Autowave 3 Stage Application and Repair
|
|
- Irene Cummings
- 5 years ago
- Views:
Transcription
1 Description The term spot repair refers to all repairs in which the repaired area has color blended invisibly into the existing finish. As a result, the car refinisher is not compelled to spray large panels in the case of minor damage. The spot repair technique also enables minor differences in color and effect between the original car finish and the repair to be made invisible. Safety Considerations Use suitable personal protection. AkzoNobel recommends the use of a fresh air supply respirator. Refer to the product Safety Data Sheet (SDS) for more complete safety information. Autowave 3 Stage Metallic Foundation Layer o 100 parts Autowave foundation color o parts Activator WB Mid-Coat Color o 100 parts Autowave mid-coat color o parts Activator WB HVLP or Compliant Spray-Gun Set-Up: Autowave 3 Stage Pearl Foundation Layer o 100 parts Autowave foundation color o parts Activator WB Mid-Coat Color o 100 parts Autowave mid-coat color o parts Activator WB Application Air Pressure: mm Metallic Application Apply 2-3 coats of the foundation layer along with an orientation coat. Apply 2-3 coats of the mid-coat color. Flash Between Coats at 70 F (21 C) 3-5 minutes Consult spray gun manufacturers specifications. HVLP 10 psi at the air cap maximum. Pearl Application Apply 2-3 coats of the foundation layer Apply 3-4 layers of the mid-coat color Flash Before Clearcoat at 70 F (21 C) minutes Tack prior to clearcoat application. Re-Coatable With: Sikkens Clearcoats Read complete TDS for detailed product information. 1 / 11
2 Description The term spot repair refers to all repairs in which the repaired area has color blended invisibly into the existing finish. As a result, the car refinisher is not compelled to spray large panels in the case of minor damage. The spot repair technique also enables minor differences in color and effect between the original car finish and the repair to be made invisible. Suitable Substrates SUITABLE SURFACES All existing OEM finishes Sikkens preparatory products CANNOT BE APPLIED OVER Acid containing wash primers Sikkens Aerosol Spot Primers Sikkens Primer PO Airbag covers AutoPrep Pre-Treatment wipes Products and Additives Product Autowave MM (Mixing Machine) toners Hardeners WB Hardener Item # and Item # WB Hardener is suitable for use in Autowave. The addition of 5% is sufficient to improve system robustness including stone chip resistance, adhesion and system hardness. WB Hardener is also recommended when multi-layer systems are applied and the recommended layer thickness is exceeded. Activators Activator WB Item # Activator WB, the Autowave waterborne basecoat activator is used for all repair sizes. Application conditions of 70 F (21 C) or higher with a relative humidity range between 10% to 90%. Additives Autowave Additive LP Item # Used to extend the pot life of Autowave metallic colors Flex additive is not needed in Autowave. Basic Raw Materials Substrate Preparation Water based acrylic dispersion Dry sanding o Initial sanding steps may be executed with a coarser sanding grit; for example, #P360 - #P400. o Final sanding steps use #P500 - #P600. Note: Respect a maximum 100 sanding grit step difference or less throughout the taken sanding steps. Wet sanding o Initial sanding steps may be executed with a coarser sanding grit #P500 o Final sanding step #P600 to #P8000 Note: Respect a maximum 200 sanding grit step difference or less throughout the sanding steps. 2 / 11
3 Surface Cleaning National Rule Markets use AutoPrep UltraPrep followed by M600 Regulated Markets use AutoPrep UltraPrep only Product Agitation Autowave MM toners must be vigorously shaken several times prior to first use for ideal consistency and pour viscosity. Either shake by hand or agitate for 45 seconds on a shaker. Autowave MM colors must be stirred thoroughly before and after reduction. Mixing Colors Formulas A wide range formulas are available to match the most popular colors. These are available in MixitPro. Hand Mixing Colors Colors can be custom mixed. Solid colors can be made with solid MM toners and do not require additional MM666 binder. When using pure Autowave Metallic MM888 toner, mix 4 parts MM666 with 1 part MM888 toner. Autowave Reduction Points of Attention Add Activator WB to all Autowave colors prior to application using the following guidelines. Metallic Colors add parts Activator WB Peal Colors add parts Activator WB Solid Colors add parts Activator WB Do not exceed 50 parts of Activator WB Filtering: Use waterborne suitable 125 micron paint strainers Black Pre-Coat: When applying a black pre-coat for special effect colors, use deep black MM400 for the most vivid effects. Solvents: Avoid contact between waterborne products and any conventional solvents. 3 / 11
