JONES-BLAIR tm MANUFACTURERS OF QUALITY PAINT SINCE 1928 TYPE OF COATING. Product: Acrylithane HS2 Acrylic Urethane, Primers, Reducers
|
|
- Ruby Atkinson
- 6 years ago
- Views:
Transcription
1 JONES-BLAIR tm MANUFACTURERS OF QUALITY PAINT SINCE 1928 TYPE OF COATING Product: Acrylithane HS2 Acrylic Urethane, Primers, Reducers FIELD APPLICATION GUIDE & POWERWASHING SPECIFICATIONS FOR APPLYING PAINT PRODUCTS ON SERVICE STATIONS FROM JONES-BLAIR COMPANY 2728 Empire Central Dallas, Texas (214) Nat l Watts: 1 (800) Customer Service/Sales Fax Line: 1 (800) Address: sales@jones-blair.com National Order Placement CUSTOMER SERVICE Elida Rodriguez Technical Information Kristal Bluemer, National Sales Manager, Imaging Division--- kbluemer@jones-blair.com Cell: The information data and suggestions contained herein are believed to be reliable based upon our knowledge and experience, however, it is expressly declared that Seller does not guarantee the result to be obtained in Buyers processes. SELLER HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY OTHER WARRANTY EXPRESSED OR IMPLIED as to any and all products and or suggestions described herein whether such products are used along or in combination with other materials. Buyer must make its own determination of the suitability of any product for its use and the completeness of any information contained herein. Nothing contained herein shall be construed to constitute inducement or recommendation to practice any invention covered by any patent without authority from the owner of the patent.
2 TECHNICAL INFORMATION FOR USING JONES-BLAIR TM ACRYLITHANE HS2 ON SERVICE STATION EXTERIORS & SERVICE BAY OPTIONS Special Information: Interior Sales Area and Service Bay Finish Coat Options Acrylithane HS2 should be used wherever possible because of its superior serviceability and appearance. However, due to its strong solvent odor, it may be desirable to substitute the Acrylithane HS2 in the sales area or service bays with Rust Not HP Acrylic Latex Enamel. This is a single component, air dry latex which also offers very low odor and a hard gloss finish. Mixing, Thinning, and Application Technique Jones-Blair Acrylithane HS2 (high solids) is a two component system and must be mixed. A 3:1 mixing ratio is required. Mix one 3/4 gallon of Acrylithane base material with one (1) quart of #99951 Acrylithane Catalyst. Up to one (1) quart of #21092 thinner may be added per gallon of mixed paint. Thinning is recommended for spray application. For brush and roller application, thinning is not normally required. Apply Acrylithane only to thoroughly dry surfaces. When applying at temperatures exceeding 85 o F, addition of as much as three fluid ounces (about one-fifth pint) of #21093 drying retardant per gallon of Acrylithane is recommended. Use of drying retardant prevents dry spray and undesired fast drying on the surface being covered as well as on brushes and rollers. For application in temperatures between o F, it is recommended that 1/4-1/2 ounce (2-3 capfuls) of #99011 Accelerator be added per catalyzed gallon of Acrylithane HS2 or #33010 Ureprime Primer. Note: Acrylithane HS2 may be applied over any urethane of factory baked finishes, including florapolymers, when dulled by sanding and priming with Ureprime HS2 Epoxy Urethane Primer #33010 White - Mix 3:1 ratio with catalyst same as Acrylithane HS2 topcoat. Note: Apply two coats of recommended white primer over dark colors for good hide when using yellow or red to topcoat. Two finish coats required. New Metal Surfaces (Iron and Steel) Surface must be clean and free from oil, grease, wax, and other foreign matter. Remove mill scale and rust by sandblasting. If sandblasting is not practical, clean surfaces with power tools or by hand scraping and wire-brushing. Prime with Jones-Blair # White Multi Purpose HS Primer or # Gray. For maximum corrosion resistance in coastal areas, prime with Jones-Blair #33010 White Ureprime Epoxy Urethane. One prime coat and two finish coats required. Previously Painted Metal Surfaces (Iron and Steel) Surface must be clean and free from oil, grease, wax, and other foreign matter. Remove any rust and loose paint by scraping and wire-brushing. Apply primer to any areas cleaned to bare metal the same as described for new metal surfaces. Most aged alkyd and urethane enamels will accept a new Acrylithane topcoat without lifting. To reduce the potential for lifting an existing coating, a barrier coat of # White Multi-Purpose HS Primer or # Gray may be applied before application of an Acrylithane finish coat. Apply two Acrylithane finish coats for desired appearance.
