EV series of AC voltage amplifiers
|
|
|
- Shana Horton
- 5 years ago
- Views:
Transcription
1 EV series of AC voltage amplifiers Wide frequency range AC power amplifier system The applications: - Component testing - Measuring equipment testing - Ignition pulse testing (lighting equipment) High slew rate Wide frequency range Very low internal resistance Frequencies from 1.5kHz to 300kHz can be generated in laboratory and test systems Testing of wound components, capacitors and filters Testing of lighting equipment like lamps, bulbs etc. Simulation of undervoltage and overvoltage as well as frequency variations Testing of electrical and electronic devices of all kinds (e.g. testing of high frequency measuring instruments) Testing the ignition pulse for lamp starting devices Testing according to EN / VDE 0712 page 1 of 5 pages
2 TECHNICAL DATA TYPE SPECIFIC Type EV 300 EV 600 EV 750 EV 1200 Power: 1) Continuous power: 300VA 600VA 750VA 1200VA cos phi: 0.7 inductive capacitive at nominal power Nominal Voltage: 0 150Vrms or 0 300Vrms Digital instrument: 3½ digit Voltage range: 400V Current range (optional): 2A 5A 5A 10A Max. (of measured value ±2 digit) Accuracy Voltage: 15kHz 50kHz 2% 50kHz 100kHz 3% 100kHz 200kHz 6% 200kHz 300kHz 8% Accuracy Current: 0,8% / 0,4% Supply: Power Supply: (±10%, 50Hz 60Hz) 230V 230V 230V/400V Protection: 16A 16A 3x16A Contactor type: Safety plug Safety plug CEE Housing: 19 -plug-in unit, colour light grey (RAL 7035) Dimensions (mm): Power supply (5U) 265x540x550 Power supply (7U) 350x540x550 Power supply (7U) 350x540x550 Amplifier (7U) Power supply (5U) 615x540x550 Weight (approx.): 35kg 45kg 45kg Amplifier 40kg Power supply 60kg Remarks: 1) Nominal power at 230V supply voltage 2) With additional voltage transformer page 2 of 5 pages
3 TECHNICAL DATA - GENERAL Type Protection circuits: Control: Voltage adjustment: Load regulation: (0 nominal load) Gain stability: Frequency range: Harmonic distortion: (at nominal voltage) Waveform: Amplitude resolution: Frequency range: Frequency resolution: All EV types depending on oscillator used Type CuG: 45Hz 4.5kHz < 5% 4.5kHz 100kHz < 6% Type FS: 1.5kHz 50kHz < 6% 50kHz 100kHz < 8% Type H: 15kHz 50kHz < 4% 50kHz 200kHz < 10% Type I: 45kHz 100kHz < 7% 100kHz 200kHz < 18% 200kHz 300kHz < 25% 10min: <0.2% at constant load and temperature 8h: <0.5% at constant load and temperature Type CuG: 45Hz 4.5kHz (-1dB) 4.5kHz 100kHz (-3dB) Type FS: 1.5kHz 100kHz (-3dB) Type H: 15kHz 200kHz (-3dB) Type I: 45kHz 100kHz (-3dB) 100kHz 300kHz (-3dB) Type CuG: 45Hz 4.5kHz < 1% 4.5kHz 100kHz < 2% Type FS: 1.5kHz 50kHz < 3% 50kHz 100kHz < 5% Type H: 15kHz 50kHz < 5% 50kHz 200kHz < 6% 2) 4.5kHz 100kHz < 5% Type I: 45kHz 100kHz < 6% 100kHz 200kHz < 8% 200kHz 300kHz < 10% overload / short circuit / overtemperature Internal control source DDS 2-EV (optional) sine 100mV Type CuG: 45Hz 4.5kHz (-1dB) 4.5kHz 100kHz (-3dB) Type FS: 1.5kHz 100kHz (-3dB) Type H: 15kHz 200kHz (-3dB) Type I: 45kHz 100kHz (-3dB) 100kHz 300kHz (-3dB) 0.1Hz / 1Hz / 10Hz (depending on frequency range) Input: Input voltage: (for max. output voltage) Interface (optional): Ambient temperature: Input impedance: ±5Vp approx. 2k IEEE488 / RS232 0 C up to +40 C page 3 of 5 pages
