OFV-5000 Xtra Laser Vibrometer. Xtra sensitivity and versatility Datasheet. OFV-5000 Xtra Laser Vibrometer

Transcription

1 OFV-5000 Xtra Laser Vibrometer The OFV-5000 Xtra Vibrometer Controller in combination with the new MLV-I-0 Sensor Head is designed to flexibly measure vibrational velocity, displacement and acceleration. The Xtra optical sensitivity gathers high-fidelity data from all surfaces even on dark, biological, rotating or moving sample objects. An alternative exchangeable fiber lens as an addon to the MLV-I-0 head enables a dual purpose use for small objects and facilitates overhead measurements. The compactness of this robust sensor with different lens options leads to a versatile use and an easy integration into test setups. This non-contact approach solves challenging applications like NDT, biomedical, long distance displacement measurements, quasi-static displacement measurement and shaker control. Highlights Non-contact vibration sensor with Xtra sensitivity High-fidelity data from all surfaces even on dark, biological or moving objects From µm-sized to large, distant objects High dynamic with wide bandwidth up to 4 MHz Remote operation keeps laser precisely focused OFV-5000 Xtra Laser Vibrometer Xtra sensitivity and versatility Datasheet

2 Technical data Models Version frequency velocity Best velocity resolution displacement Best displacement resolution Acceleration output Decoders M.5 MHz 5 m/s 0.04 µm s - / Hz O VX-09 R.5 MHz 5 m/s µm s - / Hz O VX-09, VX-08 V 4 MHz 5 m/s 0.04 µm s - / Hz ±88 nm 0. pm/ Hz VX-09, DX-300 MD.5 MHz 5 m/s 0.04 µm s - / Hz ±5 mm 0.75 pm/ Hz O VX-09, DX-900 O: Option; : Not available Best value of the typical resolution of the included decoders RD.5 MHz 5 m/s µm s - / Hz ±5 mm 0.75 pm/ Hz O VX-09, VX-08, DX-900 VD 4 MHz 5 m/s 0.04 µm s - / Hz ±5 mm 0. pm/ Hz VX-09, DX-900, DX-300 Metrological specifications Analog signal outputs BNC, ±0 V : Velocity signal Displacement signal AUX output 3 Digital signal output 4 velocity 4 S/PDIF, 4 bit, 48/96 ksa/s (available on request, only for VX-08 decoder) DC to 4 MHz ±5 m/s Depends on decoder configuration. 3 Displacement or acceleration signal, depends on decoder configuration (see table "Models"). 4 Notice: frequency, max. velocity and measurement depend on decoder configuration (see below). Filters Tracking filter Signal level PC interface High pass filter: 00 Hz, off Low pass filter: 5 khz, 0 khz, 00 khz, off 3 settings: slow, fast, off Bargraph on touchscreen and on sensor head Output as DC voltage signal (BNC, V) RS-3, remote control of the instrument settings Velocity decoders Decoder Description No. of s Typical resolution 5, 6 VX-08 Digital high-resolution velocity decoder velocity µm s - / Hz.5 m/s 0 Hz - 5 khz VX-09 Digital velocity decoder µm s - / Hz 5 m/s 0 Hz -.5 MHz Displacement decoders Decoder Description No. of s Resolution 5 displacement DX-300 DX-900 Analog displacement decoder for ultrasonic applications Broadband digital displacement decoder 0. pm/ Hz ±88 nm 30 khz - 4 MHz pm/ Hz ±5 mm 0 Hz -.5 MHz 5 Noise-limited resolution in the smallest measurement. The noise-limited resolution is defined as the signal amplitude (RMS) at which the signal-to-noise ratio is 0 db with Hz spectral resolution, measured on a mirror. Acceleration decoder Decoder No. of s acceleration AX ,000 m/s 0.5 Hz - 0 khz 6 The attainable resolution is frequencydependent. The typical value refers to the center of the operating frequency.

