ARMATUREN. Electric thrust actuator. Electric actuator ARI-PREMIO. Electric thrust actuator ARI-PREMIO. Electric thrust actuator ARI-PRE MIO.

Transcription

1 AR-PRE MO ARMATUREN Electric thrust actuator Electric actuator AR-PREMO Electric thrust actuator AR-PREMO 2,2 5kN Page 2 Electric thrust actuator AR-PREMO 12-15kN Page4 Features sales@ultravalve.co.uk 2 torque switches Handwheel Operative ambient temperatures -20 C up to +70 C Enclosure P 65 Additional devices available, e.g. potentiometer Travel indicator

2 AR-PRE MO 2,2 5 kn Electric thrust actuator Electric actuator AR-PREMO 2,2 5 kn Synchronous motor 115VAC 230 VAC BLDC motor 24 VAC/DC Pos. Pos Gearbox Spindle safety feature Sealing plug 1 x M16x1, Slide Synchronous motor, complete 50.2/ Cable gland 2 x M16x1,5 Hood Hood seal Column Handwheel Spring washer Yoke Hexagon screw DN EN SO M10x T- head bolt DN 261-M12x Washer DN 128 -A Washer DN EN SO 7089 Hexagon nut DN EN SO M Lift dial Driving spindle Coupling Capacitor Board support, cpl. (incl. circuit board) Shift lever Cylinder screw DN EN SO M4x Connector, 3-pole (standard) Protective conductor terminal Cylinder screw DN EN SO M4x Threaded bush BoardAC/DC Bellow Washer DN 128-A10 Torsion safety feature sales@ultravalve.co.uk Flange nut Seal lock M6 BLDG motor Distance bolt M4x45 Cylinder screw M4x18

3 Technical data Type AR-PREMO 2,2 kn AR-PREMO 5 kn Thrust force kn 2,2 kn 5,0 kn AR-PRE MO 2,2 5 kn Technical data Operating speed mm/s 0,38 mm/s 0,38 mm/s 1,0 mm/s Travel distance max. mm 50 mm Duty classification in accordance with EN S3 80% ED / max c/h S3 50% ED / max c/h Supply voltage V-Hz 230 V - 50 Hz / 60 Hz 1l 230 V - 50/60 Hz 1l Motor type Synchronous motor Power consumption VA Torque switch 2 pcs., fixed wiring switching capacity 10 A, 250 V- Travel switch 1 pcs., fixed wiring switching capacity 10 A, 250 v- (Options trip slide necessary!) Enclosure EN P 65 Max. storage temperature oc -40 C C Max. permissible ambient temperature Hand operating device Operation oc -20 C C (For outdoor use and sub-zero temperatures, a heating is recommended!) Yes (always running) Max. cable cross section mm 2 3-step input: 2,5 mm 2 Mounting position Gear lubricant 3-step Any, except: motor not hanging downwards Kluber / lsoflex Topas NB152 Weight kg 5,4 kg 6,0 kg 6,5 kg Accessories refer to page Additional voltage / frequencies Synchronous motor Type AR-PREMO 2,2 kn AR-PREMO 5 kn Thrust force kn 2,2 kn 5,0 kn Operating speed mm/s 0,38 mm/s 0,38 mm/s 1,0 mm/s 115 V - 50/60 Hz 1l 115 V - 50/60 Hz 1l Supply voltage V-Hz V - 50/60 Hz 1l V - 50/60 Hz 1l Duty classification in accordance with EN Power consumption 24 V V: S3 80% ED / max c/h 400 V : S3 50% ED / max c/h refer to nameplate or on request S3 50% ED / max c/h BLDC motor (Brushless DC motor) Type AR-PREMO 2,2 kn AR-PREMO 5 kn Thrust force kn 2,2 kn 5,0 kn Operating speed mm/s 0,38 mm/s 0,38 mm/s Supply voltage V-Hz 24V- AC/DC Duty classification in accordance with EN S3 80% ED / max c/h Power consumption VA ,0 mm/s 72 1l Control speed and power consumption are 20% higher at frequency of 60 Hz sales@ultravalve.co.uk

