PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS

Size: px
Start display at page:

Download "PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS"

Transcription

1 PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS

2 ULTRIMAX 1 ULTRIMAX 1 ULTRIMAX 1 THE NUMBER 1 FOR SAVING YOU TIME AND EFFORT ULTRIMAX 1 COMPLIANT PRIMER, GLOSS AND VALUE IN ONE Ultrimax 1 is a high build acrylicbased primer and topcoat in one. It can be applied easily - saving you both time and effort. And because it dries quickly, it won t be long before you re admiring the glossy finish. Available in an extensive range of colours, with excellent retention and anti-corrosive protection. ULTRIMAX 1 COMPLIANT Ultrimax 1 Compliant is a high solids primer and gloss in one. Being direct to metal and easy to apply saves you time, money and effort when you need it most. And with superb anti-corrosive qualities and an outstanding cosmetic finish, there s added value in every can. Air drying paint available in an extensive range of colours and gloss levels. Ideal for a glossy finish on metalwork such as plant & machinery, gates and railings, steel fabrications and architectural applications. No primer needed. Can be applied directly by brush or spray and will hard dry in 2-3 hours. Contains zinc phosphate anti-corrosive properties and a high volume of solids. Suitable for interior and exterior use on decorative and structural steel, sheet metal and many other substrates. Can be force dried and possesses moderate heat resistance. Offers good chemical resistance when fully cured. Ideal for helping to reduce emissions. ULTRIMAX 1 ULTRIMAX 1 COMPLIANT VOLUME SOLIDS 55% 62% VOC 440g/litre 340g/litre FLASH POINT 21ºC 28ºC Dry microns Wet microns TYPICAL SPREAD RATE 4.5 m2/l 4.5 m2/l THINNER / CLEANER Xylene Xylene Surface dry: 20 minutes Hard dry: 2-3 hours Dry microns Wet microns Surface dry: 90 minutes Hard dry: 48 hours APPLY WITH Brush or spray Spray, brush or roller PACK SIZE 5, 20 or 200 litre 5, 20 or 200 litre 2 / 3

3 ULTRIPRIME ULTRIPRIME ULTRIPRIME THE PRIMER THAT UNDERPINS A FANTASTIC FINISH ULTRIPRIME 2 HS THE PRIMER THAT STANDS TOUGH IN THE FACE OF CHEMICALS Ultriprime lays the foundations for a great paint finish. This single pack primer is alkyd based, fast drying and with a high percentage of volume solids. Formulated with zinc phosphate pigments, it guarantees an anti-corrosive, longlasting protection to steel. Perfect for structural steelwork, machinery, agricultural equipment and a variety of fabrication jobs. ULTRIPRIME 2 HS Ultriprime 2 HS is based on a epoxy resin and is ideal for metals situated in chemical or aggresive environments. Just as effective as Ultriprime, this primer is versatile, high performance and provides peace of mind - it performs exactly as an undercoating should. Formulated with zinc phosphate pigments to guarantee an anti-corrosive, long-lasting protection to steel. Suitable to be used under almost any topcoat and also intumescent coatings. Apply easily by brush or spray. Once applied will surface dry in 15 minutes and hard dry in 90 minutes. Special colours available on request. Suitable to be used with most types of paint. Can be force dried and possesses moderate heat resistance. Suitable for galvanised steel and aluminium after appropriate cleaning. Mixing ratio: 4 parts paint, 1 part hardner FINISH ULTRIPRIME ULTRIPRIME 2 HS Matt VOLUME SOLIDS 58% 64% FLASH POINT 23ºC 22ºC Dry - 75 microns Wet microns Dry: 75 microns Wet: 100 microns TYPICAL SPREAD RATE 7.5 m2/l 8.5 m2/l THINNER / CLEANER / HARDENER Xylene Touch dry: 15 minutes Hard dry: 1.5 hours Epoxy thinner Ultriprime 2 HS hardener Touch dry: 1.5 hours Hard dry: 6 hours APPLY WITH Brush or spray Spray, brush or roller PACK SIZE 5, 20 or 200 litre 20 litre COLOURS Red, Grey, White, Buff and Black Grey 4 / 5

4 ULTRITHANE ULTRITHANE ULTRITHANE INDUSTRIAL, DURABLE AND WITH A HIGH-QUALITY GLOSS ULTRITHANE 2 ULTRA HIGH GLOSS FINISH THAT S MADE TO LAST Ultrithane is a single pack polyurethane, which provides a durable and very high gloss topcoat which is designed to stand up to heavy use. This makes it ideal for a wide range of industrial applications such as plant, machinery, agricultural equipment and commercial vehicles. Available in an extensive range of colours, each with excellent colour and gloss retention. ULTRITHANE 2 Ultrithane 2 is a highly-durable two-pack gloss finishing coat. Like its stable mate Ultrithane, it s an acrylic polyurethane with an exceptional level of gloss, making it the perfect foil for painting agricultural machinery, industrial equipment and metal structural work. Available in a huge range of colours. Ultrithane 2 requires mixing with a suitable hardener and thinner before use. Very high, quality gloss finish with good durability and weather resistance. Easy to use (no mixing and minimal wastage). apply by spray, brush or roller. Isocyanate-free for safe use and peace of mind. High-quality gloss finish with extreme durability for aggressive environments. Excellent retention of both gloss and colour. Offers full resistance to most solvents and chemicals. Mixing ratio: 2 parts paint, 1 part hardener, 10-20% thinner. ULTRITHANE ULTRITHANE 2 FLASH POINT 32ºC 28ºC POT LIFE 4 hours VOLUME SOLIDS 42% 58% VOC 449g/litre 420g/litre TYPICAL FILM THICKNESS Dry - 40 microns Wet - 95 microns TYPICAL SPREAD RATE 10 m2/l 8 m2/l THINNER / CLEANER / HARDENER Synthetic Thinner Surface dry: 1.5 hours Hard dry: 6-8 hours Dry - 40 microns Wet - 90 microns Universal 2K Thinner Universal 2K Activator Touch dry: 4-6 hours Hard dry: 24 hours APPLY WITH Brush, spray or roller Air mix or conventional spray gun PACK SIZE 5 litre or 20 litre 5 litre or 20 litre 6 / 7