4 OPTIONS Option 01: Option 04: Option 06: Option 07: Option 11-a: Option 11-b: Option 13: IEEE488 Interface Digital instrument current measurement Output voltage monitor Output current monitor Special voltage range up to 0 600Vrms/ replaces standard range Special voltage range up to 0 999Vrms/ replaces standard range Special frequency range Option 18: Special line voltage (110V 300V) Option : Option : Option : Option : Option : Option : Option 26-g: Option D03: (only available in combination with variable oscillator type DDS 2 EV) Option : (Only available in combination with Variable Oscillator, type DDS 2) e.g Vrms /0 300Vrms e.g Vrms /0 400Vrms e.g Vrms /0 500Vrms e.g Vrms /0 600Vrms Voltage range switching (includes option 11-b) e.g Vrms /0 700Vrms Voltage range switching (includes option 11-b) e.g Vrms /0 800Vrms Remote control connection (isolated) level: 5V to 24V(active low)/ control lines for: - Output (ON/OFF) - voltage and frequency ranges - Source selection (internal / external) - Control of fixed frequencies: 25kHz/50kHz (only available in combination with variable oscillator type DDS 2 EV) - Manual voltage adjustment back side connection plug for an external ten-turn potentiometer DC-control input 0 10V control of amplitude and frequency Voltage transformer, type UT /G with Ignition Pulsing Uinput:0 250Vrms /0 500Vrms / Uoutput: / 400 / 500 / 600 / 800 / 1000Vrms f:15khz kHz (-3dB) Ignition Pulsing: Uoutput:1000Vrms /1500Vrms /2000Vrms / f:15khz kHz (-3dB) page 4 of 5 pages
5 Example: Schematic diagram EV750 amplifier including Option ignition pulse Performance characteristic EV amplifier Spitzenberger & Spies 2018 all data are subject to change page 5 of 5 pages
LVA series of 4-Quadrant amplifiers
LVA series of 4-Quadrant amplifiers AUTOMOTIVE SUPPLY SIMULATION AT IT S BEST LVA 1 Front panel Extremely low harmonic distortion - even under very non-linear load conditions Very fast slew rate > 2V/µs
LVA 4-Quadrant Amplifier 1000
LVA 4-Quadrant Amplifier 1 AUTOMOTIVE SUPPLY SIMULATION AT IT S BEST The relating standards: ISO 7637-2/-3 ISO 167-2 ISO 21848 LV 124 VDA 32 (LV 148) SAE J 1113-11 BMW GS 92 BMW GS 924-2-2 BMW GS 926 Ford
LVA 4-Quadrant Amplifier 5000
LVA 4-Quadrant Amplifier 5 AUTOMOTIVE SUPPLY SIMULATION AT IT S BEST Example: LVA 1 Front panel Extremely low harmonic distortion - even under very non-linear load conditions Very fast slew rate > 2V/µs
APS series of 4-quadrant amplifiers
APS series of 4-quadrant amplifiers 4-QUADRANT VOLTAGE / CURRENT AMPLIFIER Fig. 1: 4-quadrant amplifier APS 1000 NEW: Constant current mode The adjustable and desired output current is automatically regulated
PAS series of 4-Quadrant Amplifiers
PAS series of 4Quadrant Amplifiers THE REAL 4QUADRANT AMPLIFIER The relating standards: IEC/EN 6132 IEC/EN 6133 IEC/EN 61311 IEC/EN 61312 IEC/EN 614611 IEC/EN 6122 IEC/EN 6144 IEC/EN 6145 IEC/EN 6148 IEC/EN
4Q POWER AMPLIFIERS AC AND DC 3000VA 3x3000VA
PERFORMANCES High accuracy High stability Fast transients High inrush current facilities Wide bandwidth 25 khz at -3dB Internal waveform DC and up to 10 khz Very low distortion Quadrant change without
NDR6110 Single Channel Dynamic Driver for Piezoelectric Actuators
NDR61 Driver Series NDR6110 Single Channel Dynamic Driver for Piezoelectric Actuators Features Bipolar and unipolar output load Galvanic separation of the output Adjustable input range and phase inversion
1. General Instructions 2 2. Safety 2 3. Lamp Starting Test Instrument LSTI 5 3
