Electronics Test and Development Centre, STQC Directorate, Agriculture College Campus, Shivajinagar, Pune, Maharashtra

Size: px
Start display at page:

Download "Electronics Test and Development Centre, STQC Directorate, Agriculture College Campus, Shivajinagar, Pune, Maharashtra"

Transcription

1 Last Amended on Page 1 of 8 SOURCE 1. DC VOLTAGE # 100 V to 1 mv 0.5 % to 0.06 % Using Multi-Function Calibrator 1 mv to 10 mv 0.06 % to % by 10 mv to 100 mv % to % 100 mv to 1000 V % to % 2. AC VOLTAGE # 10 Hz to 10 mv to 100 mv 100 mv to 10 V % to 0.04 % 0.04 % to 0.02 % Using Multi-Function Calibrator by 10 V to 100 V 0.02 % to 10 khz 10 mv to 100 mv % to 0.02 % 100 mv to 10 V 0.02 % to % 10 V to 100 V % 100 V to 1000 V % to 0.02 % Using Multi-Function Calibrator by 10 khz to 100 khz 10 mv to 100 mv 0.12 % to 0.05 % Using Multi-Function Calibrator 100 mv to 10 V 0.05 % to % by 10 V to 100 V % to % 3. DC CURRENT # 10 A to 100 A 0.04 % to 0.02 % Using Multi-Function Calibrator 100 A to 1 ma 0.02 % to % by 1 ma to 100 ma % to % 100 ma to 1 A % to % 1 A to 10 A % to 0.03 % 10 A to 20 A 0.03 % to 0.25 %

2 Last Amended on Page 2 of 8 4. AC CURRENT # 10 Hz to 1 khz 100 A to 1 ma % to 0.03 % Using Multi-Function Calibrator, 1 ma to 100 ma 0.03 % to % Trans-Conductance & 100 ma to 1A % to % Multiproduct Calibrator by Direct 1 A to 10 A % to 0.08 % method 10 A to 20 A 0.08 % to 0.15 % 1 khz to 5 khz 100 A to 1 ma % Using Multi-Function Calibrator, 1 ma to 100 ma % to % Trans-Conductance & 100 ma to 1 A % to % Multiproduct Calibrator by Direct 1 A to 10 A % to 0.11 % method / 60 Hz 20 A to 50 A 0.13 % Using Power/Energy Calibrator by 5. DC RESISTANCE # 1 m to 100 m 0.02 % Using Standard Resistors by Direct 100 m to % Method 1 to 100 k % to % Using Multi-Function Calibrator 100 k to 100 M % to % by 100 M to 1 G % to % 1 G to 100 G % to 0.7 % HV Resistance box by Direct Method 6. AC RESISTANCE # 1 khz 1 m to 100 k 0.04 % to 0.03 % Using Standard Resistors by Direct Method

3 Last Amended on Page 3 of 8 7. CAPACITANCE # 1 khz 100 pf to 1 F 0.1 % to 0.35 % Using Standard Capacitors Terminal Capacitance Standard by 8. INDUCTANCE # 1 khz 100 H to10 H % Using Standard Inductors by Direct Method 9. FREQUENCY/PERIOD # 0.2 Hz to 2.2 GHz 1x10-8 Hz Using & Signal generator R & S 1 ns to 5 s 1x10-7 s by 10. DC POWER # 1 W to kw 10 V to 1000 V 0.1 A to 20 A % to 0.2 % Using Multi-Function Calibrator, by 11. AC POWER # 1Ø 60 V to 240 V 0.2 A to 20 A UPF to 0.5 PF 0.5 PF to 0.2 PF 0.05 % to 0.13 % 0.13 % to 0.28 % Using Power Energy Calibrator by 12. AC POWER # 3Ø 60 V to 240 V 0.2 A to 20 A UPF to 0.5 PF 0.5 PF to 0.2 PF 0.05 % to 0.13 % 0.13 % to 0.45 % Using Power Energy Calibrator by

