Introduction Parts List

Size: px
Start display at page:

Download "Introduction Parts List"

Transcription

1 Introduction There are many tutorials available on how to make your own LED spotlights. I ve looked at quite a few and the one I like best is found on HauntForum. The author is Niblique71 and I ve used some of his illustrations in this tutorial. The spotlights in this tutorial have one primary change from Niblique s, the ability to run from either a 9v internal battery or an external 12v supply. My haunt has a few places where running wiring is either not feasible or not aesthetically pleasing, so running the spotlight from a 9v battery is advantageous. The other change is the addition of an on-off switch for turning the spotlight on/off in order to conserve battery life. Parts List Each of the items below is per spotlight One 5 inch long section of 1" thin wall PVC pipe Be sure to get the thin wall and not the thicker Schedule 40 PVC. In Denver, I found the thin wall PVC at Lowes but Home Depot did not have it. Two Plastic bottle caps Either Coke or Pepsi products work fine and it doesn t matter whether you buy 2 liter, 1 liter or 20 oz bottle, the caps are all the same size. Additionally, even the black bottlecaps come with advertising these days so I paint them all as a result color doesn t matter. Three 5 mm LED (Light Emitting Diodes) There is a universe of choices for LEDs these days, colors, sizes, intensity, view angle, etc. I ve limited my builds to 3 LED spots but you can fit at least 5 five mm LEDs on a bottle cap and maybe even 7. I ordered my LEDs from superbrightleds.com in four different colors: Blue (RL5- B4630), Red (RL5-R8030), White (RL5-W8045) and Ultraviolet (RL5-UV ). Two Resistors (one for the 9v battery and the other for the 12 v power supply) Resistor size is based on number of LEDs, LED parameters (required current) and LED configuration. I bought mine at Radio Shack. More on this later. Small slide switch I used a SPDT submini slide switch from Radio Shack ( ). This was a pricey item (about $1.60 per switch) and you can probably find them less expensive on the Web. One 9v battery connector One 2.1mm female plug for the 12v power supply Another pricey item, about $2.00 per plug. If you plan to run a 12v power supply, you will also need the male jack to match (not included in the kit) but 2.1mm is a very common size. Many wall wart power supply plugs will fit. One #10 ¾ round head machine screw Two #10 flat washers One #10 wing nut Two #2 round head wood screws (optional) These little screws can be difficult to find. Don t even bother with the big box hardware stores (Home Depot, Lowe s). I had the best luck at Ace hardware in their specialty screw cabinet. In

2 any case, these screws are not mandatory. They are used to attach the switch to PVC pipe and a good shot of Super Glue will do just as well. One ¼ by 3 Eye Lag Screw (aka Ceiling Hanger) When I asked the Home Depot guy to show me the eye lag screws, I was met with a blank stare. However, when I asked for the ceiling hangers, he knew exactly what I needed. Gel Super Glue I used Super Glue to not only hold components in place to also to fill any little holes or gaps. The best product for this is the Control Gel super glue by Loctite. Regular super glue will just run into the hole. Two 6 lengths of 22 Gauge Solid Hookup Wire Jacket color doesn t really matter. I bought mine at Radio Shack in a package that contained three 30 foot rolls in red, black and green jacket color. One 3 length of 2x4 This is for the spotlight base Black (or other desired color) spray paint Heat shrink tubing ¼ and smaller diameter

3 Tools List Safety glasses Hand drill Drill bits - 1/8, ¼ Soldering iron, Solder and damp sponge Wood Saw For cutting wood base Hack Saw for cutting PVC Wire Clippers Needle nose pliers small and large Small Phillips screwdriver Small regular screwdriver Dremel tool Optional but makes the job much easier. Hot air gun Required - This is important in order to make the bottle caps fit inside the PVC and to shrink the heat shrink tubing around the soldered joints. Wire strippers Multi Meter (not necessary but helpful) Sandpaper

4 LED Tutorial LEDs are amazing little devices and are becoming the light source of choice in many applications including brake lights for cars, traffic lights and even home lighting. They can be manufactured to produce many hues and LEDs of different colors can be combined and controlled to produce nearly any color. There are a few things that you should know about LEDs before you begin working with them. The first is that LEDs are DC powered devices which means that they have a definite polarity. DC powered devices have positive and negative, meaning it s important that they be hooked up correctly in order to properly function. The LEDs that we are going to work with have two wires coming out of the base. The names of these wires follow the old tube convention (you have to be over 40 to even remember vacuum tubes!), one is called the anode the other the cathode. For our purposes it is easier think in terms of positive (anode) and negative (cathode). Fortunately, LED manufacturers have made it easy for us to determine which wire is which The wire on the positive side of the LED is usually about ½ longer than the wire on the negative side. There a number of ways to define the operation of an LED depending on what you need to do. The example sheet below shows the LED parameters for the red LEDs that we are using. Don t let all of the numbers throw you off, however, in our case we are most concerned about color, power requirements and viewing angle. Part Number: RL5-R Super-Red LED (AlGalnP) absolute maximum ratings: (TA=25 C) PARAMETER SYMBOL RATING UNIT Power Dissipation PD 80 mw Continuous Forward Current IF 20 ma Peak Forward Current (1/10th duty cycle, 0.1ms pulse width) IFM 50 ma Reverse Voltage VR 5.0 V Operating Temperature TA -40~+85 C Storage Temperature TSTG -40~+85 C Reverse Current (VR=5V) IR 10 µa Lead Soldering Temperature (3mm from body) 260C (for 3 seconds) optoelectric characteristics: PARAMETER SYMBOL MAX TYP UNIT TEST View Angle of Half Power 2ø1/2 30 Degree Forward Voltage VF V IF=20mA Peak Emission Wavelength ÿ P 630 nm IF=20mA Luminous Intensity IV 8000 mcd IF=20mA

