DInGaAs Series. Spectroscopy Detectors PROFESSIONAL DINGAAS SERIES DETECTORS DINGAAS SERIES TE COOLED INGAAS DETECTORS
|
|
- Asher Eaton
- 5 years ago
- Views:
Transcription
1 DInGaAs Series DINGAAS SERIES COOLED INGAAS DECTORS cooled InGaAs detectors, spectral range from 0.8 μm to 2.6 μm. DInGaAs(x) detectors have the same construction. And x-1700/ 1900/ 2200/ 2400/ 2600 all use import two stage cooled InGaAs detectors. Spectral response curve see below. PROFESSIONAL DInGaAs series Detectors are room temperature, high performance. InGaAs detectors operating over the NIR range from 0.8 μm to 1.7 μm. The three kinds of DInGaAs1600, DInGaAs1650, DInGaAs1700 detectors have the same construction design. DInGaAs1600 built-in small area InGaAs Detection device (See Fig.1). DInGaAs1650 built-in large area InGaAs Detection device (See Fig.2). DInGaAs1700 built-in import large area InGaAs Detection device (See Fig.3). Fig. 1. DInGaAs 1700 InGaAs - Fig. 2. DInGaAs 1650 Fig. 3. DInGaAs 1600
2 PARAMER DINGAAS1600 DINGAAS1650 MIN TYP MAX DINGAAS 1700 Active Diameter Spectral Range mm nm Re A / W VR = 0V VR =0V VR = 10V VR =0V nm Dark current VR = 0V VR = 0V 5 10 Io (na) NEP ˉ¹³ 0.3 pw Hz- 1/2 Signal Output Current Current Current SPECIFICATIONS DINGAAS1700 DINGAAS1900 DINGAAS2200 DINGAAS2400 DINGAAS2600 Active size Diameter mm Spectral Range nm Peak Responsivity A / W Peak D* (cmhz½ / 1KHz typ NEP (W / Peak Wavelength typ ¹¹ ¹² ¹² ¹¹ ¹¹ ˉ¹³ ˉ¹⁴ ˉ¹³ ˉ¹³ ˉ¹³ pw Hz- 1/2 Temperature Controller ZTC ZTC ZTC ZTC ZTC Signal Output Current Current Current Current Current C Operating Temperature C Temperature Stability ± 0.5 ± 0.5 ± 0.5 ± 0.5 ± 0.5 C Ambient Temperature C Gilden Photonics Ltd has a policy of continuous product development and reserves the right to amend specifications without prior notice. E & OE.
3 DInGaAs Series SPECIFICATIONS DINGAAS1700 DINGAAS1900 DINGAAS2200 DINGAAS2400 DINGAAS2600 Signal Output Current Current Current Current Current C Output Signal Polarity P P P P P - Remarks In the cooled mode, the detectors must be working with temperature controller (ZTC) - Tranc-impedance amplifier ZAMP is recommended DInGaAs DECTORS APPLICATION ADVICES DInGaAs series and DInGaAs- series detectors are current output mode, before connecting to the signal processors such as oscilloscope or lock-in amplifier, the IV Tranc-impedance Amplifier ZAMP is proposed to be connected as a preamp and which can convert the current signal to voltage signal. If the signal processor indicates that it can be input current signal, you can connect the detectors to the signal processors directly. In order to improve the detection sensitivity, the IV Tranc- impedance Amplifier is recommended. DInGaAs series and DInGaAs- series detectors used with the DCS103 data acquisition system, the IV Tranc-impedance Amplifier is recommended in order to improve the detection sensitivity. DInGaAs series and DInGaAs- series detectors used with the DCS300PA data acquisition system, as signal amplifier has been integrated in the DCS300PA dual-channel; it does not need to match a preamplifier. In the cooled mode, DInGaAs- series detectors must work with Temperature controller (ZTC) for cooling control.
4 DInGaAs 1600 / 1700 DInGaAs 1700 DInGaAs 1650 DInGaAs 1600 PARAMER DINGAAS1600 DINGAAS1650 DINGAAS 1700 Active Diameter Spectral Range mm nm Re A / W VR = 0V VR =0V VR = 10V VR =0V nm Dark current VR = 0V VR = 0V 5 10 Io (na) NEP ˉ¹³ 0.28 pw Hz- 1/2 Signal Output Current Current Current Gilden Photonics Ltd has a policy of continuous product development and reserves the right to amend specifications without prior notice. E & OE.