3 Factory Finished Panels INCLUDING ACM Surfaces must be clean and free from oil, grease, wax or other foreign matter. If previously painted, remove loose or scaling paint by waterblasting, scraping or wirebrushing. Clean any chalky surfaces thoroughly with detergent and water then rinsing with clean water. Let all surfaces dry completely before painting. Apply two coats of Jones-Blair Acrylithane HS2 finish for desired appearance. Aluminum and Galvanized Surfaces Surface must be clean and free from oil, grease, wax and other foreign matter. Prime with Jones-Blair #942 Mist Coat II Zinc Chromate Primer or #3090 Multi Grip 2 Acrylic White Metal Primer. Apply two Acrylithane finish coats for desired appearance. New Masonry Surfaces (Block, Concrete, Rough-Textured Brick, Etc. Surface must be clean and free from oil, grease, wax, and other foreign matter. Fill all porous surfaces with Jones-Blair #3781 Latex Block Filler. Block filler is ready-mixed and may be applied by brush, roller, or spray. For best results, spray and roller application should be followed by brushing while the filler is still wet. Brushing will work the filler into pores and crevices to more effectively prevent moisture penetration. A gallon of block filler will typically cover square feet depending on the surface. Use water for cleanup and thinning. For roller application, a 1/2 inch roller cover is recommended with block filler. Allow block filler to dry 24 to 48 hours before applying finish coats. *NOTE: Acrylithane HS2 may be applied over any urethane coating without a barrier prime coat when dulled by sanding. Factory Applied Florapolymer Coatings (ACM) Acrylithane HS2 may be applied over any urethane or factory baked finishes including florapolymer coatings when dulled by sanding and applying Ureprime HS2 Epoxy Urethane Primer #33010 White. This is a two component product same as Acrylithane Topcoat. Previously Painted Masonry Surfaces Surface must be clean and free from oil, grease, wax and other foreign matter. Remove loose and scaling paint by water blasting, scraping or wirebrushing. If fillers are removed by cleaning the surface, fill again as required with Jones-Blair #3781 Latex Block Filler. Make any necessary repairs with a concrete patching compound. Clean any chalky surfaces thoroughly with detergent and water before application of topcoat. Let any wet surfaces dry thoroughly before applying barrier or finish coats. A barrier coat of Jones-Blair # White Multi-Purpose HS Primer or # Gray may be applied over alkyd coatings to reduce potential for lifting by Acrylithane topcoat. Most aged alkyd, latex and urethane enamels will accept a new Acrylithane topcoat without lifting.
4 New Stucco Surfaces Surface must be clean and free from oil, grease, wax, and other foreign matter including loose stucco. New stucco should be allowed to cure 1-2 weeks in good drying condition before applying prime coat. Prime with #3090 Multi-Grip 2 Latex Primer and two finish coats for desired appearance. Previously Painted Stucco Surfaces Surface must be clean and free from oil, grease, wax, and other foreign matter. Remove and repair any loose or damaged stucco. Clean any chalky surfaces thoroughly with detergent and water before application of topcoat. Let any wet surfaces dry thoroughly before applying barrier or finish coats. A barrier coat of Jones-Blair # White Multi-Purpose Primer or # Gray may be applied over alkyd coating to reduce potential for lifting by Acrylithane topcoat. Most aged alkyd, latex and urethane enamels will accept a new Acrylithane topcoat without lifting. Apply two finish coats of Acrylithane HS2. Unpainted Glazed Brick and Porcelain Surface must be clean and free from oil, grease, wax, and other foreign matter. Apply prime coat of Jones-Blair #33010 White Ureprime HS2 primer. * Previously Painted Glazed Brick and Porcelain Surface must be clean and free from oil, grease, wax and other foreign matter. Remove loose and scaling paint by water blasting, scraping, or wirebrushing. Apply prime coat of Jones-Blair #33010 White Ureprime Primer to any areas where previous coatings are removed by cleaning and surface preparation. Additionally, to reduce the potential for lifting an existing coating, a barrier coat of the # White Multi-Purpose HS Primer or # Gray may be applied before application of any Acrylithane finish coat. Most aged alkyd, latex and urethane enamels will accept a new Acrylithane topcoat without lifting. Dull glossy surfaces by sanding. Apply one prime coat and two finish coats for desired appearance. Unpainted Common Brick, Stone-X and other Unpainted Cementous Surfaces Surface must be clean and free from oil, grease, wax, and other foreign matter. Prime with Jones-Blair #3090 Multi-Grip 2 Latex where bridging of small cracks is desired. Jones-Blair #3781 Block Filler may also be used for this purpose when thinned with water. Apply two Acrylithane finish coats for desired appearance. New Wood Surface must be clean and free from oil, grease, wax, and other foreign matter. Fill cracks with spackling paste. Ensure that surface is thoroughly dry before painting. No separate primer is required. Acrylithane is self-priming.
