Output Voltage Range (V) PF-P250CC-C105-S(U)-ND 90 ~ ,0 UL CE ENEC CB

Transcription

1 Description 305Vac -Around Protection: OVP/OTP/SHORT 0-10V/PWM/Resistor/Time 4 in 1 Dimmable Programmable Output Current with Constant Wattage Design ning Protection 6kV for 4 Thermal Optimized Aluminum Case with Potting Application Outdoor Applications: Street Light and High Bay Model Selection Model Number Input Voltage Range (V) Output Power (W) Output Voltage Range (V) Output Current (ma) Typical Eff. (%) Certification PF-P250CC-C070-S(U)-ND 90 ~ ,0 UL CE ENEC CB PF-P250CC-C070-S(U)-DM 90 ~ ,0 UL CE ENEC CB PF-P250CC-C070-S(U)-TS 90 ~ ,0 UL CE ENEC CB PF-P250CC-C105-S(U)-ND 90 ~ ,0 UL CE ENEC CB PF-P250CC-C105-S(U)-DM 90 ~ ,0 UL CE ENEC CB PF-P250CC-C105-S(U)-TS 90 ~ ,0 UL CE ENEC CB PF-P250CC-C140-S(U)-ND 90 ~ ,0 UL CE ENEC CB PF-P250CC-C140-S(U)-DM 90 ~ ,0 UL CE ENEC CB PF-P250CC-C140-S(U)-TS 90 ~ ,0 UL CE ENEC CB PF-P250CC-C210-S(U)-ND 90 ~ ,0 UL CE ENEC CB PF-P250CC-C210-S(U)-DM 90 ~ ,0 UL CE ENEC CB PF-P250CC-C210-S(U)-TS 90 ~ ,0 UL CE ENEC CB PF-P250CC-C280-S(U)-ND 90 ~ ,0 UL CE ENEC CB PF-P250CC-C280-S(U)-DM 90 ~ ,0 UL CE ENEC CB PF-P250CC-C280-S(U)-TS 90 ~ ,0 UL CE ENEC CB PF-P250CC-C420-S(U)-ND 90 ~ ,0 UL CE ENEC CB PF-P250CC-C420-S(U)-DM 90 ~ ,0 UL CE ENEC CB PF-P250CC-C420-S(U)-TS 90 ~ ,0 UL CE ENEC CB Note: ND means non-dimming model; DM means 0-10V dimmable; TS means timer dimming; CS means output current programmable 1

2 Specifications Input Output Protection Models Input Voltage Input Frequency Power Factor THD Input Current Inrush Current Leakage Current Current Accuracy Ripple Current [2] Setup Time Output Overshoot Output Over Voltage Input Under Voltage Over Temperature Short Circuit Specifications Vac 47 63Hz refer to PF vs. Load curve. refer to THD vs. Load curve. 1.8 & Full-Load; & Full-Load 25 Cold Start 60Hz, UL Hz, IEC ±5%Io Ip-p:5%Io 1.2s max 10%Io max & LED Load 120% Vomax, typ. c Lower the output current when Tc 110±5 ; Auto Recovery When Tc 70±5 Auto recovery. The output recovers when short is removed. Environmental Condition Others Operating Temperature Storage Temperature MTBF Lifetime Dimensions %RH 100%RH (See Derating Curve for more details [3] %RH 100%RH temperature(mil-hdbk-217f) temperature Inch (LxWxH) 9.49*2.68*1.53 Millimeter (LxWxH) 241*68*38.8 ambient ambient Net Weight 800g Notes: [1] Measured at full load and 220Vac in the thermal balanced condition. [2] The result differs according to different LED load characteristic. [3] Please confirm working conditions according to the derating curve of output power vs. input voltage and temperature. Beyond the safety work condition will not be recommended. [4] All the test results are measured in the 25DegC room temperature, if the low and high temperature performance test results are required; please contact with the sales and technical support team, the contact is listed in the last page. 2

3 Safety & EMC Compliance Safety Category Standard UL8750 Light Emitting Diode(LED) Equipment for Use in Lighting Products UL1012 Power Unit Other Than Class 2 IEC Lamp Controlgear Part 1: General and Safety Requirements IEC Lamp Controlgear Part 2-13: Particular Requirement for d.c. or a.c. Supplied Electronic Controlgear foe LED Modules EMI Standards Notes IEC Conducted emission test & Radiated emission test IEC IEC Voltage fluctuations & flicker FCC Part 15 Class B EMS Standards Notes IEC Electrostatic discharge (ESD) IEC Radio frequency electromagnetic field susceptibility test (RS) IEC Electrical fast transient (EFT) IEC Surge immunity test L-N:4kV; LN-PE:6kV IEC Conducted radio frequency disturbances test (CS) IEC Power frequency magnetic field test IEC Voltage dips IEC Electromagnetic immunity requirements applies to lighting equipment Derating Curve 3

4 Lifetime vs. Case Temperature Efficiency vs. Load Power Factor Characteristics 4

5 THD vs. Load Dimming Section Parameter Min. Typ. Max. Vcc - 12 V - Rin kohm - Absolute maximum voltage range on the 0~10V input pin -20 V - 20 V Dimming range 10% - 100% Dim off threshold 0.5V Dim off hysteresis 0.2V 0-10V Dimming Range 10% 100% - (Vdim=0~1V) (Vdim=8~10V) PWM Dimming Range 10% 100% - (Duty=0-10%) (Duty=80-100%) PWM High 3V - 10V PWM Low 0V - 0.6V PWM Frequency 300Hz - 2kHz External PWM Controller Current Sinking Capability 300uA - - 5

6 Mechanical Outline (Unit: mm) PF-P240CC-Cxxx-S-DM PF-P240CC-Cxxx-S-ND/TS 6

7 PF-P240CC-Cxxx-U-DM PF-P240CC-Cxxx-U-ND/TS Note: Please make sure the output cable does not connect to dimming cable or the cables of other drivers until 20 seconds after being tested because of the remained voltage in the output capacitor. 7