TECHNICAL DATA ELECTRO CHEMISTRY DIFFERENTIAL PH AND ORP. phd sc Digital Diferrential PH and ORP Sensors
|
|
|
- Maximillian Ramsey
- 5 years ago
- Views:
Transcription
1 TECHNICAL DATA ELECTRO CHEMISTRY phd sc Digital Diferrential PH and ORP Sensors
2 ELECTRO CHEMISTRY Ordering Information phd sc Digital Differential ph/orp Sensors All digital sensors include built-in digital electronics and integral 10 m cable terminated with connector for the sc100 digital controller. Body styles: Convertible threads at both ends, designed for tee-mounting or other flow through mountings, and pipe mounting for immersion Insertion no threads on the electrode end, designed for use with insertion valve assembly Sanitary 2-inch flange for a tri-clover style fitting Immersion used with chain mounting or pipe mounting ph Sensors DPD1P1.99 PEEK 1 Convertible Glass, General Purpose 70ºC DPD1P3.99 PEEK 1 Convertible Glass, HF-resistant 70ºC DPD2P1.99 PEEK 1 Insertion Glass, General Purpose 70ºC DPD3P1.99 PEEK 1 Sanitary Glass, General Purpose 70ºC DPD1R1.99 Ryton 2 Convertible Glass, General Purpose 70ºC DPD1R3.99 Ryton 2 Convertible Glass, HF-resistant 70ºC ORP Sensors DRD1P5.99 PEEK 1 Convertible Platinum 70ºC DRD1P6.99 PEEK 1 Convertible Gold 70ºC DRD2P5.99 PEEK 1 Insertion Platinum 70ºC DRD1R5.99 Ryton 2 Convertible Platinum 70ºC DRD1R6.99 Ryton 2 Convertible Gold 70ºC Digital Gateway ADpHD Digital Gateway, convert phd analog sensors to digital output for connecting to sc100 digital controller phd Analog Sensors All analog sensors include built-in preamplifier and integral 4.5 m cable terminated with stripped and tinned wires. Definitions of body styles: Convertible threads at both ends, designed for tee-mounting or other flow through mountings, and pipe mounting for immersion Insertion has no threads on the electrode end, designed for use with insertion valve assembly Sanitary has a 2-inch flange for a Tri-Clover style fitting ph Sensors PD1P1.99 PEEK 1 Convertible Glass, General Purpose 95ºC PD1P3.99 PEEK 1 Convertible Glass, HF-resistant 95ºC PD2P1.99 PEEK 1 Insertion Glass, General Purpose 95ºC PD3P1.99 PEEK 1 Sanitary Glass, General Purpose 95ºC PD1R1.99 Ryton 2 Convertible Glass, General Purpose 95ºC PD1R3.99 Ryton 2 Convertible Glass, HF-resistant 95ºC ORP Sensors RD1P5.99 PEEK 1 Convertible Platinum 95ºC RD1P6.99 PEEK 1 Convertible Gold 95ºC RD2P5.99 PEEK 1 Insertion Platinum 95ºC RD1R5.99 Ryton 2 Convertible Platinum 95ºC RD1R6.99 Ryton 2 Convertible Gold 95ºC
3 Dimensions Convertible Style Insertion Style 35.4 mm (1.36 inches) 35.4 mm (1.36 inches) 26.7 mm (1.05 inches) mm (2.34 inches) 29.5 mm (1.16 inches) mm (1.54 inches) mm (9.14 inches) mm (10.68 inches) 26.7 mm (1.05 inches) 49.8 mm (1.96 inches) mm (2.34 inches) mm (1.54 inches) mm (9.14 inches) mm (10.68 inches) 29.5 mm (1.16 inches) Sanitary Style Immersion Style 54.6 mm (2.15 inches) 54.6 mm (2.15 inches) 43.9 mm (1.73 inches) mm (2.34 inches) mm (1.54 inches) 29.5 mm (1.16 inches) 49.8 mm (1.96 inches) mm (9.14 inches) mm (10.68 inches) 34.8 mm (1.37 inches) 26.7 mm (1.05 inches) 59.4 mm (2.34 inches) 29.5 mm (1.16 inches) 4.5 mm (0.179 inches) 57.2 mm (2.25 inches) 35.8 mm (1.41 inches) mm (10.42 inches) mm ( inches) 32.8 mm (1.29 inches) Digital Gateway mm (1.35 inches) mm (7.25 inches) Analog Convertible Style Analog Insertion Style Analog Sanitary Style