1. General Instructions 2 2. Safety 2 3. Lamp Starting Test Instrument LSTI 5 3 3.1. Components and Connections of the Front Panel (Fig. 1) 5 3.2. Connection of the Rear Panel (Fig. 2) 7 3.3. Operation
AC/DC Power Sources ACS Series
AC/DC Power Sources ACS Series 3-phase systems 1200 VA - 13800 VA 1 3-Phase AC/DC Power Sources ACS Series 1200 VA - 13800 VA 3-phase AC power source ACS 2400-PS Special features Overview AC- and DC operation
MODEL 9041 EXTENDED SPECIFICATIONS. 25ppm TRANSPORTABLE CALIBRATOR
MODEL 9041 EXTENDED SPECIFICATIONS 25ppm TRANSPORTABLE CALIBRATOR 9041 EXTENDED SPECIFICATIONS General Specifications TRANSMILLE LTD Warm Up Time Double the time since last used up to 20 minutes maximum
TRANSMILLE 3010A PRECISION MULTIPRODUCT CALIBRATOR EXTENDED SPECIFICATIONS
TRANSMILLE 3010A PRECISION MULTIPRODUCT CALIBRATOR EXTENDED SPECIFICATIONS www. transmille.com 3010A EXTENDED SPECIFICATIONS General Specifications TRANSMILLE LTD Warm Up Time Double the time since last
AC/DC Power Sources ACS Series
AC/DC Power Sources ACS Series 1-phase systems 400 VA - 6000 VA 1 1-Phase AC/DC Power Sources ACS Series 400 VA - 6000 VA 1-phase AC/DC power source ACS 800-PS Special Features Overview AC and DC operation
Green LED (right of 'D' type connector)
3050A EXTENDED SPECIFICATIONS General Specifications TRANSMILLE LTD Warm Up Time Double the time since last used up to 20 minutes maximum Standard Interfaces USB Optional Interfaces GPIB (IEEE-488) : RS232
DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY Manufacturer's Name: Transmille Ltd. Manufacturer's Address: Unit 4, Select Business Centre Lodge Road Staplehurst TN12 0QW. United Kingdom. Declares, that the product Product
TOE 7704 to TOE 7711 A
Synthesizers/function generators with sweep, trigger, AM and frequency counter Special features 1 mhz to 44 MHz Sweep, trigger, gate Variable symmetry Digital display of frequency, sweep, AC, DC Amplitude
Electronic AC Load ZSAC Series. 400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A. Rev. 3.03
Electronic AC Load Series 400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A Rev. 3.03 Electronic AC Loads, Series Interface overview RS-232 USB GPIB LAN System bus Analog / Analog isolated X X Standard
Arbitrary/Function Waveform Generators 4075B Series
Data Sheet Arbitrary/Function Waveform Generators Point-by-Point Signal Integrity The Arbitrary/Function Waveform Generators are versatile high-performance single- and dual-channel arbitrary waveform generators
15. Specifications WF1947/WF
15. Specifications 15.1 Oscillation Mode...15-2 15.2 Waveform...15-2 15.3 Frequency, Phase...15-3 15.4 Output Characteristics...15-3 15.5 Signal Characteristics...15-5 15.6 Modulated Oscillation Mode...15-7
MODEL 9050 EXTENDED SPECIFICATIONS. 50ppm TRANSPORTABLE CALIBRATOR
MODEL 9050 EXTENDED SPECIFICATIONS Ü 50ppm TRANSPORTABLE CALIBRATOR 9050A EXTENDED SPECIFICATIONS General Specifications TRANSMILLE LTD Warm Up Time Double the time since last used up to 20 minutes maximum
High Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
GF 467F FUNCTION GENERATOR. PROTECTED RS232 + (USB OR LAN)* LabVIEW 0,01 Hz to 5 MHz CMos. Specifications. Other specifications
FUNCTION GENERATOR EAN CODE : 3760244880468 5 MHZ+RS232++(USB or LAN)* GF 467F COMPLETE : Reciprocal frequency counter 50 MHz. - Internal linear or logarithmic sweep, and external VCF or FM modulation.
