OPTOTRONIC LED Power Supply OTi 85W G2 Programmable Technical Specifications
|
|
- Shawn Griffith
- 5 years ago
- Views:
Transcription
1 OPTOTRONIC LED Power Supply Electrical Specifications Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz) Hz (+/- 10%) 120V 277V Input Current (A) Full load <10% <20% Power Full load >0.9 >0.9 Full load 87% 89% Inrush Current (Apk, T@50% of Apk) 37.4A, 150µs 84.7A, 160µs General Information Type Constant Current, Class2 Output Power 85W (Max.) Programming Tool & 51647/51648 Software Download Output Current Dimming Level Dim-to-off, Soft start Programmable Features LED thermal protection Auxiliary output voltage Constant lumen output End-of-life indicator Environmental Specifications Ambient Operating Temperature -40ºC to 55ºC Case Temperature (Tc) 85ºC (50kHrs) 1 90ºC max. (30kHrs) Max. Storage Temp. 70ºC Max. Relative Humidity (%) 85% non-condensing Transient Protection NEMA SSL (2.5kV) ANSI C (6kV) 2 EFT IEC , Level 3 UL Rating Dry & Damp UL File number E EMI Compliance FCC Part 15 Class A Sound Rating Class A 1 Warranty applicable only at 85ºC 2 6kV transient protection for high-bay (HB) models 3 Default AUX voltage is 12V Output Output Current (ma) mA (1mA step) Output Voltage (VDC) 10-55VDC Output Ripple Current 2300mA Max. Output Power (W) 85W LED Power-Up Time <1sec Load Regulation <3% Line Regulation <3% Over Voltage Protection Yes, non-latching Over Load Protection Yes, non-latching Output Short-Circuit Protection Yes, non-latching Over Temperature Protection Foldback to 50ºC at 105ºC Dimming Dimming Control 0 10V (Isolated) Dimming Range %, 1-100% Dimming Type Current Reduction Dimming Input Isolation 2.5kV Source/Sink Current 0.2mA max Dim-to-Off Threshold 0.8V Standby Power 2.9W(120V); 2.5W(277V) Auxiliary Output (For AUX models only) Output Voltage (VDC) 12/20/24V 3 (configurable) Output Current (ma) 40 Voltage Regulation ±10% LED thermal protection (NTC) NTC Value Active Range Temperature Derating Start 25kΩ User defined
2 Ordering Guide NAED Ordering Description NAED Ordering Description OTi 85/ /2A3 DIM-1 L OTi 85/ /2A3 DIM-1 L HB OTi 85/ /2A3 DIM-1 L AUX OTi 85/ /2A3 DIM-1 L HB AUX OTi 85/ /2A3 DIM L OTi 85/ /2A3 DIM L HB OTi 85/ /2A3 DIM L AUX OTi 85/ /2A3 DIM L HB AUX HB refers to highbay models that have 6kV transient protection Wiring Diagram Note: The Vaux Out (YELLOW) and DGND (BLUE) will provide the DC Auxiliary output. Yellow is +ve polarity and DGND is -ve polarity. Note: Maximum suggested remote mounting distance is 16 feet. Key Application Notes Dim-to-off and Soft Start are programmable (enable/disable) features. The default mode for both features is disabled for out-of-thebox products. If these features are required, they must be enabled in the programming software. Mechanical Diagram Mechanical Specification Length Width Height Mounting Length 6.73 (425mm) 1.15 (29.4mm) 1.0 (25.4mm) (415mm)
3 % of Output Current Outpu Voltage (V) Operating Range Output Current (ma) PF>0.9 and THD Note: meeting DLC requirements requires minimum 50% loading. Dimming Curve Dimming Voltage (V) 10% Dimming 1% Dimming
4 Power Factor THD (%) THD vs. Input Voltage (Full Load) Input Voltage (VAC) Power Factor vs. Input Voltage (Full Load) Input Voltage (VAC)
5 Efficiency (%) Efficiency (%) Efficiency vs. Output Voltage V Output Voltage (V) 277V Output Voltage (V)
6 Power Factor Power Factor Power Factor vs Load Power Factor vs Output Power (120V) Output Power (W) Power Factor vs Output Power (277V) Output Power (W)
7 THD (%) THD (%) THD vs Load THD vs Output Power (120V) Output Power (W) THD vs Output Power (277V) Output Power (W)
8 % Of Output Current LED Thermal Protection (NTC) Characteristic The LED thermal protection feature of the OTi 85W helps reduce the temperature of the LED module by reducing the output current in case of abnormal temperature conditions. To use this feature a third party NTC thermistor should be connected to the LED power supply as shown in the wiring diagram below. In the end application, care must be taken to place the NTC thermistor close to the hottest spot on the LED module. If LED thermal protection is not required the NTC port on the LED power supply connector can be left open. Vishay, EPCOS, Murata, Panasonic are some of the manufacturers of NTC thermistor. EPCOS part number for reference only B57164K153J 25 C). Murata part number for reference only - NCP03XH223J05RL 25 C). Derating start = 6.3kΩ; Derating end = 4.3kΩ; Min output level = 10% R NTC in kω To learn more about this feature, please refer to the technical application guide for LED Thermal Protection (ECS304). Constant lumen Maintenance The Constant Lumen Maintenance feature of the OTi 85W helps to maintain the required lumen output of the fixture at a constant level throughout its lifetime. In general LED s lumen output will depreciate over time and in order to maintain sufficient light level towards the end of lifetime, the LED s are driven at high current initially and will result in more energy consumption. The constant lumen maintenance will give the flexibility to drive the LEDs at optimal driving current throughout its lifetime. This helps in energy savings, constant light output and enhanced reliability of the system. Note: A detailed step-by-step instructions are outlined in the Help section of the OT Programmer software
