GCS Lighting Guide LED Lighting & Control
|
|
- Lewis Sullivan
- 5 years ago
- Views:
Transcription
1 Lighting uide LED Lighting & Control Schematics & Configurations by ordon Cable Stay For Models and eneral Purpose Projects
2 Lighting uide LED Lighting & Control Introduction Put the finishing touches on your bridge, layout, diorama, C machine, or any hobby project using our fun lighting kits and accessories. makes it easy by matching our LEDs, resistors and power supplies, taking the guesswork out of your lighting project. Add our multichannel dimmer and control the exact brightness needed for all your lighting features such as: collision avoidance, architectural, bridge deck illumination, lighted automobiles, structure interior/exterior, street lights and more. Or enjoy our multicolor LEDs and produce almost unlimited color variations. Our LED lighting products are compatible with any DCC LED lighting controller, and are configured to run up to 18 volts DC. lighting kits include simple schematics and installation instructions that demystify this revolutionary technology. e sure to visit ordoncablestay.com for tips and techniques regarding kit assembly, painting and LED lighting kit installation. Lighting Options Collision Avoidance Lights Pole Mount Deck Lights Lighted Automobiles Center Tower Deck Lights Flood Lights Lower Deck Lights Architectural Lighting Collision Avoidance Lights Add the beauty and realism that only LED lighting can provide Control six or more channels
3 Table of Contents Introduction...2 Lighting Features... 2 The Light Emitting Diode... 4 The Series Circuit...5 Preparing the LED...5 Attaching LEDs & Wiring...5 Lighting Configurations...6 Top ed Collision Avoidance...6 Top ed Collision Avoidance and Top White Deck Lighting...6 Top ed Collision Avoidance and Top White Under eam Deck Light...7 Top ed and elow Deck ed Collision Avoidance...7 elow Deck ed Collision Avoidance...8 A Series Deck Sconce Lighting (blue or white)...8 Series Center Deck Lighting (blue or white)...9 Series Suspension Lighting (blue or white)...9 White & lue Flood Lighting...10 Multicolor Configurations...11 A Series Deck Sconce...12 Series Center Deck...12 Series Suspension...13 Multicolor Flood...13 Pole Mount and Automobiles...14 Pole Mount Single Head Cool White...14 Pole Mount Double Head Cool White...14 Lighted Automobiles...14 Power Supply and Controller Configurations...15 Kit Compatibility A Arch Suspension Tower Suspension Version 3.0 Copyright ordon Cable Stay All ights eserved.
4 The Light Emitting Diode Epoxy Lens & Case Anvil or Flag Flange Sizes Used in this uide 13/64 or 5.16mm hole 5mm 1/8 hole 3mm 3/32 hole 1.8 mm 2.4 mm 3.4 mm Mini Standard Most commonly used here Important Never connect an LED directly to a power supply as this will permanently damage the diode. Always place a resistor in front of the LED. Never use hot glue with LEDs. esistor Power Supply 1218VDC Do not use high temp soldering iron. Use fine tip iron around 250 degrees. Do not solder close to the diode. Version 3.0 Copyright ordon Cable Stay All ights eserved.
5 The Series Circuit The dominant circuit used by lighting products is the Series circuit. For a detailed explination please see our lighting FAQ at gordoncablestay.com. Series Circuit Parallel Circuit Preparing the LED Filing and painting the LED is a very common practice and recommended for most of our lighting applications. Use black enamel paint to cover the parts of the LED where light is not wanted. an LED is in a drilled le or nibble hode flange. Top Collision Avoidance File lens off top of LED (optional) File lens off top of File lens off top LED of (optional) LED (optional) Top Collision lue or White Avoidance Architectural Do not When file near an LED is When an the LED emitter placed is in a drilled placed in a drilled hole, file or nibble hole, file or nibble off the flange. off the flange. lue or White elow Deck Architectural Spot Light Collision Lighting Shroud Spot Light lack Avoidance Medium Flood Shrink Light Tube Flood Light Top Collision Avoidance lue or White Architectural Lighting Shroud lack Medium Shrink Tube elow Deck Collision Shrink tube covers solder joints and otton of LED is otton of Avoidance LED pressed is flat, serves as glue points. always painted black always painted black elow Deck Collision Avoidance otton of LED is always painted black Medium Shrink Tube otton of LED is always painted black Small Shrink Tube r White ectural Attaching LEDs & Wiring Apply heat to shrink tube using side Lighting of iron Shroud or mini heat gun such as the Zeny 862D. lack After Medium heating, Shrink quickly Tubepress the tube between fingers to form a flat spot for gluing and mounting. Keep heat away from diode Use super glue for attaching LEDs and wire. Attatch LEDs first, then wire the LEDs together. For detailed tips and techniques go to ordoncablestay.com Shrink tube covers solder joints and pressed flat, serves as glue points. Medium Shrink Tube Small Shrink Tube Version 3.0 Copyright ordon Cable Stay All ights eserved.