5 DInGaAs 2400 / 2600 DInGaAs series Detectors are room temperature high performance InGaAs detectors operating over the NIR spectral range from approximately 0.8 μm to 1.7 μm. Each unit is compatible with the Omni series output slit. Cooled InGaAs detectors InGaAs detector spectral range is from 0.8 μm to 2.6 μm. DInGaAs(x)- detectors are slit mount design and match with all Omni series output slit. And x-1700/ 1900/ 2200/ 2400/ 2600 all use two stage cooled InGaAs detectors. Spectral response curve see below. PARAMER DINGAAS DINGAAS Active size Diameter 3 3 mm Spectral Range nm Peak Responsivity A / W Peak D* (cmhz½ / 1KHz typ NEP (W / Peak Wavelength typ ¹¹ ¹¹ ˉ¹³ ˉ¹³ pw Hz- 1/2 Temperature Controller ZTC ZTC Operating Temperature C Temperature Stability ± 0.5 ± 0.5 C Ambient Temperature C Signal Output Current Current C Output Signal Polarity P P Remarks The detectors must work with temperature controller model ZTC ZPA 7 - Trans - Impedance Amplifier is recommended
6 DInGaAs 3800 PARAMER DINGAAS 3800 DINGAAS Active Diameter 2 2 mm Spectral Range μm Re A / W D* (@ λpeak, 1KHz)cm ⁹ ¹² Hz½ Wˉ¹ NEP (@ λpeak, 1KHz)p W Hz½ Temperature Model - ZTC - 2 Detector Temperature Room temperature -40 C Temperature Stability - ± 0.5 C Signal Output Mode Current Current Signal Output Level P P Gilden Photonics Ltd has a policy of continuous product development and reserves the right to amend specifications without prior notice. E & OE.
7 DPbs Series PBS DECTOR Room temperature IR detectors, spectral range from 0.8 to 3.2 μm. DPbS2900 and DPbS3200 have the same construction (built-in preamplifier). DPbS2900 using the import PbS Detectors( Spectral response curve see Fig.1) DPbS3200 using the general PbS Detectors( Spectral response curve see Fig.2) Fig. 1 Fig. 2 PBS DECTORS APPLICATION ADVICES DPbS 2900 and DPbS 3200 are the photoconductive IR detectors, which must be used with lock-in amplifier. SR 830 or Model 420 is recommended DPbS 2900 and DPbS 3200 detectors integrate the preamplifier, the detectors output signals are voltage signals. When working with DCS 103 or DCS 300PA, the detectors needs choosing voltage signal as the sampling mode DPBS SPECIFICATION DPBS 2900 LSP-X150 Active Size dpbs mm Spectral Range μm Peak Wavelength μm Su 3 10⁴ 300 V /W Rd MΩ D 5 10⁸ 1 10⁸ cm (Hz)½ / W Time Constant μs Magnification 1, 10, Input Offset Voltage < ± 1 μv Preamplifier Input Drift ± 1 μv Frequency Response Range (400 Hz recommended) Hz Signal Input voltage voltage - Output Signal Polarity P P -
Near-Infrared (NIR) Photodiode
Photosensitivity, A/W Capacitance, pf Photosensitivity, A/W Current, ma Near-Infrared (NIR) Photodiode Lms25PD-10 series Device parameters Symbol Value Units Sensitive area diameter Reverse voltage V r
More informationStandard InGaAs Photodiodes IG17-Series
Description The IG17-series is a panchromatic PIN photodiode with a nominal wavelength cut-off at 1.7 µm. This series has been designed for demanding spectroscopic and radiometric applications. It offers
More informationNear-Infrared (NIR) Photodiode
Photosensitivity, A/W Photosensitivity, A/W Current, ma Near-Infrared (NIR) Photodiode Lms24PD-03 series Device parameters Symbol Value Units Sensitive area size Reverse voltage Operating/ storage temperature
More informationVariable Gain Photoreceiver - Fast Optical Power Meter
The picture shows model -FC with fiber optic input. Features Conversion gain switchable from 1 x 10 3 to 1 x 10 11 V/W InGaAs-PIN detector Spectral range 900-1700 nm Calibrated at 1550 nm (fiber optic
More informationMid-Infrared (MIR) Photodiode
Photosensitivity, A/W Photosensitivity, A/W Current, ma Mid-Infrared (MIR) Photodiode Lms41PD-3 series Device parameters Symbol Value Units Sensitive area size Reverse voltage Operating/ storage temperature
More informationExtended InGaAs Photodiodes IG22-Series