POWER AMPLIFIERS 4 QUADRANTS 3x500 VA to 3x1500 VA - THREE-PHASES
PERFORMANCES High accuracy High stability Fast transients High inrush current facilities Wide bandwidth Very low distortion Quadrant change without transition Very low output impedance Low noise RS232
USER. manual. Falco Systems WMA-100. High Voltage Amplifier DC - 500kHz
USER manual Falco Systems WMA-100 High Voltage Amplifier DC - 500kHz Falco Systems WMA-100, High Voltage Amplifier DC - 500kHz High voltage: 20x amplification up to +175V and -175V output voltage with
Lab 7: DELTA AND SIGMA-DELTA A/D CONVERTERS
ANALOG & TELECOMMUNICATION ELECTRONICS LABORATORY EXERCISE 6 Lab 7: DELTA AND SIGMA-DELTA A/D CONVERTERS Goal The goals of this experiment are: - Verify the operation of a differential ADC; - Find the
Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs
in Specification AXIOM9000 Rev.: 1 Date: 2016-07-01 Oscillator type: Very High Stability Ultra-Low Noise Reference (D)OCXO in 19 rack (1 HU) with up to 3 outputs Features: Very High Frequency Stability
400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A. Electronic Load ZSAC
400 W up to 21,000 W 260 V up to 440 V 3 A up to 100 A Electronic Load Electronic AC Loads, Interface overview RS-232 USB GPIB LAN System bus Analog X Analog isolated X Standard ption / not available 4226
synchronized operation with utility AC source over voltage protection 0 ~ +40 C 20% ~ 90% RH non-condensing -30C ~ +70 C, 10 ~ 95% RH
True Sine Wave Output (THD < 3%) Power ON-OFF remote control Input and output fully isolated Advanced microprocessor Built-in transfer switch and AC circuit Remote override function or ignition lockout
WHALETEQ. ESU Neutral Electrodes Impedance Tester. Model: HFPA150. User Manual
WHALETEQ ESU Neutral Electrodes Impedance Tester Model: HFPA150 User Manual Version2014-10-30 Hardware Version1.3.x 1. Introduction HFPA150 is a unique tester specifically designed for the testing of neutral
High Speed BUFFER AMPLIFIER
High Speed BUFFER AMPLIFIER FEATURES WIDE BANDWIDTH: MHz HIGH SLEW RATE: V/µs HIGH OUTPUT CURRENT: 1mA LOW OFFSET VOLTAGE: 1.mV REPLACES HA-33 IMPROVED PERFORMANCE/PRICE: LH33, LTC11, HS APPLICATIONS OP
1. BP4620 SPECIFICATIONS
1. SPECIFICATIONS 1. SPECIFICATIONS 1-1 1.1 Specification Conditions 1-2 1.2 Output 1-3 1.3 Output Limiters 1-5 1.4 Signal Sources 1-6 1.5 Monitor Output 1-7 1.6 Measurement Functions 1-7 1.7 Sequence
Function Generator MODEL FG-500 Instruction Manual ELENCO
Function Generator MODEL FG-500 Instruction Manual ELENCO Copyright 2012, 2003 Elenco Electronics, Inc. REV-D 753068 SPECIFICATIONS OUTPUT: Waveforms: Sine, triangle, square Impedance: 600Ω ±10% Frequency:
CAR - TEST - SYSTEM 14
CAR - TEST - SYSTEM 14 EMC-Test Equipment for electrical installation of vehicles Acc. to ISO 7637-2, ISO 16750-2 ISO 21848 Rise time variable 1-5µs Pulse Waveforms : #1 1-5/2000µs, 600 V, ISO 1-5/1000µs,
Chapter 6 Specifications
RIGOL This chapter describes the specifications of RF signal generator. Specifications are valid under the following conditions: the instrument in the calibration cycle is stored at least two hours at
Piezo Driver MTAD4002
Piezo Driver MTAD002 Instruction Manual Contents. Overview 2 2. List of contents 2 3. Specifications 2~3. Operation 3~. Signal Generation Software ~3. Precautions 3 Published on th Sept 20 Overview Piezo
2.1 Performance Standards The UPS is designed with the applicable sections of UL, CUL, and ISO The UPS has UL and CUL listing.
1.0 Scope This document describes the specification for Toshiba 1000 Series On-Line Uninterruptible Power System (UPS). The UPS will supply a computer grade AC output sine wave which is unaffected by the
Type Ordering Code Package TDA Q67000-A5168 P-DIP-18-5
Video Modulator for FM-Audio TDA 5666-5 Preliminary Data Bipolar IC Features FM-audio modulator Sync level clamping of video input signal Controlling of peak white value Continuous adjustment of modulation
Model Quality in Test and Measurement Since 1949 OUTSTANDING PERFORMANCE DESCRIPTION APPLICATIONS ADDITIONAL FEATURES
Quality in Test and Measurement Since 1949 DC Source/Calibrators, Tunable Electronic Filters, Wideband Power Amplifiers Precision Phasemeters, Distortion Analyzers Function Generators, RC Oscillators Model
AFG-2100/2000 Series Arbitrary Function Generator. New Product Announcement
AFG-2100/2000 Series Arbitrary Function Generator New Product Announcement The AFG-2100/2000 Series Arbitrary Function Generator The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital
Multi-function Gain-Phase Analyzer (Frequency Response Analyzer) Model 2505
OTHER PRODUCTS.. Multi-function Gain-Phase Analyzer ( Response Analyzer) Model 2505 Standard Configurations Gain phase analyzer response analyzer Phase Angle Voltmeter (PAV) Fast dual channel wide-band
Power Supply Unit (550W)
Contents Power Supply Unit (550W) Chapter 3.1 GENERAL DESCRIPTION...3.1-1 APPLIED VOLTAGE...3.1-2 INPUT CURRENT...3.1-2 DC OUTPUT...3.1-3 VOLTAGE DROPOUT...3.1-4 OUTPUT ISOLATION...3.1-4 OVERLOAD/UNDERLOAD
This DDS function generator is designed for use in such applications as communication equipment and electronic components production.
