WCRWG Status Report:

Size: px

Start display at page:

Download "WCRWG Status Report:"

Bryce Morris
5 years ago
Views:

1 WCRWG Report: and Updates since last report. 1. The ZU9DMR repeater at Bottelary is online 2. The MHz repeater at George is offline due to low battery voltage and a damaged 11kv line to the high site. Donations received since last report. 1. A cash donation was received from Chris Gozzard ZS1CDG. 2. It has been 0.0 weeks since the last donation was reported. General requirements: upgrade and maintenance program 1. Cash donations 2. High quality N type male and female connectors for ½ heliax 3. VHF and UHF ferrite circulators.

2 Scheduled repeater usage Please be aware of the following scheduled use of the specified repeaters and, except for emergency traffic, kindly keep them clear for these activities. Times are given in SAST. USE USER AFFECTED REPEATERS FROM TO ON NOTES Bulletin ZS1F Hawequa Mondays Amateur Radio Newsline Bulletin HWC Kanonkop Wednesdays Except the first Wednesday of each month Piketberg Link system partitioned at Brenton on Sea Hanskop Hawequa, Hanskop isolated Onrusberg Jonaskop Riversdal George Bulletin ZS1OAK Constantiaberg Thursdays Oakdale Club weekly bulletin Bulletin BARK Piketberg Sundays Link system partitioned at Brenton on Sea Hawequa Hanskop Hanskop Onrusberg Jonaskop Riversdal George Bulletin CTARC Kanonkop Sundays SARL bulletin followed by club bulletin. Link Hanskop system partitioned at Jonaskop Hanskop Onrusberg Jonaskop Bulletin ZS1AAZ Kanonkop Sundays Amateur Radio Today

3 Repeater Information and Repeater status is usually one of DOWN, or Testing Bottelary Frequencies and Tones Output: / Input: (ZU9DBI_C) D*STAR (6K0F7W GMSK) Site specific requirements Set RPT1 as ZU9DBI_C, RPT2 as ZU9DBI_G replace _ with space. Internet ZU9DBI_G gateway The repeater has a 3 minute transmit timer with an approximate 30 second lockout penalty. This is a factory setting in the controller. Users are advised to set a transmit timeout in their radios of less than 3 minutes Hanskop (Sir Lowry s Pass) Frequencies and Tones Output: (88.5) / Input: (88.5) Site specific requirements Link to Jonaskop/ operational. DTMF codes are published on the WCRWG website Piketberg Frequencies and Tones Output: (88.5) / Input: (88.5) Site specific requirements 1. Link to Hawequas/ operational DTMF codes are published on the WCRWG website

4 Hawequas (Du Toitskloof Pass) Frequencies and Tones Output: (88.5) / Input: (88.5) Big power spikes and outages reported. Audio problem from controller to VHF repeater. No CTCSS output as a result of commercial breakthrough. External temperature sensor faulty. Site specific requirements 1. Link to Hanskop/ operational 2. Link to Piketberg/ operational DTMF codes are published on the WCRWG website Riversdale Frequencies and Tones Output: / Input: Site specific requirements 1. Link to Jonaskop/ operational 2. Link to George/ operational Jonaskop (Villiersdorp) Frequencies and Tones Output: (88.5) / Input: (88.5) Site specific requirements 1. Link to Hanskop/ operational. 2. Link to Riversdale/ operational DTMF codes are published on the WCRWG website

5 Constantiaberg Frequencies and Tones Output: (88.5) / Input: (88.5) Site specific requirements Antenna upgrade being planned George DOWN Frequencies and Tones Output: / Input: Site specific requirements Linked via MHz repeater at Dana Bay DTMF codes are published on the WCRWG website Hermanus (Onrusberg) Frequencies and Tones Output: / Input: Site specific requirements Link to Hanskop Kanonkop (Tygerberg) Frequencies and Tones Output: (88.5) / Input: Site specific requirements

6 Hanskop (Sir Lowry s Pass) Frequencies and Tones Output: / Input: Site specific requirements 1. Link to Hawequas/ operational Change of frequency from / necessitated by interference Kanonkop (Tygerberg) Frequencies and Tones Output: (88.5) / Input: IRLP/Echolink currently disabled pending computer repairs. Site specific requirements 1. IRLP node Echolink node (ZU9DCM R), using EchoIRLP modification. Dial out to other Echolink nodes requires the use of a dial prefix, currently *0 (star zero), as it is an addon to IRLP. The disconnect code for a call is '73' use this for both Echolink and IRLP calls Dana Bay Frequencies and Tones Output: / Input: Site specific requirements 1. Linked to George, Riversdale Bottelary Frequencies and Tones Output: / Input: DMR (7K60FXD/E 4FSK) 2 D*STAR (6K0F7W GMSK) 3 Yaesu System Fusion (11K2F7W C4FM) Site specific requirements For D*STAR, set RPT1 as ZU9DMR_B, RPT2 as ZU9DMR_G replace _ character with a space. Internet ZU9DMR_G gateway The repeater will autodetect modes as long as no other mode is operational.

7 Helderberg Frequencies and Tones Output: / Input: DMR (7K60FXD/E 4FSK) Site specific requirements Lightning strike, tower needs maintenance.

8 ZS0DCC Helderberg Digipeater Frequencies and Tones Output: / Input: Digital FM N (11K0F2D) AFSK Site specific requirements ZS1TWO 2 Meter Beacon (Lower Burg St) Frequencies and Tones CW Site specific requirements 20W into a 5 element beam antenna pointing around 50 degrees (NE) ZS1SIX 6 Meter Beacon (CPUT) Frequencies and Tones FSK Site specific requirements

9 Send fault reports via e mail to: wc repeater fault@googlegroups.com To receive the weekly report direct via e mail, subscribe to: wc repeater announcements@googlegroups.com. You can subscribe by sending an e mail message to wc repeater announcements+subscribe@googlegroups.com. The WCRWG has a new website packed full of information on all the repeaters and detailed reports of activities. You can access this website via the link Account Information Account Name: Western Cape Repeater Working Group (WCRWG) Bank: FNB Account type: Cheque Account number: Branch code: (Electronic payments) Branch code: (Counter deposits)

New Tech - Operating Beric K6BEZ

New Tech - Operating Beric K6BEZ Sponsored by Start with Repeater Operation What is a Repeater? Station usually in a high location Repeats what it hears so others can hear Why start there? Greatly increases