4 ELECTRO CHEMISTRY Specifications ph Sensors Most ph applications fall in the 2.5 to12.5 ph range. A Hach Lange phd sc Differential ph sensor with the wide-range glass process electrode performs exceptionally well in this range. Some industrial applications require accurate measurement and control below 2 or above 12 ph. In these special cases, please contact Hach Technical Support for further details. Measuring Range -2 to 14 ph Sensitivity ± 0.01 ph Stability 0.03 ph per 24 hours, non-cumulative Operating Temperature Digital Sensor: -5 to 70ºC Analog Sensor with Digital Gateway: -5 to 105ºC Immersion Sensor: 0 to 50ºC Flow Rate 3 m per second, maximum Sensor Pressure/Temperature Limits Digital: 6.9 bar at 70ºC Analog: 6.9 bar at 105ºC Built-in Temperature Element NTC 300 ohm thermistor for automatic temperature compensation and analyzer temperature readout Transmission Distance 100 m, maximum 1000 m, maximum when used with a termination box Sensor Cable (integral) 4 conductor cable with one shield and polyurethane jacket; rated to 105ºC; 10 m standard length Wetted Materials PEEK or Ryton (PVDF), salt bridge of matching material with Kynar junction, glass process electrode, titanium ground electrode, and Viton O-ring seals (ph sensor with optional HF-resistant glass process electrode has 316 stainless steel ground electrode, and perfluoroelastomer wetted O-rings; consult factory for other available wetted O-ring materials) ORP (Redox) Sensors For best ORP measuring results in solutions containing zinc, cyanide, cadmium or nickel, Hach recommends using the phd sc ORP sensor equipped with an optional gold electrode. Measuring Range to mv Sensitivity ± 0.5 mv Stability 2 mv per 24 hours, non-cumulative Operating Temperature Digital Sensor: -5 to 70ºC Analog Sensor with Digital Gateway: -5 to 105ºC Immersion Sensor: 0 to 50ºC Flow Rate 3 m (10 ft.) per second, maximum Sensor Pressure/Temperature Limits Digital: 6.9 bar at 70ºC Analog: 6.9 bar at 105ºC Built-in Temperature Element NTC 300 ohm thermistor for analyzer temperature readout only no automatic temperature compensation necessary for ORP measurement Transmission Distance 100 m, maximum 1000 m, maximum when used with a termination box Sensor Cable (integral) 4 conductor cable with one shield and polyurethane jacket; rated to 105ºC; 10 m standard length Wetted Materials PEEK or Ryton (PVDF), salt bridge of matching material with Kynar junction, glass and platinum (or plastic and gold) process electrode, titanium ground electrode, and Viton O-ring seals *Specifications subject to change without notice.
5 Mounting Hardware Sanitary Mount (1) MH018S8SZ 316 SS Includes 2-inch sanitary tee and heavy-duty clamp. Special cap and EPDM compound gasket are supplied with sensor but can be separately ordered. Union Mount (2) CPVC SS Includes standard 1-1/2 inch tee, special union pipe with adapter, sealing hub, and lock ring in respective material, and Viton O-ring. Flow-through Mount (3) MH334N4NZ CPVC MH314N4MZ 316 SS Includes a standard 1-inch tee in respective material. Insertion Mount (4) + (5) Digital Analog CPVC MH736M4MZ CPVC SS MH716M4MZ 316 SS Includes a 1-1/2 inch ball valve in respective material, 1-1/2 inch NPT close nipple, sensor adapter with two Viton O-rings and wiper, extension pipe, pipe adapter, back tube, and lock ring. Immersion Mount See seperate Technical Datasheet for Immersion Mounting Hardware.
