2WT Tu-Wire 120V 32W T8 Ballast

Transcription

1 3804 South Street , TX Nacogdoches Phone: Fax: Catalog Number Manufacturer Description Weight per unit Product Category 2WT Tu-Wire 120V 32W T8 Features Factor 0.85 Dimming Type 100 TO 5 PERCENT Current 0.7 AMPERE Voltage 120 V Lamp Style LINEAR, U Lamp Type T8 Lamp Wattage 32 W Maximum THD 20 PERCENT Minimum Starting Temperature 50 DEG F Number of Lamps 2 Power Factor 0.95 Starting Type PROGRAMMED RAPID Dimensions and Weight Size 2WT Fluorescent Dimming, High Frequency; 100 to 5 Percent Dimming; Programmed Rapid Start; T8 Lamp; Linear, U Lamp; 2 Lamp(S); 32 W Lamp Wattage; Voltage 120 V; Current 0.7 Ampere; 60 HZ; 0.95 Power Factor; 0.85 Factor N/A Dimming Linear Fluorescent Bal 18 INCH L X 1.18 INCH W X 1 INCH H Descriptions Commodity Description Fluorescent s & Accy - Electronic Long Description FLUORESCENT DIMMING BALLAST, HIGH FREQUENCY; 100 TO 5 PERCENT DIMMING; PROGRAMMED RAPID START; T8 LAMP; LINEAR, U LAMP; 2 LAMP(S); 32 W LAMP WATTAGE; INPUT VOLTAGE 120 V; INPUT CURRENT 0.7 AMPERE; 60 HZ; 0.95 POWER FACTOR; 0.85 BALLAST FACTOR Product Type Dimming Linear Fluorescent Manufacturer Information Brand Manufacturers Part Number 2W-T Taxonomies, Classifications, and Categories Type HIGH FREQUENCY

2 3804 South Street , TX Nacogdoches Phone: Fax: Packaging Carton 1 Weight Per each 0 Uses, Certifications, and Standards Approval UL 935, CSA C22.2 Frequency Rating 60 HZ

3 s and drivers Eco LED driver Highest performance dimming to 1% Eco digital link controlled CE MODELS ONLY Shown above: Eco LED driver, P-case Model number is determined by load and control type. See pg. 591 for additional information. Providing smooth and continuous 1% dimming, the high-performance Eco LED driver works with virtually any LED fixture. It communicates via the Eco digital link, a revolutionary technology that allows the driver to react to its environment. It also allows for individual control of the drivers, which eliminates the need to rewire, and provides a scalable solution for almost any application. The Eco LED driver is available for fixtures requiring either constant current or constant voltage. Operating Voltage V 50/60 Hz Control options Eco digital link Lamp types and wattages LED light engines, up to 25 W Available case types P-case LED operating specifications Constant Current 0.20 A-1.05 A (in 0.01 A increments) 5 W-25 W Pulse width modulation (PWM) or constant current reduction (CCR) dimming Constant Voltage 8 V-38 V (in 0.50 V increments) 5 W-25 W PWM dimming Download specification submittal 566 Volume 2 P/N

4 s and drivers Eco LED driver Key standards CE and ENEC Mark RoHS 2006 Compliant IEC Rated Features Continuous, flicker-free dimming from 100% to 1% Efficiency of 80% at 25 W Protected from miswires of input power to Eco control inputs CCR and PWM dimming available for constant current light engines; constant voltage light engines operate with pulse width modulation (PWM) dimming only A rated lifetime of 50,000 hours Independent control gear with integral strain relief LEDs turn on to any dimmed level without flashing to full brightness Sensors cannot connect directly to the driver Specifications Power factor greater than 0.95 at 25 W Low harmonic distortion Inrush current less than 2 A Environment Sound rating: inaudible in a 27 db ambient environment Mounting Independent control gear, driver requires no particular mounting means Wiring Eco LED drivers require four wires plus Ground (E1, E2, Live and Neutral); one 0.75 mm 2 to 1.50 mm 2 solid copper Class 1 or Class 2 wire per terminal The 1.50 mm 2 control wire must not exceed 310 m, and the 0.75 mm 2 must not exceed 50 m; maximum driver-to-led light engine wire length is 3 m for any output type Volume 2 P/N

5 s and drivers Fluorescent ballast model numbers T8 and U-bent (continued) Tu-Wire (5% dimming) 120 V dimming ballasts Dimming to 5% Compatible with Tu-Wire fluorescent controls Energy saving Lamp Watts (Length) 25 W (36 in) 32 W (48 in) Lamps per Factor Relative Model Number Case Type* Voltage (VAC) Current (A) Power (W) Factor (BF) Lumens (lm) (lm/w) (BEF) (RSE) 1 2W-T C , W-T C , W-T C , W-T C , Refer to the online ballast selection tool for additional information, *For case type information see pgs Actual number may vary with lamp model. Please consult the lamp manufacturer for lamp-specific data. 572 Volume 2 P/N