9 End-of-Life Indicator The End-of-Life indicator helps the end user to receive a signal from the fixture indicating that it has reached its programmed life-time. After the LED driver reaches the programmed life-time, whenever it is turned ON, it stays at Dim level (10%) for 10 minutes and reaches its appropriate level. Dimmer/Sensor Compatibility Manufacturer OSRAM Encelium EMS Leviton Lutron Wattstopper Wattstopper Wattstopper Enlighted Inc. Synergy Lighting Controls Part Number ZBHA-CLM DIM (NAED: 45678) EN-CLM-PIR-DD-ZB (NAED: 58286) EN-LCM-1R10V-GB2-BK EN-LCM-1R10V-GB2-BK/DR EN-ALC-1R10V-GB2-BK EN-ALC-1R10V-GB2-BK-DR IP710-DLX DVTV-XX ADF FD-301 FSP-202 SU-3E-00 (Enlighted Compact Sensor) ISD BC Note: The absence of a dimmer from this chart does not necessarily imply incompatibility. Please reference the dimmer manufacturer s instructions for installation. Warranty OPTOTRONIC products are covered by our LED Module, OPTOTRONIC Power Supply or Control Warranty. For additional details, refer to the latest version of the warranty (LED395) available at OSRAM SYLVANIA Inc. 200 Ballardvale Street Wilmington, MA USA ds.info@osram.com ECS308 OSRAM and OPTOTRONIC are registered trademarks of OSRAM GmbH. Specifications subject to change without notice OSRAM SYLVANIA Inc
OPTOTRONIC LED Power Supply OTi 50W Programmable - Technical Specifications
w ww.osram.us/optotronic OPTOTRONIC LED Power Supply OTi 50W Programmable - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz) 50 60 Hz
More informationOPTOTRONIC LED Power Supply OTi 20W Programmable - Technical Specifications
www.osram.us/ds OPTOTRONIC LED Power Supply OTi 20W Programmable - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz) 50 60 Hz (+/- 10%)
More informationOPTOTRONIC LED Power Supply OTi 48W Programmable - Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply OTi 48W Programmable - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 347V (+/- 10%) Frequency Range (Hz) 50 60 Hz (+/-
More informationOPTOTRONIC LED Power Supply OTi 50W Programmable - Technical Specifications
www.osram-americas.com/optotronic OPTOTRONIC LED Power Supply OTi 50W Programmable - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 347V (+/- 10%) Frequency Range (Hz) 50
More informationOPTOTRONIC LED Power Supply OTi 30W Programmable - Technical Specifications
www.osram-americas.com/optotronic OPTOTRONIC LED Power Supply OTi 3W Programmable - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 12V-277V (+/- 1%) Frequency Range (Hz) 5
More informationOPTOTRONIC LED Driver OTi25W Compact Gen2 Programmable Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Driver OTi25W Compact Gen2 Programmable Technical Specifications Electrical Specifications Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz) 50 60
More informationOPTOTRONIC LED Power Supply OTi 20W Programmable - Technical Specifications
www.osram-americas.com/optotronic OPTOTRONIC LED Power Supply OTi 20W Programmable - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz)
More informationOPTOTRONIC LED Power Supply OTi 85W DEXAL TM Programmable Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply Electrical Specifications Input General Information Item Number 57432 Type Constant Current, Class2 Output Power 85W (Max.) Programming Tool 51645 &
More informationOPTOTRONIC LED Power Supply OTi100W/UNV/1600C/2DIM+/P6/AUX - Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply OTi100W/UNV/1600C/2DIM+/P6/AUX - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz)
More informationOPTOTRONIC LED Power Supply OTi 50W DEXAL TM Programmable - Technical Specifications
w ww.osram.us/optotronic OPTOTRONIC LED Power Supply OTi 50W DEXAL TM Programmable - Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 120V-277V (+/- 10%) Frequency Range (Hz)
More informationOPTOTRONIC LED Power Supply OT40W Programmable - Technical Specifications
www.osramamericas.com/optotronic OPTOTRONIC LED Power Supply OT40W Programmable - Technical Specifications GENERAL INFORMATION Item Number(s) Type Output Power Programming tool Software 79441 (1 %, J-type)
More informationOPTOTRONIC Power Supply OT20W UNV Phase Cut Series Technical Specifications
1 www.osram-americas.com/optotronic OPTOTRONIC Power Supply OT20W UNV Phase Cut Series Technical Specifications ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 120V- 277V (±10%) Frequency Range (Hz)
More informationPRELIMINARY. S050W-054C1400-L03-UN-D2 50W Programmable Driver. Electrical Specifications. Protections. Environmental Specifications.
