INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION

Transcription

1 INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION Harrison Paint Company 1329 Harrison Avenue SW Canton, Ohio U.S.A. (800) Fax (330)

2 PRIMERS 961 LINE SHOPCOAT PRIMER GRAY, RED OXIDE, OFF WHITE, BLACK LOW ODOR ALKYD SHOPCOAT WATER REDUCIBLE ALKYD GRAY, RED OXIDE, OFF WHITE, BLACK GRAY, RED OXIDE, OFF WHITE, BLACK EPOXY ESTER METAL PRIMER YELLOW OXIDE EQUIPMENT ENAMEL PRIMER GRAY 611 PREMIUM ALKYD METAL PRIMER GRAY, RED OXIDE, WHITE GALVANIZED METAL PRIMER WHITE 3730 POLYAMIDE EPOXY PRIMER OFF WHITE 3386 ZINC PHOSPHATE PRIMER GRAY/GREEN 622 ACRYLIC METAL PRIMER GRAY, RED OXIDE, WHITE

3 COATINGS FOR THE STEEL FABRICATING INDUSTRY We ve been manufacturing quality paints and finishes for the steel industry since our inception in Order stock product by noon, receive the next business day We match custom colors at no charge Our coatings go through rigorous testing and QC before they are put into the field to assure you are getting the best product that perfectly fits your needs. We ll even do custom batches of as little as 50 gallons if you need a special paint for a special job..from a safety blue shop coat primer to a GM approved Direct to Metal topcoat, even exact gloss levels or viscosity We make round pegs for round holes, don t settle for fitting your production around your paint suppliers options tell us what you need and we ll design it for you, at no extra charge! Being a regional manufacturer allows us to react quickly to your special needs as well as providing personal and professional assistance with all your coating requirements. We supply any type coating you may need; water based, water reducible alkyd, solvent based, solvent & water based epoxy, solvent and water based urethanes. We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA Prepaid shipping on as little as 24 gallons We also stock a full line of spray tips, guns & parts as well as safety equipment, masking products and solvents We fill as few as 1 custom spray can for touch ups PRIMERS 961 Line Shop coat- Economical quick dry alkyd field primer. VOC compliant for shop application, available in gray, brown oxide, black, buff, off white & custom colors. 963 Line Shop coat Practically odorless quick dry alkyd shop primer, VOC compliant for shop or field application. Can topcoat with most strong solvent based finish even up to most 2k urethanes. Available in gray, brown oxide, black, off white & custom colors. High Solids. 919 Line Universal Primer Quick drying solvent based primer, VOC compliant for shop or field application. Resistant to most all strong solvent topcoats. Available in gray, brown oxide & white. 970 Line Water Reducible Alkyd Shop coat The ease and cost effectiveness of soap and water clean up, the toughness of an alkyd resin make this an excellent choice. VOC complaint for shop and field application. Available in gray, brown oxide, off white, black and custom colors. 909 Line Polyamide Epoxy Primer 2 component (1 to 1) high solids epoxy primer for use in severe chemical applications. VOC compliant for shop application. Available in gray & off white. 933 Primer Surfacer Single component solvent based quick dry primer that not only primes, but fills minor imperfections, dings and scrapes in your steel. Available in gray or custom colors. 939 Fleet Primer Single component red oxide solvent quick dry for use under automotive finishes as well as truck frames and undercarriages 941 Line Epoxy ester Primer Quick drying, single component epoxy primer for use on snow plows, salt-water shipping containers and others where protecting steel from salt is important. Available in yellow oxide or custom colors Harrison Avenue SW Canton, Ohio Line Fast Dry 1k solvent dries in minutes and can be top coated with strong solvent topcoats very quickly, including 2k urethanes and quick dries. 999 MCU A micaceous iron oxide primer for severe use applications under any topcoat Fax

4 Technical Data Sheet Product #: Product Name: Description: (Gray) (Brown Oxide) Alkyd Shop Primer A high solids, solventborne primer exhibiting fast air drying characteristics and very low VOC for a solvent thinned coating. Designed for use on interior and exterior metal surfaces. Suitable for topcoating with various solvent and waterborne systems including alkyd and latex. Ideal for use in fabrication shops and on structural steel and aluminum. Dries for handling or topcoating in two hours under normal conditions. Properties: Physical: Application: Viscosity: KU Viscosity: Weight/Gallon: /- 0.5 Lbs. Reduction: None Gloss: Flat Application Method: Airless spray/hvlp spray Weight Solids: 60% +/- 2.0 Volume Solids: 38% +/- 2.0 Clean-up: Mineral spirits/xylene VOC (theo.): Less than 3.2 Lbs/Gal. Coverage (sq. ft./gallon): (Less than 380 grams/liter) Wet Film Thickness: mils Dry Film Thickness: mils Flash Point: (Setaflash) 68 o F Dry to Touch: min. Storage: 1 year unopened container Dry to Recoat/Topcoat: 2 Hours at 77 o F Dry Hard: Hours Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventalition or heavy film thicknesses will extend dry times. Notes: May be topcoated with conventional and high solids oil base and latex coatings that do not contain strong solvents. Not designed for immersion. May be brush or roller applied to small areas. Surfaces to be painted must be clean and free from dirt, grease, oil, mill scale, rust and any other foreign matter by solvent wiping, hand or power tool cleaning. Do not apply at temperatures below 35 o F. Also available in (Off White) and (Black) by special order. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Date of Preparation: 5/12/04 Harrison Paint Company, 1329 Harrison Ave SW, Canton, OH Ph: (330) Fax: (330)

5 Technical Data Sheet Product #: Black Gray Off White Brown Oxide Product Name: Description: Alkyd Shop Primer A high solids, solventborne primer exhibiting fast air drying characteristics and very low VOC for a solvent thinned coating. Designed for use on interior and exterior metal surfaces. Suitable for topcoating with various solvent and waterborne systems including alkyd and latex. Ideal for use in fabrication shops and on structural steel and aluminum. Dries for handling or topcoating in two hours under normal conditions. Properties Properties listed are for Properties of other products within the line will be similar but may not be exactly the same. Physical: Application: Viscosity: KU Viscosity: As is Density (lbs/gal): / Reduction: None Gloss: Flat Reducer: None Weight Solids: 77% +/- 2.0 Application Method: Airless Spray / HVLP Spray Volume Solids: 57% +/- 2.0 Cleanup: VM&P Naphtha / Xylene Flash Point ( o F): 70 (Setaflash) Coverage (sq. ft./gallon): (excludes spray loss) VOC (grams/liter): Less than 340 Wet Film Thickness (mil): (lbs/gal): Less than 2.8 Dry Film Thickness (mil): Storage: Store at o F in a dry Dry to Touch: minutes place out of direct sunlight Dry to Recoat/Topcoat: 2 hours Dry Hard: hours Shelf Life: One year minimum in Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high unopened container at 77 o F humidity, poor ventilation or heavy film thicknesses will extend dry times. Notes: Not designed for immersion. May be brush or roller applied to small areas. Do not apply at temperatures below 35 o F. KEEP OUT OF REACH OF CHILDREN! Rev. 3/16/11 The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax Per Gal

6

7 Technical Data Sheet Product #: Product Name: Description: 1K Epoxy Metal Primer - Yellow A one component, fast air drying, corrosion resistant, solventborne paint designed to prime properly prepared metal surfaces. Formulated with epoxy ester resin for added toughness and chemical resistance. Properties: Physical: Application: Viscosity (#2 Zahn Cup): seconds Viscosity: As is Weight/Gallon (lbs./gal.): 9.5 +/ Reduction: Apply without thinning Gloss (at 60 o ): 10% Reducer: None Weight Solids: 49% +/- 2.0 Application Method: Spray Volume Solids: 33% +/- 2.0 Cleanup: Xylene VOC (theoretical): 575 grams/liter 4.8 lbs./gal. Coverage (sq. ft./gallon): Flash Point: 45 o F Wet Film Thickness: mils Storage: Store at o F in a dry Dry Film Thickness: mils place out of direct sunlight. Dry to Recoat: 2-4 Hours Shelf Life (at o F): 6 months minimum in Dry Hard: Hours unopened container. Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventalition or heavy film thicknesses will extend dry times. Notes: Corrosion Resistance: 100 Hours on cold rolled steel. Formulated without lead, chrome, or mercury. Not designed for immersion. May be brush or roller applied to small areas. Surfaces to be painted must be clean, dry, and free from dirt, grease, oil, mill scale, rust and any other foreign matter by solvent wiping, hand or power tool cleaning. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised 9/24/12 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

