FCC 47 CFR PART 15 SUBPART E CERTIFICATION TEST REPORT GPON SFU. MODEL No.: 7259G, 7258G, 7257G, 7253G, 7283G FCC ID: 2AGHCHBMT03

Transcription

1 FCC 47 CFR PART 15 SUBPART E CERTIFICATION TEST REPORT For GPON SFU MODEL No.: 7259G, 7258G, 7257G, 7253G, 7283G FCC ID: 2AGHCHBMT03 Trade Mark: iphotonix, Ligent, Hisense REPORT NO.: ES E2 ISSUE DATE: Dec.12, 2015 Prepared for Guangdong Hisense Broadband Technology Co., Ltd Building 2, No.8, Hisense Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China Prepared by SHENZHEN EMTEK CO., LTD Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: FAX: TRF No.: FCC /A Page 1 of 166 Report No.: ES E2 Ver.1.0

2 1 TEST RESULT CERTIFICATION Applicant: Manufacturer: Product Description: Model Number: File Number: Guangdong Hisense Broadband Technology Co., Ltd Building 2, No.8, Hisense Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China Guangdong Hisense Broadband Technology Co., Ltd Building 2, No.8, Hisense Road, Tangxia Town, Pengjiang District, Jiangmen, Guangdong, China GPON SFU 7259G, 7258G, 7257G, 7253G, 7283G ES E2 Date of Test: Nov. 24, 2015 to Dec. 12, 2015 Measurement Procedure Used: STANDARD FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart E APPLICABLE STANDARDS TEST RESULT PASS The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 2 and Part The test results of this report relate only to the tested sample identified in this report. Date of Test : Nov. 24, 2015 to Dec. 12, 2015 Prepared by : Joe Xia/Editor Reviewer : Jack Li/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF No.: FCC /A Page 2 of 166 Report No.: ES E2 Ver.1.0

3 TABLE OF CONTENTS Access to the World 1 TEST RESULT CERTIFICATION EUT TECHNICAL DESCRIPTION SUMMARY OF TEST RESULT TEST METHODOLOGY GENERAL DESCRIPTION OF APPLIED STANDARDS MEASUREMENT EQUIPMENT USED DESCRIPTION OF TEST MODES FACILITIES AND ACCREDITATIONS FACILITIES LABORATORY ACCREDITATIONS AND LISTINGS TEST SYSTEM UNCERTAINTY SETUP OF EQUIPMENT UNDER TEST RADIO FREQUENCY TEST SETUP RADIO FREQUENCY TEST SETUP CONDUCTED EMISSION TEST SETUP BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM SUPPORT EQUIPMENT TEST REQUIREMENTS BANDWIDTH MEASUREMENT MAXIMUM CONDUCTED OUTPUT POWER MAXIMUM PEAK POWER DENSITY FREQUENCY STABILITY UNDESIRABLE RADIATED SPURIOUS EMISSION POWER LINE CONDUCTED EMISSIONS ANTENNA APPLICATION TRF No.: FCC /A Page 3 of 166 Report No.: ES E2 Ver.1.0

4 2 EUT TECHNICAL DESCRIPTION Characteristics Device Type IEEE WLAN Mode Supported Data Rate MIMO Mode Modulation Operating Frequency Range Number of Channels Transmit Power Max Antenna Type Smart system Antenna Gain Description Wifi 2.4G Device b(20MHz bandwidth) g(20MHz bandwidth) n(20MHz bandwidth) n(40MHz bandwidth) b:1,2,5.5,11mbps g:6,9,12,18,24,36,48,54mbps n(HT20):MCS0-MCS n(HT40:MCS0-MCS23 2T2R DSSS with DBPSK/DQPSK/CCK for b OFDM with BPSK/QPSK/16QAM/64QAM for g/n MHz for b/g MHz for n(HT20) MHz for n(HT40) 11 channels for b/g 11 channels for n(HT20) 7 channels for n(HT40) 23.97dBm for b 21.41dBm for g 22.88dBm for /n(HT20) 21.64dBm for /n(HT40) PiFa Antenna SISO for b/g/n MIMO for n 3.0dBi DC supply: DC 12V/2.0A from adapter Adapter supply: For adapter 1 Model: RD C65-29MG Power supply INPUT: ~50/60Hz 0.6A OUTPUT: 12V/2.0A For adapter 2 Model: YJS024U U INPUT: ~50/60Hz 800mA OUTPUT: 12V/2.0A Note: for more details, please refer to the User s manual of the EUT. TRF No.: FCC /A Page 4 of 166 Report No.: ES E2 Ver.1.0

