5790B/5/AF AC Measurement Standard
|
|
- Poppy Young
- 5 years ago
- Views:
Transcription
1 /5/AF AC Measurement Standard General Description The /5/AF specifications in Table 1 supersede those published in the Operator and Service Manuals. The specification differences (between the and the /5/AF) are bolded. The following notes apply to the specifications in Table 1: Uncertainties apply for 1 year, at 23 C ± 5 C, up to 50 % RH. Performance is achieved using the "Medium Filter Setting". Specifications are valid at the /5/AF input connectors, and may be degraded by input cables. Additional footnotes may apply. Refer to the specifications for more information. PN October Fluke Corporation. All rights reserved. 1
2 /5/AF Table 1. /5/AF AC Voltage Specifications Voltage 2.2 mv 7 mv 22 mv 70 mv 220 mv 700 mv AC/DC Transfer Mode (± PPM) Specifications (1 year) 10 Hz 20 Hz Hz 40 Hz Hz 20 khz khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz Hz 40 Hz Hz 20 khz khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz Hz 40 Hz Hz 20 khz khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz [1] Hz 40 Hz Hz 20 khz khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz [1] Hz 40 Hz Hz 20 khz khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz [1] Hz 40 Hz Hz 20 khz khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Measurement Mode ± (PPM of Reading + μv) 2
3 Voltage Table 1. /5/AF AC Voltage Specifications (continued) Specifications (1 year) AC/DC Transfer Mode (± PPM) AC Measurement Standard General Description Measurement Mode ± (PPM of Reading + μv) 10 Hz 20 Hz [2] Hz 40 Hz Hz 20 khz V 20 khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz [2] Hz 40 Hz Hz 20 khz V 20 khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz [2] Hz 40 Hz Hz 20 khz V 20 khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz [2] Hz 40 Hz Hz 20 khz V [3] 20 khz 50 khz khz 100 khz khz 300 khz khz 500 khz khz 1 MHz Hz 20 Hz Hz 40 Hz Hz 20 khz V [3] 20 khz 50 khz khz 100 khz khz 300 khz khz 500 khz Hz 20 Hz [4] Hz 40 Hz V 40 Hz 20 khz khz 50 khz khz 100 khz Hz 20 Hz [4] Hz 40 Hz V 40 Hz 20 khz khz 50 khz [5] khz 100 khz [5] 500 [1] For 9.5 Hz to 10 Hz, the specifications is ±(1000 ppm of reading μv) [2] For 9.5 Hz to 10 Hz, the specifications is ±(1000 ppm of reading) [3] Inputs >100 khz and with a V*Hz product >2.2E7 are typical. [4] Typical specification, as determined by sourcing with the Fluke 5205A Precision Power Amplifier. [5] Inputs >30 khz and >750 V are typical, as determined by sourcing with the Fluke 5205A Precision Power Amplifier. Note: The Product is to be used in controlled environments. For disturbances on the mains power supply of >0.5 Vrms from 10 MHz to 40 MHz, add 5 ppm to the 2.2 V range. 3
4 /5/AF Calibration Requirements Full Calibration as described in Chapter 3 of the Service Manual must be performed before the expiration of the specified calibration interval to guarantee /5/AF specifications listed in this addendum. Replace Table 3-14 in the Service Manual with the following Table 3. Table 3 reflects the Performance Specification differences shown in Table 1. The specification differences (between the and the /5/AF) are bolded. Table 3. Main Input Verification Record 2 Yr Error Error Hz 2350 No spec Hz 1390 No spec Hz 1070 No spec khz 1070 No spec khz 1070 No spec khz 1810 No spec khz 2450 No spec khz 4300 No spec khz 6400 No spec MHz 7500 No spec khz 2587 No spec Hz 1070 No spec Hz 587 No spec Hz 427 No spec khz 427 No spec khz 427 No spec khz 733 No spec khz 1020 No spec khz 1870 No spec khz 2600 No spec MHz 3600 No spec Hz 355 No spec Hz 245 No spec Hz 175 No spec khz 175 No spec khz 175 No spec 4
5 AC Measurement Standard Calibration Requirements 2 Yr Error Error khz 310 No spec khz 435 No spec khz 1010 No spec khz 1290 No spec MHz 2100 No spec Hz 265 No spec Hz 145 No spec Hz 90 No spec khz 90 No spec khz 90 No spec khz 163 No spec khz 302 No spec khz 577 No spec khz 803 No spec MHz 1230 No spec khz MHz 600 No spec Hz Hz Hz khz khz khz khz 173 No spec khz 270 No spec khz 420 No spec MHz 600 No spec Hz Hz Hz khz khz