5 * Previously Painted Wood Surface must be clean and free from oil, grease, wax and other foreign matter. Remove loose and scaling paint by scraping or wirebrushing. Remove any mildew (wearing protective clothing, gloves and safety goggles) by washing with a solution of household bleach, water and household detergent (3 quarts water plus 1 quart bleach plus 1 cup detergent). Do not add ammonia to the mixture. Rinse the washed surface thoroughly with clean water. Repair cracks with spackling paste. Ensure that surface is thoroughly dry before painting. Most aged alkyd, latex and urethane enamel will accept a new Acrylithane topcoat without lifting. To reduce the potential for lifting an existing coating, a barrier coat of Jones-Blair # Multi-Purpose HS Primer or # Gray may be applied before application of an Acrylithane finish coat. Apply two Acrylithane finish coats for desired appearance. Recommended Application Equipment Associated Sundry Products for Proper Application: To help ensure ease of application and uniformity of finish, the following products are recommended. For your convenience, these can be ordered and shipped through customer service at the same time you order Acrylithane HS2. No thinning normally required. If applying on air or surface temperatures above 80 o F, up to three ounces of JB #21093 Retarder may be used to slow drying. Clean tools with JB TM #21092 Reducer. Spray, Air Atomized Model Gun Air Cap Fluid Atomizing Spray, Air Atomized Tip Pressure DeVilbiss MBC 510 # 704 FX PSI Binks #18 63PB PSI Reduction: Up to 25% with JB #21092 Reducer to mixed gallon. Up to three ounces of JB # Retarder may be added to prevent fast dry or cobbwebbing in temperatures above 85 o F. Clean-up: Clean equipment IMMEDIATELY after using. Use JB #21092 Reducer for cleaning. Airless Spray: Pump Ratio Fluid Tip Fluid Pressure 30:1-35: PSI Reduction and Clean-up: Same as for Air Spray. JB Item # Description Rollers/Covers! Handles for rough surfaces (brick, block, etc.): / Roller Cover / Roller Cover For smooth surfaces: /4 Candy stripe roller cover size Elastic Vinyl Car Cover
6 JONES-BLAIR TM Technical Data Sheet MANUFACTURERS OF QUALITY PAINT SINCE 1928 Protective Coatings DEW POINT OF MOIST AIR It is generally not recommended to apply Jones-Blair Acrylithane HS2 Aliphatic Polyurethane Enamel or any Polyurethane Enamel any time the substrate (surface) temperature is within 5 F of the dew point. This chart illustrates how to calculate the dew point: DEW POINT OF MOIST AIR Ambient Air Temperature 2 F -7 F 3 F -1 C 4 F 4 C 5 F 1 C 6 F 1 C 7 F 21 C 8 F 27 C 9 F 32 C 1 F 38 C 11 F 43 C 12 F 4 C R 9 18 F -8 C 28 F -2 C 37 F 3 C 47 F 8 C 57 F 14 C 67 F 19 C 77 F 25 C 87 F 31 C 97 F 36 C 1 7 F 42 C 1 17 F 47 C E F -8 C 26 F -3 o C 36 F 2 C 45 F 7 C 55 F 13 C 65 F 18 C 75 F 24 C 84 F 29 C 95 F 35 C 1 4 F 4 C 113 F 45 C L 8 16 F -9 C 25 F -4 C 34 F 1 C 44 F 7 C 54 F 12 C 63 F 17 C 73 F 23 C 82 F 28 C 93 F 34 C 1 2 F 39 C 11 F 43 C A F -9 C 24 F -4 C 33 F 1 C 42 F 6 C 52 F 11 C 62 F 17 C 71 F 22 C 8 F 27 C 91 F 33 C 1 F 38 C 1 6 F 42 C T 7 13 F -11 C 22 F -8 C 31 F -1 C 4 F 4 C 5 F 1 C 6 F 16 C 68 F 2 C 78 F 26 C 88 F 31 C 96 F 36 C 1 5 F 41 C V F -11 C 2 F -7 C 29 F -2 C 36 F 3 C 47 F 8 C 57 F 14 C 66 F 19 C 76 F 24 C 85 F 29 C 93 F 34 C 1 3 F 39 C E 6 11 F -12 C 19 F -7 C 27 F -3 C 36 F 2 C 45 F 7 C 55 F 13 C 64 F 18 C 73 F 23 C 83 F 26 C 92 F 33 C 1 1 F 38 C H 55 9 F -13 C 17 F -8 C 25 F -4 C 34 F 1 C 43 F 6 C 53 F 12 C 61 F 16 C 7 F 21 C 8 F 27 C 89 F 32 C 96 F 37 C U 5 6 F -14 C 15 F -9 C 23 F -5 C 31 F -1 C 4 F 4 C 5 F 1 C 59 F 15 C 67 F 19 C 77 F 25 C 86 F 3 C 94 F 34 C M 45 4 F -16 C 13 F -11 C 21 F -6 C 29 F -2 C 37 F 3 C 47 F 8 C 58 F 13 C 64 F 18 C 73 F 23 C 82 F 28 C 91 F 33 C I 4 1 F -17 C 11 F -12 C 18 F -8 C 26 F -3 C 35 F 2 C 43 F 6 C 52 F 11 C 61 F 16 C 69 F 21 C 78 F 28 C 87 F 31 C D 35-2 F -19 C 8 F -13 C 16 F -9 C 23 F -5 C 31 F -1 C 4 F 4 C 48 F 9 C 57 F 14 C 65 F 18 C 74 F 23 C 83 F 28 C I 3-6 F -2 C 4 F -16 C 13 F -11 C 2 F -7 C 28 F -2 C 36 F 2 C 44 F 7 C 52 F 11 C 61 F 16 C 69 F 21 C 77 F 25 C Example: If air temperature is 7 F and relative humidity is 65 F, the dew point is 57 F The information data and suggestions contained herein are believed to be reliable based upon our knowledge and experience, however, it is expressly declared that Seller does not guarantee the result to be obtained in Buyer s processes. SELLER HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY OTHER WARRANTY EXPRESSED OR IMPLIED as to any and all products and/or suggestions described herein whether such products are used along or in combination with other materials. Buyer must make its own determination of the suitability of any product for its use and the completeness of any information contained herein. Nothing contained herein shall be construed to constitute inducement or recommendation to practice any invention covered by any patent without authority from the Owner of the patent. Jones-Blair Company TM Dallas, TX 75235