5 Dimensions in millimeters (inches) Spectral Graph

6 Note: photo is to show beam pattern, digital camera and monitor cannot accurately reproduce the pure colors emmitted from leds- see emmission wavelength Viewing angle provides information on the brightness and size of the light cone for a given LED. Basically, the viewing angle tells you at what angle at which the brightness of the LED is cut in half. This also tells you the width of the illumination zone (at 50% brightness) at a given distance from the light. In the extreme, a laser has a very small viewing angle; even at 100 yards, the point of light is nearly the same size as at 1 inch from the device. In our case, we want an LED that will have a larger zone of

7 illumination so that our props are lit correctly. Viewing angle for the red LED is 30 degrees. So, at 3 feet from the red LED, the illumination zone, at 50%+ brightness will be 1.6 feet across. The effective size of the illumination zone will be larger but the light intensity will fall off outside of the 1.6 foot diameter. Here s the math Viewing Angle (VA) = 30 degrees ½ of VA = 15 degrees At 3 feet away from the LED, the 50% illumination zone of a single red LED will be: LED Viewing Angle = 30 2*(3 feet * tangent 15 degrees) = 1.6 feet Color is obvious (pink isn t usually a great Halloween color!) but what about power? Looking at the parameter sheet, you will see that the forward current is 20mA (milli-amperes or.020 amperes) and the peak current is 50 ma. This means that the normal current required for this LED is 20 ma and the peak current is 50 ma. You won t want to power your LED at more than 50 ma for very long unless you like fried LEDs! Just think of current like the water flow through a pipe. In this case, the LED requires just a tiny trickle of electrical water to make it work, at least compared to those old AC spotlights you used to use. The other interesting power parameter is Forward Voltage. This is the voltage drop across the LED. You can think of voltage as the water pressure required to provide the water current through the LED. If you don t have enough pressure (voltage) the required water current won t be sufficient to water the plants (power the device). In our case, the forward voltage for the red LED is 2.2v. There s a trick for making sure that you keep the electrical current in the right range based on the voltage you are using. This is done by using a resistor in line between the power source and the LED. The resistor size depends on two things, the voltage that you will use to provide the required electrical current and the average current needed to power the LED. Rather than get into the mathematics, look instead at this website: This site allows you to input the parameters for your LED application and calculates the correct resistance value to use to limit the current to the LED device.

8 For example: Our LED spotlight will use three LEDs connected in parallel, each with a forward current of 20 ma and a forward voltage of 2.2 volts. LEDs in parallel: Supply Voltage 9 VOLTS Voltage Drop Across LED 2.2 VOLTS Desired LED Current 20 MILLIAMPS How many LEDs connected 3 Calculated Limiting Resistor OHMS Nearest higher rated 10% resistor 120 Ohm Calculated Resistor Wattage WATTS Safe pick is a resistor with power rating of 0.68 WATTS Plugging this into the resistance calculator gives a resistance value of ohms. Unfortunately, they don t make ohm resistors so we ll go with the next largest size, in this case, 120 ohms. One other note: For our purposes, resistors generally come in ¼ (0.25) watt and ½ (0.5) watt packages. The calculator recommends a 0.68 watt resistor but we ll be just fine using 0.5 watt resistor. But wait, you say, our spotlights will be powered by one of two different power supplies, either a 9 volt battery or a 12v supply. Doesn t that mean we will need two resistors? You would be right we will use a 120 ohm resistor for the 9 volt battery and a 180 ohm resistor for the 12 volt supply for our red LEDs. The white and blue LEDs will require different resistors. Plug in 12 volts into the resistance calculator and try it out. Remember to use the LED parallel section or you will get the wrong answer!

Take the drill and clean and ream the hole so the wire can pass through. Drill a 3/16 hole in the center of the flat portion of the tubing.

Take the drill and clean and ream the hole so the wire can pass through. Drill a 3/16 hole in the center of the flat portion of the tubing. Mini LED Spotlight Cut & Drill tubing Pieces ½ EMT Conduit Cut at 12 3/8 OD Copper Hard copper Tubing cut 3-1/2 long. Mark and drill a 5/32 hole for wire to pass through 5/8 from end. Take a large pair

More information

Part No. Emitting Color Polarity. KW1-S281AAA Orange Common Anode. KW1-S281CAA Orange Common Cathode

Part No. Emitting Color Polarity. KW1-S281AAA Orange Common Anode. KW1-S281CAA Orange Common Cathode Features.28inch (7.mm) digit height. The thickness is thinness than tradition display. Packaged in tape and reel for SMT manufacturing. Low current operation. Excellent characters appearance. Categorized

More information

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. SINGLE DIGIT LED DISPLAY (0.3 Inch) DATA SHEET LSD3021-XX REV. : A

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. SINGLE DIGIT LED DISPLAY (0.3 Inch) DATA SHEET LSD3021-XX REV. : A SINGLE DIGIT LED DISPLAY (0.3 Inch) DATA SHEET DOC. NO : QW0905- REV. : A DATE : 23 - Dec. - 2005 Page 1/7 Package Dimensions PIN NO.1 A LIGITEK F G B E D C R.DP 7.62 (0.3") 19.0 (0.75") 2.54*6= 15.24(0.6")

More information

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR4100 - Red Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 20 12 Volt Applications Automotive

More information

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC TM LTH3MM1V Series 3mm (T-1) Through Hole Built in Resistor for 1VDC LTH3MM1VFR4700 - Yellow Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 1 Volt MSL Applications Automotive

More information

Starship Lighting Kit

Starship Lighting Kit The BIG Starship Lighting Kit By Madman Lighting Inc Copyright June 2011, all rights reserved. WARNING: This product contains small parts not suitable for children less than 12 years of age. DO NOT SWALLOW!