5 Characteristics Device Type IEEE WLAN Mode Supported Data Rate MIMO Mode Modulation Operating Frequency Range Number of Channels Transmit Power Max Antenna Type Smart system Antenna Gain Power supply Description Wifi 5G Device a(20MHz channel bandwidth) n(20MHz channel bandwidth) ac(20MHz channel bandwidth) n(40MHz channel bandwidth) ac(40MHz channel bandwidth) ac(80MHz channel bandwidth) a: 6,9,12,18,24,36,48,54Mbps; n(HT20):MCS0-MCS23; n(HT40):MCS0-MCS23; ac(VHT20):MCS0-MCS9; ac(VHT40):MCS0-MCS9; ac(VHT80):MCS0-MCS9; 3T3R OFDM with BPSK/QPSK/16QAM/64QAM for a/g/n; OFDM with BPSK/QPSK/16QAM/64QAM/256QAM for ac; MHz MHz Wifi 5G with 5150MHz-5250MHz Band 4 Channels for a; 4 Channels for n(HT20); 4 Channels for ac(VHT20); Wifi 5G with 5725MHz-5850MHz Band 5 Channels for a; 5 Channels for n(HT20); 5 Channels for ac(VHT20); 23.65dBm for a; 28.27dBm for /n(HT20); 24.12dBm for n(HT40); 29.81dBm for ac(VHT20); 24.35dBm for ac(VHT40); 24.27dBm for ac(VHT80); PCB Antenna SISO for a/n/ac MIMO for n/ac 5G with 5150MHz-5250MHz Band 4.5dBi 5G with 5725MHz-5850MHz Band 4.0dBi DC supply: DC 12V/2.0A from adapter Adapter supply: For adapter 1 Model: RD C65-29MG INPUT: ~50/60Hz 0.6A OUTPUT: 12V/2.0A 2 Channels Hz for n(HT40); 2 Channels for ac(VHT40); 1 Channel for ac(VHT80); 2 Channels for n(HT40); 2 Channels for ac(VHT40); 1 Channels for ac(VHT80); TRF No.: FCC /A Page 5 of 166 Report No.: ES E2 Ver.1.0

6 For adapter 2 Model: YJS024U U INPUT: ~50/60Hz 800mA OUTPUT: 12V/2.0A Note: for more details, please refer to the User s manual of the EUT. TRF No.: FCC /A Page 6 of 166 Report No.: ES E2 Ver.1.0

7 3 SUMMARY OF TEST RESULT FCC Part Clause Test Parameter Verdict Remark (a)(1) PASS 99%, 6dB and 26dB Bandwidth (a)(3) (a)(1) PASS Maximum Conducted Output Power (a)(3) (a)(1) PASS (a)(3) (b)(1) PASS (b)(4) Radiated Spurious Emission (b)(6) (a)(6) Peak Excursion PASS Radiated Spurious Emission PASS (g) Frequency Stability PASS (b)(6) Power Line Conducted Emission PASS (a)& Antenna Application PASS NOTE1: N/A (Not Applicable) NOTE2: According to FCC OET KDB D2 General UNII Test Procedures New Rules v01, In addition, the radiated test is also performed to ensure the emissions emanating from the device cabinet also comply with the applicable limits. RELATED SUBMITTAL(S) / GRANT(S): This submittal(s) (test report) is intended for FCC ID: 2AGHCHBMT03 filing to comply with Section of the FCC Part 15, Subpart E Rules. The system is compliance with Subpart B is authorized under a DOC procedure TRF No.: FCC /A Page 7 of 166 Report No.: ES E2 Ver.1.0

8 4 TEST METHODOLOGY 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS Access to the World According to its specifications, the EUT must comply with the requirements of the following standards: FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart E FCC KDB D2 General UNII Test Procedures New Rules v01 FCC KDB D01 Multiple Transmitter Output v02r01 FCC KDB D02 MIMO With Cross Polarized Antenna V MEASUREMENT EQUIPMENT USED Conducted Emission Test Equipment EQUIPMENT TYPE MFR MODEL NUMBER SERIAL NUMBER LAST CAL. Test Receiver Rohde & Schwarz ESCS /018 05/16/2015 L.I.S.N. Schwarzbeck NNLK /16/ Ω Coaxial Switch Anritsu MP59B M20531 N/A Pulse Limiter Rohde & Schwarz ESH3-Z /16/2015 Voltage Probe Rohde & Schwarz TK9416 N/A 05/16/2015 I.S.N Rohde & Schwarz ENY /16/ Radiated Emission Test Equipment EQUIPMENT MFR MODEL SERIAL LAST CAL. TYPE NUMBER NUMBER EMI Test Receiver Rohde & Schwarz ESU /16/2015 Pre-Amplifier HP 8447D 2944A /16/2015 Bilog Antenna Schwarzbeck VULB /16/2015 Loop Antenna ARA PLA-1030/B /16/2015 Horn Antenna Schwarzbeck BBHA 9170 BBHA /16/2015 Horn Antenna Schwarzbeck BBHA 9120 D143 05/16/2015 Cable Schwarzbeck AK9513 ACRX1 05/16/2015 Cable Rosenberger N/A FP2RX2 05/16/2015 Cable Schwarzbeck AK9513 CRPX1 05/16/2015 Cable Schwarzbeck AK9513 CRRX2 05/16/ Radio Frequency Test Equipment EQUIPMENT MFR TYPE MODEL NUMBER SERIAL NUMBER LAST CAL. Spectrum Analyzer Agilent E4407B /16/2015 Signal Analyzer Agilent N9010A My /16/2015 Power meter Anritsu ML2495A /16/2015 Power sensor Anritsu MA2411B /16/2015 Remark: Each piece of equipment is scheduled for calibration once a year. TRF No.: FCC /A Page 8 of 166 Report No.: ES E2 Ver.1.0