8 Technical Data Sheet Product #: (Formerly 401D0019) Product Name: Equipment Enamel Metal Primer - Gray Description: A fast air drying, corrosion resistant, solvent based paint designed to prime properly prepared metal surfaces. Properties: Physical: Application: Viscosity: 40-50" #4 Ford Cup Viscosity: As is Weight/Gallon: / Lbs. Reduction: None Gloss: Less than 60 o Reducer: None Weight Solids: 63% +/- 2.0 Volume Solids: 40% +/- 2.0 Application Method: Airless/HVLP/Conventional spray VOC (theo.): Less than 3.8 Lbs./Gal. Coverage: sq. ft. per gallon Wet Film Thickness: mils Flash Point: 55 o F Dry Film Thickness: mils Storage: 1 year 77 o F Dry to Recoat: 2-4 Hours Dry Hard: Hours Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventilation, or heavy film thicknesses will extend dry times. Notes: Formulated without lead, chrome, or mercury. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax Per Gal

9 TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST OIL BASE METAL PRIMER /14/2001S Formerly 471 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES A rust-inhibitive metal primer for interior or exterior use. Direct to metal application. Excellent corrosion resistance. May be topcoated with latex or oil base finish. Recommended for most interior or exterior iron and steel surfaces. Ideal metal primer for Defi-Rust Enamels. Not intended to be used as a finish coat. Not for use on galvanized metal. Do not mix with water or other paint products. COLORS FINISH Flat Red Oxide Gray White VEHICLE Alkyd FORMULATION Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING Less Than 10 % VISCOSITY K.U. PERCENT SOLIDS By weight: 67.9 ± 2.0% By volume: 46.0 ± 2.0% NET WT. PER GAL ± 0.25 lbs./gal. VOC CATEGORY 3.8 lbs./gal. (450 grams/liter) FLASH POINT 103 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Do not paint on surfaces hot from direct sunlight. All repairs, patching, and sanding should be done before primer is applied. Surfaces in poor condition may require the removal of old paint before priming. Lightly sand glossy surfaces to ensure proper adhesion. This primer can be top-coated after 12 hours under good drying conditions and must be top-coated within 48 hours. RECOMMENDED PRIMERS RECOMMENDED APPLICATION None Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Not to be tinted. DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 12 hrs. 48 hrs. PRACTICAL sq. ft./gal. REDUCTION COVERAGE (Depending upon the porosity of the substrate) (For spray reduction see recommended application) RECOMMENDED FILM PER COAT STANDARD PACKAGING Wet: Dry: mils mils CLEAN-UP PACKAGING AND DISTRIBUTION , , Gallon Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 Clean up with VM & P Naptha or Xylol A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH Phone: (330) Customer Service: Fax: (330)

10 TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST GALVANIZED METAL PRIMER /14/2001D Formerly 348 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES A galvanized metal primer for interior or exterior use. Best protection is achieved when top-coated with Defi-Rust Enamels. Recommended for most interior or exterior galvanized metal substrates. Ideal galvanizing primer for Defi-Rust Enamels. Not intended to be used as a finish coat. Do not mix with water or other paint products. COLORS FINISH Satin White VEHICLE Epoxy Ester/Linseed Oil FORMULATION Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING Oil VISCOSITY K.U. PERCENT SOLIDS By weight: 67.8 ± 2.0% By volume: 46.6 ± 2.0% NET WT. PER GAL ± 0.25 lbs./gal. VOC CATEGORY 3.8 lbs./gal. (450 grams/liter) FLASH POINT 103 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Do not paint on surfaces hot from direct sunlight. All repairs, patching, and sanding should be done before primer is applied. Surfaces in poor condition may require the removal of old paint before priming. New galvanizing that has aged for less than 90 days should be wiped down with mineral spirits before priming. This primer can be top-coated after 72 hours under good drying conditions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION None Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Not to be tinted. DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 24 hrs. 72 hrs. 5-7 days PRACTICAL sq. ft./gal. REDUCTION COVERAGE (Depending upon the porosity of the substrate) (For spray reduction see recommended application) RECOMMENDED FILM PER COAT STANDARD PACKAGING Wet: Dry: mils mils CLEAN-UP PACKAGING AND DISTRIBUTION Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 Clean up with VM & P Naptha or Xylol A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH Phone: (330) Customer Service: Fax: (330)

11 Technical Data Sheet Product #: Product Name: Description: (Part A - Epoxy) & (Part B - Curing Agent) 2K Polyamide Epoxy Primer - White A two component polyamide epoxy designed to prime a variety of interior and exterior metal surfaces. Forms a tough, abrasion and chemical resistant film that also resists rusting and corrosion. May be topcoated with most latex or solventborne finishes. Properties: Properties listed are for the mixed coating. Physical: Application: Viscosity: KU Reduction: Do not thin Weight/Gallon: (lbs./gal.) /- 0.5 lbs. Pot Life (70 o F): 8 Hours Gloss: Less than 20% Induction Time: 30 Minutes Weight Solids: 68% +/- 2.0 Application Method: Brush, roll, airless spray Volume Solids: 49% +/- 2.0 Clean-Up: Xylene VOC (calculated): Less than 450 grams/liter Coverage (sq. ft./gallon): Less than 3.8 lbs./gal. Wet Film Thickness: mils Dry Film Thickness: mils Flash Point: (Setaflash) 80 o F Dry to Touch: Minutes Storage: One year minimum in Dry to Recoat/Topcoat: 4-8 Hours unopened 77 o F Dry Hard: 24 Hours Mix Ratio: 1:1 by volume Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend dry times. Warmer temperatures will accelerate dry times. Notes: Surfaces to be primed must be clean, dry, and free from dirt, grease, oil, rust, mill scale, loose paint, and any other foreign matter. Thoroughly mix equal amounts by volume of Part A and Part B and allow to set for 30 minutes for induction. Do not exceed 8 hour pot life. Scuff sand glossy surfaces. Before applying over an existing finish, perform a spot test to check for lifting. Do not paint in direct sunlight or on surfaces hot from direct sunlight. Do not paint if rain is expected within 24 hours of application. Do not apply at temperatures below 50 o F or above 90 o F. Formulated without lead, chrome, or mercury. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Preparation Date: 1/11/06 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax Per Gal

12 TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST ACRYLIC LATEX METAL PRIMER /15/2003 DESCRIPTION A rust-inhibitive acrylic latex metal primer for interior or exterior use. Direct to metal application. Excellent corrosion resistance. Low odor/low VOC and fast dry. Soap & water cleanup. PRODUCT CHARACTERISTICS RECOMMENDED USES Recommended for most interior or exterior metal surfaces. Ideal metal primer for Defi-Rust Acrylic Latex Enamel or any other acrylic latex paint. Not intended to be used as a finish coat. Do not mix with oil colors, other paints, or solvents. COLORS FINISH Flat Red Gray Off-White VEHICLE Acrylic Latex Emulsion FORMULATION Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING Flat VISCOSITY K.U. PERCENT SOLIDS By weight: 53.0 ± 2.0% By volume: 38.3 ± 2.0% NET WT. PER GAL ± 0.25 lbs./gal. VOC CATEGORY 3.2 lbs./gal. (380 grams/liter) FLASH POINT 150 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. All repairs, patching, and sanding should be done before primer is applied. Surfaces in poor condition may require the removal of old paint before priming. Lightly sand glossy surfaces to ensure proper adhesion. This primer can be top-coated after 12 hours under good drying conditions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION None Brush: Roller: Spray: Airless: Up to 10:1 reduction with clean water APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Not to be tinted. DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4-6 hrs. 12 hrs. 48 hrs. PRACTICAL COVERAGE RECOMMENDED FILM PER COAT STANDARD PACKAGING sq. ft./gal. (Depending upon the porosity of the substrate) Wet: Dry: mils mils REDUCTION CLEAN-UP PACKAGING AND DISTRIBUTION , , Gallon Gallon Quart FREIGHT CLASS Non-Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 Not normally recommended. If necessary use small amounts of clean water. (For spray reduction see recommended application) Clean up with soap and water A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH Phone: (330) Customer Service: Fax: (330)