6 Lighting Configurations Top ed Collision Avoidance For the top of tower spires and A arch beams. Lighting Kit SKU# MINILK UnderDeck LEDs Medium shrink Support Cable Medium shrink Place LED at top of arch and route wires around the inside of the arch beam. Or, drill hole and place LED. Drill hole in the top of the cross beam, or route wires around the beam VDC oute wires around deck flange A Or, route wires thru drilled hole in flange Wrap wires from top red, bottom red, deck lights; then use hot glue to secure the wire bundle to the deck bottom. Medium shrink Top ed Collision Avoidance and Top White Deck Lighting For the top of tower spires and A arch beams. Lighting Kit SKU# MINILK 1218 VDC UnderDeck LEDs A UnderDeck LEDs Version 3.0 Copyright ordon Cable Stay All ights eserved.
7 Top ed Collision Avoidance and Top White Under eam Deck Light For the top of tower spires and cross beams. Kit SKU# MINILK UnderDeck LEDs Lighting UnderDeck LEDs Medium shrink small shrink 1218 VDC UnderDeck LEDs Top ed and elow Deck ed Collision Avoidance For the top of tower spires and arch beams. Lighting Kit SKU# MINILK Medium shrink 1218 VDC UnderDeck LEDs A UnderDeck LEDs Medium shrink Version 3.0 Copyright ordon Cable Stay All ights eserved.
8 elow Deck ed Collision Avoidance For and A series belowdeck lighting. Lighting Kit SKU# MINILK 1218 VDC A UnderDeck LEDs A Series Deck Sconce Lighting (blue or white) For A Series deck lighting Lighting Kit SKU# ASICWLK Lighting Kit SKU# ASICWLK UnderDeck LEDs 18 VDC UnderDeck LEDs A Version 3.0 Copyright ordon Cable Stay All ights eserved.
9 (blue or white) Series Center Deck Lighting For Series center deck lighting Lighting Kit SKU# ASICWLK Lighting Kit SKU# ASICWLK 1218 VDC Medium shrink 30 Light Spacing 3.25 deck Tower Segment For Series outer deck lighting Series Suspension Lighting (blue or white) UnderDeck LEDs Lighting Kit SKU# ASICWLK Lighting Kit SKU# ASICWLK 1218 VDC ight Left Pair Version 3.0 Copyright ordon Cable Stay All ights eserved.
10 White & lue Flood Lighting For models and general use. Two Channels Lighting Kit SKU# WFLK 1218 VDC A Version 3.0 Copyright ordon Cable Stay All ights eserved.
11 Multicolor Configurations For models and general use. Three Channels Lighting Kit SKU# DLLK Use multicolor LEDs to create almost unlimited color variations; an excellent choice for architecture or scenery lighting applications. Integrate your onbridge lighting with your flood lighting for example, for the ultimate in coordinated pastel like colors that only can produce. From an incandescent amber to a deep vilolet, these highgrade LEDs deliver. equires our three channel controller or multichannel DCC lighting controller. For best color blending, file lens off top of LED When an LED is placed in a drilled hole, file or nibble off the flange. Paint sides and bottom with black enamel ed lue reen 13/64 or 5.16mm hole 5mm SKU# LC3L Version 3.0 Copyright ordon Cable Stay All ights eserved.
12 A Series Deck Sconce Lighting For A Series deck lighting. Lighting Kit SKU# DLLK 18 VDC SupportCable For best color blending, file lens off top of LED Use care when drilling holes into the A30 as its sconces are 6mm wide and hole dimaeter is 5.16mm or 13/64. When an LED is placed in a drilled hole, file or nibble off the flange. A Paint sides and bottom with black enamel For best color blending, file lens off top of LED Lighting Kit SKU# DLLK Series Center Deck Lighting When an LED is placed in a drilled hole, file or nibble off the flange. Paint sides and bottom with black enamel 1218 VDC lue ed reen For best color blending, file lens off top of LED For best color blending, file lens off top of LED When an LED is placed in a drilled hole, file or nibble off the flange. SupportPaint Cablesides and bottom with black enamel When an LED is placed in a drilled hole, file or nibble off the flange. Paint sides and bottom with black enamel For best color blending, file lens off top of LED When an LED is placed in a drilled hole, file or nibble off the flange. For Series deck lighting. For single tower segment. 30 Light Spacing deck Paint sides and bottom with black enamel Tower Segment Version 3.0 Copyright ordon Cable Stay All ights eserved.