4 Viscosity When Mixed seconds Measured with a DIN #4 viscosity cup at 70 F (21 C). DIN #4 Pot-Life When Mixed Autowave Mixed Colors Autowave solid and pearl mixed colors Autowave metallic colors containing 888 or 338 toners Autowave 888 or 338 metallic colors containing toner MM F (21 C) 3 months 1 week 1 day Autowave Mixed Colors containing WB Hardener Autowave solid and pearl mixed colors Autowave pearl and solid colors containing 50% or more AW245 Autowave metallic colors 70 F (21 C) 1 ½ hours 1 hour 30 minutes Pot-Life Extension using Autowave LP Additive Spray Gun Set-Up To obtain an extended pot life for all Autowave metallic colors, Autowave LP Additive can be used. Step 1: Thoroughly stir the MM toners Step 2: Add 5 percent by weight Autowave LP Additive and stir Step 3: Add Activator WB and stir Do not use Autowave LP Additive in solid colors or colors containing Hardener WB or Underhood Additive. Consult spray gun manufactures instructions for specific spray gun pressure specifications. HVLP Gravity Compliant Gravity 4 / mm mm Application, Metallic 3 Stage Full Panel or Complete Foundation Layer Metallic Apply 2-3 coats or until covered. The first coat is a wet coat. Next apply intermediate coats about 80% as wet as the first coat. If needed, apply an orientation coat. Max 10 psi at cap Per manufacturer Allow a flash off time between coats of 3 to 5 minutes at 70 F (21 C). Flash time will be dependent on ambient temperature, applied paint wetness/thickness and available air-flow.
5 Flash Before Mid-Coat Allow first layer color to flash for minutes at 70 F (21 C) before application of the mid-coat color. Mid-Coat Color Apply 3-4 wet coats of mid-coat color. The application must be consistent and even to avoid a cloudy appearance. Altering the overlap areas between coats will help avoid darker areas between panels. Allow a flash off time between coats of 3 to 5 minutes at 70 F (21 C). Flash time will be dependent on ambient temperature, applied paint wetness/thickness and available air-flow. Flash Drying Before Clear-Coat Allow tri-coat color to flash for minutes at 70 F (21 C) before application of clear coat. Application, Pearl 3 Stage Full Panel or Complete Foundation Layer Apply 2-3 coats or until covered. The first coat is a wet coat. Next apply medium wet coats until covered. Allow a flash off time between coats of 3 to 5 minutes at 70 F (21 C). Flash time will be dependent on ambient temperature, applied paint wetness/thickness and available air-flow. Flash Before Mid-Coat Allow first layer color to flash for minutes at 70 F (21 C) before application of the mid-coat color. Mid-Coat Pearl Color Apply 3-4 medium-wet coats of mid-coat pearl color. The application must be consistent and even to avoid a cloudy appearance. Altering the overlap areas between coats will help avoid darker areas between panels. Allow a flash off time between coats of 3 to 5 minutes at 70 F (21 C). Flash time will be dependent on ambient temperature, applied paint wetness/thickness and available air-flow. Flash Drying Before Clear-Coat Allow tri-coat color to flash for minutes at 70 F (21 C) before application of clear coat. 5 / 11
6 3 Stage Repair Let-Down Panels Let down panels are used as an aid in estimating the number of second layer or mid-coat applications are needed to achieve a color match for three stage colors. When used as a tool for comparing the variety of applications to the repair vehicle the painter can determine the appropriate number of mid-coat applications to arrive at a suitable color match for the job. The color of the foundation coat and the thickness of the mid-coat determine the hue of three stage colors. Therefore the foundation color must be matched before assessing the mid-coat. Some vehicles may have an area on the vehicle that has not had the second layer color applied. This area can be used to confirm the accuracy of the first layer color. Typical placements of this un-coated area include; rocker panel sills, under hoods or inside trunks. When completed, your let down panel should also include an area that has not been painted with the second layer color. You can then use the let-down panel to assess both the first layer color and the mid-coat color & application prior to painting the vehicle. When clear coating the panel if only one half of the panel is cleared it will allow the painter to assess the match of the repair during repair application. Note: When spraying an actual repair stop one coat short of the estimated number of coats of the mid-coat. Using the un-cleared side of the letdown do an evaluation of your progress and determine how many more coats of the second layer may be needed. Let-Down Panel Application 1) Apply the foundation color to a spray-out panel and dry. 2) Mask off approximately 6 equal segments on the spray-out. 3) Apply mid-coat to the first un-masked area. It is important to apply the mid-coat exactly as you would if you were spraying a repair. Flash dry. 4) Remove masking from the next application area and apply mid-coat to the 1st application area and the 2nd. 5) Repeat until each area except one has been coated with mid-coat color. Flash for 20 minutes. 6) Mask off 1/2 of the panel across the panel vertically. 7) Clear coat the un-masked portion of the let-down panel. 6 / 11
