RF Exposure Evaluation Declaration

Size: px

Start display at page:

Download "RF Exposure Evaluation Declaration"

Malcolm Wade
5 years ago
Views:

RF Exposure Evaluation Declaration Product Name : 1, AC1600 WLAN Telefon DSL Router 2, AC1200 WLAN Telefon DSL Router 3, AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router Model No.

1 RF Exposure Evaluation Declaration Product Name : 1, AC1600 WLAN Telefon DSL Router 2, AC1200 WLAN Telefon DSL Router 3, AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router Model No. : Archer VR600v; Archer VR400v Applicant : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4) Central Science and Technology Park,Shennan Rd, Nanshan, Shenzhen,China Date of Receipt : Jan. 12th, 2017 Test Date : Jan. 12th, 2017~ Mar. 01st, 2017 Issued Date : Mar. 17th, 2017 Report No. : R-RF-CE-P18V01 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification (Suzhou) Co., Ltd.

3 1. RF Exposure Measurement The scope of this standard is limited to apparatus which is intended for use by the general public as defined in the Council Recommendation 1999/519/EC of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) (Official Journal L 199 of 30 July 1999). This generic standard applies to electronic and electrical apparatus for which no dedicated product or product family standard regarding human exposure to electromagnetic fields applies. This generic standard does not cover equipment, which fulfils the requirements given in EN or is medical equipment as defined in the Council Directive 93/42/EEC of 14 June 1993 concerning medical devices. The frequency range covered is 0 Hz to 300 GHz. The object of this standard is to demonstrate the compliance of such apparatus with the basic restrictions or reference levels on exposure of the general public related to electric, magnetic, electromagnetic fields and induced and contact current Limits The electronic and electro-technical apparatus shall comply with the basic restriction as specified in Annex II of Council Recommendation 1999/519/EC. The reference levels in the Council Recommendation 1999/519/EC on public exposure to electromagnetic fields are derived from the basic restrictions using worst-case assumptions about exposure. According to EN50385, the reference level listed in the following table 2 shall be used to evaluate the environment impact of human exposure human exposure to electromagnetic fields (0 Hz GHz) as specified in 1999/519/EC. Page: 3 of 8

4 Council Recommendation 1999/519/EC of 12 July 1999 Table 2 Reference levels for electric, magnetic and electromagnetic fields (0 Hz to 300 GHz, unperturbed rms values) Frequency Range E-field Strength (V/m) H-field Strength (A/m) B-field (μt) Equivalent plane wave power density Seq (W/m2) 0-1 Hz 3.2 x x Hz x 10 4 /f 2 4 x 10 4 /f Hz /f 5000/f khz 250/f 4/f 5/f khz 250/f khz MHz /f 0.92/f 1-10 MHz 87/f 1/2 0.73/f 0.92/f MHz MHz f 1/ f 1/ f 1/2 f/ G Hz Notes: 1. as indicated in the frequency range column. 2. For frequencies between 100 khz and 10 GHz, Seq, E2, H2, and B2 are to be averaged over any six-minute period. 3. For frequencies exceeding 10 GHz, Seq, E2, H2, and B2 are to be averaged over any 68/ minute period ( in GHz). 4. No E-field value is provided for frequencies < 1 Hz, which are effectively static electric fields. For most people the annoying perception of surface electric charges will not occur at field strengths less than 25 kv/m. Spark discharges causing stress or annoyance should be avoided Assessment methods Under normal use of condition, this device has a separation distance of at least 20cm between the antenna and the body of the user. A radiation exposure statement this equipment should be installed and operated with minimum distance between the antenna Page: 4 of 8

5 and your body is shown on the user manual, so human exposure to the electromagnetic field of this product is at far-field region under normal use. Far-field region Calculation Formula: P watts are radiated, from a point, uniformly over the surface of sphere of radius r. In free space E = 0H = [30*P*G(, )]^0.5 / r Where G = antenna gain relative to an isotropic antenna, = elevation and azimuth angles to point of investigation r = distance from observation point to the antenna (m) = characteristic impedance of free space 1.3. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18 and 78 RH. Page: 5 of 8

6 1.4. Test Result of RF Exposure Evaluation Product : 1, AC1600 WLAN Telefon DSL Router 2, AC1200 WLAN Telefon DSL Router 3, AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router Model No. : Archer VR600v; Archer VR400v Test Item : RF Exposure Evaluation Test Site : AC-6 Note: 1. The difference of models is for different marketing requirement. 2. Archer VR600v has two versions, and only minor circuitry for non-transmitter portions(rx Filter and Hybrid Filter) changed, which has nothing effect with RF circuit. Antenna Gain 2.4G: Antenna manufacturer TP-Link Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic Sectorized antenna systems Cross-polarized antennas MIMO Unequal antenna gains, with equal transmit powers Spatial Multiplexing CDD Beam-forming Antenna Type External Dipole PIFA PCB Internal Ceramic Chip Antenna Metal plate type F antenna Cross-polarize Antenna Antenna Gain #1 Antenna Gain #2 2dBi 2dBi Page: 6 of 8

7 5G: Antenna manufacturer N/A Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic Sectorized antenna systems Cross-polarized antennas MIMO Unequal antenna gains, with equal transmit powers Spatial Multiplexing CDD Beam-forming Antenna Type External Dipole Internal PIFA PCB Ceramic Chip Antenna Metal plate type F antenna Cross-polarize Antenna Antenna Gain #1 3dBi Antenna Gain #2 3dBi Antenna Gain #3 3dBi Beam-forming Gain 2dBi Page: 7 of 8

8 RF Exposure Measurement Results: Standlone modes Operation Mode Frequency Range (MHz) Maximum EIRP (dbm) Power Density S(W/m 2 ) Limit of Power Density S(W/m 2 ) b/g/n(20MHz) 2412 ~ 2472 MHz n(40MHz) 2422 ~ 2462 MHz a/n/ac(20MHz) 5150 ~ 5250 MHz, n/ac(40MHz) 5150 ~ 5250 MHz, ac(80mhz) 5210 MHz Simultaneous transmission mode: Operation Mode Frequency Band (MHz) Power Density at R = Maximum EIRP 20 cm (dbm) (W/m 2 ) b/g/n 2412 ~ 2472 MHz a/n/ac 5150 ~ 5725 MHz Simultaneous transmission power density So simultaneous transmission power density is 0.588W/m 2 for 1, AC1600 WLAN Telefon DSL Router 2, AC1200 WLAN Telefon DSL Router 3, AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router installed without any other radio equipment. The End Page: 8 of 8

RF Exposure Evaluation Declaration

RF Exposure Evaluation Declaration Product Name : 300Mbps Wi-Fi Range Extender Model No. : TL-WA855RE Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central