C: With I C Interface. Output Voltage I: AC Inlet(IEC320-C14) T: Terminal Block RCP DC VOLTAGE 48V RATED CURRENT 21A CURRENT RANGE

Size: px

Start display at page:

Download "C: With I C Interface. Output Voltage I: AC Inlet(IEC320-C14) T: Terminal Block RCP DC VOLTAGE 48V RATED CURRENT 21A CURRENT RANGE"

Cecilia Davis
5 years ago
Views:

Jameco SKU Number: 09093 0 ~ 3000W Front End ower System RC s e ries SELECTION GUIDE (Note.

With I C Interface -: Without I C Interface Output Voltage I: AC Inlet(IEC30-C4) T: Terminal Block MODEL RC-0- RC-0-4 RC-0-48 DC VOLTAGE V 4V 48V RATED CURRENT 60A 40A A CURRENT RANGE 0 ~ 60A 0 ~ 40A

1 Jameco SKU Number: ~ 3000W Front End ower System RC s e ries SELECTION GUIDE (Note.7) Single Unit: RC-0- - C Rack: RC-U I Whole System: RC-3KU I - - C SECIFICATION - Single Unit C: With I C Interface -: Without I C Interface Output Voltage I: AC Inlet(IEC30-C4) T: Terminal Block C: With I C Interface -: Without I C Interface Output Voltage I: AC Inlet(IEC30-C4) T: Terminal Block MODEL RC-0- RC-0-4 RC-0-48 DC VOLTAGE V 4V 48V RATED CURRENT 60A 40A A CURRENT RANGE 0 ~ 60A 0 ~ 40A 0 ~ A RATED OWER 70W 960W 8W RILE & NOISE (max.) Note. 50mVp-p 00mVp-p 300mVp-p OUTUT VOLTAGE ADJ. RANGE.6 ~.4V 3. ~ 4.8V 46.3 ~ 49.7V VOLTAGE TOLERANCE Note.3.0%.0%.0% LINE REGULATION 0.5% 0.5% 0.5% LOAD REGULATION SETU, RISE TIME HOLD U TIME (Typ.) 0.5% 0ms, 60ms/30VAC at full load 6ms/30VAC at full load 0.5% 0.5% VOLTAGE RANGE Note.5 90 ~ 64VAC 7 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz INUT EFFICIENCY (Typ.) 8% 87% 89% AC CURRENT (Typ.) 8.5A/5VAC 4.5A/30VAC 0.5A/5VAC 5.5A/30VAC A/5VAC 5.5A/30VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT COLD START 50A <.ma / 30VAC 05 ~ 5% rated output power OVERLOAD rotection type : Constant current limiting, recovers automatically after fault condition is removed ROTECTION OVER VOLTAGE 3. ~ 6.V 6.4 ~ 3.4V 5.8 ~ 64.8V rotection type : Shut down o/p voltage, re-power on to recover OVER TEMERATURE 75 5 (TSW) detect on heatsink of power transistor 85 5 (TSW) detect on heatsink of power diode rotection type : Shut down o/p voltage, recovers automatically after temperature goes down File Name:RC series-sec