3 General specifications Interface/display Dimensions OFV-5000 Xtra Controller 7" color touchscreen with interactive menu guidance 9" rack mounting, W x D x H: 450 x 360 x 50 mm (9", 84 HP/3U) without angle brackets MLV-I-0 Sensor Head Xtra W x H x L: 35 x 00 x 383 mm Weight 0 kg 4.55 kg Protection class IP0 IP40 Operating temperature Storage temperature Relative humidity Power supply Power consumption +5 C +40 C (4 F F) -0 C +65 C (4 F F) max. 80%, non-condensing VAC ±0%, 50/60 Hz max. 00 VA Optical specifications: MLV-I-0 Sensor Head Xtra Laser type Laser class Focus Maximum stand-off distance Measurement laser: invisible (IR), wavelength 550 nm, output power <0 mw Targeting laser: visible (green), wavelength nm, effective output power < mw Class, eye-safe, with both lasers in operation Auto focus, remote focus, manual focus Up to 00 m (with MLV-O-LRI long front lens, surface dependent) Working distance and laser spot size Front lenses MLV-O-SRI short MLV-O-LRI long Fiber heads for MLV-O-FMI-0 MLV-O-00 Mini Fiber Head MLV-O-0 Micro Spot Fiber Head Included with MLV- O-FMI-0 Fiber Lens (IR). Optional available for MLV-O-FMI-0 Fiber Lens (IR). Focal length [mm] Min. stand-off distance [mm] ± Exit beam diameter (/e ) [mm] Typical spot size in μm at 5 mm mm mm mm mm mm mm mm mm ,000 mm ,000 mm ,000 mm distance, Each additional meter add [μm] +83 3

4 Options and accessories Tripods VIB-A-T0 Standard Tripod Easy targeting on the object under test VIB-A-T05 Tripod with Geared Pan/Tilt Head For precise pointing of the sensor head. The geared pan/tilt head allows quick coarse adjustment and fine adjustment in 3 axes Optical accessories MLV-O-SRI SR Front Lens (IR) Short Range front lens for measuring at short working distances (highest depth of focus) MLV-O-LRI LR Front Lens (IR) Long Range front lens for measuring at long working distances MLV-O-FMI-0 Fiber Lens (IR) m Flexible measurements with m fiber cable on small objects or where space is restricted. Includes MLV-O-00 Mini Fiber Head and VIB-A-CAS08 Transportation Case MLV-O-00 Mini Fiber Head Small fiber head (0 mm diameter) with a laser spot size down to 8 µm for MLV-O-FMI-0 Fiber Lens (IR) m MLV-O-0 Micro Spot Fiber Head Small fiber head (4 mm diameter) with a laser spot size of 8 µm for MLV-O-FMI-0 Fiber Lens (IR) m 4

5 Positioning stages VIB-A-P35 Precision 4-Axes Stage XY-traverse stage featuring 8 mm travel with +/- 5 tip/tilt function for positioning a single 0 mm outer diameter Mini Fiber Head. OFV-036 Tip/Tilt Precision Stage For positioning a single 0 mm outer diameter Mini Fiber Head. Travel ±5. Transportation cases VIB-A-CAS07 Transportation Case for MLV-I-0 Sensor Head Xtra Robust transportation case for the sensor head (included with sensor head) VIB-A-CAS0 Transportation Case OFV-5xxx Robust transportation case for the OFV-5000 Xtra Controller Please contact Polytec s application and sales engineers who will help to choose the appropriate accessories like VibSoft data acquisition and analysis software. 5

6 Velocity decoders VX-09 digital velocity decoder Measurement Full scale output (peak) Typical resolution 3 acceleration linearity error mm/s/v m/s µm s - / Hz , , , ,00, ,400, ,000, , ,000, , ,000, Measurement s 50...,500 mm/s/v each feature an additional low pass with 50 khz frequency, higher resolution but reduced max. acceleration. The full scale values correspond to the maximum output voltage of 0 V peak. 3 The noise-limited resolution is defined as the signal amplitude (rms) at which the signal-to-noise ratio is 0 db with Hz spectral resolution, for frequencies above khz measured on a mirror. The attainable resolution is frequency-dependent. The typical value refers to the center of the operating frequency. MHz g % V peak Range diagram Multi-purpose high frequency bandwidth digital decoder with high precision and high resolution True DC capability Well balanced properties regarding bandwidth, resolution and velocity limits make it the decoder of choice for most measurement applications Universal decoder, included in all models 00 m/s 5 m/s.5 m/s 0 m/s 5 m/s.5 m/s.5 m/s m/s 500 mm/s 50 mm/s 5 mm/s 00 mm/s 0 mm/s mm/s 00 µm/s 0 µm/s µm/s Lower Limit: 0 Hz.5 m/s/v.5 m/s/v 0.5 m/s/v 50 mm/s/v 5 mm/s/v 50 mm/s/v 5 mm/s/v.5 mm/s/v Ranges Detectable Acceleration: 4,000,000 g Vibrational :.5 MHz Min. Detectable Velocity: 0.04 µm/s 0. Hz Hz 0 Hz 00 Hz khz 0 khz 00 khz 50 khz MHz.5 MHz.5 MHz 0 MHz 6