More information

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR4600 - Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 12 Volt Applications Automotive Indoor

More information

The ability to make basic voltage and resistance measurements using a digital multimeter

The ability to make basic voltage and resistance measurements using a digital multimeter Congratulations on your purchase of a new OneShot chassis! The PC01 OneShot combines a rugged enclosure, power supply, and discrete instrument DI in a compact 1/4U package. A few minutes of assembly are

More information

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR44 - White Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 2 12 Volt Applications Automotive

More information

SPEC NO: DSAN1915 REV NO: V.1A DATE: AUG/30/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:

SPEC NO: DSAN1915 REV NO: V.1A DATE: AUG/30/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: T-1 (3mm) SOLID STATE LAMP Part Number: L-1154SRC-J4 Super Bright Red Features Low power consumption. Popular T-1 diameter package. General purpose leads. Reliable and rugged. Long life - solid state reliability.

More information

Instructions for Lighting an S Scale Caboose

Instructions for Lighting an S Scale Caboose Instructions for Lighting an S Scale Caboose The S Scale Caboose lighting kit is adaptable for most caboose models of rolling stock including American Flyer (TM) and contains the same components as found

More information

Luckylight. 0.56" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-56NXLB-P

Luckylight. 0.56 Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-56NXLB-P .56" Quadruple Digit Numeric Displays Technical Data Sheet Model No.: KW4-56NXLB-P Spec No.:W5643E/F Rev No.: V.2 Date: Oct/23/26 Page: 1 OF 6 Features:.56 (inch) digit height. Excellent segment uniformity.

More information

Inolux 5mm Full-Color Through Hole Lamp HV-5RGBXX Series

Inolux 5mm Full-Color Through Hole Lamp HV-5RGBXX Series Inolux HV-5RGBXX Series July 21, 2015 Version of 1.1 Page 1/11 DISCLAIMER INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design.

More information

An important note about your Charged Up Exploration Kit.

An important note about your Charged Up Exploration Kit. ChargedUp Hands On Exploration Kit First An important note about your. DO NOT ASSUME that you will see something at the tournament because it was in this kit. This supplemental study material IS NOT part

More information

A BASIC UNDERSTANDING OF LED LIGHTING FOR MINIATURES

A BASIC UNDERSTANDING OF LED LIGHTING FOR MINIATURES A BASIC UNDERSTANDING OF LED LIGHTING FOR MINIATURES Why use LEDs for miniature lighting? There has been a growing interest in the use of LEDs (Light Emitting diodes) for lighting in miniatures. I feel

More information

Luckylight. 10 Segment Light Bars Displays. Technical Data Sheet. Part No.: KWL-R1025VB

Luckylight. 10 Segment Light Bars Displays. Technical Data Sheet. Part No.: KWL-R1025VB 1 Segment Light Bars Displays Technical Data Sheet Part No.: KWL-R125VB Spec No.: W1251A Rev No.: V.2 Date:Dec/22/211 Page: 1 OF 6 Features: Industrial standard size. Low power consumption. Categorized

More information

Luckylight. Square With 5Ф Dome 4 Lead. Common Cathode Full Color LED. Technical Data Sheet. Part No.: U48RGB3C-022-SL

Luckylight. Square With 5Ф Dome 4 Lead. Common Cathode Full Color LED. Technical Data Sheet. Part No.: U48RGB3C-022-SL Square With 5Ф Dome 4 Lead Common Cathode Full Color LED Technical Data Sheet Part No.: U48RGB3C-22-SL Spec No.: BNH6 X85 Rev No.: V.3 Date: Jul.//28 Page: OF Features: Fewer LEDs required. Super flux

More information

TOYO LED ELECTRONICS LIMITED Room 1610, Hong Kong Plaza, 188 Connaught Road West, Hong Kong. Tel : (852)

TOYO LED ELECTRONICS LIMITED Room 1610, Hong Kong Plaza, 188 Connaught Road West, Hong Kong. Tel : (852) PACKAGE DIMENSION INTERNAL CIRCUIT DIAGRAM NOTES: 1. All dimensions are in millimeter(inch); 2. Tolerance is ±0.25mm(0.01 ) especially other specified; 3. Pin length, housing color, marking no & circuit

More information

Luckylight. 10 Segment Light Bars Displays. Technical Data Sheet. Part No.: KWL-R1025BB

Luckylight. 10 Segment Light Bars Displays. Technical Data Sheet. Part No.: KWL-R1025BB Segment Light Bars Displays Technical Data Sheet Part No.: KWL-R25BB Spec No.: W25A Rev No.: V.2 Date:Dec/22/211 Page: 1 OF 6 Features: Industrial standard size. Low power consumption. Categorized for

More information

SE-LED1.8-BD77 LED 1,8mm blau diffus

SE-LED1.8-BD77 LED 1,8mm blau diffus Package Dimension: Part No. Chip Material Lens Color Source Color SE-LED1.8-BD77 InGaN Blue Diffused Blue Note: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25 mm (.010 ) unless otherwise