2 Jameco SKU Number: ~ 3000W Front End ower System RC s e ries MODEL FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS AUXILIARY OWER REMOTE ON/OFF CONTROL REMOTE SENSE DC OK SIGNAL AC FAIL SIGNAL OUTUT VOLTAGE TRIM OVER TEM WARNING WORKING TEM. WORKING HUMIDITY STORAGE TEM., HUMIDITY TEM. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION ACKING RC-0- RC-0-4 RC A By electrical signal or dry contact ON:short OFF:open Compensate voltage drop on the load wiring up to 0.5V Open collector signal, on when Vout 80% 5%, max. sink current:0ma Open collector signal, refer to function manual Adjustment of output voltage, possible between 90 ~ 0% of rated output Logic " High" for over temperature warning, refer to function manual -0 ~ +60 (Refer to output load derating curve) 0 ~ 90% RH non-condensing -40 ~ +85, 0 ~ 95% RH 0.0%/ (0 ~ 50 ) 0 ~ 500Hz, G 0min./cycle, 60min. each along X, Y, Z axes UL60950-, TUV EN approved I/-O/:3KVAC I/-FG:.5KVAC O/-FG:0.7KVDC I/-O/, I/-FG, O/-FG:M Ohms/500VDC Compliance to EN550 (CISR) Class B Compliance to EN60-3-,-3 Compliance to EN60-4-,3,4,5,6,8,, ENV5004, EN60-6- (EN5008-), heavy industry level, criteria A 43.4Khrs min. MIL-HDBK-7F (5 ) 95*7*4mm (L*W*H).9Kg; 6pcs/.5Kg/.04CUFT SECIFICATION - Rack System MODEL OUTUT INUT FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE MODULE RACK OUTUT VOLTAGE MAX. OUTUT CURRENT MAX. OUTUT OWER Note.6 60W VOLTAGE RANGE RC-3KU - RC-3KU -4 RC-3KU -48 RC-0- RC-0-4 RC-0-48 RC-UI or RC-UT V 80A Note.5 90 ~ 64VAC 7 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz AC CURRENT (Typ.)FOR EACH UNIT 8.5A/5VAC 4.5A/30VAC 0.5A/5VAC 5.5A/30VAC A/5VAC 5.5A/30VAC LEAKAGE CURRENT <3.5mA / 30VAC AUXILIARY OWER 0.3A REMOTE ON/OFF CONTROL By electrical signal or dry contact ON:short OFF:open REMOTE SENSE DC OK SIGNAL AC FAIL SIGNAL OUTUT VOLTAGE TRIM OVER TEM WARNING WORKING TEM. WORKING HUMIDITY STORAGE TEM., HUMIDITY TEM. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE HARMONIC CURRENT EMS IMMUNITY The TTL signal out, refer to function manual The TTL signal out, refer to function manual -0 ~ +60 (Refer to output load derating curve) 0 ~ 90% RH non-condensing -40 ~ +85, 0 ~ 95% RH 0.0%/ (0 ~ 50 ) 0 ~ 500Hz, G 0min./cycle, 60min. each along X, Y, Z axes UL60950-, TUV EN approved I/-O/:3KVAC I/-FG:.5KVAC O/-FG:0.7KVDC ISOLATION RESISTANCE I/-O/, I/-FG, O/-FG:M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN550 (CISR) Class B Compliance to EN60-3-,-3 4V 0A 880W DIMENSION Rack 483.6*350.8*44(L*W*H) ACKING Kg; pcs/kg/.67cuft File Name:RC series-sec V 63A 304W Compensate voltage drop on the load wiring up to 0.5V. "Local Sense"should be connected in order to get the correct output voltage if the "Remote Sense"is not used Adjustment of output voltage, possible between 90 ~ 0% of rated output Logic " High" for over temperature warning, refer to function manual Compliance to EN60-4-,3,4,5,6,8,, ENV5004, EN60-6- (EN5008-), heavy industry level, criteria A

3 Jameco SKU Number: ~ 3000W Front End ower System RC s e ries Mechanical Specification (Single Unit) Case No. 95A Unit:mm CN DC OK AC OK Air flow direction Input / Output Connector in No. Assignment(CN50) : ostronic CIB4W9M400A in No. Assignment in No. Assignment in No. Assignment in No. Assignment Mating Housing,,4 +V 0 AC_OK 5 +5V_AUX 0 A 3,5,6 -V DC_OK 6 GND_AUX A ostronic 7 ON/OFF CS 7 SDA FG CIB4W9F400A 8 +S 3 V_TRIM 8 SCL 3 AC/ L 9 -S 4 T_ALARM 9 A0 4 AC/ N Block Diagram FC fosc : 0KHz WM fosc : 90KHz I/ EMI FILTER ACTIVE INRUSH CURRENT LIMITING RECTIFIERS & FC OWER SWITCH- ING O.L.. RECTIFIERS & FILTER CURRENT SHARE ORING DIODE +S +V -V -S CURRENT SHARE FC CONTROL WM CONTROL DETECTION CIRCUIT V_TRIM O.V.. RECTIFIERS CONTROL ON/OFF I C FUNCTION OTIONAL I C ON/OFF AUX OWER FAN DETECTION CIRCUIT RECTIFIERS & FILTER AC_OK DC_OK T_ALARM AUX OWER (5V/0.3A) AUX GND File Name:RC series-sec

