SHANTOU CHENGHAI JINXINGDA PLASTIC TOYS FACTORY
|
|
|
- Elaine Byrd
- 5 years ago
- Views:
Transcription
1 CONSUMER PRODUCTS SERVICES DIVISION Date Received: March 06, 2015 Page 1 of 13 SHANTOU CHENGHAI JINXINGDA PLASTIC TOYS FACTORY CHENGHAI DISTRICT,SHANTOU CITY,GUANGDONG PROVINCE,CHINA Sample Description: REMOTE CONTROL AIRCRAFT SERIES Vendor: N/A Sample Size: 1 Manufacturer: N/A Style No(s): 393V, 388, 389, 390, 391, 391V, 391W, 392, 393, 395, 396, 396V, 396W, 398, 399, 500, 501, 502, 503, 505, 506, 508, 509, 510, 511, 512, 513, 515, 516, 518, 519, 520, 385 Buyer: N/A SKN/SKU No.: N/A Labeled Age Grade: 8+ PO No.: N/A Appropriate Age Grade: NOT REQUESTED Ref #: N/A Client Specified Age 3+ Country of Origin: N/A Grade: Tested Age Grade: OVER 3 YEARS OF AGE Assortment No.: N/A UPC Code: Rated Voltage: 6.00V 3.70V EXECUTIVE SUMMARY: The sample(s) was tested to the following requirement(s) and the data provided is for informational purposes only: - The classification in accordance with standard EN Note: At the requested of the client, EN testing was performed for item 393V. BUREAU VERITAS SHENZHEN CO.,LTD ST/mc Tsang Chi Ho, Steven Manager Electrical Department Bureau Veritas Shenzhen Co., Ltd 4/F, Block B, Minlida Industrial Building, 4th Zone of Honghualing Industrial Park, Xili Town, Nanshan District, Shenzhen, Guangdong, P.R.C. Tel: Fax: This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.
2 Page 2 of 13 SUMMARY OF TEST RESULTS The sample is classified as class 3B Laser Product according to EN Test Executed Test Standard Limit Tests for Classification of Laser Products Sec. 8, Sec. 9, EN : A11: A2: A1: 2002 Table 1, EN : A11: A2: A1: 2002 Remark:
3 Page 3 of 13 Test method and equipment: The following test equipment are applied for the tests: Equip. No Equipment Name Brand Name Model M006003L Digital Light Meter TES TES-1336A M006004L Digital Light Meter Sper Scientific M008005L Digital Caliper (0-12 ) Mitutoyo CD-12 C M008006L Digital Caliper (0-12 ) Mitutoyo CD-12 C M015003L Stainless Steel Ruler (0-12 ) Endo Keiki NIL M019001L Optical Sensor Head Advantest Q82214 M019002L Optical Power Meter + Optical Sensor Interface Unit Advantest Q8221 / Q82203 M019003L Optical Spectrum Analyzer Advantest Q8341 M019004L Optical Sensor Head Advantest Q82214 M019005L Optical Power Meter + Optical Sensor Interface Unit Advantest Q8221 / Q82203 T031001L Laser Test Fixture + Sample Platform NIL NIL T032001L 7mm Sensor Aperture Stop NIL NIL T032003L 0.5mm Field Stop Aperture NIL NIL T032004L 5mm Field Stop Aperture NIL NIL T033001L Filter (Yellow) Lee Filter 101 T033002L Filter (Green) Lee Filter 124 T033003L Filter (Red) Lee Filter 182 T033004L Filter (Blue) Lee Filter 195 The measurements are carried out with the measurement set up following Section 9 of EN The measurement condition 2 specified in Section 9.3 and Table 10 of EN is adopted. Description of the lasers or LEDs under test: Source No. Feature LED 1 LED 2 LED 3 LED 4 LED 5 LED 6 CW / Single-λ / Blue LED at remote control CW / Single-λ / Blue LED at Frame of Aircraft CW / Single-λ / Red LED at Frame of Aircraft CW / Single-λ / Red LED at USB Cable CW / Single-λ / Red LED at Board of Aircraft CW / Single-λ / Blue LED at Board of Aircraft
4 Page 4 of 13 Test Results: I) TESTS DURING OPERATION Basic Parameters of the lasers or LEDs Parameters Unit LED 1 LED 2 LED 3 LED 4 LED 5 LED 6 Color of the laser/led (e.g. Red / Amber / Yellow / Green / Blue, etc.) Blue Blue Red Red Red Blue Wavelength (λ) measured / Given by manufacturer (nm) Time Base estimated (sec) Apparent source size (a) measured Angular subtense (α) estimated Is the laser or LED continuous wave or pulsed? (mm) (mrad) CW CW CW CW CW CW Break Point (T 2) (second)
5 Page 5 of 13 For continuous wave (CW) lasers or LEDs: Note: a laser or LED operating with a continuous output for a period equal to or greater than 0.25 second. A) TESTS AGAINST RETINAL PHOTOCHEMICAL HAZARD (RPH): Parameters Unit LED 1 LED 2 LED 3 LED 4 LED 5 LED 6 Limiting angle of acceptance (γ p) (mrad) N/A N/A N/A 11 Measurement aperture (d) (mm) 7 7 N/A N/A N/A 7 Measurement distance (r) (mm) N/A N/A N/A 14 Exposure time (t) (sec) N/A N/A N/A 100 Radiant power (P) (µw) N/A N/A N/A N/A N/A N/A Radiant energy (Q) (µj) N/A N/A N/A The corresponding RPH AEL for Class 1 Laser µj N/A N/A N/A 8148