More information

Repairing your Porsche 928 Central Warning System (CWS) controller

Repairing your Porsche 928 Central Warning System (CWS) controller Repairing your Porsche 928 Central Warning System (CWS) controller Disclaimer: This procedure is for a 1984 Porsche 928 S controller. Overview: Under the left foot pedal (dead pedal) of the Porsche 928

More information

Luckylight. 2mm Tower Type. Blue LED. Technical Data Sheet. Part No.: 204BD2A-B4-1G

Luckylight. 2mm Tower Type. Blue LED. Technical Data Sheet. Part No.: 204BD2A-B4-1G 2mm Tower Type Blue LED Technical Data Sheet Part No.: 24BD2A-B4-1G Spec No.: B X565 Rev No.: V.3 Date: Jun./22/28 Page: 1 OF 7 Features: 2mm Tower. High efficiency. Selected minimum intensities. Available

More information

Description. Kingbright

Description. Kingbright T-1 (3mm) SOLID STATE LAMP Part Number: L-7104ID High Efficiency Red Features Low power consumption. Popular T-1 diameter package. General purpose leads. Reliable and rugged. Long life - solid state reliability.

More information

So you just want to light up an LED. What resistor should you use?

So you just want to light up an LED. What resistor should you use? Resistors for LEDs Basics: Picking Resistors for LEDs evilmadscientist.com/2012/resistors-for-leds/ Lenore EdmanAugust 29, 2012 So you just want to light up an LED. What resistor should you use? Maybe

More information

Description. Kingbright

Description. Kingbright 15mmx15mm LIGHT BAR Part Number: DE/4SURKD Hyper Red Features Uniform light emitting area. Easily mounted on P.C. boards or industry standard sockets. Flush mountable. Excellent on/off contrast. Can be

More information

Chip LEDs with reflectors

Chip LEDs with reflectors Chip LEDs with reflectors SML- Series SML- Series The SML- series are high luminance chip LEDs with reflectors. The compact and leadless design of these LEDs allows for high mounting density.!features

More information

Description. Kingbright

Description. Kingbright 19.05mmx3.81mm LED LIGHT BAR Part Number: KB-B100SURKW Hyper Red Features Uniform light emitting area. Low current operation. Easily mounted on P.C. boards. Flush mountable. Excellent on/off contrast.

More information

Halloween Projects from Aidtopia. Haunted Mirror

Halloween Projects from Aidtopia.   Haunted Mirror Halloween Projects from Aidtopia http://www.aidtopia.com/halloween/mirror/index.html Haunted Mirror Here's information on cool indoor Halloween prop you can build in a weekend. The Effect You check your

More information

Description. Kingbright

Description. Kingbright 3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: Super Bright Orange Features 3.0mmx1.0mm right angle SMD LED, 2.0mm thickness. Low power consumption. Wide viewing angle. Ideal for back light and

More information

Assembly Instructions

Assembly Instructions Assembly Instructions For the SSQ-2F 3.1 MHz Rife Controller Board Kit v1.41 Manual v1.00 2012 by Ralph Hartwell Spectrotek Services GENERAL ASSEMBLY INSTRUCTIONS Arrange for a clean work surface with

More information

SPECIFICATIONS FOR REFOND SURFACE MOUNT LED

SPECIFICATIONS FOR REFOND SURFACE MOUNT LED SPECIFICATIONS FOR REFOND SURFACE MOUNT LED Model: RF-OURA30TS-CF-Y Company Name: Confirmed By Customer: DATE: ESneFeature Viewing angle:120 deg The materials of the LED dice is AIGaInP 3.50mm 2.80mm 1.90mm

More information

Model 333 Single Channel USB Chromatography Data System Relay ( Contact Closure ) Installation

Model 333 Single Channel USB Chromatography Data System Relay ( Contact Closure ) Installation Remove the four screws holding the Model 333 A/D board in the stand-alone box. If the 333 is installed in a GC or HPLC, remove the four hex head screws from the outside of the instrument which secure the

More information

SPEC NO: DSAA3955 REV NO: V.12A DATE: AUG/11/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:

SPEC NO: DSAA3955 REV NO: V.12A DATE: AUG/11/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: 7.6mmX7.6mm SUPER FLUX LED LAMP Part Number: L-7676CSURC-E Hyper Red Features Super flux output. Design for high current operation. Outstanding material efficiency. Reliable and rugged. RoHS compliant.

More information

Chip LEDs with reflectors

Chip LEDs with reflectors Chip LEDs with reflectors SML- Series SML- Series The SML- series are high luminance chip LEDs with reflectors. The compact and leadless design of these LEDs allows for high mounting density.!features

More information

Description. Kingbright

Description. Kingbright T-1 3/4 (5mm) SOLID STATE LAMP Part Number: L-63GD Green Features Low profile. Low power consumption. Long life - solid state reliability. Reliable and rugged. RoHS compliant. Description The Green source

More information

SUBMINIATURE SOLID STATE LAMP. Features. Description. Package Dimensions

SUBMINIATURE SOLID STATE LAMP. Features. Description. Package Dimensions SUBMINIATURE SOLID STATE LAMP Part Number: AM2520EC03 High Efficiency Red Features Subminiature package. Gull wing lead. Long life - solid state reliability. Low package profile. Moisture sensitivity level

More information

SURFACE MOUNT DISPLAY. Features. Description. Package Dimensions& Internal Circuit Diagram

SURFACE MOUNT DISPLAY. Features. Description. Package Dimensions& Internal Circuit Diagram SURFACE MOUNT DISPLAY Part Number: ACSC03-41SRWA-F01 Super Bright Red Features 0.3 inch digit height. Low current operation. Excellent character appearance. Mechanically rugged. Gray face,white segment.