13 OEM FINISHES Can your supplier do this? With a requirement as little as 50 gallons, we can totally customize your coating to your exact specifications. We have the ability to match color, sheen level, viscosity, dry time, resistance to UV rays and chemicals, VOC levels, even coverage levels and put your product into any container size required, from spray cans to tank loads. Our turn around times for new custom orders is generally 2 weeks. Standard stocked products are shipped to you next day if ordered by noon. We never charge a 1st order set up fee for orders over 50 gallons. PRIMERS Alkyd Shopcoat Low VOC Low Odor Alkyd Shopcoat Water Reducible Alkyd 2 Component Polyamide Epoxy Single Component Epoxy Fleet Frame Waterborne Water Based Organic Zinc Inorganic Zinc Zinc Rich TOPCOATS FOR METAL Quick Dry Alkyd Acrylic Enamel Fast Production Enamel Waterborne Quick Dry Water Based Water Reducible Alkyd 2 Part Polyamide Epoxy Single Component Epoxy Water Based Epoxy Aliphatic Urethane Moisture Cured Urethane Acrylic Epoxy Water & Solvent Baking Enamels Water & Solvent Dipping Enamels Roll Coat Primer and Topcoat WOOD FINISHES Water Based Dipping Stain Solvent Based Dip Clear Flow Coat Primer Acrylic Lacquer 1329 Harrison Avenue SW Canton, Ohio Pre-Cat Lacquer Conversion Varnish Catalyzed Lacquer Glazing Fax

14 QUICK DRY ACRYLIC MODIFIED ALKYD ENAMEL Chain stop quick dry for superior gloss and color retention Rust inhibitive properties make this an ideal DTM coating VOC compliant Acrylic modified Available in many factory batch colors Quick dry and cure, urethane hardener may be used with this product High gloss finish with clean distinction of image Colors Available Tintable White Gloss Black New Cat Yellow Light Gray Ford Blue John Deere Green Deep Tint Base Clear Tint Base Safety Yellow Safety Red Chrysler Safety Orange Taylor Red Eggshell Black Flat Black

15 951 LINE ACRYLIC MODIFIED ENAMEL We ve been manufacturing quality paints and finishes industry since our inception in Chainstop technology for outstanding exterior gloss and color retention Direct to metal or over primer High solids (52% volume solids) Can be used with or without a hardener Dries fast for quick turnaround VOC compliant for shop applications ORDER BY NOON, RECEIVE THE NEXT BUSINESS DAY PREPAID SHIPPING FOR AS LITTLE AS 24 GALLONS 12 READY MADE POPULAR EQUIPMENT, MACHINE AND SAFETY COLORS We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA and never without a lab or set up fee. We make batches as small as 50 gallons to your exact specification Harrison Ave. SW Canton, Ohio Fax

16 Technical Data Sheet Product #: Product Name: Description: 951 Line Quick Dry Enamel A high gloss, solventborne, acrylic modified alkyd enamel designed with exceptionally fast air-drying characteristics and very low VOC for a solvent thinned coating. Acrylic modification enhances the durability and performance on interior and exterior metal surfaces. Outstanding corrosion and weather resistance. Recoatable in two hours under normal conditions. Ideal for OEM, field, or re-paint applications on steel and aluminum. Properties Properties specified are based on (Tinting White) and are typical of the series but may not apply exactly to each product within the series. Physical Application Viscosity: KU Viscosity: As is Weight/Gallon: / Lbs. Reduction: None Gloss: 85% minimum Application Method: Airless spray/hvlp spray Weight Solids: 66% +/- 2.0 Clean-up: Xylene Volume Solids: 51% +/- 2.0 Coverage: (sq. ft./gal.) (Excluding spray loss) VOC (theo.): Less than 3.5 Lbs./Gal. Wet Film Thickness: mils Less than 420 grams/liter Dry Film Thickness: mils Flash Point: (Setaflash) 45 o F Dry-To-Touch: minutes Dry to Recoat 2-8 Hours / After 48 Hours Storage: 1 year 77 o F Dry Hard: Hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Available In: Tinting White Black Ford Blue Deep Tint Base New Cat. Yellow John Deere Green Clear Tint Base Light Gray Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 844 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

17 951 ACRYLIC MODIFIED TINTABLE METALLIC ENAMEL We figured out a way to turn silver into gold Non leafing aluminum, will not rub off Chainstop technology for outstanding exterior gloss and color retention Direct to metal or over primer High solids (52% volume solids) Can be used with or without a hardener Dries fast for quick turnaround Perfect for trucks, decorative railings, rental furniture or anywhere a metallic finish is required Can be used on metal and most plastics as well as properly prepared and/or treated aluminum VOC compliant for most shop applications Available in quarts and gallons ORDER BY NOON, RECEIVE THE NEXT BUSINESS DAY PREPAID SHIPPING FOR AS LITTLE AS 24 GALLONS Standard metallic aluminum can be tinted into a rainbow of colors using solvent based industrial colorants We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA and never without a lab or set up fee. We make batches as small as 50 gallons to your exact specification Harrison Ave. SW Canton, Ohio Fax

18 Technical Data Sheet Product #: Product Name: Description: Non Leafing Aluminum Quick Dry Enamel A solventborne, acrylic modified, non leafing aluminum alkyd enamel designed with exceptionally fast air-drying characteristics and very low VOC for a solvent thinned coating. Acrylic modification enhances the durability and performance on interior and exterior metal surfaces. Outstanding corrosion and weather resistance. Recoatable in two hours under normal conditions. Ideal for OEM, field, or re-paint applications on steel and aluminum. Properties Physical Application Viscosity: KU Viscosity: As is Weight/Gallon: 8.7 +/ Lbs. Reduction: None Gloss: 80% minimum Application Method: Airless spray/hvlp spray Weight Solids: 60% +/- 2.0 Clean-up: Xylene Volume Solids: 50% +/- 2.0 Coverage: (sq. ft./gal.) (Excluding spray loss) VOC (theo.): Less than 3.5 Lbs./Gal. Wet Film Thickness: mils Less than 420 grams/liter Dry Film Thickness: mils Flash Point: (Setaflash) 45 o F Dry-To-Touch: minutes Dry to Recoat 2-8 Hours / After 48 Hours Storage: 1 year 77 o F Dry Hard: Hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. May be tinted with Degussa Chroma-Chem 844 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

19 Technical Data Sheet Product #: Product Name: 955 Line Quick Dry Enamel Satin Description: A satin finish, solventborne, acrylic modified alkyd enamel designed with exceptionally fast air-drying characteristics and very low VOC for a solvent thinned coating. Acrylic modification enhances the durability and performance on interior and exterior metal surfaces. Outstanding corrosion and weather resistance. Recoatable in two hours under normal conditions. Ideal for OEM, field, or re-paint applications on steel and aluminum. Properties Properties specified are based on (Tinting White) and are typical of the series but may not apply exactly to each product within the series. Physical: Application: Viscosity: KU Viscosity: As is Weight/Gallon: / Lbs. Reduction: None Gloss: Application Method: Airless spray/hvlp spray Weight Solids: 68% +/- 2.0 Clean-up: Xylene Volume Solids: 51% +/- 2.0 Coverage: (sq. ft./gal.) (Excluding spray loss) VOC (theo.): Less than 3.5 Lbs./Gal. Wet Film Thickness: mils Less than 420 grams/liter Dry Film Thickness: mils Flash Point: (Setaflash) 45 o F Dry-To-Touch: minutes Dry to Recoat 2-8 Hours / After 48 Hours Storage: 1 year 77 o F Dry Hard: Hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 844 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

20 Versa-cryl NEW FOR 2011 Water based quick dry acrylic enamel Available in high gloss & satin finishes Quick dry For use on architectural & industrial applications ONLY sold through independent dealers! Ready mixed colors & tint bases Our new Versa-cryl dries in minutes, has fantastic adhesion to most substrates and is available in many colors and sheens. VOC s < 250 g/l. Sand milled batches as small as 50 gallons of custom product are available, and as always, NEVER with a set-up or lab fee! 1329 Harrison Avenue SW Canton, Ohio Fax