Description The IG22-series is a panchromatic PIN photodiode with a nominal wavelength cut-off at 2.2 µm. This series has been designed for demanding spectroscopic and radiometric applications. It offers
More informationVariable Gain Photoreceiver Fast Optical Power Meter
The picture shows model -FC with fiber optic input. Features Si-PIN detector, active area 1.1 x 1.1 mm 2 Spectral range 190-1000 nm Very low noise, NEP down to 17 fw/ Hz Bandwidth up to 500 khz Conversion
More informationVariable Gain Photoreceiver Fast Optical Power Meter
The picture shows model -FC with fiber optic input. Features InGaAs-PIN detector, active diameter 0.3 mm (free space versions), 80 µm integrated ball lens (FC version) Spectral range 900-1700 nm Very low
More informationMid-Infrared (MIR) Photodiode
Photosensitivity, A/W Capacitance, pf Photosensitivity, A/W Current, ma Mid-Infrared (MIR) Photodiode Lms36PD-03 series Device parameters Symbol Value Units Sensitive area size Reverse voltage Operating/
More informationP-CUBE-Series High Sensitivity PIN Detector Modules
High Sensitivity PIN Detector Modules Description The P-CUBE-series manufactured by LASER COMPONENTS has been designed for customers interested in experimenting with low noise silicon or InGaAs pin detectors.
More information200 MHz Variable Gain Photoreceiver
The image shows model -FST with 1.035-40 threaded flange and coupler ring. Features Applications Adjustable transimpedance gain from 10 2 to 10 8 V/A Wide bandwidth up to 200 MHz Si-PIN photodiode covering
More informationNON-AMPLIFIED PHOTODETECTOR USER S GUIDE
NON-AMPLIFIED PHOTODETECTOR USER S GUIDE Thank you for purchasing your Non-amplified Photodetector. This user s guide will help answer any questions you may have regarding the safe use and optimal operation
More informationA-CUBE-Series High Sensitivity APD Detector Modules
Series Description Laser Components new A-CUBE range of APD modules has been designed for customers interested in experimenting with APDs. Featuring a low-noise silicon (or InGaAs) APD with matched preamplifier
More informationINGAAS FAST PIN (RF) AMPLIFIED PHOTODETECTORS
INGAAS FAST PIN (RF) AMPLIFIED PHOTODETECTORS High Signal-to-Noise Ratio Ultrafast up to 9.5 GHz Free-Space or Fiber-Coupled InGaAs Photodetectors Wavelength Range from 750-1650 nm FPD310 FPD510-F https://www.thorlabs.com/newgrouppage9_pf.cfm?guide=10&category_id=77&objectgroup_id=6687
More informationGermanium Detectors and Position Sensors
Germanium Detectors and Position Sensors Judson Technologies LLC 221 Commerce Drive Montgomeryville, PA 18936 USA Tel: 215-368-6900 Fax: 215-362-67 ISO 9001 Certified Visit us on the web. www.judsontechnologies.com
More informationPGS Family Plane Grating Spectrometer from ZEISS
PGS Family Plane Grating Spectrometer from ZEISS 2 PGS Family the NIR specialists The spectrometers of the PGS family are designed for use in the NIR. InGaAs (indium-galliumarsenide) is used as a detector
More informationphotodiodes Description PerkinElmer Optoelectronics offers a broad array of Silicon and InGaAs PIN and APDs.
photodiodes Features Low-cost visible and near-ir photodetector Excellent linearity in output photocurrent over 7 to 9 decades of light intensity Fast response times Available in a wide range of packages
More informationShunt Resistance and Dark Current Device Selection Linearity 司 先锋科技股份有限公司 When the detector is used in the basic c
J16 Germanium Detector Operating Notes (0.8 to 1.8 µm) 司 www.detecto 先锋科技股份有限公司 www.detecto公司 www.detec General J16 Series detectors are high-quality Germanium photodiodes designed for the 800 to 1800
More informationGreat Britain: LASER COMPONENTS (UK) Ltd., Phone: , Fax: , France: LASER COMPONENTS
F E M T O P H O T O R E C E I V E R O V E R V I E W 2 0 0 5 S O P H I S T I C A T E D T O O L S F O R S I G N A L R E C O V E R Y Selection Guide Photoreceivers Model Spectral Calibration Bandwidth Min.