Rev 2-23-217 Electrical Specifications Maximum Power: 5W Typical Efficiency: 87% Input Voltage Range: 12-277 Vac ± 1% Frequency: Power Factor: Inrush Current: Input Current (Max): 5/6 Hz >.9 @ 8-1% load,
More informationSAMSUNG ELECTRO-MECHANICS CO., LTD
Model Name : Features : ㅡ Suitable for LED lighting application ㅡ UL8750, UL1310 Class 2 ㅡ For use in Dry and Damp Location ㅡ Full-protection provided: OCP/OVP/OTP/SCP ㅡ 0-10V Dimming Control ㅡ IP67 ㅡ
More informationOutdoor. PISE-A150D (Pb-Free) 150W Output Power with DALI. Features. Critical Specifications. Input Specifications. Output Specifications IP66
PISE-A150D (Pb-Free) 150W Output Power with DALI 125V - 280V / 0.35A - 0.7A / 150W Features Dimming Method : 1-10 Dim, DALI, Schedule Dimmer Input Cable : Double or Reinforced Insulation Mechanical Outline
More informationLCM-40DA/AUX Series 40W Multiple-Stage Constant Current LED Power Supply
Features Constant Current mode output with multiple levels selectable by dip switch Plastic housing with class II design Built-in active PFC function Standby Power consumption
More informationMax. Input Power (W) Input Current. Inrush. 120 Vin. Dimming Method. Trailing edged. Enclosure
Outpu t Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/5%-µs) THD @ Max Load (%) Power Factor @ Max Load
More information3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)
FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W
More informationMax. Input Power (W) Input Current (Arms) / 100 <12% Dimming. 0-10V Analog Class 2 Wiring Only. Enclosure
Product Overview Input Voltage (Vac) Max Output Power (W) Output Voltage Range (V) Output Current (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush
More informationLED Driver. Xitanium. 300W V A Programmable Specifications. Enclosure. Wiring Diagram
LED Driver Xitanium 300W 120-277V 0.10-1.50A Programmable 929000712703 Long-lasting and low maintenance, LED-based light sources are an excellent solution for all lighting applications. For optimal performance,
More informationEcoSystem 5-Series LED Driver 15 W to 75 W
EcoSystem 5-Series LED Driver W to 75 W 369823d 1 11.17.14 EcoSystem 5-Series LED drivers provide a high performance solution for any space, in any application, while providing smooth, continuous dimming
More informationMax. Output Power. Efficiency (2) 350 ma 249 ~ 528 Vac 107~214Vdc 75 W 87.0% ESC-075S035DT(ST)
ESC075SxxxDT(ST) Features High Efficiency (Up to 87%) Active Power Factor Correction (0.95 Typical) Constant Current Output 010V Dimming Control Input Surge Protection: 4kV lineline, 6kV lineearth AllAround
More informationLED Driver. CertaDrive. 41W 0.87A 46V 0-10V (5% dim) V CI041C087V046CNN1. Specifications. Enclosure. Wiring Diagram
LED Driver CertaDrive 41W 0.87A 46V 0-10V (5% dim) 120-277V CI041C087V046CNN1 Philips Advance CertaDrive indoor LED drivers are designed to meet basic lighting needs. These dimmable drivers are offered
More informationLED Driver. Xitanium. 75W 0.1-2A 54V 0-10V INT (1% dim) with SimpleSet XI075C200V054DSM1 (bottom entry) XI075C200V054DSM5 (side entry) Specifications
LED Driver Xitanium 75W 0.1-2A 54V 0-10V INT (1% dim) with SimpleSet XI075C200V054DSM1 (bottom entry) XI075C200V054DSM5 (side entry) The Philips Advance Xitanium range of downlight LED drivers is designed
More informationLED Driver. Xitanium 42W A 52V LE+TE INT XI042C080V052RNP1. Specifications. Wiring Diagram. Enclosure