More information

Description. Kingbright

Description. Kingbright T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-59EGW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life-solid state reliability. High glass transition temperature

More information

Fast Tramp Freighter Lighting Kit

Fast Tramp Freighter Lighting Kit Fast Tramp Freighter Lighting Kit By Madman Lighting Inc Copyright April 2009, all rights reserved. WARNING: This product contains small parts not suitable for children less than 12 years of age. DO NOT

More information

MacombSO.org. The components in this kit are for low voltage / low current. They are to be used with (2) D cell batteries that you provide.

MacombSO.org. The components in this kit are for low voltage / low current. They are to be used with (2) D cell batteries that you provide. ChargedUp Hands On Exploration Kit First An important note about your. DO NOT ASSUME you will see something at the tournament because it was in this kit. This data sheet is included to help you identify

More information

Description. Kingbright

Description. Kingbright T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: L-710A8CB/1GD Green Features Pre-trimmed leads for pc mounting. Black case enhances contrast ratio. Wide viewing angle. High reliability life measured in

More information

American Opto Plus LED Corp. L197LPGC-TR

American Opto Plus LED Corp. L197LPGC-TR American Opto Plus LED Corp. L197LPGC-TR 1.6 x 0.8 x 0.8 mm Green SMD, Tape & Reel 1 PACKAGE OuTLINES specification RECOMMEND PAD LAYOUT RECOMMEND PAD LAYOUT CS63BGT2C package outlines Notes: 1. All dimensions

More information

Description. Kingbright

Description. Kingbright 20 SEGMENTS BAR GRAPH ARRAY Part Number: DC-20/20SURKWA Hyper Red Features Suitable for level indicators. Low current operation. Excellent on/off contrast. End stackable. Mechanically rugged. Different

More information

DATA SHEET QW0905- LSIR3331/TBS-X-PF TAPE AND BOX TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LSIR3331/TBS-X-PF REV.

DATA SHEET QW0905- LSIR3331/TBS-X-PF TAPE AND BOX TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LSIR3331/TBS-X-PF REV. TAPE AND BOX TYPE LED LAMPS Pb Lead-Free Parts LSIR3331/TBS-X-PF DATA SHEET DOC. NO : REV. : QW0905- LSIR3331/TBS-X-PF A DATE : 19 - Nov. - 2004 Page 1/9 Package Dimensions P2 ΔH H2 H1 L W0 W2 W1 W3 D

More information

1.9x3.9mm RECTANGULAR SOLID LAMP. Features. Description. Package Dimensions. Part Number: WP144GDT

1.9x3.9mm RECTANGULAR SOLID LAMP. Features. Description. Package Dimensions. Part Number: WP144GDT 1.9x3.9mm RECTANGULAR SOLID LAMP Part Number: WP144GDT Green Features Low power consumption. Reliable and rugged. Excellent uniformity of light output. Suitable for level indicator. Long life - solid state

More information

LITE-ON TECHNOLOGY CORPORATION

LITE-ON TECHNOLOGY CORPORATION Features * Designed for ease in circuit board assembly. * Black case enhance contrast ratio. * Solid state light source. * Reliable and rugged. Package Dimensions Lamp Part No. Lens Source Color LTL-10233WP

More information

Building the Toothpick Audio CW Filter

Building the Toothpick Audio CW Filter Building the Toothpick Audio CW Filter Introduction The toothpick is a simple variable bandpass audio filter designed to compliment the Splinter QRPp Trans-Receiver. The filter also contains an audio amplifier

More information

PVC Swift/Skeiner Tutorial

PVC Swift/Skeiner Tutorial PVC Swift/Skeiner Tutorial Windmill Arm Base The swift/skeiner is assembled in 3 pieces: the base, the arm, and the windmill. The three pieces can be taken apart so that the swift/skeiner can be stored

More information

Installing the Onyx Heated Bed

Installing the Onyx Heated Bed Installing the Onyx Heated Bed This short supplement will guide you through replacing the Phebe I heated bed on your Rostock MAX with the new Onyx heated bed. Your Onyx upgrade kit should include the following

More information

Description. Kingbright

Description. Kingbright T-1 3/4 (5mm) SOLID STATE LAMP Part Number: L-7113LYD Yellow Features Description Low power consumption. Popular T-1 3/4 diameter package. General purpose leads. Reliable and rugged. Long life - solid

More information

SPEC NO: DSAF1859 REV NO: V.9B DATE: APR/14/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:

SPEC NO: DSAF1859 REV NO: V.9B DATE: APR/14/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP934RS/GD Green Features Pre-trimmed leads for pc mounting. Pillars are designed for positioning the housing on P.C. board. Black case enhances contrast

More information

Description. Kingbright

Description. Kingbright 14.22mm (0.56INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SC56-11CGKWA Green Features 0.56 inch digit height. Low current operation. Excellent character appearance. Easy mounting on P.C. boards or sockets.