6 ELECTRO CHEMISTRY DOC Jun04 DR. BRUNO LANGE GMBH & CO. KG Willstätterstraße 11 D Düsseldorf Tel. +49 (0) Fax +49 (0) HACH LANGE LTD Lennox Road Basingstoke Hampshire, RG22 4AP Tel. +44 (0) Fax +44 (0)
phd sc Digital Differential ph/orp Sensors
DOC023.52.03251.Jun05 phd sc Digital Differential ph/orp Sensors User Manual HACH LANGE GmbH, 2005. All rights reserved. Printed in Germany. DOC023.52.03251.Jun05 phd sc Digital Differential ph/orp Sensors
ph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
Bulb ph and ORP Electrodes
Bulb ph and ORP Electrodes Type: PH200C, PH200 CS, PH222 CD, PH223 CD, PH635 CD, ORP500 C, ORP500 CS, ORP222 CD, Main Features Epoxy or glass body. Single or double junction technology. Large gel reference
TUpH 396RVP and 398RVP Retractable ph/orp Sensors
Instruction Sheet TUpH Sensors LIQ_MAN_ABR_396RVP-398RVP September 2013 TUpH 396RVP and 398RVP Retractable ph/orp Sensors Specifications SPECIFICATIONS 396RVP 398RVP Measurements and Ranges ph: 0-14; ORP:
Multi-Electrode Mounting (used for ph, Orp and Specific Ion) Honeywell Proprietary
Page: AE-7 Series 7773 Model Selection Guide Meredian Electrode with Price Data Multi-Electrode Mounting (used for ph, Orp and Specific Ion) Honeywell Proprietary Model Selection Guide 51-52-16-33 Issue
Digital conductivity transmitter
Digital conductivity transmitter Compact version with integrated conductivity electrodes Remote version with seperated transmitter for short (15 ft.) or long (1500 ft.) distance Commissioning is easy due
Series 7777 Meredian II Electrode In-Line or Immersion Mounting
Series 7777 Meredian II Electrode In-Line or Immersion Mounting Section 2 Page: AE-17 Model Selection Guide with Price Data Model Selection Guide 51-52-16-17 Issue 18 Combines measuring and reference electrodes,
Model 50 Ground Loop ph Sensor Model 55 Solution Ground ph Sensor
Model 50 Ground Loop ph Sensor Model 55 Solution Ground ph Sensor Features Patented Plunger 1 ph Electrode Design Patented Porous 2 Teflon Liquid Junctions Double Junction Reference Cell Integral Differential
S8000 Series ph/orp Electrode Platform. Self Cleaning Flat Surface ph/orp Electrodes LIQUID ANALYTICAL SOLUTIONS THE NEXT GENERATION
THE NEXT GENERATION Self Cleaning Flat Surface ph/orp Electrodes Resist Coating Resist Abrasion Modular Plug and Play Configurable Enhanced ERP Reference System PPS Construction S8000 Series ph/orp Electrode
Key Number I II III IV V _ - - _ - - _ - _, _,
Issue 7 Page 1 of 8 Series 7773 Electrode Mounting Model Selection Guide Instructions Select the desired key number. The arrow to the right marks the selection available. Make one selection per table,
Signet ph/orp Electrodes General Purpose
Signet 2724-2726 ph/orp Electrodes General Purpose Compatible with ALL Signet ph/orp instruments and SmartPro transmitters Features Patented reference design for exceptional performance and prolonged life
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
inc Channel 1 ph, ORP (Redox) Conductivity or Dissolved Oxygen Transmitter Channel 2 Temperature Transmitter Black (V-) Green (V-)
phiconntm, phikliptm, and sensorloggertm are trademarks of phionics Inc.. The phiconntm connector system and the phikliptm array system are covered by U.S. Patent Nos. 6,331,117, 6,612,848, 6,824,394,
phix Compact 4.10 PH, TEMPERATURE AND REDOX MEASUREMENT DATASHEET EN 4.10 PHIX DATASHEET 1812
PH, TEMPERATURE AND REDOX MEASUREMENT General The advanced and unique design of phix Compact ensures that your work is done fast, easy and with accuracy. The compact design offers a union in one end, and
Type PLC Fitting. Valve for Continuous control. Diaphragm valve. Output