LED Driver Xitanium 42W 0.5-0.8A 52V LE+TE INT XI042C080V052RNP1 Specifications Input Voltage (Vrms) Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max. Load and 70 C Case The Philips
More informationInput. Max. Input Power (W) (Arms) 120 V 277V 86% 88% / /83. Dimming Method. Enclosure
Outp ut Pow er (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @
More informationDim. Method Isolated 0-10V, Schedule. Parameter Min. Typ. Max. Unit Remark. Nominal Input Frequency 47 50/60 63 Hz -
PIFN-W050C Programmable 50W LED Driver (Compatible NFC) 20V - 52V / 0.4A 1.4A / 50W Features Mechanical Outline (Metal Case) Active Power Factor Correction - 335(L) 29.8(W) 25.8(H)mm Constant Current Control
More informationDESCRIPTION KEY FEATURES PROGRAMMING FEATURES KEY PERFORMANCE DATA MESO 50W LED DRIVER SERIES
DESCRIPTION Meso 50W is a programmable LED Driver that combines smart technology and high flexibility features at a competitive cost. A single channel, constant current LED ballast, Meso 50W is designed
More informationGeneral. Efficiency Isolation. Dimensions Net Weight. Safety & EMC
10KV Lightning Surge Protection Smart Over-Temperature Protection Universal AC Input up to 305Vac High Efficiency (Up to 92%) Active Power Factor Correction Constant Current With Dimming Options Waterproof
More informationOutput Voltage Range(3) Max. Output Power
Features DimtoOff with Standby Power 0.5 W AlwaysOn Auxiliary Power: 12 Vdc, 200 ma Thermal Sensing and Protection for LED Module Full Power at 50% 100% Max. Current (Constant Power) FlickerFree Dimmable
More informationFeatures. Description. Models Adjustable Output Current Range. EUD-600SxxxDT. 600W Programmable IP67 Driver
EUD600SxxxDT Features Ultra High Efficiency (Up to 95.0%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module 010V/PWM/Timer Dimmable (3 Timer Modes)
More informationOutput Voltage Range(3) Max. Output Power
LUD040SxxxDSF Features DimtoOff with Standby Power 0.5 W AlwaysOn Auxiliary Power: 12 Vdc, 200 ma Thermal Sensing and Protection for LED Module Full Power at 50% 100% Max Current (Constant Power) FlickerFree
More informationPower Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes
Features Trailing Edge AC Dimmable Constant Current Output High Efficiency (Up to 86%) Active Power Factor Correction (Up to 0.95) All-Around Protection: OVP, SCP and OLP Description The series operates
More informationFeatures. Models Output Current Range. LUD-060SxxxDSF. 60W Programmable IP20 Driver. Dim-to-off with Standby Power 0.5 W
LUD060SxxxDSF Features Dimtooff with Standby Power 0.5 W AlwaysOn Auxiliary Power: 12Vdc, 200mA Thermal Sensing and Protection for LED Module Full Power at 70100% Max Current (Constant Power) FlickerFree
More informationDESCRIPTION KEY FEATURES MODEL CODING AND OUTPUT RATINGS PROGRAMMABLE 50W LED DRIVER MESO 50W
DESCRIPTION The LED drivers are designed to generate one constant current output from an AC input, and work with most industry standard lighting controls in dimming applications. Optional Remote Gear and
More informationOutput Power. Output Voltage
n Features Supply Voltage: 180-528Vac or 250-740Vdc Great Surge Immunity 10kV 100,000Hour Life @ Tc=75 7 Year Warranty @ Tc
More informationLDP Series - 240W Outdoor Programmable Driver
Product Features Universal input voltage / Full range: 90~305Vac; Constant power design, outputs programmable; Output current reconfigurable by infrared controller; 3-in-1 dimmable (M types): 0~10Vdc /
More informationMax. Input Power (W) Input. (Arms) 120V 230V 277V. 120 Vin * 230 Vin 277 Vin / / / 116.