13 For Series deck lighting. For single tower segment. Lighting Kit SKU# DLLK 1218 VDC ed reen reen lue ed lue For best color blending, file lens off top of LED When an LED is placed in a drilled hole, file or nibble off the flange. Paint sides and bottom with black enamel Multicolor Flooding Lighting For models and general use. Lighting Kit SKU# FLK 1218 VDC A For best color blending, near m Series Suspension Lighting file lens off top of LED e d hen an LED is aced in a drilled An od ole, file or nibble r e Version 3.0 Copyright ordon Cable Stay All ights eserved. l ue ul
14 Pole Mount and Automobiles Pole Mount Single Head Cool White Lighting Kit SKU# PMSHCWLEDKN 1218 VDC A Pole Mount Double Head Cool White Lighting Kit SKU# PMDHCWLEDKN 1218 VDC A Lighted Automobiles Lighting Kit SKU# LAK5 A Version 3.0 Copyright ordon Cable Stay All ights eserved.
15 Power Supply and Controller Configurations Lighting roups Lighting roups Four Conductors Power Supply 1218VDC Dimmer SKU# PS12V SKU# PS18V SKU# LC3L Power Supply 1218VDC 1 Dimmer SKU# LC1L Version 3.0 Copyright ordon Cable Stay All ights eserved.
16 Notes Version 3.0 Copyright ordon Cable Stay All ights eserved.
Take the drill and clean and ream the hole so the wire can pass through. Drill a 3/16 hole in the center of the flat portion of the tubing.
Mini LED Spotlight Cut & Drill tubing Pieces ½ EMT Conduit Cut at 12 3/8 OD Copper Hard copper Tubing cut 3-1/2 long. Mark and drill a 5/32 hole for wire to pass through 5/8 from end. Take a large pair
More informationInstructions for Lighting an S Scale Caboose
Instructions for Lighting an S Scale Caboose The S Scale Caboose lighting kit is adaptable for most caboose models of rolling stock including American Flyer (TM) and contains the same components as found
More informationC-Note Bookshelf Speaker Kit
C-Note Bookshelf Speaker Kit Thank you for purchasing the C-Note bookshelf speaker kit. This speaker kit was precision cut using CNC machinery for the best possible fit and finish. With a little time and
More informationSignal Lights Demonstration Video Time Duration: - 38 sec. Use the right hand mouse button for video control.
Tip: - Working Turntable Signals and Cabin Lights using Gold TC7.0F1 and Above Hi All, At long last I completed the project to have working signals and cabin lights on my turntable. This is a record of
More informationT1 RED LED. Non-Directional LED wiring. Directional LED wiring. Item # W. Main St. Leola, PA (717)
T1 ED 200 millicandella @ 20ma. 30 milliamps max. 1.85 Vfwd drop 60 viewing angle Item #532 wiring C or # 608, Bridge ectifier Directional wiring diode DC DC dual wiring = directional 's When used with
More informationA BASIC UNDERSTANDING OF LED LIGHTING FOR MINIATURES
A BASIC UNDERSTANDING OF LED LIGHTING FOR MINIATURES Why use LEDs for miniature lighting? There has been a growing interest in the use of LEDs (Light Emitting diodes) for lighting in miniatures. I feel
More informationELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS Lesson 13 EET 150 Electrical Connections Learning Objectives In this lesson you will: see different methods of making electrical connections. learn a procedure for making soldered
More informationModification of USB Sound Card for Asterisk app_rpt Use
Modification of USB Sound Card for Asterisk app_rpt Use First off a huge thank you to Steve for providing the original notes on how to modify a USB sound card. (http://images.qrvc.com/usbfob.pdf) These
More informationIR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015
IR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015 1 2 For the main circuits of the line following robot you soldered electronic components on a printed circuit board (PCB). The
More informationQUASAR ELECTRONICS KIT No DRILL SPEED CONTROLLER
QUASAR ELECTRONICS KIT No. 1074 DRILL SPEED CONTROLLER General Description If you work with an electric drill and unless you are lucky enough to own one of the most sophisticated models with speed control,
More informationLED WIRE WRAPPING INSTRUCTIONS
CONCEPT MODELS Web Address: http://www.con-sys.com 8810 El Toro Way Stockton, CA 95210 Wire Wrap tool with stripped wire in place ready to apply. LED WIRE WRAPPING INSTRUCTIONS 2 CONCEPT MODELS Tools Description
More informationSUGAR CREEK HOTEL PHOTO REAL BUILD KIT
SUGAR CREEK HOTEL PHOTO REAL BUILD KIT by Innovative Hobby Supply INSTRUCTIONS FOR: Kit BK 6407 Sugar Creek Hotel Build Kit ~ S scale Free replacement parts are available simply by calling 866 712 4059.