More information

Description. Kingbright

Description. Kingbright 1.6X0.8mm INFRARED EMITTING DIODE Part Number: KP-1608F3C Features 1.6mmX0.8mm SMT LED, 1.1mm thickness. Mechanically and spectrally matched to the phototransistor. Package: 2000pcs / reel. Moisture sensitivity

More information

BrewsBySmith.com STC DIY Kit

BrewsBySmith.com STC DIY Kit BrewsBySmith.com STC-1000 + DIY Kit Contact Information: Greg Smith www.brewsbysmith.com greg@boostbysmith.com I. Hardware Included: STC-1000 flashed with latest software (v1.06 currently) (if purchased)

More information

MEI. Features: Descriptions: Applications:

MEI. Features: Descriptions: Applications: Features: Low Power consumption. High efficiency and low cost. Good control and free combinations on the colors of LED lamps. Good lock and easy to assembly. Stackable and easy to assembly. Stackable vertically

More information

550-xx mm LED CBI. Circuit Board Indicator Square Back Housing, Tri-Block x x x 3

550-xx mm LED CBI. Circuit Board Indicator Square Back Housing, Tri-Block x x x 3 5mm LED CBI Circuit Board Indicator Square Back Housing, Tri-Block 5.9 [.235] 3.8 [.145] Features 2.99 [.118].35 [.250].35 [.250] 18.4 [.734].35 [.250] RECOMMENDED P.C. HOLE PATTERN 4.83 [.190] A Red Cathode

More information

Applications Backlight and Indicator. Package Dimensions. Notes: FSL B-FAT5NC3

Applications Backlight and Indicator. Package Dimensions. Notes: FSL B-FAT5NC3 Features 1.6mm*0.8mm SMT LED, Super thin (0.4H mm) Low Power Consumption Wide Viewing Angle Various Colors Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow

More information

HL-PST-1608U70GC 2.60 [0.10] 0.60 [0.02] 1.10 [0.04] Description. Recommended Soldering Pattern. Package Dimensions. Applications 0.80 [0.

HL-PST-1608U70GC 2.60 [0.10] 0.60 [0.02] 1.10 [0.04] Description. Recommended Soldering Pattern. Package Dimensions. Applications 0.80 [0. 0.18 [0.01] 0.68 [0.03] 1.10 [0.04] 0.80 [0.03] Features Extremely wide viewing angle Suitable for all SMT assembly and solder process Available on tape and reel Moisture sensitivity level: Level 4 Package:4000pcs/reel

More information

T-1 3/4 (5mm) FULL COLOR LED LAMP. Features. Descriptions. Package Dimensions

T-1 3/4 (5mm) FULL COLOR LED LAMP. Features. Descriptions. Package Dimensions T-1 3/4 (5mm) FULL COLOR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP154A4SEJ3VBDZGC/CA Features Uniform light output. Low power consumption.

More information

SPEC NO: DSAN4362 REV NO: V.1A DATE: JAN/10/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:

SPEC NO: DSAN4362 REV NO: V.1A DATE: JAN/10/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: 1.6X0.8mm SMD CHIP LED LAMP Part Number: Hyper Red Features 1.6mmX0.8mm SMT LED, 1.06mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Various colors and lens

More information

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. INFRARED EMITTING DIODES Pb. Lead-Free Parts DATA SHEET LIR3331/S152-PF

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. INFRARED EMITTING DIODES Pb. Lead-Free Parts DATA SHEET LIR3331/S152-PF INFRARED EMITTING DIODES Pb Lead-Free Parts LIR3331/S152-PF DATA SHEET DOC. NO : REV. QW0905- LIR3331/S152-PF C DATE : 29 - Mar. - 2007 Page 1/7 Package Dimensions 5.0 5.9 7.6 8.6 1.5 MAX 4.3±0.5 5.7±0.5

More information

SPEC NO: DSAB8533 REV NO: V.19A DATE: AUG/16/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED:

SPEC NO: DSAB8533 REV NO: V.19A DATE: AUG/16/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-59SURKCGKW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life-solid state reliability. RoHS compliant. Descriptions

More information

The Switched Longwire Tuner SLT

The Switched Longwire Tuner SLT The Switched Longwire Tuner SLT Thank you for purchasing the SLT kit from Hendricks QRP Kits. This kit is a very high quality kit that you will find easy to build, yet when you finish, you will have a

More information

Luckylight. 1.2" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.:KW XLA

Luckylight. 1.2 Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.:KW XLA .2" Quadruple Digit Numeric Displays Technical Data Sheet Model No.:KW4-24XL Spec No.: W24/ Rev No.: V.2 Date: Nov/3/23 Page: OF 6 pproved: JoJo Checked: Sun Drawn: Liu Features:.2 (inch) digit height.

More information

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only BAR GRAPM LED DISPLAY DATA SHEET LBD1311URFUGHYS-XX/RP55 REV. : B DATE :

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only BAR GRAPM LED DISPLAY DATA SHEET LBD1311URFUGHYS-XX/RP55 REV. : B DATE : BAR GRAPM LED DISPLAY DATA SHEET DOC. NO : QW0905- REV. : B DATE : 19 - Oct. - 2006 PART NO. Page 1/9 Package Dimensions LIGITEK ELECTRONICS CO.,LTD. PIN NO.1 26.0.5 LIGITEK A3 A2A1 F1 B3 B2 B1 F2 18.5

More information

SPEC NO: DSAD0979 REV NO: V.11A DATE: JUL/11/2017 PAGE: 1 OF 5 APPROVED:

SPEC NO: DSAD0979 REV NO: V.11A DATE: JUL/11/2017 PAGE: 1 OF 5 APPROVED: 3.2x1.6mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AP3216SRCPRV Super Bright Red Features 3.2mmx1.6mm SMD LED, 1.1mm thickness.