6 /5/AF 2 Yr Error Error khz khz 83 No spec khz 187 No spec khz 313 No spec MHz 600 No spec Hz Hz Hz khz khz khz khz 71 No spec khz 160 No spec khz 260 No spec MHz 600 No spec Hz Hz Hz khz khz khz khz 71 No spec khz 160 No spec khz 260 No spec MHz 600 No spec Hz Hz Hz khz khz khz khz 71 No spec 6
7 AC Measurement Standard Calibration Requirements 2 Yr Error Error khz 160 No spec khz 260 No spec MHz 600 No spec Hz Hz Hz khz khz khz khz 81 No spec khz 190 No spec khz 400 No spec MHz 600 No spec Hz Hz Hz khz khz khz khz 81 No spec khz 190 No spec khz 400 No spec MHz 600 No spec khz 410 No spec MHz 600 No spec Hz Hz Hz khz khz khz khz 94 No spec khz 200 No spec khz 210 No spec 7
8 /5/AF 2 Yr Error Error Hz Hz Hz khz khz khz khz 98 No spec Hz khz khz khz 130 No spec khz 500 No spec Hz khz khz khz 130 No spec Hz khz 130 No spec khz 500 No spec 8
5790A/AF AC Measurement Standard
AC Measurement Standard General Description The 5790A/AF is similar to the standard 5790A AC Measurement Standard except for different performance specifications and added accessories as noted below. The
More information5790A Automated AC Measurement Standard
5790A Automated AC Measurement Standard Technical Data Accuracy that s easy to use The 5790A is a complete automated ac measurement standard designed for the most demanding calibration applications. It
More informationTechnical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date
Last Amended on 29.02.2016 Page 1 of 6 SOURCE 1. DC VOLTAGE $ 100mV to 220 mv 220 mv to 220 V 220 V to 1000 V 2. AC VOLTAGE $ 50 Hz to 1 khz 3 mv to 220 mv 220 mv to 220 V 220 V to 1000 V 3. DC CURRENT
More information6100A/6101A - Alternative verification methods
6100A/6101A - Alternative verification methods Alternative verification of 6100A/6101A 6100A/6101A - Alternative verification methods Title Page Alternative verification of 6100A/6101A... 2 Recommendation...
More informationManual Supplement Fluke Corporation. All rights reserved. Printed in U.S.A. x
Manual Title: 5520A Service Supplement Issue: 5 Part Number: 802303 Issue Date: 3/05 Print Date: April 1999 Page Count: 7 Revision/Date: 1, 12/02 This supplement contains information necessary to ensure
More informationsupplies and frequency converters. BumbleBee is also very effective in fast transient measurements
High Voltage Differential Probe Order-No: 880-102-501 Features: 1000 V CAT III 400 MHz Bandwidth < 1 % Deviation within Specified Operating Temperatures (0 C to +50 C) High CMRR 4 Mode Attenuation Useable
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Lockheed Martin Stennis IMC Bldg 5100 Stennis
More informationOscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators Extended Specifications
Oscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators Extended Specifications These specifications apply to the 5520A-SC1100, 5500A-SC600 and 5500A-SC300 Oscilloscope Calibration
More informationAnnex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15195-01-02 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.10.2017 to 29.07.2019 Holder of certificate: Rohde
More informationINAB Policy Statement on Scope Format for Calibration Laboratories PS27 1. INTRODUCTION
INAB Policy Statement on Scope Format for Calibration Laboratories PS27 1. INTRODUCTION 1.1. The definitive statement of the accreditation status of a calibration laboratory is the accreditation certificate
More informationTesting & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra
Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationOscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators
Oscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators Extended Specifications November 1999 General Specifications These specifications apply to the 5520A-SC1100, 5500A-SC600
