INSTALLING AND REMOVING SLIT MASKS
|
|
|
- Jonathan Flowers
- 5 years ago
- Views:
Transcription
1 INSTALLING AND REMOVING SLIT MASKS The slits for the Goodman Spectrograph are mounted in individual frames (see above) that are stored in a 36 position carousel. When a slit is requested, the carousel is rotated to the desired slit, and a translating mechanism grabs it from the carousel and pulls it into the imaging field. Inside the carousel, slit frames ride on posts (two per frame), and are held against a central drum by strong magnets. The figure below shows the carousel with the cover off.
2 Because removing and replacing slits in the carousel is a regular operation, it is streamlined. The carousel cover (red circle in figure below) has an accessible opening 180 degrees away from the place where slits are withdrawn by the translation mechanism. Slits are inserted and removed manually through this opening. 1. Rotate Nasmyth cage Set Nasmyth rotator position to 0 degrees, so that the spectrograph bench is upright. 2. Log on to the Goodman Spectrograph Control Software Turn on power to the Goodman electronics box and log-on to the GSCS using an Operator or Engineering account. 3. Home the slit assembly Home the Slit Assembly (from the Main Menu, select Users --> Home Systems). 4. Open the instrument configuration window From the Main Menu, select Operator --> Configuration Panel. (Note that this panel is not accessible using an Observer account). The instrument configuration window will appear, as shown below. Select the Slit Carousel tab to reveal the current settings and options for slits, slicers, etc.
3 5. Locate a position Scroll through the Slit Mask Listbox, which displays the current configuration of masks inside the carousel. If installing a new mask, find an <EMPTY> position for the mask to be loaded. If removing a mask or replacing one with another, locate the current position of the mask to be removed. NOTE: Masks should not be loaded in positions labelled Out of service since masks in these positions may scrap the inner wall of the carousel housing drum when rotating. 6. Clear the position name If the desired position already contains a mask, you must first clear it. Highlight the row corresponding to the position in the Slit Mask Listbox by clicking on it, and press the X button to clear the slit mask name. If you are removing a mask, please note the position number as you will need to refer to it later. 7. Add the new mask name Click on the desired slit name in the Available Slits listbox on the right, and press the green arrow to move the slit name to the Slit Mask Listbox. If the name of the slit mask/slicer to be installed is not listed, please refer to the document INTEGRATING NEW COMPONENTS INTO THE GUI and return to these instructions thereafter.
4 8. Close the configuration window If you are satisfied with the changes made, click the Apply Changes button to update the mask listing and close the window. Click the Clear Changes or Load from Config File to undo any changes. 9. Align the carousel for mask installation Using the Mask Assembly drop-down menu, select the slit that is 18 positions after the slit to be removed/installed. If this results in a number greater than 36, then subtract 36. (e.g. if changing slit number 2, request slit number 18+2 = 20, but if changing slit number 35, request slit number = 53, = 17). 10. Remove slit (if any) Once requested position is loaded and the indicator light on the control panel for the slit assembly is green, remove the slit that is aligned to the opening on the accessible side of the carousel cover (see image below). To remove the slit, grasp the end of the frame through the opening and pull it off the retainer magnets. 11. Install the new mask (if loading new mask) Insert new slit into opening with holes aligned to posts until it attaches and is held by the magnets. IMPORTANT NOTE: THE FRONT (ILLUMINATED) SIDE OF THE SLIT SHOULD BE INSTALLED FACING THE REAR OF THE INSTRUMENT (see arrow in picture above). After 180 degree rotation to the opposite side, the slit will be facing forward when withdrawn by the translation assembly.
5 12. Test the rotation and translation (if loading new mask) Still standing next to the carousel, have someone select the new mask using the Mask Assembly drop-down menu. Listen for sounds of scrapping or dragging as the new device rotates within the carousel. It is best to test the mask s overall rotational freedom by selecting several different mask positions and listening for any contact points. If peculiar sounds are heard, move the mask to a different position and mark the carousel slot # it was in as Out of service using the instructions given in Steps Repeat Repeat steps 4-12 for other slits to be removed/inserted. Tips & Suggestions try to keep the carousel balanced by keeping the spacing between installed masks as even as possible. As more and more masks are added to this system, this may require a re-shuffling of all of them from time to time.