Digital Inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Signet ph/orp Electrodes
Signet 2724-2726 ph/orp Electrodes Compatible with ALL Signet ph/orp Instruments Features Flat Protected Bulb Patented reference design for exceptional performance* Mounts in Signet standard fittings from
S8000 Series ph/orp Electrode Platform. Knowledge and Experience You Can Depend On. Self Cleaning Flat Surface ph/orp Electrodes
THE NEXT GENERATION Self Cleaning Flat Surface ph/orp Electrodes Resist Coating Resist Abrasion Modular Plug and Play Configurable Enhanced ERP Reference System PPS Construction Knowledge and Experience
Model Q40CT. System Features. Toroidal Conductivity Monitor...
ATI s Model Q40CT toroidal conductivity system is designed for on-line monitoring of chemically aggressive process solutions. This blind, analog version is ideally suited for applications where reliable
Precision Thermistor Sensors
Precision Thermistor Sensors For Laboratory Applications ON-400 Series U For Use in Laboratory or Other High-Accuracy Applications U Rugged Construction Can Be Used for Short Term Water and Soil Readings
Measuring and Controlling Unit Multronic OC
Measuring and Controlling Unit Multronic OC One channel measuring and controlling unit for ph / conductivity / Chlorine measuring Automatic temperature compensation Measuring and control behaviour simultaneously
Immersion ph/orp Sensors
Immersion ph/orp Sensors ASTI offers unique solutions for process measurement problems: Best reference lifetime in process industry through nonporous cross linked conductive polymer Rugged industrial grade
Conductivity sensor for hygienic applications
Conductivity sensor for hygienic applications 2- or 4-electrode technology Extended measuring range 0.05 S/cm... 500 ms/cm Process connections, materials, surface finish designed for use in hygienic applications
General Purpose Toroidal Conductivity Sensors
Product Data Sheet PDS 71-226/228/revG April 2013 Model 226 and 228 General Purpose Toroidal Conductivity Sensors NON-CONTACTING (TOROIDAL) SENSORS resist corrosion and fouling. SENSORS ARE IDEAL for measuring
4.00 ULTRASONIC ANALYZER
U.S. PRICE LIST PAGE 1 OF 14 ULTRASONIC IN-LINE ANALYZER FOR LIQUIDS EVALUATION UNIT (1) BINARY LIQUIDS 8100-1/2-19" Rhosonics Model 8100 (19" rack - basic analyzer - 1 x sensor input) $9,875.00 8100-BENCHTOP
The transducer component converts the measured signal and displays the actual value.
Digital inductive conductivity transmitter System Integration Provides low Total Cost of Ownership PEEK/PPA version for CIP applications TEACH IN and SIMULATION Function Approval PVDF Version PEEK Version
OPTISENS ORP 8590 Technical Datasheet
OPTISENS ORP 8590 Technical Datasheet ORP sensor for water and wastewaster industry Large ceramic diaphragm and integrated Pt100 Special sensor design for all-purpose applications Low maintenance costs
Isolated STs Series, 4-20 ma Dissolved Oxygen and Temperature transmitter for in-line or submersible applications Insertion (in-line)
phiconntm, phikliptm, and sensorloggertm are trademarks of phionics Inc.. The phiconntm connector system and the phikliptm array system are covered by U.S. Patent Nos. 6,331,117, 6,612,848, 6,824,394,
TB404 Conductivity sensors. Perfect for use in standard to highly corrosive solutions
Data sheet TB404 Conductivity sensors Toroidal Perfect for use in standard to highly corrosive solutions Greatly reduces coating and other fouling problems Inductive measurement technique yields a solution
ph/orp Transmitter SIGNET
SIGNET 8750- ph/orp Transmitter -8750.090- D-4/0 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury. Contents. Installation.