More informationDigital Multimeters R6451A/6452A. R6451A/6452A Digital Multimeters. 5 1/2 Digit DMM Series Enabling Dual Input and Display
5 1/2 Digit DMM Series Enabling Dual Input and Display R6451A/6452A R6451A: General-Purpose Low-Price DMM with Standard Functions R6452A: Full-Functional DMM with Dual- Channel Input and Dual Display (Photo
More informationPXIe Contents. Required Software CALIBRATION PROCEDURE
CALIBRATION PROCEDURE PXIe-5160 This document contains the verification and adjustment procedures for the PXIe-5160. Refer to ni.com/calibration for more information about calibration solutions. Contents
More informationAWG-GS bit 2.5GS/s Arbitrary Waveform Generator
KEY FEATURES 2.5 GS/s Real Time Sample Rate 14-bit resolution 2 Channels Long Memory: 64 MS/Channel Direct DAC Out - DC Coupled: 1.6 Vpp Differential / 0.8 Vpp > 1GHz Bandwidth RF Amp Out AC coupled -10
More informationCalibration Techniques for the Home Lab
Calibration Techniques for the Home Lab Jacques Audet VE2AZX jacaudet@videotron.ca Web: ve2azx.net September 2018 ve2azx.net 1 Summary - Using a reference multimeter as a calibrator for less accurate instruments.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRO LAB SERVICES, INC. 517 N. Fulton Avenue Evansville, IN 47710 Robert J. Dreier Phone: 812 423 5211 CALIBRATION Valid To: April 30, 2019 Certificate Number:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 6 Contact: Mr J Puttock Spectrum Business Estate Tel: +44 (0)1622 690187 Bircholt Road Fax: +44 (0)1622 678827 Parkwood E-Mail: jonputtock@aol.com
More informationOscilloscope Calibration Options for 55XX Series Multi-Product Calibrators
Oscilloscope Calibration Options for 55XX Series Multi-Product Calibrators Extended Specifications These specifications apply to the 5520A-SC1100, 5500A- SC600 and 5500A-SC300 Oscilloscope Calibration
More informationTECHNICAL MANUAL CALIBRATION PROCEDURE FOR DIGITAL MULTIMETER 34401A (HEWLETT-PACKARD)
TECHNICAL MANUAL CALIBRATION PROCEDURE FOR DIGITAL MULTIMETER 34401A (HEWLETT-PACKARD) This publication replaces T.O. 33K8-4-1029-1 dated 30 May 2000. Distribution Statement - Distribution authorized to
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK DC RESISTANCE 2 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ Contact: Mr A Robson Tel: +44 (0)1642-718900 Fax: +44 (0)1642-718909 E-Mail:
More information8588A Reference Multimeter
8588A Reference Multimeter Product Specifications March 2019 Rev. A 2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of
More informationCERTIFICATE of CALIBRATION
Primary Laboratory within AC Electricity Danish Standards Laboratory AC and RF Quantities DPLE Partner (Danish Primary Laboratory for Electricity) Page no. Appendix 1/5 1 CERTIFICATE of CALIBRATION for
More informationAmerican Association for Laboratory Accreditation
Page 1 of 6 5700A/5720A/3458A Purpose of Study This Measurement Advisory Committee (MAC) working group was formed to focus on the performance enhancement offered by artifact calibration for the Fluke 5700A,
More informationManual Supplement. Manual Title: 5520A Operators Supplement Issue: 2 Print Date: August 1998 Issue Date: 3/04 Revision/Date: 6, 1/03 Page Count: 3
Manual Title: 5520A Operators Supplement Issue: 2 Print Date: August 1998 Issue Date: 3/04 Revision/Date: 6, 1/03 Page Count: 3 This supplement contains information necessary to ensure the accuracy of
More informationAn Evaluation of Artifact Calibration in the 5700A Multifunction Calibrator
An Evaluation of Artifact Calibration in the 57A Multifunction Calibrator Application Note Artifact Calibration, as implemented in the Fluke Calibration 57A Multifunction Calibrator, was a revolutionary
More informationIsolated High Level Voltage Output 7B22 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated High Level Voltage Output 7B22 FEATURES Unity gain single-channel signal conditioning output module. Interfaces and filters a +10 V input signal and provides an isolated precision output of +10V.
