2010 Contents Series Overview....................................................3 117SIP Relays.....................................................4
MIC833. General Description. Features. Applications. Typical Application. Comparator and Reference with Adjustable Hystersis
Comparator and Reference with Adjustable Hystersis General Description The is a micropower precision dual voltage comparator with an on-chip reference and latch. High- and low-voltage thresholds are adjusted
High switching capacity 1a/1c 30A power relays
Automation Controls Catalog High switching capacity 1a/1c 3A power relays JT-N RELAYS PCB type FEATURES High switching capacity: 3 A for 1 Form A 2 contact arrangements: 1 Form A or TMP types available
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
CP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
20% to 85% (with no icing or condensation) 85% max. (with no icing or condensation)
MEMS Thermal Sensors D6T High Sensitivity Enables Detection of Stationary Human Presence OMRON s unique MEMS and ASIC technologies achieve a high SNR. Superior noise immunity with a digital output. High-precision
4 AMP POLARIZED HIGH DENSITY RELAY WITH HIGH SENSITIVITY FEATURES
4 AMP POLARIZED HIH DENSITY RELAY WITH HIH SENSITIVITY SRELAYS FEATURES 28. 1...472 1.4.49 mm inch A variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available
PCB relay for DC voltage, polarized, monostable or bistable
V23042 PCB relay for DC voltage, polarized, monostable or bistable Features Universally applicable in the most varied circuit functions in the field of telecommunications and small signal technology Versatile
Legacy Printed Circuit Board & Reed Relays. Catalog
Legacy Printed Circuit Board & Reed Relays Catalog 2017 Contents Series Overview....................................................3 117SIP Relays.....................................................4
1.5 GHz MICROWAVE RELAYS. FEATURES 1. Excellent high frequency characteristics. V.S.W.R. (Max.) 1.5 (at 900 MHz) Impedance
1.5 GHz MICROWAVE RELAYS RK RELAYS RoHS compliant FEATURES 1. Excellent high frequency characteristics V.S.W.R. () 1.5 (at 9 MHz) Impedance 5Ω Impedance 75Ω Insertion loss (db. ) Isolation (db. ) V.S.W.R.
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENT RELAY 28. 1.2 12..472.4.49 FEATURE The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High sensitivity
High Sensitivity, with 100mW nominal operating power, in a compact and space saving case
High Sensitivity, with mw nominal operating, in a compact and space saving case GN RELAYS (AGN) RoHS compliant FEATURES. Compact slim body saves space Thanks to the small surface area of.7 mm.6 mm.4 inch.47
HIGH SENSIBILITY RELAY WITH GUARANTEED LOW LEVEL SWITCHING CAPACITY
HIGH SENSIBILITY RELAY WITH GUARANTEED LOW LEVEL SWITCHING CAPACITY SX RELAYS (ASX) 1. FEATURES 1. High contact reliability over a long life has been made possible for low level loads. Using a low level
Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 RD.5G.H4.02 Danfoss A/S (IC-MC/mr), 09-2004 Introduction AKS 32 and AKS 33 are pressure transmitters that
ULTRA LOW PROFILE 2 A POLARIZED RELAY. mm inch. Initial breakdown voltage
TESTING ULTRA LOW PROFILE POLARIZED RELAY RELAYS 9...7 mm inch FEATURES Low profile mm.7 inch height High contact capacity: Surge withstand between contact and coil:, V (Telcordia) RoHS Directive compatibility
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein
HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY
VDE JQ HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY JQ RELAYS.77.39.. mm inch FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw () High
MICRO-ISO AUTOMOTIVE RELAY
MICRO-ISO AUTOMOTIVE RELAY RELAYS Plug-in type PC board type RoHS compliant FEATURES Micro-ISO type terminals Small size: mm(l) mm(w) mm(h). inch(l). inch(l). inch(h) Wide line-up PC board and Plug-in
1a 8A, 1a1b/2a 5A small polarized power relays
a A, ab/a A small polarized power DSP RELAYS Compliance with RoHS Directive FEATURES. Compact with high contact rating Even with small mm. inch (H) mm. inch (W) mm. inch (L) (dimensions, high capacity
1a/1c 5A/10A small power relays
VDE a/c A/A small power relays RELAYS Compliance with RoHS Directive FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:,
ULTRA LOW PROFILE 2 AMP. POLARIZED RELAY. mm inch. Initial breakdown voltage
TESTING ULTR LOW PROFILE MP. POLRIZED RELY TK-RELYS.6.47 9..34 4..7 FETURES Low profile 4 mm.7 inch height High contact capacity: Surge withstand voltage between contact and coil: V (ellcore rating) SPEIFITIS
1a 8A, 1a1b/2a 5A small polarized power relays
Automation Controls Catalog a A, ab/a A small polarized power DSP RELAYS RoHS compliant Protective construction: Sealed type FEATURES. Compact with high contact rating Even with small mm. inch (H) mm.
SAW Components Data Sheet B4926
Features Low-loss IF filter for mobile telephone Channel selection in GSM systems Hermetically sealed ceramic SMD package Balanced and unbalanced operation possible No coupling coil required Terminals
PCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
Distributed by: www.jameco.com 1-8-81-44 The content and copyrights of the attached material are the property of its owner. SLIM POLARIZED RELAY TN RELAYS.551. 9.8.86 FEATURES Small header area makes higher
Distributed by: www.jameco.com 188314242 The content and copyrights of the attached material are the property of its owner. S 4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS 28. 1.12 12..472
T2322B. Thyristors Surface Mount 200V > T2322B TO 225AA CASE 77 STYLE 2. Description
T2322B Pb Description Designed primarily for ac power switching. The gate sensitivity of these triacs permits the use of economical transistorized or integrated circuit control circuits, and it enhances
SUPER MINIATURE TWIN TYPE AUTOMOTIVE RELAY FEATURES
SUPER INIATURE TWIN TYPE AUTOOTIVE RELAY CT RELAYS (ACT) 7.... Twin type ( terminals) 7.. 7... FEATURES Small & slim size Twin type: 7.(L).(W) (H)mm.(L).(W).(H)inch Slim c type: 7.(L) 7.(W) (H)mm.(L).(W).(H)inch
April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
![April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]](/thumbs/89/98743824.jpg "April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s April 2014 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM1608G [0202 inch]* [0603 inch] * Dimensions Code JIS[EIA]
PCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
10 A MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A 1 Form A. Initial breakdown voltage* 2. Vibration resistance.
VDE A MINIATURE POWER RELAY RELAYS a..9.9 SPECIFICATIONS power FEATURES.9 ab.9 Contact, Arrangement Form A Form A Form B Initial contact resistance, ma. (By drop V DC A) mω Contact material Gold flash
Datasheet - BN 20-RZ. Ordering details. Approval. Global Properties :52:27h. Magnetic reed switch / BN 20.
16.08.2014-06:52:27h Datasheet - BN 20-RZ Magnetic reed switch / BN 20 Preferred typ Non-contact principle With pre-wired cable 1 Reed contakts Long life 104 mm x 52 mm x 47 mm Aluminium enlosure Actuating
ACST1635-8FP. Overvoltage protected AC switch. Description. Features. Applications
Overvoltage protected AC switch Description Datasheet production data Features OUT COM TO-220FPAB Enables equipment to meet IEC 61000-4-5 surge with overvoltage crowbar technology High noise immunity against
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY
CV (ACV) Discontinued as of August, AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV)..... Micro ISO c type Micro ISO a type..... Micro plug-in type Micro PCB type Products to be discontinued.