More informationMDS-3 EVALUATION SYSTEM FOR METHANE DETECTION INSTRUCTION MANUAL
MDS-3 EVALUATION SYSTEM FOR METHANE DETECTION INSTRUCTION MANUAL rev. 281014 TABLE OF CONTENTS General Information 3 Application 3 Packaging arrangement 3 Operation conditions 3 Brief Overview of the Components
More informationHigh-Speed Photoreceiver with Si PIN Photodiode
The photoreceiver will be delivered without post holder and post Features Si PIN Detector, 0.8 mm Active Diameter Spectral Range 320... 1000 nm Bandwidth DC... 200 MHz Amplifier Transimpedance (Gain) 2.0
More informationMid-Infrared (MIR) Photodiode
Current, ma Capacitance, pf Sensitivity, a.u. Sensitivity, a.u. Lms24PD-05 series Device parameters Symbol Value Units Sensitive area diameter d 0.5 mm Storage temperature T stg -50..+60* C Operating temperature
More information400 MHz Photoreceiver with InGaAs PIN Photodiode
The picture shows the -FS with free space input. The photoreceiver will be delivered without post holder and post. Features InGaAs PIN detector Spectral range 900... 1700 nm Bandwidth DC... 400 MHz Amplifier
More informationWorking in Visible NHMFL
Working in Visible Optics @ NHMFL NHMFL Summer School 05-19-2016 Stephen McGill Optical Energy Range Energy of Optical Spectroscopy Range SCM3 Optics Facility Energy Range of Optical Spectroscopy SCM3
More informationNON-AMPLIFIED HIGH SPEED PHOTODETECTOR USER S GUIDE
NON-AMPLIFIED HIGH SPEED PHOTODETECTOR USER S GUIDE Thank you for purchasing your Non-amplified High Speed Photodetector. This user s guide will help answer any questions you may have regarding the safe
More informationeasypll UHV Preamplifier Reference Manual
easypll UHV Preamplifier Reference Manual 1 Table of Contents easypll UHV-Pre-Amplifier for Tuning Fork 2 Theory... 2 Wiring of the pre-amplifier... 4 Technical specifications... 5 Version 1.1 BT 00536
More informationMercury Cadmium Telluride Detectors
Mercury Cadmium Telluride Detectors ISO 9001 Certified J15 Mercury Cadmium Telluride Detectors (2 to 26 µm) General HgCdTe is a ternary semiconductor compound which exhibits a wavelength cutoff proportional
More informationAmplified Photodetectors
Amplified Photodetectors User Guide (800)697-6782 sales@eotech.com www.eotech.com Page 1 of 6 EOT AMPLIFIED PHOTODETECTOR USER S GUIDE Thank you for purchasing your Amplified Photodetector from EOT. This
More information200 MHz Photoreceiver with Si PIN Photodiode
The picture shows the -FS with free space input. The photoreceiver will be delivered without post holder and post. Features Si PIN Detector, 0.8 mm Active Diameter Spectral Range 320... 1000 nm Bandwidth
More informationIR Detectors - B Series High Performance Lead Selenide (PbSe) Single Channel UnCooled and Cooled Devices
IR s - B Series High Performance Lead Selenide (PbSe) Single Channel UnCooled and Cooled Devices Key Features Fast high sensitivity in -5 micron region Provides high signal to noise performance for wide
More informationLow Noise Variable Gain Low Frequency Voltage Amplifier
Features Variable Gain 40 to 100 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 100 Ω Very Low Input Voltage Noise: 700 pv/ Hz DC-Coupled, Single
More informationCooled 10pin butterfly 980nm Pump Laser Module. Applications
Cooled 10pin butterfly 980nm Pump Laser Module Features High output power, up to 600mW kink free Single-mode fiber pigtail Fiber Bragg grating stabilization for wavelength locking over the entire operating