7 VX-08 digital high-resolution velocity decoder Measurement Full scale output (peak) Typical resolution acceleration linearity error mm/s/v m/s µm s - / Hz , , , , The full scale values correspond to the maximum output voltage of 0 V peak. The noise-limited resolution is defined as the signal amplitude (rms) at which the signal-to-noise ratio is 0 db with Hz spectral resolution, for frequencies above khz measured on a mirror. The attainable resolution is frequency-dependent. The typical value refers to the center of the operating frequency. khz g % Range diagram V peak Detectable Acceleration: 0,000 g 0 m/s.5 m/s m/s 500 mm/s 50 mm/s 5 mm/s 00 mm/s 50 mm/s 5 mm/s.5 mm/s 0 mm/s 5 mm/s mm/s 5 mm/s/v 50 mm/s/v 5 mm/s/v.5 mm/s/v 5 mm/s/v.5 mm/s/v.5 mm/s/v 0.5 mm/s/v Ranges Digital velocity decoder dedicated to low frequencies up to 5 khz with highest resolution Highest optical sensitivity for measurement on dark surfaces True DC capability Outstanding linearity and frequency response Included in models R and RD 00 µm/s 0 µm/s µm/s Lower Limit: 0 Hz Vibrational : 5 khz Min. Detectable Velocity: µm/s 0. Hz Hz 0 Hz 00 Hz khz 5 khz 0 khz 0 khz 5 khz 00 khz MHz 7

8 Displacement decoders DX-900 broadband digital displacement decoder Measurement Full scale output (peak-to-peak) Resolution 3 velocity µm/v µm nm khz m/s , , , , , , , , , , , , , , , ,500 5,50 5, ,500 5,500 50, , ,000 00, ,500 5,500 50, ,500 5 The full scale values correspond to ±0 V (peak-to-peak) maximum output voltage. The resolution corresponds to the quantization step of approx. 0.3 mv at the analog output. Noise-limited resolution: < 0.75 pm/ Hz in the smallest measurement. The noise-limited resolution is defined as the signal amplitude (rms) at which the signal-to-noise ratio is 0 db with Hz spectral resolution, for frequenciey above khz measured on a mirror. 3 When a suitable measurement has been selected for the digital velocity decoder VX-09, which is required for using the DX-900. Range diagram Amplitude (peak) Broadband displacement decoder up to.5 MHz Supplements VX-09 velocity decoder for high precision displacement measurements with resolutions down to 40 pm 6 measurement s Included in models MD, RD and VD 5 mm 00 mm 50 mm 5 mm.5 mm 0 mm 5 mm.5 mm.5 mm mm 500 µm 50 µm 5 µm 00 µm 50 µm 5 µm.5 µm 0 µm 5 µm.5 µm.5 µm µm 00 nm 0 nm Displacement: 5 mm Lower Limit: 0 Hz.5 m/s/v.5 m/s/v 0.5 m/s/v 5 mm/s/v 50 mm/s/v 5 mm/s/v.5 mm/s/v 50 mm/s/v :.5 MHz Hz 0 Hz 00 Hz khz 0 khz 00 khz 50 khz MHz.5 MHz.5 MHz 0 MHz 8