More informationInstallation tutorial for Console Customs Xbox 360 Dual Rapid fire Microchip for wired and wireless controllers (all versions)
Installation tutorial for Console Customs Xbox 360 Dual Rapid fire Microchip for wired and wireless controllers (all versions) This tutorial is designed to aid you in installation of a console customs
More informationThe Switched Longwire Tuner SLT
The Switched Longwire Tuner SLT Thank you for purchasing the SLT kit from Hendricks QRP Kits. This kit is a very high quality kit that you will find easy to build, yet when you finish, you will have a
More informationModel 333 Single Channel USB Chromatography Data System Relay ( Contact Closure ) Installation
Remove the four screws holding the Model 333 A/D board in the stand-alone box. If the 333 is installed in a GC or HPLC, remove the four hex head screws from the outside of the instrument which secure the
More informationPSU for LawMate 500mW Transmitters. Assembly and Operation Manual
PSU for LawMate 500mW Transmitters Assembly and Operation Manual Introduction Thank you for purchasing LawMate 500mW Power Supply. This power supply was specifically designed for the 500mW LawMate transmitter
More informationScaleRCHelis.com V Light Controller Kit
Thank you for purchasing the ScaleRCHelis.com V1.1 450 Light Controller Kit. This is something you can build in under a hour with some simple soldering equipment. Your kit will include all the parts necessary
More informationSCHWERE PLATTFORMWAGON TYPE SSY 60TON
TWS 5094 SCHWERE PLATTFORMWAGON TYPE SSY 60TON Congratulations on purchasing one of the finer aftermarket resin kits sets available. The photo below is of the completed kit. The Panther tank is not included
More informationWP3653SYDLK/SD/TG/J3 Oval LED Lamp
Oval LED Lamp DESCRIPTIONS The Super Bright Yellow device is based on light emitting diode chip made from AlGaInP Electrostatic discharge and power surge could damage the LEDs It is recommended to use
More informationRF Current Meter Kit
Kit When assembled, this kit provides you with a simple but effective means of measuring the current in antenna wires, and of looking for braid currents on coax feeders. The more current you can get flowing
More informationLAB PROJECT 2. Lab Exercise
LAB PROJECT 2 Objective Investigate photoresistors, infrared light emitting diodes (IRLED), phototransistors, and fiber optic cable. Type a semi-formal lab report as described in the lab manual. Use tables
More informationKingbright. L-1553SYDTK 5 x 5 mm Square Top LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
5 x 5 mm Square Top LED Lamp DESCRIPTIONS The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs
More informationBP-1A. Band-Pass variable filter continuous tuning from 3 to 30MHz. For analogue or software-defined receivers (SDR) Assembly manual
BP-1A Band-Pass variable filter continuous tuning from 3 to 30MHz. For analogue or software-defined receivers (SDR) Assembly manual Last updated: December 1, 2017 ea3gcy@gmail.com Updates and news at:
More informationThe Wave (K-MOD103) GUITAR DWELL REVERB REVERB SWITCH ON OUT OFF
The Wave (K-MOD103) OUT IN GUITAR IN DWELL REVERB REVERB SWITCH ON GUITAR OUT POWER ON OFF OFF Please note, there are no labels for this kit. The controls, switches and connectors have only been labeled
More informationAssembly instructions for the CS-1 ChemShield
Page 1 Of 6 Assembly instructions for the CS-1 ChemShield What is S.M.D SMD=Surface mount devices, like all the components does not have leads, but gets soldered onto flat solder pads. The CS-1 assembly
More informationKingbright. L-59SURKSGC T-1 3/4 (5 mm) Bi-Color Indicator Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
T-1 3/4 (5 mm) Bi-Color Indicator Lamp DESCRIPTIONS The source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The source color devices are made with Gallium Phosphide Green
More informationSoftRock v6.0 Builder s Notes. May 22, 2006
SoftRock v6.0 Builder s Notes May 22, 2006 Be sure to use a grounded tip soldering iron in building the v6.0 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0.1 inch diameter),
More informationTrim down the piece of casting being pointed to with the tip of the pencil in the first picture. It is only the 'inboard casting that needs to be
1. File off the moulding pips from the wheel flanges. File the ends of the tube smooth and de-burr. Assemble the wheel sets with a drop of car engine oil on the axles. Glue the wheel sets into place. 2.