4 Last Amended on Page 4 of POWER FACTOR # (Lead/Lag) 0.2 to1 0.04º Using Power Energy Calibrator by 14. ENERGY # 1Ø 50/60 Hz 60 V to 240 V 0.2 A to 20 A UPF to 0.2 PF 0.04 % to 0.28 % Using Power Energy Calibrator by 15. ENERGY # 3Ø 50/60 Hz 60 V to 240 V 0.2 A to 20 A UPF to 0.2 PF 0.04 % to 0.28 % Using Power Energy Calibrator by 16. TEMPERATURE SIMULATION # RTD (-) 200 C to 850 C 0.06 C Using Multi-Function Calibrator by simulation method T/C (-) 200 C to 1800 C 0.2 C

5 Last Amended on Page 5 of OSCILLOSCOPE PARAMETER # AC/DC, (50 /1M ) Amplitude 1 mv to 100 V 0.13 % Using Multi-Function Calibrator by Time Marker 2 ns to 5 s 0.03 % Band Width Frequency 1 GHz 3.4 % MEASURE 1. DC VOLTAGE # 100 V to 1 mv 0.13 % to % Using Reference Multi-meter by 1 mv to 100 mv % to % 100 mv to 1000 V % to % 1 kv to 25 kv 2.0 % Using Probe & DMM by Direct/Comparison Method 2. AC VOLTAGE # 10 Hz to 100 Hz 10 mv to 100 mv % to 0.02 % Using Reference Multi-meter by 100 mv to 100 V 0.02 % to 0.04 % 100 V to 1000 V 0.04 % to 0.02 % 100 Hz to 10 khz 10 mv to 100 V 0.06 % to 0.04 % Using Reference Multi-meter by 100 V to 1000 V 0.04 % to 0.02 %

6 Last Amended on Page 6 of 8 10 khz to 100 khz 10 mv to 100 mv 0.09 % to 0.13 % Using Reference Multi-meter by 100 mv to 100 V 0.13 % to 0.06 % 100 khz to 1 MHz 100 mv to 10 V 0.37 % Using Reference Multi-meter by 1 kv to 25 kv 3.1 % Using probe & DMM by Direct/Comparison Method 3. DC CURRENT # 10 A to 100 A % to % Using Reference Multi-meter by 100 A to 1 ma % to % 1 ma to 1 A % to % 1 A to 10 A % to % 10 A to 20 A % 4. AC CURRENT # 10 Hz to 10 khz 10 A to 100 ma 0.29 % to 0.07 % 10 Hz to 10 khz 100 ma to 1 A 0.07 % to 0.1 % 1 A to 20 A 0.1 % to 0.15 % Using Reference Multi-meter & Current shunt by to 60 Hz 10 A to 50 A 0.12 % Using Current Shunt and DMM V/R method

7 Last Amended on Page 7 of 8 5. DC RESISTANCE # 1 m to 100 m % Using DMM 100 m to % to % Electrometer, 1 to 10 M % to % V/I method by 10 M to 100 M % to % 100 M to 1 G % to 0.05 % 1 G to 100 G 0.05 % to 0.42 % 6. AC RESISTANCE # 1 khz 100 m to 100 k 0.03 % to % Using Precision Digi-Bridge by 7. CAPACITANCE # 1 khz 10 pf to 1 μf 1 μf to 100 μf 0.04 % 0.04 % to 0.32 % Using Precision Digi-Bridge by 8. INDUCTANCE # 1 khz 100 H to 10 H 0.1 % Using Precision Digi-Bridge by 9. FREQUENCY/PERIOD # 0.2 Hz to 2 Ghz 2 ns to 5 s 1.5 x 10-7 Hz to 1 x 10-9 Hz 1 x 10-9 s Using Timer Counter Analyzer Pendulum by TIME INTERVAL # 5 s to 2.5 Hrs s to s Using Time Interval Meter by Comparison Method 10. RF VOLTAGE # khz to 2 GHz 20 mv to 1.5 V (pk to pk) 0.2 db to 0.5 db Using RF Power Meter with Sensor by

8 Last Amended on Page 8 of 8 11 TEMPERATURE SIMMULATION # RTD T/C (-) 200 C to 850 C 850 C to 1800 C 0.06 C 0.06 C to 0.15 C Using DMM by simulation method * Measurement Capability is expressed as an uncertainty ( ) at a confidence probability of 95% # The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used.

Calsytech, # 38 North Mada Street Nandambakkam, Chennai, Tamil Nadu. Discipline Electro-Technical Calibration Issue Date

Calsytech, # 38 North Mada Street Nandambakkam, Chennai, Tamil Nadu. Discipline Electro-Technical Calibration Issue Date Last Amended on 23.11.2016 Page 1 of 7 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 10 mv to100 mv 100 mv to1000 V 0.43% to 0.05% 0.05% to 0.01% 0.01% to 0.004% Calibrator, Calibrator by DC VOLTAGE 1mV to 20 mv

More information

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to

More information

Calitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra

Calitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra Calitron Calibration, U1: 207, Kohinoor Arcade, Tilak Chowk, Last Amended on - Page 1 of 7 SOURCE 1. DC Voltage # 1 mv to 200 mv 200 mv to 1000 V 2. DC Current # 100 µa to 200 ma 200 ma to 20 A 20A to

More information

MPS Electrical Test Laboratory, Larsen & Toubro Limited, Mysore Campus, KIADB Industrial Area, Hebbal Hootagalli, Mysore, Karnataka

MPS Electrical Test Laboratory, Larsen & Toubro Limited, Mysore Campus, KIADB Industrial Area, Hebbal Hootagalli, Mysore, Karnataka Last Amended on - Page 1 of 6 SOURCE 1. DC VOLTAGE $ 1mV to 10 mv 0.13 % to 0.014% Using Multifunction Calibrator 10 mv to 1 V 0.014% to 0.0016% By Direct Method 1 v to 10 V 0.0016% to 0.0017% 10 V to

More information

Technical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date

Technical Services Department, BHEL, Piplani, Bhopal, Madhya Pradesh. Discipline Electro Technical Calibration Issue Date Last Amended on 29.02.2016 Page 1 of 6 SOURCE 1. DC VOLTAGE $ 100mV to 220 mv 220 mv to 220 V 220 V to 1000 V 2. AC VOLTAGE $ 50 Hz to 1 khz 3 mv to 220 mv 220 mv to 220 V 220 V to 1000 V 3. DC CURRENT

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Tra-Cal, LLC 7901 Beechcraft Avenue, Suite

More information

Price List. Calibration Fee

Price List. Calibration Fee National Institute of Metrology (Thailand) Calibration Fee Electrical Metrology 1 DC Voltage Standard 1.018 V 0.9 V/V 12,500/piece 09010-10110 10 V 0.4 V/V + 6,750/next point Standard Cell 1 V / 1.018

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bankhead Industrial Estate Contact: Miss Alexis Ross Bankhead Avenue Tel: +44 (0)1224 710033 Bucksburn Fax: +44 (0)1224 710099 Aberdeen E-Mail:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 BHD Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 4613 Northwest

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Caliber Test & ment 2100 W. 6th Ave. Broomfield, CO 80020 Everett Hedrick Phone: 303 469 5335 CALIBRATION Valid to: May 31, 2019 Certificate

More information

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 10

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 10 Calibration Laboratory Assessment Service CLAS Certificate Number 95-02 Page 1 of 10 400 Britannia Road East, Unit #1 Mississauga, Ontario L4Z 1X9 Contact: Mr. Vince Casali Tel (905) 890-7600, (800) 36FLUKE

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Palen Kimball, LLC 1717 University Ave. West

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Korea 775 Gyeongin-ro

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TRADEPORT ELECTRONICS CALIBRATION LABORATORY 1750 Steeles Ave. West, Suite 5 Concord, Ontario L4K 2L7 CANADA Barry Conway Phone: 905 660 3797 CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CENTURY LABS II dba CENTURY CALIBRATIONS 1929 Lakeview Drive Fort Wayne, Indiana 46808 Robin Bork Phone: 260 471 1673 CALIBRATION Valid

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Technical Maintenance, Inc. 3000 Northwoods

More information

Discipline Electro-Technical Calibration Issue Date Certificate Number C-0556 Valid Until Last Amended on - Page 1 of 7

Discipline Electro-Technical Calibration Issue Date Certificate Number C-0556 Valid Until Last Amended on - Page 1 of 7 SAC (ISRO)-TIMCD-Calibration, Space Applications Centre, Last Amended on - Page 1 of 7 SOURCE 1. DC VOLTAGE $ 10 V 4.0 µv Using DC Reference Standard Fluke /734A(732B) 100 mv to 1V 0.66 µv to 4 µv Using

More information

For the National Voluntary Laboratory Accreditation Program

For the National Voluntary Laboratory Accreditation Program SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Intertek Japan K.K. Calibration Laboratory 3-2 Sunayama Kamisu Ibaraki 314-0255 JAPAN Ms. Masako Oyamada Phone: 81-465 89 2316 Fax: 81-465 89 2160 E-mail: masako.oyamada@intertek.com

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that E2b Calibration, LLC 521 Fifth Avenue Chardon, OH 44024 has been assessed

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CENTURY LABS II dba CENTURY CALIBRATIONS 1929 Lakeview Drive Fort Wayne, Indiana 46808 Robin Bork Phone: 260 471 1673 CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ACUCAL INC. 600 South 56th Street Chandler, AZ 85226 Thomas Efaw Phone: 480 753 7000 CALIBRATION Valid To: September

More information

President For the Accreditation Council Certificate Number Valid to January 31, 2010

President For the Accreditation Council Certificate Number Valid to January 31, 2010 A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY HAYES INSTRUMENT SERVICE, INC. Billerica, MA for technical competence in the field of Calibration This laboratory

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wintronics, Inc. 50 Division Ave Millington,

More information

ACCREDITED LABORATORY

ACCREDITED LABORATORY THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY A2LA has accredited FLUKE ELECTRONICS Carrollton, TX for technical competence in the field of Calibration The accreditation covers

More information

Price List. Effective date 29 Sep of 13. Electrical Metrology Department. National Institute of Metrology (Thailand)

Price List. Effective date 29 Sep of 13. Electrical Metrology Department. National Institute of Metrology (Thailand) National Institute of Metrology (Thailand) 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 12120, Thailand Tel. +66 2577 5100 (Please contact customer Service Section: Ext. 3101, 3102 and 3103), Fax. +66

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMETEK CO., LTD. NAGOYA OFFICE. (Main Laboratory) Onna, Atsugi-shi, Kanagawa-ken, Japan

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMETEK CO., LTD. NAGOYA OFFICE. (Main Laboratory) Onna, Atsugi-shi, Kanagawa-ken, Japan SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AMETEK CO., LTD. NAGOYA OFFICE (Main Laboratory) 5-1-1 Onna, Atsugi-shi, Kanagawa-ken, 243-0032 Japan (Commercial Office) 1-329 Kifune, Meito-ku Nagoya-shi,

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 6 Contact: Mr J Puttock Spectrum Business Estate Tel: +44 (0)1622 690187 Bircholt Road Fax: +44 (0)1622 678827 Parkwood E-Mail: jonputtock@aol.com

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Lockheed Martin Stennis IMC Bldg 5100 Stennis

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY TESTING SERVICES, INC. 2305 Millpark Drive Maryland Heights, MO 63043 Heather Ryan Phone: 314 770 0607 CALIBRATION Valid To:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Instrument Company, Inc. 332 North Fries

