4.00 ULTRASONIC ANALYZER

Transcription

1 U.S. PRICE LIST PAGE 1 OF 14 ULTRASONIC IN-LINE ANALYZER FOR LIQUIDS EVALUATION UNIT (1) BINARY LIQUIDS /2-19" Rhosonics Model 8100 (19" rack - basic analyzer - 1 x sensor input) $9, BENCHTOP Rhosonics Model 8100 (Bench Top - basic analyzer - 1 x sensor input) $10, WPF Rhosonics Model 8100 (Wall Mount - basic analyzer - 1 x sensor input) $10, /2-19" Rhosonics Model 8200 (Wall Mount - basic analyzer - 2 x sensor input) $13, This is the basic analyzer for analyzing binary liquids. NOTE EVALUATION UNIT (2) TERNARY LIQUIDS 8100D-CD-S-1/2-19" Rhosonics Model 8100 (19" rack - basic analyzer - 1 x sensor input) $12, NOTE This is a special analyzer for analyzing ternary liquids (ie: solutions with 1 x acid 1 x salt and 1 x water). EVALUATION UNIT (3) SPECIAL APPLICATIONS 8200D-1/2-19" Rhosonics Model 8200 (19" rack - basic analyzer - 2 x sensor input) $12, NOTE The Model 8200D is a two channel analyzer capable of analyzing 2 components (ie: the first probe is measuring the concentration in a binary solution. The second probe measures the same solution, after a third component is added. The analyzer determines the concentration of the third component, based on the measurement results of the first probe and the additional results of the second probe.

2 U.S. PRICE LIST PAGE 2 OF 14 EVALUATION UNIT (4) ULTRASONIC IN-LINE FOR GASES 8100G-1/2-19" Rhosonics Model 8100 (19" rack - G-2 x MCS sensor input) $23, NOTE This unit measures the density of the molecular weight of gases. Applications include the measurement of density mixtures of hydrocarbons (H 2, CH 4, C 2 H 6, ETC.). Other applications are the concentration in binary gases. The system is temperature compensated and does not need any pressure device. SENSORS FOR VARIVENT FLOW CELL & FLOW-THROUGH FLOW CELL (1) MP54-SEP-IP68T PROBE Rhosonics sensor for VariVent flow (not included with PT100) $3, MKS S Standard cable set for MP54 probe with connectors (20 meters) $ Price per extra meter $5.70 SENSORS FOR VARIVENT FLOW CELL & FLOW-THROUGH FLOW CELL (1) MP42-IP68T PROBE Rhosonics sensor (Tri-clover flange with hinged clamp - with PT100) $3, C L Rhosonics flow-through cell for MP42 sensor (material: AISI 316L) $ C-4842-CPVC Rhosonics flow-through cell for MP42 sensor (material: CPVC) $ MK-MP (SET OF 10) Standard cable set for MP42 probe with connectors (10 meters) $3, Price per extra meter $5.70 SENSOR FOR VESSEL, TANK, AND PIPE (2) MP130-DN40-PN40 PROBE Rhosonics sensor with DN40 and PN40 flange (with PT100) $4, MKS S Standard cable set for MP130 probe with connectors (20 meters) $710.00

3 U.S. PRICE LIST PAGE 3 OF 14 SENSOR FOR VESSEL, TANK, AND PIPE (2) --- Price per extra meter $9.30 SENSOR FOR VESSEL, TANK, AND PIPE CONSISTING OF TWO INDEPENDENT SENSORS (3) MCS-1 EX SENSOR Rhosonics 2 x cell sensors (1" NPT - AISI 316L) $1, MCS-1T-EX SENSOR Rhosonics 2 x cell sensors (1" NPT - AISI 316L with PT100 explosion proof) $2, MK-MCS (SET OF 20) Standard cable set for MCS sensor with connectors (20 meters) $ Price per extra meter $5.70 MK-MCS (SET ARM-20) Armored cable set for MCS sensor with connectors (20 meters) $1, Price per extra meter $12.00 PIPE SENSOR - FLOW-THROUGH SENSOR SYSTEM (4) MCS-FTS-1DN40-PN40C Flow-through flow DN40 and PN40 with 2 x sensors and PT100 explosion proof $3, MK-MCS (SET OF 20) Standard cable set for MCS sensor with connectors (20 meters) $ Price per extra meter $5.70 MK-MCS (SET ARM-20) Armored cable set for MCS sensor with connectors (20 meters) $1, Price per extra meter $12.00 HCL RESISTANT COATING Internal coating of the sensor On Request HF RESISTANT COATING Internal coating of the sensor On Request

4 U.S. PRICE LIST PAGE 4 OF 14 MEASURING CELLS FOR MCS SENSOR SYSTEM (5) MC-1-8 Ultrasonic measuring cell ¼ connectors (AIS 316L - 2 x sensors MCS) $ MFC-1-DN25-PN16 Flow-through flow DN25 PN16 flange (AIS 316L - 2 x sensors MCS) $1, SPECIAL DESIGN SENSOR - ULTRASONIC IN-LINE FLOW CELL PEEK-ZERO INTRUSION (6) MCS-FTS-WT-PEEK-2" Wafer type - 2", 150 lb. flange (zero intrusion cell) $4, MCS-FTS-WT-PEEK-3" Wafer type - 3", 150 lb. flange (zero intrusion cell) $4, MCS-FTS-WT-PEEK->3" Wafer type - >3", 150 lb. flange (zero intrusion cell) On Request MP-MK-20 Standard cable set (MCS, FTS, WR, PEEK Probe - 20 meters) $ ALCOHOL MONITOR 8100-BM Rhosonics Model 8100 (19" rack): Input sonic sensor MP54 Input density sensor DMT-ES-8100 Input CO 2 compensation $9, MP54-SEP-IP68T PROBE Rhosonics sensor for VariVent flow (not included) with PT100 $4, MKS S Standard cable set for MP54 probe with connectors (20 meters) $ Price per extra meter $5.70 DMT-ES-8100 Density measuring cell $8, MKS-DMT-ES Standard cable set for DMT ES 8100 probe (20 meters) $ Price per extra meter $5.70 PROCESS SAMPLE ADAPTER Adapter - VariVent connection for density analysis (DMT ES) $1, FLEXIBLE PTFE Flexible PTFE line connecting hose to sample adapter (DMT ES) $530.00

5 U.S. PRICE LIST PAGE 5 OF 14 ALCOHOL ANALYZER RHO 8100INT XX Remote set function $1, RHO 8100INT XX Recording and logging (wave form viewing) $1, RHO 8100INT XX Wave form viewing $ RHO 8100RMSL Remote selector for liquids selection $1,190.00

6 U.S. PRICE LIST PAGE 6 OF 14 EVALUATION UNIT - DESCRIPTION AND TECHNICAL FEATURES INPUTS SOFTWARE & CALCULATIONS READOUT OUTPUTS HOUSING RHOSONICS MODEL 8100 ½ - 19" ULTRASONIC IN-LINE ANALYZER FOR LIQUIDS (1) Input for MCS sensor pair or MP-type probe Temperature input for 4-wire PT100's Storage of 30 liquids with dual calibration Calculation of concentration Transit-time, temperature, speed, and attenuation On main screen with large characters Two concentration values with names and units Two independently programmable 4-20 ma Outputs for concentration and temperature Two high-low limit alarms (SPDT, 240 VAC, and 3A) 2 x RS232 interface ½ - 19" rack (Voltage: VAC) INPUTS SOFTWARE & CALCULATIONS READOUT OUTPUTS HOUSING RHOSONICS MODEL 8100 BENCH TOP ULTRASONIC IN-LINE ANALYZER FOR LIQUIDS (1) Input for MCS sensor pair or MP-type probe Temperature input for 4-wire PT100's Storage of 30 liquids with dual calibration Calculation of concentration Transit-time, temperature, speed, and attenuation On main screen with large characters Two concentration values with names and units Two independently programmable 4-20 ma Outputs for concentration and temperature Two high-low limit alarms (SPDT, 240 VAC, and 3A) 2 x RS232 interface Bench top housing with stand (Voltage: VAC)

7 U.S. PRICE LIST PAGE 7 OF 14 INPUTS SOFTWARE & CALCULATIONS READOUT OUTPUTS HOUSING RHOSONICS MODEL 8100 WPF ULTRASONIC IN-LINE ANALYZER FOR LIQUIDS (1) Input for MCS sensor pair or MP-type probe Temperature input for 4-wire PT100's Storage of 30 liquids with dual calibration Calculation of concentration Transit-time, temperature, speed, and attenuation On main screen with large characters Two concentration values with names and units Two independently programmable 4-20 ma Outputs for concentration and temperature Two high-low limit alarms (SPDT, 240 VAC, and 3A) 2 x RS232 interface IP66 wall mount (300 W x 400 H x 210 D/Voltage: VAC) INPUTS SOFTWARE & CALCULATIONS READOUT OUTPUTS HOUSING RHOSONICS MODEL 8200 ½ ULTRASONIC ANALYZER FOR SPECIAL APPLICATIONS (1) Input for 2 each MP-type probes Temperature input for 4-wire PT100's Storage of 30 liquids with dual calibration User-programmable conversion of external signal Calculation of concentration and temperature for each channel Transit-time, temperature, speed, and attenuation Value of converted 4-20 ma input On main screen with large characters Two concentration values with names and units Two independently programmable 4-20 ma 4-20 ma outputs for concentration Two high-low limit alarms (SPDT, 240 VAC, and 3A) 2 x RS232 interface ½ - 19" rack mount housing (Voltage: VAC)