4 AR-PREMO kn Electric thrust actuator Electric actuator AR-PREMO kn Synchronous motor 115VAC 230 VAC BLDC motor 24 VAC/DC Pos. Pos Gearbox Synchronous motor, complete Hood Cylinder screw DN EN SO 4762-M Cable gland 2 x M16 x 1,5 / 1 x M20 x 1, Hood seal Counter-sunk screw DN EN SO M5x Gasket DN EN SO , Spring washer Column Capacitor Board support, cpl. (incl. circuit board) Shift lever Cylinder screw DN EN SO M4x10 Protective conductor terminal Cylinder screw DN EN SO M4x Handwheel (engageable) Threaded bush Hexagon nut DN EN SO V-M Connector, 8-pole O-ring Spindle safety feature Board AC/DC Bellow Distance column ear clamp Driving spindle Coupling Torsion safety feature Grub screw DN SO M sales@ultravalve.co.uk O-ring DN x1,8 Gear cap Fan wheel BLDG motor Distance bolt M4x45 Cylinder screw M4x18

5 Technical data AR-PREMO kn Technical data Type AR-PREMO 12 kn AR-PREMO 15 kn Thrust force kn 12,0 kn 15,0 kn Operating speed mm/s 0,38 mm/s 0,79 mm/s 0,38 mm/s Travel distance max. mm 80 mm Duty classification in accordance with EN S3 50% ED / max c/h Supply voltage V-Hz 230 V- 50 Hz Motor type Synchronous motor Power consumption VA Torque switch 2 pcs., fixed wiring, switching capacity 16A, 250V- Travel switch 1 pcs., fixed wiring switching capacity 16A, 250V- (Options trip slide necessary!) Enclosure EN P 65 Max. storage temperature oc -40 C C Max. permissible ambient temperature Hand operating device Operation oc -20 C C (For outdoor use and sub-zero temperatures, a heating is recommended.) Yes (engageable) 3-step Max. cable cross section mm 2 3-step input: 2,5 mm 2 Mounting position Gear lubricant Any, except: motor not hanging downwards Molyduval Va lenzia H2 Weight kg 10,5 kg Accessories refer to page Additional voltage / frequencies Synchronous motor Type AR-PREMO 12 kn AR-PREMO 15 kn Thrust force kn 12,0 kn 15,0 kn Operating speed mm/s 0,38 mm/s 0,79 mm/s 0,38 mm/s 24 V - 50 Hz/ 24 V - 60 Hz 1 l Supply voltage V-Hz 115 V- 50 Hz / 115 V- 60 Hz 1 l 230 V - 60 Hz 1 l V - 50 Hz / V - 60 Hz 1 l Duty classification in accordance with EN S3 50% ED / max c/h Power consumption refer to nameplate or on request BLDC motor (Brushless DC motor) Type AR-PREMO 12 kn AR-PREMO 15 kn Thrust force kn 12,0 kn 15,0 kn Operating speed mm/s 0,38 mm/s 0,79 mm/s 0,38 mm/s Supply voltage V-Hz 24V- AC/DC Duty classification in accordance with EN S3 80% ED / max c/h Power consumption VA l Control speed and power consumption are 20% higher at frequency of 60 Hz sales@ultravalve.co.uk