6 Page 6 of 13 B) TESTS AGAINST RETINAL THERMAL HAZARD (RTH): Parameters Unit LED 1 LED 2 LED 3 LED 4 LED 5 LED 6 Angle of acceptance (γ) (mrad) Measurement aperture (d) (mm) Measurement distance (r) (mm) Exposure time (t) (sec) Radiant power (P) (µw) Radiant energy (Q) (µj) N/A N/A N/A N/A N/A N/A The corresponding RTH AEL for Class 1Laser µw
7 Page 7 of 13 II) TESTS WITH PARTS SUCH AS LENSES, REFLECTORS OR FILTERS THAT COULD AFFECT FOCUSING REMOVED Basic Parameters of the lasers or LEDs Parameters Unit LED 1 LED 4 Color of the laser/led (e.g. Red / Amber / Yellow / Green / Blue, etc.) Blue Red Wavelength (λ) measured / Given by manufacturer (nm) Time Base estimated (sec) Apparent source size (a) measured (mm) Angular subtense (α) estimated (mrad) Is the laser or LED continuous wave or pulsed? CW CW Break Point (T 2) (second)
8 Page 8 of 13 For continuous wave (CW) lasers or LEDs: Note: a laser or LED operating with a continuous output for a period equal to or greater than 0.25 second. A) TESTS AGAINST RETINAL PHOTOCHEMICAL HAZARD (RPH): Parameters Unit LED 1 LED 4 Limiting angle of acceptance (γ p) (mrad) 11 N/A Measurement aperture (d) (mm) 7 N/A Measurement distance (r) (mm) 14 N/A Exposure time (t) (sec) 100 N/A Radiant power (P) (µw) N/A N/A Radiant energy (Q) (µj) N/A The corresponding RPH AEL for Class 1 Laser µj 8148 N/A
9 Page 9 of 13 B) TESTS AGAINST RETINAL THERMAL HAZARD (RTH): Parameters Unit LED 1 LED 4 Angle of acceptance (γ) (mrad) Measurement aperture (d) (mm) 7 7 Measurement distance (r) (mm) Exposure time (t) (sec) Radiant power (P) (µw) Radiant energy (Q) (µj) N/A N/A The corresponding RTH AEL for Class 1 Laser µw
10 Page 10 of 13 III) TESTS UNDER FAULT CONDTIONS Details: LED 1, LED 2, LED 3: Short circuited of electronic components to maximize the power of LED. LED 4, LED 5, LED 6: Short circuited of electronic components are no significant change of previous result. Basic Parameters of the lasers or LEDs Color of the laser/led Parameters Unit LED 1 LED 2 LED 3 Wavelength (λ) measured / Given by manufacturer (e.g. Red / Amber / Yellow / Green / Blue, etc.) Blue Blue Red (nm) Time Base estimated (sec) Apparent source size (a) measured (mm) Angular subtense (α) estimated (mrad) Is the laser or LED continuous wave or pulsed? CW CW CW Break Point (T 2) (second)
11 Page 11 of 13 For continuous wave (CW) lasers or LEDs: Note: a laser or LED operating with a continuous output for a period equal to or greater than 0.25 second. A) TESTS AGAINST RETINAL PHOTOCHEMICAL HAZARD (RPH): Parameters Unit LED 1 LED 2 LED 3 Limiting angle of acceptance (γ p) (mrad) N/A 11 N/A Measurement aperture (d) (mm) N/A 7 N/A Measurement distance (r) (mm) N/A 34 N/A Exposure time (t) (sec) N/A 100 N/A Radiant power (P) (µw) N/A N/A N/A Radiant energy (Q) (µj) N/A 3741 N/A The corresponding RPH AEL for Class 1 Laser µj N/A 8148 N/A
12 Page 12 of 13 B) TESTS AGAINST RETINAL THERMAL HAZARD (RTH): Parameters Unit LED 1 LED 2 LED 3 Angle of acceptance (γ) (mrad) Measurement aperture (d) (mm) Measurement distance (r) (mm) Exposure time (t) (sec) Radiant power (P) (µw) N/A Radiant energy (Q) (µj) N/A N/A The corresponding RTH AEL for Class 1 Laser µj N/A = Not Applicable
13 Page 13 of 13 (8515) END
GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO,LTD
CONSUMER PRODUCTS SERVICES DIVISION Date Received: April 17, 2018 Page 1 of 12 GUANG DONG XIN YU TECHNOLODY INDUSTRIAL CO LTD LAIMEI INDUSTRIAL ZONE CHENGHAI DISTRICT SHANTOU GUANGDONG Sample Description:
RF Exposure Report. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4) Central Science and Technology Park,Shennan Rd, Nanshan, Shenzhen,China
RF Exposure Report Report No.: FCC ID: Test Model: Series Model: SA150205C14 TE7WR841NXV10 TL-WR841ND TL-WR841N Received Date: Feb. 05, 2015 Test Date: Feb. 16 ~ Mar. 06, 2015 Issued Date: Mar. 11, 2015
RF EXPOSURE REPORT SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD D1W(720P), K3, D2100WH, HD-8500WH
RF EXPOSURE REPORT Applicant Address SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENGHAI SHANTOU GUANGDONG CHINA Manufacturer or Supplier Address Product Brand
RF EXPOSURE REPORT. Sagemcom 250 route de l empereur, Rueil Malmaison,92500, France
RF EXPOSURE REPORT REPORT NO.: SA130806E06B R1 MODEL NO.: F@ST 3284u FCC ID: VW3FAST3284U RECEIVED: July 14, 2014 TESTED: Sep. 23, 2014 ISSUED: Oct. 30, 2014 APPLICANT: ADDRESS: Sagemcom 250 route de l
RF Exposure Report. Report No.: SA180206E02 FCC ID: 2ACH3UKAZA2A0. Test Model: UKAZA2A001. Received Date: Feb. 06, Test Date: Feb.