7 Application, Metallic 3 Stage Repair Surface Prep Sand area A using #P dry or #P wet. Extend into area B 4-6. De-Gloss areas C and D with a D.A. using #P1000 dry and a 3M Interface pad or 3M Gray Scotch-Brite and PlastoBlend and water. Application Metallic Foundation Spray medium coats in areas A and B until covered. Extend each coat slightly making the final coat fade into the original finish. Application Metallic Blending Foundation Mixing Mix 100 parts of ready to spray metallic foundation color with 50 parts of ready to spray mid-coat color. Note: Transparency enhancer may be added if needed to make the foundation easier to blend. Application Metallic Blending Foundation Spray 1-2 single coats fading out into area C. Note: Layer 1 must blend invisibly into the original finish. When the 1st layer in a 3-Step color is applied varying amounts of the original effect show through the application. For this reason a corresponding amount of 2nd layer color most be applied to create a seamless repair. Therefore a staggered application is used. Application Mid Coat 1st coat, spray a wet coat in area A. 2nd coat, spray a wet coat to the end of the layer one blending foundation. 3rd coat, spray a wet coat between areas B/C. 4th coat, blend into area D. 7 / 11
8 Application, Pearl 3 Stage Repair Surface Prep Sand area A using #P dry or #P wet. Extend into area B 4-6. De-Gloss areas C and D with a D.A. using #P1000 dry and a 3M Interface pad or 3M Gray Scotch-Brite and PlastoBlend and water. Application Pearl Foundation Spray one wet coat over area A. Spray medium wet coats in areas A and B until covered. Extend each coat slightly making the final coat fade into the original finish. Application Pearl Blending Foundation Mixing Mix 100 parts of ready to spray foundation color with 50 parts of ready to spray pearl mid-coat color. Note: Transparency enhancer may be added if needed to make the foundation easier to blend. Application Blending Foundation Spray 1-2 single coats fading out into area C. Note: Foundation must blend invisibly into the original finish. When the 1st layer foundation in a 3-Step color is applied varying amounts of the original effect show through the application. For this reason a corresponding amount of pearl mid-coat color must be applied to create a seamless repair. Therefore a staggered application is used. The method below will also allow the painter to better judge where more pearl mid-coat is needed on the repair. Application Mid Coat 1st coat, spray a wet coat in area A. 2nd coat, spray a wet coat to the end of the layer one blending foundation. 3rd coat, spray a wet coat between areas B/C. 4th coat, blend into area D. 8 / 11
9 Film Thickness Using Suitable Application Drying / Curing Autowave solid, metallic and pearl colors: mils The total dry layer thickness of Autowave should not exceed 1.2 mils Drying times are stated a recommended application method, film thickness and object temperature. Recoat Time Humidity and airflow will influence the Autowave flash off and drying times. These times can be reduced to a minimum by using air accelerator systems with a distance of 3 feet from the object, thus increasing the airflow over the object. When heat is used for drying, allow object to cool down to application temperature before proceeding with color or clearcoat application Prior to clearcoat application: o Minimum 15 minutes at 75 F (24 C). Thorough drying after basecoat application is necessary o Maximum 24 hours at 75 F (24 C). Should this maximum time be exceeded, abrade the surface and apply another coat. Recoating Autoclear Superior Pack Fast and Slow Autoclear EnergySelect LV Fast and Slow Autoclear HS+ LV 2 Pack Fast and Slow Autoclear HS+ 2 Pack Fast and Slow Autoclear PC Standard and Production 9 / 11
10 Sanding / De-Nibbing Masking Cleaning of Equipment Theoretical Coverage Allow Autowave to dry sufficiently, at least 20 minutes at 75 F (24 C). Then lightly dry sand the damaged area with #P600 to #P1000 dry sanding paper. Thoroughly remove sanding dust residue before continuing Autowave application. Autowave colors can be taped (i.e. two toning) after 20 minutes flash-off at 75 F (24 C). o Increasing air movement especially with increased temperature improves the ability to apply masking on Autowave. o Let the object cool down to ambient temperature before masking. Clean and rinse the spray gun thoroughly after use with Autowave Gun Cleaner. Final rinse the spray gun with Activator WB prior to Autowave use. o Do not use any conventional thinner unless removing dried Autowave deposits. o Do not soak the spray gun for long periods either with Autowave Gun cleaner or Activator WB. Theoretical coverage is dependent of many factors. These may include; the shape of the object, surface smoothness, application technique and other application variables among others. 