ABB ph/orp analyzer and probe package
Water Technologies & Solutions fact sheet ABB ph/orp analyzer and probe package Series AX466 dual input analyzer description and use AX466 analyzers incorporate the latest technology to provide highly
Signet 2751 DryLoc ph/orp Smart Sensor Electronics
Signet 2751 DryLoc ph/ Smart Sensor Electronics Features Probe health monitoring, glass impedance and broken glass detection Memory chip interface that allows for transferable calibration, runtime data,
Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.
Technical Information Condumax W CLS9 Conductivity sensors Two-electrode sensors with cell constants k = 0.0 cm or k = 0. cm Application Measurement in pure and ultrapure water: Monitoring ion exchangers
OPTISENS PH 8390 Technical Datasheet
OPTISENS PH 8390 Technical Datasheet ph sensor for water and wastewater industry Large PTFE diaphragm and integrated Pt100 Robust sensor design for harsh applications Low maintenance costs and a long life
Electromagnetic Flow Transmitter
Electromagnetic Flow Transmitter Sensor in solid state technology Working as a transmitter and/or as an On/Off controller Automatic-calibration of full scale: Teach-In Clean in place (CIP) Type can be
Signet 2750 DryLoc ph/orp Sensor Electronics
Signet 2750 DryLoc ph/ Sensor Electronics Features In-line integral mount and submersible installation versions Automatic temperature compensation Auto configuration for ph or operation In-line 2750 Submersible
Memosens CPS96D. Technical Information
Technical Information Memosens CPS96D Combination of ph and ORP electrode with Memosens technology With open aperture junction for very contaminated media and suspended solids Resistent to poisoning reference
Quick Start Guide LIQ-QSG-226, Rev F June Rosemount 226. Toroidal Conductivity Sensors
Quick Start Guide LIQ-QSG-226, Rev F June 2017 Rosemount 226 Toroidal Conductivity Sensors Safety Information WARNING! HIGH PRESSURE AND TEMPERATURE HAZARD Before removing the senosr, reduce the process
Signet ph/orp Transmitter * *
Signet 8750-3 ph/orp *3-8750.090-3* 3-8750.090-3 Rev. G 0/06 English English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury.
Measuring and Controlling Unit Multronic
Measuring and Controlling Unit Multronic Modular system Up to 3 measurement variables with control functions in one housing Free combination of the measurement variables ph / Redox / temperature / conductivity
General Purpose Toroidal Conductivity Sensors
Product Data Sheet PDS 71-226/228/revE December 2009 Model 226 and 228 General Purpose Toroidal Conductivity Sensors NON-CONTACTING (TOROIDAL) SENSORS resist corrosion and fouling SENSORS ARE IDEAL for
Conductivity Transmitter
Conductivity Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma Removable backlighted display Universal process connection Type can be combined with... Three cell constants
Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.
Technical Information Condumax W CLS9 Conductivity sensors Two-electrode sensors with cell constants k = 0.0 cm or k = 0. cm Application Measurement in pure and ultrapure water: Monitoring ion exchangers
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
New Technology for Monitoring Cycle Chemistry. David M. Gray McIlvaine Hot Topic Hour February 21, 2013
New Technology for Monitoring Cycle Chemistry David M. Gray McIlvaine Hot Topic Hour February 21, 2013 Outline Sensor developments Measurement parameters - Conductivity - ph/orp - Dissolved oxygen - Sodium
Level gauges Series LT Level indicator, switch and transmitter for liquids
Level gauges Series LT Level indicator, switch and transmitter for liquids Simple construction Resistant under extreme temperature and pressure conditions No risk of leakage Excellent chemical resistance
OPTISENS PH ph sensor. Technical Datasheet
Technical Datasheet ph sensor High quality and precise glass sensor for usage in water and waste water analysis Special sensor design for harsh applications Low maintenance costs and a long life cycle
HBPH-MK2 Brine/NH3 Leakage Sensor
INSTRUCTION MANUAL HBPH-MK2 Brine/NH3 Leakage Sensor DIFFERENTIAL 2-WIRE (4-20 ma) ph Sensor TABLE OF CONTENTS General Information... 2 Specifications... 2 Installation... 3 Cold Liquid applications...
Non-Submersible Industrial Pressure Transducer
Non-Submersible Industrial Pressure Transducer KPSI Transducers Series 27, 28, 30 FEATURES Custom Pressure Ranges up to 2000 (13,790 kpa) Accuracy to ±0.10% FS Analog Outputs of 4-20 ma or VDC Welded 316
JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
sales@jumo.co.uk info.us@jumo.net Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g.
OPTISENS PH 8100 Technical Datasheet
OPTISENS PH 8100 Technical Datasheet ph sensor High quality and precise glass sensor for usage in low conductivity media High temperature resistency Suitable for application in chemical industry The documentation
Lengths [7] Ø.50 [13] [7] [13]
![Lengths [7] Ø.50 [13] [7] [13]](/thumbs/80/81567338.jpg "Lengths [7] Ø.50 [13] [7] [13]")
Dimensions in [ ] are in millimeters Standard (2 1 / 2 6 ) Standard (9 24 ).75 STEM.40 [10] EXTERNAL THREAD.61 [15] 1.00 [25] STEM STEM Ø.44 [11] Threaded-Stepped Shank Standard Stem Length Length (T)
Tank wall mount kit LZX
DOC273.52.00152.Jul07 Tank wall mount kit LZX414.00.70000 Instruction Sheet Edition 1 July 2007 wc/kt HACH LANGE GmbH, 2007. All rights reserved. Printed in Germany. Instruction Sheet Tank wall mount kit
Amer Technical Information TI 312e00 Solids Content Sensor SAH-T/E Solids Content Sensor for Average Concentrations Using the Light Abso
Technical Information TI 312e00 Solids Content Sensor 51508363 7510 SAH-T/E Solids Content Sensor for Average Concentrations Using the Light Absorption Method The 7510 sensor is used for optical solid
A Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Series 000 Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Series 000 000-SAN Cable with separate electronics Description
Condumax CLS21 and CLS21D
Technical Information Condumax CLS21 and CLS21D Conductivity sensors, analog or digital with Memosens technology Cell constant k = 1 cm -1 Application Measurements in media of medium and high conductivities:
Condumax W CLS15 and CLS15D
Technical Information Condumax W CLS15 and CLS15D Conductivity sensors, analog or digital with Memosens technology, Cell constant k = 0.01 cm -1 or k = 0.1 cm -1 Application Measurement in pure and ultrapure
Parts List 4 MODEL T-18 and T-27 Mark II Turbo-Meters
MP-1070A Rev. 9 Invensys Energy Metering 80 Liberty Boulevard DuBois, PA 15801 Telephone (814) 371-8000 FAX (814) 375-8460 Parts List 4 Model T-18 and T-27 Mark II Turbo-Meter Parts List 4 MODEL T-18 and
BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
Condumax CLS15 and CLS15D
Technical Information Condumax CLS15 and CLS15D Conductivity sensors, analog or digital with Memosens technology, Cell constant k = 0.01 cm -1 or k = 0.1 cm -1 Application Measurement in pure and ultrapure
C4E NUMERICAL SENSOR User manual
C4E NUMERICAL SENSOR User manual Distributed & Supported By: Edaphic Scientific Pty Ltd www.edaphic.com.au info@edaphic.com.au Ph: 1300 430 928 1 Version 1.0 CONTENTS 1. GENERAL...3 2. CHARACTERISTICS...4
Magnetic level indicators made in Australia under licence to Weka AG of Switzerland.