7 Power washing is required for all decks if repainting is required. Buildings and other structures should also be power washed if they are to be painted. Equipment Power washing pumps should be capable of generating 3,000 to 4,000 psi and deliver 6-10 gpm of wash/rinse water. Fan type spray tips give varying spray angles. Fan tips are considered to be "scrapers" and/or "pushers". The spray tips used should be selected for this program should be based on the area and surface to be cleaned. Do not use a round tip or what is commonly referred to as a "shotgun", point tip or "0" tip. Round tips used with high pressure may result in surface damage on wood, metal or masonry. This type of spray tip is considered to be a "cutter". High flow rate/low pressure machines will generally clean better than a low flow rate/high pressure machine. Consult SSPC-SP12/NACE No. 5 "Surface Preparation and Cleaning of Steel and Other Hard Materials by High and Ultrahigh Pressure Water Jetting Prior to Recoating" for additional information. Cleaning Agents There is a number of cleaning agents or detergents that can be used in conjunction with pressure washers. Cleaning agents can dramatically improve cleaning efforts. Consult the manufacturer's recommendations based on the type of surfaces to be cleaned. Also consider health, safety and environmental issues when selecting the appropriate cleaner. Do not use any solutions that are caustic soda (causes pitting of aluminum), chlorine (discolors all metals), strong alkaline (will damage painted surfaces) or acid type cleaners that will deteriorate galvanized metal or etch glass. The best cleaning agent for common soil types to remove grease, oil and dirt is a medium duty alkaline (ph of 8 to 12) at about 3% concentration by volume for painted metal, wood, and galvanized aluminum. Regardless of the cleaning agents used, the surfaces cleaned must be thoroughly rinsed with clear water to insure that the cleaning solution has been removed. Failure to thoroughly remove the cleaning agent could result in poor paint adhesion when the surfaces are painted. All power washed surfaces must be dry before painting. Preparation and Power Washing Cover all surfaces that might be damaged by power washing such as dispensers, automobiles, light fixtures, cameras, foliage, etc. All surfaces should be scrubbed to remove contaminants. Heavily stained areas may need pre-treatment. A minimum of two passes is required: one with cleaning solution and the final rinse. All standing water should be removed from the site to ensure that there are no remaining chemicals and to avoid spotting. Reclamation Contractor is expected to comply with all regulations regarding the disposal of wash and rinse water. Local or state regulations may not permit these waters into the site storm drains, or, to be allowed to run off site. For those areas that do have special reclamation requirements, contact the Project Manager.
Product: Acrylithane HS2 Acrylic Urethane (not for use in California) JONES-BLAIR PAINT FIELD APPLICATION GUIDE
Product: Acrylithane HS2 Acrylic Urethane (not for use in California) JONES-BLAIR PAINT FIELD APPLICATION GUIDE Sheetz Service Station Fueling Areas, Canopy Deck, and Power Washing Instructions Revised
More informationPRODUCT GUIDE: CATALYZED TOPCOATS. Version:
PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane
More informationPRODUCT GUIDE: CATALYZED PRIMERS. Version:
PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and
More informationAquaCLAD Water-Reducible Rust Preventative Alkyd
AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationTECHNICAL DATA SHEET IVY COATINGS:
direct to metal Interior/Exterior DESCRIPTION Ivy Direct To Metal Paint is a low-voc interior/exterior; waterborne; rust-inhibiting metal paint that does not compromise indoor air quality. Ivy Direct To
More information1. Labels: Do not paint over UL, FMG, or other code-required labels or equipment name, identification, performance rating, or nomenclature plates.