More informationKingbright. L-7104SGC T-1 (3mm) Solid State Lamp DESCRIPTION PACKAGE DIMENSIONS FEATURES APPLICATIONS SELECTION GUIDE
T-1 (3mm) Solid State Lamp DESCRIPTION The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode PACKAGE DIMENSIONS FEATURES Low power consumption Popular T-1
More informationWP63SRC T-1 3/4 (5mm) Solid State Lamp
T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode Electrostatic discharge and power surge could damage
More informationTKEY-1. CW touch key. (no electromechanical contacts) Assembly manual. Last update: May 1,
TKEY-1 CW touch key (no electromechanical contacts) Assembly manual Last update: May 1, 2016 ea3gcy@gmail.com Updates and news at: www.qsl.net/ea3gcy Thanks for constructing the TKEY-1A CW touch key Have
More informationE-AERO EPP PITTS KIT From BP HOBBIES. Parts Included in kit
E-AERO EPP PITTS KIT From BP HOBBIES Parts Included in kit Thank you for purchasing the BP Hobbies/E-aero EPP Pitts. Please take the time to read through the instruction manual before beginning the build.
More informationTrack Bumpers Wood or Plastic Your Choice
Track Bumpers Wood or Plastic Your Choice An assembly method is presented to build track bumpers for non-ballasted track such as Atlas O 2st Century, Ross Custom, Gargraves etc. Whether you decide to build
More informationKingbright. L-132XGD T-1 (3mm) Solid State Lamp DESCRIPTION PACKAGE DIMENSIONS FEATURES APPLICATIONS SELECTION GUIDE
T-1 (3mm) Solid State Lamp DESCRIPTION The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode PACKAGE DIMENSIONS FEATURES Low power consumption Popular T-1 diameter package
More informationELECTRONICS STARTER KIT
ELECTRONICS STARTER KIT (MAP 474 - N02QQ) R These five small self-assembly circuits cover basic principles of electronics and can be adapted for numerous practical application. The five circuits include
More informationS e r v i c e B u l l e t i n # doc
S e r v i c e B u l l e t i n #910159.doc Clearlake Byron Lynden Page 1 of 11 FINAL ASSY/MODEL 330/334 MERGER Title: 330/334 CONTROL BOX DIODES Approval Initials Date Approval Initials Date Author MTL
More information3Insert the second rod no. 4
Yamato: Step-by-step 37 The stern block and searchlight control towers a b c d e f Recommended tools and materials Wood glue Sandpaper (no. 800 grain) Metal file Putty Craft knife For metal: Super Glue
More informationKingbright. L-1503SRC-J4 T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS The Super Bright Red source color devices are made With AlGaInP on Si substrate Light Emitting Diode Electrostatic discharge and power surge could damage the
More informationASPEN STYLE. ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF
1 ASPEN STYLE ORNAMENTAL FENCE INSTALLATION GUIDE 3 Rails, Pressed Top/Flat Bottom Model No. NBR7958-NPF INSTALLATION VIDEO AVAILABLE AT: video01.xcelfence.com Item Description Fence installation and assembly
More informationMaterial. LED Chip. Mounting. Max Length. Environment. Certifications. Warranty. Dimming. COLOR (K) LUMENS (per ft) EFFICACY (LM/W) CRI/Ra R9 Rf Rg
Quantum 2 ANGLED 1005 Description The Quantum 2 ANGLED 1005 Channel is a frosted lensed aluminum channel fixture that is powered by Quantum 2 High Density 08 LED tape light. It is dimmable, surface mountable
More informationIntroduction Parts List
Introduction There are many tutorials available on how to make your own LED spotlights. I ve looked at quite a few and the one I like best is found on HauntForum. The author is Niblique71 and I ve used
More information(Build Instructions)
(Build Instructions) Specifications * Wingspan: 58cm * Length: 50cm * Flying Weight: 59 grams * Channels: 3 (Rudder Elevator Throttle) * Suggested Receiver: 4Ch Micro * Motor: 8mm GearDrive * Prop: GWS
More informationWP7113SRC/DV T-1 3/4 (5mm) Solid State Lamp
T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode Electrostatic discharge and power surge could damage
More informationSoftRock v5.0 Builder s Notes. December 12, Building a QSD Kit
SoftRock v5.0 Builder s Notes December 12, 2005 Building a QSD Kit Be sure to use a grounded tip soldering iron in building the QSD board. The soldering iron needs to have a small tip, (0.05-0.1 inch diameter),
More informationAC/DC POWER SUPPLY KIT
AC/DC POWER SUPPLY KIT MODEL K-11 Assembly and Instruction Manual ELENCO Copyright 2016, 1989 by ELENCO All rights reserved. Revised 2016 REV-O 753211 No part of this book shall be reproduced by any means;