6 Accessories Type AR-PREMO 2,2 kn - 15 kn Trip slide Required for actuating... the travel switch S3 / retracting spindle (the travel swith S3 is in the basic version of the actuator already available) - the potentiometer - the additional travel switches S4 / S5 Additional intermediate position Type Standard - 2 piece, zero potential, switching capacity 10 A, 250 V- switches S4, S5 Type low voltage AR-PRE MO Accessories - 2 pieces, zero potential, with gold contacts, switching capacity max. 0, 1 A, 4-30 V (for low switching capacities and at aggressive atmosphere gold contacts should be used) Potentiometer Conductive , 2000, 5000 Ohm; 1 Watt (at +70 C) (max. 2 pcs.) - Wiper current max. 0,01 ma recommended 0,002 ma Wire - 100, 200 Ohm; 0,5 Watt (at +70 C) (max. 2 pcs.) T0V-approved potentiometer (max. 2 pcs.) - Wiper current max. 35 ma / recommended 0,02 ma - TUV tested conductive plastic for use as a sensor for position feedback of control devices in electronic systems for controlling and monitoring of fuel, air and gas streams in combustion plants Ohm (standard) "' - or optional: 100, 200, 1000 Ohm; 1 Watt (at +70 C) "' G C G - Wiper current max. 0,01 ma recommended 0,002 ma - No retrofitting possible! Electronic position controller Type ES11 - nput signals 0(2)... 10V or 0 (4)... 20mA; (for controling the actuator with an analog - galvanically separation between power supply and control signal C control signal) - including potentiometers (note max. number of potentiometers) Type PREMO-Plus 2G (refer to seperate data sheet / operating instructions) - nput signals: 3-point, 0-10V or 4-20mA; - self-adaptation; - Optional position feedback; - galvanically separation between power supply and control signal Electronic position indicator Rl21 - analogue output for position-feetback 0(4)... 20mA changeable to 0(2)-10V, (for position feedback with an analog (only for AC) invertable; galvanically separation between power supply and control signal control signal) - active Rl32 - including potentiometers (note max. number of potentiometers) - analogue output for position-feetback V; ma - compact design; 2 (passive) or 4 wire technology (active) - Power supply: 24 V AC/DC - including potentiometers (note max. number of potentiometers) Heating Heating resistor - (automatic switching circuit) 230 VAC, 115VAC, 24VAC/DC, 15 Watt Connection board Type Standard PA - zero potential, switching capacity 1 0A, 250V- 2 Torque- and 1 Travel switch, all switch - (At 12/15kN already possible with the standard version) contacts are guided on terminals Type low voltage NA - zero potential, with gold contacts, switching capacity max. 0, 1 A, 4-30 V (for low switching capacities and at aggressive atmosphere gold contacts should be used) (Process-) controller Type - Mounted in the actuator Processcontroller dtron point stepping controller with 2 solid state relay outputs outputs for direct control of (only for AC) the PREMO actuators with a 3-point signal; - for resistance thermometers and thermocouples (provided by the customer) or standard signals, - Pre-configured for temperature control:: control range from -200 C up to +850 C (resistance thermometer) - Not compatible for use with the ES11! Special voltage 24 V AC/DC Board support for pole-changing Special voltage V ntegrated reversing contactor - For the control of the BLDG motor with pole-changing (2-wire technology). 1 - By reversing the polarity of the supply voltage, the motor rotation direction is changed (ON/ OFF) - Only 1 electronic module possible! 1 - At 2,2 kn - 5kN is no electronic in the actuator possible! sales@ultravalve.co.uk

7 AR-PRE MO Accessories so 612 Potentiometer ntermediate position switch Pos. Pos Board support Board support Trip slide Setting spindle for switch S Travel switch S Setting spindle for switch S Connecting cable Self- tapping screw Pinch spring Slide block so so 67 Pinion Connector, 6-pole Potentiometer Travel switch S Connector, 3-pole so Electronic position controller ES11 Motor type Synchronous motor BLDC motor Operating voltage Operating current without load nput control signal nput control signal Potentiometer input 3-point-Output Three-step switching current Output control signal Potentiometer input 50/60 Hz 24V-AC 115 V-AC 230 V-AC 50/60 Hz 150 ma 1B 50/60 Hz 50/60 Hz 40 ma 20 ma 0 (2) VDC - (R= 30 kohm) Yu Y,... 0 (4) madc - (R= 125 Ohm) Y 4 4 UA s 4Amax. UB 24 V-AC 50/60 Hz 115 V-AC 50/60 Hz 1230 V-AC 50/60 Hz Yu 0 (2) VDC - (load resistance> 1 kohm) active 150 ma 40 ma M kohm Electronic position indicator Rl32 Operating voltage Output control signal Output control signal Potentiometer input 24V- DC/AC 50/60 Hz UB VDC active ma DC - (load resistance max. 500 Ohm) oassive or active 100 Ohm kohm Yu Y Rp Board support for pole-changing for 24 V DC To control the 24V-AC/DC PRE MO-actuators with a 3-point 24V- DC signal or by pole-changing Comparison: Opening retracting stem DC 3-point (standard) Closing extending stem ov 0.c 0.,.c X t 0 X38 t + ov 0.c o.,.c X t +t 0 X DC pole-changing -t +t t t + sales@ultravalve.co.uk S Y -'Q' s -'@' N 20 ma 0 (4) ma DC - (load resistance max. 800 Ohm) active Y Rp vn Y 1...mAD kohm, recommended O... 1 kohm (Potentiometer can be used only as a voltaqe divider) 24 V- DC 24 V-AC 115 V-AC 230 V-AC Rp Operating current without load 18 Output control signal - UB Electronic position indicator Rl21 Operating voltage 24V- DC 24V-AC X37 X38 X37 X38 u. u.