SECTION 09 9100 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION PAINTS AND COATINGS
SECTION 09 90 00 PAINTS AND COATINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Surface preparation. B. Field application of paints and other coatings. 1.2 RELATED SECTIONS A. Division 05 - Metal Fabrications.
More informationPRODUCT GUIDE: WATERBORNE TOPCOATS. Version:
PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible
More informationPRODUCT GUIDE: COMPLIANT TOPCOATS. Version:
PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing
More informationWHAT S ON THE MARKET?
Smart Shopping for Home Furnishings Selecting Paint Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 13 Shopping for paint? When shopping for paint, you will find many different kinds. Some
More informationNoFire A-18 NV Fire Protective Coating - General Application Procedure & Technical Data
21 Industrial Ave Upper Saddle River New Jersey 07458 Tel: 201-818-1616 Fax: 201-818-8775 E-mail: nofire@nofire.net Web Site: http://www.nofiretechnologies.com NoFire A-18 NV Fire Protective Coating -
More informationGeneral description: Two-component high-build, high solids surface tolerant universal epoxy coating. For painting on steel and galvanized steel substrates. Certified for systems category C5I High ISO 12944.
More informationBid No :01 Exterior Roynon Elementary & La Verne Heights (Alternate #1) SCOPE OF WORK
Part I. General 1.01 General Conditions SCOPE OF WORK A. The contractor shall provide all paint, labor, tools and supplies to perform a complete repaint of all exterior/interior surfaces of the building,
More informationProduct Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description
Product Information 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue Product Description The 2K Chromatic Sealer NR (D80xx) is a premium quality
More informationPRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
More informationExterior Paint for wood Tables and Benches
Page 1 of 5 DESIGN STANDARDS FOR: EXTERIOR PAINTING Exterior Paint for wood Tables and Benches 1. Wood tables and benches, including trash receptacle slats, shall be painted with one coat of primer and
More information380 Swimming Pool Paint
Issued 21 st April 2010 PRODUCT DATA SHEET UNPAINTED CEMENT 380 Swimming Pool Paint SURFACE PREPARATION New cement or render should be allowed to cure for at least 21-28 days before any preparation is
More informationThese Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881.
For product description refer to product data sheet HEMPADUR MASTIC 45880/ HEMPADUR MASTIC 45880/ High temperatures: 45881: BASE 45889 with CURING AGENT 95881 Low to medium temperatures: 45880: BASE 45889
More informationPrimer-Sealers Solutions
Guide to Primer-Sealers Solutions for interior and exterior use Create a ready-to-paint surface, while sealing in odors and stains, and ensure the durability, appearance and success of your job. Why Prime-Seal
More informationSpecification Guide. Portable & Modular Buildings
Specification Guide Portable & Modular Buildings Table of Contents Page Introduction Identifying painting requirements 3 How do I use this specification guide 3 Contacting my local Axalta Coating Systems
More informationPAINTING PAINTING
09920 - PAINTING 09920-1 PART ONE: GENERAL PAINTING 1.1 Description 1.1.1 Work of this Section, as shown or specified, shall be provided by the Interior Contractor and shall be in accordance with the requirements
More informationA: Proposed Scope of Services. B: Site Location Map. C: Selected existing conditions photographs.
The Wise Economy Workshop 3570 Sherbrooke Drive Cincinnati, OH 45241 USA 1.513.288-6613 12 North South Street Attachments: A: Proposed Scope of Services. B: Site Location Map. C: Selected existing conditions
More informationPrimer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1
08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,
More informationMAINTENANCE GUIDE: Exterior
Ferrous Metal Benches Building & Address Numbers Entry Doors & Frames Entry Kiosks Fire Hydrants Handrails Light Fixtures Mailboxes Monument Signs Perimeter Walls Stairwell Supports & Frames Window & Door
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationThe Process. Features & Benefits PAINT REMOVAL SYSTEM APPLY COVER REMOVE WAIT WASH
PAINT REMOVAL SYSTEM A REVOLUTIONARY, UNIQUE AND ENVIRONMENTALLY FRIENDLY PAINT REMOVAL/ STRIPPING SYSTEM Peel Away 1 Ideal for use on bricks, concrete, cast iron and pressed metal. Removes Oil, Enamel,
More informationHow to use a Touch Up Bottle & Brush
How to use a Touch Up Bottle & Brush Tech Tips General Definitions Base Color (Basecoat): A color coat requiring a clear coat. Base Color provides color and appearance, while the clear coat provides gloss
More informationExterior. How to paint
How to paint Exterior Choosing the right paint, gloss and primer Estimating the correct amount of paint Using the right tools and supplies Prepping and painting Cleaning up and caring for your walls How
More informationSTAR PAINT. Put some colour in your life COMMON PAINT PROBLEMS AND POSSIBLE SOLUTIONS TEL: FAX:
COMMON PAINT PROBLEMS AND POSSIBLE SOLUTIONS STAR PAINT TEL: +268 518 6200 FAX: +268 518 6201 I info@starpaint.co.sz Put some colour in your life Property of Star Paint (PTY) Ltd Page 1 Common Paint Problems
More informationSECTION PAINTING
SECTION 09900 PAINTING PART 1 - GENERAL 1.1 SECTION INCLUDES A. This Section includes surface preparation, painting, and finishing of new and existing wood, interior and exterior surfaces including the
More informationSECTION 025 INDUSTRIAL PAINTING
SECTION 025 INDUSTRIL PINTING Industrial painting, including all necessary preparation and application, except as modified in this Section, shall conform to the recommendations of the manufacturer of the
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationA. Section includes surface preparation and the application of paint systems on exterior substrates.