PivotTables PivotCharts (Chapter 5)
If a database contains a lot of information and the user would like to work with only a selection of the data in a table or as a chart, PivotTables and PivotCharts are a great solution. Data Mining: the
MAKING THE FAN HOUSING
Our goal is to make the following part: 39-245 RAPID PROTOTYPE DESIGN CARNEGIE MELLON UNIVERSITY SPRING 2007 MAKING THE FAN HOUSING This part is made up of two plates joined by a cylinder with holes in
CAMWorks How To Create CNC G-Code for CO2 Dragsters
Objective: In this chapter we will show how to mill out the axle holes for this CO2 Dragster from the left side. VI.1. Open the previously created file: Dragster axle hole 001.sldprt. VI.2. Select the
Selections With Adobe Photoshop CS3
Selections With Adobe Photoshop CS3 Welcome to Photoshop CS3 tutorials. Note: Learning how to select areas of an image is of primary importance-you must first select what you want to affect. Once you've
Step 1: Set up the variables AB Design. Use the top cells to label the variables that will be displayed on the X and Y axes of the graph
Step 1: Set up the variables AB Design Use the top cells to label the variables that will be displayed on the X and Y axes of the graph Step 1: Set up the variables X axis for AB Design Enter X axis label
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other
Try what you learned (and some new things too)
Training Try what you learned (and some new things too) PART ONE: DO SOME MATH Exercise 1: Type some simple formulas to add, subtract, multiply, and divide. 1. Click in cell A1. First you ll add two numbers.
Intro to One Point Perspective
Intro to One Point Perspective Horizon Line - The horizon line in perspective drawing is a horizontal line across the picture. It is always at eye level - its placement determines where we seem to be looking
SolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
Managing images with NewZapp
Managing images with NewZapp This guide is for anyone using the NewZapp Fixed editor as opposed to the Drag and Drop editor. The Image Manager is where images are uploaded and stored in your NewZapp account
Eduphoria Guide To Create a Test
Eduphoria Guide To Create a Test 1. Begin by logging into Eduphoria. If you do not have the link bookmarked, you can go to www.sapiacademies.org and click on the login link for Eduphoria on the top menu
SolidWorks Design & Technology
SolidWorks Design & Technology Training Course at PHSG Ex 5. Lego man Working with part files 8mm At first glance the Lego man looks complicated but I hope you will see that if you approach a project one
Xbox 360 S Hard Drive Bracket Replacement
Replace your HDD's plastic bracket. Rédigé par: David Hodson ifixit CC BY-NC-SA fr.ifixit.com Page 1 de 33 INTRODUCTION Give your Xbox's wiggly hard drive a new bracket to sit in. OUTILS: Metal Spudger
Engineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly.
Introduction - Teacher Notes Fig 1. The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly. Pro/DESKTOP enables pupils (and teachers) to communicate and model
Confocal Raman Microscopy (WITec Alpha 300R)
Confocal Raman Microscopy (WITec Alpha 300R) Please refer to Witec Alpha300R Confocal Raman Microscope User Manual for the details of the operating procedure. Sample preparation 1. Attach your sample on
Numicon Software for the Interactive Whiteboard v2.0 Getting Started Guide
Numicon Software for the Interactive Whiteboard v2.0 Getting Started Guide Introduction 2 Getting Started 3 4 Resources 10 2 Getting Started Guide page 2 of 10 Introduction Thank you for choosing the Numicon
User Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
Using Google SketchUp
Using Google SketchUp Opening sketchup 1. From the program menu click on the SketchUp 8 folder and select 3. From the Template Selection select Architectural Design Millimeters. 2. The Welcome to SketchUp
Information for users of the SOAR Goodman Spectrograph Multi-Object Slit (MOS) mode. César Briceño and Sean Points
Information for users of the SOAR Goodman Spectrograph Multi-Object Slit (MOS) mode César Briceño and Sean Points CTIO, June 2014 The Goodman Spectrograph has been offered for use in MOS mode starting
Xbox360 Slim Dismantling Instructions
Xbox360 Slim Dismantling Instructions These instructions will show you how to open the console to replace the DVDrom drive, laser and other internal parts. Opening your console will void your warrantee,
Source photo, sketchbook collage and digital collage
Source photo, sketchbook collage and digital collage Develop a mixed media project using traditional media, digital camera, scanner and image manipulation software. This technique encourages a creative
Getting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
Goodman Cookbook. Goodman Spectrograph. Adapted by D. Sanmartim from L. Fraga's Guide. Sep SOAR Telescope
Goodman Spectrograph 1 Goodman Spectrograph Documentation Goodman HTS Manual http://www.ctio.noao.edu/soar/content/goodman-hts-manual Goodman Overview http://www.ctio.noao.edu/soar/content/goodman-spectrograph-overview
How to Start Your Own Fundraising Page
How to Start Your Own Fundraising Page T h e G r e e n 5 K. c o m Thank you for supporting the Green 5K! Whether you re participating, volunteering, or want to raise funds for the cause, these instructions
Animating objects 1. We want the graphic we just created to appear in the following sequence.