21 Technical Data Sheet Product #: Product Name: Description: Waterborne Fast Dry Coating High Gloss Tinting White A water thinnable, low VOC coating designed for application on interior and exterior metal surfaces. Forms a tough, corrosion, UV, and weather resistance film for long term protection and outstanding gloss and color retention. May be applied direct-to-metal (DTM) or over a suitable metal primer. Dries quickly. Ideal for OEM, field, or re-paint applications. Properties: Physical: Application: Viscosity: (#3 Zahn Cup) seconds Viscosity: As is Weight/Gallon: (lbs./gal.) / Reduction: None normally required Gloss: 75% minimum Reducer: Clean water only if needed Weight Solids: 48% +/- 2.0 Application Method: Spray Volume Solids: 36% +/- 2.0 Clean-Up: Soap & water VOC (calculated): <250 grams/liter Coverage (sq. ft./gallon): 400 (excluding spray loss) Flash Point: (Setaflash) 165 o F (<2.1 lbs./gal.) Wet Film Thickness: mils Dry Film Thickness: Dry to Touch: mils minutes Storage: One year minimum in Dry to Recoat/Topcoat: 2 hours unopened Dry Hard: hours 77 o F Note: Drying times are for air dry at 77 o F and 50% RH. Force drying will decrease drying times dramatically. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend drying times. Notes: This product should be tinted with Chroma-Chem 896 line colorants. Do not force dry above 180 o F. All surfaces to be coated must be dry and clean of all foreign matter. Small or intricate areas may be brushed. Rolling is not recommended. Under good conditions, full cure is reached in 5-7 days when air dried only. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Rev. 3/21/11 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

22 Technical Data Sheet Product #: Product Name: Description: Versa-Cryl Waterborne Fast Dry Coating High Gloss Safety Yellow A water thinnable, low VOC coating designed for application on interior and exterior metal surfaces. Forms a tough, corrosion, UV, and weather resistance film for long term protection and outstanding gloss and color retention. May be applied direct-to-metal (DTM) or over a suitable metal primer. Dries quickly. Ideal for OEM, field, or re-paint applications. Properties: Physical: Application: Viscosity: (#3 Zahn Cup) seconds Viscosity: As is Weight/Gallon: (lbs./gal.) 8.9 +/ Reduction: None normally required Gloss: 75% minimum Reducer: Clean water only if needed Weight Solids: 42% +/- 2.0 Application Method: Spray Volume Solids: 36% +/- 2.0 Clean-Up: Soap & water VOC (calculated): <250 grams/liter Coverage (sq. ft./gallon): 400 (excluding spray loss) Flash Point: (Setaflash) 165 o F (<2.1 lbs./gal.) Wet Film Thickness: mils Dry Film Thickness: Dry to Touch: mils minutes Storage: One year minimum in Dry to Recoat/Topcoat: 2 hours unopened Dry Hard: hours 77 o F Note: Drying times are for air dry at 77 o F and 50% RH. Force drying will decrease drying times dramatically. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend drying times. Notes: This product can be tinted with Chroma-Chem 896 line colorants. Do not force dry above 180 o F. All surfaces to be coated must be dry and clean of all foreign matter. Small or intricate areas may be brushed. Rolling is not recommended. Under good conditions, full cure is reached in 5-7 days when air dried only. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

23 Water Reducible Alkyd Enamels We manufacture a full line of water reducible alkyds for numerous OEM applications Air Dry DTM Enamel Ready-To-Spray Air Dry DTM Enamel WR Baking Enamel ONLY sold through independent dealers! WR Baking Epoxy Enamel Air Dry & Baking Primers Our direct to metal water reducible alkyd 970 line is approved for use in containerization programs for the major US auto manufacturers. Sand milled batches as small as 50 gallons of custom product are available, and as always, NEVER with a set-up or lab fee! 1329 Harrison Avenue SW Canton, Ohio Fax

24 WATER REDUCIBLE ALKYD ENAMEL Durability of an alkyd enamel, easy soap and water clean up Rust inhibitive properties make this an ideal DTM coating VOC compliant, eliminiation of solvents for equipment clean up Approved by big 3 auto manufacturers for use on material handling equipment Available in many factory batch colors Quick dry and cure for improved manufacturing speed and dunnage installation High gloss finish with clean distinction of image Color Available See following pages for samples and available colors

25 WATER REDUCIBLE ALKYD ENAMEL Colors Available TINTABLE WHITE* GLOSS BLACK* BROWN OXIDE PRIMER* GRAY PRIMER* WHITE PRIMER/FLAT WHITE* FLAT BLACK/PRIMER* SAFETY YELLOW* GM NAO TEAL BLUE* FORD TARGET YELLOW* FORD CORP BLUE* CHRYSLER SAFETY PURPLE* ANSI 61 GRAY S/G* CHRYSLER SAFETY YELLOW* FORD M5J67A BEIGE FORD SEAL BROWN FORD EARTH BROWN FORD M316 GREEN FORD ST LOUIS GREEN FORD M340 MACHINE GRAY* FORD AXLE BROWN CHRYSLER BLUE # CHRYSLER GREEN # CHRYSLER STANDARD GRAY CHRYSLER BLUE # CHRYSLER GOLD # CHRYSLER SAFETY BLUE CHRYSLER MACHINE WHITE # CHRYSLER SAFETY ORANGE CHRYSLER STAMPING BLUE # CHRYSLER SAFETY RED # CHRYSLER SAFETY GREEN SAFETY RED METALLIC BLUE METALLIC ALUMINUM BRIGHT RED CASELLA GREEN SANITATION BROWN ATLANTIC GREEN CASELLA BLUE DEEP TINT BASE* CLEAR TINT BASE* W/R SOLVENT* * Denotes standard stocked item usually available for immediate shipment All other colors shown are catalog colors and are make and ship, generally within ten days with a minimum order of 50 gallons. Other colors available, but require additional lead time due to initial color match and quality control measures. Occasionally a color will change status depending on current market trends. Check with your sales person for current status.

26 TECHNICAL DATA SHEET Product #: Product Name: Description: 970 LINE WATER REDUCIBLE ALKYD ENAMEL A high gloss, air drying alkyd enamel thinned with water designed for coating properly prepared metal surfaces. Low VOC and corrosion resistance make this product ideal for painting structural steel or for OEM applications. PROPERTIES Physical Application Viscosity: KU Viscosity: As Is Weight/Gallon: 8.7 * Reduction: None normally required Gloss: 85%+ Reducer: (by volume) <10% with water if needed Weight Solids: 32% * Application Method: Conventional & Airless Spray Volume Solids: 26% * VOC: (Excluding water) VOC: (Including water) Coverage: 415 sq.ft./gal. * 340 grams/liter Wet Film Thickness: 3.8 mils 145 grams/liter Dry Film Thickness: 1.0 mil Flash Point: 109 o F Set-To-Touch: 30 min. Dry to Recoat: 2 hours Storage: 6 months 77 o F Dry Hard: 24 hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. May be brush or roller applied to small areas. Protect from freezing. * Varies by color The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 3/11/09 A division of the Harrison Paint Co Harrison Ave SW, Canton, OH Phone: (330) Fax: (330)

27 Technical Data Sheet Product #: Product Name: Description: 970 Line (High Flash) DTM Water Reducible Alkyd Enamels A high gloss, air drying alkyd enamel thinned with water designed for coating properly prepared metal surfaces. Low VOC and corrosion resistance make this product ideal for painting structural steel or for OEM applications. Properties Physical Application Viscosity: KU Viscosity: As is Weight/Gallon: 9.9 * Reduction: None normally required Gloss: 85%+ Reducer: (by volume) <10% with water if needed Weight Solids: 43% * Application Method: Conventional & Airless Spray Volume Solids: 26% * Clean-up: Water VOC (theo.): 340 grams/liter Coverage: (sq. ft./gal.) sq.ft/gal. * 145 grams/liter Wet Film Thickness: mils Dry Film Thickness: mils Flash Point: (Setaflash) 150 o F Dry-To-Touch: 30 minutes Storage: 6 months 77 o F Dry to Recoat 2 hours Dry Hard: 24 hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 896 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

28 Technical Data Sheet Product #: Product Name: Description: 974 Line Satin Water Reducible Alkyd Enamel A satin finish, air drying alkyd enamel thinned with water designed for coating properly prepared metal surfaces. Low VOC and corrosion resistance make this product ideal for painting structural steel or for OEM applications. Properties Physical Application Viscosity: KU Viscosity: As is Weight/Gallon: / Lbs.* Reduction: None normally required Gloss: Reduser: (by volume) <10% with water if needed Weight Solids: 47% +/- 2.0* Application Method: Conventional & Airless Spray Volume Solids: 32% +/- 2.0* Coverage: (sq. ft./gal.) (Excluding spray loss) VOC (Excluding water): Less than 340 grams/liter Wet Film Thickness: 3.1 mils VOC (Including water): Less than 130 grams/liter Dry Film Thickness: 1.0 mils Flash Point: (Setaflash) 109 o F Set-To-Touch: 30 min. Dry to Recoat: 2 hours Storage: 6 months 77 o F Dry Hard: 24 hours * Varies by color Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 896 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

29 COATINGS FOR FARM, CONSTRUCTION, MINING AND INDUSTRIAL EQUIPMENT We ve been manufacturing quality paints and finishes industry since our inception in Our coatings go through rigorous testing and QC before they are put into the field to assure you are getting the best product that perfectly fits your needs. We ll even do custom batches of as little as 50 gallons if you need a special paint for a special job..from a safety blue shop coat primer to a GM approved Direct to Metal topcoat, even exact gloss levels or viscosity We make round pegs for round holes, don t settle for fitting your production around your paint suppliers options tell us what you need and we ll design it for you, at no extra charge! Order stock product by noon, receive the next business day We match custom colors at no charge Prepaid shipping on as little as 24 gallons We also stock a full line of spray tips, guns & parts as well as safety equipment, masking products and solvents We fill as few as 1 custom spray can for touch ups Being a regional manufacturer allows us to react quickly to your special needs as well as providing personal and professional assistance with all your coating requirements. We supply any type coating you may need; water based, water reducible alkyd, solvent based, solvent & water based epoxy, solvent and water based urethanes. We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA 1329 Harrison Avenue SW Canton, Ohio Fax

30 DEFI-RUST EQUIPMENT ENAMEL Air dry enamel, dries to touch in 1 hour, perfect for machinery Rust inhibitive properties make this an ideal DTM coating VOC compliant May be used with urethane hardener for improved exterior performance Available in many factory batch colors May be touched up with brush or trim roller with good leveling High gloss finish with clean distinction of image Colors Available Fleet White* Fleet Black* Safety Red* Omaha Orange* Safety Yellow* New Cat Yellow* Refuse Blue* Walnut Brown* Dark Gray* Maroon Komatsu Yellow Dumpster Green Safety Orange Terex/Clark Green Light Gray Komatsu Orange Medium Yellow Komatsu Yellow * standard stock colors usually available for immediate shipment

31 Technical Data Sheet Product #: Product Name: Description: 931 Line Equipment Enamel A series of fast, air drying, solventborne alkyd coatings designed for painting properly prepared metal surfaces. Provides a high gloss, corrosion resistant finish. Recommended for tractors, trailers, machinery, tools, snow plows and industrial maintenance applications. Physical Application Viscosity: KU Viscosity: Apply without thinning Weight/Gallon: 9.4 +/ Lbs. Reduction: None Gloss: 85% minimum Reducer: None Weight Solids: 65% +/- 2.0 Application Method: Airless spray/hvlp spray/conventional Spray Volume Solids: 52% +/- 2.0 Clean-up: Xylene/VM&P Naphtha Flash Point: (Setaflash) 55 o F Coverage: (sq. ft./gal.) (Excluding spray loss) VOC (theo.): Less than 340 grams/liter Wet Film Thickness: mils Less than 2.8 Lbs./Gal. Dry Film Thickness: mils Dry to Recoat Hours Storage: Store at 60-80oF in a dry place out of direct sunlight Dry Hard: Hours Shelf Life: Physical properties shown are based on (White). Physical properties of other products within the line may vary. One year minimum in unopened container at 77oF Properties Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Read label directions for detailed instructions and warnings. Formulated without lead, chrome, or mercury. Do not use on bare galvanized metal. Do not exceed recommended film thickness, apply to hot surfaces or apply in direct sunlight as this can cause wrinkling, blistering, peeling or other failure. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax

32 DEFI-RUST ALKYD ENAMEL Air dry enamel, dries to touch in 4 hours Rust inhibitive properties make this an ideal DTM coating VOC compliant May be used with urethane hardener for improved exterior performance Available in many factory batch colors Also available in matching aerosols for touch ups and hard to reach areas High gloss finish with clean distinction of image Colors Available Gloss White Gloss Black Satin White Safety Yellow Safety Red Machinery Gray Satin Black Hunter Green Fern Green Light Gray Flat Black Safety Blue Navy Blue Burgundy Spring Green Bronzetone Aluminum Safety Orange Light Tint Base Midtone Base Deep Base Clear Base

33 TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST OIL BASE ENAMEL /14/2001K Formerly 440 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES A gloss enamel formulated to protect and beautify interior and exterior wood Recommended for machinery, tanks, implements, furniture, tractors, boats, and metal surfaces. Direct to metal application. Excellent corrosion resistance. trucks, trailers, and buses. Ideal for use on all similar surfaces where a heavy-duty coating is required. Do not mix with water or other paint products. Outstanding toughness and durability on wood. COLORS FINISH High Gloss White Black LTB MTB DTB CLB Fire Red New Cat Yellow Shamrock Green Machine Gray Safety Yellow Dark Roof Green Fern Green Charleston Green Light Gray Vista Green Safety Orange Safety Blue Walnut VEHICLE FORMULATION Alkyd Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING 85 % VISCOSITY K.U. PERCENT SOLIDS By weight: 62.2 ± 2.0% By volume: 45.6 ± 2.0% NET WT. PER GAL. 9.3 ± 0.25 lbs./gal. VOC CATEGORY 3.8 lbs./gal. (450 grams/liter) FLASH POINT 103 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Do not paint late in the day or on dewey mornings especially in high humidity areas as flashing could occur. Do not paint on surfaces hot from direct sunlight. Previously painted surfaces should be cleaned, patched, and spot-primed as needed. Surfaces in poor condition may require the removal of old paint and a prime coat. Bare metal should be coated with a proper Defi-Rust metal primer to achieve optimum rust-inhibitive properties. Galvanized metal must be coated with Defi-Rust Galvanized Metal Primer prior to application of this product.two coats of this product are recommended on most surfaces. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Interior Wood Exterior Wood Metal Galvanizing Direct Application Direct Application , , Defi-Rust Metal Primers Defi-Rust Galvanized Metal Primer Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Hundreds of additional colors may be obtained by using the tint bases and approved colorants DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4-6 hrs hrs. 48 hrs. PRACTICAL sq. ft./gal. REDUCTION COVERAGE (Depending upon the porosity of the substrate) (For spray reduction see recommended application) RECOMMENDED FILM PER COAT Wet: Dry: mils mils CLEAN-UP PACKAGING AND DISTRIBUTION STANDARD PACKAGING , , , , All Tint Bases All other standard colors 5 Gallon 5 Gallon Gallon Gallon Gallon Quart Quart Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH Phone: (330) Customer Service: Fax: (330) Clean up with VM & P Naptha or Xylol

