General info. Working principle. Performance
|
|
- Cordelia Malone
- 5 years ago
- Views:
Transcription
1 GEA MultiTrack
2 General info The GEA MultiTrack is an on-line meat analyser for measuring fat, moisture and protein in unprocessed meat with up to 2% salt, but without spices, water, ice or any other additives. Mechanically Deboned Meat (MDM) and petfood raw materials can also be analysed. Measuring is performed continuously in the process, whether done in a mixer or in a screw conveyor during filling. MultiTrack enables the fat and lean meat ratio of a batch to be automatically measured and standardized. Reduced lean give-away Consistent product quality No human interaction Representative of whole batch Full documentation and traceability Working principle The GEA MultiTrack is based on NIR transmission technology. The sampling device automatically and continuously extracts random samples during the process, ensuring the results are representative of the entire batch - another advantage over the hand-picked sample method. Near-infrared light is emitted by a lamp and passed through the meat in the detector unit. Non-absorbed light is measured by a detector and the data is by a software algorithm converted into the actual fat, moisture and protein content. NIR transmission technology Representative sampling Independent prediction of fat, moisture and protein Performance The GEA MultiTrack is a precision in-line fat analyser with an accuracy of 1 % for fat. Measuring is continuously performed in the process, either in a mixer, screw conveyor or pipeline. The results can be used for batch quality control documentation as well as for standardization of a batch to a certain fat target. The system is supplied with calibration for fresh or frozen pork and beef with a fat content from 4% to 65%. Other calibrations with fat range up to 85% are available as options. Conventional off-line analysis systems take representative samples that need to be prepared prior to analysis. Even with fast off-line analysis systems, this approach means the machines are non-productive for up to 15 minutes while waiting for results. With the GEA MultiTrack on-line continuous fat analysis, the results for fat, moisture and protein are available the moment production stops, minimizing delays. Based on these results, an integrated standardization module calculates the amount of fat or lean needed to reach the required target. Precise measurement of fat, moisture and protein Standardization calculator Reduced lean give-away Increased line capacity Several calibrations available as option GEA MultiTrack 2/5
3 Flexibility The GEA MultiTrack can be mounted on the following machines, new as well as existing: All GEA Mixers GEA ScrewLoader 400 or bigger screw conveyors Mounting options Fits on ProMix, UniMix and ScrewLoaders Return on investment Lean give-away can be reduced by up to 3 % due to the fact that MultiTrack is analysing each and every batch instead of just manual spot samples, and because the fat target value can be moved closer to the declaration limit. MultiTrack is giving the fat result and amount of correction material imidiately after the filling process is finished, which means that capacity can be improved by up to 20 % due to no waiting time for manual sampling, sample preparation and off-line analysis. Return of investment can be less that 0.5 year. Lean give-away reduced by up to 3 % Capacity improvement up to 20 % Payback time < 0.5 year Hygiene The GEA MultiTrack is designed for easy handling and sanitation with either fixed or hinged detector unit. The feed system is pumping the meat through the detector unit after which the meat is returned by a 3 pipe with inspection glass and a manual 3-way valve for easy sample extraction. An accessory trolley for easy storage and cleaning of parts is included. Easy operation and cleaning Hygenic design and easy to sanitize Easy sample extraction Safety The GEA MultiTrack fully complies with CE regulations. CE approval GEA MultiTrack 3/5