4 Jameco SKU Number: ~ 3000W Front End ower System RC s e ries Mechanical Specification (Rack System) Case No. 959A Unit:mm Fig ADDRESS SWITCH - + CN RC-UT LC NC LB NB LA NA 3 Mounting Bracket 0 8 ADDRESS SWITCH C B A CN500 5 RC-UI M5 L=6mm M5 L=6mm Air flow direction Module C Module B Module A DC OK AC OK DC OK AC OK DC OK AC OK File Name:RC series-sec

5 Jameco SKU Number: ~ 3000W Front End ower System RC s e ries CN500 in No. Assignment Connector in No. Assignment(CN500) : D-Type Right Angle 5 positions in No. Assignment in No. Assignment in No. Assignment in No. Assignment in No. Assignment ON/OFF-A 6 +5V-AUX V-TRIM-B 6 AC-OK-C -S AC-OK-A 7 GND-AUX T-ALARM-B 7 DC-OK-C +V 3 DC-OK-A 8 ON/OFF-B 3 NC 8 V-TRIM-C 3 SCL 4 V-TRIM-A 9 AC-OK-B 4 CS 9 T-ALARM-C 4 SDA 5 T-ALARM-A 0 DC-OK-B 5 ON/OFF-C 0 +S 5 -V CN500 IN/OUT Connector pins function description in No. Function Description,8,5 ON/OFF Each unit can separately turn the output on and off by electrical or dry contact between ON/OFF A,B,C(pin,8,5) and -S(pin ). Short: ON, Open:OFF.,9,6 AC-OK Low : When the input voltage is 8Vrms +/-4V. High : when the input voltage in 8Vrms +/-4V. 3,0,7 DC-OK High : When the Vout 80%+/-5%. Low : When Vout 80%+/-5% 4,,8 V-TRIM Connection for output voltage trimming. The voltage can be trimmed within its defined range. 5,,9 T-ALARM High : When the internal temperature is within safe limit. Low : 0 below the thermal shut down limit. 6 +5V-AUX Auxiliary voltage output, 4.3~5.3V, referenced to GND-AUX(pin 7). The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by the remote ON/OFF control GND-AUX Auxiliary voltage output GND. The signal return is isolated from the output terminals (+V & -V). CS Current sharing signal. When units are connected in parallel, the CS pins of the units should be connected to allow current balance between units. +S -S ositive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.5V. +V ositive output voltage. For local sense use only, can't be connected directly to the load. 3 SCL Serial clock used in the I C interface option. Refer to the I C interface description. 4 SDA Serial data used in the I C interface option. Refer to the I C interface description. 5 -V Negative output voltage. For local sense use only, can't be connected directly to the load. Derating Curve Static Characteristics Ta=5 LOAD (%) 40 0 LOAD (%) AMBIENT TEMERATURE ( ) INUT VOLTAGE (VAC) 60Hz File Name:RC series-sec