8 U.S. PRICE LIST PAGE 8 OF 14 INPUTS SPECIAL CALCULATIONS READOUT DETAIL SCREEN OUTPUTS HOUSING RHOSONICS MODEL 8100-D-CD-S IN-LINE ANALYZER FOR TERNARY LIQUIDS (2) Input for Ultrasonic MCS sensor pair or MP-type probe Temperature input for 4-wire PT100's (Range: 0-45 C) 4-20 ma input for external sensor Integral power supply for conductivity controller Conversion of measured parameters into concentrations Automatic temperature compensation On main screen with large characters Concentration of... (fill in: name of...acid) Concentration of... (fill in: name of...salt) Transit-time, temperature, speed, etc. Attenuation and conductivity Two independently programmable 4-20 ma 4-20 ma outputs for concentration Two high-low limit alarms (SPDT, 240 VAC, and 3A) 2 x RS232 interface ½ - 19" rack mount housing (Voltage: VAC) INPUTS SOFTWARE & CALCULATIONS READOUT OUTPUTS RHOSONICS MODEL 8200-D ½ ANALYZER FOR SPECIAL APPLICATIONS (3) Input for 2 each MP-type probe Temperature input for 4-wire PT100's 4-20 ma input for external sensor Storage of 30 liquids with dual calibration User-programmable conversion of external signal Dual polynomial equation (for 2 components) Transit-time, temperature, speed, and attenuation Value of converted 4-20 ma input On main screen with large characters Two concentration values with names and units Two independently programmable

9 U.S. PRICE LIST PAGE 9 OF 14 HOUSING RHOSONICS MODEL 8200-D ½ ANALYZER FOR SPECIAL APPLICATIONS (3) 4-20 ma outputs for concentration Two high-low limit alarms (SPDT, 240 VAC, 3A) 2 x RS232 interface ½ - 19" rack mount housing (Voltage: VAC) INPUTS SOFTWARE & CALCULATIONS READOUT OUTPUTS HOUSING RHOSONICS MODEL 8100-GI ULTRASONIC IN-LINE ANALYZER FOR GASES Input for MCS sensor Temperature input for 4-wire PT100's Storage of gas polynomial Calculation of density or molecular weight Transit-time, temperature, speed, and attenuation On main screen with large characters Molecular weight and temperature Two independent 4-20 ma outputs Density and/or temperature Two high-low limit alarms (SPDT, 240 VAC, 3A) RS422/RS482/RS232 interface IP-24 EMC closed housing (Voltage: VAC)

10 U.S. PRICE LIST PAGE 10 OF 14 SENSORS - DESCRIPTION AND TECHNICAL FEATURES MP-54-SEP-IP68-T ULTRASONIC PROBE FOR RHOSONICS (1) With built-in 4-wire PT100 VariVent process connection A-septic Material: AISI-316 IP68 Maximum temperature: +160 C Maximum pressure: 16,000 hpa With calibration data sheet MKS S Standard cable set for MP-probe 1 x coaxial cable (shielded) 1 x temperature cable (shielded) Length: 20 x meters each Completely fitted with connectors on both sides MP-42-IP68-T ULTRASONIC PROBE FOR RHOSONICS (1) With built-in 4-wire PT100 Materials (in process): AISI-316L Materials (other): AISI-316L Tri-clover flange with hinged clamp Teflon sealing ring With calibration sheet Complete with IP65 electrical connection C L FLOW-THROUGH SAMPLE CELL FOR MP-42 SERIES PROBE Material: AISI-316L stainless steel Probe connection: 2" tri-clamp Process connection: 1/8" NPT female thread (other connections are available upon request) Maximum pressure: 25,000 hpa

11 U.S. PRICE LIST PAGE 11 OF 14 C L FLOW-THROUGH SAMPLE CELL FOR MP-42 SERIES PROBE Tri-clover flange with hinged clamp Teflon sealing ring C-4842-CPVC FLOW-THROUGH SAMPLE CELL FOR MP-42 AND MP-48 SERIES PROBES Material: CPVC Probe connection: 2" tri-clamp Process connection: 3/8" BSP-PT female thread Maximum temperature: 90 C Maximum pressure: 10,000 hpa MK-MP-SET-10 Cable set for MP probes Double shielded coaxial cable Shielded temperature cable Length: 10 meters Fitted with connectors on instrument side MP-130-EX-DN40-PN40-T ULTRASONIC PROBE WITH FLANGE (2) With built-in PT100 Accuracy: DIN/IEC 751 Class A DN40/PN40 flange Insertion depth: 190 mm Material: AISI-316L Maximum temperature: +160 C Maximum pressure: 25,000 hpa With calibration sheet Complete with explosion-proof housing Ex. Acc. Eex-d-IIC-T6...T3

12 U.S. PRICE LIST PAGE 12 OF 14 MKS S STANDARD CABLE SET FOR MP-PROBE 1 x coaxial cable (shielded) 1 x temperature cable (shielded) Length: 20 x meters each Completely fitted with connectors on both sides MCS-1-EX (CONSISTING OF 2 SENSORS) ULTRASONIC CELL SENSOR (3) 1" NPT process connection Material: AISI-316 Maximum temperature: +160 C Maximum pressure: 220,000 hpa With calibration sheet Complete with explosion-proof housing Ex. Acc. Eex-d-IIC-T6...T3 MCS-1-T-EX ULTRASONIC CELL SENSOR WITH TEMPERATURE SENSOR With built-in PT100 (acc. 1/5 DIN/IEC 751 Class B ) 1" NPT process connection Material: AISI-316 Maximum temperature: +160 C Maximum pressure: 220,000 hpa With calibration sheet Complete with explosion-proof housing Ex. Acc. Eex-d-IIC-T6...T3 MCS-FTS-1-DN40-PN40-C ULTRASONIC MEASURING FLOW-THROUGH CELL (4) Material: AISI 316L (WNR ) Cell with integral sensors and PT100 Seamless design 2 each - DN40-PN40 flange (Form C ) Maximum temperature: +160 C Maximum pressure: 40,000 hpa

13 U.S. PRICE LIST PAGE 13 OF 14 MCS-FTS-1-DN40-PN40-C ULTRASONIC MEASURING FLOW-THROUGH CELL (4) With calibration sheet Complete with explosion-proof housing Ex. Acc. Eex-d-IIC-T6...T3 OPTIONS FOR MCS-FTS (HCI RESISTANT INTERNAL COATING OF SENSOR WITH POLYMER COMPOSITE) Suitable for 0 to 37% (HCI up to T = 70 C) Coating includes flange surfaces OPTIONS FOR MCS-FTS (HF RESISTANT INTERNAL COATING OF SENSOR WITH POLYMER COMPOSITE) Suitable for 0 to 80% (HF at ambient temperature) Coating includes flange surfaces MK-MCS-SET-20 STANDARD CABLE QUALITY Cable set for pair of MCS and MCS-FTS probes 2 each of double shielded coaxial cable Shielded temperature cable Length: 20 x meters each Fitted with connectors on instrument side MK-MCS-SET-ARM-20 Cable set for pair of MCS probes and MCS-FTS probes 2 each of double shielded coaxial cable (heave duty sheathed) Shielded temperature cable (heavy duty sheathed) Length: 20 meters each Fitted with connectors on instrument side NOTE This cable should only be used in chemical plants, and/or for sensor installations in the open air. MC-1-8 ULTRASONIC MEASURING CELL - SUITABLE FOR MCS SENSORS (5) Material: AISI each, sensor connections (1" NPT)

14 U.S. PRICE LIST PAGE 14 OF 14 MC-1-8 ULTRASONIC MEASURING CELL - SUITABLE FOR MCS SENSORS (5) 2 each, ¼ Swagelok connectors for process connection Maximum pressure: 220,000 hpa MFC-1-DN25-PN16-C ULTRASONIC MEASURING FLOW-THROUGH CELL (SUITABLE FOR MCS SENSORS) Material: AISI 316L (WNR ) Sensor connections: 2 each (1" NPT) diametrically Process connections: 2 each DN25-PN16 flange (Form C ) Maximum pressure: 16 bar Other process connections are available upon request MFC-FTS-1EX 2", 150 LB. W-T PEEK IN-LINE SENSOR - ZERO INTRUSION (6) Full bore Wafer type 2 or 3 inches Width: 50 mm OD same as 2 inches lb. flange Integral sensor and PT100 Maximum temperature: 130 C Maximum pressure: 10,000 hpa Explosion-proof Available with 3" version (other sizes are available upon request - 4 to 6 inches)