Dec 2013 Issue 2. Styli and accessories.

Transcription

1 Dec 2013 Issue 2 Styli and accessories for Taylor Hobson INSTRUMENTS Taylor Hobson 2013

2 ontents Styli Form Talysurf PGI styli Recess Forward pointing recess Small bore Miniature bore Nozzle Form Talysurf Inductive styli Recess Forward pointing recess Recess chisel Small bore Miniature bore Wide range styli Recess chisel Recess conical Recess ball Talyrond Talymin 4, 5 & 6 styli Standard ball Ball recess Diamond recess Reach recess Reach Forward pointing recess Nozzle type Nozzle type B Bar ccessories Talyrond Gauge accessories alibration Workholding Furniture Form Talysurf PGI Work holding Form Talysurf Inductive Work holding alibration I ccessories alibration Investment in quality Taylor Hobson has focused their efforts on continually improving their technical capability, through investment in machinery and processes, cementing their position as world leaders in metrology solutions. t the forefront of technical innovation, styli are fundamental to achieving the accuracy and repeatability that our instruments are renowned for. This is why it is essential to only use Taylor Hobson endorsed styli and accessories for optimum performance. ll instruments are available with a range of standard styli, however we are also able to offer complete bespoke styli through our custom stylus design service. We are able to create solutions to problems or simply enhance the performance of existing applications. Each stylus starts life in the Taylor Hobson Stylus Manufacturing ell. The first stage of the process is to manufacture the carbon fibre components using our 5 axis N machining centre, which ensures high accuracy, repeatability and quality. Our dedicated machining centre is capable of producing components to a degree of accuracy unobtainable by conventional machining methods. The next stage is for the individual components to be assembled by our team of highly skilled technicians. Using state of the art fixturing, we are able to achieve unparalleled quality for all standard and bespoke styli. The final stage is for each stylus to undergo a comprehensive list of quality checks using a fully N Optical Profiler, for dimensional verification, parallelism and alignment tests. Styli bought with new instruments are always checked on the actual instrument for even greater confidence. s part of the inspection, styli are checked against calibrated standards to ensure guaranteed performance on instruments in the field. ll images used are for illustrative purposes only. Features and colours may vary. s part of our continuing effort to improve our after sales service, Taylor Hobson now offer an express replacement service for all high volume standard styli, helping to minimise production downtime. lternatively we offer a fixed cost repair service for all our Form Talysurf and Talyrond styli, further helping to reduce running costs.

3 Guidelines Stylus profilometers are often used for two different requirements, surface finish measurement and form (or contour) measurement. When measuring surface finish it is advisable to use a stylus with the smallest tip radius feasible to fully penetrate all of the surface features. The ISO standards dictate the choice of stylus based upon the expected surface finish. ISO 3274 specifies that a conisphere stylus should be used with a tip radius of 2, 5 or 10 μm and a cone angle of either 90 or 60 degrees. It should be noted that some local standards may require a different choice of stylus tip radius. For example, it is common within the automotive industry to use a 5μm radius tip. For measuring form or contour, in some circumstances a ball stylus can have certain benefits over a diamond equivalent. The larger radius acts as a filter, reducing some of the effects of surface finish. The larger tip radius also means that a higher tracking force can be used, ensuring that a good contact is maintained with the surface. Types of styli Ruby Doped Monocrystalline aluminium oxide High hardness & Young s modulus an be polished to a good surface finish Exceptionally smooth surface, good compressive strength and high resistance to mechanical corrosion Silicon Nitride Sintered Polycrystalline an be ground and polished to high diametrical, spherical and surface finish specifications Ideal for soft surfaces such as optically finished aluminium and plastic, as it minimises the attraction of deposits one angle selection Flanking occurs when the slope of the roughness exceeds the angle of the conisphere, the stylus will no longer contact on the spherical tip portion, but on the straight edge (non-measuring surface). This is most clearly evident when measuring a step. Typically the profile will exhibit a radius followed by an angle that corresponds to the stylus flank angle. Our styli are available with a number of different tip cone angles and radii which allow measurement of steep angles. By selecting a suitable ball stylus the possibility of flanking is reduced even further. hisel styli Used to measure steep angled slopes, radii and threads where it would be impractical to use a diamond or a ball stylus. Recess ball styli Useful for measuring features with deep sags or where using a diamond would increase the risk of flanking or marking of delicate surfaces. Dual tip styli Enables measurement of squareness and perpendicularity with a single stylus, greatly reducing measurement cycle times. They are available with diamond or ruby ball. Forward pointing styli Particularly useful for measuring surface finish on angled slopes in bores, so that the stylus tip remains perpendicular to the measurement surface. Miniature bore styli Used in applications with the smallest clearances, in particular gear profiles, small bores and valve guides. Nozzle styli Predominantly used for measuring small blind holes, such as injector nozzles. They have reduced diameter nose pieces to prevent fouling on internal lands.

4 Form Talysurf PGI styli Recess Ø F D Ø 2.0 mm mm B cone angle B (Deg) radius (µm) Shank clearance D (mm) Beam diameter F (mm) Diamond conisphere 155-P Diamond conisphere 155-P Diamond conisphere Diamond conisphere Diamond conisphere 155-P Diamond conisphere Diamond conisphere Ruby ball Ruby ball 155-P Diamond conisphere Si 3 N 4 ball 155-P Ruby ball Ruby ball Ruby ball Ruby ball

5 Form Talysurf PGI styli Forward pointing recess E Ø F D Ø 2.0 mm mm B cone angle B (Deg) radius (µm) Shank clearance D (mm) Shank angle E (Deg) Beam diameter F (mm) 155-P Si 3 N 4 ball 155-P Diamond conisphere

6 Form Talysurf PGI styli Small bore Ø 3.3 mm X G mm L Ø 2.0 mm 0.92 mm B cone angle B (Deg) radius (µm) Stem reach G (mm) distance L (mm) 155-P Diamond conisphere Diamond conisphere

7 Form Talysurf PGI styli Miniature bore Ø 3.3 mm 6.45 mm 1.20 mm B X G mm 0.42 mm cone angle B (Deg) radius (µm) Stem reach G (mm) 155-P Diamond conisphere 155-P Diamond conisphere Nozzle H Ø J Ø 3.3 mm X K G mm B cone angle B (Deg) radius (µm) reach K (mm) Total clearance H (mm) Stem reach G (mm) diameter J (mm) 155-P Diamond conisphere 155-P Diamond conisphere 155-P Diamond conisphere 155-P Diamond conisphere

8 Form Talysurf Inductive styli Recess Ø F D Ø 2.0 mm 2.50 mm B cone angle B (Deg) radius (µm) Shank clearance D (mm) Beam diameter F (mm) 155-P Diamond conisphere Diamond conisphere Diamond conisphere 155-P Diamond conisphere Ruby ball 155-P Diamond conisphere 155-P Diamond conisphere 155-P Diamond conisphere 155-P Diamond conisphere Forward pointing recess E Ø 3.3 mm D Ø 2.0 mm 2.50 mm B cone angle B (Deg) radius (µm) Shank clearance D (mm) Shank angle E (Deg) 155-P Diamond conisphere 155-P Diamond conisphere

9 Form Talysurf Inductive styli Recess chisel Ø 3.3 mm D 2.50 mm B hisel angle B (Deg) radius (µm) Shank clearance D (mm) Diamond chisel 155-P Tungsten carbide chisel Small bore Ø 0.3 mm X G 2.50 mm L Ø 2.0 mm 0.92 mm B cone angle B (Deg) radius (µm) Stem reach G (mm) distance L (mm) 155-P Diamond conisphere 155-P Diamond conisphere

10 Form Talysurf Inductive styli Miniature bore Ø 3.3 mm B G X 6.45 mm 1.20 mm 0.42 mm cone angle B (Deg) radius (µm) Stem reach G (mm) Diamond conisphere 155-P Diamond conisphere 155-P Diamond conisphere

11 Wide range styli Recess chisel Ø 5.0 mm D Ø 1.58 mm B mm hisel angle B (Deg) radius (µm) Shank clearance D (mm) K Tungsten carbide chisel Recess conical Ø 5.0 mm D B Ø 1.58 mm mm cone angle B (Deg) radius (µm) Shank clearance D (mm) K Tungsten carbide Recess ball Ø 5.0 mm D Ø 3.0 mm mm radius (µm) Shank clearance K mm Ruby ball

12 Talyrond Talymin 4, 5 & 6 styli Standard ball 8.35 mm mm radius (mm) 155-P Ruby Ball 155-P Ruby Ball Ruby Ball Sapphire ball Ruby ball 155-P Sapphire ball 155-P30358 * Sapphire ball 155-P Sapphire ball 155-P37074 * Sapphire ball * TM4 stylus Ball recess Ø 4.78 mm D Ø 2.5 mm mm radius (mm) Shank clearance D (mm) 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball

13 Talyrond Talymin 4, 5 & 6 styli Diamond recess Ø 4.78 mm D B mm cone angle B (Deg) radius (µm) Shank clearance D (mm) Diamond conisphere Diamond conisphere Reach recess Ø 3.0 mm Ø 4.78 mm D G mm radius (mm) Shank clearance D (mm) Stem reach G (mm) 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball

14 Talyrond Talymin 4, 5 & 6 styli Reach Ø F Ø 4.78 mm G mm radius (mm) Reach tube diameter F (mm) Stem reach G (mm) 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball 155-P Ruby ball Forward pointing recess Ø H E Ø F Ø 4.78 mm D G mm B Effective length cone angle B (Deg) radius (µm) Shank clearance D (mm) Shank angle E (Deg) Reach tube diameter F (mm) Stem reach G (mm) Shank diameter H (mm) 155-P Tungsten carbide

15 Talyrond Talymin 4, 5 & 6 styli Nozzle type 4.78 mm E Ø J D B Ø F X K mm Effective length cone angle B (Deg) radius (µm) Shank clearance D (mm) Shank angle E (Deg) Stem reach K (mm) Reach diameter F (mm) Stem diameter J (mm) 155-P Diamond conisphere Nozzle type B 2.8 8º Ø 4.78 mm G mm radius (mm) Reach G (mm) Bar 155-P Ruby ball 155-P Ruby ball mm 6.80 mm Ø 1.0 mm Ø 4.78 mm Needle rollers

16 ccessories and calibration Work holding accessories are designed to support the measurement of components. They offer accurate and repeatable positioning, essential to achieving optimum system performance. The fixtures and accessories provide greater flexibility, ease of use and reliability. If our standard styli and accessories do not satisfy your needs, we can customise a solution to exactly match your application. Our team of specialist in house designers have a wealth of experience in providing the most cost effective solutions for any application. alibration standards are essential to achieving optimum system performance. Using a calibration hemisphere ensures that the gauge travels through a large proportion of its range, vital for achieving accurate results. Ball calibration standards are used for calibrating the gauge when measurements of form and surface finish are required. Necessary for use with contour or form software, these calibration standards correct for gain, tip and arcuate motion of the stylus. We are able to offer a traceable calibration certificate using our in house UKS Laboratory on all our standards, providing peace of mind, reliability, accuracy and confidence in the results. We also provide a re-calibration service which helps maintain this performance throughout the products lifetime.

17 Talyrond gauge accessories TM6 carbon fibre drop arm TM4 carbon fibre drop arm Length (mm) Length (mm) 155-P P P P P P Drop arms are used to enable measurement access deep inside components, for example into crankshaft and camshaft bores on automotive components. Please note the for the Talymin 5 gauge used on the TR565 the drop arm length is the length from the gauge connection to tip of the stylus (100 mm length stylus, not included). The extension value is the extra length gained over and above the standard. Minimum bore size to be accessed for measurement is 30 mm. Not compatible with TR385/ P P P P Drop arms are used to enable measurement access deep inside components, for example into crankshaft and camshaft bores. Please note the for the Talymin 4 gauge used on the TR450 the drop arm length is the length from the gauge connection to tip of the stylus (100 mm length stylus not included). The extension value is the extra length gained over and above the standard. The Talymin 4 gauge has a diameter of 23.5 mm. Minimum bore size for practical use is therefore 26 mm. For smaller diameters refer to the small bore drop arm. TM6 gauge extension arm assembly (mm) 155-P This gauge extension arm is used to access small diameters on components with a large swing radius, for example to access the pin bearing on a crankshaft whilst avoiding the counterweight. 150mm stylus is included with the assembly (155-P54248). Please note, the column on the instrument may need to be set to its rear position to accommodate the gauge extension arm (using moulding insert ). Please refer to the applications department with component drawings and measurement requirements for confirmation. Not compatible with TR585.

18 Talyrond gauge accessories Small bore drop arm TR450 rankshaft arm Length (mm) Length (mm) Stylus included 155-P P P P Small bore drop arms are used to enable measurement access deep inside components where the standard drop arms are too large. The small bore drop arm has a built in gauge and can be used in bores down to 21 mm in diameter. Please note the drop arm length is the length from the gauge connection to tip of the stylus (100 mm length stylus). The extension value is the extra length gained over and above the standard. (Includes small bore gauge and stylus.) pplicable models 155-P P P P P P P P P P P * 1230 Not included 155-P * 1310 Not included crankshaft arm offsets the gauge position to clear the swing radius created by the counterweights when measuring the pin or main journals. n extended stylus, also supplied, enables access to the required measurement positions. (Includes stylus.) * Only recommended for 2M instruments Item number TR130 TR131 TR365 TR365XL TR385XL TR565 TR585 TR595 TR P54830 ü ü ü ü 155-P54108 ü ü ü ü 155-P53236 ü 155-P54763 ü 155-P54760 ü 155-P54908 ü 155-P57410 ü 155-P57411 ü

19 Talyrond alibration alibration set Force setting gauge Used to verify stylus force, to prevent scoring and ringing on delicate parts. For use with surface and 3D option. Roughness standard For calibrating the gauge head. The set comprises a circular glass flat and four gauge blocks, (Ø 50 mm, 2.5 mm, 2.8 mm, 2.96 mm, 3.0 mm). Optional UKS calibration certificate available. Flick standard vailable sizes Vertical ircumferential UR Ra 0.35 µm (13.78 µin) Rz 1 µm (39.37 µin) Ra 0.35 µm (13.78 µin) Rz 1 µm (39.37 µin) alibration standard for circumferential and vertical roughness. Traceable international standards resting standard µm (788 µin) µm (0.012 in) For rapid calibration of the gauge head, alternative to the standard gauge calibration set. Optional UKS calibration certificate available. Glass hemisphere standard For checking the vertical and horizontal alignment of the gauge head. Horizontal straightness standard Roundness < 0.05 µm (2 μin) < 0.01 µm (0.4 μin) For checking total system performance. Optional UKS calibration certificate available. vailable sizes Ø 250mm (10 in) Flatness 633 Nm) Ø 350mm (13.7 in) Flatness 633 Nm) For checking the straightness and alignment of the horizontal arm with respect to the spindle axis. Optional UKS calibration certificate available.

20 Talyrond alibration Precision test cylinder High precision test cylinder Length Length mm (11.81 in) mm (3.93 in) mm (19.68 in) mm (39.37 in) Roundness Straightness <0.2 µm (7.87) µin <0.2 µm (7.87) µin For checking the instruments vertical straightness accuracy and parallelism of the vertical axis to the spindle axis. Optional UKS calibration certificate available. 300 mm & 500 mm precision test cylinder For verification of the instrument s vertical straightness accuracy and parallelism of the vertical axis to the spindle axis. Optional UKS calibration certificate available. Roundness Straightness <0.25 µm (9.84 µin) <0.50 µm (19.69 µin)* 1000 mm precision test cylinder Roundness Straightness <0.75 µm (29.53 µin) <3.00 µm ( µin)* * Straightness over central 90 % of test cylinder

21 Talyrond alibration Talyrond ball standard Radius Gauge compatibility mm (0.29 in) 2 mm * mm (0.49 in) 2 mm * mm (0.89 in) 2 mm / 4 mm * Talyrond ball calibration standard. Required for use with contour or form software, this calibration standard corrects for the arcuate motion of the stylus. Optional UKS and METS calibration certificates available UKS Roundness uncertainty 0.05 µm (1.97 µin) UKS Diameter uncertainty 0.5 µm (19.69 µin) METS Roundness uncertainty 0.04 µm (1.57 µin) METS Diameter uncertainty 0.05 µm (1.97 µin) * Based on the use of a 90 diamond conisphere stylus. If using smaller or larger cone angles please consult Taylor Hobson to confirm compatibility pplicable models Item number TR130 TR131 SR R50-R80 SR R100 TR365 TR365XL TR385XL TR565 TR585 TR595 TR ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü UR ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü

22 Talyrond Workholding Precision six jaw component chuck Precision collet chuck apacity inside diameter 20 mm 95 mm (0.78 in 3.74 in) apacity outside diameter 2 mm 32 mm (0.08 in 1.26 in) Precision six jaw component chuck. Self centring with removable jaws, can be used internally or externally. Mounts kinematically onto the table top. entring attachment huck part no Precision collet chuck with interchangeable collets (not included). Please select from the list below. ollet part no. Size of collet mm mm mm mm mm mm mm apacity diameter to 151 mm (0.21 to 5.95 in) For fast, repeatable centring of small components up to 4.5 Kg (9.9 lb). Rapid centre attachment mm mm mm mm mm mm mm mm Extras Size 200 mm, max Ø 200 mm, ID centring 70 mm 160 mm, OD centring 3 mm to 90 mm 300 mm, max Ø 300 mm, ID centring 115 mm 200 mm, OD centring 3 mm to 90 mm Three ball type location (for use with manual or automated tables) for quick and easy removal Fixed mounts that bolt directly onto the table top djustable end stop, recommended for use with both precision collect chucks Rapid centre saves valuable cycle time on manual part centring. On most parts precision results are achieved following a very simple and fast loading procedure.

23 Talyrond Workholding pplicable models Item number TR130 TR131 SR R50-R80 SR R100 TR365 TR365XL TR385XL TR565 TR585 TR595 TR ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü

24 Talyrond Furniture Small DPU desk V30 high performance steel table with manual levelling Dimensions 900 mm (L) x 850 mm (W) x 750 mm (H) (35.5 in x 33.5 in x 29.5 in) Dimensions mm (L) x 750mm (W) Purpose designed cabinet with heat management cable management, comes with pull out drawer and cupboard for storage. Surtronic V120 (benchtop active V solution) High performance vibration isolation table. Load capacity up to 160 Kg. V50 with active levelling and pneumatic V Dimensions Dimensions mm (W) x 400 mm (L) x 90 mm (H). State-of-the-art active V isolation table, for bench mounted use. Isolates environmental vibrations from surroundings. Isolation performance >5 Hz = 25 db, >10 Hz = 40 db. Load capacity up to 120 Kg. (Other sizes available on request.) mm (L) x 750 mm (W) High performance vibration isolation table with active V mounts. Load capacity up to 160 Kg. pplicable models Item number TR130 TR131 SR R50-R80 SR R100 TR365 TR365XL TR385XL TR565 TR585 TR595 TR ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü

25 Form Talysurf PGI Work holding Tilt & rotary stage for aspherics Y-axis translation stage Precision stage assembly with Y axis positioning 25 mm (1.0 in) travel and load capacity of 30 Kg (66 lbs). Rotary stage 125 mm (4.9 in) dia with ±30 arc minutes of manual levelling. Motorized Y stage with 100 mm (3.9 in) travel and weight capacity of 20 Kg (44 lbs). Minimum data spacing is 1 μm (40 μin) with slide straightness of 0.75 μm (30 μin) over 100 mm (3.9 in). Levelling stage Y axis table Work surface dimensions mm length x 75 mm width (5.9 in x 2.95 in) Provides 3 tilting adjustment to bring workpiece parallel with the traverse unit. For use with T-slots Rotary tables Precision stage assembly with Y axis positioning and mounting holes for component fixturing. 25 mm (1.0 in) travel and a load capacity of 30 Kg (66 lbs). Platform area is 120 x 120mm (4.7 x 4.7 in). Stage & vee plate assembly PGI blu machine tool chuck fixture llows chucks up to 50mm diameter to be held, simple adjustment, spring loaded plunger. 80 mm lens riser Travel Vee plate size mm / 1 in 90 mm x 90 mm / 3.5 in x 3.5 in Simple stage assembly with Y axis positioning, vee block and location plate for mounting into the T-slots Holds part at optimum measurement height. Measuring close to the cresting height will improve the accuracy and reliability of the results. oncentric rings on the top face to provide quick centring of parts, kinematic location.

26 Form Talysurf PGI Work holding entre & levelling lens holder Tee slot adaptor Platform area Uses an aperture style mechanism for fast, repeatable cantering of small components, predominantly used for use with small lenses. Specification: Maximum work piece weight 4.5 Kg (9.9 lbs) apacity mm diameter ( in) mm x 100 mm (4.7 in x 3.9 in) Offsets the position of the rail slot 125 mm from the original position. Precision vice Vee blocks (pair) Dimensions 63 mm (W) x 85 mm (L) x 32 mm (H) 2.5 in (W) x 3.3 in (L) x 1.3 in (H) Height mm (5.9 in) For the positioning and support of large, cylindrical components. Ball joint vice High carbon steel construction with precision ground faces, 90 degree vee on clamping jaws. Squareness and parallelism mm. Other sizes available upon request. Optical glass flat Dimensions 220 mm (W) x 35 mm (L) x 50 mm (H) 8.7 in (W) x 1.4 in (L) x 2.0 in (H) Total height Jaw opening mm (7.875 in) mm (9 in) Provides universal positioning via 360º turn & rotation and 90º tilt; especially for lightweight or small components. For checking the straightness and alignment of the gauge and traverse unit. lear aperture 200 mm / 7.9 in (L) x 10 mm / 0.4 in (W) Flatness 633 Nm) Parallelism 0.01 mm Optional UKS calibration certificate available.

27 Form Talysurf PGI Work holding pplicable models Item number PGI General PGI Bearings PGI Optics PGI 3D Optics PGI Dimension 1 PGI Dimension ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü

28 Inductive work holding Manual column and stand with cradle mount Ball joint vice Total height Jaw opening mm (7.875 ) mm (9 ) lso requires to level the traverse unit. Used with FTS Intra, 450 mm vertical height adjustment. Vee blocks (pair) Provides universal positioning via 360º turn & rotation and 90º tilt; especially for lightweight or small components. Precision translation stage for X-Y-Ѳ Height mm (5.9 in) For the positioning and support of large, cylindrical components. Precision vice X Y range Z range Vee plate size mm (1 in) 5 mm (0.2 in) 90 mm x 90 mm (3.5 in x 3.5 in) omplete stage assembly to provide X, Y, Z, rotary and tilting positioning moves. Includes vee block and location plate for mounting to the T slot in the granite base. Stage & vee plate assembly Length (mm) mm (W) x 85 mm (L) x 32 mm (H) 2.5 in (W) x 3.3 in (L) x 1.3 in (H) High carbon steel construction with precision ground faces, 90 degree vee on clamping jaws. Squareness and parallelism mm. Other sizes available upon request. Travel Vee plate size mm / 1 in 90 mm x 90 mm / 3.5 in x 3.5 in Simple stage assembly with Y axis positioning, vee block and location plate for mounting in the granite base.

29 Inductive work holding Y axis table Tee slot adaptor For use with T-slots Rotary tables Precision stage assembly with Y axis positioning and mounting holes for component fixturing. 25 mm (1.0 in) travel and a load capacity of 30 Kg (66 lbs). Platform area is 120 x 120mm (4.7 x 4.7 in). Levelling stage Platform area mm x 100 mm (4.7 in x 3.9 in) Offsets the position of the rail slot 125mm from the original position. Small DPU desk Work surface dimensions mm length x 75 mm width (5.9 in x 2.95 in) Provides 3 tilting adjustment to bring workpiece parallel with the traverse unit. Y-axis translation stage Dimensions 900 mm (L) x 850 mm (W) x 750 mm (H) (35.5 in x 33.5 in x 29.5 in) Purpose designed cabinet with optimised heat dissipation and cable management, comes with pull out drawer and cupboard for storage. Length (mm) Motorized Y stage with 100 mm (3.9 in) travel and weight capacity of 20 Kg (44 lbs). Minimum data spacing is 1 μm (40 μin) with slide straightness of 0.75 μm (30 μin) over 100 mm (3.9 in)

30 Inductive work holding pplicable models Item number FTS Intra Ultra FTS Intra ontour FTS Inductive FTS Inductive WR ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü

31 Inductive calibration alibration ball silicon nitride Glass standard single patch vailable sizes vailable sizes mm Radius (0.49 in) mm Radius (0.88 in) RONt Uncertainty 0.10 µm (3.93 µin). Optional UKS calibration certificate available µm Ra µm Ra Other Ra values available on request. Optional UKS calibration certificate available. Glass standard double patch alibration standard 80 mm radius vailable sizes Used for wide range gauge with range > 1 mm. Form accuracy 0.1 µm over central 70. Surface roughness mm cut off. Optional UKS calibration certificate available Line & Ra calibration standard (2.5 µm µm µm) 3 Line & Ra calibration standard (2.5 µm µm µm) Other Ra values and step heights available on request. Optional UKS calibration certificate available. pplicable models Item number FTS Intra Ultra FTS Intra ontour FTS Inductive FTS Inductive WR ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü

32 I accessories and calibration I Joystick Film thickness reference sample For quick access to the instrument controls without the use of the P. utomated X/Y stage Recommended for film thickness measurements. Lateral calibration standard Measurement area alibration certificate mm x 75 mm (4.3 in x 2.9 in ) mm x 150 mm (5.9 in x 5.9 in ) utomated stage with X and Y adjustment. For precise control of workpiece position. I objective lens * Traceable calibration certificate *Recommended as a minimum. Step height calibration standard Magnification Optical resolution Design x 5.4 Michelson x 3.1 Michelson x LWD 3.1 Michelson x 1.3 Mirau x 1.0 Mirau x Mirau x Mirau x Mirau F Plan lens for two beam interferometry plan. vailable in the above magnifcations. Step height alibration certificate * 5 µm µm Traceable calibration certificate Used to verify overall system performance, in conjuction with other calibrated artefacts. vailable with optional UKS calibration certificate.

33 I accessories and calibration alibration flat mirror 0.2 nm RMS alibration certificate Non-traceable calibration certificate Traceable calibration certificate pplicable models Item number I Sunstar RD I Sunstar TFE I Sunstar TF1 I Sunstar SR I Optics TF I Optics D I Optics RM I HD I MP I MP HS ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü

34 Serving a global market Taylor Hobson is world renowned as a manufacturer of precision measuring instruments used for inspection in research and production facilities. Our equipment performs at nanometric levels of resolution and accuracy. To complement our precision manufacturing capability we also offer a host of metrology support services to provide our customers with complete solutions to their measuring needs and total confidence in their results. ontracted Services from Taylor Hobson Inspection services measurement of your production parts by skilled technicians using industry leading instruments in accord with ISO standards Metrology training practical, hands-on training courses for roundness and surface finish conducted by experienced metrologists Operator training on-site instruction will lead to greater proficiency and higher productivity UKS alibration and Testing certification for artifacts or instruments in our laboratory or at customer s site For the above services, contact our enter of Excellence: taylor-hobson.cofe@ametek.com or call: Design engineering special purpose, dedicated metrology systems for demanding applications Precision manufacturing contract machining services for high precision applications and industries Preventative maintenance protect your metrology investment with a Talycare service cover plan For the above services, contact our Sales Department: taylor-hobson.sales@ametek.com or call: Taylor Hobson UK (Global Headquarters) PO Box 36, 2 New Star Road Leicester, LE4 9JQ, England Tel: Fax: taylor-hobson.uk@ametek.com Taylor Hobson France Rond Point de l Epine hamps Batiment D, Elancourt, France Tel: Fax: taylor-hobson.france@ametek.com Taylor Hobson Germany Postfach 4827, Kreuzberger Ring Wiesbaden, Germany Tel: Fax: taylor-hobson.germany@ametek.com Taylor Hobson India 1st Floor, Prestige Featherlite Tech Park 148, EPIP II Phase, Whitefield, Bangalore Tel: Fax: taylor-hobson.india@ametek.com Taylor Hobson Italy Via De Barzi Robecco sul Naviglio, Milan, Italy Tel: Fax: taylor-hobson.italy@ametek.com Taylor Hobson Japan 3F Shiba NBF Tower, , Shiba Daimon Minato-ku Tokyo , Japan Tel: +81 (0) Fax: +81 (0) taylor-hobson.japan@ametek.com Taylor Hobson Korea #310, Gyeonggi R&DB enter, 906-5, lui-dong Yeongtong-gu, Suwon, Gyeonggi, , Korea Tel: Fax: taylor-hobson.korea@ametek.com Taylor Hobson hina Beijing Office Western Section, 2nd Floor, Jing Dong Fang Building (B10) No.10, Jiu Xian Qiao Road, haoyang District, Beijing, , hina Tel: Fax: taylor-hobson.beijing@ametek.com Taylor Hobson hina Shanghai Office Part, 1 st Floor, No. 460 North Fute Road Waigaoqiao Free Trade Zone, Shanghai, , hina Tel: Fax: taylor-hobson.shanghai@ametek.com Taylor Hobson Singapore METEK Singapore, 10 ng Mo Kio Street 65 No Techpoint, Singapore Tel: Ext 120 Fax: Ext 120 taylor-hobson.singapore@ametek.com Taylor Hobson US 1725 Western Drive West hicago, Illinois 60185, US Tel: Fax: taylor-hobson.usa@ametek.com opyright 2013 Taylor Hobson Styli and accessories_en_ Dec