6 Jameco SKU Number: ~ 3000W Front End ower System RC s e ries Function Manual. Remote ON/OFF Control The SU can be turned ON/OFF together or separately by using the "Remote ON/OFF" function. RC-U ON/OFF A ON/OFF B ON/OFF C 8 ON/OFF A 8 5 ON/OFF B 5 ON/OFF C RC-U Between ON/OFF and -S SW Open Output OFF -S -S SW Short ON. Voltage Drop Compensation. Remote Sense The remote sense compensates voltage drop on the load wiring up to 0.5V. RC-U +V +S -S -V 0 +V -V LOAD Sense lines should be twisted in pairs. Local Sense Notice : The +S,-S have to be connected to the +V,-V terminals locally in order to get the correct output voltage if the remote sensing is not used. RC-U +V +S -V -S Output Voltage Trimming Output voltage can be trimmed between 90~0% of its rated value by the following method. RC-U 0 +S 4 V-TRIM-A V-TRIM-B 8 V-TRIM-C -S R R R R R R 3. RC-0- Vout (%) Vout (%) K 40K 350K 560K.M NC R ( ) min. 0.W NC 300K 0K 6K 3K 3K R ( ) min. 0.W File Name:RC series-sec

7 Jameco SKU Number: ~ 3000W Front End ower System RC s e ries 3. RC-0-4 Vout (%) Vout (%) K 750K M.6M 3.3M NC R ( ) min. 0.W NC 330K 30K 6K 30K 0K R ( ) min. 0.W 3.3 RC-0-48 Vout (%) Vout (%) M.7M.4M 3.6M 7.6M NC R ( ) min. 0.W NC 345K 40K 70K 36K 5K R ( ) min. 0.W 4. Front anel Indicators & Corresponding Signal at Function ins Function LED Description AC-OK ON When input voltage 8V 4V AC-NG OFF When input voltage 8V 4V DC-OK ON When output voltage 80% 5% of Vo rated. DC-NG OFF When output voltage 80% 5% of Vo rated. T-OK T-ALARM When the internal temperature (TSW & TSW short) is within safe limit When the internal temperature (TSW or TSW open) exceeds the limit of temperature alarm *Signal between function pin and "-S". * Signal 0 ~ 0.5V 4.5 ~ 5.5V 0 ~ 0.5V 4.5 ~ 5.5V 0 ~ 0.5V 4.5 ~ 5.5V SU Output ON OFF ON ON ON OFF 5. I C Bus Interface Option 5. Addressing(A0,A,A) The DI switch down position is logic level "" and the up position is level "0". Address are applicable when modules RC-0 I C function are used. ON OFF Module A Module B Module C Address dip switch setting A A 5 8 A0 4 7 Module A B C File Name:RC series-sec

8 0W~3000W Front End ower System RC-0 series MODEL:RC-0-4 OUTUT FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT RILE & NOISE V: 00 mvp-p (Max ) I/: 30VAC O/:FULL LOAD V: 38 mvp-p (Max ) OUTUT VOLTAGE ADJUST RANGE CH: 3. V~ 4.8 V I/: 30 VAC I/: 5 VAC O/:MIN LOAD.9.9 V~ V~ V/ 30 VAC V/ 5 VAC 3 OUTUT VOLTAGE TOLERANCE V: %~ - % (Max) I/: VAC / 64 VAC O/:FULL/ MIN LOAD V: 0.05 %~ % 4 LINE REGULATION V: 0.5 %~ -0.5 % (Max) I/: VAC ~ 64 VAC O/:FULL LOAD V: 0.03 %~ % 5 LOAD REGULATION V: 0.5 %~ -0.5 % (Max) I/: 30 VAC O/:FULL ~MIN LOAD V: 0.05 %~ % 6 SET U TIME 30VAC: 0 ms (Max) I/: 30 VAC 30VAC/ 8 ms O/:FULL LOAD 7 RISE TIME 30VAC: 60 ms (Max) I/: 30 VAC 30VAC/ 9 ms O/:FULL LOAD 8 HOLD U TIME 30VAC: 6 ms (TY) I/: 30 VAC 30VAC/ 8.9 ms O/:FULL LOAD 9 OVER/UNDERSHOOT TEST < +5% I/: 30 VAC O/:FULL LOAD 0 DYNAMIC LOAD V: 400 mvp-p I/: 30 VAC O/:FULL /Min LOAD 90%DUTY/KHZ TEST: <5 % 584 mvp-p Model: RC-0-4 Test Report / 6