This DDS function generator is designed for use in such applications as communication equipment and electronic components production. Overview This DDS function generator provides a sampling rate of 100
TDA W Hi-Fi AUDIO POWER AMPLIFIER
32W Hi-Fi AUDIO POWER AMPLIFIER HIGH OUTPUT POWER (50W MUSIC POWER IEC 268.3 RULES) HIGH OPERATING SUPPLY VOLTAGE (50V) SINGLE OR SPLIT SUPPLY OPERATIONS VERY LOW DISTORTION SHORT CIRCUIT PROTECTION (OUT
AFG-2100/2000 Series Arbitrary Function Generator. New Product Announcement
ISO-9001 CERTIFIED MANUFACTURER GOOD WILL INSTRUMENT CO., LTD. NO. 7-1, JHONGSING ROAD, TUCHENG CITY, TAIPEI HSIEN, TAIWANTEL: 886-2-2268 0389 FAX: 886 2 2268 0639 AFG-2100/2000 Series Arbitrary Function
A QE 4-quadrant voltage and current amplifier DC 1 MHz 100 V/µs 1000 W (source) 650 W (sink) DATA SHEET
A1110-16-QE 4-quadrant voltage and current amplifier DC 1 MHz 100 V/µs 1000 W (source) 650 W (sink) DATA SHEET The A1110-16-QE is a linear, extreme broadband precision power amplifier. It is ideally suited
UNIVERSITY OF PENNSYLVANIA EE 206
UNIVERSITY OF PENNSYLVANIA EE 206 TRANSISTOR BIASING CIRCUITS Introduction: One of the most critical considerations in the design of transistor amplifier stages is the ability of the circuit to maintain
Current-mode PWM controller
DESCRIPTION The is available in an 8-Pin mini-dip the necessary features to implement off-line, fixed-frequency current-mode control schemes with a minimal external parts count. This technique results
Applications Avionics Testing Power Line Simulation Production Test - Power Supplies - UPS - Telecom. SMARTWAVE Programmable AC/DC Power Source
Applications Avionics Testing Power Line Simulation Production Test - Power Supplies - UPS - Telecom SMARTWAVE Programmable AC/DC Power Source PRODUCT OVERVIEW of cycles for each segment, the user can
10/2 Product overview. 10/3 4AC3 0, 4AC3 1 bell transformers. 10/5 4AC AC3 6 transformers for permanent loads. 10/8 4AC2 4 power supply units
BETA Switching Transformers, Bells and Socket Outlets /2 Product overview /3 4AC3 0, 4AC3 1 bell transformers /5 4AC3 4... 4AC3 transformers for permanent loads /8 4AC2 4 power supply units / 7LQ2 2 bells
FDI Hz to 20 khz Resistor Programmable. 14 Pin DIP Quadrature Oscillator. Description
Description The Model FDI443 Precision has two outputs that are 90 out of phase with each other. The output frequency of the FDI443 is programmable using two resistors or two resistors and two capacitors.