SECTION 09 91 13 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationK 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)
K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer
More information380 Swimming Pool Paint
Issued 21 st June 2011 PRODUCT DATA SHEET 380 Swimming Pool Paint SURFACE PREPARATION If your pool has been previously painted but you are unsure as to whether or not it was with chlorinated rubber or
More informationUNIT 11: PAINTING, STAINING, AND FINISHING
KEY CONCEPTS 1. Equipment needed 2. Primary kinds of Paint: Interior/Exterior 3. Primary kinds of Stain: Interior/Exterior 4. Proper application techniques: Paint/Stain/Finish 5. Equipment care and clean
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationEXTERIOR PAINTING
SECTION 099113 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSealer-Primer-Undercoat
Sealer-Primer-Undercoat TECHNICAL BULLETIN PREMIUM TRADE 100% ACRYLIC PRODUCT TYPE Waterbased Exterior 100% Acrylic. DESCRIPTION is low odour, exterior grade sealer / primer / undercoat, with good opacity,
More informationProduct Data Sheet Brite Red Aluminum
Product Data Sheet Rust Proof Any-way spray paint voc/carb mir: flat
More informationSUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY
SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY REV. DATE DESCRIPTION OF CHANGE AND REASON FOR CHANGE A JUNE 10, 1999 NEW ISSUE B JULY
More informationNOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).
Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as
More informationSECTION PAINTS AND COATINGS. a. Section Submittal Procedures: Requirements for submittals.
SECTION 09900 PART 1 GENERAL 1. SUMMARY: a. Section includes surface preparation and field application of paints and other coatings. 2. SUBMITTALS: a. Section 01330 - Submittal Procedures: Requirements
More informationSuperior Industries Inc.
Superior Industries Inc. Pro Master Pool Coating THE FOLLOWING STEPS & PROCEDURES MUST BE FOLLOWED TO HAVE A SUCCESSFUL POOL PAINT APPLICATION SEVEN STEPS TO SUCCESSFUL SWIMMING POOL PAINTING CONTENTS
More informationMAINTENANCE GUIDE: Interior
Ferrous Metal Enclosed Offices Leasing Ofices Lunchrooms Meeting & Conference Rooms Office Doors & Door Jambs On previously painted surfaces, wash to remove dirt, grease, oil, mildew, and other contaminants.
More informationExterior. How to paint
How to paint Exterior Choosing the right paint, gloss and primer Estimating the correct amount of paint Using the right tools and supplies Prepping and painting Cleaning up and caring for your walls How
More informationFinishing Finishing Instructions Painting Tips Aluminum Astragal Painting Doorlite Frame Finishing
Finishing... 2.3 Painting Tips... 2.6 Aluminum Astragal Painting... 2.9 Doorlite Frame Finishing... 2.10 SITE 2 2017 2.1 2.2 2017 SITE 2 SITE 2 2017 2.3 2.4 2017 SITE 2 SITE 2 2017 2.5 Painting Tips Therma-Tru
More informationPaint Problems. Although you ve probably never thought about it, paint. and How to Prevent Them
Paint Problems and How to Prevent Them Knowing why paint fails is the best way to get a long-lasting, problem-free paint job By Patrick MccoMBe Although you ve probably never thought about it, paint manufacturers
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationDuraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications
PAGE 1 OF 5 Description & Uses Solver Duraguard Matt is an ultra premium quality, 100% acrylic, self priming exterior water-based coating, suitable for direct application to most surfaces including timber,
More informationPRESTON HEALTH SERVICES ARCHITECT'S NO MITCHELL-HOLLINGSWORTH NURSING & REHAB
SECTION 09 9123 - INTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationWHY PAINT JOBS FAIL. ADHESION: (Loss of)
WHY PAINT JOBS FAIL ADHESION: (Loss of) Carelessness and lack of skillful preparation of the surface are the major causes of poor adhesion. The application of a primer or protective coating material on
More informationA-LF-Sea. Application Manual for M&R. (Full blasting)
Application Manual for M&R (Full blasting) April 2015 1 Contents 1.Standard scheme 1)Standard scheme for flat & vertical bottom 2)Colour scheme for system 2.High pressure fresh water washing (HPFWW) 1)Timing
More informationPaint Problems and Solutions Guide. Endura Manufacturing Co. Ltd th Street Edmonton, Alberta T5L 2J
Paint Problems and Solutions Guide Endura Manufacturing Co. Ltd. 12425 149th Street Edmonton, Alberta T5L 2J6 1-800-661-9930 www.endura.ca Table of Contents Paint problems are easy to spot, but in many