More informationContents CALIBRATION PROCEDURE NI PXI-5422
CALIBRATION PROCEDURE NI PXI-5422 This document contains instructions for calibrating the NI PXI-5422 arbitrary waveform generator. This calibration procedure is intended for metrology labs. It describes
More informationDG5000 Series Specifications
DG5000 Series Specifications All the specifications can be guaranteed if the following two conditions are met unless where noted. The generator is within the calibration period and has performed self-calibration.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZETEC, INCORPORATED 875, boul. Charest ouest, Suite 100 Quebec, QC, G1N 2C9 CANADA
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZETEC, INCORPORATED 875, boul. Charest ouest, Suite 100 Quebec, QC, G1N 2C9 CANADA Ghislain Cournoyer, Systems Manufacturer & Services Manager Phone: 418 263
More informationINPUT RESISTANCE OR CLAMP VOLTAGE. 2 Years 23 C ±5 Voltage mv 3 10 nv > 10 G
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 www.keithley.com Model 2010 Low-Noise Multimeter Specifications DC CHARACTERISTICS CONDITIONS: MED (1 PLC) 1 or SLOW (5 PLC)
More information9 Specifications. Specifications NOMINAL CHARACTERISTICS
9 Specifications Specifications NOMINAL CHARACTERISTICS WARRANTED CHARACTERISTICS Nominal characteristics describe parameters and attributes that are guaranteed by design, but do not have associated tolerances.
More informationChapter 6 Specifications
RIGOL This chapter lists the technical specifications and general specifications of the RF signal generator. The technical specifications are valid when the instrument is within the calibration period,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Instrument Company, Inc. 332 North Fries
More informationDC MHZ PXI Differential Instrumentation Amplifier
DC - 100 MHZ PXI Differential Instrumentation Amplifier Differential 100 V Common Mode Input DC - 100 MHz Bandwidth AC/DC Coupling Programmable Attenuation/Gain/ Offset 9 nv/ Input Noise 50 Ω Output Impedance
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 13725 SW Karl Braun Drive Beaverton, OR 97077 Andrew Mumford Phone: 503 627 2476 CALIBRATION Valid to: August 31, 2018
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationElectronics Test and Development Centre, STQC Directorate, Agriculture College Campus, Shivajinagar, Pune, Maharashtra
Last Amended on 23.02.2015 Page 1 of 8 SOURCE 1. DC VOLTAGE # 100 V to 1 mv 0.5 % to 0.06 % Using Multi-Function Calibrator 1 mv to 10 mv 0.06 % to 0.007 % by 10 mv to 100 mv 0.007 % to 0.0014 % 100 mv
More informationAC/DC Current Oscilloscope Probe Model SL261
AC/DC Current Oscilloscope Probe Model SL261 USER MANUAL I ZERO 100 mv/a 10 mv/a OFF Statement of Compliance Chauvin Arnoux, Inc. d.b.a. AEMC Instruments certifies that this instrument has been calibrated
More informationIsolated, Linearized Thermocouple Input 7B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized Thermocouple Input 7B47 FEATURES Interfaces, amplifies and filters input voltages from a J, K, T, E, R, S, B or N-type thermocouple. Module provides a precision output of either +1
More informationIsolated, Thermocouple Input 7B37 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Thermocouple Input 7B37 FEATURES Interfaces, amplifies, and filters input voltages from a J, K, T, E, R, S, or B-type thermocouple. Module provides a precision output of either +1 V to +5 V or
More informationACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company
ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Oscilloscope Services 7827 Kingsley Houston, TX. 77087 Bill Whitworth Phone:
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationTRACEABLE MEASUREMENT CAPABILITY
PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200
More informationJune 18, 2015 VIA . Mai Ngo International Process Solutions (IPS) 1300 Industrial Rd., Suite 22 San Carlos, CA 94070
June 18, 2015 VIA EMAIL Mai Ngo International Process Solutions (IPS) 1300 Industrial Rd., Suite 22 San Carlos, CA 94070 Re: Extension for ISO/IEC 17025: 2005 accreditation Dear Mai Ngo: This letter is
More information5790B. Operators Manual. AC Measurement Standard
5790B AC Measurement Standard Operators Manual June 2015 2015 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective
More informationIsolated, Linearized RTD Input 7B34 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized RTD Input 7B34 FEATURES Amplifies, Protects, Filters, and interfaces input voltages from a wide variety of two and three-wire platinum, copper and nickel Resistor Temperature Detectors
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Advanced Technical Services NW, Inc. 8612
More informationSERIE E N. The E N series clamps use Hall-effect technology for the measurement of AC and DC currents from several milliamps to over 100 A.
Pinces Current ampèremetriques clamps for AC/DC pour current courant AC SERIE E N The E N series clamps use Hall-effect technology for the measurement of AC and DC currents from several milliamps to over
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540.3-2006 ELECTRO RENT CORPORATION 15385 Oxnard Street Van Nuys, CA 91411 Karl Haynes Phone: 770 310 5228 CALIBRATION Valid To: June 30, 2019
More informationDRTS-6. DRTS-6 has been designed to test: DRTS-6. Advanced Protection Relay Test Set and Measurement System
DRTS-6 Advanced Protection Relay Test Set and Measurement System MULTI-TASKING EQUIPMENT DESIGNED FOR TESTING PROTECTION RELAYS, ENERGY METERS, TRANSDUCERS POWERFUL AND LIGHTWEIGHT HIGH ACCURACY: BETTER
More informationDiscipline Electro-Technical Calibration Issue Date Certificate Number C-0556 Valid Until Last Amended on - Page 1 of 7
SAC (ISRO)-TIMCD-Calibration, Space Applications Centre, Last Amended on - Page 1 of 7 SOURCE 1. DC VOLTAGE $ 10 V 4.0 µv Using DC Reference Standard Fluke /734A(732B) 100 mv to 1V 0.66 µv to 4 µv Using
More information2-3 Calibration of Standard Voltage and Current Generator
2-3 Calibration of Standard Voltage and Current Generator Katsumi FUJII, Kojiro SAKAI, Tsutomu SUGIYAMA, Kouichi SEBATA, and Iwao NISHIYAMA This paper describes the calibration method of standard voltage
More informationMultimeter Selection Guide Fluke 8508A & Agilent 3458/HFL
Multimeter Selection Guide Fluke 8508A & Agilent 3458/HFL TECHNICAL INFORMATION When comparing two products features and specification using sales information it is often difficult to determine which product
More informationModular Smart Interfaces
Modular Smart Interfaces Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement Modular Smart Interfaces MSI Series Modular Smart Interfaces (MSI) bring an expanded
More informationARCO 400. Technical Data
Technical Data OMICRON electronics GmbH 2017. All rights reserved. This technical data was extracted from the following manual: ENU 1119 04 03 All rights including translation reserved. Reproduction of
More informationModel Multimeter Specifications ABSOLUTE ACCURACY TYPICAL ACCURACIES 2002 SPECIFIED CALIBRATION INTERVALS
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 www.tek.com/keithley Model 2002 Multimeter Specifications This document contains the complete specifications for the 2002. Every
More informationHP 34401A Specifications 8
8 HP 34401A Specifications 8 DC Characteristics DC Characteristics Accuracy Specifications ± ( % of reading + % of range ) [ 1 ] Function Range [ 3 ] Test Current or Burden Voltage 24 Hour [ 2 ] 23 C ±
More informationACCREDITED LABORATORY
THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY A2LA has accredited FLUKE ELECTRONICS Carrollton, TX for technical competence in the field of Calibration The accreditation covers
More informationPA900 PERFORMANCE SPECIFICATIONS
PA900 PERFORMANCE SPECIFICATIONS DIMENSIONAL, ENVIRONMENTAL AND POER SUPPLY SPECIFICATIONS DIMENSIONAL Nominal Dimensions Nominal eight 137mmH x 248mm x 284mmD (5.4 x 9.75 x 11.2 ) with feet not extended
More informationCalibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 10
Calibration Laboratory Assessment Service CLAS Certificate Number 95-02 Page 1 of 10 400 Britannia Road East, Unit #1 Mississauga, Ontario L4Z 1X9 Contact: Mr. Vince Casali Tel (905) 890-7600, (800) 36FLUKE
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NQA & Conformity Assessment Laboratory 23B
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 NATIONAL TECHNICAL SYSTEMS (NTS) 7800 Highway 20 West Huntsville, AL 35806 Rick Davis Phone: 256 716 4483 CALIBRATION Valid To: December
More informationManual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Title: 5502E Getting Started Supplement Issue: 3 Part Number: 4155211 Issue Date: 9/18 Print Date: November 2012 Page Count: 12 Revision/Date: This supplement contains information necessary to ensure
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
DC RESISTANCE Unit 4 Riverside Business Centre Walnut Tree Close Guildford Surrey GU1 4UG Contact: Ian Norman Tel: +44 (0)1483 302700 Fax: +44 (0)1483 300562 E-Mail: inorman@caltest.co.uk Website: www.caltest.co.uk
More informationBumbleBee. High Voltage Differential Probe Ord.-No: Features:
High Voltage Differential Probe Ord.-No: 880-102-501 Features: 2000 V rms Measurement Category I, 6000 V transient Overvoltage 1000 V CAT III 400 MHz Bandwidth < 1 % Deviation within Specified Operating
More informationCAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222
This is to signify that CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222 Calibration Laboratory CL-108 has demonstrated compliance with the ANS/ISO/IEC Standard 17025:2005, General requirements
More informationA New Method for the Calibration of the mv Ranges of an AC Measurement Standard
A New Method for the Calibration of the mv Ranges of an AC Measurement Standard Speaker/Author Neil Faulkner Fluke Corporation PO Box 9090, Everett, WA 98206 Phone: (425) 446-5538 FAX: (425) 446-5649 E-mail:
More informationFluke Three-Phase Power Quality Recorder Topas. Class-A compliance for the most demanding power quality tests
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Fluke 1760 Three-Phase Power Quality Recorder Topas Technical Data Class-A compliance for the most demanding
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. 3947 Lincoln Ave., Ste. B Groves, TX 77619 Jerry Kraus Phone: 432 580 7040 CALIBRATION Valid To: February 29,
More information5500A. Multi-Product Calibrator. Extended Specifications 2005
5500A Multi-Product Calibrator Extended Specifications 2005 5500A Specifications The following paragraphs detail specifications for the 5500A Calibrator. The specifications are valid after allowing a warm-up
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More information10.00 (1/2) PAC series
Clamp-on AC/DC current probes PAC Series The is a range of professional AC/DC clamp-on current probes designed to meet the very latest in safety and performance standards. There are two different jaw designs
More informationSpecifications. PCI Bus. Analog Input Input Characteristics
Specifications A This appendix lists the specifications of the NI 6034E/6035E/6036E. These specifications are typical at 25 C unless otherwise noted. The first section provides the specifications for the
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that TesCom 2600 Longhorn Blvd., Ste. 112 Austin,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENVIROCAL INC. 256 E. Washington Street Sabina, OH 45169 Brian K. Riddick Phone: 937 584 4848 CALIBRATION Valid To: June 30, 2019 Certificate
More information3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) DIGITAL HiTESTER Field measuring instruments.