160 m2. / liter ready to spray VOC / Regulatory Information The VOC content of this product in ready to use form is <3.5 lb. /gallon. (<420 gr/lt) Product Storage Product shelf-life is determined when products are stored unopened at 70 F (21 C). Avoid too much temperature fluctuation. o For optimal performance, allow the ready to spray material to reach the application temperature before application o Maximum transport and storage temperatures between 36 F-95 F (2 C and 35 C). o Frozen Autowave toners causes gelling / lumps after which these toners can no longer be used. Please reference the Sikkens Shelf Life TDS for the shelf life limits for each Autowave component 10 / 11
11 AkzoNobel 1845 Maxwell Street Troy, MI USA Telephone: IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. Always read the Material Data Sheet and the for this product if available. All advice we give or any statement made about the product by us (whether in this data sheet or otherwise) is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product. All products supplied and technical advices given are subject to our standard terms and conditions of sale. You should request a copy of this document and review it carefully. The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development. It is the user's responsibility to verify that this data sheet is current prior to using the product. Coatings brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel. Head Office AkzoNobel B.V., PO Box BA Sassenheim, The Netherlands / 11
Application and Repair of Autobase Plus Red Tri-Stage Colors
Description Sikkens Autobase Plus Ready Mix (RM) Groundcoat and Midcoat are a unique color package that requires a specialized blend of pigments and toners designed to provide a color match for FA12:RR.
More informationAutobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015
Description Autobase Plus solvent borne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationPrimer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1
08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationPrimer / Primer Surfacer
Description is gray in color offering good filling and sanding properties, excellent holdout, fast dry, and good adhesion on properly prepaired substrates. can be used as either a high build primer / primer
More informationmm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application
Description Two-pack, VOC compliant, chromate-free epoxy primer-surfacer with good adhesion and corrosion resistance properties on all substrates within the Car Refinish market. For both new panels and
More informationGRIP-GARD BC Translucent For Professional Use Only
Description Grip-Gard BC uses a specially blended binder which converts Grip-Gard BC toners into a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted quickly
More informationApply a high gloss color coat: LV650 Topcoat or LV650 Basecoat per TDS. Flash a minimum of 20 minutes before LV650 LumiCoat High Gloss application
Description Autocoat BT LV650 Infuse LumiCoat is a high gloss, two-component polyurethane topcoat that offers the ability to add reflectance or brilliance to any Autocoat BT LV650 color. LumiCoat is part
More informationBC Translucent uses a specially
Grip-Gard BC Translucent Description Technical Data Sheet October 2013 Topcoat Grip-Garinto a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted BC Translucent
More informationE380 and E381 Epoxy Primer
Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380
More informationUse suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.
Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The
More informationTechnical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY
4 3505-002 1 3505-105 0.5 3505-204 Description: High solid two-pack epoxy primer-surfacer providing excellent appearance and corrosion protection. The target use for this product is refinishing and refurbish
More informationnax Pro LV3601/03/05 VHS Primer Surfacer
Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good
More informationnax Urethane Primer Surfacer Zitan
Description Quick-drying two-pack wet on wet primer surfacer and sanding primer filler with excellent application and sanding properties. Helps to reduce process time due to its wide application window
More information10P20-44MNF High Solids Epoxy Primer
Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for application to aircraft exterior surfaces.
More informationFOR PROFESSIONAL USE ONLY
100 3506-001 20 3599-104 40 3506-204 3505-205 23 Description: High performance, fast drying two-pack non-sanding filler or sanding filler. The target use for this product is refinishing and refurbish of
More informationTechnical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY
100 2505-001/005 50 2505-104 40 2505-204 2505-205 12 Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates..