ABN 24 080 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0)2 9542 8977 fx: +61 (0)2 9542 7978 www.controlcomponents.com.au Magnetic level indicators made in Australia under licence to
G SERIES PRECISION METERS
Precision Meters PRECISION METERS The High Precision Meter line is the most accurate of the FLOMEC Turbine Meters and includes a traditional design. These meters come in a variety of sizes and fitting
B Operating Instructions V1.00/EN/
Conductive conductivity/ultra-pure water sensors with a 2-electrode system, types 202922, 202923, 202924, 202925 Glass conductivity sensors, type 202922/30 Diaphragm tubes, type 201083 Compensation thermometer,
Condumax CLS15 and CLS15D
Technical Information Condumax CLS15 and CLS15D Conductivity sensors, analog or digital with Memosens technology, Cell constant k = 0.01 cm -1 or k = 0.1 cm -1 Application Measurement in pure and ultrapure
STANDARD RTD's INDEX
STANDARD RTD's INDEX PAGE General Information... R2 Temperature/Resistance Table... R6 Part Numbering Examples... R10 High Temperature MgO Elements (RA)... R11 Leadwire Style RTD's (RB)... R12 Leadwire
FIELD DEVICES - ANALYTICAL
FIELD DEVICES - ANALYTICAL Product Specifications Logo PSS 6-1C2 B Model 871A ph and ORP Sensors and Accessories The Foxboro brand 871A Electrochemical Sensors, when used with 871A Accessories, are suitable
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
Flow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on Faraday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
ORP100 Sensor. Edition 1.0. User Manual
ORP100 Sensor Edition 1.0 User Manual +61 746 601888 Greenspan Customer Service Technical Support When You Need It The correct choice of sensor should be supported by professional advice to ensure long
DeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks
Series Cables... - Cordset Accessories... - Receptacles... 6-9 Receptacle Accessories. 0- Junction Blocks... -6 L- Mencom Corporation MencomConnectors.com TEL: 770--8 Ph: 800-966- www.mencom.com Series
Metal Finishing. W600 Series Controllers. Summary of Key Benefits
Metal Finishing W600 Series Controllers The W600 series provides reliable, flexible and powerful control for your electroless plating or etching process Summary of Key Benefits Large touchscreen display
Magnetic Flowmeter Systems
Series 8700 Magnetic Flowmeter Systems THE 8700 SERIES... Model 8712 C/U - Easiest to use local operator interface and works with any manufacturer s flowtubes Model 8712H/8707 High-Signal System - Pulsed
Remote Controlled FOUNDATION Fieldbus Two-Wire ph/orp Transmitter
Model 4081 ph/orp Product Data Sheet PDS 71-4081P February 2000 Remote Controlled FOUNDATION Fieldbus Two-Wire ph/orp Transmitter REMOTE COMMUNICATION IS SIMPLE; use the hand-held infrared remote controller,
Micro-Change. Cordset Family
Side Tab Cordset Family Small Space? Big Solution. When space and time are in short supply, look no further than Brad Harrison brand for the best, ready-made m connector solutions. For fast, compact migration
SITRANS F flowmeters SITRANS F M. Flow sensor MAG /48 Siemens FI Overview
Siemens AG 2009 Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration
SRS SEALED ROTARY SENSORS
SRS SEALED ROTARY SENSORS Innovation In Motion INNOVATION IN MOTION Penny+Giles SRS280 sealed rotary sensors and SRS880 submersible rotary sensors have been specially developed to provide maximum performance
Valve Island with Electronic I/O
Screw in Temperature /Switch with display for ON/OFF Control Indication, monitoring, transmission and ON/OFF control in one device Extra large display Menu guided parametrisation Complete communication
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
Technical Information Orbipore CPS91D and CPS91
TI00375C/07/EN/14.15 71299929 Products Solutions Services Technical Information Orbipore CPS91D and CPS91 ph electrodes, analog or with digital Memosens technology With open aperture for contaminated media,