More information1Smooth pieces 4, 5 and 6, using
Yamato: Step-by-step 109 Machine-guns, anti-aircraft guns and decking h e f a b c g d e f a Anti-aircraft gun base x 2 b Anti-aircraft gun (bottom) x 2 c Anti-aircraft gun (top) x 2 d Machine-gun base
More informationEngineering Directive
Thing-a-ma-Jig Finishing To Finish a model means to apply paint and other decorations to complete the look of your model. Meaning to apply a finish. That is what we will discuss in this section. Applying
More informationKingbright. L-7113SRSGW T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS The source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode The source color devices are made with Gallium Phosphide Green Light
More informationAssembly Instructions: Kit #5
Assembly Instructions: Kit #5 1. Insert the T-pin into one of the caps. 2. Insert the rotor core into the same cap as shown below. Apply some pressure to push the rotor core approximately 1/2" (10-12 mm)
More informationWP59SURKSGC T-1 3/4 (5 mm) Bi-Color Indicator Lamp
T-1 3/4 (5 mm) Bi-Color Indicator Lamp DESCRIPTIONS The source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The source color devices are made with Gallium Phosphide Green
More informationTek-Bot Remote Control Transmitter Board Construction
Tek-Bot Remote Control Transmitter Board Construction Purpose This tutorial illustrates the procedure for construction of the Transmitter board for the Tek-bot. A Guide to Soldering Many of you have soldered
More informationExplorer Wiring Kit (assembled)
Explorer Wiring Kit (assembled) For Vintage, Firestorm & Standard Series Please Read All Instructions Before Beginning. Tools you will need: Soldering Iron (35 watt preferably) Solder Wet Sponge Wire Clippers
More informationTHE FULL LINE METAL SPECIALISTS
PRECISION METALS THE FULL LINE METAL SPECIALISTS 6917 West 59th Street Chicago, Illinois 60638 Phone 773/586-8503 Fax 773/586-8556 www.ksmetals.com THE USES ARE ENDLESS!!! Hobby, Craft, DIY, Artist, Architecture,
More informationINSTRUCTION MANUAL. Force Transducer Output Tube Repair Kit
INSTRUCTION MANUAL Model 400-TR Force Transducer Output Tube Repair Kit June 4, 2004, Revision 5 Copyright 2004 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Pkwy. S., Unit 4 Aurora, Ontario,
More informationWP7113SRSGW T-1 3/4 (5mm) Solid State Lamp
T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS The source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode The source color devices are made with Gallium Phosphide Green Light
More informationXkitz.com XLO-5CP Control Panel for Five Channel Color Light Organ
Xkitz.com XLO-5CP Control Panel for Five Channel Color Light Organ Rev 1.15 An Optional accessory for the Xkitz XLO-5 or XLO-5DC 5 Channel Color Light Organs Introduction This kit contains all the electronics
More informationExercise 12. Semiconductors EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Introduction to semiconductors. The diode
Exercise 12 Semiconductors EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with the operation of a diode. You will learn how to use a diode to rectify ac voltage to produce
More informationSHADOWBOX INSTALLATION FOR: Standard 6 H x 8 W Shadowbox Fence 5 x 5 Routed Posts Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail
SHADOWBOX INSTALLATION FOR: Standard 6 H x 8 W Shadowbox Fence 5 x 5 Routed Posts Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail Storage and Handling Fence Preparation and Layout Locate and Set Posts
More informationWP36BGD T-1 (3mm) Blinking LED Lamp
T-1 (3mm) Blinking LED Lamp DESCRIPTIONS The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended
More informationSTEADY HAND GAME WITH LATCHING LED
ESSENTIAL INFORMATION BUILD INSTRUCTIONS CHECKING YOUR PCB & FAULT-FINDING MECHANICAL DETAILS HOW THE KIT WORKS TEST YOUR HAND-EYE COORDINATION WITH THIS STEADY HAND GAME WITH LATCHING LED Version 2.0
More informationIMPROVING AND SCRATCHBUILDING AN F4U CORSAIR COCKPIT BY MIKE ASHEY
IMPROVING AND SCRATCHBUILDING AN F4U CORSAIR COCKPIT BY MIKE ASHEY This article presents some basic techniques for improving and scratchbuilding a cockpit. For this project I used Model Technologies photoetch
More informationCobra X Q Construction Tips Construction: Bel y pan
Cobra X Q Construction Tips : The white plastic in this kit is high impact styrene. It can be painted with most types of coatings if light coats are applied this is necessary due to the thickness of the