5 ULTRIMAX 2 & 3 ULTRIMAX 2 THE SAFE TO USE ACRYLIC TOPCOAT WITH INCREDIBLE COVERAGE ULTRIMAX 3 THE ANTI-CORROSIVE EPOXY FAVOURITE ULTRIMAX 2 Ultrimax 2 is a two pack acrylic topcoat paint. Designed to be used over a two pack epoxy primer, it provides a gloss finish with good colour retention. And just like Ultrimax 1, it s extremely tough, offering excellent durability and resistance to both water and chemicals. Available in a range of standard and bright colours, or matched to a specific sample. ULTRIMAX 3 Ultrimax 3 is a two pack epoxy topcoat. With superb chemical and weathering resistance properties, it s perfect to refinish substrates that are subjected to corrosive substances, leaving behind a quality, glossy finish. Designed to be used over an epoxy primer, Ultrimax 3 is easy to apply, fast drying and offers good coverage. Safe to use; no isocyanates. Easy to apply and with excellent coverage. Apply with spray (or brush and roller for smaller areas) for a 12-hour hard dry. Mixing ratio: 2 parts paint, 1 part hardner Available in a range of colours. Available in lead chromate-free options. Mixing ratio: 4 parts paint, 1 part hardner Ideal for aggresive environments. VOLUME SOLIDS 50% 54.3% VOC 480g/litre 386g/litre FLASH POINT 23ºC 23ºC Dry - 75 microns Wet microns TYPICAL SPREAD RATE 8 m2/l 8 m2/l THINNER / CLEANER / HARDENER ULTRIMAX 2 ULTRIMAX 3 Universal 2K thinner Ultrimax 2 hardener Surface dry: 2 hours Hard dry: 12 hours Dry - 60 microns Wet - 80 microns Epoxy thinner Ultrimax 3 hardener Surface dry: 1 hours Hard dry: 12 hours APPLY WITH Spray, brush or roller Spray, brush or roller PACK SIZE 5 litre or 20 litre 5 litre or 20 litre POT LIFE 8 hours at 20ºC 8 hours at 20ºC 8 / 9

6 ULTRIMAX GLOSS ULTRIMAX GLOSS THE HIGHLY- VERSATILE, FAST-DRYING GLOSS ULTRIMAX SG THE SEMI GLOSS THAT S MADE FOR METAL ULTRIMAX GLOSS Ultrimax Gloss is a highly-versatile topcoat gloss paint that can be used on a variety of plant equipment, machinery and steel products. Not only does it offer a high gloss finish, it also dries in record time - meaning you can tick one job off the list sooner. Available in a full choice of colours, each with excellent gloss retention and resistance to corrosion. ULTRIMAX SG Ultrimax SG is a high build, one-coat, semi-gloss paint. Easy to apply directly to metal, with a non-sag, anti-corrosive finish. Ideal for containers, cabins and skips - whether they re new or refurbished. Available in an extensive range of colours, with excellent retention and anticorrosive properties. Ideal for a glossy finish on sheet metal, tools, gates and railings, and general steel fabrications. Use with Ultriprime and apply with spray (brush or roller suitable for smaller areas). Surface dries in 30 minutes and handleable in minutes (hard dry in 6-8 hours). Also available in matt finish. Designed for a range of applications such as metal stillage s, storage tanks and portable accommodation units. No primer needed. Suitable for spray application, brush and roller, and will hard dry in 2 hours. Contains zinc phosphate anticorrosive pigments. VOLUME SOLIDS 50% 47% VOC 435g/litre 455g/litre FLASH POINT 24ºC 21-31ºC Dry - 40 microns Wet - 85 microns TYPICAL SPREAD RATE 10 m 2 /L 6.5 m 2 /L THINNER / CLEANER Xylene Xylene ULTRIMAX GLOSS Surface dry: 30 minutes Hard dry: 6-8 hours ULTRIMAX SG Dry - 75 microns Wet microns Surface dry: 1 hours Hard dry: 2 hours APPLY WITH Brush, spray or roller Brush, spray or roller PACK SIZE 5 litre or 20 litre 5 litre or 15 litre 10 / 11

