Metering products family

Transcription

1 Technical Data TD E Eective February 2012 Metering products amily

2 General description Eaton s metering products provide solutions needed to monitor and manage all aspects o an electrical distribution system. When greater reliability, increased productivity, and signiicant cost savings are called or to remain competitive in today s market, Eaton s metering products it the bill. These innovative meters and communications systems, along with Power Xpert Sotware, make it possible to successully take control o the electrical distribution system. Power Xpert Meters Power Xpert Meters are the benchmark or intelligent Web-enabled top-quality metering devices or the power system. Power Xpert Meters provide measurement o the critical elements ound in the power system whether that be voltage, power, current, transients, harmonics, or even time. Power Xpert Meters provide Web-enabled communications or use with the Power Xpert sotware. All Power Xpert Meters provide a standard communications protocol or easy integration into other systems. Greater reliability Eaton s metering products give the ability to receive an early warning o potential problems, eliminate unnecessary trips, isolate aults to ensure minimum downtime, and shed or equalize loads while a problem is being corrected. Increased productivity Equipment downtime resulting rom voltage or requency variations can be very costly to an operation. Monitoring power quality with Eaton s metering products throughout the electrical distribution system provides data to identiy, isolate, and correct problems quickly and eiciently. Reduced energy and operating costs When we think about meters and power quality, the common thread throughout the basket o solutions is inormation. Collecting, monitoring, and managing data rom the electrical distribution system can help reduce costs or those acilities prepared to deine and analyze present electrical energy usage levels and patterns. Data provided by Eaton s metering products comprise the data or veriying utility bills or energy management and lowering operating costs. Deregulation in some geographical locations permits energy users to select a utility provider and negotiate rate structures. For large users with heavy utility bills, this may be an incentive to veriy the utility bill, identiy an opportunity or savings, negotiate a better utility rate, and apply the savings directly to the bottom-line. Users are also empowered to decrease energy consumption, thereby lowering peak demand charges and decreasing operating costs. When an Eaton meter is used with Eaton trip units and relays incorporating built-in metering capabilities, the entire electrical distribution system can be cost-eectively managed. Eaton is an industry leader oering a complete integrated solution to oversee your entire electrical distribution system. As a global manuacturer o low and medium voltage electrical distribution system equipment and components, Eaton is an experienced innovator o metering products that incorporate leading-edge technology. These innovations result rom our scientiic and engineering expertise, physical resources, and the ongoing R&D programs at our technology centers.

3 Technical Data TD E Eective February 2012 Table 1. Metering Selection ChartDimensions in Inches (mm) Power Xpert 4000/6000/8000 Power Xpert 2000 Metering products amily a Under typical operating conditions. b PXM 2260 only. c PXM 2270 only. d IQ 260 only. e Individual values reported to 85th harmonic; anti-alias iltering prevents higher requencies rom distorting readings (see IEC ). At computer only. g The auxiliary voltage option adds three additional voltage input channels to Power Xpert meters. h Dimensions in mm = H x W x D. i Dimensions in mm = H x W x 63.2 D. j Using < 10 VA meter sourced 24V power. k From 3 300% o FS. l At unity power actory and 5 300% o FS. m At a power actor <±0.5 and 5 300% o FS. n Relays programmable to operate on any measured unction. o Optional. p An IPONI is required q Dimensions in mm = H x 90.2 W x D. r IQ Power Sentinel only. s Dimensions in mm = 96.0 H x 96.0 W x 46.7 D. t IQ 140 and IQ 150. BK IQ 150 only. BL F-Frame: 1.30 (33.0) H x 4.12 (104.6) W x 3.20 (81.3) D J-Frame: 1.28 (32.5) H x 4.12 (104.6) W x 4.04 (102.6) D K-Frame: 1.25 (31.8) H x 5.31 (134.9) W x 4.04 (102.6) D Universal: 3.00 (76.2) H x 5.31 (134.9) W x 4.36 (110.7) D BM PXM 6000 only BN PXM 8000 only BO PXM 2280 only BP PXM 2290 only BQ IQ 250S only Legend Auxiliary voltage (Optional) PG = Programmable FS = Full Scale RV = Read Value = Provides three additional voltage inputs to the meter: Va2, Vb2, Vc2. Interharmonics = Power Xpert 6000/8000 supported. Note: Technical data or the DP-4000 and the IQ 230 can be ound at eaton.com/meters. Device Name Electrical Parameters Amperes Current range (% o nominal) Watts VARS VA PFapparent PFdisplacement THDvoltage THDcurrent Watthours Varhours VAhours Amperedemand Wattdemand VARdemand VAdemand Revenue accuracy Individual ampere harmonics Individual voltage harmonics 0.1% o reading % FS 0.05% o reading % FS A (400%) 0.1% o reading % FS 0.1% o reading % FS 0.1% o reading % FS 0.1% 0.1% ± 0.01 Hz 127th 127th a a a 0.05% o reading % FS a a a a 85th e 85th e Interharmonics BM BN Minimum and/or Maximum Values Current Power Power actor THD Demand values Trend analysis Event logging Disturbance recording Other Features, VAUX L-L A, B, C, N, G Apparent/displacement Amperes/volts (, AUX L-L) 2/4 BM/8GB BN 2/4 BM/8GB BN 2/4 BM/8GB BN 60 cycles per event 0.1% o reading 0.1% o reading ± 0.03 Hz 40th bc BO BP 40th bc BO BP ± 0.1% per ANSI C class ANSI C12.20 (0.2%) 40th c BO BP 40th c BO BP A, B, C, N Apparent Amperes/volts bc BO BP 256/512 b/768 c BO BP MB 100,000 alarms/events with timestamp 768 MB, up to 64 cycles per event BO BP Storage 2/4 BM/8GB BN 256/512 b/768 c BO BP MB standard PG output relays PG analog outputs Discrete contact inputs Analog inputs 5 maximum 8 Optional (2) orm C, 5A or (4) orm A, 120 ma Optional (4) 4 20 ma or (4) 0 1 ma Optional (2) or (4) Synchinput kw utility Via status input Via end o interval pulse with optional digital inputs Auxiliary voltage g kwh pulse initiator Waveorm display Waveorm capture, samples/cycle distribution display Display type Display lines/character Display character height Communications Local/computer, 512 LCD Graphic (320 x 240 pixels) 0.22 (5.5) H x 0.16 (4.0) W Serial: Modbus RTU, Modbus ASCII Network: Modbus TCP, Ethernet TCP/IP, HTTP, SNMP, SMTP, FTP, up to 64 BO, up to 512 BP Serial: Modbus RTU, Modbus ASCII, DNP 3.0 Network: Modbus TCP, BACnet/IP, Ethernet TCP/IP, HTTP, HTTPS, SNMP, SMTP, Waveorm FTP BO BP Setup coniguration Via Web browser/display Via Web browser/display Dimensions Operating temperature range Reerence literature Meter: 8.82 H x 8.22 W x 6.72 D h Display: 9.02 H x 7.80 W x 2.49 D i C display unit, C meter base unit j TD E 4.85 (123.2) H x 4.85 (123.2) W x 4.97 (126.2) D C TD E eaton corporation

4 IQ 250/260 Series IQ 100 Series IQ 35M Series Device Name Electrical Parameters Amperes Current range (% o nominal) 0.1% o reading 0.1% o reading ± 0.25% o reading ± 0.25% o reading 0.4% % per C deviation rom 25 C 0.4% (5-100%), 0.8%(1-5%) % per C rom 25 C 1 120% Watts VARS VA 0.5% o reading BT 0.5% o reading BT 0.5% o reading BT 2.0% per IEC Class 2 Calculated: vector sum o Watts and VARs PFapparent PFdisplacement ± 0.03 Hz 0.5% o reading BT ± 0.03% Hz BT Calculated: Watts / VAs ±0.02 Hz THDvoltage THDcurrent Watthours 40th d 40th d ± 0.5% per ANSI C class BK Varhours VAhours Amperedemand ± 0.1% per ANSI C class ± 0.5% per ANSI C class BK ± 0.5% per ANSI C class BK ±2.0% per IEC Class 0.5S Wattdemand VARdemand VAdemand 2.0% per IEC Class 2 Calculated: vector sum o Watts and VARs Revenue accuracy Individual ampere harmonics Individual voltage harmonics ANSI C12.20 (0.2%) ANSI C12.20 (0.5%) Interharmonics Minimum and/or Maximum Values Current Power Power actor THD Demand values Trend analysis Event logging Disturbance recording Other Features Storage PG output relays PG analog outputs Discrete contact inputs Analog inputs Synchinput kw utility A, B, C Apparent Amperes/volts d 128 KB o 128 KB or logging, up to 8 parameters every 15 minutes or 30 days Optional (2) orm C, 5A or (4) orm A, 120 ma Optional (4) 4 20 ma or (4) 0 1 ma Optional (2) or (4) Via end o interval pulse with optional digital inputs A, B, C Apparent BT BT Ampere/ BT Apparent (Low Alert) (Out o Range Alert) kw, kvar, kva; Maximum kw, kvar, kva Logging on demand interval or Modbus command o 10 registers (16 bit) by 5760 entries ea (115 kb) o 2 pulse inputs with BACnet optional demand synchronization via modbus Auxiliary voltage g kwh pulse initiator Waveorm display Waveorm capture, samples/cycle distribution display o Display type Display lines/character Display character height Backlit LCD 2 lines by 5 characters ea (ull alphanumeric top row) 7.5mm Communications Serial: Modbus RTU, Modbus ASCII, DNP 3.0 Network: Modbus TCP via Power Xpert Gateway Serial: Modbus RTU, Modbus ASCII o Network: Modbus TCP o Serial: Modbus RTU o, BACnet MS/TP o Network: Modbus TCP via Power Xpert Gateway Setup coniguration Via coniguration sotware/display Via coniguration sotware/display Via display/coniguration sotware Dimensions 4.85 (123.2) H x 4.85 (123.2) W x 4.97 (126.2) D 4.85 (123.2) H x 4.85 (123.2) W x 4.97 (126.2) D 3.60 (91) H x 4.2 (107) W x 2.3 (59) D Operating temperature range C C Meter: 30 to 70 C, Display: 10 to 50 C Reerence literature TD E TD E TD E

5 Technical Data TD E Eective February 2012 Metering products amily IQ 150S/250S Series IQ Analyzer 6000 Series IQ Multipoint Energy Submeter II IQ Energy/Power Sentinel Device Name Electrical Parameters Amperes Current range (% o nominal) 0.1% o reading 0.1% o reading ± 0.2% FS k ± 0.2% FS k 3 800% ± 0.5% FS ± 0.5% FS r ± 0.5% FS r Watts VARS VA 0.4% FS, ± reading l 0.4% FS, ± reading m 0.4% FS, ± reading l r r PFapparent PFdisplacement ± 0.03 Hz 0.8% FS k 0.8% FS k 0.04% k or 0.01 Hz ± 2.0% FS r ± 2.0% FS r ± 0.1% FS r THDvoltage THDcurrent Watthours 0.5% reading l ± 1.0% Per ANSI C12 Varhours VAhours Amperedemand ± 0.1% per ANSI C class 1% reading m 0.5% reading l ± 0.2% FS k Wattdemand VARdemand VAdemand ± 0.4% FS k ± 0.4% FS k ± 0.4% FS k ± 1.0% Per ANSI C12 Revenue accuracy Individual ampere harmonics Individual voltage harmonics ANSI C12.20 (0.2%) ANSI C12.20 (0.5%) ANSI C12.1 (1%) Interharmonics Minimum and/or Maximum Values Current Power Power actor THD Demand values Trend analysis Event logging Disturbance recording Other Features A, B, C Apparent 2 MB BQ 2 MB BQ A, B, C, N, G Apparent/displacement Amperes/volts All Time/date 504 events w/timestamp 10 waveorm events Storage 2 MB BQ 90 kb PG output relays PG analog outputs Discrete contact inputs Analog inputs (4) 10A orm C n (4) 0 10/4 20 ma (3) +30 Vdc dierential (1) 0 20/4 20 ma Synchinput kw utility At device or via communications o Via communications only Via communications only Auxiliary voltage g kwh pulse initiator Waveorm display Waveorm capture, samples/cycle distribution display Local o/computer, 128 Local o/computer Display type Display lines/character Display character height Graphic LCD with LED backlight 7 lines, 147 characters Up to 7 lines Communications Serial: Modbus RTU, Modbus ASCII, DNP 3.0 Network: Modbus TCP, wired or wireless Serial: INCOM p Network: via Power Xpert Gateway p Serial: INCOM Network: via Power Xpert Gateway Serial: INCOM Network: via Power Xpert Gateway Setup coniguration Via coniguration sotware/display Via coniguration sotware/display Via coniguration sotware Via coniguration sotware Dimensions 7.90 (200.7) H x 7.5 (190.5) W x 43.1 (78.7) D (261.6) H x 6.70 (170.2) W x 5.40 (137.2) D 7.94 (201.7) H x (301.5) W x 1.49 (37.8) D BL Operating temperature range C C C C Reerence literature TD E TD1702BTE TD17C02TE TD1707TE eaton corporation

6 Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH United States 877-ETN-CARE ( ) Eaton.com 2012 Eaton Corporation All Rights Reserved Printed in USA Publication No. TD E / TN February 2012 Eaton and Power Xpert are registered trademarks o Eaton Corporation. All other trademarks are property o their respective owners.