More information

IR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015

IR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015 IR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015 1 2 For the main circuits of the line following robot you soldered electronic components on a printed circuit board (PCB). The

More information

3.4mm RIGHT ANGLE LED INDICATOR. Features. Description. Package Dimensions. Part Number: WP138A8QMP/GD/TG

3.4mm RIGHT ANGLE LED INDICATOR. Features. Description. Package Dimensions. Part Number: WP138A8QMP/GD/TG 3.4mm RIGHT ANGLE LED INDICATOR Part Number: WP138A8QMP/GD/TG Green Features Surface mount type. Black case enhances contrast ratio. Wide viewing angle. High reliability life measured in years. Package:1000pcs

More information

550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4

550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4 5.97 [.235] 3.0 [.118] 5mm LED CBI Circuit Board Indicator Sloped Back Housing, Quad Block 2.97 [.117] Features.35 [.250].35 [.250] 25 [.984] ID RECOMMENDED P.C. HOLE PATTERN 4.9 [.185] A Red Cathode for

More information

Figure 1. CheapBot Line Follower

Figure 1. CheapBot Line Follower The CheapBot Line Follower v2.0 is a plug-in single-board sensor for almost any programmable robot brain. With it, a robot can detect the presence of a black or white zone beneath its two sensors. In its

More information

Obtained from Omarshauntedtrail.com

Obtained from Omarshauntedtrail.com DaveintheGrave's Halloween Props Animated Crawling Skeleton Build a life-size skeleton torso that realistically crawls across the lawn one arm at a time. 1. Motor Base and Linkage Assembly BASE - I used

More information

STEADY HAND GAME WITH LATCHING LED

STEADY HAND GAME WITH LATCHING LED ESSENTIAL INFORMATION BUILD INSTRUCTIONS CHECKING YOUR PCB & FAULT-FINDING MECHANICAL DETAILS HOW THE KIT WORKS TEST YOUR HAND-EYE COORDINATION WITH THIS STEADY HAND GAME WITH LATCHING LED Version 2.0

More information

Installation tutorial for Console Customs PS3 TrueFire Standard Rapid fire Microchip for Sixaxis and Dualshock 3 controllers

Installation tutorial for Console Customs PS3 TrueFire Standard Rapid fire Microchip for Sixaxis and Dualshock 3 controllers Installation tutorial for Console Customs PS3 TrueFire Standard Rapid fire Microchip for Sixaxis and Dualshock 3 controllers This tutorial is designed to aid you in installation of a console customs rapid

More information

550-xx07. 5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs x x Features

550-xx07. 5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs x x Features 5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs 550-xx07.10 [.240] 3.0 [.118] 3.8 [.145].10 [.240] 4.83 [.190] Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color 5.21

More information

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. INFRARED EMITTING DIODES Pb. Lead-Free Parts DATA SHEET LSIR3333-PF REV. :

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. INFRARED EMITTING DIODES Pb. Lead-Free Parts DATA SHEET LSIR3333-PF REV. : INFRARED EMITTING DIODES Pb Lead-Free Parts LSIR3333-PF DATA SHEET DOC. NO : REV. : QW0905- LSIR3333-PF A DATE : 04 - Mar. - 2008 Package Dimensions LIGITEK ELECTRONICS CO.,LTD. Page 1/7 5.0 5.9 7.6 8.6

More information

The W3FF Portable Dipole

The W3FF Portable Dipole The W3FF Portable Dipole This is the antenna I designed for my 'walking portable' station. It is a dipole constructed out of the plastic plumbing pipe CPVC. There are telescoping whips at the ends of each

More information

Description. Kingbright

Description. Kingbright T-1 (3mm) CYLINDRICAL LED LAMP Part Number: L-424YDT Yellow Features Cylindrical type. Low power consumption. Reliable and rugged. Long life - solid state reliability. Available on tape and reel. RoHS

More information

Instructions for Building the Pulsed Width Modulation Circuit. MC-12 (DC Motor Controller or PWM) From Electronic Light Inc. (revised kit 10/03/08)

Instructions for Building the Pulsed Width Modulation Circuit. MC-12 (DC Motor Controller or PWM) From Electronic Light Inc. (revised kit 10/03/08) Instructions for Building the Pulsed Width Modulation Circuit MC-12 (DC Motor Controller or PWM) From Electronic Light Inc. (revised kit 10/03/08) Congratulations on your purchase of the MC-12 DC Motor

More information

HP60MVD 8mm,1W Red LED 1W Power LED Light Source. Technical Data Sheet. Features: Descriptions: Applications:

HP60MVD 8mm,1W Red LED 1W Power LED Light Source. Technical Data Sheet. Features: Descriptions: Applications: Features: long operating life Small footprint and low profile Energy efficient High current operation Silicone encapsulation Available in 27K, 3K, 35K, 4K, 5K, 57K, 65K and 1K The product itself will remain

More information

THE THUNDERDRIVE (K-950)

THE THUNDERDRIVE (K-950) THE THUNDERDRIVE (K-950) OUTPUT DISTORTION Unplug when not in use to save battery life. TO AMP IN The Thunderdrive Modkitsdiy.com FROM GUITAR OUT Use these instructions to learn: How to build an effects

More information

Descriptions. Kingbright

Descriptions. Kingbright T-1(3mm) BI-COLOR INDICATOR LAMP Part Number: L-3VEYW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life - solid state reliability. RoHS compliant. Descriptions

More information

7.6mmX7.6mm SUPER FLUX LED LAMP. Features. Descriptions. Package Dimensions

7.6mmX7.6mm SUPER FLUX LED LAMP. Features. Descriptions. Package Dimensions 7.6mmX7.6mm SUPER FLUX LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-7676CZGC-G Green Features Super flux output. Design for high current

More information

Description. Kingbright

Description. Kingbright 1.6X0.8mm SMD CHIP LED LAMP Part Number: Green Features 1.6mmX0.8mm SMT LED, 1.1mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package: 2000pcs / reel. Moisture

More information

SPEC NO: DSAF1341 REV NO: V.7B DATE: AUG/20/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:

SPEC NO: DSAF1341 REV NO: V.7B DATE: AUG/20/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: 2.0x1.25mm SMD CHIP LED LAMP Part Number: APHCM2012CGCK-F01 Green Features 2.0X1.25mm SMT LED,0.5mm max. thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package

More information

Connectors for Ribbon Flex and Soldering Tips

Connectors for Ribbon Flex and Soldering Tips Connectors for Ribbon Flex and Soldering Tips 11235 West Bernardo Court, Suite 102 San Diego, CA 92127 888-880-1880 Fax: 707-281-0567 EnvironmentalLights.com Instructions for Connecting Power or Control

More information

Descriptions. The Hyper Red source color devices are made with Suitable for all SMD assembly and solder process.