2004 3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) DIGITAL HiTESTER Field measuring instruments Outstanding performance for production lines with a sampling rate of 3.3
More informationFluke 5820A Oscilloscope Calibrator Specifications
Fluke 5820A Oscilloscope Calibrator Specifications Voltage Function Volt Function DC Signal Square Wave Signal 1 Load into 50Ω into 1 MΩ into 50Ω into 1 MΩ Amplitude Range 0V to ±6.6V 0V to ±130V ±1 mv
More informationUHF Wireless Microphone System
PDWM1902 PDWM1904 PDWM3375 PDWM3378 PDWM3400 UHF Wireless Microphone System SYSTEM TYPE The Vocal Artist-UHF is a hand-held system designed for singers who desire the high quality microphones and the freedom
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEFEN ELECTRONIC SERVICES LTD 30 Hasivim Street Petah-Tikva 4951169 Israel Arcady Gefen Phone: 97239266044 CALIBRATION Valid To: June 30, 2019 Certificate Number:
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that NQA & Conformity Assessment Laboratory 23B
More informationAgilent 970-Series Handheld Multimeters Data Sheet
Agilent 970-Series Handheld Multimeters Data Sheet Benchtop features and performance with handheld convenience and price 3 1 /2and 4 1 /2 digits with dcv accuracy to 0.05% 1 khz to 100 khz frequency response
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZETEC, INCORPORATED 8226 Bracken Place SE, Suite 100 Snoqualmie, WA 98065 Scott Taylor, After Market Service Manager Phone: 425 974 2766 CALIBRATION Valid To:
More informationCurrent clamps for AC current
Current clamps for AC current Y series The Y series clamps are designed to be both rugged and versatile whilst remaining easy to use. The jaws are designed so that the clamps can be hooked onto cables
More informationPXIe Contents. Required Software CALIBRATION PROCEDURE
CALIBRATION PROCEDURE PXIe-5113 This document contains the verification and adjustment procedures for the PXIe-5113. Refer to ni.com/calibration for more information about calibration solutions. Contents
More informationHarmonic Current emission EN :2014 Class A Pass. Voltage Fluctuation and Flicker EN :2013 Clause 5 Pass
Reference No.: WTS15F0323845E Page 2 of 33 1 Test Summary Test Item Mains Terminal Disturbance Voltage, 148.5kHz to 30MHz Disturbance Power, 30MHz to 300MHz Discontinuous Disturbance (Click) Radiated Emission,
More informationHP 8901B Modulation Analyzer. HP 11722A Sensor Module. 150 khz MHz. 100 khz MHz. Technical Specifications. Four Instruments In One
HP 8901B Modulation Analyzer 150 khz - 1300 MHz HP 11722A Sensor Module 100 khz - 2600 MHz Technical Specifications Four Instruments In One RF Power: ±0.02 db instrumentation accuracy RF Frequency: 10
More information8558A 8 1/2 Digit Multimeter
8558A 8 1/2 Digit Multimeter Product Specifications March 2019 Rev. A 2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 605-S ULTRASTAB I PN = 600 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
More informationXT2640 Precision Multi-Channel Power Analyzer
XT2640 Precision Multi-Channel Power Analyzer History Displays Vector Diagrams XT2640 Precision Multi-Channel Power Analyzer The XT2640 is actually three power analyzers in a single chassis with a single
More informationDiscontinuous Disturbance (Click) EN :2006+A1:2009+A2:2011 Clause N/A** Radiated Emission, 30MHz to 1000MHz
Reference No.: WTN13F0706038E Page 2 of 40 1 Test Summary Test Item Mains Terminal Disturbance Voltage, 148.5kHz to 30MHz Disturbance Power, 30MHz to 300MHz EMISSION Test Standard Class / Severity Result
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertification Cover Sheet Accredited Calibration Order Number:
. Agilent Technologies UK Ltd 610 Wharfedale Road, Winnersh Triangle, Wokingham, BERKSHIRE RG41 5TP AGILENT TECHNOLOGIES INTERNAL ASSESSMENT PROGRAM : AQ-SSU-12/95 Tel +44(0)118 9276201 Fax: 0118 9276855
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44
More informationModel 34A. 3Hz to 2MHz 2-Channel Butterworth/Bessel HP, LP, BP, BR Plug-In Filter Card for Model 3905/3916 Chassis.
Model 34A 3Hz to 2MHz 2-Channel Butterworth/Bessel HP, LP, BP, BR Plug-In Filter Card for Model 3905/3916 Chassis Operating Manual Service and Warranty Krohn-Hite Instruments are designed and manufactured
More informationOn-site multifunction calibrator
CALYS 50 On-site multifunction calibrator Simultaneous and Generation Protected for on-site use Easy connection system Designed with a close collaboration with industrials, Calys 50 integrates all the
More information