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max
More informationEDC Series - 105W Outdoor Programmable Driver
Product Features Input voltage range: 180~305Vac; Constant power design, outputs programmable; Output current reconfigurable by infrared controller; 3-in-1 dimmable (M types): 0~10Vdc / PWM signal / Timer
More informationAC - DC 150W LED Driver MDC150 Single Output Series
Features Built-in 10KV lightning surge protection (EN61000-4-5) 90 ~ 305Vac full range input; Active PFC Output voltage range up to 58Vdc for outdoor lighting Aluminum case IP65/ IP67 waterproof Dual mode
More informationOutput Voltage Range. Max. Output Power
V.9/18 EUD480SxxxDT Features Ultra High Efficiency (Up to 95%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module 010V/PWM/Timer Dimmable (3 Timer Modes,
More informationAC - DC 120~150W LED Driver MDC120 Single Output Series
Features Built-in 10KV lightning surge protection (EN61000-4-5) 90 ~ 305Vac full range input; Active PFC Output voltage range up to 430Vdc for outdoor lighting Aluminum case IP65/ IP67 waterproof Dual
More informationLDP Series - 75W Outdoor Programmable Driver
LDP Series - 75W Outdoor Programmable Driver Product Features Universal input voltage / Full range: 90~305Vac; Constant power design, outputs programmable; Output current reconfigurable by infrared controller;
More informationTypical Efficiency (2)
EUC030SxxxDTM Features Low THD, 10% Max up to 240 Vac Compact Metal Case with Excellent Thermal Performance Isolated 010V Dimmable Input Surge Protection: 4kV lineline, 6kV lineearth High Reliability &
More informationAC - DC 96W LED Driver MDC100 Single Output Series
AC - DC LED Driver Features Built-in 10KV lightning surge protection (EN61000-4-5) 90 ~ 305Vac full range input; Active PFC Output voltage range up to 58Vdc for outdoor lighting Aluminum case IP65/ IP67
More informationEfficiency higher than 85% Power Factor >92% Case TC* Protection Storage Humidity
Features L.T.F. LED Driver - DS Series 40W DC Class 2 & Non Class 2 Supply 90-305V Efficiency higher than 85% Factor >92% Case TC* Protection Storage Humidity UL8750, EN61347, UL1310, UL48, cul, CE, TUV,
More informationInput. Max. Input Power (W) (Arms) 230 V 277 V. 120 Vin 50/ 160. Dimming Method. 1-10V Isolated DALI 1 ~ 254
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max
More informationTypical Efficiency (1) 350 ma 90 ~ 305 Vac 60~120Vdc 42 W 90.0% LUC-042S035DTG(STG)(2)
Features High Efficiency (Up to 90%) Active Power Factor Correction (Typical 0.95) Constant Output Current IP54(Potted) Dimming Control (010V) AllAround Protection: OVP,SCP, OTP Class 2 Output Unique Package
More informationOutput Voltage Range(3) Max. Output Power
Features DimtoOff with Standby Power 0.5 W AlwaysOn Auxiliary Power: 12 Vdc, 200 ma Thermal Sensing and Protection for LED Module Full Power at 50% 100% Max Current (Constant Power) FlickerFree Dimmable
More informationOutput Voltage Range. Max. Output Power
Features Ultra High Efficiency (Up to 93.0%) Full Power at Wide Output Current Range (Constant Power) 05V/010V/PWM/Timer Dimmable Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection:
More informationFeatures. Description. Models Adjustable Output Current Range. 200W Programmable IP67 Driver. EUD-200SxxxDTA
EUD200SxxxDTA Features Ultra High Efficiency (Up to 94.5%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module 010V/PWM/Timer Dimmable (3 Timer Modes
More informationOutput Voltage Range ma ma 700 ma 176~305 Vac 160~357 Vdc 250W 93% 0.98 EBD-255S105DV
Features Ultra High Efficiency (Up to 93%) Full Power at Wide Output Current Range (Constant Power) Compact Package Design 0-5V/0-10V/PWM/Timer Dimmable Input surge protection: 6 kv line-line, 10 kv line-earth
More informationLCM-40DA series. 40W Multiple-Stage Constant Current Mode LED Driver AUX. IS 15885(Part 2/Sec13) R File Name:LCM-40DA-SPEC S&E
THOMAS SAMUEL THOMAS SAMUEL 0W Multiple-Stage Constant Current Mode LED Driver S&E IS 5885(Part /Sec) R-07766 ~ AUX SPECIFICATI MODEL OUTPUT CURRENT LEVEL RATED POWER 0W Multiple-Stage Constant Current
More informationMax. Output Power. Efficiency (2) 350 ma 90~305 Vac 14~29 Vdc 10 W 80% 0.94 LUC-010S035DSM(SSM)