Operational Amplifiers
Questions Easy Operational Amplifiers 1. Which of the following statements are true? a. An op-amp has two inputs and three outputs b. An op-amp has one input and two outputs c. An op-amp has two inputs
AF91 Adjustable Frequency Drives Series B
Effective: January, 00 Page New Information AF9 Adjustable Model AF9 Description Model AF9 Adjustable Frequency AC Drives are designed to provide adjustable speed control of -phase motors. These microprocessor-based
Tabor Electronics Signal Amplifiers. Quick Start Guide
Tabor Electronics Signal Amplifiers Quick Start Guide Tabor Signal Amplifiers- Quick Start Guide - FAQ No. 0309757 Introduction Amplification is an increase in size of a signal by some factor which is
Advantages. Applications
3 s KH 250 General Data Rated input voltage 2 Vac Rated output voltage 2 Vac Rated power 250 VA Ambient temperature +40 C Degree of protection IP 40 Advantages Compensation for mains voltage fluctuations
Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Title: 5502E Getting Started Supplement Issue: 3 Part Number: 4155211 Issue Date: 9/18 Print Date: November 2012 Page Count: 12 Revision/Date: This supplement contains information necessary to ensure
4 K to 512 K words (2 n, n = 12 to 19) or 2 to 10,000 control points (linear interpolation between control points)
The values of items marked with *1 are guaranteed values. All other values are either nominal values or typical (typ.) values, and are not guaranteed. Conditions unless otherwise mentioned are as follows:
RS232 AC-DC VOLTAGE POWER AMPLIFIERS PCU-10K / 15K / 20K / 24K-AB/4G/HP PERFORMANCES APPLICATIONS DESCRIPTION COMMERCIAL REFERENCES
PERFORMANCES High accuracy High stability Fast transients High inrush current facilities Wide bandwidth Very low distortion Quadrant change without transition Very low output impedance RS232 APPLICATIONS
Power IT LV Active Filters PQFI PQFM PQFK. The ABB comprehensive solution for active filtering of harmonics
Power IT LV Active Filters PQFI PQFM PQFK The ABB comprehensive solution for active filtering of harmonics Harmonics and Power Quality Power Quality relates to the amplitude, frequency and distortion of
Chino Scientific Instruments Manufacturing
DIGITAL MICRO OHM METER Chino s made DIGITAL MICRO OHM METER is a compact high reliability 3 ½ digit instrument suitable for measurement of resistivity of copper wires from 70 SWG to 50 SWG resistance
FREQUENCY SYNTHESIZERS, SIGNAL GENERATORS
SYNTHESIZED SIGNAL GENERATOR MG3641A/MG3642A 12 khz to 1040/2080 MHz NEW New Anritsu synthesizer technology permits frequency to be set with a resolution of 0.01 Hz across the full frequency range. And
Four-quadrant fast response bi-polar power supply
Compact high speed bi-polar power supply DJOP Series NEW Four-quadrant fast response bi-polar power supply DJOP series Output voltage : 0 V to ±60 V Maximum output power : 50W, 60 W Frequency bandwidth
PD32-32 Channel Piezo Driver Manual and Specifications
PD32-32 Channel Piezo Driver Manual and Specifications PiezoDrive Pty. Ltd. www.piezodrive.com Contents 1 Introduction... 3 2 Warnings / Notes... 3 3 Specifications... 4 4 Output Voltage Range... 5 4.1
Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Title: 550A Getting Started Supplement Issue: Part Number: 415509 Issue Date: 9/18 Print Date: November 01 Page Count: 19 Revision/Date: This supplement contains information necessary to ensure
EL-AC Electronic Load
s are power electronics devices that behave as an electrical load. While most electronic loads are dissipative, CINERGIA offers a comprehensive range of, and & full 4Q and full regenerative electronic
FUNCTION GENERATOR OPERATION MANUAL
FUNCTION GENERATOR OPERATION MANUAL INDEX 1. Introduction (3) 2. Specifications (3) 3. Working Theory (7) 4. Structure (8) 5. Operation & Maintenance (9) 6. Accessories (14) 1 This instrument is a highly
USER MANUAL. DC - 5MHz High Voltage Amplifier WMA V to +100V output. DC to -3dB large signal bandwidth. 1300V/µs slew rate typical
DC - 5MHz High Voltage Amplifier WMA-320 www.falco-systems.com USER MANUAL -0V to +0V output DC to 5MHz @ -3dB large signal bandwidth 1300V/µs slew rate typical ±300mA Output current limit Stable with
For non-electrical quantities
Controlgear 3UG3 monitoring relays 3RS17 interface converters N nsb0346h nsb0348h nsb0775h For electrical quantities For non-electrical quantities 3RS17 interface converter Selection and ordering data
Rigol DG1022A Function / Arbitrary Waveform Generator
Rigol DG1022A Function / Arbitrary Waveform Generator The Rigol DG1000 series Dual-Channel Function/Arbitrary Waveform Generator adopts DDS (Direct Digital Synthesis) technology to provide stable, high-precision,
Four-quadrant fast response bi-polar power supply
Compact high speed bi-polar power supply DHOP Series NEW Four-quadrant fast response bi-polar power supply Output voltage : 0 V to ±45 V Maximum output power : 240 W Frequency bandwidth : DC to 100 khz
PM 6669 High-Precision Frequency Counter Specifications
PM 6669 High-Precision Frequency Counter Specifications Product Home Features Specifications Models, Options & Accessories Measuring functions Definitions Input specifications Auxiliary functions TimeBase
AWG-GS bit 2.5GS/s Arbitrary Waveform Generator
KEY FEATURES 2.5 GS/s Real Time Sample Rate 14-bit resolution 2 Channels Long Memory: 64 MS/Channel Direct DAC Out - DC Coupled: 1.6 Vpp Differential / 0.8 Vpp > 1GHz Bandwidth RF Amp Out AC coupled -10
Wide-band Models from DC to 100 MHz
CLAMP SENSOR Wide-band Models from DC to 1 MHz 3273-5 - 3276 CLAMP ON PROBES http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available
FL ballasts Electronic dimming. PCA T8 ECO lp Y II, W ECO T8
T8 PCA T8 ECO lp Y II, 18 58 W ECO T8 Product description Processor-controlled ballast with y II inside Highest possible energy class CELMA EEI = A1 BAT 1 Noise-free precise control via DALI or DSI signal,
MGM 3000X Q67000-A5179 P-DSO-20-1 (SMD) MGM 3000X Q67006-A5179 P-DSO-20-1 Tape & Reel (SMD)
Video Modulator for FM/AM-Audio MGM 3000X Bipolar IC Features FM- and AM-audio modulator Audio carrier output for suppression of harmonics Sync level clamping of video input signal Controlling of peak
Suitable for lighting and motor load, 1 Form A 50A latching relays
Suitable for lighting and motor load, 50A latching relays DJ-H RELAYS (ADJH) 9.0 5 1 0.2 9.0 5 New 1 FEATURES 1. High inrush capability Tungsten load (TV-20 class) Electronic ballast load (NEMA10) Capacitive
MGA Magnetic field system. DC khz
MGA 1030 Magnetic field system DC - 250 khz EN 55103-1 + 2, EN 61000-4-8, Automotive, MIL-STD a.o. Generation and measurement of magnetic fields from DC up to 250 khz Field strengths up to 1000 A/m Additional
Variable-Gain High Speed Current Amplifier
Features Transimpedance (gain) switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper cut-off frequency switchable to 1 MHz, 10 MHz or full bandwidth Switchable AC/DC coupling Adjustable
ELEKTROTEHNI KO PODJETJE Leskoπkova cesta 12, 1000 Ljubljana, SLOVENIA
d.o.o. ELEKTROTEHNI KO PODJETJE Leskoπkova cesta 12, 1000 Ljubljana, SLOVENIA SETTING UP REACTIVE POWER COMPENSATION DEVICES SELECTING A REACTIVE POWER COMPENSATION DEVICE To effectively compensate the
Appendix A: Specifications
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Appendix A: Specifications This section provides a complete description of the video measurement set specifications.
A Simple Notch Type Harmonic Distortion Analyzer
by Kenneth A. Kuhn Nov. 28, 2009, rev. Nov. 29, 2009 Introduction This note describes a simple notch type harmonic distortion analyzer that can be constructed with basic parts. It is intended for use in
EN 50178, IEC
Type: DF51 322 1K5 Article No.: 289107 Sales text """Frequency inverter DF51(1,5 kw; 230V) Ordering information Rated voltage U e V Max. rated operational current I e A 7.1 Rated power for motors at 230
DDS Function Generator Selection Guide
Selection Guide DDS Function Generator Selection Guide TFG3500A series TFG3600E series TFG3500 series TFG3200 series TFG3500E series TFG3200E series Display TFT LCD TFT LCD TFT LCD Blue LCD TFT LCD Blue
Advanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) 2 SPECIFICATIONS Model TOS8700 I TOS8750 Test Applied voltage AC/DC voltage 0-3/0-10 kv I 0-1.5/0-5 kv Output 500 VA
UNIT 2. Q.1) Describe the functioning of standard signal generator. Ans. Electronic Measurements & Instrumentation
UNIT 2 Q.1) Describe the functioning of standard signal generator Ans. STANDARD SIGNAL GENERATOR A standard signal generator produces known and controllable voltages. It is used as power source for the
Model Phase Angle Voltmeter. Features: Description: Typical Applications:
Model 2250 Phase Angle Voltmeter Features: 700Vpk Reference and Signal Inputs Wide Frequency Response Isolated Reference and Signal Inputs Up to 86 db Harmonic Rejection Ratio Measurement Capabilities
DIGITAL LOCK-IN AMPLIFIER LI 5640/LI Advanced Functions Made Possible Only with Digital Systems, with DSP and by NF.
