Certificate of Compliance

Transcription

1 Certificate of Compliance Certificate: Master Contract: Project: Date Issued: April 24, 2014 Issued to: Power-One, Inc 3201 E Harbour Dr Phoenix, AZ USA The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Issued by: Rob Hempstock Rob Hempstock, AScT. PRODUCTS CLASS CLASS POWER SUPPLIES - Distributed Generation Power Systems Equipment - POWER SUPPLIES - Distributed Generation - Power Systems Equipment - Certified to U.S. Standards Transformerless Utility Interactive Inverter, models TRIO-27.6-TL-OUTD-x-US-480, TRIO-27.6-TL-OUTDx-US-480-A, TRIO-27.6-TL-OUTD-US-480-W, TRIO-20.0-TL-OUTD-x-US-480, TRIO-20.0-TL-OUTD-x- US-480-A, and TRIO-20.0-TL-OUTD-US-480-W, where x is "S" or "S1"or "S1A", or "S1B", provided with two DC input channels, 3-phase output (4W-Wye or 3W-Delta configuration), permanently connected. Notes: For details related to rating, size, configuration, etc., reference should be made to the CSA Certification Record, Attachment 1 Ratings for Certificate of Compliance, or the Descriptive Report. APPLICABLE REQUIREMENTS CSA C22.2 No General Use Power Supplies *UL Std. No nd Edition - Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources (January 28, 2010) UL CRD - Non-Isolated EPS Interactive PV Inverters Rated Less Than 30kVA DQD 507 Rev Page: 1

2 Certificate: Master Contract: Project: Date Issued: April 24, 2014 UL 1699B - Outline of Investigation for Photovoltaic (PV) DC Arc-Fault Circuit Protection (Issue Number 2, January 14, 2013) CSA TIL M-07 - Interim Certification Requirements for Photovoltaic (PV) DC Arc Fault Protection (Issue Number 1, March 11, 2013) *Note: Conformity to UL 1741-Second Edition (January 28, 2010) includes compliance with applicable requirements of IEEE 1547 and IEEE DQD 507 Rev Page: 2

3 Page 1 of 6 CSA Ref. No ( ) Transformerless Utility Interactive Inverter, models TRIO-27.6-TL-OUTD-x-US-480, TRIO-27.6-TL- OUTD-x-US-480-A, TRIO-27.6-TL-OUTD-US-480-W, TRIO-20.0-TL-OUTD-x-US-480, TRIO TL-OUTD-x-US-480-A, and TRIO-20.0-TL-OUTD-US-480-W where x is "S" or "S1"or "S1A", or "S1B", provided with two DC input channels, 3-phase output (4W-Wye or 3W-Delta configuration), permanently connected. Model TRIO-27.6-TL-OUTD-x-US-480, TRIO-27.6-TL-OUTD-x-US-480-A TRIO-27.6-TL-OUTD-US-480-W Maximum Input Voltage (DC) 1000 V dc 1000 V dc Range of Input Operating Voltage V dc, 715 V dc nominal V dc, 715 V dc nominal (DC) Range of Input Operating Voltage V dc V dc (DC) at Full Power Maximum Input Current (DC) 30.9 A (Each Input - 2 provided) 61.8 A Maximum Input Short Circuit Current 36 A (Each Input - 2 provided) 72 A (DC) Maximum Utility Backfeed Current 0 A 0 A (AC) Output Power Factor Rating >0.995 >0.995 Operating Voltage Range (AC) 422 to 528 V ac 422 to 528 V ac Operating Frequency Range (HZ) Hz (Default) Hz (Default) Field Adjustable Operating Frequency Hz, Hz Hz, Hz Range (HZ) Number of Phases 3 3 Nominal Output Voltage (AC) 480 V ac 480 V ac Normal Output Frequency 60 Hz 60 Hz Continuous Output Current (AC) 36 A 36 A Maximum Output Power (AC) (See W W Note 3) Maximum Continuous Output Power W W +45 C ambient (See Note 3) Maximum Output Fault Current and (See Note ) (See Note ) Duration Maximum Output Overcurrent 50 A 50 A Protection Utility Interconnection and Voltage See Note See Note and Frequency Trip Limits and Trip Times Trip Limit and Trip Time Accuracy Voltage: +/- 2% Frequency: +/ Hz Time: +/- 100ms Voltage: +/- 2% Frequency: +/ Hz Time: +/- 100ms Normal Operation Temperature Range -30 C to +60 C -30 C to +60 C Output Power Temperature Derating and Maximum Full Power Operating Ambient (See Note 4) (See Note 4) (See Note 4) (See Note 4) Enclosure Rating Type 4X 4X

4 Page 2 of 6 CSA Ref. No ( ) Model TRIO-20.0-TL-OUTD-x-US-480, TRIO-20.0-TL-OUTD-x-US-480-A TRIO-20.0-TL-OUTD-US-480-W Maximum Input Voltage (DC) 1000 V dc 1000 V dc Range of Input Operating Voltage V dc, 700 V dc nominal V dc, 700 V dc nominal (DC) Range of Input Operating Voltage V dc V dc (DC) at Full Power Maximum Input Current (DC) 25 A (Each Input - 2 provided) 50 A Maximum Input Short Circuit Current 30 A (Each Input - 2 provided) 60 A (DC) Maximum Utility Backfeed Current 0 A 0 A (AC) Output Power Factor Rating >0.995 >0.995 Operating Voltage Range (AC) 422 to 528 V ac 422 to 528 V ac Operating Frequency Range (HZ) Hz (Default) Hz (Default) Field Adjustable Operating Frequency Hz, Hz Hz, Hz Range (HZ) Number of Phases 3 3 Nominal Output Voltage (AC) 480 V ac 480 V ac Normal Output Frequency 60 Hz 60 Hz Continuous Output Current (AC) 27 A 27 A Maximum Output Power (AC) (See W W Note 3) Maximum Continuous Output Power W W +45 C ambient (See Note 3) Maximum Output Fault Current and (See Note ) (See Note ) Duration Maximum Output Overcurrent 40 A 40 A Protection Utility Interconnection and Voltage See Note See Note and Frequency Trip Limits and Trip Times Trip Limit and Trip Time Accuracy Voltage: +/- 2% Frequency: +/ Hz Time: +/- 100ms Voltage: +/- 2% Frequency: +/ Hz Time: +/- 100ms Normal Operation Temperature Range -30 C to +60 C -30 C to +60 C Output Power Temperature Derating and Maximum Full Power Operating Ambient (See Note 4) (See Note 4) (See Note 4) (See Note 4) Enclosure Rating Type 4X 4X

5 Page 3 of 6 CSA Ref. No ( ) Utility interactive evaluations were conducted with firmware versions: Device Device Version Device Checksum Rev Number DSP Booster A AD8DDEE3AA7819D4A481BA3CBE1F4B Rev. Number DSP Inverter B.1.B.3 471E9F6B4AA5721D449B97951ECF7C0 Rev. Number MICRO Microprocessor C A1BC41C3D965627E72E3745AC1FE431 Alternate Firmware Version Device Device Version Device Checksum DSP Booster A.0.8.D 7C675D7876BC3283D0AAFE4FE5EC364 DSP Inverter B ED1B92DF18B8C5A4EC30E0C42B58B4D MICRO Microprocessor C B7E60C152F716BA2B228ECA51EEA1 MICRO Communication Board E.1.0.A 9AD1D943C2EFB69FC72E27B1203E9DF0 ARCFAULT-Module-27.6 Device Device Version Device Checksum DSP Arc Detector B xC9C1B118 Notes: 1. Models TRIO-27.6-TL-OUTD-x-US-480, TRIO-27.6-TL-OUTD-x-US-480-A, TRIO-20.0-TL- OUTD-x-US-480 and TRIO-20.0-TL-OUTD-x-US-480-A are permanently connected, 3-phase, utility-interactive inverters intended for operation with Photovoltaic supplies only. 2. Models TRIO-27.6-TL-OUTD-US-480-W and TRIO-20.0-TL-OUTD-US-480-W are intended for operation with an AC Generated supply only (i.e. wind or hydro); this inverter is intended to receive an input supply from a certified interface module (rectified controller which converts AC voltage from an AC generator into a regulated DC voltage). 3. The above models are intended to be used in an ungrounded power system in conjunction with the requirements specified in the National Electrical Code, ANSI/NFPA 70, 2011 Ed, section

6 Page 4 of 6 CSA Ref. No ( ) 4. Maximum output power can be delivered for TRIO-27.6-TL-OUTD-x-US-480 series with an input voltage range of V dc. Power Derating Curves over Temperature range -30 to +60 C for model TRIO-27.6-TL-OUTDx-US-480 series: Volts -30C +40C +45C +50C +60C 180Vdc W W W W 8722 W 345Vdc W W W W W 520Vdc W W W W W 715Vdc W W W W W 850Vdc W W W W W 950Vdc 5998 W 5964 W 5960 W 5769 W 5456 W

7 Page 5 of 6 CSA Ref. No ( ) Maximum output power can be delivered for TRIO-20.0-TL-OUTD-US-480 series with an input voltage range of V dc. Power Derating Curves over Temperature range -30 to +60 C for model TRIO-20.0-TL-OUTD-US-480 series: Volts -30C +40C +45C +50C +60C 185Vdc 9195 W 9043 W 9049 W 9030 W 7820 W 315Vdc W W W W W 455Vdc W W W W W 710Vdc W W W W W 850Vdc W W W W W 950Vdc 5675 W 5514 W 5493 W 5275 W 4857 W 5. Maximum Output Fault Current and Duration: Models TRIO-27.6-TL-OUTD-US- 480 series Models TRIO-20.0-TL-OUTD-US- 480 series Output Voltage Fault Current RMS 1 cycle Fault Current RMS 3 cycles Fault Current PK (A) Total Overall Duration (msec) Output Voltage Fault Current RMS 1 cycle Fault Current RMS 3 cycles Fault Current PK (A) Total Overall Duration (msec)

8 Page 6 of 6 CSA Ref. No ( ) 6. Utility Interconnection and Voltage and Frequency Trip Limits and Trip Times: Condition A B Simulated utility source Maximum time (sec) at 60 Frequency (Hz) Voltage (V) Hz before cessation of current to the simulated utility < 0.50 V nor Rated (60 Hz) 0.16 (Fixed) (Fixed) Rated (60 Hz) 2 (Default) (Adj. Set Points 0.16 to 5s) 0.50 V nor V < 0.88 V nor (Adjustable Set Points 55% to 88%) C 1.10 V nor < V < 1.20 V nor (*) (Adj. Set Points 110% to 115%) Rated (60 Hz) 1 (Default) (Adj. Set Points 0.16 to 5s) D (*)1.20 V nor V Rated (60 Hz) 0.16 (Fixed) (Fixed) E Rated f > 60.5 Hz (Default) (Adj to 63.0 Hz) F Rated f < 59.3 Hz (Default) (Adj to 57.0 Hz) G Rated f < 57.0 Hz 0.16 (Fixed) H Rated f > 63.0 Hz 0.16 (Fixed) 0.16 (Default) (Adj to 300 sec) 0.16 (Default) (Adj to 300 sec) (*) Note: Max. High Voltage Level and Very High Voltage Level is 115% V nor 7. All models meet the surge requirements of IEEE C , Location Category B (6kV). Tests were performed using ring wave and combination waveforms, both polarities, for common mode and differential mode coupling, 20 pulses each test. After surge testing the units were operational with control functionally verified by frequency and voltage disconnect tests. 8. Models with -A suffix are provided with PV DC ARC-Fault Circuit Protection for series arcing faults.