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453 8003 CALIBRATION Valid To: March 31, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 13725 SW Karl Braun Drive Beaverton, OR 97077 Andrew Mumford Phone: 503 627 2476 CALIBRATION Valid to: August 31, 2018

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Dale Robenault Phone: 734 451 8740 CALIBRATION Valid To: September 30,

More information

April 10, 2018 VIA . Gore Laboratories, Inc. Jeff Buechler 10 Northern Blvd., Suite 5 Amherst, NH 03031

April 10, 2018 VIA  . Gore Laboratories, Inc. Jeff Buechler 10 Northern Blvd., Suite 5 Amherst, NH 03031 April 10, 2018 VIA EMAIL Gore Laboratories, Inc. Jeff Buechler 10 Northern Blvd., Suite 5 Amherst, NH 03031 Re: Extension for ISO/IEC 17025: 2005 accreditation Dear Jeff: This letter is to inform you that

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Upstate Metrology, Inc. 6388 Niver Rd Conesus,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: 613 226 7920 CALIBRATION Valid To: September 30, 2020 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TEST EQUIPMENT CORP. 10401 Roselle Street San Diego, CA 92121 Gabriel Alcala Phone: 858 558 6500 CALIBRATION Valid To: April

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Wilmington Instrument Company, Inc. 332 North

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 HAYES INSTRUMENT SERVICE, INC. 530 Boston Road Billerica, MA 01821 Tony Ganchi Phone: 978 663 4800 CALIBRATION Valid until: January

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration, Inc. 1 Industrial

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019

More information

7051Plus / 5051Plus. Extended Specification

7051Plus / 5051Plus. Extended Specification 7051Plus / 5051Plus Extended Specification V1.1 Time Electronics, Botany Industrial Estate,Tonbridge, Kent, TN9 1RH England Tel: 44 (0)1732 355993 Fax: 44 (0) 1732 770312. E-mail: mail@timeelectronics.co.uk

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Pte. Ltd. Blk

More information

SDM3045X Digital Multimeter. DataSheet

SDM3045X Digital Multimeter. DataSheet SDM3045X Digital Multimeter DataSheet-2016.06 User-friendly Design Product Overview SDM3045X is a 4½ digit digital (60000 count) multimeter incorporating a dual-display and is especially well suited for

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NOVASTAR METROLOGY 35200 Plymouth Road Livonia, MI 48150 Guy Howe Phone: 734 453-8003 CALIBRATION Valid To: July 31, 2017 Certificate

More information

Lab 2: Linear and Nonlinear Circuit Elements and Networks

Lab 2: Linear and Nonlinear Circuit Elements and Networks OPTI 380B Intermediate Optics Laboratory Lab 2: Linear and Nonlinear Circuit Elements and Networks Objectives: Lean how to use: Function of an oscilloscope probe. Characterization of capacitors and inductors

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 WESCAN CALIBRATION #9-12240 Horseshoe Way Richmond, B.C., V7A 4X9, Canada Malcolm Smith Phone: 604 275 0600

More information

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual. Manual Title: 5502E Getting Started Supplement Issue: 3 Part Number: 4155211 Issue Date: 9/18 Print Date: November 2012 Page Count: 12 Revision/Date: This supplement contains information necessary to ensure

More information

ACCREDITED LABORATORY

ACCREDITED LABORATORY A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY J. H. METROLOGY CO., INC. Rolling Meadows, IL for technical competence in the field of Calibration This laboratory

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS 8203-J Piedmont Triad Parkway Greensboro, NC 27409 Gene Denmark Phone: 336 605 1665 Fax: 336

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 HN PROFICIENCY TESTING INC. 10219 Coral Reef Way Indianapolis, IN 46256 Henrik Nielsen Phone: 317 713 2988 Web: http://www.hn-proficiency.com/ PROFICIENCY TESTING

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SERVICE, INC., A TEST EQUIPMENT REPAIR CORPORATION company 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen

More information

Solutions In Calibration TRANSMILLE PRODUCT GUIDE 2015/16 PROVIDING SOLUTIONS IN CALIBRATION WORLDWIDE. www. transmillecalibration.

Solutions In Calibration TRANSMILLE PRODUCT GUIDE 2015/16 PROVIDING SOLUTIONS IN CALIBRATION WORLDWIDE. www. transmillecalibration. TRANSMILLE PRODUCT GUIDE 2015/16 PROVIDING SOLUTIONS IN CALIBRATION WORLDWIDE PRODUCT MATRIX WORKLOAD Multiproduct Calibrators Electrical Test Equipment Calibrator 1000 3000A 4000 9000A 3200B DMMS Up to

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that ARREGA TECNOLOGIA, SAPI, DE CV/ARREGA INDUSTRIAL

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX CANADA 400 Britannia Road E, Unit 2 Mississauga, Ontario L4Z 1X9 Canada Andrew Sweeny Phone: 905 241 3021 CALIBRATION Valid

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Precision Repair and Calibration 9150 Isanti

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that DGI Metrology/Dimensional Gauge Company 2144

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CERTIFIED MEASUREMENTS, INC. 510 N Houston Lake Blvd. Centerville, GA 31028 Deborah J. Nazimiec Phone: 478 953 5171 CALIBRATION Valid To: May 31, 2020 Certificate

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Transcat Charlotte 8334 Arrowridge Blvd.,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 INDUSTRIAL PROCESS MEASUREMENT, INC. 3910 Park Avenue, Unit 7 Edison, NJ 08820 Mark Gural Phone: 732 632 6400 www.instrumentation2000.com

More information

TRACEABLE MEASUREMENT CAPABILITY

TRACEABLE MEASUREMENT CAPABILITY PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 050 Issue date: 11 September 2017 0310 DPN 175 Lammas Road Corby Northamptonshire NN17 5JF Contact: Mr S MacLeod Tel: +44 (0)1536

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHSTAR CALIBRATION, INC. 1045 26th Place NW Owatonna, MN 55060 John Moorhouse Phone: 507 444 9111 CALIBRATION Valid To: February 29, 2020 Certificate Number:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 SIMCO SCIENTIFIC INSTRUMENT REPAIR AND CALIBRATION SERVICES CO., LTD. Flat 404 North Software Tower, NanSha IT Park Panyu NanSha, Guangzhou,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. 3947 Lincoln Ave., Ste. B Groves, TX 77619 Jerry Kraus Phone: 432 580 7040 CALIBRATION Valid To: February 29,

More information

CALIBRATION CMC 2, 4 ( )

CALIBRATION CMC 2, 4 ( ) SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TEST EQUIPMENT CORP.. 104011 Roselle Street San Diego, CA 92121 Jill Berg Phone: 858 558 6500 CALIBRATION Valid To: April 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 9902 East 43 RD Street Suite D Tulsa, OK 74146 Mark Jackson Phone: 800 438 8165 CALIBRATION Valid To: September 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TESTEQUITY LLC 6100 Condor Drive Moorpark, CA 93021 Ed Yankajtis Phone: 805 498 9933 CALIBRATION Valid To: October

More information

This annex is valid from: to Replaces annex dated:

This annex is valid from: to Replaces annex dated: Premises: (Son) & Nijmegen LF 0 0 DC/LF Quantities LF 1 0 DC Voltage measuring and generating 10 V 5 10-7 U zenerreferences 1 V and 1.018 V 2.3 10-6 U zenerreferences 0 V to 10 V 0.3 V 10 V to 200 mv 3

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration Vietnam LTD.

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: 613 226 7920 CALIBRATION Valid To: September 30, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ASSOCIATED CALIBRATION, INC. DBA A-CAL 4583 E Eisenhower Circle Anaheim, CA 92807 Marshall Doyle Phone: 714 696 5300 CALIBRATION Valid To: January 31, 2019

More information

When you have completed this exercise, you will be able to determine the frequency response of an

When you have completed this exercise, you will be able to determine the frequency response of an RC Coupling When you have completed this exercise, you will be able to determine the frequency response of an oscilloscope. The way in which the gain varies with frequency is called the frequency response.