7 ULTRIZINC ULTRIPRIME MIO ULTRIZINC THE ANTI-RUST HEAVYWEIGHT PRIMER ULTRIPRIME MIO THE ANTI-RUST HEAVYWEIGHT PRIMER ULTRIZINC Ultrizinc Primer is perfect for fabrication and shop environments. Based on a synthetic polymer which contains over 92% zinc (by weight when dry), the primer provides cathodic protection to steel. In other words, a barrier coating which prevents the spread of rust. Available in grey, for a matt finish. Once applied Ultrizinc will hard dry in 2-4 hours. ULTRIPRIME MIO Ultriprime MIO is a micaceous iron oxide (MIO) primer which is perfect for applying high build base layers to structural steel. Formulated with a synthetic modified alkyd resin containing zinc phosphate, it offers outstanding anti-corrosive qualities. And with it being air-drying and exceptional wet on wet, with itself and with most alkyd paints, Ultriprime MIO also excels with over coating. Excellent overcoating properties when applied wet on wet, with itself and with most alkyd based paints. Once applied will touch dry in 15 minutes and hard dry in 2-4 hours. Ready to use with airless spray or brush. Conventional spray requires up to 20% thinners. Heat resistant to 400 C. Excellent anti-corrosive properties. Recommended to apply by brush (spray or roller also suitable). Touch dry in 60 minutes and hard dry in 24 hours. VISCOSITY 2.2 poise (thixotropic) 3.5 poise (thixotropic) VOC 380g/litre 430g/litre FLASH POINT 24ºC 32ºC TYPICAL SPREAD RATE 15 m2/l (25 microns) 8 m2/l (50 microns) 6-8 m2/l (50 microns) RECOMMENDED 50 microns DFT 50 microns DFT THINNER / CLEANER Xylene Xylene ULTRIZINC Touch dry: 15 minutes Hard dry: 2-4 hours Touch dry: 60 minutes Hard dry: 24 hours APPLY WITH Spray or brush Spray, brush or roller PACK SIZE 1 litre or 4 litre 5 litre ULTRIPRIME MIO COLOURS Grey Grey and Black 12 / 13

8 ULTRIPRIME ETCH ULTRIPRIME ETCH THE PRIMER THAT S GALVANISED FOR ACTION ULTRIPRIME 2K ETCH THE TWO PART PRIMER FOR INCREASED ADHESION ULTRIPRIME ETCH Ultriprime Etch is a single pack PVB primer which is formulated with zinc phosphate anti-corrosive pigments to protect aluminium and galvanised metal. With a high one-coat build and no webbing when sprayed, Ultriprime Etch offers great usage and value for money. Can be over coated with most types of paint finishes and also provides good resistance to heat. ULTRIPRIME 2K ETCH Ultriprime 2K Etch is a two part etch primer designed for pre-treating aluminium or galvanised metal. Applied as an undercoat to ferrous and non-ferrous metals, Ultriprime 2K Etch will not only improve the bond of subsequent topcoats of paint, it will also line the surface with short-term corrosion inhibiting properties. Ready for use with airless spray or brush, conventional spray requires up to 20% thinners. Recommended to be used in conjunction with Etch Primer Thinner. Once applied will surface dry in 15 minutes and hard dry in 2-4 hours. Easy to apply and providing excellent levels of coverage. Once applied will touch dry in 15 minutes and be ready for over coating in 12 hours. Drying times will be extended at low temperatures. Mixing ratio: 1 part paint, 1 part hardner ULTRIPRIME ETCH GLOSS LEVEL Slight sheen Matt VISCOSITY 195 B4 / 20 C FLASH POINT 23ºC 10ºC Weld through operation apply microns ULTRIPRIME 2K ETCH Weld through operation apply microns TYPICAL SPREAD RATE 8-10 m2/l Approx. 15 m2/l THINNER / CLEANER Etch primer thinner Ultriprime 2K Etch thinners Surface dry: 15 minutes Hard dry: 24 hours Touch dry: 15 minutes Hard dry: 12 hours APPLY WITH Brush or spray Airless or Conventional spray PACK SIZE 5 litre 5 litre VOC Less than 780 g/l 14 / 15

9 ULTRIMAX HAMMER FINISH ULTRIMAX POWDER ULTRIMAX HAMMER FINISH MADE FOR METAL AND IMPERFECTIONS ULTRIMAX POWDER THE NEW VERSATILE RANGE OF POWDER COATINGS ULTRIMAX HAMMER FINISH Ultrimax Hammer Finish is a decorative and protective paint that s perfect for covering imperfections on metal surfaces. Easy to apply and with excellent durability, this product can also be used as a one coat satin finish on internal metal surfaces. Available in a range of classic colours that provide good levels of coverage. Colours include Jet Black, Silver, Green, Blue & Red ULTRIMAX POWDER Ultrimax Powder is available as a Polyester (providing hard, durable and protective coatings for exterior environments), Epoxy Polyester (ideal for general machinery parts that have limited exposure to sunlight) or Epoxy type (for general machinery parts but where maximum hardness, and chemical and solvent resistance are crucial). Available in a range of colours to provide any gloss level or finish effects e.g. ripple, leatherette, textures, hammers. Possesses moderate heat resistance and contains no lead-based pigments. External and non-ferrous metal surfaces should be primed before use. Hard dry in 24 hours or can be force dried (gloss levels may be affected). Does not contain any solvents so the VOC emissions are basically zero Unused or over sprayed powder can be recovered, so any waste is minimal and can be disposed of easily and safely. Epoxy: This offers a high degree of surface hardness, wear and tear as well as excellent resistance to solvents and chemicals. Polyester: This uses Thermosetting resins giving a hard durable protective coating especially for exterior environments with minimal gloss reduction, chalking or colour change. VISCOSITY Approx. 95 seconds BS 20 C SPRAYING VISCOSITY FLASH POINT 28ºC THINNER / CLEANER SALT SPRAY TESTED IMPACT RESISTANCE COVERAGE RATE APPLICATION CONDITIONS COLOURS HUMIDITY TESTED SCRATCH RESISTANCE Typically 90 seconds dependent on spray equipment Dry 50 microns Xylene Touch dry: 15 minutes Hard dry: 24 hours APPLY WITH PACK SIZE VOC TYPICAL SPREADING RATE Spray VOLUME SOLIDS 38% ULTRIMAX HAMMER FINISH 5 litre or 20 litre 580g/litre m2/l ULTRIMAX POWDER Minimum 1000 hours BS3900F4 Excellent pass rate of 100 inch pounds BS3900E square metres per 60 microns film thickness. (Theoretical only - may differ depending on the type of object to be coated and the colour applied.) 60 microns film on 0.5 mm degreased cold rolled steel. Spray tension: 60kv Curing: c in air circulation oven (object temperature) BS4800, BS381C, BS2660, Ral, Munsel, Pantone, Dulux, Fluorescent or free colour matching available hours BS3900F2 BS3900E2-4kg load pass 16 / 17

10 AQUIMAX PRIMER AQUIMAX AQUIMAX PRIMER THE ANTI-RUST WATER-BASED PRIMER AQUIMAX TOPCOAT THE STRONG AND LONG-LASTING WATER-BASED TOPCOAT Aquimax Primer has all the qualities you d expect from a water-based primer. It s fast drying, anti-corrosive and suitable for all kinds of steel and sheet metal surfaces, whether they re decorative or structural. Non-hazardous and safe to use, Aquimax Primer is available in several colours including Grey, Red, Black & Green. Other colours available on request. AQUIMAX TOPCOAT Aquimax Topcoat is the perfect complement to Aquimax Primer. Just like its brother this topcoat is water-based and fast drying. And because it s based on synthetic resin, it quickly develops hardness and handling, resulting in a strong and long-lasting coating. Non-hazardous and meeting environmental legislation, Aquimax Topcoat is available in a range of standard colours to provide a gloss finish. Based on high solids acrylic emulsion and zinc phosphate anticorrosion pigments. Once applied will touch dry in 12 minutes and hard dry in 24 hours. Use of ambient air flow across coated article will significantly reduce drying times Safe to use and very low in VOC content To be applied over Aquimax Primer by spray, brush or roller. Provides good adhesion on most substrates. Touch dry in 20 minutes, hard dry overnight. Can be over coated with itself after an hour (depending on conditions). Safe to use and very low in VOC content VISCOSITY SPRAYING VISCOSITY AQUIMAX PRIMER Approx. 135 seconds Ford 4 20 C Typically 90 seconds dependent on spray equipment FLASH POINT 10ºC 23ºC Wet 70 microns Dry 30 microns TYPICAL SPREAD RATE Approx m 2 25μ DFT THINNER / CLEANER Water Water Touch dry: 12 minutes Hard dry: 24 hours AQUIMAX TOPCOAT Approx. 95 seconds BS 20 C Typically 90 seconds dependent on spray equipment Wet 70 microns Dry 30 microns Approx m 2 /L Touch dry: 20 minutes Hard dry: 12 hours APPLY WITH Spray, brush or roller Spray, brush or roller PACK SIZE 5 litre or 20 litre 5 litre or 20 litre VOC 70g/litre Approx. 135g/litre VOLUME SOLIDS Typically 50% Typically 45% 18 / 19

11 ULTRIMAX T-WASH CELLIMAX T ULTRIMAX T-WASH ULTRIMAX T-WASH THE PRE-TREATMENT SOLUTION THAT SIGNALS SUCCESS Ultrimax T-Wash is a pre-treatment solution for galvanised, aluminium and zinc surfaces before painting. It s an extraclever blue solution that turns treated surfaces black when properly applied. If the colour does not change it is a sign that the pre-treatment has not been effective - usually due to improper cleaning or degreasing of the surface. CELLIMAX THE FAST DRYING INDUSTRIAL TOPCOAT CELLIMAX Cellimax is an industrial cellulose topcoat which provides a high-quality glossy finish. Being based on a cellulose organic compound makes this coating one of the fastest drying on the market - meaning painted objects can be quickly stacked. Ideal for small jobs and touch-up work, Cellimax is the choice for professionals and weekend DIY enthusiasts alike. E. sales@ultrimaxcoatings.co.uk Product contains a small amount of phosphoric acid. Wear suitable goggles, facemasks and gloves. ULTRIMAX T-WASH CELLIMAX VOLUME SOLIDS 32% Apply with brush or swab and allow for colour change conversion. VOC 580g/litre Make sure surfaces are dry before painting. Dry: 35 microns Wet: 110 microns Washed off with clean water, leaving a clean substrate that is ready for primer. TYPICAL SPREAD RATE 12.5 m2/l THINNER / CLEANER Premium Surface dry: 5 minutes Hard dry: 1 hour FLASH POINT 28ºC 32ºC APPLY WITH Brush or swab Conventional spray gun PACK SIZE 5 litre or 20 litre 1, 2.5 or 5 litre Recommended to be used with a premium thinner. Apply by spray, brush or roller. Available in 1 litre, 2.5 litre and 5 litre sizes. Full range of colours available. Very fast drying. 20 / 21

12 FLORMAX FLORMAX FLORMAX THE FLOOR PAINT TO SUPPORT YOUR NEEDS Flormax is a quick-drying single pack floor paint that s easily applied to most floor surfaces including concrete, timber and steel. If there s one area that s going to take a lot of abrasion, it s underfoot. So, Flormax is particularly suitable for warehouses, factories and garages, due to its high durability. New resin-technology formula provides impressive adhesion, coverage and protection. Standard colours include Red, Grey, Green & Yellow. A single pack paint that requires no mixing. Available in a range of colours with a high volume of solids. Surface dry in less than an hour leaving a semi gloss finish - resistant to both chemicals and oil. Anti Skid additive available for a finish that s extra textured and tough. VOLUME SOLIDS 55% VOC FLORMAX 420g/litre FLASH POINT 32ºC TYPICAL SPREAD RATE THINNER / CLEANER APPLY WITH PACK SIZE Dry: 50 microns Wet: 85 microns 8 m2/l White spirit Surface dry: 60 minutes Hard dry: 12 hours Brush or roller 5 litre or 20 litre 22 / 23