9 0W~3000W Front End ower System RC-0 series INUT FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT INUT VOLTAGE RANGE 90VAC~64 VAC INUT FREQUENCY RANGE 47HZ ~63 HZ 3 OWER FACTOR NO DAMAGE OSC I/:TESTING O/:FULL LOAD I/: LOW-LINE-3V= 87V HIGH-LINE+5%=300 V O/:FULL/MIN LOAD ON: 30 Sec. OFF: 30 Sec 0MIN ( AC OWER ON/OFF NO DAMAGE ) I/: 90 VAC ~ 64 VAC O/:FULL~MIN LOAD 83V~64V TEST: OK TEST: OK 0.96 / 30 VAC(TY) I/: 30 VAC F= / 30 VAC 0.96 / 5 VAC(TY) I/: 5 VAC O/:FULL LOAD 4 EFFICIENCY 87 % (TY) I/: 30 VAC 5 INUT CURRENT O/:FULL LOAD F= / 5 VAC 87.4% 30V/ 5.5 A (TY) I/: 30 VAC I = 4.9 A/ 30 VAC 5V/ 0.5 A (TY) I/: 5 VAC O/:FULL LOAD I = 0. A/ 5 VAC 6 INRUSH CURRENT 30V/ 50 A (TY) I/: 30 VAC I = 45 A/ 30 VAC COLD START O/:FULL LOAD 7 LEAKAGE CURRENT <. ma / 30 VAC I/: 64 VAC (SINGLE UNIT) O/:Min LOAD L-FG: 0.85 ma N-FG: 0.85 ma < 3.5 ma / 30 VAC I/: 64 VAC (RACK SYSTEM) O/:Min LOAD L-FG: N-FG:.9.9 ma ma ROTECTION FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT OVER LOAD ROTECTION 05 %~ 5 % I/: 30 VAC I/: 5 VAC O/:TESTING 0%/ 30 VAC 0%/ 5 VAC Constant Current Limiting OVER VOLTAGE ROTECTION CH: 6.4 V~ 3.4 V I/: 30 VAC I/: 5 VAC O/:MIN LOAD 9.5 V/ 30 VAC 9.5 V/ 5 VAC Shunt down Re- power ON 3 OVER TEMERATURE ROTECTION SEC: TSW: O.T.. TSW: O.T.. NO DAMAGE I/: 30 VAC O/:FULL LOAD O.T.. Active Shut down o/p voltage,recovers automatically after temperature goes down 4 SHORT ROTECTION SHORT EVERY OUTUT HOUR NO DAMAGE I/: 64 VAC O/:FULL LOAD NO DAMAGE Constant Current Limiting Model: RC-0-4 Test Report / 6

