ANP105 Series - 277V. Features and Applications: Single Class 2 Output, Ballast Size, CV / CC Mode, Dimmable LED Driver. General Specifications INPUT

Transcription

1 CV / CC Mode, Dimmable LED Driver Features and Applications: One Class 2 DC Output - 1W / 75W / 6W / W / 25W Active Power Factor Correction 1W / 75W / 6W: Silicone Encapsulated For Outdoor Wet and Indoor Damp and Dry Locations - IP67 W / 25W: Indoor Usage - IP2 Case Material - SECC Built-in EMI Filter For Low Noise Over-Current and Over-Voltage Protection with Auto-Recovery Dimmable Output in Both CV and CC Mode Match the Conventional Ballast Dimension All specifications are typical at nominal input, full load, at 25 C unless otherwise stated. Electrical Specifications General Specifications INPUT Weight TBD Input Voltage Range 9-35Vac (Rated 1-277Vac) Input Frequency 47-63Hz Input Current max. 1.5A@115Vac/6Hz,full load Inrush Current load cold start Leakage Current.5mA max. Power Factor.9 at full load, entire input range THD 8% load, 277Vac OUTPUT Output Regulation 5% (V for CV, I for CC mode) Efficiency See Table Page 2 Over Voltage Protection <13% nominal voltage Short Circuit Protection Shutdown & Auto Recovery OTP Protection 1 or 2-Stage Protection (See Page 4 & 5 for Details) Start-up Time < 3 sec. Dimming Control - 1Vdc (1V for max. output) Safety Certifications UL UL879 (In SAM) UL875, UL131 (Class 2) E File#: E32888, E3712 1W/75W/6W: Wet Location Warranty Info / MTBF Contact Amperor for detailed warranty and MTBF information Dimension 211mm x 41.4mm x 3mm 8.31 x 1.63 x 1.18 Environmental Specifications Min. Operating Temp. -3 Tambient Max. Operating Temp. 85 Tcase Thermal Protection Output Drops to 5%@Tcase 85C (if appliied, see page 5) Output Tcase 95C Thermal Protection Output Tcase 85C Storage Temp. - C to +85 C Relative Humidity 1% to 95% ( non-condensing ) Enclosure Sealed per 1W / 75W / 6W - IP67 W / 25W - IP2 Cooling Conduction RoHS Compliant RoHS EMC / Safety Conducted Emissions EN5515,FCC part 15 level B Radiated Emissions EN5515,FCC part 15 level B Surge EN61-4-5, Level 4, Criteria B (L&N/PE: 4KV, L/N: 2KV)

2 Order Information Table1: ANP15-XXP1-277-WWW-UU Model vs. Output Specifications Notes: Model Max. Output Voltage (V) Rated Output Current (A) Output Voltage Range (V) Max. Output Power (W) Min. Efficiency (115Vac input 1% load) ANP15-35P ~ % ANP15-24P ~ % ANP15-24P ~ % ANP15-42P ~ % ANP15-24P ~ % ANP15-12P ~ % ANP15-56P ~ % ANP15-P ~ 88.% ANP15-3P ~ 3 88.% ANP15-24P ~ % ANP15-24P ~ % How to Order with the Full Model Name - ANP15-XXP1-277-WWW-UU: ANP15 - Amperor s Identification Name for this Driver Family XX - Replaced by the Max. Output Voltage of the Driver. Ranging from 12 to 56. P1 - This Driver does not Equipped with Output Voltage and Current Adjustment Knots Rated AC Input Voltage: 1Vac - 277Vac WWW - Replaced by the Max. Output Power of the Driver. Ranging from 25 to 1. UU - Replaced by Dimming Options: -VD: with CV mode Dimming, -CD: with CC mode Dimming, -VN: CV mode output without Dimming, -CN: CC mode output without Dimming, Examples: ANP15-24P VD: Max. 24V / 1W output, with CV mode dimmer built-in. ANP15-12P CN: 5A / 6W, CC mode output, w/o dimming function built-in.

3 Output Voltage Vout Max. Constant Current / Constant Voltage Operation Green Line: Constant Current Operation Line Vout Min. 1% Rated Output Current Output Current Red Line and Gray Area: Constant Voltage Operation Area 1. If the current draw from the load is equal to the rated output current of the driver, the driver will operate in CC mode. (on the Green Line above) 2. If the current draw from the load is less than the rated output current of the driver, the driver will operate in CV mode. When working with the CV mode LED light tube / module / strip, the driver operates on the Red Line above. Please contact Amperor for detailed explanation. Derating Curve - Output Current vs. Input Voltage 12 Load (%) vs. Input AC Voltage 1 Load (%) Input AC Voltage

4 OTP Operation in CC mode (both CD and CN options) - 1W / 75W Output Current (%) Case Temperature (oc) Note: The min. temperature the driver can operate in is -3C (Ambient Temperature) OTP Operation in CV mode (only VD option) - 1W / 75W PWM (%) applied to the output Case Temperature (oc) Note: The min. temperature the driver can operate in is -3C (Ambient Temperature) All other models that are not listed above, is using the OTP scheme - the output will shut-down at Tcase = 85C. See page 5 for the full list.

5 Model Name vs. OTP Scheme Type Model OTP Type ANP15-35P CD ANP15-35P CN ANP15-35P VD ANP15-35P VN, Note 1 ANP15-24P CD ANP15-24P CN ANP15-24P VD ANP15-24P VN, Note 1 ANP15-24P CD ANP15-24P CN ANP15-24P VD ANP15-24P VN, Note 1 ANP15-42P CD ANP15-42P CN ANP15-42P VD ANP15-42P VN ANP15-24P CD ANP15-24P CN ANP15-24P VD ANP15-24P VN ANP15-12P CD ANP15-12P CN Model ANP15-12P VD ANP15-12P VN ANP15-56P CD ANP15-56P CN ANP15-56P VD ANP15-56P VN ANP15-P CD ANP15-P CN ANP15-P VD ANP15-P VN ANP15-3P CD ANP15-3P CN ANP15-3P VD ANP15-3P VN ANP15-24P CD ANP15-24P CN ANP15-24P VD ANP15-24P VN ANP15-24P CD ANP15-24P CN ANP15-24P VD ANP15-24P VN OTP Type Note 1: The 1st OTP is achieved by limiting the output current to 5% of the max. load. Suggested De-rating Curve for Models with OTP Scheme 1% Output Load (%) 5% Ambient Temp. (oc)

6 Constant Current Output Dimming Curve Output Current % Dimming Voltage (Vdc) Constant Voltage Output Dimming Curve Output Voltage % 1% 9% 8% 7% 6% 5% % 3% 2% 1% Dimming Voltage (Vdc) %

7 1W / 75W / 6W Mechanical Drawing W / 25W Mechanical Drawing