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationAerodur 3001 Base Coat Special Effects
Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001
More informationnax K Premium Primer
Description Premium quality, high build multi grey shade fast drying, 2K sanding primer filler with excellent application and sanding properties. Due to its fast ambient drying, it helps to reduce process
More informationMay 2012 Product Information GRS Deltron D800
GLOBAL REFINISH SYSTEM May 2012 Product Information GRS Deltron Clear PRODUCTS Deltron Clear Deltron Medium Solids Hardeners D803, D841, D861 Deltron Accelerated Medium Solids Hardener D864 Deltron Standard
More information8-746 High Production Non-Sanding Primer Grey GS907
8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged
More informationProduct Information Deltron D894 High Solids Clear
GLOBAL REFINISH SYSTEM May 2012 Product Information Deltron High Solids Clear PRODUCTS Deltron HS Clear Deltron HS Hardeners D897, D8208 Deltron MS Hardener D803, D841, D861, D864 Deltron Thinners D808,
More informationGen2O - Environmentally Friendly
Waterborne Automotive Basecoat: Go for Gen2O and build a future for your business that makes cents. Gen2O is user friendly and cost effective. The transition from conventional to Gen2O is easy. Only minor
More informationUHS Duralit Extra Tinters series 150
2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum
More informationD895 EU-113. Colour Blender. Preparation of Substrate: Required Products. Product Description:
Product Description: GLOBAL REFINISH SYSTEM is a multipurpose product used with Global Refinish System BC colour. Mixed ready-to-spray with BC Colour, it is used as a blending clear along the colour blend
More information2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX
2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX PICTOGRAM DESCRIPTION Degrease Machine sand dry Hand sand wet Hand sand dry Scotch Brite Use Akzo Measuring Stick Ready to Spray Mixing Ratio: 2
More informationJuly 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear
GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst
More informationPermasolid HS Premium Surfacer 5310
Permasolid HS Premium Surfacer 5310 GENERAL DESCRIPTION A high quality, high solids 2K acrylic surfacer for passenger car refinishing that provides very high film build with good vertical stability, efficient
More informationSELECTION AND PREPARATION OF SUBSTRATES
592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates
More informationJuly 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear
GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst
More informationProduct Data Sheet March 2015
Product Data Sheet March 2015 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K HS Plus Express Clearcoat P190-6659 Product Product Description P190-6659 is a fast drying high solids 2-pack express clearcoat.
More informationCleaning Procedure INTRODUCTION:
Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Product Description A-Chromatic s ECP11 White, ECP15 Gray, and ECP17 Black are premium quality, low VOC primer surfacers specifically
More informationProduct Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description
Product Information 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue Product Description The 2K Chromatic Sealer NR (D80xx) is a premium quality
More informationMarch 2009 Product Information RAPID GREYMATIC 2K Filler
GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,
More informationTECHNICAL DATA SHEET 9008B0900D. Desothane HD 9008B0900D Buffable Clear Coat. Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description Desothane HD is a buffable clear coat intended to be used over Desothane HD 9008 Basecoat. can also be used as a buffable clear coat over pigmented polyurethane
More informationPermasolid HS Vario Surfacer 8590
Permasolid HS Vario Surfacer 8590 GENERAL DESCRIPTION A high quality acrylic surfacer from our 2K-Acryl-System for partial and full passenger car refinishes. Its versatility enables application at both
More informationP Waterborne Primer-Surfacer-Grey
PDS N4.15C January 2014 P950-5505 Waterborne Primer-Surfacer-Grey PRODUCT DESCRIPTION P950-5505 Waterborne Primer-Surfacer is a grey primer-surfacer based on the latest 1K waterborne technology for spot
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Description A-Chromatic Surfacers ECP11 White, ECP15 Gray, ECP17 Black are premium quality low VOC primer surfacers,
More informationPRODUCT GUIDE: COMPLIANT TOPCOATS. Version:
PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing
More informationWaterborne Tri-Coat Refinish Process
Waterborne Tri-Coat Refinish Process This Tri-Coat Refinishing Process is designed as a guide when performing a tri-coat refinish repair. It s important to familiarize yourself with the aspects of this
More informationTECHNICAL DATA SHEET 515X349. DeSoto 515X349 Exterior Primer. Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description DeSoto exterior primer is a conventional solids urethane compatible epoxy coating. This primer was formulated to protect aluminum and composite substrates from
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationFull Product Name. Products. Properties. 2K Etch Primer. Type of Product Description
Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion
More informationDuPont Plas-Stick 2332S Low VOC Adhesion Promoter
Description Plas-Stick 2332S is a Low VOC gray pigmented adhesion promoter for polyolefin or non-polyolefin unprimed automotive plastics. When combined with proper surface preparation, this product enhances
More informationDesobond CA102 Adhesive Bonding Primer
TECHNICAL DATA SHEET Product Description Components Desobond is a low density adhesion promoter. It was developed to improve bonding characteristics to aged primers, topcoats, acrylics, aluminum, and other
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationMarch 2013 Product Information GRS Deltron BC
GLOBAL REFINISH SYSTEM March 2013 Product Information GRS Deltron BC Basecoat colour PRODUCTS Deltron Basecoat Tinters Deltron Xirallic Special Effect Tinters Deltron Thinners Deltron BC Fade-out Thinner
More informationJanuary 2007 Product Information DELTRON D821
GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.