More informationInGaAs Avalanche Photodiode. IAG-Series
InGaAs Avalanche Photodiode IAG-Series DESCRIPTION The IAG-series avalanche photodiode is the largest commercially available InGaAs APD with high responsivity and extremely fast rise and fall times throughout
More informationFirst Sensor PIN PD Data Sheet Part Description PC5-7 TO Order #
Responsivity () Part Description PC5-7 TO Order # 51285 Features Description Application RoHS 5 mm² PIN detector Low dark current High shunt resistance High sensitivity Fully depleteble Circular active
More informationDual operational amplifier
DESCRIPTION The 77 is a pair of high-performance monolithic operational amplifiers constructed on a single silicon chip. High common-mode voltage range and absence of latch-up make the 77 ideal for use
More informationPA9 should be used where high. has preamplifiers for optimum performance with each detector type. Teledyne. Detector Shunt. Impedance (ohms) 1 to 500
PB October ecommended Preamplifiers Operating Circuit The PA5, PA6 and PA7 have The recommended operating adjustable gain and low noise. circuit for most applications is an Preamplifiers should be picked
More informationQUAD 5V RAIL-TO-RAIL PRECISION OPERATIONAL AMPLIFIER
ADVANCED LINEAR DEVICES, INC. ALD472A/ALD472B ALD472 QUAD 5V RAILTORAIL PRECISION OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The ALD472 is a quad monolithic precision CMOS railtorail operational amplifier
More informationMDS-4 ON-BOARD EVALUATION SYSTEM
Electro Optical Components, Inc. 5464 Skylane Boulevard, Suite D, Santa Rosa, CA 95403 Toll Free: 855-EOC-6300 www.eoc-inc.com info@eoc-inc.com MDS-4 ON-BOARD EVALUATION SYSTEM FOR METHANE DETECTION INSTRUCTION
More informationNon-amplified Photodetectors
Non-amplified Photodetectors User Guide (800)697-6782 sales@eotech.com www.eotech.com Page 1 of 9 EOT NON-AMPLIFIED PHOTODETECTOR USER S GUIDE Thank you for purchasing your Non-amplified Photodetector
More informationMDK EVALUATION KIT FOR METHANE DETECTION INSTRUCTION MANUAL. rev
MDK EVALUATION KIT FOR METHANE DETECTION INSTRUCTION MANUAL rev. 250516 TABLE OF CONTENTS General Information 3 Application 3 Packaging arrangement 3 Operation conditions 3 Brief overview of the components
More informationInGaAs PIN photodiodes
area from ϕ0.3 mm to ϕ5 mm InGaAs PIN photodiodes have large shunt resistance and feature very low noise. Hamamatsu provides various types of InGaAs PIN photodiodes with photosensitive area from ϕ0.3 mm
More informationVariable Gain Low Frequency Voltage Amplifier
Features Applications 20 to 80 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 1 kω Single Ended and True Differential Input Models Bandwidth DC -
More informationDual operational amplifier
Dual operational amplifier The BA8, BA8F, and BA8N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These
More informationWhat Kind of Application Do You Have?
f e m t o P R O D U C T o v e r v i e w S o p h i s t i c a t e d T o o l s f o r S i g n a l R e c o v e r y FEMTO Amplifier selection guide What Kind of Application Do You Have? Amplification of Small
More information400 MHz Photoreceiver with Si PIN Photodiode
The picture shows the -FS. The photoreceiver will be delivered without post holder and post. Features Si PIN Detector, 0.8 mm Active Diameter Spectral Range 320... 1000 nm Bandwidth DC... 400 MHz Amplifier
More informationCompatible with Windows 8/7/XP, and Linux; Universal programming interfaces for easy custom programming.