RF Exposure Report Report No.: SA180206E02 FCC ID: 2ACH3UKAZA2A0 Test Model: UKAZA2A001 Received Date: Feb. 06, 2018 Test Date: Feb. 08, 2018 Issued Date: Feb. 26, 2018 Applicant: ALPS ELECTRIC (NORTH
RF Exposure Report. Report No.: SA160920E06 R2 FCC ID: 2AD8UFW2QADPM01. Test Model: FW2QADPM01. Received Date: Sep. 20, Test Date: Oct.
RF Exposure Report Report No.: SA160920E06 R2 FCC ID: 2AD8UFW2QADPM01 Test Model: FW2QADPM01 Received Date: Sep. 20, 2016 Test Date: Oct. 14, 2016 Issued Date: Sep. 13, 2018 Applicant: Nokia Solutions
TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60825-1 Safety of laser products - Part 1: Equipment classification and requirements Report Number.... : GZES160801248631 Date of issue...
RF Exposure Report SA160715C03. Report No.: PY FCC ID: EX6150v2. Test Model: Received Date: Jul. 11, Test Date: Jul. 15 ~ Aug.
RF Exposure Report Report No.: FCC ID: Test Model: SA160715C03 PY316100334 EX6150v2 Received Date: Jul. 11, 2016 Test Date: Jul. 15 ~ Aug. 02, 2016 Issued Date: Aug. 03, 2016 Applicant: NETGEAR Inc. Address:
RF Exposure Report. Keilaranta 1, Espoo, Finland
RF Exposure Report Report No.: FCC ID: Test Model: SA171102D05 QE9QT1 QT1 Received Date: Nov. 2, 2017 Test Date: Nov. 21 ~ 22, 2017 Issued Date: Nov. 29, 2017 Applicant: Address: Quuppa Oy Keilaranta 1,
RF EXPOSURE REPORT. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
RF EXPOSURE REPORT REPORT NO.: SA121015C19 MODEL NO.: BTS-600 FCC ID: SPYBTS001 RECEIVED: Oct. 15,2012 TESTED: Oct. 23 ~ Oct. 24, 2012 ISSUED: Dec. 20, 2012 APPLICANT: Bitatek CO., LTD ADDRESS: 6F, No.
RF Exposure Report. Report No.: SA170816E06F FCC ID: 2AMAF-DPE109A104A. Test Model: DPE109A. Series Model: DPE104A. Received Date: Feb.
RF Exposure Report Report No.: SA170816E06F FCC ID: 2AMAF-DPE109A104A Test : DPE109A Series : DPE104A Received Date: Feb. 06, 2015 Test Date: Feb. 09 to Sep. 23, 2015 Issued Date: Aug. 31, 2018 Applicant:
JAWIRA TIMUR SDN. BHD.,
SIRIM QAS International Sdn.Bhd. (410334-X) No.1, Persiaran Dato Menteri, Section 2, P.O.BOX 7035, 40700 Shah Alam, Selangor Darul Ehsan, Malaysia. Tel: 03-55446252 Fax: 03-55446272 www.sirim-qas.com.my
TEST REPORT. Building 6, XinXinTian Industrial Park, XinSha Road, ShaJing, Baoan District, ShenZhen, China. Shenzhen Innokin Technology Co.