More informationIdentifying Common Interior Paint Defects/ Complaints
Identifying Common Interior Paint Defects/ Complaints Use of low quality semi-gloss or gloss acrylic paints Use of flat paint in highly trafficked areas, where a higher sheen level would be desirable Use
More informationData Sheet 5741 Englisch
Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl
More informationAPPLICATION HANDBOOK for BUILDING COATINGS for Thermal Insulation, Mold Resistance, UV Resistance, Lead Abatement
Sustainability Simplified. Very Simple. Award Winning Energy Saving and Asset Protection Coatings APPLICATION HANDBOOK for BUILDING COATINGS for Thermal Insulation, Mold Resistance, UV Resistance, Lead
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect
More informationSECTION PAINTING
SECTION 099100 PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationPainting Wood. 1 of /01/27 01:45 PM. One-component paint system on wood (all wood types)
Painting Wood - NA Inc. 1 of 10 2015/01/27 01:45 PM Painting Wood Surface preparation of wood above the waterline Cleaning Make sure the wood is dry and free of all dirt, wax or other contamination before
More informationBRUSH APPLICATION INSTRUCTIONS
QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage
More informationFull Product Name. Products. Properties. 2K Etch Primer. Type of Product Description
Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V PRIME Acrylic Urethane Surfacer P 238 DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable
More information2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX
2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX PICTOGRAM DESCRIPTION Degrease Machine sand dry Hand sand wet Hand sand dry Scotch Brite Use Akzo Measuring Stick Ready to Spray Mixing Ratio: 2
More information225 Carpenter Avenue Wheeling, Illinois Fax:
225 Carpenter Avenue Wheeling, Illinois 60090 800-323-8611 Fax: 847-541-9043 www.sunysidecorp.com ENV I LY AL MEN T ON R Sunnyside Corporation's Custom Packaging and Private Labeling Division is your single
More informationSuggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002
Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for
More informationSURFACE FINISH MAINTENANCE
SURFACE FINISH MAINTENANCE SURFACE FINISH MAINTENANCE Lumec strongly recommends that you maintain your luminaires twice a year in order to prolong the appearance of the finished surface. By following this
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V-PRIME DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V-PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable for the wide range of day-to-day
More informationSILICONE RESIN PAINT FOR MASONRY FACADES
TIKKURILA SILICONE RESIN PAINT FOR MASONRY FACADES DESCRIPTION Water-borne silicone emulsion paint. RECOMMENDED USES Residential, commercial, industrial and storage buildings and others. PRODUCT FEATURES
More informationREQUEST FOR PROPOSALS
REQUEST FOR PROPOSALS PROJECT: Painting of the Signal Poles, Mast Arms and Decorative Bases OWNER: City of Goose Creek, Department of Public Works RECEIPT OF PROPOSALS: Separate sealed proposals for the
More informationApplication Handbook for Homes/Buildings
Application Handbook for Homes/Buildings FOR BUILDING ENVELOPE: Nansulate Energy Protect Nansulate HomeProtect Nansulate LDX Nansulate is Patented technology protected by U.S. and international Patents.
More informationMetal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces
Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Product Description A-Chromatic s ECP11 White, ECP15 Gray, and ECP17 Black are premium quality, low VOC primer surfacers specifically
More informationGetting Started. Types of Finishes. Specialty Finishes. Choosing the Right Finish
Getting Started Whether you are finishing your latest deck project or want to give your living room a warm look and feel, a new coat of paint or stain is one of the easiest ways to add value and style
More informationUPDATE REPORT 20 MONTHS AFTER TERMARUST OVERCOATING
UPDATE REPORT 20 MONTHS AFTER TERMARUST OVERCOATING High Pressure (5,000 psi) Water Wash Cleaning And Overcoating of a Historic (1915) truss bridge on Route 778 over the Middle River - in Augusta County,
More informationPlease also carry out relevant test patches to ensure product compatibility and colour satisfaction.
INGILBY WATER BASED PAINTS GENERAL TIPS AND OBSERVATIONS In order to help projects run smoothly, if, at any stage during application, guidance is required please do not hesitate in contacting us for advice.