LUC010SxxxDSM(SSM) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllAround Protection: OLP, SCP and Open Lamp Protection
More informationPower Factor (2) Typical Efficiency (2) 350 ma 90 ~ 305 Vac 36~72 Vdc 25 W 86 % 0.94 LUC-024S035DSP(SSP) (3)
LUC024SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllAround Protection: OVP, SCP and Open Lamp Protection
More informationAC - DC 96W LED Driver MDC100 Single Output Series
Features Built-in 10KV lightning surge protection (EN61000-4-5) 90 ~ 305Vac full range input; Active PFC Output voltage range up to 58Vdc for outdoor lighting Aluminum case IP65/ IP67 waterproof Dual mode
More informationFeatures. Description. Models Adjustable Output Current Range. 320W Programmable IP67 Driver. EUD-320SxxxDT
EUD320SxxxDT Features Ultra High Efficiency (Up to 94%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module 010V/PWM/Timer Dimmable (3 Timer Modes) DimtoOff
More informationFeatures. Description. Models Adjustable Output Current Range. 600W Programmable IP67 Driver. ESD-600SxxxDT
ESD600SxxxDT Features Ultra High Efficiency (Up to 95.0%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module 010V/PWM/Timer Dimmable (3 Timer Modes)
More informationOutput Voltage Range. Max. Output Power
EUD096SxxxDT Features High Efficiency (Up to 91%) Full Power at 50100% Max Current (Constant Power) 010V/PWM/Timer Dimmable and DimtoOff Standby Power 1 W Input Surge Protection: 4kV lineline, 6kV lineearth
More informationOT FIT 15/ /500 LT2 LP
www.osram.com Preliminary OT FIT 15/220-240/500 LT2 LP SELV Constant current LED driver Wide operating area up to 500mA The reliable component when LEDset flexibility, small dimensions and low ripple are
More informationElectrical Specifications. Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max
More informationOutput Voltage Range. Max. Output Power
EUG075SxxxDT Features High Efficiency (Up to 91.0%) Full Power at Wide Output Current Range (Constant Power) 05V/010V/PWM/Timer Dimmable Input Surge Protection: 6 kv lineline, 10 kv lineearth AllAround
More informationTypical Efficiency (2) Max. Output Power. 152~304Vdc 320 W 94.0% EUC-320S105DT(ST) 114~228Vdc 320 W 94.0% EUC-320S140DT(ST)
EUC320SxxxDT(ST) Features Ultra High Efficiency (Up to 94%) Constant Current Output 010V Dimmable and Dim off Standby Power 1.5 W AllAround Protection: OVP, SCP, OTP Suitable for UL Dry / Damp / Wet Location
More informationEnvironmental. Electrical Specifications at 25 O C TYPE HL. Output Constant Current. Output Voltage Range
Model: Series Drive Mode: Constant Current or Constant Voltage : 40W Max. Input Voltage: 347 to 480VAC, 50/60 Hz Number of Outputs: One Output Voltages: 3VDC - 130VDC Output Currents: 300mA - 4450mA Optional
More informationOutput Voltage Range. Max. Output Power
EUG096SxxxDT Features Ultra High Efficiency (Up to 93.0%) Full Power at Wide Output Current Range (Constant Power) 05V/010V/PWM/Timer Dimmable Input Surge Protection: 6kV lineline, 10kV lineearth AllAround
More informationMax. Input Power (W) Input. (Arms) 230 V. 120 Vin 277 V 40/ 150. Dimming Method. 1-10V Isolated
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max
More informationLumen Output (3500K) Lumen Efficiency (3500K)
SS LED Square Round APPLICATION The LED slim strip light series are more efficient and compact. The LED technology used illuminates a crisper brightness while saving more energy to that of the traditional
More informationTypical Efficiency (2) 22~36 Vdc 25 W 84% LUC-024S070DSW(SSW) (3) 15~24 Vdc 25 W 83% LUC-024S105DSW(SSW) (3)
LUC024SxxxDSW(SSW) Features High Efficiency (Up to 85%) Active Power Factor Correction (Typical 0.95) Cascade Connection Adjustable Constant Output Current with Dip Switch 010V Dimmable AllAround Protection:
More informationStrip lights, Landscape lights, Bay lights, Street lights, Tunnel lights, Flood lights. Output Voltage. Output Power
n Features Supply Voltage: 90-305Vac or 127-420Vdc Great Surge Immunity 10kV PWM Output Frequency >1kHz 100,000Hour Life @ Tc=75 7 Year Warranty @ Tc
More informationOutput Current Min. Output Voltage