Ordering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications
Latching Relay MMK CSM_MMK_DS_E_1_1 Mechanically Latching Relays Based on the MM Power Relay Low power consumption due to mechanical latch for economic operation. Relays with mixed coil specifications
1 GHz capable, 3 W carrying power (at 1 GHz), 50Ω impedance and 2 Form C relays
1 GHz capable, 3 W carrying power (at 1 GHz), 5Ω impedance and 2 Form C relays RA RELAYS (ARA) 9.7 14.7.382.579 5.9.232 mm inch RoHS compliant Protective construction: Sealed type ORDERING INFORMATION
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV)... Micro ISO c type.. Micro plug-in type Micro ISO a type..... Micro PCB type RoHS Directive compatibility information http://www.nais-e.com/
8 A MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES
A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS FEATURES DSPa.. DSPa DSP.... Power types added to DS relay series High switching capacity: a: A V AC / ab, a: A V AC High sensitivity: mw pick-up power
YL SERIES RELAY LATCH DC COIL 4PDT, LOW LEVEL TO 5 AMP
Magnetic latch operation All weld construction Contact arrangement 4 PDT Qualified to MIL-PRF-6106 PRINCIPLE TECHNICAL CHARACTERISTICS Applicable sockets: SO-1066-001 SM-1002-003 Contacts rated at Low
Suitable for lighting and motor load, 1 Form A 50A latching relays
Suitable for lighting and motor load, 50A latching relays DJ-H RELAYS (ADJH) 9.0 5 1 0.2 9.0 5 New 1 FEATURES 1. High inrush capability Tungsten load (TV-20 class) Electronic ballast load (NEMA10) Capacitive
Normally closed DIP8-pin type of 400V load voltage. FEATURES 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B PhotoMOS units
Normally closed DIP8-pin type of V load voltage GU Form B (AQW) 9.78.8 6. 9.78 6...9.8..6.. (Height includes standoff) FEATURES. Approx. / the space compared with the mounting of Two Form B PhotoMOS units
12mm Rotary Encoder with LED. Pulse 24 / 360. Insulation Resistance (min) Operating Speed (RPM)
Type DPL12 Series Key Features 12mm rotary encoder Incremental type Push switch option Various shaft lengths LED color options Detent Options 12mm rotary incremental encoder with LED for use in electronic
4. Classification E: High capacity. 3. Terminal Form Blank: Tab terminals (#250 terminals) Tab terminals #250 SPST-NO
New Product News G9EJ--E Compact Capable of Switching 4 V A DC loads Actualize a high capacity interruption through the function of extinction of magnetic arc by adopting high-efficiency magnetic circuit.
H11F1M, H11F2M, H11F3M Photo FET Optocouplers
, H11F2M, H11F3M Photo FET Optocouplers Features As a remote variable resistor: 100Ω to 300MΩ 15pF shunt capacitance 100GΩ I/O isolation resistance As an analog switch: Extremely low offset voltage 60
Features. Insulation system F 835-1A-F-C 835-1A-F-S L-1A-C 835L-1A-S F 835L-1A-F-C 835L-1A-F-S NL-1A-C 835NL-1A-S
Type List Terminal style PCB terminal L PCB terminal NL PCB terminal Contact form 1A (SPNO) 1A (SPNO) 1A (SPNO) Insulation system Features Miniature 12A 12VAC, A 20VAC/30VDC PCB Relay. UL/CUL, CSA, TUV,
SERIES KC RELAY NONLATCH 3PDT, 25 AMP
All welded construction Contact arrangement 3 PDT configuration in one inch cube Qualified to MIL-PRF-83536 PRINCIPLE TECHNICAL CHARACTERISTICS Applicable sockets: SO-1057-8912 Contacts rated at 28 Vdc;
REDROCK RR130 TMR DIGITAL SWITCH
REDROCK RR0 TMR DIGITAL SWITCH RedRock RR0 TMR Digital Switch The RedRock 0 Series is an integrated digital magnetic switch ideal for use in medical, industrial, automotive and consumer switching applications.