4 Controls The MultiTrack is equipped with a separate control unit with a 3 metres long hose connecting optical fibre and cables to the detector unit. The control unit can be mounted on the machine or on a separate rack. The control unit consists of a 10 colour touch screen integrated in the front door of the control unit. For easy operation, the user interface complies with GEA Operation. The GEA MultiTrack can be fully integrated into the machine control (new installations) and operated via the mixer operator panel. Only programming, set-up and service operations are made from the MultiTrack operator panel. This enables fully automated product specific mixing and analysing sequences. If retrofitted to existing equipment, the GEA MultiTrack is operated from an independent panel. All batch results and data are transferred to a standard desktop PC for easy traceability and back-up. Integrated/stand-alone operation Complies with GEA Operation Traceability and data back-up Technical specifications Label Screw Twin Screw Unit Compressed air supply l/hr Electric power kw Machine weight kg Dimension 460 x 182 x x 182 x 185 mm Accuracy 1 1 % Fat range 4 to 85 4 to 85 % Temp. range -5 to to 10 C Min. measuring time 2 2 Min. Accessories / Options GEA Process Controls Automate management of production recipes Scheduling of production batches Production reporting Material tracking and tracing Manually influence production GEA MultiTrack 4/5
5 We live our values. Excellence Passion Integrity Responsibility GEA-versity GEA Group is a global engineering company with multi-billion euro sales and operations in more than 50 countries. Founded in 1881, the company is one of the largest providers of innovative equipment and process technology. GEA Group is listed in the STOXX Europe 600 Index. GEA info@gea.com gea.com 2018/05/22 13:22:32 - The information contained in this brochure merely serves as a non-binding description of our products and is without guarantee. Binding information, in particular relating to capacity data and suitability for specific applications, can only be provided within the framework of concrete inquiries. Subject to modification. GEA
GEA PowerGrind 200. Επίσημος Αντιπρόσωπος: Επίσημος Αντιπρόσωπος:
GEA PowerGrind 200 General info The GEA PowerGrind represents a new generation GEA grinders with improved capacity, hygiene and safety performance. These aspects are combined with high flexibility, robustness,
More informationGEA FreshFormer. Επίσημος Αντιπρόσωπος:
GEA FreshFormer Επίσημος Αντιπρόσωπος: General info The GEA FreshFormer increases flexibility in fresh meat forming and saves money by significantly reducing the residue (giveaway) at changeover. It forms
More informationGEA TempuMixer Module II. Επίσημος Αντιπρόσωπος:
GEA TempuMixer Module II Επίσημος Αντιπρόσωπος: General info The GEA TempuMixer II is an automated tempura mixer that ensures a mix with consistent viscosity, composition and temperature. It features in-line
More informationGEA CutMaster : The reference The reference in cutting & emulsifying. engineering for a better world
GEA CutMaster : The reference The reference in cutting & emulsifying engineering for a better world Content GEA CutMaster range GEA CutMaster A selection of GEA CutMaster applications GEA CutMaster DUO
More informationGEA PowerGuide. Επίσημος Αντιπρόσωπος:
GEA PowerGuide Επίσημος Αντιπρόσωπος: General info The GEA PowerGuide compliments any GEA thermoformer.pack converging into a single lane is a key function in all automated packaging operations centred
More informationGEA biosolids Decanter prime
GEA biosolids Decanter prime 1 GEA biosolids Decanter prime Energy consumption reduced by up to 50 % 2 GEA biosolids Decanter prime Outstanding Energy Efficiency of GEA biosolids Decanter prime GEA biosolids
More informationGEA proplus. The major plus in protein yield, with GEA Separators
GEA proplus The major plus in protein yield, with GEA Separators 2 GEA PROPLUS GEA proplus for better milk skimming and bacterial removal Protein yields Protect the environment Steady operation A win-win
More informationGEA VARIPUMP. GEA Hilge SIPLA. Single-stage, Self-priming Side Channel Pumps for Advanced Applications
GEA VARIPUMP GEA Hilge SIPLA Single-stage, Self-priming Side Channel Pumps for Advanced Applications Optimize Your Cleaning Processes Ensure maximum process safety with the GEA Hilge SIPLA pump series
More informationGEA pathfinder GMP. Separator plant for innovative product development in the technical centre
GEA pathfinder GMP Separator plant for innovative product development in the technical centre 3 Starting point for the next product success Developing pioneering pharmaceutical products simply and flexibly
More informationGEA Omni TM control panel. The intuitive touch for refrigeration and gas compression control technology. Evaporator. Compressor. OmniView.
Compressor Evaporator OmniView Condenser Sequencer Energy Saver GEA Omni TM control panel The intuitive touch for refrigeration and gas compression control technology engineering for a better world GEA
More informationGEA PowerPak. Επίσημος Αντιπρόσωπος:
GEA PowerPak Επίσημος Αντιπρόσωπος: General info The GEA PowerPak thermoformer is especially adapted to your application (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging) from
More informationGEA Aquarius BunchWrapper
GEA Aquarius BunchWrapper Good looking, high quality, wrapping differentiates your products and therefore will make sure your product will be recognized and will make sure that customers wants to buy your
More informationGEA Aquarius BunchWrapper Label-on-film
GEA Aquarius BunchWrapper Label-on-film Good looking, high quality, wrapping differentiates your products and therefore will make sure your product will be recognized and will make sure that customers
More informationGEA Gating for Automated Milking Systems. Solutions to help simplify cow routing and herd management
GEA Gating for Automated Milking Systems Solutions to help simplify cow routing and herd management 2 GEA GATING FOR AUTOMATED MILKING SYSTEMS GEA Manual Lifting Gate Create the ultimate in routing and
More informationGEA Grasso screw packages. The full range of GEA Grasso screw packages. engineering for a better world. GEA Refrigeration Technologies
GEA Grasso screw packages The full range of GEA Grasso screw packages engineering for a better world GEA Refrigeration Technologies Whether it s in the food industry, chemical industry, in offices or in
More information6.00 INFRARED ANALYZER
FREQUENTLY ASKED QUESTIONS PAGE 1 OF 7 QUESTION 1 What is the difference between the application for the IRPC one constituent, and the IRPC multi-constituent? ANSWER 1 The IRPC NIR Analyzer, one constituent,
More informationGEA Screw Packages. Plug & play compressor units for industrial refrigeration and air conditioning
GEA Screw Packages Plug & play compressor units for industrial refrigeration and air conditioning 2 3 Top quality based on proven development Whether it s in the food industry, chemical industry, in offices
More informationGEA DairyRotor T8900. High performance in unique design
GEA DairyRotor T8900 High performance in unique design 2 GEA DAIRYROTOR T8900 THE GEA DAIRYROTOR T8900 rotary milking parlor is made to meet high demands of dairy farms around the world. GEA DAIRYROTOR
More informationGEA AutoRotor Global. Proven AutoRotor efficiency and reliability
GEA AutoRotor Global Proven AutoRotor efficiency and reliability 2 GEA AUTOROTOR GLOBAL Legendary AutoRotor Efficiency Available in a low-maintenance, extremely durable parlor GEA AUTOROTOR GLOBAL 3 The
More informationEQUIPMENT INFORMATION
OPTICAL (NIR) MEASURING SYSTEM UR 5500 LED EQUIPMENT INFORMATION Robert-Bosch-Straße 5 D-56566 Neuwied Tel. +49 (0) 26 31 / 96 40 00 Fax. +49 (0) 26 31 / 96 40 40 Internet: www.sensor-control.de E-Mail:
More informationGEA MultiDrum for authentic homestyle breading Perfect homestyle appearance, reduced labor, dust free
GEA MultiDrum for authentic homestyle breading Perfect homestyle appearance, reduced labor, dust free engineering for a better world Re-create authentic homestyle breading A coarse, high pick-up, golden
More informationOILS. Food. Paper. Wood PROTEINS PRODUCT CATALOG. Plastics. Fibers. Thickness Pellets FATS. Moisture. Optimize Drying.
Moisture Measurement & Control From Lab To Line ALCOHOL Engineered Wood Moisture Food CHEMICAL BRICK CONTROL Adhesives Wood BIOFUELS Ceramics Thickness Pellets Polymers OILS Plastics Tobacoo FATS Improve
More informationSalmon Fresh Slicing. Horizontal slicing
Salmon Fresh Slicing Horizontal slicing High quality slicing Automatic in-feed and out-feed Minimum waste User-friendly operation Easy-to clean design Horizontal slicing machines Within fresh slicing of
More informationGEA Bakery Solutions. GEA Bakery Solutions 1
GEA Bakery Solutions GEA Bakery Solutions 1 2 GEA Bakery Solutions GEA Bakery Solutions 3 GEA becomes a major force in the bakery sector Together, more than 100 years of experience in the bakery sector.
More informationMeasurement & Control Technology
Measurement & Control Technology For process and laboratory analysis s Material properties s Colour measurement s Radiation measurement s Moisture measurement (NIR, microwave & RF) s Refractometers M.C.
More informationChillers for the industrial refrigeration and air conditioning
GEA Grasso chillers Chillers for the industrial refrigeration and air conditioning engineering for a better world GEA Refrigeration Technologies Whether it s in the food industry, chemical industry, in
More informationThe only source of knowledge is experience
www.cmp-pharma.it The only source of knowledge is experience Our Mission Towards the future» Excellence CMP was imagined, projected and managed with the target of becoming a high-quality company. A strong
More informationCoating Thickness Measurement System
Spectral Sensors by Carl Zeiss Coating Thickness Measurement System INTRODUCTION Designed to meet the needs of industry, the LABCOAT system provides a simple and precise way to measure transparent coatings
More informationReference number Dimensions Lamp Light colour
1 LED STRIPS PRO up to 152 lm/w LESS IS MORE FLEX: LED strip PRO Type of Protection: IP 00 IP 66 CVD Protection Class: III Flexible LED strip on roller (5 m). Mounting using 3M Thermal double-sided tape.
More informationVacuum casting systems
Renishaw vacuum casting systems H-5800-0110-01-E Vacuum casting systems From master model to multiple components within 24 hours Save development time and money with Renishaw vacuum casting High quality
More informationGEA Diessel Your strong partner for the food and beverage industries
GEA Diessel Your strong partner for the food and beverage industries engineering for a better world GEA Process Engineering GEA Diessel is the process plant specialist for free-flowing products. Since
More informationclarity sorting solutions for paper, cardboard
clarity sorting solutions for paper, cardboard TASK The purer a sorting fraction of waste paper is, the more specifically can it be fed back into paper production as a raw material. A decisive quality
More informationSupplement. ScanMaker i280 features, scenarios, and information. Getting to Know Your ScanMaker i280
Supplement ScanMaker i280 features, scenarios, and information Getting to Know Your ScanMaker i280 The ScanMaker i280 is a high resolution scanner for reflective scanning. It features 4800 x 9600 dpi,
More informationTECHNICAL SPECIFICATIONS for 300KV CONSTANT POTENTIAL X RAY EQUIPMENT (for industrial applications) S. No. PARTICULARS BHEL SPECIFICATIONS
TECHNICAL SPECIFICATIONS for 300KV CONSTANT POTENTIAL X RAY EQUIPMENT (for industrial applications) BIDDER s OFFER S. No. PARTICULARS BHEL SPECIFICATIONS 1.0 Area of Application The 300kV Constant potential
More informationCompact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750
[ E[M]CONOMy] means: Compact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750 3-axis CNC milling machines for the machining of small to medium lot sizes EMCOMILL 1200 Test UNI ISO 10791-7
More informationCNC-Processing Center Venture 109
CNC-Processing Center 2014/2015 lights: Routing dimension in Y direction: 1550 mm Vector speed X/Y 80 m/min Simple positioning of the vacuum cups through the pin laser 24 vacuum cups in standard version
More information5-Axis. Technology. Premium. 5 i. uts. End products without undercuts. Disk jig. 6P Glass multi jig. Premill multi jig. 8P Glass multi jig
Disk jig Possible to be equipped with a 98.5mm disk. Special-designed jig that can maintain high precision even after a long-time use due to its stable and durable features. 6P Glass multi jig 5Axis Machining
More informationS110 / S120. Key data. The practical machines for your specific grinding solution. A member of the UNITED GRINDING Group. The Art of Grinding.
The Art of Grinding. A member of the UNITED GRINDING Group The practical machines for your specific grinding solution. Key data The are very flexible internal cylindrical grinding machines for machining
More informationComplete processing. lines for sidelights. In-line automation
In-line automation Complete processing lines for sidelights Throughout the glass industry, speed, and endproduct quality are now the norm. The needs of the hightechnology and high-volume automotive glazing
More informationProfessional Dual-Laser Infrared Thermometer with 50:1 Distance-to-Sight Ratio, Data Logging, USB Output, Single Type K Input, and Temperature Alarm
User Manual 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Professional Dual-Laser Infrared Thermometer with 50:1 Distance-to-Sight
More informationOptical Sensor Systems from Carl Zeiss CORONA PLUS. Tuned by Carl Zeiss. The next generation in the compact class
Optical Sensor Systems from Carl Zeiss CORONA PLUS Tuned by Carl Zeiss The next generation in the compact class Standard: Innovative spectrometer technologies, superior measuring convenience, optimal handling.
More informationSetup and Operation Guide
Rapidmix 400CW Setup and Operation Guide Automated Control Systems - Rapidmix 400CW - Setup Instruction Manual - Issue 2 (Page 1) Table of Contents Index Machine Setup Calibration Prerequisites 5 Materials
More informationRGB Cuttable every 100 mm. 60 LEDs per meter (LED Pitch 16,7 mm). Constant luminous flux by means of transistor
LED STRIPS 1 LESS IS MORE FLEX: LED strip ECO Type of Protection: IP 00 IP 66 CVD Protection Class: III Flexible LED strip on roller (5 m). Mounting using 3M Thermal double-sided tape. Voltage 24 V. ECO
More informationTechnical Information OUSBT66
TI00469C/07/EN/02.13 71127776 Products Solutions Services Technical Information OUSBT66 Hygienic sensor for cell concentration measurement using NIR absorption Application Cell growth in bacterial fermentation
More informationCNC machining centres. accord wd. Cnc Machining cell for doors and windows
CNC machining centres accord wd Cnc Machining cell for doors and windows accord wd Cnc Machining cell for doors and windows Flexible work cell for the production of door and window frames, fitted with
More informationGEA AutoRotor Magnum 90 Rotary Milking Parlor. Increase cow flow, reduce labor and improve operating efficiency
GEA AutoRotor Magnum 90 Rotary Milking Parlor Increase cow flow, reduce labor and improve operating efficiency 2 GEA AUTOROTOR MAGNUM 90 ROTARY MILKING PARLOR For more than two decades, rotary parlors
More informationCollars - Special Cable Ties. Accessories
Collars - Special Cable Ties Accessories BLACK NYLON COLLARS Fixing Collars in black nylon 12. The collar is fastened by buckling the tail through the head, the tail is then held in place by the action
More informationCNC-Processing Center Venture 109
CNC-Processing Center Venture 109 Venture 109 Highlights: Vector speed X/Y 80 m/min Simple positioning of the vacuum cups through the pin laser 24 vacuum cups in standard version K-table tubeless vacuum
More information14.01 INFRARED ANALYZER
DEMO EQUIPMENT METHOD PAGE 1 OF 11 COMPACT NIR ANALYZER (MOISTURE MEASUREMENT) 24 VDC power supply POWER SUPPLY BOX 110 VAC/24 VDC REFERENCE PLATE Laboratory bracket FUNCTION AND PURPOSE OF THE INSTRUMENT
More informationCatalogue 1SFC en, Edition 3 November 2003 Supersedes Catalogue 1SFC en, Edition 2 November Arc Guard System TVOC
Catalogue 1SFC 266006-en, Edition 3 November 2003 Supersedes Catalogue 1SFC 266006-en, Edition 2 November 2000 Arc Guard System TVOC System units The two units of the are used as below: Approvals 1. with
More informationEndress Hauser The Power of Know How. Turbidity and Solids Content Sensor TurbiMax P CUS 63 / CUS 63H
Technical Information TI 230C/07/en 51504293 Turbidity and Solids Content Sensor TurbiMax P CUS 63 / CUS 63H Turbidity and Solids Content Sensor for Low Concentrations in High-Temperature and Hazardous
More informationVERTICAL FORM FILL SEAL MACHINES
VERTICAL FORM FILL SEAL MACHINES AUTOMATIC PACKAGING MACHINES 49 Vertical Form, Fill Seal Machines: With over 30 years experience, Audion manufactures a complete line of reliable, flexible, low maintenance,
More informationGEA Thermoformers. Innovative solutions for food packaging
GEA Thermoformers Innovative solutions for food packaging 2 GEA THERMOFORMERS When it comes to packaging, we set the standard Encompassing fully developed, highly individual solutions, GEA's thermoformers
More informationHarvestLab & John Deere Constituent Sensing Training
HarvestLab & John Deere Constituent Sensing Training March 2016 John Deere - HarvestLab 2 John Deere Constituent Sensing What is John Deere Constituent Sensing? HarvestLab enhanced with John Deere Constituent
More information[Pick the date] Moisture Sensor
[Pick the date] Moisture Sensor Microwave NIR The value of online measurement is obvious. The devices supply reliable trend monitoring over the whole production cycle. For cheese, this measurement not
More informationINLENE. Industrial LED luminaire
INLENE Industrial LED luminaire Lediko INLENE luminaire 3 One answer to many industry needs. 50 90% cost reduction compared to traditional lighting Diverse needs of our Customers were the starting point
More informationPLANET 6G series. Vision Inspection for. Tablet & Capsule. Next Generation
Vision Inspection for Tablet & Capsule Next Generation PLANET G series l PLANET G Vision Inspection Capability Free Shape Tablet Application Time Saving New Product Setup Rapid Changeover cgmp Design Enclony
More informationPOWER CUBE SA/80 series
POWER CUBE SA/80 series The 100, 50, 25 kw Green Generators Features / Benefits High Power output High level of performance with minimal operating costs Automatic tracking and best optimization to load
More informationSignal Beacon - LED Series 6162
www.stahl.de > Versions rotating mirror beacon rotating beacon beacon with double flash (9 + 5 J) flashing beacon (15 J) LED-continuous beacon LED-rotating beacon > Seawater resistant aluminium enclosure
More informationCOMPRESSION STRENGTH TESTER
Turnkey Laboratories Solutions COMPRESSION STRENGTH TESTER ST-3077 EPC / PRODUCTS / APPLICATION / SOFTWARE / ACCESSORIES / CONSUMABLES / SERVICES Analytical Technologies Limited An ISO 9001 Certified Company
More informationRETURN systems. durable customer-specific space-saving. DESTACKING ROTATING
RETURN systems durable customer-specific space-saving durable customer-specific space-saving RETURN 04 Universal, simple return system with maximum benefit Barbaric Quality RETURN 03 Made in Austria As
More informationTRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
More informationdrilling solutions morbidelli ux100/ux200 CNC machining centre for flexible boring, routing and hardware insertion
drilling solutions morbidelli ux100/ux200 CNC machining centre for flexible boring, routing and hardware insertion the professional drilling Working centre realized to satisfy all the operations of boring,
More informationLaser Marking 2011 and Beyond. What is a Laser How does a Laser Work What Products are being Marked Why Laser marking is so Popular
Laser Marking 2011 and Beyond What is a Laser How does a Laser Work What Products are being Marked Why Laser marking is so Popular 3 Key Laser components 1. A laser source,- generates the laser beam. 2.
More informationGF Machining Solutions. Mikron MILL P 800 U ST
GF Machining Solutions Mikron MILL P 800 U ST Mikron MILL P 800 U ST Turning. Roughing. Finishing. One clamping operation. Mikron MILL P 800 U ST (simultaneous turning) is a new solution based on the successful
More informationGE Inspection Technologies. The ISOVOLT Titan E X-ray Generator
GE Inspection Technologies The Titan E X-ray Generator Robust, Reliable and Highly Accurate Stationary X-ray Generators for the Widest Range of Applications. The Reference Class for X-ray generators is
More informationlks1000-v3 IDEAL FOR ISO ENERGY MANAGEMENT
lks1000-v3 www.synergys-technologies.com IDEAL FOR ISO 50001 ENERGY MANAGEMENT leakshooter lks1000-v3 Ultrasonic compressed air, steam & vacuum leak detector with camera. USB Compressed air and steam are
More informationHardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
More informationCNC Gantry-Processing Centers Vantage 200
CNC Gantry-Processing Centers Vantage 200 02 HOMAG Vantage 200 Contents HOMAG Vantage 200 Contents 03 Vantage 200 The power pack among our nesting solutions The Result: YOUR SOLUTION Our CNC processing
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationBeam Analysis BeamWatch Non-contact, Focus Spot Size and Position monitor for high power YAG, Diode and Fiber lasers. Disruptive Technology
3.8 BeamWatch Non-contact, Focus Spot Size and Position monitor for high power YAG, Diode and Fiber lasers Instantly measure focus spot size Dynamically measure focal plane location during start-up From
More informationReciprocating compressors for industrial refrigeration
GEA Grasso V Series Reciprocating compressors for industrial refrigeration engineering for a better world GEA Refrigeration Technologies GEA Refrigeration Technologies, part of the internationally active
More informationEdge banders CNC machining centres Vertical panel saws Pressure beam saws. The perfect nesting technology DYNESTIC
Edge banders CNC machining centres Vertical panel saws Pressure beam saws The perfect nesting technology DYNESTIC 755 756 P R O D U C T I V I T Y A N D P R E C I S I O N D Y N E S T I C 7 5 5 7 5 6 Precise,
More informationThe New Techpap NIR spectroscopy for Recycled Paper Bales Inspection
The New Techpap NIR spectroscopy for Recycled Paper Bales Inspection Speaker: Didier Rech (Techpap) Authors: -Alain Cochaux (CTP France) -Pascal Borel (CTP France) -Guy Eymin Petot Tourtollet (CTP France)
More informationUniversal Internal Cylindrical Grinding Machine. S151 The Powerful. for large and complex workpieces. The Art of Grinding.
Universal Internal Cylindrical Grinding Machine S5 The Powerful for large and complex workpieces The Art of Grinding. S5 The Powerful for large and complex workpieces The powerful CNC Internal Cylindrical
More informationKPM Process Measurements
KPM Process Measurements Easy to use Successfully manage and control consistency Low cost of ownership Self-diagnostic products Leading-edge design Local service High precision Unique measurement solutions
More informationSyncore Analyst Technical data sheet
STOP PROGRAMM SET DOWN UP DOWN UP Syncore Analyst Technical data sheet With the Syncore Analyst, BUCHI is offering a solution for a fast, gentle and environmentfriendly multiple sample concentration to
More informationPhysical and Statistical Models for Optical Imaging of Food Quality
Physical and Statistical Models for Optical Imaging of Food Quality National Food Institute Day 20 May 2016 Jeppe Revall Frisvad Associate Professor DTU Compute Why inspect food quality? Consumers expect
More informationSANDYA 9 S. Automatic wide belt sander
UK SANDYA 9 S Automatic wide belt sander OUR TECHNOLOGY BEHIND YOUR IDEAS sandya 9 s Automatic wide belt sander with two or three operating groups CALIBRATING SANDING 3D DESIGN PROGRAMMING CUTTING EDGE
More informationStitchmaster ST 100 Retrofit Options
Systemservice Stitchmaster ST 100 Retrofit Options More Functions for Your Stitchmaster ST 100. Retrofit Options. Have your customers requirements changed? Are you looking to extend your range of functions
More informationDROP TESTER. PWB Level Drop Tester. Salon Teknopaja Oy (Ltd) Joensuunkatu SALO FINLAND
Salon Teknopaja Oy (Ltd) Joensuunkatu 5 24100 SALO FINLAND www.teknopaja.com 1 COMPANY INFO Salon Teknopaja Oy is located in Salo, Finland. It design, manufacture and set up tester devices. Main product
More informationWM en. Zero point clamping system SPEEDY hydratec 1
Zero point clamping system SPEEDY hydratec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY hydratec you will increase your production times to a maximum. This clamping element stands
More informationDevelopment of Multiple-Axes Intelligent Servo Amplifier "PQ"
1 / 5 SANYO DENKI Technical Report No.6 Nov. 1998 New Products Introduction Development of Multiple-Axes Intelligent Servo Amplifier "PQ" Shigejirou Miyata Nobuo Arakawa Shingo Takeuchi Hidenao Shouda
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationChallenger 400. Instruction manual
Challenger 400 Instruction manual 0349 301 097 041220 Valid for serial no. 448 DECLARATION OF CONFORMITY Murex Welding Products Ltd. Declare hereby that: Murex Challenger 400 Part No. 0349 308 110, 0349
More informationCNC machining centres. morbidelli p800. multifunctional machining centre for panel drilling routing and edge-banding
CNC machining centres morbidelli p800 multifunctional machining centre for panel drilling routing and edge-banding morbidelli p800 Designing and building solutions to your requirements is in our DNA You
More informationThermo Scientific SPECTRONIC 200 Visible Spectrophotometer. The perfect tool. for routine measurements
Thermo Scientific SPECTRONIC 200 Visible Spectrophotometer The perfect tool for routine measurements The Standard for Routine Measurements Thermo Scientific SPECTRONIC spectrophotometers have served as
More informationDigital CMOS Laser Sensor GV Series. Up to 1 m. Away. Stable detection of. metal targets. Innovative solution for. black targets