10 0W~3000W Front End ower System RC-0 series CONTROL FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT FAN LOCK TEST FAN LOCK :OWER OFF I/: 30 VAC FAN LOCK :OWER OFF FAN UNLOCK :OWER ON O/:FULL LOAD FAN UNLOCK :OWER ON FAN SEED CONTROL Fan Voltage : NO LOAD:8.7V + V % LOAD:.8V + 0.6V I/: 30 VAC O/:TESTING Fan Voltage: NO LOAD: 8.6 V % LOAD:.8 V 3 REMOTE ON/OFF ON/OFF~ -S SHORT : OWER ON ON/OFF~ -S OEN : OWER OFF that is shown in Function Manual. (SEC) I/: 30 VAC O/:FULL LOAD ON/OFF& -S SHORT : OWER ON ON/OFF& -S OEN : OWER OFF 4 AC OK Signal Sink current 0 ma. When Input voltage > 8V + 4V: AC_OK ~-S : 0~0.5V Output ON/LED ON. When input voltage < 8V + 4V: AC_OK ~-S : 4.5~5.5V Output OFF / LED OFF that is shown in Function Manual 4. (SEC) I/: TESTING O/:FULL LOAD.Input voltage > 84V : AC_OK ~-S : 0V LED ON / SU Output ON. Input voltage < 8V : AC_OK ~-S: 5.0 V LED OFF / SU Output OFF 5 DC OK Signal Sink current 0 ma. When output voltage > 80% + 5%: DC_OK ~-S : 0~0.5V Output ON / LED ON. When output voltage < 80% + 5%: DC_OK ~-S : 4.5~5.5V Output OFF / LED ON that is shown in Function Manual 4. (SEC) I/: 30 VAC O/:FULL LOAD. Output voltage > 80 %: DC_OK ~-S: 0V LED ON / SU Output ON. Output voltage < 79%: DC_OK ~-S: 4.95 V LED OFF / SU Output ON 6 REMOTE SENSE >0.5V that is shown in Function Manual. (SEC) I/: 30 VAC O/:FULL LOAD >0.5V 7 Output voltage TRIM Adjustment of output voltage is possible between 90 %~0 % of rated output Connecting a resistor externally that is shown in Function Manual 3. (SEC) I/: 30 VAC O/:FULL LOAD External Resistor 90% Voltage= 50 KΩ 0% Voltage= 4 KΩ 8 OVER TEM ALARM.T-OK : When the TSW and TSW short : T-ALARM ~-S : 0~0.5V Output ON. T-ALARM: When the TSW or TSW open : T-ALARM ~-S : 4.5V~5.5V Output OFF that is shown in Function Manual 4. (SEC) I/: 30 VAC O/:FULL LOAD. T-ALARM ~-S : 0 V SU Output ON. T-ALARM ~-S: 5.0 V SU Output OFF 9 AUX ILIRY OWER (AUX) 0.3A (4.5V~5.3V) I/: 30 VAC O/:FULL LOAD 5.0V Model: RC-0-4 Test Report 3 / 6

11 0W~3000W Front End ower System RC-0 series ENVIRONMENT TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT TEMERATURE RISE TEST MODEL:RC-0-4. ROOM AMBIENT BURN-IN:.5HRS I/: 30VAC O/: FULL LOAD Ta= HIGH AMBIENT BURN-IN:3HRS I/: 30VAC O/: FULL LOAD Ta= 53.7 NO osition /N ROOM AMBIENT Ta= 36.5 HIGH AMBIENT Ta= 53.7 D CSD060A 0A/600V TSW ST U IR50S IR Q IRF37N50A 36A/500V IR BD D5XB60 5A/600V SHI L TF-457 LS LF TR C7 0U/450V HU D90 HER08 A/KV REC T COIL TF-558 LS Q906 SK6 9A/900V TOS L TF-455 LS D0 S60SC6M 60A/60V SHI U UCC80 TI TSW ST C0 0U/35V NCC 05 KY C75 470U/5V RUB 05 YXG U507 LM35DM NATIONAL OVER LOAD BURN-IN TEST NO DAMAGE HOUR ( MIN ) 3 LOW TEMERATURE TURN ON AFTER HOUR TURN ON TEST I/: 30 VAC O/: 8 % LOAD I/: 30 VAC O/: % LOAD Ta= -0 TEST:OK TEST:OK 4 HIGH HUMIDITY HIGH TEMERATURE HIGH VOLTAGE TURN ON TEST 5 TEMERATURE COEFFICIENT AFTER HOURS IN CHAMBER ON CONTROL 50 I/: 7 VAC O/:FULL LOAD Ta= 50 NO DAMAGE HUMIDITY= 95 %R.H %(0~50 ) I/: 30 VAC O/:FULL LOAD 6 VIBRATION TEST Carton & Set () Waveform: Sine Wave () Frequency:0~500Hz (3) Sweep Time:0min/sweep cycle (4) Acceleration:G (5) Test Time: hour in each axis (X.Y.Z) (6) TEST:OK %(0~50 ) TEST:OK Model: RC-0-4 Test Report 4 / 6