34 OTC/AIM/LADCO COMPLIANT SOLVENT BASED COATINGS DON T BE MISLED! While the government has limited the amount of VOC s per gallon of paint, it isn t illegal to sell solvent based coatings as long as the VOC limits aren t exceeded for particular applications WHERE THE PRODUCT IS BEING APPLIED. The limits vary by state, but as a general rule the following applies: Architectural high gloss- 250 g/l Architectural low sheen 150 g/l Architectural metal 400 g/l Architectural primer 200 g/l Stain block primer 350 g/l Industrial Primer 340 g/l Industrial Topcoat 340 g/l Industrial DTM 340 g/l OEM primer point source OEM topcoat point source OEM DTM point source Metallic Gloss 500 g/l Swimming pool paint 340 g/l Defi-Rust Alkyd DTM Gloss 15 colors, 4 bases Satin 3 colors, 4 bases Primer 4 colors 135 Series Exterior House Paint Gloss 1 color, 1 base Country Estate Linseed Barn Paint Gloss 3 colors Versa-Seal Interior/Exterior Alkyd Stain Blocking Primer Dura-Guard 739LV Poly Floor & trim Gloss 8 colors, 3 bases Polyamide 2 Part (50/50) Gloss Epoxy 2 colors, 2 bases Clear Polyurethane Concrete Finish 1 blend, 1 MCU Heavy Duty 1K Epoxy Non-Skid Floor Coating 7 colors Oil Modified Urethane Gym/Wood Finish Gloss, Semi-Gloss, Satin Check with your municipality to verify your limits don t vary from your states requirements. Metallic Aluminum Paint Low Odor Hi-Solids Shopcoat Primer 1 Brushing, 1 Hi-Heat 4 colors 931 Series Gloss Equipment Enamel 10 colors Rubber Based Swimming Pool Paint Polyamide Epoxy Swimming Pool Paint DTM Water Reducible Alkyd Enamel 4 colors 4 colors 12 colors, 4 primers, 3 bases 1329 Harrison Avenue SW Canton, Ohio Fax Moisture Cured Urethane Clear or with pigment pack Gloss

35 Technical Data Sheet Product #: Product Name: Description: 611 LV Line OTC Compliant Defi Rust Enamel A tough, durable VOC compliant enamel finish that seals, beautifies and protects interior and exterior metal and wood surfaces. A rust-inhibiting formula that creates an armor coating against the corrosion of metal and a shield against degradation of wood due to weathering Properties: Properties specified are based on LV (White) and are typical of the series but may not apply exactly to each individual product within the series. Physical: Application: Viscosity: KU Viscosity: As is Weight/Gallon: 10.32* Reduction: Apply without thinning Gloss: 85% minimum Reducer: None Weight Solids: 57% +/- 2.0 Application Method: Brush, Roller, Airless Spray Volume Solids: 47% +/- 2.0 Clean-Up: Mineral Spirits VOC (calculated): Less Than 340 grams/liter Coverage (sq. ft./gallon): Less Than 2.8 lbs./gallon Wet Film Thickness: Dry Film Thickness: mils Flash Point: (Setaflash) 103 o F Dry to Touch: 3-4 hours Storage: One year minimum in Dry to Recoat/Topcoat: hours unopened 77 o F Dry Hard: hours Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend dry times. Notes: All surfaces to be finished must be clean and free from dirt, dust, water, wax, polish, loose coatings and any other foreign matter. May be applied direct-to-metal (DTM) offering outstanding adhesion on properly prepared surfaces. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. 3/25/2009 Harrison Paint Company, 1329 Harrison Ave SW, Canton, OH Ph: (330) Fax: (330)

36 DEFI-RUST ACRYLIC LATEX ENAMEL Air dry enamel, dries to touch in 1 hour Rust inhibitive properties make this an ideal DTM coating VOC compliant Superior hardness and durability with soap and water clean up Available in many factory batch colors Also available in matching aerosols for touch ups and hard to reach areas High gloss finish with clean distinction of image Colors Available Gloss White Gloss Black Satin White Safety Yellow Safety Red Machinery Gray Satin Black Hunter Green Fern Green Light Gray Flat Black Safety Blue Navy Blue Burgundy Spring Green Bronzetone Aluminum Safety Orange Light Tint Base Midtone Base Deep Base Clear Base Red Primer Gray Primer Off White Primer

37 TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST ACRYLIC LATEX ENAMEL /13/2001L Formerly W440 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES An acrylic latex enamel formulated to protect and beautify interior and exterior wood, metal, or masonry surfaces. Low odor/low VOC. Excellent direct to metal application and corrosion resistance. Outstanding toughness and durability on wood. Recommended for Machinery, tanks, implements, furniture, tractors, boats, trucks, trailers, and buses. Ideal for use on all similar surfaces where a heavy-duty coating is required. Do not mix with oil colors, other paints, or solvents. Soap & water cleanup. COLORS FINISH Gloss White Black LTB Fire Red Shamrock Green Safety Yellow Safety Blue Walnut Bronzetone (Satin) VEHICLE Acrylic Latex Emulsion MTB Charleston Green DTB Light Grey FORMULATION Lead, chromate, and mercury free CLB Safety Orange PHYSICAL DATA GLOSS RATING 75 %+ VISCOSITY K.U. PERCENT SOLIDS By weight: 46.2 ± 2.0% By volume: 35.3 ± 2.0% NET WT. PER GAL ± 0.25 lbs./gal. VOC CATEGORY 3.2 lbs./gal. (380 grams/liter) FLASH POINT 150 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. New stucco or masonry surfaces should age 30 days before being painted. Previously painted surfaces should be cleaned, patched, and spot-primed as needed. Surfaces in poor condition may require the removal of old paint and a prime coat. Unpainted surfaces should receive one coat of the recommended primer before painting; bare metal should be coated with a proper Defi-Rust Metal primer to optimize rust-inhibitive properties. Two coats of this product are recommended on most surfaces. For maximum corrosion resistance, triple film thickness per coat listed below. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Interior Wood Exterior Wood Metal Galvanizing Masonry Acrylic Enamel Undercoater Exterior Alkyd Wood Primer Defi-Rust Latex Metal Primer Defi-Rust Latex Metal Primer Classic Versa-Seal Brush: Roller: Spray: Airless: Up to 10:1 reduction with clean water APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Hundreds of additional colors may be obtained by using the tint bases and approved colorants DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 12 hrs. 24 hrs. PRACTICAL COVERAGE RECOMMENDED FILM PER COAT STANDARD PACKAGING sq. ft./gal. (Depending upon the porosity of the substrate) Wet: Dry: mils mils , All other tint bases and standard colors REDUCTION CLEAN-UP PACKAGING AND DISTRIBUTION 5 Gallon Gallon Gallon Not normally recommended. If necessary use small amounts of clean water. (For spray reduction see recommended application) Clean up with soap and water Quart Quart FREIGHT CLASS Non-Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH Phone: (330) Customer Service: Fax: (330)

38 POLYAMIDE EPOXY 1 hour dry Excellent water resistance VOC compliant Superior hardness 1:1 mix ratio for ease of use Extreme chemical resistance High gloss finish Colors Available Tintable White Tintable Clear

39 TECHNICAL DATA SHEET Interior/Exterior POLYAMIDE EPOXY COATING (WHITE) /03/2003 [ ] [ ] DESCRIPTION A premium two-part catalyzed polyamide epoxy with exceptionaly high gloss, hardness, and overall performance. Tile-like appearance. Highly resistant to scrubbing, scuffing, and various industrial chemicals such as strong acids & bases when applied as per instructions. COLORS LTB Base (Component A) Catalyst (Component B) PRODUCT CHARACTERISTICS RECOMMENDED USES Recommended for use on properly prepared plaster, drywall, hardboard, concrete, cement block, brick, wood, metal, and fiberglass. Ideal for storage tanks, pumps, steel pipes, bridges, drain-wells, concrete floors and automotive undercoating. Do not mix with water or other paint products. FINISH VEHICLE FORMULATION PHYSICAL DATA GLOSS RATING 90 % VISCOSITY A 103 K.U. PERCENT SOLIDS A By weight: 75.3 ±1.0% By volume: 55.0 ±1.0% B By weight: 54.3 ±1.0% By volume: 46.2 ±1.0% VOC (CATEGORY) A 3.8 lbs./gal. (450 grams/liter) B 3.8 lbs./gal. (450 grams/liter) NET WT. PER GAL. FLASH POINT High Gloss Polyamide Epoxy Resin Lead, chromate, and mercury free B 57 K.U. A 12.0 ± 0.25 lbs./gal. B 9.0 ± 0.25 lbs./gal. A 93 F Closed Cup B 84 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Thoroughly mix together component A + B at a 1:1 ratio about 30 min. prior to application. Mechanical agitation is preferred. Pot life after mixing is 8 hrs. Mix only what is needed for use. Do not use over other coatings unless first tested for lifting. Concrete floors must be acid etched. Brush application is recommended using a nylon bristle brush for small areas only. Do not attempt to brush out large areas. Roller application is recommended only on smooth surfaces such as drywall and plaster using a short-napped mohair or pronel cover. Keep roller well filled as less than a full roller can result in air entrapment, causing a bubble formation in film. For optimum results and appearance of finish coat, conventional or airless spray application is recommended. Material can be applied by conventional spray only at temperatures above 50 F. Sprayer should be Binks Model #18 or equivalent with fluid nozzle #66, needle #65, orifice.070, air cap #66 PA, fluid hose size 3/8 inch and air hose size 1/2 inch. Can also be applied by airless spray using Graco President model or equivalent with pump ratio 28:1 or better, orafice size.015 to.021, fluid pressure 1200 to 2400, high pressure fluid hose 3/8 inch, and air hose 1/2 inch. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Metal , -72, -73 Universal Primer Porous Block Block Filler All Other Surfaces Classic Versa-Seal Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Approved colorants may be added to LTB before mixing with catalyst not to exceed 8 oz. per gallon. Use double the tinting formula. CURING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 8 hrs. 24 hrs. PRACTICAL sq. ft./gal. REDUCTION As Supplied COVERAGE (Depending upon the porosity of the substrate) (For spray reduction, see recommended application) RECOMMENDED FILM PER COAT Wet: Dry: mils mils CLEAN-UP PACKAGING AND DISTRIBUTION STANDARD PACKAGING , (Packaged as kits only) Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Brands Corp. P.O. Box 8470 Canton, OH Phone: (330) Customer Service: Fax: (330) Clean up with Epoxy Thinner

40 TECHNICAL DATA SHEET Interior/Exterior POLYAMIDE EPOXY COATING (CLEAR BASE) /03/2003 [ ] [ ] DESCRIPTION A premium two-part catalyzed polyamide epoxy with exceptionaly high gloss, hardness, and overall performance. Tile-like appearance. Highly resistant to scrubbing, scuffing, and various industrial chemicals such as strong acids & bases when applied as per instructions. COLORS Clear Base (Component A) Catalyst (Component B) PRODUCT CHARACTERISTICS RECOMMENDED USES Recommended for use on properly prepared plaster, drywall, hardboard, concrete, cement block, brick, wood, metal, and fiberglass. Ideal for storage tanks, pumps, steel pipes, bridges, drain-wells, concrete floors and automotive undercoating. Do not mix with water or other paint products. FINISH VEHICLE FORMULATION PHYSICAL DATA GLOSS RATING 90 % VISCOSITY A 103 K.U. PERCENT SOLIDS A By weight: 75.3 ±1.0% By volume: 55.0 ±1.0% B By weight: 54.3 ±1.0% By volume: 46.2 ±1.0% VOC (CATEGORY) A 3.8 lbs./gal. (450 grams/liter) B 3.8 lbs./gal. (450 grams/liter) NET WT. PER GAL. FLASH POINT High Gloss Polyamide Epoxy Resin Lead, chromate, and mercury free B 57 K.U. A 12.0 ± 0.25 lbs./gal. B 9.0 ± 0.25 lbs./gal. A 93 F Closed Cup B 84 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Thoroughly mix together component A + B at a 1:1 ratio about 30 min. prior to application. Mechanical agitation is preferred. Pot life after mixing is 8 hrs. Mix only what is needed for use. Do not use over other coatings unless first tested for lifting. Concrete floors must be acid etched. Brush application is recommended using a nylon bristle brush for small areas only. Do not attempt to brush out large areas. Roller application is recommended only on smooth surfaces such as drywall and plaster using a short-napped mohair or pronel cover. Keep roller well filled as less than a full roller can result in air entrapment, causing a bubble formation in film. For optimum results and appearance of finish coat, conventional or airless spray application is recommended. Material can be applied by conventional spray only at temperatures above 50 F. Sprayer should be Binks Model #18 or equivalent with fluid nozzle #66, needle #65, orifice.070, air cap #66 PA, fluid hose size 3/8 inch and air hose size 1/2 inch. Can also be applied by airless spray using Graco President model or equivalent with pump ratio 28:1 or better, orafice size.015 to.021, fluid pressure 1200 to 2400, high pressure fluid hose 3/8 inch, and air hose 1/2 inch. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Metal , -72, -73 Universal Primer Porous Block Block Filler All Other Surfaces Classic Versa-Seal Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Approved colorants may be added to white base before mixing with catalyst not to exceed 24 oz. per gallon. Use double the tinting formula. CURING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 8 hrs. 24 hrs. PRACTICAL COVERAGE sq. ft./gal. (Depending upon the porosity of the substrate) REDUCTION As Supplied RECOMMENDED FILM PER COAT Wet: Dry: mils mils CLEAN-UP PACKAGING AND DISTRIBUTION STANDARD PACKAGING , (Packaged as kits only) Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Brands Corp. P.O. Box 8470 Canton, OH Phone: (330) Customer Service: Fax: (330) Clean up with Epoxy Thinner

41 TECHNICAL DATA SHEET Interior/Exterior 2K HIGH SOLIDS EPOXY MASTIC 9909-XX 7/25/13 DESCRIPTION Two-component, high-build, solventborne coating. Provides a high gloss finish that resists abrasion, scuffing, marring, corrosion, and many chemicals. Penetrates & adheres to rust that is tightly bound to the substrate. Low permeability film. Low VOC formulation (compliant for most areas). PRODUCT CHARACTERISTICS RECOMMENDED USES Use as a high-build primer or finish coat over concrete & metal surfaces, including sound, rusty metal. May be applied to surfaces prepared by hand or power tool cleaning where blasting is impractical or prohibited. May be used as a high-build primer under a variety of topcoats. PRODUCTS/COLORS FINISH High Gloss Base (Part A): White Safety Yellow Silver Gray Safety Red VEHICLE Amine Catalyzed Epoxy Safety Blue FORMULATION Formulated without lead, chrome and mercury Hardener (Part B): Clear PHYSICAL DATA (Mixed Components) GLOSS RATING 85% ± 5.0 MIX RATIO 4 parts Base (Part A) to 1 part Hardener (Part B) VOLUME SOLIDS 82% ± 3.0 INDUCTION None POT LIFE 3 75 o F VOC CATEGORY Less than 250 grams/liter after thinning FLASH POINT 80 o F SURFACE PREPARATION & APPLICATION INSTRUCTIONS Read label directions for detailed surface preparation & mixing instructions. Correct for the cause of any previous paint failures before applying this product. Although this coating may be applied over sound rust, it should not be applied over loose or powdery rust that is not tightly adhering to the substrate. This product must be topcoated when used in direct sunlight. This coating must be blended before it can be used. Any mixture of components will have the hazards of all of the components. Before opening the packages, read all warning labels. Follow all precautions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Bare Metal None Brush/Roller: Thin up to 10% by volume with xylene Bare Concrete K Waterborne Epoxy Sealer Airless Spray: Thin up to 10% by volume with xylene APPLICATION TEMP. Minimum: 45 o F Maximum: 90 o F STORAGE TEMP. Minimum: 50 o F Maximum: 90 o F TINTING Not to be tinted DRYING TIME To Recoat:: 7-8 hours (Good Conditions) Light Duty: 1-2 days Normal Use: 5-7 days PRACTICAL sq. ft./gal. REDUCTION Up to 10% by volume with xylene COVERAGE (Depends on substrate texture and porosity) RECOMMENDED Wet: mils CLEANUP Xylene FILM PER COAT Dry: mils PACKAGING AND DISTRIBUTION STANDARD Gallon 1 Gallon PACKAGING Gallon 1 Quart FREIGHT CLASS Flammable Paint MSDS Available upon request A division of the Harrison Paint Co Harrison Ave SW, Canton, OH Phone: (330) Customer Service: Fax: (330)

42 TECHNICAL DATA SHEET Interior/Exterior HEAVY-DUTY 2K EPOXY NON-SKID COATING /3/13 DESCRIPTION Two-component, high-build, solventborne coating. Provides a slip resistant surface for dry and wet conditions. Resists abrasion, impact, water, salt, and mild chemicals. More durable than most one-component anti-slip coatings. Low VOC formulation (compliant for most areas). PRODUCT CHARACTERISTICS RECOMMENDED USES Use to provide a slip resistant surface over interior and exterior concrete and metal substrates. Ideal for warehouse and factory floors, aisle-ways, parking decks, loading docks, ramps, steps and other areas where a heavy-duty, non-skid coating is desired. PRODUCTS/COLORS FINISH Gloss Base (Part A): Gray Safety Yellow VEHICLE Amine Catalyzed Epoxy Hardener (Part B): Clear Clear FORMULATION Formulated without lead, chrome and mercury PHYSICAL DATA (Mixed Components) GLOSS RATING N/A MIX RATIO 4 parts Base (Part A) to 1 part Hardener (Part B) VOLUME SOLIDS 92% ± 2.0 INDUCTION None POT LIFE 1 75 o F VOC CATEGORY Less than 100 grams/liter FLASH POINT 91 o F SURFACE PREPARATION & APPLICATION INSTRUCTIONS Read label directions for detailed surface preparation & mixing instructions. Correct for the cause of any previous paint failures before applying this product. This coating must be blended before it can be used. Any mixture of components will have the hazards of all of the components. Before opening the packages, read all warning labels. Follow all precautions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Bare Metal: None Brush/Roller: As is after mixing containers thoroughly Bare Concrete: K Waterborne Epoxy Sealer Squeegee/Trowel: As is after mixing containers thoroughly APPLICATION TEMP. Minimum: 50 o F Maximum: 90 o F STORAGE TEMP. Minimum: 50 o F Maximum: 90 o F TINTING Not to be tinted DRYING TIME To Recoat: Not normally necessary (Good Conditions) Light Duty: 1-2 days Normal Use: 3-5 days PRACTICAL sq.ft./gal. (Depends on application REDUCTION None COVERAGE method and substrate texture and porosity) RECOMMENDED Wet: mils (approx.. 1/32-1/16 ) CLEANUP Toluene or Methyl Ethyl Ketone (MEK) FILM PER COAT Dry: mils PACKAGING AND DISTRIBUTION STANDARD Gallon Kit 1 Gallon Kit PACKAGING FREIGHT CLASS Flammable Paint MSDS Available upon request A division of the Harrison Paint Co Harrison Ave SW, Canton, OH Phone: (330) Customer Service: Fax: (330)

43 TECHNICAL DATA SHEET Interior/Exterior 2K ACRYLIC ALIPHATIC POLYURETHANE /06/14 DESCRIPTION Two-component, high-solids, interior/exterior, solventborne coating. Provides a high gloss finish with exceptional durability including outstanding gloss & color retention and chalk & fade resistance. Tough, abrasion, & impact resistant film withstands repeated cleaning & many chemicals. PRODUCT CHARACTERISTICS RECOMMENDED USES Use as a high-build, high gloss finish for concrete & metal surfaces. Recommended for industrial, commercial, & marine applications such as storage tanks, water towers, oil rigs, bridges, tools & equipment, pipes, & buildings. Ideal for exterior exposures where a high performance coating with excellent weathering characteristics is desired. PRODUCTS/COLORS FINISH High Gloss Base (Part A): Tintable White Deep Tint Base VEHICLE Acrylic Polyurethane (Aliphatic Isocyanate) Clear Tint Base FORMULATION Formulated without lead, chrome and mercury Hardener (Part B): Clear PHYSICAL DATA (Mixed Components) VOLUME SOLIDS 62% ± 2.0 MIX RATIO 4 parts Base (Part A) : 1 part Hardener (Part B) FLASH POINT 66 o F INDUCTION None POT LIFE o F VOC (Theoretical) 323 grams/liter (mixed) Note: Mix ratio is by volume. Do Not vary proportions. Note: Data listed is for Tintable White. Other products in the line will be similar but will vary from these values. SURFACE PREPARATION & APPLICATION INSTRUCTIONS Read label directions for detailed surface preparation & mixing instructions. Correct for the cause of any previous paint failures before applying this product. New concrete & masonry must age a minimum of 28 days before coating. This coating must be blended before it can be used. Any mixture of components will have the hazards of all of the components. Before opening the packages, read all warning labels. Follow all precautions. RECOMMENDED PRIMERS Bare Ferrous & Aluminum Metal Bare Galvanizing Bare Concrete Cement Block None required (Epoxy or Inorganic Zinc primers may be used for added corrosion resistance) Contact representative None required None required (Block filler may be used for a smoother surface) RECOMMENDED APPLICATION Brush, Roller, Conventional & Airless Spray. Thin up to 10% by volume for brushing/rolling & 20% for spraying with Methyl Ethyl Ketone (MEK). Do Not thin beyond the VOC limits for the locality where the coating is being applied! APPLICATION TEMP. Minimum: 50 o F Maximum: 120 o F STORAGE TEMP. Minimum: 50 o F Maximum: 90 o F TINTING May be tinted with approved colorants DRYING TIME To Recoat: 8 hrs. min. 48 hrs. max. (Chromaflo 844 line suggested) (Good Conditions) Hard: 2-3 days PRACTICAL sq. ft./gal. REDUCTION See application above COVERAGE (Depends on substrate texture and porosity) RECOMMENDED Wet: mils CLEANUP Xylene and MEK FILM PER COAT Dry: mils PACKAGING AND DISTRIBUTION STANDARD Gallon Kit 1 Gallon Kit PACKAGING FREIGHT CLASS Flammable Paint MSDS Available upon request A division of the Harrison Paint Co Harrison Ave SW, Canton, OH Phone: (330) Customer Service: Fax: (330)

44 Technical Data Sheet Product #: Product Name: Description: Clear High Gloss Clear Flat 2K Waterborne Aliphatic Polyurethane A zero VOC, zero HAPs, low odor, catalyzed waterborne polyurethane. This product exhibits outstanding film hardness, impact, abrasion, corrosion, chemical, solvent, and UV resistance. It can be applied to interior or exterior, vertical or horizontal surfaces such as concrete, masonry, wood, aluminum, ferrous metal, and VCT. Excellent for use on floors or as a general purpose maintenance coating in industrial, commercial, and residential settings. Resists hot tire pick-up. Properties: Physical: Application: Color: Clear Viscosity: As is Weight/Gallon: 9.0 +/ lbs./gal. (mixed) Reduction: 8 fl oz per gallon for spraying Viscosity: KU (mixed) Reducer: Water Gloss: High Gloss >90% Clean Up: Soap and water Flat <6% Application Method: Brush/Roll/Spray Weight Solids: 54% +/- 2.0 (mixed) Coverage (sq.ft./gallon): /coat (2 coats required) Volume Solids: 47% +/- 2.0 (mixed) Wet Film Thickness: mils/coat Pot Life: o F Dry Film Thickness: mils/coat Mix Ratio: (by Volume) 80 oz Part A : 32 oz Part B Dry to Recoat: 4-6 hours (ideally) Mixing Time: 3-5 minutes 12 hours (required) Induction Time: None Salt Fog (ASTM B117): Passes 1000 hours VOC (theoretical): Zero Dry for light foot traffic: 24 hours Flash Point: 330 o F Dry for full foot traffic: 48 hours Shelf Life: 1 year minimum in unopened Full Cure: 5 days Storage: container at 77 o F. Store at o F in a dry place out of direct sunlight Note: Drying times are at 70 o F and 58% RH. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend dry times. Warmer temperatures and lower humidity will decrease dry times. Also Available: Notes: Mix Part A thoroughly then add the full contents of Part B to Part A and blend completely (3-5 minutes). A drill mounted impeller is recommended for best mixing. Do not add water to individual components. If needed for spraying, up to 8 fl. oz. of water may be stirred into the blended mixture. Apply when air and surface temperatures are o F and the relative humidity is less than 85%. Do not apply if rain is expected within 48 hours of application. Two coats are required at the recommended spreading rate. Do not exceed spreading rate as this may cause pinholes, micro-blistering, or a milky appearance. If over 12 hours lapses between coats, lightly scuff sand the surface and remove all dust before applying the next coat. Special colors. Contact us for details. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 10/25/13 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH Fax