Animating objects 1 Normally graphics in PowerPoint appear in one piece when the slide appears. Even if Preset Text Animation has been chosen in the Slide Sorter view, only text created by the Autotemplates
Panorama TELEPACK 608
Quick Reference Guide Datascope Panorama TELEPACK 608 SpO 2 Panorama_Telepk QRG_0003_rB.indd 1 Note: The Panorama Telepack SpO 2 Quick Reference Guide is not intended as a replacement to the Operating
The Revolve Feature and Assembly Modeling
The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling
Chapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
Garageband. For. Teachers
Garageband For Teachers To start a New Project : Click on the guitar on your dock this menu should pop up: click on the Loops option. This window will pop up next: Type the name of your song here Ex: 2011
To start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK.
Draft Tutorial This tutorial provides step-by-step instructions for the detailing of a drawing of the anchor block shown opposite. As you create this drawing, you will use the following drafting techniques:
Move System Swivel Caster Installation ( )
Move System Swivel Caster Installation (002-10265-00) Caution Always disconnect power to chair before removing covers or performing any service procedures. Step 1: Remove Top Cover A) Position chair to
Making an Architectural Drawing Template
C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards:! Starting from Scratch for the Last time! Creating
Swept-Field User Guide
Swept-Field User Guide Note: for more details see the Prairie user manual at http://www.prairietechnologies.com/resources/software/prairieview.html Please report any problems to Julie Last (jalast@wisc.edu)
Xbox 360 S Faceplate Replacement
Xbox 360 S Faceplate Replacement Faceplate replacement. Rédigé par: Matthew Newsom ifixit CC BY-NC-SA fr.ifixit.com Page 1 de 26 INTRODUCTION Make your Xbox 360 S look shiny and new by replacing the outer
General Help. Last revised: Winter When I try to print something on the computer, it appears to work, but nothing comes out of the printer.
General Help Last revised: Winter 2015 Problem Solution When I try to print something on the computer, it appears to work, but nothing comes out of the printer. See the next item. When I try to print something
Deck Mount Installation with Bench
Deck Mount Installation with Bench 1. Mark track with square. 2. Cut tracks with saw. 3. Drill ¼ hole (if needed.) 4. Countersink track. 5. Countersink all track 6. File all track ends. ends. 7. Lay out
2. Now you need to create permissions for all of your reviewers. You need to be in the Administration Tab to do so. Your screen should look like this:
How to set up AppReview 1. Log in to AppReview at https://ar.applyyourself.com a. Use 951 as the school code, your 6+2 as your username, and the password you created. 2. Now you need to create permissions
Embroidery Gatherings
Planning Machine Embroidery Digitizing and Designs Floriani FTCU Digitizing Fill stitches with a hole Or Add a hole to a Filled stitch object Create a digitizing plan It may be helpful to print a photocopy
Introduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
Create a Flowchart in Word
Create a Flowchart in Word A flowchart is a diagram of steps, movements or actions involved in a system or activity. Flowcharts use conventional geometric symbols and arrows to define relationships and
CAMWorks How To Create CNC G-Code for CO2 Dragsters
Creating the Left Side Smooth Finish Tool Path. This chapter will focus on the steps for creating the left side smooth finish tool path. The objective of this chapter is to create to an accurate and highly
Step One: Log into your MaineStreet account (use Internet Explorer as your browser for best functionality other browsers are buggy in this selection
Step One: Log into your MaineStreet account (use Internet Explorer as your browser for best functionality other browsers are buggy in this selection program). Go to Student Self Service. From Main Menu,
Dimensioning the Rectangular Problem
C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing
INTERMEDIATE PHOTOSHOP: FAMILY PHOTOS
INTERMEDIATE PHOTOSHOP: FAMILY PHOTOS What is Photoshop Elements? Photoshop Elements is a streamlined version of Adobe Photoshop CC. Despite missing some more advanced features, it is a robust piece of
Studuino Icon Programming Environment Guide
Studuino Icon Programming Environment Guide Ver 0.9.6 4/17/2014 This manual introduces the Studuino Software environment. As the Studuino programming environment develops, these instructions may be edited
3. Ready-to-Make Projects
3. Ready-to-Make Projects Ready-to-Make projects overview Cricut Design Space features ready-to-make projects created by professional artists. These projects include everything from home décor to fashion
EXERCISE 1: CREATE LINE SPARKLINES
EXERCISE 1: CREATE LINE SPARKLINES In this exercise you ll create line sparklines. Then you ll convert the line type to the column type. Part 1: Create the sparklines Before you start, notice that the
Spreadsheets 3: Charts and Graphs
Spreadsheets 3: Charts and Graphs Name: Main: When you have finished this handout, you should have the following skills: Setting up data correctly Labeling axes, legend, scale, title Editing symbols, colors,
There are two types of cove light in terms of light distribution inside a room
DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation
8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
1.1.1 The cube assembly has two filter retainer rings; one is located on the Exciter side and one is on the Emitter side as shown below.
1.1 Disassemble Cube 1.1.1 The cube assembly has two filter retainer rings; one is located on the Exciter side and one is on the Emitter side as shown below. Emitter Retaining Ring Exciter Retaining Ring
Programming Manual Washer Extractors Compass Control
Programming Manual Washer Extractors Compass Control 438 9216-01/EN 07.12 Contents Contents Safety precautions...5 General...7 Engaging servicemode...7 Programming...9 Parameter programming...9 Statistics...14
Assignment 13 CAD Mechanical Part 2
Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's
Timekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring User Guide
Timekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring 2004 User Guide Team 2 Edward Bangs Bryan Berry Chris Damour Kim Monteith Jonathan Szostak 1 Table of
How to remove Jammed Paper
How to remove Jammed Paper C801/C810/C821/C830/ C8600/C8800/ES2632a3/ ES8430 Rev.1 Paper Jams Paper jams occasionally occur due to paper misfeeding from a paper tray or at any point on the paper path through
Ping Pong Ball Launcher. Version 3.0 New Matter, 2016 Part number: 11069
Ping Pong Ball Launcher Version 3.0 New Matter, 2016 Part number: 11069 Hardware needed to complete this project: Size Length Used Label Screw, Type 25, Phillips Pan head, Thread Cutting #4 0.375 29 A
MATHEMATICAL FUNCTIONS AND GRAPHS
1 MATHEMATICAL FUNCTIONS AND GRAPHS Objectives Learn how to enter formulae and create and edit graphs. Familiarize yourself with three classes of functions: linear, exponential, and power. Explore effects
DO NOT PULL ON THE SHEATH.
Removing and Replacing the Head Cover To remove and replace the head cover you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) Removing the Head Cover 1. Ready the machine
straightening an image using your crop tool correct altered perspective with your crop tool
THE CROP TOOL This is one tool available in all image editing programs. It is useful for: quickly removing unwanted information at the edges of an image(aka distracting stuff!), recomposing a shot for
Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008
1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical
INSTALLATION STEPS MAXIMUS-3.COM
JK WRANGLER MAXIMUS-3 JK ROOF RACK/PLATFORM MAXIMUS-3 RHINO RACK ROOF PLATFORM/RACK IS NOT COMPATIBLE WITH JK 2-DOORS. THIS PRODUCT IS NOT DESIGNED TO WORK WITH JK SOFT TOP ROOF. INSTALLATION GUIDES Please
The user should already be familiar with operation of the instrument in STEM mode, use of the Microscope Control interface, and TIA.
FEI Tecnai F20 S/TEM: EDS system operation Nicholas G. Rudawski ngr@ufl.edu (805) 252-4916 (352) 392-3077 Last updated: 01/22/18 The user should already be familiar with operation of the instrument in
Getting Started. Right click on Lateral Workplane. Left Click on New Sketch
Getting Started 1. Open up PTC Pro/Desktop by either double clicking the icon or through the Start button and in Programs. 2. Once Pro/Desktop is open select File > New > Design 3. Close the Pallet window
Replacing the print cartridges
http://www.hp.com/support/lj9500 1 2 3 Replacing the print cartridges The printer uses four color print cartridges: yellow, magenta, cyan, and black. Follow this procedure to install the print cartridges.
Sketch-Up Project Gear by Mark Slagle
Sketch-Up Project Gear by Mark Slagle This lesson was donated by Mark Slagle and is to be used free for education. For this Lesson, we are going to produce a gear in Sketch-Up. The project is pretty easy
Datum Tutorial Part: Cutter
Datum Tutorial Part: Cutter Objective: Learn to apply Datums in different ways Directions 1. Datum Axis Creation a. First we need to create a center axis for the cutter b. Model Tab > Datum > Select Axis
Anchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
Activity Sketch Plane Cube
Activity 1.5.4 Sketch Plane Cube Introduction Have you ever tried to explain to someone what you knew, and that person wanted you to tell him or her more? Here is your chance to do just that. You have
Star Defender. Section 1
Star Defender Section 1 For the first full Construct 2 game, you're going to create a space shooter game called Star Defender. In this game, you'll create a space ship that will be able to destroy the
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
Table of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
Once you have chosen the water world this is how your screen should look.
Getting Started t With Alice By Ruthie Tucker under the direction of Prof. Susan Rodger Duke University, July 2008 www.cs.duke.edu/csed/alice/aliceinschools/ Let s Get Started The first step in making
Using Puzzilla.org to Find a Family to Research
ADOPT-A-FAMILY #1: Using Puzzilla.org to Find a Family to Research Go to puzzilla.org and click sign in Sign in with your FamilySearch login Click OK to allow Puzzilla to load your tree from FamilySearch
1. Reference Guide and Glossary
1. Reference Guide and Glossary Design Panel New Click the New Icon at any time to create a new project from scratch. Projects Browse, select, and cut projects from the Projects Tab. This includes your
Tuning the Uberti Open Top Revolvers By Larsen E. Pettifogger, SASS #32933 Life. Part 4
Tuning the Uberti Open Top Revolvers By Larsen E. Pettifogger, SASS #32933 Life Part 4 When we finished part 3, we had marked and punched the center of our Uberti open top arbor. We are now ready to install
Frequently asked questions about tool paths.
Frequently asked questions about tool paths. What is the difference between a Male, Female, and Online tool path? Tool paths come in three varieties male, female, and online. The difference has to do with
Z-Truck Up-and-Down Motion. Y-Truck Side-to-Side Motion. Head. Squaring Plate. Sliding Plate FIGURE 1: THE CARVEWRIGHT MACHINE
Setup and use of CarveWright CO2 Powered Dragster Jig The CO 2 powered Dragster Jig will arrive from the factory fully assembled, calibrated, and squared. In order to get the best results, your CarveWright
Exploring the Pythagorean Theorem
Exploring the Pythagorean Theorem Lesson 11 Mathematics Objectives Students will analyze relationships to develop the Pythagorean Theorem. Students will find missing sides in right triangles using the
Flexshaft Assembly. Flexshaft Support Tube. Clear Front Cover FIGURE 1: EXTERIOR VIEW OF THE FLEXSHAFT AND HEAD COVERS
Adjusting the Head Pressure Checking the head pressure and adjusting the vertical guide rods is part of the machine set-up process. The head pressure should also be checked periodically during routine
Tutorial Building the Nave Arcade
Tutorial: Digital Gothic AH C117B (Winter 2017) Tutorial Building the Nave Arcade Overview: Step 1: Determining and Drawing The Arch (Quinto Arch) Step 2: Extrude Molding Profile Step 3: Adding Walls Step
Constructing a Wedge Die
1-(800) 877-2745 www.ashlar-vellum.com Using Graphite TM Copyright 2008 Ashlar Incorporated. All rights reserved. C6CAWD0809. Ashlar-Vellum Graphite This exercise introduces the third dimension. Discover
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
prepared by Allison Hwang for T. Purdy 2011
This tutorial shows you how to create a basic screen display on a product in Adobe Photoshop. Creating details, such as shadows and reflections, can help make your product more realistic and convincing
Articulated Ladder Truck
Special Vehicle Series : 05 Articulated Ladder Truck View of completed model * This model was designed for Papercraft and may differ from the original in some respects. Tools tip Scissors Ruler, set square
EPSON Stylus Pro Quick Reference Guide
EPSON Stylus Pro 10000 Quick Reference Guide Loading Roll Paper First you attach the paper roll to the spindle and place the spindle in the printer. Then you load the paper for printing. 4 Slide the movable
BX-61: Brightfield Instruction /Continue to scroll for Fluorescent Instuctions
BX-61: Brightfield Instruction /Continue to scroll for Fluorescent Instuctions Starting up: Schematic of Olympus BX-61. 1. Turn on Olympus microscope power box (left of microscope) with toggle switch on
(W) INSTALLATION INSTRUCTIONS 3" ROUND & 4" OVAL SIDEBAR (90-DEG BENT END) DODGE RAM 1500 QUAD CAB PART #DZ /DZ /DZ /DZ
(W) INSTALLATION INSTRUCTIONS 3" ROUND & 4" OVAL SIDEBAR (90-DEG BENT END) PART #DZ 372231/DZ 372233/DZ 372237/DZ 372239 PARTS LIST: 3" ROUND & 4" OVAL SIDEBAR (90-DEG BENT END) Qty Description Qty Description
Creating Digital Illustrations for Your Research Workshop IV Illustration Demo Part II
Creating Digital Illustrations for Your Research Workshop IV Illustration Demo Part II Final Figure Workshop IV Components Topics & Techniques covered How to randomly transform a group of individual shapes.
AUTODESK INVENTOR Trial Projects
AUTODESK INVENTOR Trial Projects Drawing Creation Create detailed drawings of a collar flange PART 1: CREATING DRAWING VIEWS page: 2 1. 2. 3. Start by clicking the Projects icon in the ribbon. Navigate
Cricut Design Space App for ipad User Manual
Cricut Design Space App for ipad User Manual Cricut Explore design-and-cut system From inspiration to creation in just a few taps! Cricut Design Space App for ipad 1. ipad Setup A. Setting up the app B.
Art Rack Assembly Instructions:
Art Rack Assembly Instructions: ** PIECES ARE POWDER COATED Do not lay pieces on top of each other or on a hard, rough surface if possible. All bolts will pass from outside towards inside of the cage.
CHM 109 Excel Refresher Exercise adapted from Dr. C. Bender s exercise
CHM 109 Excel Refresher Exercise adapted from Dr. C. Bender s exercise (1 point) (Also see appendix II: Summary for making spreadsheets and graphs with Excel.) You will use spreadsheets to analyze data
Autodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
Maintenance Manual for Auto Lab
Version 1.1 9/30/2012 Maintenance Manual for Auto Lab Lubricate X axis There are two locations for lubrication at the back side of the gantry as shown in the below picture. The left one (from the backside
Appendix A. Selected excerpts from behavior modeling session Examples of training screens
Appendix A Selected excerpts from behavior modeling session Examples of training screens Selected Excerpts from Behavior Modeling tape...now, given that we ve talked about how we can use Solver, let s
TOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR FORD FLARESIDE TRUCKS
TOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR 53-87 FORD FLARESIDE TRUCKS Vise Grip Clamps C-clamps Sharpie Marker Ball Peen Hammer Center Punch 3/8 or 1/2 Drill 5/32, 7/32, 9/32, and 3/8 Drill Bits
Guide for Converting Your Deposit to Broadway Season Seats
Guide for Converting Your Deposit to Broadway Season Seats 1. Sign in with the e-mail that you made your deposit(s) with. Forgot your password? That s OK! Just click forgot password to create a new one.
This tutorial will show you how to use artistic grunge overlays to transform your photos into works of art.
ARTISTIC GRUNGE OVERLAYS For all photo editing software that supports PNG files If you have any questions, please feel free to contact me at kim@photosbykimhill.com. This tutorial will show you how to