9 4.3 DESCRIPTION OF TEST MODES Access to the World The EUT has been tested under its typical operating condition. The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner which intends to maximize its emission characteristics in a continuous normal application. The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. Test of channel included the lowest and middle and highest frequency to perform the test, then record on this report. Those modulation ( a; n (HT20); n (HT40); ac (HT20); ac (HT40); ac (HT80);) were used for all test. Pre-defined engineering program for regulatory testing used to control the EUT for staying in continuous transmitting and receiving mode is programmed. Frequency and Channel list for a/n(HT20)/ac(VHT20) band I ( MHz): Channel Frequency Frequency Frequency Channel Channel (MHz) (MHz) (MHz) CH CH CH CH Frequency and Channel list for a/n(HT20)/ac(VH20) band III ( MHz): Channel Frequency Frequency Frequency Channel Channel (MHz) (MHz) (MHz) CH CH CH CH CH Frequency and Channel list for n(HT40)/ac(VHT40) band I ( MHz): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) CH CH Frequency and Channel list for n(HT40)/ac(VHT40) band III ( MHz): Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) CH CH Frequency and Channel list for ac(VHT80) band I ( MHz): Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) Frequency and Channel list for ac(VHT80) band III ( MHz): Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) TRF No.: FCC /A Page 9 of 166 Report No.: ES E2 Ver.1.0

10 Test Frequency and Channel for a/n(HT20)/ac(VH20) band I ( MHz): Access to the World Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) CH CH CH Test Frequency and channel for a/n(HT20)/ac(VH20) band III ( MHz): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) CH CH CH Test Frequency and Channel for n(HT40)/ac(VHT40) band I ( MHz): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) CH CH Test Frequency and channel for n(HT40)/ac(VHT40) band III ( MHz): Lowest Frequency Middle Frequency Highest Frequency Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) CH CH Frequency and Channel list for ac(VHT80) band I ( MHz): Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) Frequency and Channel list for ac(VHT80) band III ( MHz): Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) TRF No.: FCC /A Page 10 of 166 Report No.: ES E2 Ver.1.0

11 5 FACILITIES AND ACCREDITATIONS 5.1 FACILITIES All measurement facilities used to collect the measurement data are located at Bldg 69, Majialong Industry Zone District, Nanshan District, Shenzhen, China The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR Publication LABORATORY ACCREDITATIONS AND LISTINGS Site Description EMC Lab. : Accredited by CNAS, The certificate is valid until The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L2291. Accredited by TUV Rheinland Shenzhen The Laboratory has been assessed according to the requirements ISO/IEC Accredited by FCC, April 17, 2013 The Certificate Registration Number is Accredited by FCC, July 24, 2013 The Certificate Registration Number is Accredited by Industry Canada, November 29, 2012 The Certificate Registration Number is 4480A. Name of Firm : SHENZHEN EMTEK CO., LTD. Site Location : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TRF No.: FCC /A Page 11 of 166 Report No.: ES E2 Ver.1.0

12 6 TEST SYSTEM UNCERTAINTY The following measurement uncertainty levels have been estimated for tests performed on the apparatus: Parameter Uncertainty Radio Frequency ±1x10^-5 Maximum Peak Output Power Test ±1.0dB Conducted Emissions Test ±2.0dB Radiated Emission Test ±2.0dB Power Density ±2.0dB Occupied Bandwidth Test ±1.0dB Band Edge Test ±3dB All emission, radiated ±3dB Antenna Port Emission ±3dB Temperature ±0.5 Humidity ±3% Measurement Uncertainty for a level of Confidence of 95% TRF No.: FCC /A Page 12 of 166 Report No.: ES E2 Ver.1.0

13 7 SETUP OF EQUIPMENT UNDER TEST 7.1 RADIO FREQUENCY TEST SETUP The WLAN component s antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate attenuator. The EUT is controlled by PC/software to emit the specified signals for the purpose of measurements. EUT Attenuator 7.2 RADIO FREQUENCY TEST SETUP The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 db according to the standards: ANSI C The test distance is 3m.The setup is according to the requirements in Section of ANSI C and CAN/CSA-CEI/IEC CISPR 22. Below 30MHz The EUT is placed on a turntable 0.8 meters above the ground in the chamber, 3 meter away from the antenna (loop antenna). The Antenna should be positioned with its plane vertical at the specified distance from the EUT and rotated about its vertical axis for maximum response at each azimuth about the EUT. The center of the loop shall be 1 m above the ground. For certain applications, the loop antenna plane may also need to be positioned horizontally at the specified distance from the EUT. Above 30MHz The EUT is placed on a turntable 0.8 meters above the ground in the chamber, 3 meter away from the antenna. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0 to 360, and the receive antenna has two polarizations Vertical (V) and Horizontal (H). Above 1GHz (Note: the FCC s permission to use 1.5m as an alternative per TCBC Conf call of Dec. 2, 2014.) The EUT is placed on a turntable 1.5 meters above the ground in the chamber, 3 meter away from the antenna. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0 to 360, and the receive antenna has two polarizations Vertical (V) and Horizontal (H). (a) Radiated Emission Test Set-Up, Frequency Below 30MHz Measurement Instrument Turntable EUT 3m 0.8 m Test Receiver Ground Plane Coaxial Cable TRF No.: FCC /A Page 13 of 166 Report No.: ES E2 Ver.1.0

14 (b) Radiated Emission Test Set-Up, Frequency Below 1000MHz 3m Test Receiver Turntable EUT 0.8m 1m to 4m Ground Plane Coaxial Cable (c) Radiated Emission Test Set-Up, Frequency above 1000MHz 3m Turntable 4m EUT 1.5m 1.5m Amplifier Test Receiver TRF No.: FCC /A Page 14 of 166 Report No.: ES E2 Ver.1.0

15 7.3 CONDUCTED EMISSION TEST SETUP The mains cable of the EUT (maybe per AC/DC Adapter) must be connected to LISN. The LISN shall be placed 0.8 m from the boundary of EUT and bonded to a ground reference plane for LISN mounted on top of the ground reference plane. This distance is between the closest points of the LISN and the EUT. All other units of the EUT and associated equipment shall be at least 0.8m from the LISN. Ground connections, where required for safety purposes, shall be connected to the reference ground point of the LISN and, where not otherwise provided or specified by the manufacturer, shall be of same length as the mains cable and run parallel to the mains connection at a separation distance of not more than 0.1 m. According to the requirements in Section of ANSI C Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode. Access to the World EMI Receiver Reference Ground EUT Auxiliary Equipment Reference Ground 50Ω LISN 80cm 80cm LISN TRF No.: FCC /A Page 15 of 166 Report No.: ES E2 Ver.1.0

16 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM EUT Ac Adapter Ac Source 7.5 SUPPORT EQUIPMENT Item Equipment Mfr/Brand Model/Type No. FCC ID Series No. Note 1. N/A N/A N/A N/A N/A Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer s requirements and conditions for the intended use. TRF No.: FCC /A Page 16 of 166 Report No.: ES E2 Ver.1.0

17 8 TEST REQUIREMENTS 8.1 BANDWIDTH MEASUREMENT Applicable Standard According to FCC Part (a)(1) for band MHz and KDB D2 According to FCC Part (a)(3) for band MHz and KDB D Conformance Limit No limit requirement. The minimum 6 db emission bandwidth of at least 500 KHz for the band GHz Test Configuration Test according to clause 6.1 radio frequency test setup Test Procedure Connect the antenna port(s) to the spectrum analyzer input. Using the spectrum analyzer Channel Bandwidth mode, configure the spectrum analyzer as shown below The following procedure shall be used for measuring (26 db) power bandwidth: Center Frequency: test Frequency Set RBW = approximately 1% of the emission bandwidth. Set the VBW > RBW. Detector = Peak. Trace mode = max hold. X db Bandwidth: 26 db Measure the maximum width of the emission that is 26 db down from the maximum of the emission. Compare this with the RBW setting of the analyzer. Readjust RBW and repeat measurement as needed until the RBW/EBW ratio is approximately 1%. Minimum Emission Bandwidth for the band GHz Center Frequency: test Frequency Set RBW = 100 khz Set VBW 3 RBW Detector = Peak Trace mode = max hold Sweep = auto couple X db Bandwidth: 6 db Note: The automatic bandwidth measurement capability of a spectrum analyzer or EMI receiver may be employed if it implements the functionality described above. The following procedure shall be used for measuring (99 %) power bandwidth: Set center frequency to the nominal EUT channel center frequency. Set span = 1.5 times to 5.0 times the OBW. Set RBW = 1 % to 5 % of the OBW Set VBW 3 RBW Video averaging is not permitted. Where practical, a sample detection and single sweep mode shall be used. Otherwise, peak detection and max hold mode (until the trace stabilizes) shall be used. Use the 99 % power bandwidth function of the instrument (if available). If the instrument does not have a 99 % power bandwidth function, the trace data points are recovered and directly summed in power units. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 % of the total is reached; that frequency is recorded as the lower frequency. The process is repeated until 99.5 % of the total is reached; that frequency is recorded as the upper frequency. The 99% occupied bandwidth is the difference between these two frequencies. TRF No.: FCC /A Page 17 of 166 Report No.: ES E2 Ver.1.0

18 8.1.5 Test Results Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Operation Mode a n (HT20) n (HT40) ac (VHT20) ac (VHT40) ac (VHT80) Note: N/A (Not Applicable) Channel Channel Limit 26dB EBW 99% OBW Number Frequency (MHz) (MHz) Verdict CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Operation Mode a n (HT20) n (HT40) ac (VHT20) ac (VHT40) ac (VHT80) Note: N/A (Not Applicable) Channel Channel Limit 26dB EBW 99% OBW Number Frequency (MHz) (MHz) Verdict CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS CH N/A PASS TRF No.: FCC /A Page 18 of 166 Report No.: ES E2 Ver.1.0

19 Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Operation Mode a n (HT20) n (HT40) ac (VHT20) ac (VHT40) ac (VHT80) Note: N/A (Not Applicable) Channel Channel Number Frequency (MHz) 6dB Min EBW Limit (KHz) Verdict CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS TRF No.: FCC /A Page 19 of 166 Report No.: ES E2 Ver.1.0

20 26dB emission bandwidth a Frequency Band I ( MHz) Channel 36: 5180MHz 26dB emission bandwidth a Frequency Band I ( MHz) Channel 44: 5220MHz TRF No.: FCC /A Page 20 of 166 Report No.: ES E2 Ver.1.0

21 26dB emission bandwidth a Frequency Band I ( MHz) Channel 48: 5240MHz TRF No.: FCC /A Page 21 of 166 Report No.: ES E2 Ver.1.0

22 26dB emission bandwidth n(HT20) Frequency Band I ( MHz) Channel 36: 5180MHz 26dB emission bandwidth n(HT20) Frequency Band I ( MHz) Channel 44: 5220MHz TRF No.: FCC /A Page 22 of 166 Report No.: ES E2 Ver.1.0

23 26dB emission bandwidth n(HT20) Frequency Band I ( MHz) Channel 48: 5240MHz TRF No.: FCC /A Page 23 of 166 Report No.: ES E2 Ver.1.0

24 26dB emission bandwidth ac(VHT20) Frequency Band I ( MHz) Channel 36: 5180MHz 26dB emission bandwidth ac(VHT20) Frequency Band I ( MHz) Channel 44: 5220MHz TRF No.: FCC /A Page 24 of 166 Report No.: ES E2 Ver.1.0

25 26dB emission bandwidth ac(VHT20) Frequency Band I ( MHz) Channel 48: 5240MHz TRF No.: FCC /A Page 25 of 166 Report No.: ES E2 Ver.1.0

26 26dB emission bandwidth n(HT40) Frequency Band I ( MHz) Channel 38: 5190MHz 26dB emission bandwidth n(HT40) Frequency Band I ( MHz) Channel 46: 5230MHz TRF No.: FCC /A Page 26 of 166 Report No.: ES E2 Ver.1.0

27 26dB emission bandwidth ac(VHT40) Frequency Band I ( MHz) Channel 38: 5190MHz 26dB emission bandwidth ac(VHT40) Frequency Band I ( MHz) Channel 46: 5230MHz TRF No.: FCC /A Page 27 of 166 Report No.: ES E2 Ver.1.0

28 26dB emission bandwidth ac(VHT80) Frequency Band I ( MHz) Channel 42: 5210MHz TRF No.: FCC /A Page 28 of 166 Report No.: ES E2 Ver.1.0

29 26dB emission bandwidth a Frequency Band III ( MHz) Channel 149: 5745MHz 26dB emission bandwidth a Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 29 of 166 Report No.: ES E2 Ver.1.0

30 26dB emission bandwidth a Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 30 of 166 Report No.: ES E2 Ver.1.0

31 26dB emission bandwidth n(HT20) Frequency Band III ( MHz) Channel 149: 5745MHz 26dB emission bandwidth n(HT20) Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 31 of 166 Report No.: ES E2 Ver.1.0

32 26dB emission bandwidth n(HT20) Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 32 of 166 Report No.: ES E2 Ver.1.0

33 26dB emission bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 149: 5745MHz 26dB emission bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 33 of 166 Report No.: ES E2 Ver.1.0

34 26dB emission bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 34 of 166 Report No.: ES E2 Ver.1.0

35 26dB emission bandwidth n(HT40) Frequency Band III ( MHz) Channel 151: 5755MHz 26dB emission bandwidth n(HT40) Frequency Band III ( MHz) Channel 159: 5795MHz TRF No.: FCC /A Page 35 of 166 Report No.: ES E2 Ver.1.0

36 26dB emission bandwidth ac(VHT40) Frequency Band III ( MHz) Channel 151: 5755MHz 26dB emission bandwidth ac(VHT40) Frequency Band III ( MHz) Channel 159: 5795MHz TRF No.: FCC /A Page 36 of 166 Report No.: ES E2 Ver.1.0

37 26dB emission bandwidth ac(VHT80) Frequency Band III ( MHz) Channel 155: 5775MHz TRF No.: FCC /A Page 37 of 166 Report No.: ES E2 Ver.1.0

38 99% Occupied Bandwidth a Frequency Band I ( MHz) Channel 36: 5180MHz 99% Occupied Bandwidth a Frequency Band I ( MHz) Channel 44: 5220MHz TRF No.: FCC /A Page 38 of 166 Report No.: ES E2 Ver.1.0

39 99% Occupied Bandwidth a Frequency Band I ( MHz) Channel 48: 5240MHz TRF No.: FCC /A Page 39 of 166 Report No.: ES E2 Ver.1.0

40 99% Occupied Bandwidth n(HT20) Frequency Band I ( MHz) Channel 36: 5180MHz 99% Occupied Bandwidth n(HT20) Frequency Band I ( MHz) Channel 44: 5220MHz TRF No.: FCC /A Page 40 of 166 Report No.: ES E2 Ver.1.0

41 99% Occupied Bandwidth n(HT20) Frequency Band I ( MHz) Channel 48: 5240MHz TRF No.: FCC /A Page 41 of 166 Report No.: ES E2 Ver.1.0

42 99% Occupied Bandwidth ac(VHT20) Frequency Band I ( MHz) Channel 36: 5180MHz 99% Occupied Bandwidth ac(VHT20) Frequency Band I ( MHz) Channel 44: 5220MHz TRF No.: FCC /A Page 42 of 166 Report No.: ES E2 Ver.1.0

43 99% Occupied Bandwidth ac(VHT20) Frequency Band I ( MHz) Channel 48: 5240MHz TRF No.: FCC /A Page 43 of 166 Report No.: ES E2 Ver.1.0

44 99% Occupied Bandwidth n(HT40) Frequency Band I ( MHz) Channel 38: 5190MHz 99% Occupied Bandwidth n(HT40) Frequency Band I ( MHz) Channel 46: 5230MHz TRF No.: FCC /A Page 44 of 166 Report No.: ES E2 Ver.1.0

45 99% Occupied Bandwidth ac(VHT40) Frequency Band I ( MHz) Channel 38: 5190MHz 99% Occupied Bandwidth ac(VHT40) Frequency Band I ( MHz) Channel 46: 5230MHz TRF No.: FCC /A Page 45 of 166 Report No.: ES E2 Ver.1.0

46 99% Occupied Bandwidth ac(VHT80) Frequency Band I ( MHz) Channel 42: 5210MHz TRF No.: FCC /A Page 46 of 166 Report No.: ES E2 Ver.1.0

47 99% Occupied Bandwidth a Frequency Band III ( MHz) Channel 149: 5745MHz 99% Occupied Bandwidth a Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 47 of 166 Report No.: ES E2 Ver.1.0

48 99% Occupied Bandwidth a Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 48 of 166 Report No.: ES E2 Ver.1.0

49 99% Occupied Bandwidth n(HT20) Frequency Band III ( MHz) Channel 149: 5745MHz 99% Occupied Bandwidth n(HT20) Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 49 of 166 Report No.: ES E2 Ver.1.0

50 99% Occupied Bandwidth n(HT20) Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 50 of 166 Report No.: ES E2 Ver.1.0

51 99% Occupied Bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 149: 5745MHz 99% Occupied Bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 51 of 166 Report No.: ES E2 Ver.1.0

52 99% Occupied Bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 52 of 166 Report No.: ES E2 Ver.1.0

53 99% Occupied Bandwidth n(HT40) Frequency Band III ( MHz) Channel 151: 5755MHz 99% Occupied Bandwidth n(HT40) Frequency Band III ( MHz) Channel 159: 5795MHz TRF No.: FCC /A Page 53 of 166 Report No.: ES E2 Ver.1.0

54 99% Occupied Bandwidth ac(VHT40) Frequency Band III ( MHz) Channel 151: 5755MHz 99% Occupied Bandwidth ac(VHT40) Frequency Band III ( MHz) Channel 159: 5795MHz TRF No.: FCC /A Page 54 of 166 Report No.: ES E2 Ver.1.0

55 99% Occupied Bandwidth ac(VHT80) Frequency Band III ( MHz) Channel 155: 5775MHz TRF No.: FCC /A Page 55 of 166 Report No.: ES E2 Ver.1.0

56 6dB Minimum Emission Bandwidth a Frequency Band III ( MHz) Channel 149: 5745MHz 6dB Minimum Emission Bandwidth a Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 56 of 166 Report No.: ES E2 Ver.1.0

57 6dB Minimum Emission Bandwidth a Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 57 of 166 Report No.: ES E2 Ver.1.0

58 6dB Minimum Emission Bandwidth n(HT20) Frequency Band III ( MHz) Channel 149: 5745MHz 6dB Minimum Emission Bandwidth n(HT20) Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 58 of 166 Report No.: ES E2 Ver.1.0

59 6dB Minimum Emission Bandwidth n(HT20) Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 59 of 166 Report No.: ES E2 Ver.1.0

60 6dB Minimum Emission Bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 149: 5745MHz 6dB Minimum Emission Bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 60 of 166 Report No.: ES E2 Ver.1.0

61 6dB Minimum Emission Bandwidth ac(VHT20) Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 61 of 166 Report No.: ES E2 Ver.1.0

62 6dB Minimum Emission Bandwidth n(HT40) Frequency Band III ( MHz) Channel 151: 5755MHz 6dB Minimum Emission Bandwidth n(HT40) Frequency Band III ( MHz) Channel 159: 5795MHz TRF No.: FCC /A Page 62 of 166 Report No.: ES E2 Ver.1.0

63 6dB Minimum Emission Bandwidth ac(VHT40) Frequency Band III ( MHz) Channel 151: 5755MHz 6dB Minimum Emission Bandwidth ac(VHT40) Frequency Band III ( MHz) Channel 159: 5795MHz TRF No.: FCC /A Page 63 of 166 Report No.: ES E2 Ver.1.0

64 6dB Minimum Emission Bandwidth ac(VHT80) Frequency Band III ( MHz) Channel 155: 5775MHz TRF No.: FCC /A Page 64 of 166 Report No.: ES E2 Ver.1.0

65 8.2 MAXIMUM CONDUCTED OUTPUT POWER Applicable Standard According to FCC Part (a)(1) for band MHz and KDB D2 According to FCC Part (a)(3) for band MHz and KDB D Conformance Limit For the band GHz, (a) (1) (i) For an outdoor access point operating in the band GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W provided the maximum antenna gain does not exceed 6 dbi. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi. The maximum e.i.r.p. at any elevation angle above 30 degrees as measured from the horizon must not exceed 125 mw (21 dbm). (a) (1) (ii) For an indoor access point operating in the band GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W provided the maximum antenna gain does not exceed 6 dbi. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi. (a) (1) (iii) For fixed point-to-point access points operating in the band GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W. Fixed point-to-point U-NII devices may employ antennas with directional gain up to 23 dbi without any corresponding reduction in the maximum conducted output power or maximum power spectral density. For fixed point-to-point transmitters that employ a directional antenna gain greater than 23 dbi, a 1 db reduction in maximum conducted output power and maximum power spectral density is required for each 1 db of antenna gain in excess of 23 dbi. Fixed, point-to-point operations exclude the use of point-to-multipoint systems, omnidirectional applications, and multiple collocated transmitters transmitting the same information. The operator of the U-NII device, or if the equipment is professionally installed, the installer, is responsible for ensuring that systems employing high gain directional antennas are used exclusively for fixed, point-to-point operations. (a) (1) (iv) For mobile and portable client devices in the GHz band, the maximum conducted output power over the frequency band of operation shall not exceed 250 mw provided the maximum antenna gain does not exceed 6 dbi. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi. For the band GHz (a) (3)For the band GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W. In addition, the maximum power spectral density shall not exceed 30 dbm in any 500-kHz band. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi Test Configuration Test according to clause 6.1 radio frequency test setup Test Procedure The maximum average conducted output power can be measured using Method PM-G (Measurement using a gated RF average power meter): Measurements may be performed using a wideband gated RF power meter provided that the gate parameters are adjusted such that the power is measured only when the EUT is transmitting at its maximum power control level. Since the measurement is made only during the ON time of the transmitter, no duty cycle correction factor is required. a. The Transmitter output (antenna port) was connected to the power meter. b. Turn on the EUT and power meter and then record the power value. c. Repeat above procedures on all channels needed to be tested. TRF No.: FCC /A Page 65 of 166 Report No.: ES E2 Ver.1.0

66 8.2.5 Test Results Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 1 Mode: SISO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS a CH PASS CH PASS CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 2 Mode: SISO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS a CH PASS CH PASS CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) TRF No.: FCC /A Page 66 of 166 Report No.: ES E2 Ver.1.0

67 Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 3 Mode: SISO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS a CH PASS CH PASS CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: Mode: MIMO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) TRF No.: FCC /A Page 67 of 166 Report No.: ES E2 Ver.1.0

68 Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 1 Mode: SISO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS a CH PASS CH PASS CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 2 Mode: SISO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS a CH PASS CH PASS CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) TRF No.: FCC /A Page 68 of 166 Report No.: ES E2 Ver.1.0

69 Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 3 Mode: SISO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS a CH PASS CH PASS CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: Mode: MIMO Operation Channel Channel Frequency Measurement Limit Mode Number (MHz) Level (dbm) (dbm) Verdict CH PASS n CH PASS (HT20) CH PASS n CH PASS (HT40) CH PASS CH PASS ac CH PASS (VHT20) CH PASS ac CH PASS (VHT40) CH PASS ac (VHT80) CH PASS Note: N/A (Not Applicable) TRF No.: FCC /A Page 69 of 166 Report No.: ES E2 Ver.1.0

70 8.3 MAXIMUM PEAK POWER DENSITY Applicable Standard According to FCC Part (a)(1) for band MHz and KDB D2 According to FCC Part (a)(3) for band MHz and KDB D Conformance Limit For the band GHz, (a) (1) (i) For an outdoor access point operating in the band GHz, the maximum power spectral density shall not exceed 17 dbm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi. The maximum e.i.r.p. at any elevation angle above 30 degrees as measured from the horizon must not exceed 125 mw (21 dbm). (a) (1) (ii) For an indoor access point operating in the band GHz, the maximum power spectral density shall not exceed 17 dbm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi. (a) (1) (iii) For fixed point-to-point access points operating in the band GHz, the maximum power spectral density shall not exceed 17 dbm in any 1 megahertz band. Fixed point-to-point U-NII devices may employ antennas with directional gain up to 23 dbi without any corresponding reduction in the maximum conducted output power or maximum power spectral density. For fixed point-to-point transmitters that employ a directional antenna gain greater than 23 dbi, a 1 db reduction in maximum conducted output power and maximum power spectral density is required for each 1 db of antenna gain in excess of 23 dbi. Fixed, point-to-point operations exclude the use of point-to-multipoint systems, omnidirectional applications, and multiple collocated transmitters transmitting the same information. The operator of the U-NII device, or if the equipment is professionally installed, the installer, is responsible for ensuring that systems employing high gain directional antennas are used exclusively for fixed, point-to-point operations. (a) (1) (iv) For mobile and portable client devices in the GHz band, the maximum power spectral density shall not exceed 11 dbm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi. For the band GHz (a) (3)For the band GHz, the maximum power spectral density shall not exceed 30 dbm in any 500-kHz band. If transmitting antennas of directional gain greater than 6 dbi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in db that the directional gain of the antenna exceeds 6 dbi Test Configuration Test according to clause 6.1 radio frequency test setup Test Procedure Methods refer to FCC KDB ) Create an average power spectrum for the EUT operating mode being tested by following the instructions in section E)2) for measuring maximum conducted output power using a spectrum analyzer or EMI receiver: select the appropriate test method (SA-3, or alternatives to each) and apply it up to, but not including, the step labeled, Compute power. 2) Use the peak search function on the instrument to find the peak of the spectrum. 3) The result is the PPSD. 4) The above procedures make use of 500kHz resolution bandwidth to satisfy the 500kHz measurement bandwidth specified in the (a)(5). That rule section also permits use of resolution bandwidths less than 1 MHz provided that the measured power is integrated to show the total power over the measurement bandwidth (i.e., 1 MHz). If measurements are performed using a reduced resolution bandwidth and integrated over 500kHz bandwidth Note: As a practical matter, it is recommended to use reduced RBW of 500 khz for the sections 5.c) and 5.d) above, since RBW=500 khz is available on nearly all spectrum analyzers. TRF No.: FCC /A Page 70 of 166 Report No.: ES E2 Ver.1.0

71 8.3.5 Test Results Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 1 Mode: SISO Operation Mode a n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/mhz) Limit (dbm/mhz) Verdict CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A ac (VHT40) ac (VHT80) CH N/A Note: N/A (Not Applicable) Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 2 Mode: SISO Operation Mode a n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/mhz) Limit (dbm/mhz) Verdict CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A ac (VHT40) ac (VHT80) CH N/A Note: N/A (Not Applicable) TRF No.: FCC /A Page 71 of 166 Report No.: ES E2 Ver.1.0

72 Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 3 Mode: SISO Operation Mode a n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/mhz) Limit (dbm/mhz) Verdict CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A ac (VHT40) ac (VHT80) CH N/A Note: N/A (Not Applicable) Frequency Band I ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: Mode: MIMO Operation Mode n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/mhz) Limit (dbm/mhz) Verdict CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A CH N/A ac (VHT40) ac (VHT80) CH N/A Note: N/A (Not Applicable) TRF No.: FCC /A Page 72 of 166 Report No.: ES E2 Ver.1.0

73 Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 1 Mode: SISO Operation Mode a n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/500khz) Limit (dbm/500khz) Verdict CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS ac (VHT40) ac (VHT80) CH PASS Note: N/A (Not Applicable) Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 2 Mode: SISO Operation Mode a n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/500khz) Limit (dbm/500khz) Verdict CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS ac (VHT40) ac (VHT80) CH PASS Note: N/A (Not Applicable) TRF No.: FCC /A Page 73 of 166 Report No.: ES E2 Ver.1.0

74 Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: 3 Mode: SISO Operation Mode a n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/500khz) Limit (dbm/500khz) Verdict CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS ac (VHT40) ac (VHT80) CH PASS Note: N/A (Not Applicable) Frequency Band III ( MHz) Temperature : 28 Test Date : December 1, 2015 Humidity : 65 % Test By: King Kong Antenna: Mode: MIMO Operation Mode n (HT20) n (HT40) ac (VHT20) Channel Number Channel Frequency (MHz) Measurement Level (dbm/500khz) Limit (dbm/500khz) Verdict CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS CH PASS ac (VHT40) ac (VHT80) CH PASS Note: N/A (Not Applicable) TRF No.: FCC /A Page 74 of 166 Report No.: ES E2 Ver.1.0

75 Antenna a Frequency Band I ( MHz) Access to the World Channel36 : 5180MHz a Frequency Band I ( MHz) Channel44 : 5220MHz TRF No.: FCC /A Page 75 of 166 Report No.: ES E2 Ver.1.0

76 802.11a Frequency Band I ( MHz) Channel48 : 5240MHz TRF No.: FCC /A Page 76 of 166 Report No.: ES E2 Ver.1.0

77 802.11n(HT20) Frequency Band I ( MHz) Channel36 : 5180MHz n(HT20) Frequency Band I ( MHz) Channel44 : 5220MHz TRF No.: FCC /A Page 77 of 166 Report No.: ES E2 Ver.1.0

78 802.11n(HT20) Frequency Band I ( MHz) Channel48 : 5240MHz TRF No.: FCC /A Page 78 of 166 Report No.: ES E2 Ver.1.0

79 802.11ac(VHT20) Frequency Band I ( MHz) Channel36 : 5180MHz ac(VHT20) Frequency Band I ( MHz) Channel44 : 5220MHz TRF No.: FCC /A Page 79 of 166 Report No.: ES E2 Ver.1.0

80 802.11ac(VHT20) Frequency Band I ( MHz) Channel48 : 5240MHz TRF No.: FCC /A Page 80 of 166 Report No.: ES E2 Ver.1.0

81 802.11n(HT40) Frequency Band I ( MHz) Channel38 : 5190MHz n(HT40) Frequency Band I ( MHz) Channel46 : 5230MHz TRF No.: FCC /A Page 81 of 166 Report No.: ES E2 Ver.1.0

82 802.11ac(VHT40) Frequency Band I ( MHz) Channel38 : 5190MHz ac(VHT40) Frequency Band I ( MHz) Channel46 : 5230MHz TRF No.: FCC /A Page 82 of 166 Report No.: ES E2 Ver.1.0

83 802.11ac(VHT80) Frequency Band I ( MHz) Channel42 : 5210MHz TRF No.: FCC /A Page 83 of 166 Report No.: ES E2 Ver.1.0

84 802.11a Frequency Band III ( MHz) Channel 149: 5745MHz a Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 84 of 166 Report No.: ES E2 Ver.1.0

85 802.11a Frequency Band III ( MHz) Channel 165: 5825MHz TRF No.: FCC /A Page 85 of 166 Report No.: ES E2 Ver.1.0

86 802.11n(HT20) Frequency Band III ( MHz) Channel 149: 5745MHz n(HT20) Frequency Band III ( MHz) Channel 157: 5785MHz TRF No.: FCC /A Page 86 of 166 Report No.: ES E2 Ver.1.0