Features Power Rating: 320W Input Voltage: 90-305Vac Constant current design Output current settable(1050ma-4200ma) +/-2% Output Current Accuracy (Programmable Model) Near Field Communication Programmability
More informationMax. Output Power. Typical Efficiency (2) 500 ma 90 ~ 305 Vac 60 ~ 120 Vdc 60 W 90.0% EUC-060S070STM0004
EUC060SxxxSTM000x Features Low THD, 10% Max up to 240 Vac Compact Metal Case with Excellent Thermal Performance Input Surge Protection: 4kV lineline, 6kV lineearth High Reliability & Long Lifetime: 85,800
More informationMax. Output Power. Typical Efficiency (1) 350 ma 90 ~ 305 Vac 121~243Vdc 85 W 91% EUC-085S035DT(ST)(4)
EUC085SxxxDT(ST) Features High Efficiency (Up to 91%) Active Power Factor Correction (0.99 Typical) Constant Current Output 010V Dimming Control Input surge protection: 4kV lineline, 6kV lineearth AllAround
More information50W Programmable Driver with Dip- switch
Product DataSheet Rev.0.0 2018. 01.23 1# LED Driver 50W Programmable Driver with Dip- switch SI-CU1625001US (UL Class P) SI-CU1625002US (UL Type TL) Constant Current LED Driver Deep Dimming up to 1% Features
More informationEnvironmental. Electrical Specifications at 25 O C E Output Constant Current
LED Optimized Drivers 40 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH Model: Environmental 40W Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : 40W
More informationMax. Output Power. Typical Efficiency (2) 700 ma 90~305 Vac 54~108 Vdc 75 W 90% EUC-075S070DD(SD) Parameter Min. Typ. Max.
Features High Efficiency (Up to 90%) Active Power Factor Correction (0.99 Typical) Constant Current Output 0-10V Dimming Control Input Surge Protection: 6kV line-line All-Around Protection: SCP, OTP, OVP
More informationOutput Voltage Range mA mA 1400 ma 249~528Vac 107~305Vdc 320 W 94.0% ESD-320S150DT
ESD320SxxxDT Features Ultra High Efficiency (Up to 94.5%) Full Power at 70100% Max Current (Constant Power) 010V/PWM/Timer Dimmable (3 Timer Modes) DimtoOff with Standby Power 1.5W Output Lumen Compensation
More informationLCM-40DA series. 40W Multiple-Stage Constant Current Mode LED Driver AUX. File Name:LCM-40DA-SPEC
~ AUX SPECIFICATI MODEL OUTPUT CURRENT LEVEL RATED POWER 0W Multiple-Stage Constant Current Mode LED Driver DC VOLTAGE RANGE OPEN CIRCUIT VOLTAGE (max.) CURRENT TOLERANCE SETUP TIME VOLTAGE RANGE Note.
More informationOutput Voltage Range (V) PF-P250CC-C105-S(U)-ND 90 ~ ,0 UL CE ENEC CB
Description 305Vac -Around Protection: OVP/OTP/SHORT 0-10V/PWM/Resistor/Time 4 in 1 Dimmable Programmable Output Current with Constant Wattage Design ning Protection 6kV for 4 Hours @Ta=45 Thermal Optimized
More informationFeatures. Description. Models Adjustable Output Current Range. 320W Programmable IP67 Driver. ESD-320SxxxDT
ESD320SxxxDT Features Ultra High Efficiency (Up to 94.5%) Full Power at Wide Output Current Range (Constant Power) 010V/PWM/Timer Dimmable (3 Timer Modes) DimtoOff with Standby Power 1.5W Output Lumen
More informationEfficiency higher than 85% Power Factor >95% Case TC* Protec on
LED Driver - DS Series 50W DC Class 2 Supply DS50W Aluminum Case Series 100-277V FEATURES UL8750, EN61347, UL1310, UL48, cul, CE, TUV, KAMA, CQC compliant FCC Part 15/18 Class B and EN55015 compliant Meet
More informationTypical Efficiency (2) Power Factor (2)
LUC018SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllAround Protection: OVP, SCP and Open Lamp Protection
More informationPerfectly match each project s needs
Outdoor LED driver 40 W Perfectly match each project s needs Philips introduced an additional 40 W driver in the Programmable LED driver category. The main features of this driver, compared to the already
More informationOutput Voltage Range. Max. Output Power
V.9/18 EUD480SxxxDV Features Ultra High Efficiency (Up to 95%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module 010V/PWM/Timer Dimmable (3 Timer Modes,
More informationEnvironmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current
LED Optimized Drivers 40 Watt - Model: Environmental 40W Drive Mode: Constant Current or Constant Voltage : 40W Max. Input Voltage: 90 to 305VAC, 47-63Hz Number of Outputs: One Output Voltages: 3VDC -
More informationOutput Voltage Range mA mA 700 ma 249~528 Vac 64~214Vdc 96 W 90.5% ESD-096S090DT
ESD096SxxxDT Features High Efficiency (Up to 90.5%) Full Power at 50100% Max Current (Constant Power) 010V/PWM/Timer Dimmable (3 Timer Modes) DimtoOff with Standby Power 1.5 W Output Lumen Compensation
More informationFeatures : 36V. Can be adjusted by internal potentiometer A type only 6 ~ 10A 4.0 ~ 6.7A 3 ~ 5A ±2.0% ±0.5%
Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function Protections: Short circuit / Over current / Over voltage / Over temperature OCP point adjustable through output cable
More informationHEC-30/35LTA-33TDAA Rev A
A. Features High Efficiency (Up to 86%). Active Power Factor Correction (Typical 0.95). Isolation Class II All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated metal case with IP20 and dry location. 1-10V,
More informationOutput Voltage Range. Max. Output Power
HUK150SxxxDT Features Inventronics patented metal case (Patent NO.: 201730183070.X) High Efficiency (Up to 93.0%) Full Power at Wide Output Current Range (Constant Power) 010V/10V PWM Dimmable Input Surge
More information35W Multiple-Stage Constant Current Mode LED Driver LCM-40UDA series
~ AUX SPECIFICATI MODEL OUTPUT INPUT OTHERS NOTE LCM-0UDA- Current level selectable via DIP switch, please refer to DIP SWITCH TABLE section CURRENT LEVEL 50mA 500mA 600mA 700mA(default) 900mA 050mA RATED
More informationElectrical Specifications. Enclosure
Status Active Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power
More informationTypical Efficiency (2)
LUC042SxxxDSW(SSW) Rev. B 42W Constant Current IP20 Driver Features High Efficiency (Up to ) Active Power Factor Correction (Typical 0.95) Cascade Connection Adjustable Constant Output Current with Dip
More informationEnvironmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current
LED Optimized Drivers 40 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH Model: Environmental 40W Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : 40W
More informationANP105 Series - 277V. Features and Applications: Single Class 2 Output, Ballast Size, CV / CC Mode, Dimmable LED Driver. General Specifications INPUT
CV / CC Mode, Dimmable LED Driver Features and Applications: One Class 2 DC Output - 1W / 75W / 6W / W / 25W Active Power Factor Correction 1W / 75W / 6W: Silicone Encapsulated For Outdoor Wet and Indoor
More informationLED Driver. CertaDrive 18W 0.39A 46V V CI018C039V046FNN1M. Specifications. Enclosure. Wiring Diagram. Input and output use lead- wires.
LED Driver CertaDrive 18W 0.39A 46V 120-277V CI018C039V046FNN1M Philips Advance CertaDrive indoor LED drivers are designed to meet basic lighting needs. These drivers are offered with specific voltage-current
More informationOutput Voltage Range. Max. Output Power
EBS160SxxxDTE Features Ultra High Efficiency (Up to 94%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module 010V/PWM/Timer Dimmable (3 Timer Modes )
More informationLoad (KV) (Kg) Rating /280 Load Damp
Output Output Output Efficiency Max Case Input Max Input Inrush THD @ Power Surge Weight Envir. Power Voltage Current at Max Load Temp Current Power Current Max Load Factor Protection Protection (W) (V)
More informationFeatures : IP65 IP67 SELV
F 110 SELV Features : H LG-24 0 H se ri es Universal AC input / Full range (up to 305VAC) Built-in active PFC function Protections: Short circuit / Over current / Over voltage / Over temperature Cooling
More informationConstant current LED Drivers For outdoor use
FEATURES: Constant current output Input voltage range: 90-305Vac Short circuit, over current, over voltage and over temperature protections Designed to worldwide safety standards for lighting Active power
More informationPower Factor (1) Efficiency (1) Parameter Min. Typ. Max. Notes A Measured at full load and 100 Vac input
LUC018SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllRound Protection: OVP, SCP and Open Lamp Protection
More informationTypical Efficiency (2) Max. Output Power
LUC052SxxxDSF Features High Efficiency (Up to 86.5%) Constant Current Output 010V Dimmable with High Accuracy 5% Minimum Dimming Level Low Ripple AllAround Protection: OVP, SCP, OTP Class 2 & SELV Output
More information