More information

ANSI-ASQ National Accreditation Board/ACLASS

ANSI-ASQ National Accreditation Board/ACLASS ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Precision Repair and Calibration 9150 Isanti Street NE Blaine, MN 55449 Jane McDougall

More information

in the genrad tradition

in the genrad tradition 516-334-5959 800-899-8438 sales@ietlabs.com Fax: 516-334-5988 Short Form Catalog Resistance Capacitance Inductance RTD Simulators Micro-Ohmmeters Voltage Dividers Variacs Sound Meters Stroboscopes V/I

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 SIMCO ELECTRONICS - DRAPER, UTAH 65 E. Wadsworth Park Drive Suite 101 Draper, UT 84020 Curtis Keller Phone:

More information

RS Pro DIGITAL MULTI-METER SDM3055 SERIES

RS Pro DIGITAL MULTI-METER SDM3055 SERIES ENGLISH Product Datasheet Stock No: 1236465 1236466 RS Pro DIGITAL MULTI-METER SDM3055 SERIES Product Overview RSDM3055 is a digital multimeter designed with 5 ½ digits readings resolution and dual-display,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN Connie Foster Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN Connie Foster Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN 37062 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: May 31, 2019 Certificate Number: 1741.08

More information

ANADOLU UNIVERSITY FACULTY OF ENGINEERING AND ARCHITECTURE DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

ANADOLU UNIVERSITY FACULTY OF ENGINEERING AND ARCHITECTURE DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING ANADOLU UNIVERSITY FACULTY OF ENGINEERING AND ARCHITECTURE DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EEM 206 ELECTRICAL CIRCUITS LABORATORY EXPERIMENT#3 RESONANT CIRCUITS 1 RESONANT CIRCUITS

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Arrega Tecnologia, SAPI, de CV/Arrega Industrial

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONNECTICUT CALIBRATION LABS 327 S. Main Street Newtown, CT 06470 Joseph Zeolla Phone: 203 270 1263 CALIBRATION Valid To: October 31,

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Techmaster Electronics, Inc. 46782 Lakeview

More information

TR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:

TR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By: CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL LF METROLOGY Approved By: Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of Approval: 2015-08-26 Date of

More information

Calibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7.

Calibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7. IAS Accreditation Number CL-132 Accredited Entity Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain Contact Name Mr. Masood Khatib Mr. Raja Kalimuthu Telephone +973 17727450

More information

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual. Manual Title: 550A Getting Started Supplement Issue: Part Number: 415509 Issue Date: 9/18 Print Date: November 01 Page Count: 19 Revision/Date: This supplement contains information necessary to ensure

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PRESSURE Hydraulic Pressure (Gauge) Hewett Road Gapton Hall Industrial Estate Great Yarmouth Norfolk NR31 0NN Contact: Mr J Gunn Tel: +44

More information

ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company

ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company ACLASS Accreditation Services An ANSI-ASQ National Accreditation Board Company SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Oscilloscope Services 7827 Kingsley Houston, TX. 77087 Bill Whitworth Phone:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TRESCAL, INC. 5965 Shiloh Road East Alpharetta, GA 30005 Don Petersen Phone: 678 341 6090 CALIBRATION Valid To:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APTIV CONTRACT SERVICES. S. DE R. L. DE C. V. CALIBRATION LAB Mexico Technical Center Ave. Hermanos Escobar #5756 Cd. Juarez, Chihuahua C.P. 32310, Mexico Ricardo

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TEKTRONIX INC. 8020 Southpark Circle, Suite 300 Littleton, CO 80120 William Gottbreht Phone: 303 539 1400 CALIBRATION Valid To: September

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),

More information