DATASHEET AIR / FLUE GAS TEMPERATURE SENSOR. TSD2-Series
AIR / FLUE GAS TEMPERATURE SENSOR TSD2-Series FEATURES Direct measurement Stainless steel tube Short response time -20... EN 60730-2-9 approved DATASHEET OPTIONS Dual sensor (2 x NTC/Pt) O-ring Bayonet
Flow Measurement SITRANS F M. Flow sensor MAG /49. Overview
Siemens AG 2010 Flow Measurement Overview Mode of operation The flow measuring principle is based on Faraday s law of electromagnetic induction according to which the sensor converts the flow into an electrical
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
Differential ph Design Overcomes Common ph Sensor Challenges
APPLICATION NOTE Differential ph Design Overcomes Common ph Sensor Challenges Conventional ph Measurement Methodology All ph measurement systems operate on the principle of an electrochemical cell; that
871PH Series ph and ORP Sensors and Accessories
Product Specifications 871PH Series ph and ORP Sensors and Accessories PSS 6-1C2 A 871PH Series rebuildable, precision electrochemical sensors, used in conjunction with 871PH accessories, are suitable
Magnetic-Inductive flow Meter fmi
1 Product information fmi-c, fmi-r f o o d P H A R M A Magnetic-Inductive flow Meter fmi Application/Specified usage Magnetic-inductive flowmeter for the measurement of flow rate and volume in food and
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
ABB conductivity analyzer and probe package
Water Technologies & Solutions fact sheet ABB conductivity analyzer and probe package series AX430 single input analyzer with PID control description and use Advanced measuring capabilities Conductivity
Industrial Conductivity (Electric Conductivity) Detector
Industrial Conductivity (Electric Conductivity) Detector / (General Multi-Purpose Use) R/R (Compact Ultra-Pure Water Use) S (Intrinsically Safe) The -electrode type industrial conductivity (electric conductivity)
Electromagnetic Flow Measuring System Two-wire, loop-powered PROline promag 23 H
Technical Information TI 051D/06/en 50097004 Electromagnetic Flow Measuring System Two-wire, loop-powered PROline promag 23 H Flow measurement in hygiene, food and beverage or process applications Features
How to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
B Operating Instructions /
Conductivity/ultra-pure water measuring cells with a twin-electrode system Types 202922, 202923, 202924 and 202925 Glass conductivity cells, type 201080 Diaphragm tubes, type 201083 Compensation thermometer,
INSERTION paddle wheel flowmeter for continuous flow measurement
INSERTION paddle wheel flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both
Conductivity Measuring Cells for High-Temperature Applications ConduMax H CLS 16
Technical Information TI 7C//ae Conductivity Measuring Cells for High-Temperature Applications Two-electrode measuring sensors with fixed cable or connector version with integrated temperature sensor Cell
NEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/4" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
General Specifications
General Specifications SENCOM FU20F / SC25F Digital ph/orp-sensor Yokogawa s SENCOM (SENsor COMmunication) technology allows sensors to transmit and receive data when connected to Yokogawa s FLXA21 two-wire
Condumax W CLS15 and CLS15D
Technical Information Condumax W CLS15 and CLS15D Conductivity sensors, analog or digital with Memosens technology, Cell constant k = 0.01 cm -1 or k = 0.1 cm -1 Application Measurement in pure and ultrapure
7110 MTF-FG 7110 MTF Measuring system Examples for complete measuring systems 7110 MTF or 7301 GWT with 7510 SAM-E Measuring system 7110 MTF or 7301 G
Technical Information TI 313e00 Solids Content Sensor 51508361 7510 SAM-T/E Solids Content Sensor for Average Concentrations using the Light Absorption Method The 7510 SAM sensor is used for optical solids
OPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech