ACRYLITE LED White 0V606

Transcription

1 Product Information ACRYLITE LED White 0V606 Product Profile: ACRYLITE LED White 0V606 is specifically engineered for uniform light distribution when backlit with strong LED light sources. Combined with high light transmission, the diffusion grade also has the ability to eliminate disturbing hotspots (spots of light created by the LED source). These properties make it possible to reduce the spacing required between the cover and the light source, optimizing the wall thickness of the component. Components that are manufactured with this coloring appear optically white in reflected light. ACRYLITE LED White 0V606 is characterized by diffuse scattering of light, and is offered in the following ACRYLITE polymers: ACRYLITE 8N, ACRYLITE H12, ACRYLITE H15, and ACRYLITE Resist zkx. Typical properties of ACRYLITE acrylic polymers are: excellent weather resistance high mechanical strength high surface hardness and mar resistance various melt flow rate When combined with our ACRYLITE Resist zkx acrylic polymers, properties such as enhanced impact resistance, toughness, heat and chemical resistance can be achieved, without sacrificing optical clarity. Such characteristics are ideal for resisting the adverse effects of outdoor weathering. Application: ACRYLITE LED White 0V606 in the respective base molding compound is appropriate for injection molding, extrusion and injection blow molding. The manufactured molded parts are intended for lighting applications with LED backlighting. Examples: Light fixture covers, LED-lighting rails, bulbs, façade lighting and lighting switches. Processing: ACRYLITE LED White 0V606 can be processed in injection molding machines with 3-zone general purpose screws. Surface Finish: A matte surface finish can be achieved when parts are manufactured in an extrusion process. Physical Form / Packaging: ACRYLITE LED White 0V606 is provided in uniform pellets, available in packaging of 1500 lb gaylords, 375 lb drums or 25 lb & 50 lb sample box packages. Goniometer: Half-value angle and scattering power as measured by a goniometer for ACRYLITE LED White 0V606 in thicknesses: Properties Material thickness Parameter Unit Standard 1 mm 2 mm 3 mm 4 mm Light transmission D 65 % ISO Half-Value Angle DIN Scattering power DIN Max. luminance cd/m Evonik Cyro LLC ACRYLITE April 2013 Page 1/5

2 Goniometer polar diagrams: Luminance [cd/m 2 ] as a function of the measured angle [ ] of ACRYLITE LED White 0V606 Material thickness 1 mm Material thickness 2 mm Material thickness 3 mm Material thickness 4 mm Evonik Cyro LLC ACRYLITE April 2013 Page 2/5

3 Light distribution with LED backlighting Distance of the molded ACRYLITE LED White 0V606 to the LED rear lighting is 5 mm. Luminance distribution measured in 1, 2 and 3 mm material thickness. LED: OSRAM Diamond DRAGON LUW W5AP Test setup: Evonik Industries AG mm 2mm 3mm Luminance allocation [cd/m²] Distance of the LEDs in image pixels = 3cm Luminance distribution in false color: 1 mm 2 mm 3 mm Evonik Cyro LLC ACRYLITE April 2013 Page 3/5

4 Light distribution with LED backlighting Distance of the molded ACRYLITE LED White 0V606 to the LED rear lighting is 10 mm. Luminance distribution measured in 1, 2 and 3 mm material thickness. LED: OSRAM Diamond DRAGON LUW W5AP Test setup: Evonik Industries AG mm 2mm 3mm 100 Luminance allocation [cd/m²] Distance of the LEDs in image pixels = 3cm Luminance distribution in false color: 1 mm 2 mm 3 mm Evonik Cyro LLC ACRYLITE April 2013 Page 4/5

5 This information and all technical and other advice are based on Evonik present knowledge and experience. However, Evonik assumes no liability for such information or advice, including the extent to which such information or advice may relate to third party intellectual property rights. Evonik reserves the right to make any changes to information or advice at any time, without prior or subsequent notice. EVONIK DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SHALL HAVE NO LIABILITY FOR, MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR A PARTICULAR PURPOSE (EVEN IF EVONIK IS AWARE OF SUCH PURPOSE), OR OTHERWISE. EVONIK SHALL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES (INCLUDING LOSS OF PROFITS) OF ANY KIND. It is the customer s sole responsibility to arrange for inspection and testing of all products by qualified experts. Reference to trade names used by other companies is neither a recommendation nor an endorsement of the corresponding product, and does not imply that similar products could not be used. ACRYLITE, ACRYMID, CYROLITE, CYREX, CYRO, Vu-Stat and XT polymer are registered trademarks of Evonik Cyro LLC. Evonik Industries is a worldwide manufacturer of PMMA products sold under the ACRYLITE trademark in the Americas and under the PLEXIGLAS trademark on the European, Asian, African and Australian continents. = registered trademark Evonik Cyro LLC 299 Jefferson Road, Parsippany, NJ USA Phone cyro.polymer@evonik.com Technical Support: visit the TechKnowlogy Center at cyro.custhelp.com File: ACRYLITE LED 0V606_Y; As of: 04/11/2013 Evonik Cyro LLC ACRYLITE April 2013 Page 5/5