8 ntegrated temperature controller dtron 316 Features programmable analogue input 2 auto-tune methods Program function with 8 program sections or slope-function 2 Timer functions 4 limit-comparators nterlock for keyboard and level 4 programmable setpionts, two parameter sets 4 digit resolution (max. 2 decimal places) Controller characteristic P, PD, Pl or PO Actual value input by usual temperature sensors (see in table) 2 relay outputs 230V/3A (shutter) 1 three-step output for actuator motor (by solid state relay 4A) 2 combinable binary inputs / binary outputs Block structure AR-PRE MO ntegrated temperature controller dtron 316 -,,-,, CJ _1. J 0"'.:i n n n c =,1_1u.1_1 Function in the AR-PREMO-thrust actuator Analogue input Binary input Binary input or or 12 relay 1 Logical output 1 Logical output Temperature sensor TTR dtron 316 M 7, WE (1,- S3 7 r 3-point-step output for actuator motor L DE S2 u, nput thermocouples Measuring range Fe-CuNi,,L" C Fe-CuNi,,J" DN EN C Cu-CuNi.U" C Cu-CuNi,,T" DN EN C NiCr-Ni,,K" DN EN C NiCr-CuNi,,E" DN EN C NiCrSi-NiSi,,N" DN EN C Pt10Rh-Pt,,S" DN EN C Pt13Rh-Pt,,R" DN EN C Pt30Rh-Pt6Rh,B" DN EN C W5Re-W26Re,G" C W3Re-W25Re,D" C W3Re-W26Re C nput resistance thermometer Type of connection Measuring range Pt 100 (standard) 2-wire / 3-wire / 4-wire C Pt wire / 3-wire / 4-wire C Pt wire / 3-wire / 4-wire C KTY wire C Sensor output resistance: max. 30Ohm each circuit at 3- and 4-wire connection Measurement current: approx. 250µA Circuit acjustment: - at 3- and 4-wire connection not necessary. - at 2-wire connection a circuit acjustment can be done with sofware by correcting the actual value. nput standardized active current or voltage signals Measuring range Voltage 0 (2)... 10V, input resistance Re> 100kOhm Current 0 (4)... 20mA, voltage drops 1,5 V sales@ultravalve.co.uk

9

10

11

12 AR-PRE MO Dimensions / X X A X B A X B C C :r: :r: 2,2-5kN Nominal travel > 30 mm - 50 mm 2,2-5kN Nominal travel max. 30 mm A B C 0D1 X H h (Nominal travel) 2,2-5kN max max. 50 / X A X B A B C 0D1 X H h (Nominal travel) L(Column) 12-15kN Nominal travel max. 80 mm sales@ultravalve.co.uk 622 max kN max max

13 ARMATUREN AR-PREMO -Plus 2G Electric thrust actuator Electric thrust actuator AR-PREMO -Plus 2G - Electric thrust actuator AR-PREMO -Plus 2G 2,2 5 kn 3? Page 2 Electric thrust actuator AR-PREMO -Plus 2G kn Page4 Features optional input signal: - 3-point from 12 to 250VAC/DC V -4-20mA automatic valve travel adaption economy function for extended lifetime emergency manual override handwheel standard contactless position determination optional thrust or travel switch sales@ultravalve.co.uk

14 AR-PREMO -Plus 2G 2,2 5 kn Electric thrust actuator ARMATUREN Electric thrust actuator AR-PREMO -Plus 2G 2,2 5 kn so so BLDC motor 24VAC/DC so 6 so 4 so so so so 175 so so 35 so so so 143 so 81 so so 195 BLOC motor VAC so 19 so 20 so "'_.._._ so Pos. Pos Gearbox Hexagon nut DN EN M Cable gland 2 x M16x1, Shift lever 50.4 Sealing plug 1 x M16x1, Spring washer 50.6 Hood Spring 50.7 Hood seal Cylinder screw DN EN SO M4x Column Protective conductor terminal Handwheel Cylinder screw DN EN SO M4x Yoke Cylinder screw DN EN SO M4x Washer DN 128-A Threaded bush Hexagon bolt DN EN SO M10x Washer SO T-head bolt DN 261-M12x Collar nut with sealing ring M Washer DN EN SO Protective cover Washer DN 128 -A Switch cover Hexagon nut DN EN SO M Trip sllide Lift dial Shakeproof washer Coupling Connector, 2-pole (Nil) Driving spindle Connector, 3-pole (L j/ LJ/ OV) Spindle safety feature Board support cpl. (incl. electronic) Torsion safety feature BLDG motor Slide Distance bolt M4x Bellow Connector, 4-pole (Y in/y out) Grub screw DN SO M Power supply, cpl Guide spindle Fixing bracket for power supply sales@ultravalve.co.uk

15 Technical data ARMATUREN AR-PREMO -Plus 2G 2,2 5 kn Type AR-PREMO-Plus 2G 2,2 kn AR-PREMO-Plus 2G 5 kn Thrust force kn 2,2 kn Operating speed mm/s 0,25 0,38 0,4 7 1,0 adjustable Travel distance max. mm 50mm Duty classification acc. to EN S3-80% ED / max c/h (at +70 C) Supply voltage V 24 VAC/DC Motor type BLDG (Brushless DC motor) Power consumption VA max. 65 (depends on the operating speed) Torque switch 2 pcs. included internally Enclosure EN P 65 Max. storage temperature c -40 c... +B5 c Max. permissible ambient -20 c c c temperature (For outdoor use and sub-zero temperatures, a heating is recommended!) Hand operating device Operation Yes (always running) optional: 3-point: 12 V AC/DC to 250 V AC/DC 0 to 10 V DC load resistance 500 kohm resolution 12 Bit 4 to 20 ma DC load resistance 125 Ohm resolution 12 Bit Supply voltage: 2,5 mm 2 Max. cable cross section 3-step input: 2,5 mm 2 Mounting position Characteristics at control signal failure Gear lubricant nput signals: 2,5 mm 2 Any, except: motor not hanging downwards adjustable with slide switch: OPEN, STOP, CLOSE Kluber / lsoflex Topas NB152 Weight kg 5,4 kg Aditional voltage refer to page 6 Accessories refer to page 6-8 5,0 kn Technical data sales@ultravalve.co.uk

16 AR-PREMO -Plus 2G kn Electric thrust actuator ARMATUREN Electric thrust actuator AR-PREMO -Plus 2G kn BLOC motor 24VAC/DC ' 'l'll!tr BLOC motor VAC Coupling 25kN Pos. Pos Gearbox Cylinder screw DN EN SO M4x / 50.3 Cable gland 2 x M16 x 1,5 / 1 x M20 x 1, Cylinder screw DN EN SO M4x Hood Threaded bush 50.7 Hood seal Washer SO Column Collar nut with sealing ring M6 Protective cover Handwheel (engageable) Flange Switch cover Federring DN 128 -A Trip sllide Distance column Shakeproof washer Hexagon nut DN EN SO M Connector, 2-pole (Nil) ear clamp Connector, 3-pole (L j/ Lt/ OV) Coupling Axial joint Driving spindle Board support cpl. (incl. electronic) Spindle safety feature BLDG motor Torsion safety feature Distance bolt M4x Bellow Connector, 4-pole (Y in/y out) Grub screw DN SO M Power supply, cpl Guide spindle Fixing bracket for power supply Sechskantmutter DN EN M Hexagon bolt DN EN M10x Shift lever Spindle unit PPREMO 25kN Spring washer Threaded bush PREMO Cylinder screw DN EN SO M4x Securing flange Protective conductor terminal Cylinder screw DN EN SO M10x sales@ultravalve.co.uk

17 Technical data ARMATUREN AR-PREMO -Plus 2G kn Technical data Type AR-PREMO-Plus 2G 12 kn AR-PREMO-Plus 2G 15 kn AR-PREMO-Plus 2G 25 kn Thrust force kn 12,0 kn 15,0 kn 25,0 kn Operating speed mm/s 0,20 0,31 / 0,38 / 0,79 adjustable Travel distance max. mm 65 mm* Duty classification acc. to EN S3-80% ED / max c/h (at +70 C) Supply voltage V 24 VAC/DC Motor type BLOC (Brushless DC motor) Power consumption VA max. 65 (depends on the operating speed) max. 130 Torque switch 2 pcs. included internally Enclosure EN P 65 Max. storage temperature c -40 c c Max. permissible ambient -20 c c c temperature (For outdoor use and sub-zero temperatures, a heating is recommended!) Hand operating device Operation Yes (engageable) optional: 3-point: 12 V AC/DC to 250 V AC/DC 0 to 10 V DC load resistance 500 kohm resolution 12 Bit 4 to 20 ma DC load resistance 125 Ohm resolution 12 Bit Supply voltage: 2,5 mm 2 Max. cable cross section 3-step input: 2,5 mm 2 Mounting position Characteristics at control signal failure nput signals: 2,5 mm 2 Any, except: motor not hanging downwards adjustable with slide switch: OPEN, STOP, CLOSE Gear lubricant Klubersynth G Weight kg 9,5 kg 11 kg Aditional voltage refer to page 6 Accessories refer to page 6-8 *other strokes on request sales@ultravalve.co.uk

18 ARMATUREN AR-PREMO -Plus 2G Accessories Additional voltage Switching power supply for AR-PREMO-Plus 2G 2,2-15kN 25kN Voltage V-Hz V AC Hz V DC Power consumption VA max. 65 max. 130 Transformer for AR-PREMO-Plus 2G 2,2-15kN 25kN Voltage V-Hz V 50/60 Hz Power consumption VA max. 65 max VAC 3~400V Accessories Type AR-PREMO-Plus 2G 2,2 25 kn 2 intermediate positions, - to set by switch, Binary feedback Type Relay board - changeover contacts 250 V, 3 A ohm resistive load, 6 A inductive load 1 failure signal and 1 warning signal, - changeover contacts 30 V AC/DC, 2A analogue output for position feedback, 4-20 ma switchable to 0-1 0V Electronic position indicator Type Analog output card invertable galvanic isolation between the mains voltage and feedback signal Heating Heating resistor active 230 V AC, 115 V AC, 24 V AC/DC; 15 W automatic switching circuit Potentiometer Conductive 1000, 2000, 5000 Ohm, 1 Watt (at +70 D C) (max. 2 only) Wiper current max. 0,01 ma recommended 0,002 ma Wire 100, 200 Ohm, 0,5 Watt (at +70 D C) (max. 2 only) Wiper current max. 35 ma recommended 0,02 ma LED - Status ndicator (Process-) controller Bus systems 2,2 / 5kN From the outside on the visible display of the drive status; green = OK.; red = error; yellow = warning; blue = maintenance; 12/15/ 25kN ntermediate upgrade modules available starting with SW version 3.3.X Type Processcontroller dtron 316 Profibus DP (via dtron 316 as Gateway) Mounted in the actuator 4-20mA output for operation of PREMO-Plus 2G for resistance thermometers and thermocouples (provided by the customer) or standard signals, Pre-configured for temperature control: control range from -200 D C up to +850 D C (resistance thermometer) Control command: - 3-point: OPEN, Stop, Close - Nominal position value 0-100% Feedback signals Modbus RTU -Actual position value (requires electronic position indicator in the PRE MO-Plus 2G (via dtron 316 as Gateway) - 2 binary signals (requires a relay card in the PREMO-Plus 2G) optional: Limit switch (2x), failure signal, warning signal sales@ultravalve.co.uk

19 ARMATUREN AR-PREMO -Plus 2G Accessories Relay board Relay (zero-potential changeover contacts) switching capacity lus 1 (open) 1 (close) 3 warning 4 failure 250V, 30 VAC/DC, 3 A ohm resistive load, 2A 6 A inductive load max. cable cross section 2,5 mm' 1,5 mm' Contact material Gold Storage temperature Operating temperature Features: Setting of the switching points over push buttons zero-potential changeover contacts 2 intermediate positions or end positions 1 Collective failure message: 1 Collective warning message: -40 C "' +85 C -40 C "' +85 C (Note temperature range for the entire actuator!) - Control signal failure - Position can not be reached (Motor-/gear failure) - Blocking (actual) - Actuator is not intialised - Voltage failure - Hand operating device - Blockage (identified) - Position can not be reached - Maintenance - nternal temperature exceeded - ED management active - Silent running - too small travel during initialization Analog output card 0-10VDC Output control signal Y u Measuring resistance (load resistance) max. 2 kohm load resistance Signal resolution 12 Bit 4-20mA DC, active Output control signal Y Measuring resistance (load resistance) max. 500 Ohm Signal resolution 12 Bil Features: for position transmitter Potentiometer Type MP21 (Standard) RP19 Resistance values 1000, 2000, 5000 Ohm 100, 200 Ohm Element technology Conductive plastic Wire Resistance tolerance ±15% ±3% ndependent linearity tolerance ±1 % ±0,5% Loading capacity at +70 C (0 Wat 105 C) 1 Watt 0,5 Watt Max. / recommended contact current 0,01 ma 0,002 ma 35 ma / 0,02 ma Max. cable cross section 2,5 mm' Durability 10 Mio. turns 1 Mio. turns sales@ultravalve.co.uk

20 ARMATUREN ntegrated (Process-) controller dtron 316 Features programmable analogue input 2 auto-tune methods Program function with 8 program sections or slope-function 2 Timer functions 4 limit-comparators nterlock for keyboard and level 4 programmable setpoints, two parameter sets 4 digit resolution (max. 2 decimal places) Controller characteristic P, PD, Pl or PO Actual value input by usual temperature sensors (see in table) 2 relay outputs 230V/3A (shutter) 4-20mA output for operation of PRE MO-Plus 2G 2 combinable binary inputs / binary outputs AR-PREMO -Plus 2G ntegrated (Process-) controller dtron 316 Block structure A n al og u e in p ut = = = = = = = = ===== L or Binar y ==========' input B _ in _ a _ r y_ i _ np _ u _ t --- or 2relay 1 1 Logical output 1 Logical output Analogue output 4-20mA nput thermocouples Fe-CuNi,,L" Fe-CuNi,,J" DN EN Cu-CuNi,,U" Cu-CuNi,,T" DN EN NiCr-Ni,,K" DN EN NiCr-CuNi,,E" DN EN NiCrSi-NiSi,,N" DN EN Pt10Rh-Pt,,S" DN EN Pt13Rh-Pt,,R" DN EN Pt30Rh-Pt6Rh,,B" DN EN W5Re-W26Re,,C" W3Re-W25Re,,D" W3Re-W26Re Measuring range C C C C C C C C C C C C C nput resistance thermometer Type of connection Measuring range Pt 100 (standard) 2-wire / 3-wire / 4-wire C Pt wire / 3-wire / 4-wire C Pt wire / 3-wire / 4-wire C KTY wire C Sensor output resistance: max. 30Ohm each circuit at 3- and 4-wire connection Measurement current: approx. 250µA Circuit adjustment: - at 3- and 4-wire connection not necessary. - at 2-wire connection a circuit acjustment can be done with sofware bv correctina the actual value. nput standardized active current or voltage signals Measuring range Voltage 0 (2)... 10V, input resistance Re> 100kOhm Current 0 (4)... 20mA, voltage drops 1,5 V sales@ultravalve.co.uk

21 AR-PREMO -Plus 2G ARMATUREN Details Direct operator panel Setting with switches, without a PC or tools Failure signals acc. to Namur 107 Switchable economy function for extended lifetime Local operation Anti-block function Control signal switch 0-10 V / 4-20 ma Control signal invertible Adjustable failsafe characteristic at control signal failure Adjustable motor speed to adapt the operating speed CD W &... J e 12 y ', '0 AJtO Additional features: Automatic valve travel adaption Priority control for 3-point signals - e.g. for anti-freeze function Economy function for extended lifetime - Prevents cycling of the valve, reducing wear - Control optimisation for 3-point operation Tight-closing function Detection and suppression of interferences on the signal line Automatic fault detection (incl. emergency functionality) Temperature duty cycle management and performance adjustment Avoid condensation by integrated humidity sensor with heating elements Contactless position determination Failure and warning signal via relay contact RPM Man sales@ultravalve.co.uk

22

23

24 AR-PREMO -Plus 2G ARMATUREN Dimensions X X A x B A x B :r: :r: 2,2-5kN Nominal travel > 30 mm - 50 mm 2,2 5kN Nominal travel max. 30 mm A B SW X H h (Nominal travel) 2,2-5kN max max kN max max. 50 / X A X B A B C 0D1 X H h (Nominal travel) L(Column) 12-25kN Nominal travel max. 80 mm sales@ultravalve.co.uk 652 max