NIRvana: 640LN The NIRvana: 640LN from Princeton Instruments is a scientific-grade, deep-cooled, large format InGaAs camera for low-light scientific SWIR imaging and spectroscopy applications. The camera
More informationHIGH SPEED FIBER PHOTODETECTOR USER S GUIDE
HIGH SPEED FIBER PHOTODETECTOR USER S GUIDE Thank you for purchasing your High Speed Fiber Photodetector. This user s guide will help answer any questions you may have regarding the safe use and optimal
More information1.5µm PbSe Power Detector
1.5µm PbSe Power Detector User Guide (800)697-6782 sales@eotech.com www.eotech.com Page 1 of 7 EOT 1.5-5µm PbSe POWER DETECTOR USER S GUIDE Thank you for purchasing your 1.5-5µm PbSe Power Detector from
More informationTSL267 HIGH-SENSITIVITY IR LIGHT-TO-VOLTAGE CONVERTER TAOS033E SEPTEMBER 2007
TSL267 Integral Visible Light Cutoff Filter Converts IR Light Intensity to Output Voltage Monolithic Silicon IC Containing Photodiode, Operational Amplifier, and Feedback Components High Sensitivity Single
More information10-MHz Adjustable Photoreceivers Models 2051 & 2053
USER S GUIDE 10-MHz Adjustable Photoreceivers Models 2051 & 2053 2584 Junction Avenue San Jose, CA 95134-1902 USA phone: (408) 919 1500 e-mail: contact@newfocus.com www.newfocus.com Warranty New Focus,
More informationDC to 3.5-GHz Amplified Photoreceivers Models 1591 & 1592
USER S GUIDE DC to 3.5-GHz Amplified Photoreceivers Models 1591 & 1592 These photoreceivers are sensitive to electrostatic discharges and could be permanently damaged if subjected even to small discharges.
More informationVariable-Gain High Speed Current Amplifier
Features Transimpedance (gain) switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper cut-off frequency switchable to 1 MHz, 10 MHz or full bandwidth Switchable AC/DC coupling Adjustable
More informationTIA-3000 Optical / Electrical Converter Operating Instructions
TIA-3000 Optical / Electrical Converter Operating Instructions Contents Introduction...1 Specifications...2 Unpackaging and Inspection...3 Battery Replacement...3 Setup...4 Operating Considerations...5
More informationOE Converter Line-up Easy & Cost-Effective Opto Electronic Instrumentation
OE Converter Line-up Easy & Cost-Effective Opto Electronic Instrumentation Feature Optical to Electrical Conversion in Analog with Wide Bandwidth. Large Acceptable Core Diameter and Fiber NA. Compact Size.
More informationPhotops. Photodiode-Amplifier Hybrids
Photops Photodiode-Amplifier Hybrids The Photop Series, combines a photodiode with an operational amplifier in the same package. Photops general-purpose detectors have a spectral range from either 350
More informationDual Precision, Low Cost, High Speed BiFET Op Amp AD712-EP
Dual Precision, Low Cost, High Speed BiFET Op Amp FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +125 C) Controlled manufacturing baseline One
More informationDC to 12-GHz Amplified Photoreceivers Models 1544-B, 1554-B, & 1580-B
USER S GUIDE DC to 12-GHz Amplified Photoreceivers Models 1544-B, 1554-B, & 1580-B Including multimode -50 option These photoreceivers are sensitive to electrostatic discharges and could be permanently
More informationams AG TAOS Inc. is now The technical content of this TAOS datasheet is still valid. Contact information:
TAOS Inc. is now The technical content of this TAOS datasheet is still valid. Contact information: Headquarters: Tobelbaderstrasse 3 84 Unterpremstaetten, Austria Tel: +43 () 336 5 e-mail: ams_sales@ams.com
More informationTSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C JUNE 2006
Converts Light Intensity to Output Voltage Integral Color Filter in Blue, Green, or Red Monolithic Silicon IC Containing Photodiode, Operational Amplifier, and Feedback Components High Sensitivity Single
More informationSGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE)
SGM814 PRODUCT DESCRIPTION The SGM814 is a PIR sensor and vibration sensor analog front end which consists of 2 independent building block circuits. One is a dual rail-to-rail input and output operational
More informationInGaAs PIN photodiodes
area from ϕ0.3 mm to ϕ5 mm InGaAs PIN photodiodes have large shunt resistance and feature very low noise. Hamamatsu provides various types of InGaAs PIN photodiodes with photosensitive area from ϕ0.3 mm
More informationSegmented Photodiodes (SPOT Series)
Segmented Photodiodes (SPOT Series) Position Sensing Detector (PSD) The SPOT Series are common substrate photodetectors segmented into either two (2) or four (4) separate active areas. They are available
More informationLow Noise Variable Gain Low Frequency Voltage Amplifier
Measurement Features Variable Gain 40 to 100 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 100 Ω Very Low Input Voltage Noise: 700 pv/ Hz DC-Coupled,
More informationSGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,