13 Clayfield Industrial Estate Tickhill Road Doncaster DN4 8QG T F E.

Product Guide Issue I

Product Guide Issue I Product Guide Issue 63 2014 At Marathon we are passionate about paint. Our focus to provide a range of quality industrial paints, has resulted in Marathon coatings being specified on countless projects

More information

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version:

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version: PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing

More information

DULUX UNIVERSAL UNDERCOAT

DULUX UNIVERSAL UNDERCOAT TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT

More information

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version:

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version: PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible

More information

Product Data Sheet August 2006 (Updated in December 2014)

Product Data Sheet August 2006 (Updated in December 2014) Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey

More information

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY). Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as

More information

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied

More information

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

More information

AquaCLAD Water-Reducible Rust Preventative Alkyd

AquaCLAD Water-Reducible Rust Preventative Alkyd AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High

More information

HP Epoxy Primer P

HP Epoxy Primer P Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy

More information

Product Information DP5000

Product Information DP5000 GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range

More information

January 2007 Product Information DELTRON D821

January 2007 Product Information DELTRON D821 GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.

More information

Product Data Sheet November 2016

Product Data Sheet November 2016 Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer

More information

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion

More information

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments. Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining

More information

HP Chromate Free Epoxy Primer P /-4505/-4510

HP Chromate Free Epoxy Primer P /-4505/-4510 Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free

More information

Unit PO0205K Knowledge of Applying Fillers and Foundation Materials

Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:

More information

PRODUCT GUIDE: CATALYZED TOPCOATS. Version:

PRODUCT GUIDE: CATALYZED TOPCOATS. Version: PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane

More information

Volume Solids % Weight Solids %

Volume Solids % Weight Solids % Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane

More information

UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS

UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:

More information

Data Sheet 5741 Englisch

Data Sheet 5741 Englisch Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl

More information

HAMMERITE DIRECT TO RUST HAMMERED AND SMOOTH

HAMMERITE DIRECT TO RUST HAMMERED AND SMOOTH TECHNICAL DATA SHEET Version 1 2016 June THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A corrosion resistant and decorative coating for ferrous and nonferrous metals, wood and certain

More information

2K weather resistance clear coat A850

2K weather resistance clear coat A850 Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance

More information

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal

More information

INDUSTRIAL METAL COATINGS SYSTEM GUIDE

INDUSTRIAL METAL COATINGS SYSTEM GUIDE METAL SYSTEMS General Purpose Metal Systems- The following systems are recommended for general industrial interior and exterior applications. Such applications include office furniture, shelving, electrical

More information

Teknos Key Products for General Industry & Heavy Duty

Teknos Key Products for General Industry & Heavy Duty Teknos Key Products for General Industry & Heavy Duty Paints and coatings for General Industry and Heavy Duty applications R&D is in the heart of Teknos Teknos offers a comprehensive product portfolio

More information

Duraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications

Duraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications PAGE 1 OF 5 Description & Uses Solver Duraguard Matt is an ultra premium quality, 100% acrylic, self priming exterior water-based coating, suitable for direct application to most surfaces including timber,

More information

Metal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces

Metal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,

More information

FLAME RETARDANT PAINTS. A colourful range of decorative finishes, which will provide Class 1 and Class 0 ratings to BS 476 Parts 6&7

FLAME RETARDANT PAINTS. A colourful range of decorative finishes, which will provide Class 1 and Class 0 ratings to BS 476 Parts 6&7 FLAME RETARDANT PAINTS A colourful range of decorative finishes, which will provide Class and Class ratings to BS 476 Parts 6&7 INTRODUCTION TO FLAMEGUARD PAINTS FIRE PROTECTION A comprehensive range of

More information

Product Information PRIMA D839 2 Component Primer

Product Information PRIMA D839 2 Component Primer GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick

More information

UNIT REF: PO13K UNIT TITLE: KNOWLEDGE OF VEHICLE COLOUR MATCHING

UNIT REF: PO13K UNIT TITLE: KNOWLEDGE OF VEHICLE COLOUR MATCHING UNIT REF: PO13K UNIT TITLE: KNOWLEDGE OF VEHICLE COLOUR MATCHING Level: 3 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO13 Rationale: This unit enables the learner

More information

In addition to point 1. containers face the following corrosive conditions like :

In addition to point 1. containers face the following corrosive conditions like : THE DEVELOPMENT OF CONTAINER COATINGS There are now in excess of 4 million TEU in the world they predominate the world trades, and are frequently seen on the oceans, rivers, roads, rails and even airplanes

More information

SELECTION AND PREPARATION OF SUBSTRATES

SELECTION AND PREPARATION OF SUBSTRATES 592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates

More information

Industrial paints for metal surfaces. Product catalogue

Industrial paints for metal surfaces. Product catalogue Industrial paints for metal surfaces Product catalogue This catalogue provides a brief overview of the Tikkurila standard industrial product range for metal surfaces. Contents Solvent-borne alkyd paints

More information

PRODUCT GUIDE: CATALYZED PRIMERS. Version:

PRODUCT GUIDE: CATALYZED PRIMERS. Version: PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and

More information

March 2009 Product Information RAPID GREYMATIC 2K Filler

March 2009 Product Information RAPID GREYMATIC 2K Filler GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,

More information

FIRST EDITION 2 NEW 14 SALES TIKKURILA TO BOOST INDUSTRIAL SERVICES TOOLS PRODUCTS IMPULSE 2015

FIRST EDITION 2 NEW 14 SALES TIKKURILA TO BOOST INDUSTRIAL SERVICES TOOLS PRODUCTS IMPULSE 2015 2015 FIRST EDITION 2 NEW PRODUCTS 4 TIKKURILA TO BOOST INDUSTRIAL SERVICES 14 SALES TOOLS IMPULSE 2015 2015 More boost into Tikkurila Industrial Paint Service Jarkko Mattila TIKKURILA GROUP BUSINESS DEVELOPMENT

More information

Specification Guide. Portable & Modular Buildings

Specification Guide. Portable & Modular Buildings Specification Guide Portable & Modular Buildings Table of Contents Page Introduction Identifying painting requirements 3 How do I use this specification guide 3 Contacting my local Axalta Coating Systems

More information

INDUSTRIAL PAINTS INDUSTRIAL TOP COAT 6 GENERAL 6 ACRYLIC LACQUERS 8 ALKYD LACQUERS 10

INDUSTRIAL PAINTS INDUSTRIAL TOP COAT 6 GENERAL 6 ACRYLIC LACQUERS 8 ALKYD LACQUERS 10 COLORS www.soppec.com EVENT COLORS PRO TECH INDUSTRIAL PAINTS In all industrial or agricultural activities it is important to be able to carry out rapid repairs to damaged paintwork, (notably to machinery

More information

Technical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY

Technical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY 100 2505-001/005 50 2505-104 40 2505-204 2505-205 12 Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates..

More information

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding

More information

For questions, concerning corrosion protection, contact our Mr. Franke under Telephone No. +49-(0) , or Fax No.+49-(0) ).

For questions, concerning corrosion protection, contact our Mr. Franke under Telephone No. +49-(0) , or Fax No.+49-(0) ). SCHORCH Paint System (Author: Hinrichs / Dep. Q1) Contents 1: General 2: Warranty / paint systems to customers specifications 3: Contact person at SCHORCH 4: Attached index 5: Site conditions of SCHORCH

More information

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter.

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter. Knowledge Requirements Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator trainthepainter.com Knowledge Requirements The Knowledge Requirements the protective coatings

More information

Paints for sheet-iron roofs. For corrosion protection of metal surfaces outdoors

Paints for sheet-iron roofs. For corrosion protection of metal surfaces outdoors Paints for sheet-iron roofs For corrosion protection of metal surfaces outdoors 2 On roofs since 1964 Metallic roofing materials have been used for protecting the roofs of wooden houses since the 19th

More information

Craftmaster Paints Ltd 2018 Catalogue

Craftmaster Paints Ltd 2018 Catalogue Ordering To order any of the products in this catalogue you can either: Call us between 9am and 5pm Monday Friday on 01954 231 308. Or visit our website www.craftmasterpaints.co.uk and order the majority

More information

General description: Two-component high-build, high solids surface tolerant universal epoxy coating. For painting on steel and galvanized steel substrates. Certified for systems category C5I High ISO 12944.

More information

Sequoia Marketing Sdn. Bhd. Acrylic Wall Sealer. Woodpecker. 1 of 20

Sequoia Marketing Sdn. Bhd. Acrylic Wall Sealer. Woodpecker. 1 of 20 Marketing Sdn. Bhd. Acrylic Wall Sealer Woodpecker 1 of 20 2 of 20 Roadline Fibre Cement Coating 3 of 20 4 of 20 Fibre Cement Coating Auto-paint shine-2-1 5 of 20 Acrylic Undercoat product Product Acrylic

More information

Impredur Silk Matt Enamel 880

Impredur Silk Matt Enamel 880 Data Sheet Silk Matt Enamel 880 aromatics-free, premium quality, for exterior and interior use Field of Application Properties Material description Standard colors Gloss grade Base material For high-quality

More information

Surface Finishes. For woods metals and plastics

Surface Finishes. For woods metals and plastics Surface Finishes For woods metals and plastics Reasons for Surface Finishes Some kind of surface finish is always necessary for the following reasons Resistance to decay (Stopping the material from rotting

More information

CORROSION EXPERTISE OWATROL OIL.

CORROSION EXPERTISE OWATROL OIL. CORROSION EXPERTISE OWATROL OIL www.owatrol.com OWATROL OIL Used for over 60 years throughout the world, Owatrol has played an important part in interior and exterior maintenance painting for leading industrial

More information

These Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881.

These Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881. For product description refer to product data sheet HEMPADUR MASTIC 45880/ HEMPADUR MASTIC 45880/ High temperatures: 45881: BASE 45889 with CURING AGENT 95881 Low to medium temperatures: 45880: BASE 45889

More information

Use suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.

Use suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator. Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The

More information

INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION

INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION Harrison Paint Company 1329 Harrison Avenue SW Canton, Ohio 44706 U.S.A. (800) 321-0680 Fax (330) 454-1750 PRIMERS 961 LINE SHOPCOAT PRIMER GRAY,

More information

COLOUR SHADES - OVERVIEW

COLOUR SHADES - OVERVIEW Product Data Sheet Pad Printing Ink TP 218/GL Solvent Based Pad Printing Ink Range, 2-Component APPLICATION Pad printing inks for printing on glass, ceramics, duroplastics, metals as well as chromium and

More information

Advantages of Powder Coating vs. Wet Paint

Advantages of Powder Coating vs. Wet Paint Advantages of Powder Coating vs. Wet Paint F irst pioneered in the 1950s, powder coating has evolved as a popular dry finishing process used for functional (protective) and decorative finishes in manufacturing.

More information

05 Paints & primers. 1 Spray Primers 4 Spray Paints 4 Sprayer for Spray Cans 7 Perfect Metal Surface Sprays 9 Paint Markers 9 Micro brushes

05 Paints & primers. 1 Spray Primers 4 Spray Paints 4 Sprayer for Spray Cans 7 Perfect Metal Surface Sprays 9 Paint Markers 9 Micro brushes 05 Paints & primers 1 Spray Primers 4 Spray Paints 4 Sprayer for Spray Cans 7 Perfect Metal Surface Sprays 9 Paint Markers 9 Micro brushes JULY PAINTS & PRIMERS 1 SPRAY PAINT PRIMERS An industrial primer

More information

WATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS

WATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS WATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS Björn Borup, Philipp Albert, Helmut Mack Evonik Industries, Germany Introduction Regulatory pressure and increasing

More information

colors FOR ALUMINUM WINDOWS & DOORS (INTERIOR & EXTERIOR)

colors FOR ALUMINUM WINDOWS & DOORS (INTERIOR & EXTERIOR) colors FOR ALUMINUM WINDOWS & DOORS (INTERIOR & EXTERIOR) When it comes to color choices for our aluminum windows and doors, we have no limitations. We break it down into 4 categories: Popular Colors,

More information

Marking & Identification

Marking & Identification Marking & Identification Section Contents Artline Markers 140,141 Scribe Markers 141 Jumbo Markers 140 Refillable Markers 140,142 Paint Markers 143 Ball Marker 142 Stencilling 144 Car Park Stencil Kit

More information

Magnetpaint & Sketchpaint

Magnetpaint & Sketchpaint Magnetpaint & Sketchpaint Turn any smooth surface into a magnetically receptive whiteboard MagnetPaint is an exciting product that allows you to paint your own magnetic surface on any flat area. SketchPaint

More information

SHELDON Versatile seating

SHELDON Versatile seating UK street furniture designers & manufacturers As UK based, designers and manufacturers, Street Design can manufacture and supply Sheldon seating to suit your specific requirements. Sheldon versatile seating

More information

Technical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY

Technical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY 4 3505-002 1 3505-105 0.5 3505-204 Description: High solid two-pack epoxy primer-surfacer providing excellent appearance and corrosion protection. The target use for this product is refinishing and refurbish

More information

13 Congresso Internacional de Tintas 13ª Exposição Internacional de Fornecedores para Tintas

13 Congresso Internacional de Tintas 13ª Exposição Internacional de Fornecedores para Tintas HIGH PERFORMANCE ADDITIVES FOR WATER BASED AND LOW VOC PAINTS AND COATINGS Daniel de Moura Massarente, Wolfgang Geuking Croda Coatings and Polymers The replacement of solvent-based coatings by water based

More information

Armourcote epoxy primer Armourcote brushing epoxy primer Armourcote high solids epoxy Armourcote epoxy enamel Armourcote 515

Armourcote epoxy primer Armourcote brushing epoxy primer Armourcote high solids epoxy Armourcote epoxy enamel Armourcote 515 Resene product range Data Sheet # Includes Resene premium paints, sealers, primers, undercoats, Engineered Coating Systems and Decorator products for film integrity (no peeling/flaking). Excludes colour

More information

Corporate Headquaters 3B-27, 2nd Floor, 3rd Block, MS Industrial Complex, 488B, 14th Cross Road, 4th Phase, Peenya Industrial Area, Peenya, Bangalore

Corporate Headquaters 3B-27, 2nd Floor, 3rd Block, MS Industrial Complex, 488B, 14th Cross Road, 4th Phase, Peenya Industrial Area, Peenya, Bangalore One Source Speciality Fasteners International brings together the best suppliers of adhesives, sealants, encapsulants, coatings, Primers tapes, and assembly equipment and supplies for Industrial Manufacturing.

More information

Superyacht Finishing. Stuart Downie FIMF 5/10/2016. Working together for a safer world

Superyacht Finishing. Stuart Downie FIMF 5/10/2016. Working together for a safer world Superyacht Finishing Stuart Downie FIMF 5/10/2016 Working together for a safer world Introduction Why does the painting of superyachts deserve a presentation? How does the painting of superyachts differ

More information

Primer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1

Primer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1 08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,

More information

Product Information FILLERS

Product Information FILLERS GLOBAL REFINISH SYSTEM February 2010 Product Information FILLERS PRODUCTS Galvaplast 77 - Multi Purpose Polyester A656 Multi Purpose A722 - Flexible Polyester Putty - Standard Polyester A1 - Polyester

More information

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst

More information

Big Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)

Big Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT

More information

SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY

SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY REV. DATE DESCRIPTION OF CHANGE AND REASON FOR CHANGE A JUNE 10, 1999 NEW ISSUE B JULY

More information

Gray Urethane Surfacer (Low VOC)

Gray Urethane Surfacer (Low VOC) Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet

More information

Sketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days

Sketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²

More information

K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)

K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer

More information

CG 303 Quality assurance scheme for paints and similar protective coatings

CG 303 Quality assurance scheme for paints and similar protective coatings Design Manual for Roads and Bridges Highway Structures & Bridges General information CG 303 Quality assurance scheme for paints and similar protective coatings (formerly BD 35/14) Revision 0 Summary This

More information

Key products guide: External water based preservatives and isolating products

Key products guide: External water based preservatives and isolating products water based preservatives and isolating products Teknol Aqua 1410 A topical preservative meeting Class 3, BS EN 335-1 when used in Teknos factory applied protection system Tested to BS EN 599-1 BPD, NHBC

More information

COATINGS. Trends Concerning Surfaces. Glass lacquers the design element.

COATINGS. Trends Concerning Surfaces. Glass lacquers the design element. COATINGS Trends Concerning Surfaces the design element www.hesse-lignal.com PRE-TREATMENT Glass the design element This trend runs throughout the entire range of living spaces, including bedrooms, living

More information

Data Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description.

Data Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description. 0 Enamel 2388 2K-Aqua Seidenmattlack 2388 Englisch water-based, two-component, highly resistant to mechanical and chemical stress, AgBB certified, for interior and exterior use, with 2K-Aqua Hardener 2380

More information

UHS Duralit Extra Tinters series 150

UHS Duralit Extra Tinters series 150 2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum

More information

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear

July 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst

More information

Volume Solids %

Volume Solids % Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity

More information

SLIDING GATES BRUNDLE

SLIDING GATES BRUNDLE SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour

More information

Aerodur 3001 Base Coat Special Effects

Aerodur 3001 Base Coat Special Effects Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001

More information

3M Scotchkote System Application Guide. High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding

3M Scotchkote System Application Guide. High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding - Issue 1 Surface Preparation & Cleaning Application of Patch Primer to Corroded Areas Application of Primer to Patch Primed

More information

8-746 High Production Non-Sanding Primer Grey GS907

8-746 High Production Non-Sanding Primer Grey GS907 8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged

More information

CUPRON NEXT TECHNICAL DATA SHEET

CUPRON NEXT TECHNICAL DATA SHEET Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.

More information

PHU2K PHOTOLUMINESCENT PAINT SYSTEM

PHU2K PHOTOLUMINESCENT PAINT SYSTEM PHU2K PHOTOLUMINESCENT PAINT SYSTEM APPLICATION METHOD AND INFORMATION 1. DESCRIPTION 1.1 1.2 1.3 Main features Substrates: preparation and primers Pros and cons 2. PAINT APPLICATION 2.1 2.2 2.3 Substrate

More information

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification. Technical Data Sheet 14880 1 14880 acrylic VValidationDate). 1 Product description This is a one component solvent based acrylic thin film intumescent coating. Independently approved for fire protection

More information

Painting Pitched Roofs

Painting Pitched Roofs 4 Tutorial 4 Painting Pitched Roofs Tile & Galvanized Iron Paint Academy Determining your product requirement: Measure area to which paint is to be applied. Depending on surface to which the product is

More information

Marabu. Glass Ink GL. Field of Application. Characteristics

Marabu. Glass Ink GL. Field of Application. Characteristics Screen Printing Ink for glass, ceramics, metals, aluminium, chrome-plated parts, coated substrates, and thermosetting plastics Satin-gloss finish, semi-opaque, fast drying 2-component-ink-system, dishwasherproof

More information

Street Design. MALL seating. Mall bench product details. Mall technical specification. Mall accessories. Mall material finishes

Street Design. MALL seating. Mall bench product details. Mall technical specification. Mall accessories. Mall material finishes Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us MALL seating As UK based, designers and manufacturers, Street Design can manufacture

More information

A. Section includes surface preparation and the application of paint systems on the following exterior substrates: 1. Steel and iron.

A. Section includes surface preparation and the application of paint systems on the following exterior substrates: 1. Steel and iron. Farmington, Missouri Project Number M1801~01 PART 1 ~GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Automotive Refinish Terminology

Automotive Refinish Terminology Automotive Refinish Terminology Accelerator: A substance that when added to a paint will speed up the rate of cure. Acetone: A very fast evaporating solvent with high solvency for certain types of compounds

More information

COMPLETE SOLUTION TO SAFE HIGH QUALITY ROAD & LINE MARKINGS. Road & Line Marking. Paint Equipment Additives & Accessories

COMPLETE SOLUTION TO SAFE HIGH QUALITY ROAD & LINE MARKINGS. Road & Line Marking. Paint Equipment Additives & Accessories COMPLETE SOLUTION TO SAFE HIGH QUALITY ROAD & LINE MARKINGS Road & Line Marking Paint Equipment Additives & Accessories WELCOME Specialized Coating Systems is one of South Africa s leading paint manufacturing

More information

Identifying Common Interior Paint Defects/ Complaints

Identifying Common Interior Paint Defects/ Complaints Identifying Common Interior Paint Defects/ Complaints Use of low quality semi-gloss or gloss acrylic paints Use of flat paint in highly trafficked areas, where a higher sheen level would be desirable Use

More information

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material. Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (

More information

Please also carry out relevant test patches to ensure product compatibility and colour satisfaction.

Please also carry out relevant test patches to ensure product compatibility and colour satisfaction. INGILBY WATER BASED PAINTS GENERAL TIPS AND OBSERVATIONS In order to help projects run smoothly, if, at any stage during application, guidance is required please do not hesitate in contacting us for advice.

More information

nax Pro LV3601/03/05 VHS Primer Surfacer

nax Pro LV3601/03/05 VHS Primer Surfacer Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good

More information

Street Design. BUCKLAND seating. Buckland bench product details. Buckland technical specification. Buckland accessories. Buckland material finishes

Street Design. BUCKLAND seating. Buckland bench product details. Buckland technical specification. Buckland accessories. Buckland material finishes Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us BUCKLAND seating As UK based, designers and manufacturers, Street Design can manufacture

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 7120;15600 1,2 7120 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating.

More information