DIGITAL LOCK-IN AMPLIFIER LI 5640/LI 5630 Advanced Functions Made Possible Only with Digital Systems, with DSP and by NF NF Corporation Our Experience and Know-How Made Sure the Amplifier Was Packed with
UDB12x. 2xxS. xs seriers. Signal Generator. Manual. Users
UDB12x 2xxS xs seriers Direct Digital Synthesis (DDS) Signal Generator Users Manual Introduction of the instrument This series direct digital synthesis signal generator use DDS technology and FPGA design
High Current, High Power OPERATIONAL AMPLIFIER
High Current, High Power OPERATIONAL AMPLIFIER FEATURES HIGH OUTPUT CURRENT: A WIDE POWER SUPPLY VOLTAGE: ±V to ±5V USER-SET CURRENT LIMIT SLEW RATE: V/µs FET INPUT: I B = pa max CLASS A/B OUTPUT STAGE
E Series 9.00 (1/2) E series
Clamp-on AC/DC current probes E Series The clamps use Hall effect technology for the measurement of AC and DC currents from several milliamps to over 100 A. The elongated, narrow design of these clamps
Advanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) SL AND B SERIES PRODUCT OVERVIEW Elgar SL and B Series power sources are wide range, solid-state linear amplifiers that
Features 100A400AM20. 4kHz 400MHz Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency
Specifications Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency Features The Model is a solid-state, self -contained, air-cooled, broadband amplifier designed for applications requiring
UNISONIC TECHNOLOGIES CO., LTD M4670 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD M4670 Preliminary CMOS IC FITERLESS HIGH EFFICIENCY 3W SWITCHING AUDIO AMPLIFIER DESCRIPTION The M4670 is a fully integrated single-supply, high-efficiency Class D switching
FREJA 306 Relay Testing System
Relay Testing System A Megger Group Company FREJA 306 Relay testing system FREJA 306 is the latest member of the relay testing equipment from Programma, quick and easy to use, like the FREJA 300. The rugged
Ultra Low-Noise Variable Gain Low-Frequency Voltage Amplifier
Features Variable gain 40 to 100 db, switchable in 20 db steps Bipolar input stage, recommended for low impedance sources smaller than 50 Ω Ultra low input voltage noise: 400 pv/ Hz AC coupled, single
Arbitrary power supplies. 160 W to 5200 W
Arbitrary power supplies 160 W to 5200 W TOE 8815 Arbitrary power supplies for generation of any voltage and current characteristics with an output power from 160 W to 5200 W. With exceptionally versatile
Power Quality Solutions PQSine P-Series of Active Harmonic Filters and Power Optimizers
EPCOS Product Brief 2017 Power Quality Solutions of Active Harmonic Filters and Power Optimizers EPCOS has been offering a comprehensive range of key components for power factor correction (PFC) and power
SENTINEL XR PLUS 5-10kVA
SENTINEL R PLUS 5-10kVA Uninterruptible Power Supply Absolute protection Sentinel R Plus is the ideal solution for powering vital mission critical, sensitive loads such as electro-medical security applications
AC Power Source/Analyzers...
... an integrated AC power solution Agilent AC Power Source/ Analyzers provide a complete AC test solution. As AC sources, they combine the capabilities of a power amplifier and an arbitrary waveform generator.
SWR300 Precision Sine \ Cosine Reference
SWR300 Precision Sine \ Cosine Reference THALER CORPORATION 2015 N. FORBES BOULEVARD TUCSON, AZ. 85745 (520) 882-4000 FEATURES PIN CONFIGURATION SINE AND COSINE OUTPUT PROGRAMMABLE FREQUEY: 10Hz - 100kHz
CONTA-ELECTRONICS. Converter Units
CONTA-ELECTRONICS Whether for manufacturing, electrical machine and plant instrumentation, control engineering, power distribution, building automation, or process engineering it is always important to
Parallel AMX AC Power Systems
Parallel AMX AC Power Systems 8kVA to 30kVA 20-5,000 Hz 1Ø4 0-338VL-N 2Ø4 0-600V L-L 4 0-338V L-N /585V L-L Standard Features: Master/Slave Operation of 2 to 5 AMX AC s provides AC Power Levels to from