More informationGloss Volume Solids 88 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 24 hours 12 hours 8 hours Max. 72 hours 24 hours 24 hours
W-POXI DFA 301 PRODUCT DESCRIPTION: INTENDED USES: Bicomponent polyamine epoxy paint, of high thickness, being part of the class of Low VOC, being able to be applied in internal environments, closed or
More informationImpredur Silk Matt Enamel 880
Data Sheet Silk Matt Enamel 880 aromatics-free, premium quality, for exterior and interior use Field of Application Properties Material description Standard colors Gloss grade Base material For high-quality
More informationB. Samples: For each exposed product and for each color and texture specified.
SECTION 095113 -ACOUSTICAL PANEL CEILINGS PART 1- GENERAL 1.1 SUMMARY Section includes acoustical panels and exposed suspension systems for ceilings. Work is limited to modification of existing acoustical
More information3M Scotchkote System Application Guide. High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding
High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding - Issue 1 Surface Preparation & Cleaning Application of Patch Primer to Corroded Areas Application of Primer to Patch Primed
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline ROLLER Application Instructions www.antifoulingpaint.net THANK YOU! Thank you for selecting Velox Plus Antifouling Paint
More informationDAP 33 Window Glazing
DAP 33 Window Glazing PRODUCT DESCRIPTION DAP 33 Window Glazing is a ready-to-use glazing compound that may be used for face glazing wood or metal sash. Its knife-grade consistency allows for smooth, easy
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Description A-Chromatic Surfacers ECP11 White, ECP15 Gray, ECP17 Black are premium quality low VOC primer surfacers,
More informationProduct Data Sheet RUST PROOF ANY-WAY SPRAY PAINT. No /14. Aervoe Industries, Inc.
Product Data Sheet RUST PROOF ANY-WAY SPRAY PAINT VOC/CARB MIR: FLAT
More informationPaint, Caulk & Adhesives
Paint, Caulk & Adhesives Keep your equipment looking great with these industrial enamel paints. Find the exact paint for your tractor or implement with brand-specific paints from Ag Specialty or the Industrial-grade
More informationVolume Solids %
Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity
More informationData Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description.
0 Enamel 2388 2K-Aqua Seidenmattlack 2388 Englisch water-based, two-component, highly resistant to mechanical and chemical stress, AgBB certified, for interior and exterior use, with 2K-Aqua Hardener 2380
More informationAPPLICATION NOTE - SR001. Cold Weather Application
APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in
More informationSECTION EXTERIOR PAINTING PART 1 - GENERAL
13414.01 EXTERIOR PAINTING 099113-1 SECTION 099113 - EXTERIOR PAINTING 1.1 SUMMARY PART 1 - GENERAL A. Section includes surface preparation and the application of paint systems on the following exterior
More informationDurabrac Gable Bracket Installation Guide
Durabrac Gable Bracket Installation Guide Durabrac vinyl gable brackets are manufactured from high quality natural white vinyl with UV inhibitors. There are currently six styles and three sizes to choose
More informationProduct Data Sheet August 2006 (Updated in December 2014)
Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey
More informationPaint problems and. Solutions. Identifying and solving common paint problems Finding the right paint products to fix the problem
Paint problems and Identifying and solving common paint problems Finding the right paint products to fix the problem Solving common paint problems The paint inside and outside your home is in a constant
More informationLUXAPOOL EPOXY POOL COATING APPLICATION GUIDE. New Cement Pools
LUXAPOOL EPOXY POOL COATING APPLICATION GUIDE New Cement Pools 1. The render should consist of fresh cement and pure, clean sand only. Allow the render to cure for a minimum of 21 days prior to any preparation
More informationITEM NO. DESCRIPTION BIDDER CODE NO. UNIT COST UNIT COST 1 GALLON 5 GALLON. 1 Oil Base Exterior House Paint Glidden Profess 2516 $22.
BID ON: PAINT AND SUPPLIES BID NO: 10-135 OPENED: DECEMBER 3, 2010 @ 2:00 PM 1 Oil Base Exterior House Paint Glidden Profess 2516 $22.00 Acrylic Latex Exterior Gloss House Paint 2 Super White Glidden Profess
More informationPaints for sheet-iron roofs. For corrosion protection of metal surfaces outdoors
Paints for sheet-iron roofs For corrosion protection of metal surfaces outdoors 2 On roofs since 1964 Metallic roofing materials have been used for protecting the roofs of wooden houses since the 19th
More informationDESCRIPTION/APPLICATION HK RESEARCH GEL COATS DESCRIPTION
Product Data 908 LENOIR ROAD POST OFFICE BOX 1809 HICKORY, NORTH CAROLINA 28603-1809 TELEPHONE (828) 328-1721 TOLL FREE (800) 334-5975 FAX (828) 328-4572 DESCRIPTION/APPLICATION HK RESEARCH GEL COATS DESCRIPTION
More informationPaint Spraying: Spray gun parts Student A:
Paint Spraying: Spray gun parts Student A: You need to replace some parts for your spray gun. However, you don t know the name of the part, or the part number. Telephone a paint gun supplier and order
More information