TEST REPORT Applicant Address Shenzhen Innokin Technology Co., Ltd Building 6, XinXinTian Industrial Park, XinSha Road, ShaJing, Baoan District, ShenZhen, China Manufacturer or Supplier Address Product
Measurement overview
Measurement overview The EU Physical Agents (Artificial Optical Radiation) Directive Meeting Globe Room, Bushy House 23 rd May 2007 Simon Hall NPL Outline Artificial Optical Radiation Directive measurements
CDRH 21 CFR Part 1040 Informative Laser Report
Issued: 2014-03-14 Page 1 of 8 Report Ref. No. 4786277698 CDRH 21 CFR Part 1040 Informative Laser Report 21 CFR Part 1040 (2013-04-01): Performance Standards for Light-Emitting Products Total number of
Author: Rachel Johnston, Carl Paton Date: 09/07/10 Manager: Brent Price
Title: FastSCAN Laser Hazard Analysis Version 3 Controlled Documentation Author: Rachel Johnston, Carl Paton Date: 09/07/10 Manager: Brent Price Summary This document outlines hazard analysis for two WorldStar
TEST REPORT IEC and/or EN Photobiological safety of lamps and lamp systems
Test Report issued under the responsibility of: TEST REORT and/or EN 62471 hotobiological safety of lamps and lamp systems Report Reference No.... : GZES150400337431 Tested by (name + signature)... : Change
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60825-1 Edition 1.2 2001-08 Edition 1:1993 consolidated with amendments 1:1997 and 2:2001 GROUP SAFETY PUBLICATION Safety of laser products Part 1: Equipment classification,
A Global Laser Brand. FireFly Mini
A Global Laser Brand FireFly Mini FireFly Mini Green The new FireFly Mini green range sets a new standard for small industrial grade, green laser diode modules. A radical new design provides TE stabilised
TEST REPORT IEC Photobiological safety of lamps and lamp systems
TEST REORT hotobiological safety of lamps and lamp systems Report Reference No.... : SHES170800821171 Date of issue... : 2017-09-04 Total number of pages... : 15 Testing Laboratory... : Address... : Applicant
Application Note 26. Optical Hazard Measurements with JETI specbos 1211UV
Optical Hazard Measurements with JETI specbos 1211UV Contents 1 Introduction 3 2 Regulations 3 3 Categories of Optical Hazard 3 4 Available Accessories for JETI specbos 1211UV 5 5 Schemes and Peculiarities
BUREAU VERITAS. itaste svd
BUREAU VERITAS TEST REPORT No.: (5213)095-0238 TEST REPORT To: INNOKIN TECHNOLOGY CO., LTD I Fax: I -- Attn: -- I -- I Address: Buildinq 6, XinXinTian Industrial Park, XinSha Road, Sha.Jinq street, ShenZhen,
Guangdong Alpha Animation and Culture Co.,Ltd. MERCEDES-BENZ SLS AMG. Model: LC ( ) Superregenerative Receiver. Report No.
Guangdong Alpha Animation and Culture Co.,Ltd. Application For Certification MERCEDES-BENZ SLS AMG Model: LC258810-8 (6000814) Superregenerative Receiver We hereby certify that the sample of the above
Atlantic. Industrial High Power Picosecond Lasers. features
Atlantic Industrial High Power Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 8 W
L25 Series Operator Manual
L25 Series Operator Manual L25 899-07001-000 L25P 899-07005-000 L25D 899-07002-000 Access Laser Company 917 134 th St SW Ste A1 Everett, WA 98204 425.582.8674 www.accesslaser.com REVISION J TABLE OF CONTENTS
EN RF Test Report
EN 300 440 RF Test Report Report No.: Test Model: RE150707C22B EYAGJN Received Date: Jul. 07, 2015 Test Date: Jul. 14, 2015 Issued Date: Apr. 14, 2017 Applicant: TAIYO YUDEN CO., LTD. Address: 8-1, Sakae-cho,
FireFly Green. It is a self-contained laser that offers the user increased stability over a wide operating temperature and with a faster warm up time.
FireFly Green FireFly Green The FireFly Green range sets a new standard for industrial grade, green laser diode modules. A radically new design provides TE stabilised performance without TE cost and power
Description. Applications CATV forward-path. DFB-1310-P2-xx-A3-xx Predistorted Laser Transmitter REV 007
Description The DFB-1310-P2-xx-A3-xx laser transmitter is designed for high-performance forward-path analog transmission, especially in CATV Hybrid Fiber-Coax (HFC) networks. The transmitter module combines
Description. Features Advanced Multiple Quantum Well (MQW) Fabry-Perot Laser Design Cost-effective Uncooled Laser Technology 5.6-mm TO-style package
Description The series of Multi-Quantum Well (MQW) Fabry-Perot (FP) lasers are well suited for low-cost high-speed transmitters. The devices feature high output power and wide operating temperature range.
L4 Series Operator Manual
L4 Series Operator Manual Access Laser Company 917 134 th St SW, Suite A1 Everett, WA 98204 425.582.8674 www.accesslaser.com L4 Series Operator Manual_Rev_J TABLE OF CONTENTS Section Page Company Statement...
DFS TEST REPORT (WinCE System)
DFS TEST REPORT (WinCE System) REPORT NO.: RF131028E08-4 MODEL NO.: MC32N0 FCC ID: UZ7MC32N0 RECEIVED: Oct. 28, 2013 TESTED: Jan. 02, 2014 ISSUED: Feb. 07, 2014 APPLICANT: Motorola Solutions, Inc. ADDRESS:
Power. Warranty. 30 <1.5 <3% Near TEM ~4.0 one year. 50 <1.5 <5% Near TEM ~4.0 one year
DL CW Blue Violet Laser, 405nm 405 nm Operating longitudinal mode Several Applications: DNA Sequencing Spectrum analysis Optical Instrument Flow Cytometry Interference Measurements Laser lighting show
ISO INTERNATIONAL STANDARD. Ophthalmic instruments Fundamental requirements and test methods Part 2: Light hazard protection
INTERNATIONAL STANDARD ISO 15004-2 First edition 2007-02-15 Ophthalmic instruments Fundamental requirements and test methods Part 2: Light hazard protection Instruments ophtalmiques Exigences fondamentales
Atlantic. Industrial High Power Picosecond Lasers. features
Industrial High Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 6 W output power at
Description. Applications CATV Return-path Analog transmission. DFB-1xxx-C5-2-A-xx-x-x-xx REV 014 APPLIED OPTOELECTRONICS, INC.
Description Features Advanced Multiple Quantum Well (MQW) Distributed Feedback (DFB) Laser Design Low Distortion o IMD2 50 dbc o IMD3 55 dbc RIN < -145 db/hz Cost-effective Uncooled Laser Technology SMSR
Operating longitudinal mode Several Polarization ratio > 100:1. Power. Warranty. 30 <1.5 <5% Near TEM ~4.0 one year
DL CW Blue Violet Laser, 405nm 405 nm Operating longitudinal mode Several Applications: DNA Sequencing Spectrum analysis Optical Instrument Flow Cytometry Interference Measurements Laser lighting show
Infrared light emitting diode, top view type
Infrared light emitting diode, top view type The is a GaAs infrared light emitting diode housed in clear plastic. This device has a high luminous efficiency and a 9nm peak wavelength suitable for silicon
Description. Applications CATV return path CWDM narrowcast and point-to-point applications. DFB-1XXX-BF-xx-A1-xx Laser Module REV 016
Description The DFB-1XXX-BF-xx-A1-xx DFB laser modules are designed for return-path CATV applications. The modules are designed to incorporate high output power while maintaining high linearity. The devices
The Issues of Measurement of Optical Hazard Using Photometers EMRP JRP ENG05 Metrology for Solid State Lighting
The Issues of Measurement of Optical Hazard Using Photometers EMRP JRP ENG05 Metrology for Solid State Lighting Simon Hall,Paul Miller, Neil Haigh, Ben Thornton, Neil Haigh (Lux TSI) 25 th April 2013 Background
IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC,
F IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC, LC/UPC) 1. GENERAL This specification covers the requirements of the standard attenuator for single mode optical fiber to be supplied to TOT Public Company Limited
Laser processing of materials. Laser safety
Laser processing of materials Laser safety Prof. Dr. Frank Mücklich Dr. Andrés Lasagni Lehrstuhl für Funktionswerkstoffe Sommersemester 2007 Contents: LASER Safety Laser-tissue interaction Type of interaction
Cree XLamp 7090 LEDs XR Series
Cree XLamp 79 LEDs XR Series Cree XLamp 79 LEDs combine the brightness of power LED chips with a rugged package capable of operating in excess of one watt. Cree XLamp LEDs lead the solidstate lighting
FCC Test Report. Report No.: AGC FE01 2AAP6UB15MSKB. Attestation of Global Compliance (Shenzhen) Co., Ltd
Page 1 of 24 FCC Test Report Report No.: AGC03052141001FE01 FCC ID 2AAP6UB15MSKB PRODUCT DESIGNATION : Keyboard BRAND NAME : N/A MODEL NAME : UB-15MSKB CLIENT : Shenzhen Zowee Technology Co., Ltd. DATE
Dominant wavelength (nm) or CCT (K) Royal Blue 455nm 465nm 65 mw. Blue 465nm 475nm 4.5 lm. Green 520nm 535nm 18 lm. Amber 585nm 595nm 8.
Cree XLamp 455 LEDs Cree XLamp 455 LEDs bring the power of brightness to a wide range of lighting and backlighting applications including portable lighting, computer and television screens, signaling,
Laser Systems. !!!! iflex-iris
iflex-iris Laser Systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for integration into
Technical Data Sheet 5mm Infrared LED, T-1 3/4
Technical Data Sheet 5mm Infrared LED, T-1 3/4 Features High reliability High radiant intensity Peak wavelength p=85nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain within
Operating Instructions for ISSI Series LM2X, LM2X-DM, LM2X-DMHP
Operating Instructions for ISSI Series LM2X, LM2X-DM, LM2X-DMHP and LM2X-DMHP-RGB LED Modules August 31, 2006 Rev. 1 Caution This LED illuminator is manufactured with very high power LEDs. Please be aware
ULTRA High Power 980nm Pump Laser Module - Grating Stabilized, 750mW LC96U*
ULTRA High Power 980nm Pump Laser Module - Grating Stabilized, 750mW LC96U* These lasers are designed as pump sources for erbium doped fiber amplifier (EDFA) applications. Processes and techniques of coupling
Description. Applications 1.25 Gbps upstream and 2.5 Gbps analog downstream reception DFB-1310-DP-XX-5P-AAF-SA-X-X REV 003
Description The DFB-1310-DP-XX-5P-AAF-SA-X-X-183 series of Bi-Directional modules have been designed specifically for full-duplex communication over a single fiber. The devices are particularly suited
High-Power 8.0 W 9xx nm Fiber-Coupled Diode Laser 6397-L3 Series
COMMERCIAL LASERS High-Power 8.0 W 9xx nm Fiber-Coupled Diode Laser 6397-L3 Series Key Features 8.0 W output power 105 µm aperture 0.2 NA Highly reliable Applications Fiber laser pumping Material processing
High-Power 2.0 W 830 nm Fiber-Coupled Diode Laser 2486-L3 Series
COMMERCIAL LASERS High-Power 2.0 W 830 nm Fiber-Coupled Diode Laser 2486-L3 Series Key Features Up to 2 W output power at 0.22 NA 830 ± 15 nm 60 µm Step Index fiber Highly reliable Highly efficiency Applications
Technical Data Sheet 3mm Infrared LED, T-1
Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength λp=94nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain within
Atlantic. Industrial High Power Picosecond Lasers. features
Atlantic Industrial High Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 8 W output
High-Power 10 W 9xx nm Fiber-Coupled Diode Laser with Feedback Protection 6398-L4i Series
COMMERCIAL LASERS High-Power 10 W 9xx nm Fiber-Coupled Diode Laser with Feedback Protection 6398-L4i Series Key Features Full fiber laser feedback protection 10 W output power High reliability 105 µm aperture
LM Test Report
LM-79-08 Test Report For ELEC-TECH INTERNATIONAL CO LTD No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong Province, P.R. China 519085 LED Ceiling Light Model name(s): 544661##
L4 and L4i 915/940 nm Fiber- Coupled Lasers
L4 and L4i 915/940 nm Fiber- Coupled Lasers wwwlumentumcom Data Sheet Lumentum L4-series diode lasers offer up to 10 W of power from a 105 μm fiber The L4 is a revolutionary platform based on a long history
EMC TEST REPORT for : DONGGUAN EVER DEVELOPMENT ELECTRONIC CO., Electronic calculator Model No.: KF15758
Page 1 of 20 Report No. R011604553E EMC TEST REPORT for DONGGUAN EVER DEVELOPMENT ELECTRONIC CO., LTD. Electronic calculator Model No.: KF15758 Prepared for Address Prepared by Address : DONGGUAN EVER
OTFI 0285 XLM Plus High CRI LED Fiber Optic Light Module with Electronics Key Features
DATASHEET Lighting Solutions XLM Plus High CRI LED Fiber Optic Light Module with Electronics Key Features Color Rendering Index (CRI) over 90 with R9 values typically over 80 Bright Light intensity is
Verizon NEBS Compliance and Quality Assurance (NQA) Labeling Requirements for Light Emitting Products
Verizon NEBS Compliance Quality Assurance (NQA) Labeling Requirements f Light Emitting Products SIT.NEBS.TM.NPI.2005.030 February 21, 2006 SIT.NEBS.TM.NPI.2005.030 1 Infmation contained herein is subject
TEPT5600. Ambient Light Sensor. Vishay Semiconductors
Ambient Light Sensor Description TEPT56 is a silicon NPN epitaxial planar photo transistor in a standard T-1 3/4" plastic package. Peak of responsivity is in the visible spectrum. Infrared spectrum is
Technical Data Sheet 5mm Infrared LED, T-1 3/4
Technical Data Sheet 5mm Infrared LED, T-1 3/4 Features High reliability High radiant intensity Peak wavelength λp=94nm 2.54mm Lead spacing Low forward voltage Pb free The product itself will remain within
Sometimes the axis of the I-U-dependence are shown in reverse order. In this case the graph shows the stabilized current and measured voltage.
2. Electrical and other parameters 2.1. absolute maximum ratings are a listing of the environmental and electrical stresses that may be applied to a device without resulting in short term or catastrophic
ACT AUTOMATIC CONTRAST TRACKING
The SMARTEYE EZ-PRO is a high performance, automatic photoelectric sensor that can be adjusted by a single push of a button. As a result, there is no guess work on the part of the operator. Now you can
Fiber Laser Terminal Operating Manual
Fiber Laser Terminal Operating Manual Model:RDAcc_Fiber V1.2 Shenzhen RuiDa Technology CO., LTD Tel: 86-0755-26066687 Fax: 86-0755-26982287 Web: www.rd-acs.com E-Mail: support@rd-acs.com Add: 1B-1, Building
NV4V31SF. Data Sheet R08DS0070EJ0100 Rev Blue-Violet Laser Diode 405 nm Blue-Violet Laser Light Source DESCRIPTION FEATURES APPLICATIONS
Blue-Violet Laser Diode 405 nm Blue-Violet Laser Light Source Data Sheet R08DS0070EJ0100 Rev.1.00 DESCRIPTION The is a blue-violet laser diode with a wavelength of 405 nm. A newly developed LD chip structure
High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic package.
HCS 50W, 60W & 80W. Data Sheet. Housed Collimated High Power Laser Diode Bar
HCS 50W, 60W & 80W Housed Collimated High Power Laser Diode Bar Features: The II-VI Laser Enterprise HCS series of hard soldered collimated laser diode bars offer superior optical beam parameters with
EMC Test Report. Report No.: AGC EE01 : VR 6600PRO, VR 6610, VR 6700, VRP 6000, VRP 6800 : VERO GLOBAL COMMUNICATION CO.
Page 1 of 38 EMC Test Report PRODUCT DESIGNATION BRAND NAME MODEL NAME CLIENT : Dual Band Mobile Radio : VGC : VR 6600PRO, VR 6610, VR 6700, VRP 6000, VRP 6800 : VERO GLOBAL COMMUNICATION CO.,LTD DATE
Premier & Acculase Modulatable Laser Diode Modules
Premier & Acculase Modulatable Laser Diode Modules Premier & Acculase Range. The Premier & Acculase laser diode modules represent the highest level of optical and electrical performance at an economical
LM Test Report
LM-79-08 Test Report For ELEC-TECH INTERNATIONAL CO LTD No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong Province, P.R. China 519085 Wall Pack Model name(s): 533041xx Representative
DIGITAL LASER DISTANCE METER
DIGITAL LASER DISTANCE METER LD05-A10GF with glass-fiber coupled remote optical head The RIEGL LD05-A10GF is a multi-purpose laser distance meter based on precise timeof-flight laser range measurement
APPLICATION FOR VERIFICATION On Behalf of Carewell Electric Technology (Zhongshan) Co., Ltd. REMOTE CONTROL Model No.: AC8 FCC ID: 2AAZPAC8
Page 1 of 19 APPLICATION FOR VERIFICATION On Behalf of Carewell Electric Technology (Zhongshan) Co., Ltd. REMOTE CONTROL Model No.: AC8 Prepared for : Carewell Electric Technology (Zhongshan) Co., Ltd.
Atlantic. series. Industrial High Power Picosecond DPSS Lasers
Atlantic series Industrial High Power Picosecond DPSS Lasers Laser description Laser micromachining is rapidly becoming the material processing technology of choice for numerous small scale, real world
PRELIMINARY DATA SHEET: CKA7001C03
Features: Lighting Color(Peak Wavelength):275nm Applications: Disinfection Water Clarification Air Cleaning Deep UV-DVD Package: Surface Mount Type Ceramic Package PIN Configuration: PIN No. 1 PIN Name
High Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power molded in a clear,
Cree XLamp XR LED Data Sheet
Cree XLamp XR LED Data Sheet Cree XLamp LEDs combine the brightness of power LED chips with a rugged package capable of operating in excess of one watt. Cree XLamp LEDs lead the solid-state lighting industry
End Capped High Power Assemblies
Fiberguide s end capped fiber optic assemblies allow the user to achieve higher coupled power into a fiber core by reducing the power density at the air/ silica interface, commonly the point of laser damage.
Technical Data Sheet 3mm Infrared LED, T-1
Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength λp=94nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain within
ic-sn85 BLCC SN1C INFRARED LED
Rev B3, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Optimized irradiance pattern High temperature range -40 to 125 C High optical output power Fast switching speed APPLICATIONS
LM Test Report. for Elec-Tech International Co.,Ltd. LED CEILING LIGHT Model: XX(XX: 01-10)
LM-79-08 Test Report for Elec-Tech International Co.,Ltd No.1 Jinfeng Rd.,Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong province, China LED CEILING LIGHT Model: 540751XX(XX: 01-10) Laboratory:
ic-sd85 olga SD2C3 Infrared LED
Rev C2, Page 1/6 FEATURES Emission peak at 850 nm matched to silicon sensors Broad irradiance pattern (lambertian profile) High temperature range -40 to 125 C High optical output power Fast switching speed
ACULED DYO TM Design-Your-Own Guide
CUSTOM DESIGN GUIDE Lighting Solutions ACULED DYO TM DesignYourOwn Guide Overview Excelitas ACULED DYO TM gives customers the flexibility to DesignYour Own fourchip LED configuration to best suit specific
Diplexer Pigtailed Optical Subassembly. Description
Diplexer Pigtailed Optical Subassembly Description The DFB-1490-DP-1-3AT-2.5-xx-C-C series of Bidirectional modules are designed specifically for full-duplex communication over a single fiber and FTTx
LM Test Report. for Elec-Tech International Co.,Ltd. LED CEILING LIGHT Model: XX(XX: 61-70)
LM-79-08 Test Report for Elec-Tech International Co.,Ltd No.1 Jinfeng Rd.,Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong province, China LED CEILING LIGHT Model: 540751XX(XX: 61-70) Laboratory:
Ambient Light Sensor
Ambient Light Sensor DESCRIPTION 94 839 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye and has peak sensitivity
LM Test Report. for Elec-Tech International Co.,Ltd. LED CEILING LIGHT Model: XX(XX: 01-10)
LM-79-08 Test Report for Elec-Tech International Co.,Ltd No.1 Jinfeng Rd.,Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong province, China LED CEILING LIGHT Model: 540741XX(XX: 01-10) Laboratory:
DYNAMIC FREQUENCY SELECTION DFS Test Report
DYNAMIC FREQUENCY SELECTION DFS Test Report APPLICANT EQUIPMENT BRAND NAME MODEL NAME MARKETING NAME FCC ID STANDARD CLASSIFICATION : TCL Communication Ltd. : Tablet PC : alcatel : 9015B : Alcatel POP
Premier & Acculase Range Modular Modulatable Lasers
Premier & Acculase Range Modular Modulatable Lasers Features Flexible design accommodating wide range of lens and diode options High bore sight accuracy on Acculase model Visible and Infra red versions
NVLAP LAB CODE LM Test Report. For. Shenzhen OKT Lighting Co.,LTD. (Brand Name: OKT LIGHTING)
LM-79-08 Test Report For Shenzhen OKT Lighting Co.,LTD (Brand Name: OKT LIGHTING) NO.2076 Jincheng Rd,Shajing Town, Bao'an District, Shenzhen, China. SSL downlight retrofits Model name(s): CE6-40W-XXE
Standard 7-Segment Display 7 mm
TDSG5, TDSG6, TDSO5, TDSO6, TDSY5, TDSY6 Standard 7-Segment Display 7 mm DESCRIPTION 9235 The TDS... series are 7 mm character seven segment LED displays in a very compact package. The displays are designed
NVLAP LAB CODE LM Test Report. For. Shenzhen OKT Lighting Co.,LTD. (Brand Name: OKT LIGHTING)
LM-79-08 Test Report For Shenzhen OKT Lighting Co.,LTD (Brand Name: OKT LIGHTING) NO.2076 Jincheng Rd,Shajing Town, Bao'an District, Shenzhen, China. SSL downlight retrofits Model name(s): C10-D54W-XXE
OPERATING MANUAL. ACOUSTO OPTIC MODULATOR MODEL NUMBER: X-LTD X= 1, 2, or 3 mm DOCUMENT NUMBER: 51A00620D
OPERATING MANUAL ACOUSTO OPTIC MODULATOR MODEL NUMBER: 23080-1 23080-X-LTD X= 1, 2, or 3 mm DOCUMENT NUMBER: 51A00620D Document approved for release: W Seale Date: 6/20/06 US OFFICE:. 4005 Opportunity
Premier-LC User Guide
Premier-LC User Guide 1. PRODUCT OPERATION Thank you for purchasing the Premier-LC laser. This emits a red / infra-red spot. If you have any problems or require help when using the Premier-LC laser please
High Power Infrared Emitting Diode, 890 nm, GaAlAs / Double Hetero
TSPF62 High Power Infrared Emitting Diode, 89 nm, GaAlAs / Double Hetero 94 8389 DESCRIPTION TSPF62 is an infrared, 89 nm emitting diode in GaAlAs / double hetero (DH) technology with high radiant power,
Acculase Green PWM. Direct Drive Green Laser Diode Module
Acculase Green PWM Direct Drive Green Laser Diode Module Acculase Direct Drive Green Available in 520nm wavelength and with powers output powers up to 35mW the Acculase Direct Drive Green PWM represents
Technical Data Sheet 5mm Infrared LED, T-1 3/4
Technical Data Sheet 5mm Infrared LED, T-1 3/4 Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain
Safety Issues of the Baseband IR PHY
Aueust 1994 doc: IEEE P802.11-94/174 IEEE 802.11 Wireless Access Method and Physical Layer Specification Title: Safety Issues of the Baseband IR PHY Authors: Cipriano R. A. T. Lomba, Rui T. Valadas, A.M.
LASER RADIATION REQUIREMENTS
FLORIDA DEPARTMENT OF HEALTH LASER RADIATION REQUIREMENTS DECEMBER 15, 2016 EDITION LASER RADIATION REQUIREMENTS 4.002 As used in rule chapter 64E-4 Florida Administrative Code and this publication: (1)
Bridgelux Vesta Series Dim-To-Warm 9mm Array. Product Data Sheet DS150
Bridgelux Vesta Series Dim-To-Warm 9mm Array Product Data Sheet DS150 Introduction Vesta Series Vesta Series Dim-To-Warm Array products deliver adaptable light in a cost-effective, solid state lighting
For. Unit D16/F. should not use it to claim FCC ID: 2AAIN-MNGLOS
Page 1 of 49 TESTT REPORT For Applicant : ACOUSTMAX INTERNATIONAL CO.., LTD Unit D16/F Cheuk Nang Plaza 250 Hennessy Road Address : WanchaiHongKong Product Name : Monster GLO Model Name : MNGLO-S, MNGLO-L,MNGLO-M,MNGLO-Mini