More informationV6.2 SoftRock Lite Builder s Notes. November 17, 2006
V6.2 SoftRock Lite Builder s Notes November 17, 2006 Be sure to use a grounded tip soldering iron in building the v6.2 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0.1 inch
More informationTools and Tips: ( 1 )
Tools and Tips: As you build instructions will show in my many picture manual how to assemble. You can use your own methods as you desire, my results are very good. A smooth, flat work surface is very
More informationDV28. This light can be surface. DV28 technical specifications
DV28 This light can be surface mounted in areas needing low level lighting for steps, walkways, doorways and for general lighting on larger boats. The bolted bezel is machined stainless steel 316 L and
More informationSecret Storage Book. Part Lists. The Book
Secret Storage Book Part Lists Wood Screws ( (Werbilt flat head phillips #4 x ⅜ in) Drills Screwdrivers Hinges (2 medium and 3 small) Corner braces (¾ inches) Paint or scrapbook paper Leather Thick cardboard
More informationSoftRock v6.0 Builder s Notes. April 6, 2006
SoftRock v6.0 Builder s Notes April 6, 006 Be sure to use a grounded tip soldering iron in building the v6.0 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0. inch diameter),
More informationRoR Step-by-Step Review * Popper Chopper Mini Bike 1:8 Scale Monogram Kit #7534 Review
RoR Step-by-Step Review 20130604* Popper Chopper Mini Bike 1:8 Scale Monogram Kit #7534 Review This kit was one of the more famous Tom Daniel releases back in the 70 s Tom Daniel has designed many awesome
More informationKingbright. L-3VEGW T-1(3mm) Bi-Color Indicator Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS SELECTION GUIDE
T-1(3mm) Bi-Color Indicator Lamp DESCRIPTIONS The source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode The source color devices are made with Gallium
More informationCylon Raider Lighting Kit
Cylon Raider Lighting Kit By Madman Lighting Inc Copyright June 2015, all rights reserved. All trademarks property of their respective owners. WARNING: This product contains small parts not suitable for
More informationStandard Kit #1 (3-way switch)
Standard Kit #1 (3-way switch) Please Read All Instructions Before Beginning. Tools you will need: Soldering Iron (35 watt preferably) Solder Wet Sponge Wire Clippers 3/8 Drill Bit 1/4 Drill Bit Variable
More informationKingbright. L-169XID 2 x 3mm Rectangular Solid Lamp DESCRIPTION PACKAGE DIMENSIONS FEATURES APPLICATIONS SELECTION GUIDE
2 x 3mm Rectangular Solid Lamp DESCRIPTION The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode PACKAGE DIMENSIONS FEATURES
More informationPopsicle Stick Bridge Design and Construction. Idaho State University
Popsicle Stick Bridge Design and Construction Bengal STEM Day 2019 Idaho State University 1 Bridge Rules Maximum Allowable Bridge Weight = 12 oz (340 grams). Note that a typical 4½ inch popsicle stick
More informationWP937GYW T-1(3mm) Bi-Color Indicator Lamp
T-1(3mm) Bi-Color Indicator Lamp DESCRIPTIONS The source color devices are made with Gallium Phosphide Light Emitting Diode The source color devices are made with Gallium Arsenide Phosphide on Gallium
More informationA Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making
A Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making From This This To Part 1 By James Mitchell (a.k.a. mitchejc) Note: Building rifle stocks is super fun and the idea with this pictorial
More informationExperiment 2 Soldering Parallel and Series Circuits and using the Digital Multimeter
Experiment 2 Soldering Parallel and Series Circuits and using the Digital Multimeter Introduction Soldering is the most common means of joining components to each other or to circuit boards in electronics.
More informationWP9294QBC/D 5mm Round LED Lamp
5mm Round LED Lamp DESCRIPTIONS The Blue source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band
More informationConstruction Guide European Version
Construction Guide European Version PCB This section describes how to build up the DRO-350 printed circuit board (PCB). The bare PCB is available for purchase on the order page. Static Protection Bare
More informationStarship Lighting Kit
The BIG Starship Lighting Kit By Madman Lighting Inc Copyright June 2011, all rights reserved. WARNING: This product contains small parts not suitable for children less than 12 years of age. DO NOT SWALLOW!