APT50GT120B2R(G) APT50GT120LR(G)
APT5GT12B2R(G) APT5GT12LR(G) 12V, 5A, (ON) = 3.2V Typical Thunderbolt IGBT The Thunderbolt IGBT is a new generation of high voltage power IGBTs. Using Non-Punch-Through Technology, the Thunderbolt IGBT
LOW-PROFILE SURFACE-MOUNT RELAY
TESTING LOW-PROFILE SURFACE-MOUNT RELAY TQ SMD RELAYS.6. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6. mm.6 inch) Tape and reel
MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
Transistor drive 2c/4c 5A slim power relays
Transistor drive 2c/4c 5A slim power relays RELAYS 4 Flat type () 4 () 2 Flat type () 2 () FEATURES. Compact, slim design Use of high-performance flat electromagnetic design achieves 0.9 mm.429 inch profile,
ermec@ermec.com ermec@ermec.com The data used in this Product Overview may be used as a guideline only. Specific operational characteristics of our products may vary according to individual applications.
PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
Compact Relay Family with Forcibly Guided Contacts
Compact Relay Family with Forcibly Guided Contacts SF-Y RELAYS -pole ( Form A Form B, Form A Form B) -pole ( Form A Form B, 5 Form A Form B) RoHS compliant FEATURES. Forcibly guided contact structure Relay
ACST310-8B. Overvoltage protected AC switch. Description. Features. Applications. Benefits
Overvoltage protected AC switch Datasheet production data Features AC switch with self over voltage protection Microcontroller direct driven (low gate current max. 10 ma) Three quadrants (Q1, Q2 and Q3)
8 A MINIATURE POWER RELAY IN DS RELAY SERIES
A MINIATURE POWER RELAY IN DS RELAY SERIES RELAYS FEATURES. Compact with high contact rating Even with small mm. inch (H) mm. inch (W) mm. inch (L) (dimensions, high capacity switching is provided: a,
Two-way Action Test Button (Models with Lockable Test Button) For Momentary Operation
General Purpose Relays MKS Exceptionally Reliable General Purpose Relay now available with Lockable Test Button IEC Rating of A 0 V AC 0/0 Hz, General use 100,000 cycles. Mechanical indicator standard
600V APT75GN60B APT75GN60BG*
G C E TYPICAL PERFORMANCE CURVES APT75GNB(G) V APT75GNB APT75GNBG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. Utilizing the latest Field Stop and Trench Gate technologies, these IGBT's have ultra
VI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY FEATURES
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV) Micro ISO c type Micro ISO a type Micro plug-in type Micro PCB type FEATURES Low profile:. mm(l) mm(w). mm(h) inch(l). inch(w). inch(h) Low
6x6 mm Thinner Type Tactile Switches (Pitch 4.5 mm) ACTUATOR COLOR & OPERATING FORCE: Black, 100gf Brown, 160gf Red, 260gf
TP6GM... TP6GMB... 2.5 TP6M... General Tolerance ±0.2mm How to order: TP6 1 2 3 5 6 7 1 GROUND TERMINAL: Blank Without Ground Terminal G With Ground Terminal 5 A K C ACTUATOR COLOR & OPERATING FORCE: Black,
TELEFILTER Filter Specification TFS 141 C 1/5
TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV) Micro ISO c type Micro ISO a type Micro plug-in type Micro PCB type FEATURES Low profile:. mm(l) mm(w). mm(h). inch(l). inch(w). inch(h) Low
MIL-PRF-83536/5C 08 June 2010 SUPERSEDING MIL-PRF-83536/5B 04 December 2008 PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/5C 08 June 2010 SUPERSEDING MIL-PRF-83536/5B 04 December 2008 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 5 AMPERES, PERMANENT
LOW V CE(SAT) PNP SURFACE MOUNT TRANSISTOR
DPLS16 LOW V E(ST) PNP SURFE MOUNT TRNSISTOR NEW PRODUT Features Epitaxial Planar Die onstruction omplementary NPN Type vailable (DNLS16) Surface Mount Package Suited for utomated ssembly Lead Free/RoHS
ATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.
orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO7637-2 5a