More informationSilicon Avalanche Photodiode SAE-Series (NIR-Enhanced)
Silicon Avalanche Photodiode SAE-Series (NIR-Enhanced) Description The SAE230NS and SAE500NS epitaxial avalanche photodiodes are general purpose APDs with high responsivity and extremely fast rise and
More informationIRM-8607K-2. Infrared Remote Control Receiver Module. Features. Description. Applications. Block Diagram. Application Circuit
Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against
More informationSGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers
/SGM8957-2 1.8V, Micro-Power CMOS PRODUCT DESCRIPTION The single and dual SGM8957-2 CMOS operational amplifiers provide very low offset voltage and zero-drift over time and temperature. The miniature,
More informationSIGNAL RECOVERY. Model 7265 DSP Lock-in Amplifier
Model 7265 DSP Lock-in Amplifier FEATURES 0.001 Hz to 250 khz operation Voltage and current mode inputs Direct digital demodulation without down-conversion 10 µs to 100 ks output time constants Quartz
More informationOptical Communications
Optical Communications Telecommunication Engineering School of Engineering University of Rome La Sapienza Rome, Italy 2005-2006 Lecture #4, May 9 2006 Receivers OVERVIEW Photodetector types: Photodiodes
More informationSPMMicro. SPMMicro. Low Cost High Gain APD. Low Cost High Gain APD. Page 1
SPMMicro Page 1 Overview Silicon Photomultiplier (SPM) Technology SensL s SPMMicro series is a High Gain APD provided in a variety of miniature, easy to use, and low cost packages. The SPMMicro detector
More informationINTEGRATED CIRCUITS DATA SHEET. TEA5591 AM/FM radio receiver circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 June 1989 GENERAL DESCRIPTION The is an integrated radio circuit which is designed for use in portable receivers and clock radios. The
More informationDual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
www.burr-brown.com/databook/.html Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 25V/µs WIDE GAIN-BANDWIDTH: MHz UNITY-GAIN STABLE
More informationSGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers
/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers GENERAL DESCRIPTION The (single), SGM358 (dual) and SGM324 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers.
More informationLM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
More informationMTCSiCS. Integral True Colour Sensor LCC with IR blocking 1 FUNCTION APPLICATION FEATURES CONSTRUCTION...3
The information disclosed herein was originated by and is the property of MAZeT. MAZeT reserves all patent, proprietary, design, use, sales, manufacturing an reproduction rights thereto. Product names
More informationPhotonics Devices 619 TEL : (03) ( 桃園 - 總公司 ) / (04) ( 台中 ) / (06) ( 台南 )
619 TEL : (03)462-6569 ( 桃園 - 總公司 ) / (04)2261-0357 ( 台中 ) / (06)208-6651 ( 台南 ) Photodiodes... Photodetectors... Optical Isolators...... Modules... Rotating Laser Target System... Laser Alignment System......
More informationDetector-Filter Combination Series
Detector-Filter Combination Series Planar Diffused Silicon Photodiodes The Detector-Filter combination series incorporates a filter with a photodiode to achieve a tailored spectral response. OSI Optoelectronics
More informationLow Noise Variable Gain Low Frequency Voltage Amplifier
Features Variable Gain 40 to 100 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 100 Ω Very Low Input Voltage Noise: 700 pv/ Hz DC-Coupled, Single
More informationSGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers
/2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into
More informationDESCRIPTION. The LUMENOLOGY Company Texas Advanced Optoelectronic Solutions Inc. 800 Jupiter Road, Suite 205 Plano, TX (972)
Converts Light Intensity to Output Voltage Integral Color Filter in Blue, Green, or Red Monolithic Silicon IC Containing Photodiode, Operational Amplifier, and Feedback Components High Sensitivity Single
More informationInAs photovoltaic detectors
P9 series P763 Low noise, high reliability infrared detectors (for 3 μm band) InAs photovoltaic detectors have high sensitivity in the infrared region around 3 μm as with PbS photoconductive detectors,
More informationLF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier
LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed
More informationLF411 Low Offset, Low Drift JFET Input Operational Amplifier
Low Offset, Low Drift JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed input
More informationHigh-Power Femtosecond Lasers
High-Power Femtosecond Lasers PHAROS is a single-unit integrated femtosecond laser system combining millijoule pulse energies and high average power. PHAROS features a mechanical and optical design optimized
More informationIRM X. Infrared Remote Control Receiver Module. Release Date: :04:18.0 Expired Period: Forever. Features. Description.
Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against
More informationCA3140, CA3140A. 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output. Description. Features. Applications. Ordering Information
November 99 SEMICONDUCTOR CA, CAA.MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output Features MOSFET Input Stage - Very High Input Impedance (Z IN ) -.TΩ (Typ) - Very Low Input Current (I
More informationTL082 Wide Bandwidth Dual JFET Input Operational Amplifier
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
More informationLF353 Wide Bandwidth Dual JFET Input Operational Amplifier
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
More informationType Ordering Code Package TAA 762 A Q67000-A2271 P-DIP-6-1 TAA 762 G Q67000-A2273 P-DSO-6-1 (SMD) TAA 765 A Q67000-A524 P-DIP-6-1
Single Operational Amplifiers TAA 762 Bipolar IC Features Wide common-mode range Large supply voltage range Large control range Wide temperature range (TAA 762) High output frequency compensation Open
More informationLF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More informationTSL250RD, TSL251RD, TSL260RD, TSL261RD LIGHT-TO-VOLTAGE OPTICAL SENSORS
Monolithic Silicon IC Containing Photodiode, Operational Amplifier, and Feedback Components Converts Light Intensity to a Voltage High Irradiance Responsivity, Typically 64 mv/(w/cm 2 ) at p = 640 nm (TSL250RD)
More informationData Sheet. MCSi. Integral 3-Element Colour Sensor 1 FUNCTION 2 2 APPLICATION 2 3 FEATURES 2 4 CONSTRUCTION 2 5 MAXIMUM RATINGS / CHARACTERISTICS 3
The information disclosed herein was originated by and is the property of MAZeT. MAZeT reserves all patent, proprietary, design, use, sales, manufacturing an reproduction rights thereto. Product names
More informationLM725 Operational Amplifier
LM725 Operational Amplifier General Description The LM725/LM725A/LM725C are operational amplifiers featuring superior performance in applications where low noise, low drift, and accurate closed-loop gain
More informationC30659 Series 900/1060/1550/1550E Si and InGaAs APD Preamplifier Modules
DATASHEET Photon Detection C3659 Series 9/6/15/15E Excelitas C3659-15E InGaAs APD Preamplifier Modules exhibit enhanced damage threshold and greater resilience when exposed to higher optical power densities.
More informationVariable-Gain High Speed Current Amplifier
Features Transimpedance (Gain) Switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper Cut-Off Frequency Switchable to 1 MHz, 10 MHz or Full Bandwidth Switchable AC/DC Coupling Adjustable
More informationLF442 Dual Low Power JFET Input Operational Amplifier
LF442 Dual Low Power JFET Input Operational Amplifier General Description The LF442 dual low power operational amplifiers provide many of the same AC characteristics as the industry standard LM1458 while
More information80-MHz Balanced Photoreceivers Model 18X7
USER S GUIDE 80-MHz Balanced Photoreceivers Model 18X7 2584 Junction Ave. San Jose, CA 95134-1902 USA phone: (408) 919 1500 e-mail: contact@newfocus.com www.newfocus.com Warranty New Focus, Inc. guarantees
More informationUltra Low-Noise Variable Gain Low-Frequency Voltage Amplifier
Features Variable gain 40 to 100 db, switchable in 20 db steps Bipolar input stage, recommended for low impedance sources smaller than 50 Ω Ultra low input voltage noise: 400 pv/ Hz AC coupled, single
More informationTSL253R LIGHT-TO-VOLTAGE OPTICAL SENSOR
Monolithic Silicon IC Containing Photodiode, Operational Amplifier, and Feedback Components Converts Light Intensity to a Voltage High Irradiance Responsivity, Typically 37 mv/(w/cm 2 ) at p = 635 nm ()
More information