More informationASSEMBLY OF BENDER ELEMENTS
simple procedure for the ASSEMBLY OF BENDER ELEMENTS Prepared by: Claudia Festa Angel Palomino Tae Sup Yun Jong Sub Lee Minsu Cha Particulate Media Research Laboratory - Georgia Institute of Technology
More informationModifying a USB sound fob to act as a repeater interface for app_rpt
Modifying a USB sound fob to act as a repeater interface for app_rpt This document explains how to modify a USB sound fob to work as a repeater interface for app_rpt. The following materials and tools
More informationWP154A4SUREQBFZGC T-1 3/4 (5mm) Full Color LED Lamp
T-1 3/4 (5mm) Full Color LED Lamp DESCRIPTIONS The source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The source color devices are made with InGaN Light Emitting Diode The
More informationLED Lighting High Quality LED Lighting for Agricultural, Commercial and Industrial Applications
LED Lighting High Quality LED Lighting for Agricultural, Commercial and Industrial Applications Slimline and Premium Work Lights R6 and R Beacons Light Bars Trailer Lights Choosing the Correct LED Light
More information5W Mono Amplifier Kit
5W Mono Amplifier Kit Kit Construction Before you start assembling your kit there are a couple of important things you must do. FIRST read through these instructions entirely before you start construction
More informationWP937EGW T-1(3mm) Bi-Color Indicator Lamp
T-1(3mm) Bi-Color Indicator Lamp DESCRIPTIONS The source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode The source color devices are made with Gallium
More informationStandard Kit #1 (5-way switch)
Standard Kit #1 (5-way switch) Please Read All Instructions Before Beginning. Tools you will need: Soldering Iron (35 watt preferably) Solder Wet Sponge Wire Clippers 3/8 Drill Bit 1/4 Drill Bit Variable
More informationpower light source TM Technical Data DS34
power light source TM Luxeon V Emitter Technical Data DS34 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
More informationNano v3 pinout 19 AUG ver 3 rev 1.
Nano v3 pinout NANO PINOUT www.bq.com 19 AUG 2014 ver 3 rev 1 Nano v3 Schematic Reserved Words Standard Arduino ( C / C++ ) Reserved Words: int byte boolean char void unsigned word long short float double
More informationLED Modifications. Below are directions on how I modify LED strings for repairs, upgrade to full wave rectification, or custom lengths/number of LEDs.
LED Modifications Below are directions on how I modify LED strings for repairs, upgrade to full wave rectification, or custom lengths/number of LEDs. Caution! Working with electricity and modifying electrical
More informationAPPLICATION NOTES FOR THROUGH-HOLE LEDs
APPLICATION NOTES FOR THROUGH-HOLE s Storage conditions 1. Avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature. 2. s
More informationWP7113VW1C T-1 3/4 (5mm) Solid State Lamp
T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist
More informationWarning: CHOKING HAZARD -Small Parts. Not for Children Under 9 yrs. Kit Recommended for Ages 12 and up.
The Original Warning: CHOKING HAZARD -Small Parts. Not for Children Under 9 yrs. Kit Recommended for Ages 12 and up. Table of Contents Soldering.. 3 How the WASP Works.. 7 The Build...... 12 Troubleshooting......30
More informationTHE STEP LADDER (K-978)
THE STEP LADDER (K-978) Footswitch True-bypass = 0 db OUTPUT INPUT Ground shunt switching on the input jack keeps the amp quiet when unplugged from the Step Ladder. Attenuator Pot Full clockwise = 0 db
More informationObtained from Omarshauntedtrail.com
BORN2HAUNT.COM http://www.born2haunt.com/zombie01.html Zombie Heres the wire frame of my next victim. Another zombie for my grave yard. Another zombie for my grave yard. I used a 1/2" PVC tee as the base.
More informationCircuit Board Assembly Instructions for Babuinobot 1.0
Circuit Board Assembly Instructions for Babuinobot 1.0 Brett Nelson January 2010 1 Features Sensor4 input Sensor3 input Sensor2 input 5v power bus Sensor1 input Do not exceed 5v Ground power bus Programming
More informationSolar Panels Build Your Own Instructions for the Do It Yourself Person Let s have some fun!
Solar Panels Build Your Own Instructions for the Do It Yourself Person Let s have some fun! Before we get started lets talk about a few things like materials and tools. Let s start off with tools as Lowes
More informationThe Indexerlights of the F16 Block 52
The Indexerlights of the F16 Block 52 For the building of the indexerlights I used the great drawings of Guillaume "Dimebug" Lelevé, merci beaucoup. He gave an O.K to host these drawings at f16simulator.nl.
More informationLighthouse Beginner s soldering kit
Lighthouse Beginner s soldering kit Kit contains: 1 x 220 ohm resistor (Red, Red, Black) 1 x 82k ohm resistor (Grey, Red, Orange) 2 x 220k ohm resistors (Red, Red, Yellow) 2 x Diodes 1 x Power switch 1
More informationInduction Heater Coil Kit Compact low voltage, high current induction coil
Induction Heater Coil Kit Compact low voltage, high current induction coil Model: CT-400-KIT Features and Specifications High power water cool-able copper coil PCB Layout designed to reduce eddy losses
More informationPacific Antenna RF Probe assembly
Pacific Antenna RF Probe assembly Parts In the Kit: 1 1/2 x 3 Blue PEX tube 2 5/8 O.D. vinyl caps 2 3/32 dia x 2 brass tube sections 2 Pogo spring contacts 1 4-40 x 7/16 pan head screw 1 4-40 x 1/4 pan
More information