Descriptions. The Hyper Red source color devices are made with Suitable for all SMD assembly and solder process. 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: Hyper Red ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions Single color. The Hyper Red

More information

3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions

3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions 3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528SYSK Super Bright Yellow Features Single color. Suitable for all SMT assembly and solder process. Available on tape and reel. Ideal for backlighting.

More information

THE W3FF HOMEBREW BUDDIPOLE

THE W3FF HOMEBREW BUDDIPOLE THE W3FF HOMEBREW BUDDIPOLE A PORTABLE ANTENNA DESIGN FOR AMATEUR RADIO History of the Buddipole In January of 2000, I began experimenting with a walking portable ham station. Since then, thousands of

More information

Guitarpedalkits.com Overdrive Pedal Build Instructions

Guitarpedalkits.com Overdrive Pedal Build Instructions Page 1 Guitarpedalkits.com Overdrive Pedal Build Instructions Follow the instructions in this guide to build your very own DIY overdrive pedal from GuitarPedalKits.com. If you re a first time builder,

More information

Descriptions. Kingbright

Descriptions. Kingbright T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-59GYW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life-solid state reliability. RoHS compliant. Descriptions

More information

SunLED Corporation P. 1/5

SunLED Corporation P. 1/5 Features Ideal for indication light on hand held products Long life and robust package Variety of lens types and color choices available Package: 1500pcs / reel Moisture sensitivity level : level 3 RoHS

More information

Flat Style Fender Flares Front Pair. Jeep. Included in Hardware Kit:

Flat Style Fender Flares Front Pair. Jeep. Included in Hardware Kit: Jeep Flat Style Fender Flares Front Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure

More information

Luckylight. 0.54" Dual Digit Alphanumeric Displays. Technical Data Sheet. Model No: KWA-541XWB-Y

Luckylight. 0.54 Dual Digit Alphanumeric Displays. Technical Data Sheet. Model No: KWA-541XWB-Y .54" Dual Digit Alphanumeric Displays Technical Data Sheet Model No: KWA-54XWB-Y Spec No.: C5243A/B Rev No.: V.2 Date:Apr//26 Page: O 6 eatures:.54 (inch) digit height. Excellent segment uniformity. Sold

More information

Description. Applications

Description. Applications 1.6x0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHK1608RWC/Z WHITE Features 1.6mmx0.8mm SMT LED, 0.7mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR.

More information

Omarshauntedtrail.com. Obtained from. Merlin's Wall Sconce.

Omarshauntedtrail.com. Obtained from. Merlin's Wall Sconce. http://hauntershangout.com/home/wallsconce.asp Plaque Construction Merlin's Wall Sconce Warning: This project uses Electricity! Build at your own risk. Not for children to build. Ever been to a haunt and

More information

Package Schematics. Unit. Capacitance (Typ.) (VF=0V, f=1mhz) Emitting Material. Lens-color

Package Schematics. Unit. Capacitance (Typ.) (VF=0V, f=1mhz) Emitting Material. Lens-color Features Ideal for indication light on hand held products Long life and robust package Standard Package: 2,000pcs/ Reel MSL (Moisture Sensitivity Level): 3 RoHS compliant Package Schematics Notes: 1. All

More information

Connectors for Strip and Soldering Tips

Connectors for Strip and Soldering Tips Connectors for Strip and Soldering Tips Instructions for Connecting Power or Control Signals to 12 or 24 Volt DC LED Strip 11235 West Bernardo Court, Suite 102 San Diego, CA 92127 888-880-1880 Fax: 707-281-0567

More information

Through Hole Lamp Product Data Sheet LTL-4231N-002 Spec No.: DS Effective Date: 03/25/2000 LITE-ON DCC RELEASE

Through Hole Lamp Product Data Sheet LTL-4231N-002 Spec No.: DS Effective Date: 03/25/2000 LITE-ON DCC RELEASE Through Hole Lamp Product Data Sheet LTL-4231N-002 Spec No.: DS20-2000-100 Effective Date: 03/25/2000 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien

More information

I HT TOPL TOPLIGHT 0.4 FOUR DIGIT SUPER RED DISPLAY A-4403CS. Features

I HT TOPL TOPLIGHT 0.4 FOUR DIGIT SUPER RED DISPLAY A-4403CS. Features 0.4 FOUR DIT SUPER RED DISAY Features 0.4 inch digit height Super Red emitting color White segment color, black face Low current operation Easy mounting on PCB boards or sockets Lead free, RoHS compliant

More information

SOT-23 SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: KM-23LYD

SOT-23 SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: KM-23LYD SOT-23 SURFACE MOUNT LED LAMP Part Number: KM-23LYD Yellow Features SOT-23 package surface mount LED lamp. Low power consumption. Long life - solid state reliability. Package: 2000pcs / reel. Moisture

More information