More informationMagnetpaint & Sketchpaint
Magnetpaint & Sketchpaint Turn any smooth surface into a magnetically receptive whiteboard MagnetPaint is an exciting product that allows you to paint your own magnetic surface on any flat area. SketchPaint
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More informationAquaCLAD Water-Reducible Rust Preventative Alkyd
AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High
More informationBulldog Adhesion Promoter System
PABC124 Abrasive Cleaner GTPO123, QTPO123 Adhesion Promoter (liquid) ETPO123B Adhesion Promoter (aerosol) Bulldog Adhesion Promoter is the premier adhesion promoter for the auto body collision repair market.
More informationProduct Information PRIMA D839 2 Component Primer
GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationVolume Solids %
Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity
More informationPercoTop PUR 2K MS Topcoat
Features is a 2K topcoat based on acrylic and polyester resins. It has an excellent mechanical and chemical resistance. The topcoat is easy to apply. 5 gloss levels: high gloss to matt. Products Base Paint
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Automotive Top Coat 275. Permasolid HS Automotive Top Coat 275 is a High-Solid top coat system for solid colours. It is used for passenger car finishes. The comprehensive
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Express Surfacer 5250. Permasolid HS Express Surfacer 5250 is a high-grade, productive, VOCcompliant 2K HS sanding surfacer based on acrylic resins. Very good application
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More informationDuPont Plas-Stick 2330S and A-2330S Plastics Adhesion Promoter
Description Plas-Stick 2330S is a green-gray pigmented adhesion promoter for polyolefin or non-polyolefin unprimed automotive plastics. When combined with proper surface preparation, this product enhances
More informationWaterborne Tri-Coat Refinish Process
Waterborne Tri-Coat Refinish Process This Tri-Coat Refinishing Process is designed as a guide when performing a tri-coat refinish repair. It s important to familiarize yourself with the aspects of this
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More informationCV116 Polyurethane Coat Gloss
Polyurethane Coat Gloss TECHNICAL DATA SHEET Product Description Components is a two pack, ambient curing clear polyurethane gloss coating, designed for internal / external use to protect identification
More informationDuPont ChromaSurfacer 7704S 2K Urethane Primer- Filler
c Description DuPont ChromaSurfacer 7704S is a high build 2K Urethane Primer- with a simple 4:1 mix ratio. The primer has excellent hold out and shares activator with DuPont ChromaSeal 7710S /7740S /7770S,
More informationPercoTop 449 2K Structure Topcoat
Features is a polyurethane based 2K structure topcoat with a high mechanical resistance. It has an excellent resistance to solvents and other chemicals. Different structures can be produced (cf. PercoTop
More informationHow to use a Touch Up Bottle & Brush
How to use a Touch Up Bottle & Brush Tech Tips General Definitions Base Color (Basecoat): A color coat requiring a clear coat. Base Color provides color and appearance, while the clear coat provides gloss
More informationNOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).
Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as
More informationProduct Data Sheet May 2006
Product Name/Product Code H4530 Product Data Sheet May 2006 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K Single Layer Solid Colour System Medium Solids Product Description P420-2K Solid Colour Mixes
More informationHP Chromate Free Epoxy Primer P /-4505/-4510
Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect
More informationPhysical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.
Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (
More informationN39/1794 Clear Acrylic Lacquer TECHNICAL DATA SHEET N39/1794. Product Description. Components. Specifications. Surface Preparation and Pretreatment
Clear Acrylic Lacquer TECHNICAL DATA SHEET Product Description is a single pack, acrylic lacquer designed to protect identification markings, labels and emblems on aircraft. Fast drying Excellent flexibility
More informationProduct Data Sheet November 2016
Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V PRIME Acrylic Urethane Surfacer P 238 DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable
More informationPaint and Decals. Adequate ventilation is required when working in a confined area with paint and paint-related chemicals.
Service Guide Paint Repair Paint and Decals Utilimaster recommends that a professional body shop do all paint repairs. The service technician should read this entire procedure before working on the vehicle.
More informationK 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)
K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer
More informationProduct Data Sheet Awlwood MA Primers OJ3809 / OJ9809 / OJ7809 Specification Data
Specification Data Packaging: Product Code: Cleaning: Available in 1 quart packs OJ3809 Clear; OJ9809 Yellow; OJ7809 Red OT0200 Awlwood MA Brush Cleaner Volume Solids: 45% Specific Gravity: OJ3809-1.013
More informationProduct Information DP5000
GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range
More informationF565 Intermediate Coatings (EMEA)
TECHNICAL DATA SHEET Product Description Components is a two pack, pigmented, polyamide based coating formulated for use as intermediate coats in selectively strippable finish paint systems. High resistance
More informationAPPLICATION NOTE - SR001. Cold Weather Application
APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V-PRIME DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V-PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable for the wide range of day-to-day
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationDPLV Low VOC Epoxy Primer P-245
Low VOC Epoxy Primer P-245 Low VOC Epoxy Primer provides excellent adhesion and corrosion resistance to many types of properly prepared steel, aluminum, and fiberglass substrates. Epoxy Primer may also
More informationProduct Data Sheet July 2014
Page 1 of 5 Product Data Sheet July 2014 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K HS Clearcoat P190-6850 Product Description P190-6850 2K HS Clearcoat P210-842 2K HS Hardener Fast P210-8430 2K
More information5543/9000 Flame Retardant UV Resistant Varnish High Gloss
Flame Retardant UV Resistant Varnish High Gloss TECHNICAL DATA SHEET Product Description is a two component, transparent, glossy acrylic urethane varnish. Designed to provide UV protection to external
More informationSEA45 Water Borne Acrylic Gloss
Water Borne Acrylic Gloss TECHNICAL DATA SHEET Product Description Components is a single pack, general purpose gloss finish. Applicable by brush or spray. Fast drying Water based, low VOC Excellent weather
More information20th ANNUAL SKILLS MANITOBA COMPETITION PAINT COMPETITON COMPETITION DESCRIPTION
20th ANNUAL SKILLS MANITOBA COMPETITION PAINT COMPETITON COMPETITION DESCRIPTION Break down of Students into 2 groups of 8 competitors maximum 4 Secondary and 4 Post- Secondary (2 ½ hour time blocks morning
More informationHP Epoxy Primer P
Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy
More informationAPPLICATION NOTE - SR001. Cold Weather Application
APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in
More informationSprayMax 2K Headlight Clearcoat 250 ml Prod.-no.:
Peter Kwasny GmbH, Heilbronner Strasse 96, 74831 Gundelsheim / Germany Telephone: +49 (0) 06269-95-0; Fax: +49 (0) 6269-95-80 internet: www.kwasny.de e-mail info@kwasny.de EU-GB SprayMax 2K Headlight Clearcoat
More informationProcess Data Sheet January 2015
Process Data Sheet January 2015 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY J1005V TCB100 - Aquabase Plus Clean Vivid Ruby Special Concentrate P190-1005 EMEA Product Description P190-1005 Clean Vivid
More informationBRUSH APPLICATION INSTRUCTIONS
QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage
More informationTechnical Data Sheet.
Technical Data Sheet. Permahyd Hi-TEC Base Coat 480 Blending system for two-stage colours To achieve a perfect colour transition in the blending area or from repair to adjacent areas, e.g. wing / door.
More informationAUTOMOTIVE REFINISHING TECHNOLOGY CONTEST DESCRIPTION
AUTOMOTIVE REFINISHING TECHNOLOGY CONTEST DESCRIPTION PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field
More informationProduct Data Sheet August 2006 (Updated in December 2014)
Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Diamond Clear Coat 8450. Permasolid HS Diamond Clear Coat 8450 is a VOC-compliant High Solid clear coat. It is used to repair vehicles which in production line are coated
More information