Digital CMOS Laser Sensor GV Series Up to 1 m Away Stable detection of metal targets Innovative solution for black targets Conventional laser sensors have problems with... Metals Multiple reflection Metal
More informationAE-250DS Automatic Wave Soldering Machine User s Manual
AE-250DS Automatic Wave Soldering Machine User s Manual Omxie/SMTmax Corp. www.smtmax.com Copyright 2006 1 P a g e Index of Content 1. Specifications 2. Power Supply 3. Operations 4. Maintenance 5. Warnings
More informationThe ultimate parallel stall featuring individual automatic gravity indexing and individual release
Magnum 90i Individual Indexing Parallel Stall The ultimate parallel stall featuring individual automatic gravity indexing and individual release GEA Milking & Cooling WestfaliaSurge engineering for a better
More informationSupplement. ScanMaker s450/s350 features, scenarios, and information. Getting to Know Your ScanMaker s450/s350
Supplement ScanMaker s450/s350 features, scenarios, and information Getting to Know Your ScanMaker s450/s350 The ScanMaker s450/s350 high-performance scanner with the versatility to scan photos and film.
More informationRD547 Intelligent Geophone. Multi-function leak detector
OPERATION MANUAL RD547 Intelligent Geophone Multi-function leak detector 90/RD547-OPMAN-ENG/01 ISSUE 1 07/2014 Read and understand this manual prior to operating the system Table of Contents 1 Preface...
More informationHoliday Detector mod. 284/35KV
Holiday Detector mod. 284/35KV Telemagnetica S.r.l. Via Teocrito, 36-20128 Milan - Italy Tel: +39-022552900 - Fax: +39-022553097 e-mail: info@telemagnetica.com - http: January 2013 BR-284-35KV-ENG-00 Pag.
More informationForename(s) Surname Number of seat
H National Quali cations 2015 X723/76/01 Mark Engineering Science FOR OFFICIAL USE TUESDAY, 12 MAY 1:00 PM 3:00 PM *X7237601* Fill in these boxes and read what is printed below. Full name of centre Town
More informationS20 The Compact for small precision components.
The Art of Grinding. A member of the UNITED GRINDING Group S20 The Compact for small precision components. Key data The S20 is a universal cylindrical grinding machine with electromechanical drives for
More informationAdditel 875 Series Dry Well Calibrators
Additel 875 Series Dry Well Calibrators Three models ranging from -40 to 660 Portable, rugged, and quick to temperature Metrology-level performance in stability, uniformity, accuracy and loading effect
More informationD5.1 Report on the design of a fibre sensor based on NIRS
Optical Fibre Sensors Embedded into technical Textile for Healthcare Contract no.: FP6-027 869 Quality control Version : 2.0 Security: PU Nature: Prototype + Report (P, R) Workpackage: WP5 Start date of
More informationAffordable Real-Time Vision Guidance for Robot Motion Control
Affordable Real-Time Vision Guidance for Robot Motion Control Cong Wang Assistant Professor ECE and MIE Departments New Jersey Institute of Technology Mobile: (510)529-6691 Office: (973)596-5744 Advanced
More informationGE Sensing & Inspection Technologies. The ISOVOLT Titan E X-ray Generator
GE Sensing & Inspection Technologies The Titan E X-ray Generator Robust, Reliable and Highly Accurate Stationary X-ray Generators for the Widest Range of Applications. The Reference Class for X-ray generators
More informationSupplement. ScanMaker s480/s380 features, scenarios, and information. Getting to Know Your ScanMaker s480/s380
Supplement ScanMaker s480/s380 features, scenarios, and information Getting to Know Your ScanMaker s480/s380 The ScanMaker s480/s380 is a high-performance scanner with the versatility to scan photos and
More information