9 DX-300 analog displacement decoder for ultrasonic applications Measurement nm/v Full scale output (peak) nm Resolution pm/ Hz 5 ±88 < ,000 ( 3dB) The full scale value corresponds to the output voltage swing of ±.5 V at load resistance 50 Ω. The noise-limited resolution is defined as the signal amplitude (rms) at which the signal-to-noise ratio is 0 db with Hz spectral resolution for frequencies above 30 khz measured on a mirror. khz Range diagram Amplitude (peak-peak) µm 375 nm 00 nm Displacement: 375 nm Displacement decoder for measuring smallest motions up to ± 88 nm with a large frequency bandwidth from 30 khz up to 4 MHz 0 nm nm For measurements on ultrasonic transducers, detection of ultrasonic pulses and to observe fast transient motions of MEMS devices 00 pm 0 pm pm < 0. pm khz 0 khz Lower Limit: 30 khz 30 khz 00 khz MHz 0 MHz 4 MHz : 4 MHz 00 MHz Special high-pass filter suppresses low frequency (acoustic) vibrations and allows the detection of smallest high-frequency vibrations even under noisy ambient conditions Additional MHz low-pass filter improves resolution performance in lower frequency Included in models V and VD 9

10 Acceleration decoder AX-00 acceleration decoder Measurement Measurement velocity accelaration Full scale accelaration output (peak) Signal frequency (switchable) mm/s/v m/s²/v m/s² Hz.5 5, ,000 / 0, , ,000 / 0, , ,000 / 0,000 5,50, ,000 / 0,000 50,500 5, ,000 / 0, ,000 50, ,000 / 0,000,50,500 5, ,000 / 0,000,500 5,000 50, ,000 / 0,000 The full scale values correspond to the maximum output voltage of 0 V peak. Value is valid, as long as the corresponding velocity measurement is not saturated. Acceleration Range diagram m/s 0.5Hz 0kHz bandwidth 50,000 m/s² maximum acceleration 8 measurement s (coupled to VX-09 velocity decoder s) Available as an option in models M, MD, R and RD m/s 5000 m/s m/s m/s 5000 m/s 500 m/s 0000 m/s 5000 m/s 500 m/s 50 m/s 000 m/s 00 m/s 0 m/s Velocity 5 m/s Velocity.5 m/s Velocity 5 m/s Velocity.5 m/s Velocity.5 m/s Velocity 500 mm/s Velocity 50 mm/s Velocity 5 mm/s m/s 00 mm/s 0 mm/s 5 mm/s mm/s 0. Hz 0.5 Hz Min. Limit: 0.5 Hz Hz 0 Hz 00 Hz khz.6 khz 0 khz : 0 khz 0 khz 00 khz 0

11 Compliance with standards Laser safety IEC Electrical safety IEC 600- EMC IEC 636- Emission: Limit class B IEC/EN and Immunity: IEC/EN to and IEC/EN Dimensions 3.8 A Ø M6 6 Ø4F8 5 /4-0 UNC Ø 4F M6 6 B B 00 Manufactured by: GmbH D Waldbronn, Germany Model No.: MLV Serial No.: x xx xxxx Mfg.-Date: mm.yyyy 53 All dimensions in mm if not marked otherwise A Stand-off distance B Beam

12 Measuring vibration non-contact and highly precise with Polytec laser Doppler vibrometers. The optional VibSoft data acquisition hardware and analysis software allows quick and intuitive analysis and visualization of your vibration measurement data. OM_DS_OFV-5000_Xtra_E_ /05 - Technical specifications are subject to change without notice. Polytec GmbH (Germany) Polytec-Platz Waldbronn Tel info@polytec.de Polytec GmbH (Germany) Vertriebs- und Beratungsbüro Schwarzschildstraße 489 Berlin Tel Polytec, Inc. (USA) North American Headquarters 6400 Bake Parkway Suites 50 & 00 Irvine, CA 968 Tel info@polytec.com Central Office 046 Baker Road Dexter, MI 4830 Tel East Coast Office Cabot Road Suites 0 & 0 Hudson, MA 0749 Tel Polytec Ltd. (Great Britain) Lambda House Batford Mill Harpenden, Herts AL5 5BZ Tel info@polytec-ltd.co.uk Polytec France S.A.S. Technosud II Bâtiment A 99, Rue Pierre Semard 930 Châtillon Tel info@polytec.fr Polytec Japan Arena Tower, 3th floor 3--9, Shinyokohama Kohoku-ku, Yokohama-shi Kanagawa Tel info@polytec.co.jp Polytec South-East Asia Pte. Ltd. Blk 400 Ang Mo Kio Ave 0 #06-06 TechPlace I Singapore Tel info@polytec-sea.com Polytec China Ltd. Room 40, Tower B Minmetals Plaza No. 5 Chaoyang North Ave Dongcheng District 0000 Beijing Tel info-cn@polytec.com