12 0W~3000W Front End ower System RC-0 series SAFETY TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT WITHSTAND VOLTAGE I/-O/: 3 KVAC/min I/-FG:.5 KVAC/min O/-FG: 0.7 KVDC/min I/-O/: 3.6 KVAC/min I/-FG:.8 KVAC/min O/-FG: 0.84 KVDC/min I/-O/:.7 ma I/-FG: 8.53 ma O/-FG: 0.00 ma NO DAMAGE ISOLATION RESISTANCE I/-O/:500VDC>MΩ I/-O/: 500 VDC I/-O/: 30 GΩ I/-FG: 500VDC>MΩ O/-FG:500VDC>MΩ I/-FG: 500 VDC O/-FG: 500 VDC I/-FG: 30 GΩ O/-FG: 5 GΩ NO DAMAGE 3 GROUNDING CONTINUITY FG(E) TO CHASSIS OR TRACE < mω 40 A / min 7 mω 4 AROVAL TUV: Certificate NO :R UL: File NO :E833 E.M.C TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT HARMONIC EN60-3- CLASS D I/: 30 VAC/50HZ O/:FULL LOAD ASS CONDUCTION EN550 I/: 30 VAC (50HZ) ASS CLASS B O/:FULL/50% LOAD Test by certified Lab 3 RADIATION EN550 I/: 30 VAC (50HZ) ASS CLASS B O/:FULL LOAD Test by certified Lab 4 E.S.D EN60-4- I/: 30 VAC/50HZ CRITERIA A INDUSTRY AIR:8KV / Contact:4KV O/:FULL LOAD 5 E.F.T EN I/: 30 VAC/50HZ CRITERIA A INDUSTRY INUT: KV O/:FULL LOAD 6 SURGE IEC I/: 30 VAC/50HZ CRITERIA A INDUSTRY L-N :KV O/:FULL LOAD L,N-E:4KV 7 Test by certified Lab & Test Report repare M.T.B.F & LIFE CYCLE CALCULATION NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT CAACITOR LIFE CYCLE RC-0-4 : SUOSE C0 IS THE MOST CRITICAL COMONENT I/: 30VAC O/:FULL LOAD Ta= 5 LIFE TIME= HRS I/: 30VAC O/:FULL LOAD Ta= 50 LIFE TIME= 7633 HRS MTBF MIL-HDBK-7F NOTICES ARTS COUNT TOTAL FAILURE RATE: 43.4K HRS Model: RC-0-4 Test Report 5 / 6

13 0W~3000W Front End ower System RC-0 series COMONENT STRESS TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT ower Transistor ( D to S) or (C to E) eak Voltage Q900 Rated SK08 : 900 V Diode eak Voltage D0 Rated S30JC0 : V 3 Clamp Diode eak Voltage D900 Rated BYM6E : KV 9A 30A.3 A I/:High-Line +3V = 67 V O/: ()Full Load Turn on () Output Short I/:High-Line +3V = 67 V O/: ()Full Load Turn on ()Output Short I/:High-Line +3V = 67 V O/: () Dynamic Load 90%Duty/KHz () 870 V () 830 V () 83.5 V () 46 V () 830 V 4 Input Capacitor Voltage C5 Rated : 0u / 450V/ 05 I/:High-Line +3V = 67 V O/: ()Full Load Turn on /Off () Min load Turn on /Off (3)Full Load /Min load Change () 404 V () 396 V (3) 404 V 5 Control IC Voltage Test U Rated UCC80D : 5 V I/:High-Line +3V = 67 V O/: ()Full Load Turn on /Off () Min load Turn on /Off (3)Full Load /Min load Change () 4 V () 4 V (3) 4 V DATE SAMLE TEST RESULT TESTER AROVAL 006/9/8 RD SAMLE ASS VINCENT TSENG MAX LIN 006//4 007//6 RODUCT SAMLE W060A30 RODUCT SAMLE W070B3 ASS VINCENT TSENG MAX LIN ASS VINCENT TSENG MAX LIN 003// A50-F03 Model: RC-0-4 Test Report 6 / 6

125W Single Output with PFC Function

125W Single Output with PFC Function Jameco SKU Number: 2102465 125W Single Output with FC Function S-125 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE