Multi Channel Box. More Channels. Higher Resolution. Improved Ergonomics.
|
|
- Harriet Hines
- 5 years ago
- Views:
Transcription
1 Multi Channel Box. More Channels. Higher Resolution. Improved Ergonomics.
2 Multi Channel Box SPP Features: 1-4 sensor input channels (portable system) Real-time calculation of valve motion and valve rotation Data conversion 1 MHz, 16 Bit, position resolution 0.25 µm for a valve lift of 16 mm Output of the motion as voltage 0-10 V, ±10 V Analog output 1 MHz, 16 Bit Precision amplifier, 4 steps Offset, amplitude and phase adjustment Adjustment of each sensor is separately storable Display of sensor raw signals at BNC output USB interface (virtual COM interface) Open command language for device control Windows user interface Stand-alone measurement mode Housing system 1 : Robust aluminium housing Earthed housing Optionally with shield-ground separation Separate earth connector at housing 1 19 Systems for VTM-System with 4 channels or more 2 More channels available on request Scheduled options: Capable of being extended up to 32 measurement channels Encoder input for ratiometric position / angle output Digital inputs / outputs, controllable via USB Internal signal encoder Special software functions Customer-specific functions possible Applications: Measurement of valve lift and valve rotation in fired combustion engines Measurement of rotating or linear motion Item description: SPP-3001 Signal Processing Supported sensors: GLM711 AVA-UA - 1 mm GLM713 ASB-Ax - 3 mm GLM711 AVB-UA - 1 mm GLM714 ASB-Ax - (m0.3) 0.94 mm GLM711 ASB-Ax - 1 mm GLM715 ASB-Ax - (m0.4) 1.57 mm GLM712 ASB-Ax - 2 mm Part number 2 : Valve train measurement system 1 channel Valve train measurement system 2 channels Valve train measurement system 4 channels Valve train measurement system 4 channels, 19 2HE Block Wiring Diagram SPP-3001.
3 Multi Channel Box. Up to 32 Measuring Channels. Sensitec offers a completely new evaluation unit for the valve train measurement system (VTM-System). All the experience acquired with the successful 1-channel system has made a contribution to the development of this new device and many customer requirements are now implemented. The new unit (SPP-3001) is extendable up to 32 measurement channels, provides a higher resolution and offers better measurement comfort. The existing user interface has been completely revised and updated: A new look, extended features and more measurement functions are available. The system also now supports some additional sensors from Sensitec. Portable system Real-Time Valve Train Measurement. Compared to the previous model the SPP-3001 provides a considerably higher sampling frequency (1 MHz). The valve position is detected within 1 µm and the value is given in real time as analog voltage. The system provides a reliable measurement of rapid valve motion. The maximum lifting movement has been extended and the functionality to measure the valve rotation is completely integrated. Depending on the number of channels different housing systems are available. This simplifies the mechanical integration into the existing environment. Valve spring Valve stem How does the Measurement work? Sensitec Sensor highly integrated. Sensor module The measurement is based on a GMR sensor with a bias magnet which scans a ferromagnetic measurement structure machined into the valve stem. The measurement principle an also be applied for non-magnetic material, even though this requires some additional modifications. Since the sensor is very precise and exhibits negligible hysteresis the measurement accuracy is < 10 µm. Valve guide
4 Valve Train Measurement in Fired Engines. The VTM-System (Valve Train Measurement System) from Sensitec has been developed for the precise length measurement at difficult measuring sites such as the valve train measurement in fired combustion engines. With the development of the new VTM valve train measurement system the modern GMR sensor technology combined with a powerful evaluation electronics is able to solve a highly complex measurement task by means of a surprisingly simple and effective measurement solution. Initially the VTM-System has been developed for a direct measurement at the valve shaft. Nevertheless, it is no problem to use it for other applications, especially when precise measurement is required in small envelopes or under extreme conditions. Since the valve stem is precisely made it is ideally suited as measurement scale. The subsequently applied mechanical structure has no impact on normal valve operation. Valves are normally made of ferromagnetic material. Non-magnetic variants (e. g. titanium) can also be used as measurement scales, however, this requires some additional modifications. We would be glad to advise you on this. We offer even more... After a principal evaluation and definition of the points of measurement we offer different service packages for the integration of the sensors. These may vary depending on the specific measurement task. Service package I Advice regarding the design of the modification of the cylinder head. Service package II Mechanical machining of the valve guide (valve guides are provided by the customer). Service package III Mechancal machining of the cylinder head (normally done by the customer). Service package IV Integration of the sensors into the cylinder head at our plant in Lahnau. Service package V Processing of the valves for the measurement task.
5 Configuration & calibration VTM-System with installed measurement valves Measuring data acquisition of customer SPP-3001 sensor evaluation Analog output with calculated valve lift curve in real time Your Advantages. Fast realization of measurement projects by our experts. We are very experienced in the integration of sensors in difficult measurement environments. Each project is a new challenge and we are happy find a solution for this. Robust sensor technology. Our magnetic sensors are the key to success. They are extremely small and very robust under demanding operating conditions. Safe measurement results. A very modern and intelligent evaluation electronics transfers the magnetic effect of our sensors into precise real-time measurement results. Excellent performance very good price. Valve train measurement or valve rotation measurement belongs to the most demanding measurement tasks around fired combustion engines. The solution offered by Sensitec provides first-class results and has established itself also for reasons of cost a standard method for many engine design engineers working on the measurement in fired engines. Modular services. We offer you individual service packages for the sensor integration. You decide which tasks you will carry out on your own. We provide reliable service and advice any time.
6 Sensitec GmbH Georg-Ohm-Str Lahnau Germany Phone: Fax: May 2018 / Subject to technical changes. Source: Egorov Artem / shutterstock.com
VTMS. Valve Train Measurement Solution. Data sheet
The measurement solution includes a GMR, an amplifier and a processing unit, which can be controlled by a PC (via USB interface). The head GLM711AVx is intended for the use with passive scales with a pitch
More informationTooth Sensor Modules and Kits. GMR sensor modules for toothed structures.
Tooth Sensor Modules and Kits. GMR sensor modules for toothed structures. » Ideally suited for highly dynamic applications!» Machine tools Renewable energy Testing equipment Textile machines Product Family.
More informationTooth Sensor Modules and Kits. GMR sensor modules for toothed structures.
Tooth Sensor Modules and Kits. GMR sensor modules for toothed structures. GLM700 Family. GMR Tooth Sensor Modules for Length and Position Measurement. Module GLM tooth sensor modules offer new possibilities
More informationAA746. MagnetoResistive FreePitch Sensor. Data sheet
MagnetoResistive FreePitch Sensor The is an angular sensor based on the Anisotropic MagnetoResistive (AMR) effect. The sensor contains two Wheatstone bridges with common ground (GND) and supply pin (V
More informationGF705 MagnetoResistive Magnetic Field Sensor
The is a magnetic field sensor based on the multilayer Giant MagnetoResistive (GMR) effect. The Sensor contains a Wheatstone bridge with on-chip flux concentrators to improve the sensitivity. The sensor
More informationAA747. MagnetoResistive Angle Sensor. DAtA Sheet
DAtA Sheet The is an angular sensor based on the AnisotropicMagnetoResistive (AMR effect. The Sensor contains two galvanically separated Wheatstone bridges, at a relative angle of 45 to one another. A
More informationEBR7912EBI-CA-KA Incremental Sensor Module with Reference
The sensor module EBR7912EBI-CA contains an Anisotropic MagnetoResistive (AMR) FixPitch sensor AL796 with 2 mm magnetic pitch and a Giant MagnetoResistive (GMR) sensor GF705 for the reference signal. The
More informationGF708 MagnetoResistive Magnetic Field Sensor
The is a magnetic fi eld sensor based on the GiantMagnetoResistive (GMR) effect. Its functional magnetic layer is pinned within a synthetic spin-valve connected as a Wheatstone bridge. With its on-chip
More informationAA745A. MagnetoResistive FreePitch Sensor DATA SHEET
AA745A MagnetoResistive FreePitch Sensor DATA SHEET The AA745A is a position sensor based on the AnisotropicMagnetoResistive (AMR) effect. The sensor contains two Wheatstone bridges with common ground
More informationAL794 MagnetoResistive FixPitch Sensor (2.5 mm)
DATA SHEET The is an AnisotropicMagnetoResistive (AMR) position sensor with a high resistance for low power applications. The sensor contains two Wheatstone bridges shifted against each other. The output
More informationSensitec. Magnetoresistive Sensors >>made in Germany<<.
Sensitec. Magnetoresistive Sensors >>made in Germany
More informationAL780 MagnetoResistive FixPitch Sensor (5 mm)
The is an AnisotropicMagnetoResistive (AMR) position sensor. The sensor contains two Wheatstone bridges shifted against each other. The output signals are proportional to sine and cosine signals of the
More informationAL803 MagnetoResistive FixPitch Sensor (1 mm)
MagnetoResistive FixPitch Sensor (1 mm) The is an Anisotropic MagnetoResistive (AMR) position sensor. The sensor contains two Wheatstone bridges shifted against each other. The output signals are proportional
More informationAL796 MagnetoResistive FixPitch Sensor (2 mm)
The is an AnisotropicMagnetoResistive (AMR) position sensor. The sensor contains two Wheatstone bridges shifted against each other. The output signals are proportional to sine and cosine of the coordinate
More informationAL795 MagnetoResistive FixPitch Sensor (0.5 mm)
DATA SHEET The is an AnisotropicMagnetoResistive (AMR) position sensor. The sensor contains two Wheatstone bridges shifted against each other. The output signals are proportional to sine and cosine of
More informationAFF755B. MagnetoResistive Field Sensor. DAtA ShEEt
The is a low noise magnetic fi eld sensor based on the Anisotropic MagnetoResistive (AMR) effect. The sensor contains a Wheatstone bridge including a fl ip coil for offset correction. This measurement
More informationEBI7903CAx-DA-IF Incremental Sensor Module
The sensor module contains an AMR (Anisotropic MagnetoResistive) position sensor and a high resolution 13 bit interpolation-ic. The AL798 AMR sensor with PurePitch layout is designed for a magnetic scale
More informationAFF756. MagnetoResistive Field Sensor DATA SHEET
DATA SHEET The is a low noise magnetic fi eld sensor based on the Anisotropic- MagnetoResistive (AMR effect. The sensor contains a Wheatstone bridge including a fl ip coil for offset correction. This measurement
More informationEBx7811xBx-DA-UA.DSE.04
Incremental Sensor Module with optional Reference The sensor module EBx7811 contains a GMR (Giant MagnetoResistive) tooth sensor combined with a magnet and a high resolution 9 bit interpolation-ic. The
More informationGLM700ASB family. Tooth sensor module with integrated magnet DATA SHEET
The sensor modules of the GLM700ASB-Ax family are designed for use with assive measurement scales. The modules combine a GiantMagnetoResistive (GMR) tooth sensor with an integrated bias magnet in a comact
More informationEBI7904CAx-DA-IF Incremental FixPitch Sensor Module
The sensor module contains an AMR (Anisotropic MagnetoResistive) FixPitch sensor and a high resolution 13-bit interpolation-ic. The AL798 AMR FixPitch sensor with PurePitch technology is designed for a
More informationEBK7000. Evaluation Kit for Angle and Length Measurement with MagnetoResistive Sensor Technology EBK7000_PIE_01. Product Information.
for Angle and Length Measurement with MagnetoResistive Sensor Technology Page 1 of 16 Content 1. Safety Indication... 3 2. Content of the... 3 3. Measurement Configurations... 4 4. Composition... 5 4.1
More information10 Things to Consider when Acquiring a Nanopositioning System
10 Things to Consider when Acquiring a Nanopositioning System There are many factors to consider when looking for nanopositioning piezo stages. This article will help explain some items that are important
More informationCatalog of CLA force and torque sensors
Catalog of CLA force and torque sensors SC-002 LC-01 LC-10 TSF-000 TSF-05 TSF-1 TSF-100 Micro-force sensor Force sensor Micro-torque sensor Torque sensor Phone +41 32 421 44 90, Fax +41 32 421 44 91, ventes@cla.ch,
More informationLENORD GEL BAUER
GEL 2440 with square-wave output signals and internal interpolation LENORD +BAUER... automates motion. Technical information Version 2014-08 General The measuring system comprises a scanning unit MiniCODER
More informationGF708 MagnetoResistive Magnetic Field Sensor
The GF708 is a magnetic field sensor based on the Giant MagnetoResistive (GMR) effect. Its functional magnetic layer is pinned within a synthetic spin-valve connected as a Wheatstone bridge. With its on-chip
More informationThe Mobile CNC Measurement and 3D Scanning System. WENZEL ScanTec MobileScan3D
The Mobile CNC Measurement and 3D Scanning System WENZEL ScanTec MobileScan3D MobileScan3D What is it and how does it work? MobileScan3D is a truly mobile CNC laser scanning solution allowing fully automatic
More informationMeasuring Technology for Soft Magnetic Materials
Measuring Technology for Soft Magnetic Materials Benefit from the economic efficiency and short amortisation period of BROCKHAUS measuring and testing instruments for magnetic materials. Inline measuring
More informationA Novel Self Calibrating Pulsed Eddy Current Probe for Defect Detection in Pipework
Malaysia NDT Conference November 2015 A Novel Self Calibrating Pulsed Eddy Current Probe for Defect Detection in Pipework S.Majidnia,J.Rudlin, R.Nilavalan PEC Applications Corrosion under Insulation for
More informationCh 5 Hardware Components for Automation
Ch 5 Hardware Components for Automation Sections: 1. Sensors 2. Actuators 3. Analog-to-Digital Conversion 4. Digital-to-Analog Conversion 5. Input/Output Devices for Discrete Data Computer-Process Interface
More informationCMS3050 Highly Dynamic MagnetoResistive Current Sensor (I PN
Highly Dynamic MagnetoResistive Current Sensor (I PN Data ShEEt The CMS3000 current sensor family is designed for highly dynamic electronic measurement of DC, AC, pulsed and mixed currents with integrated
More informationLENORD. +BAUER... automates motion. MiniCoder GEL 2444K Speed and position sensor with metal housing and sin/cos output
MiniCoder GEL 2444K Speed and position sensor with metal housing and sin/cos output LENORD +BAUER... automates motion. Technical information Version 03.3 General The measuring unit comprises a sensor and
More informationHAL , 508, 509, HAL Hall Effect Sensor Family
MICRONAS INTERMETALL HAL1...6, 8, 9, HAL16...18 Hall Effect Sensor Family Edition April Feb. 4, 16, 1996 1999 61-36-1DS 61-48-1DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features
More informationPotentiostat/Galvanostat/Zero Resistance Ammeter
Potentiostat/Galvanostat/Zero Resistance Ammeter HIGHLIGHTS The Interface 1000 is a research grade Potentiostat/Galvanostat/ZRA for use in general electrochemistry applications. It is ideal for corrosion
More informationRotary position sensor with ohmic signal output or voltage output
Rotary position sensor with ohmic signal output or Measuring principle Operating temperature hange in resistance on the voltage divider, hall-effect Type R1: 50... 360 in 10 steps (linear acquisition angle)
More informationAL780 MagnetoResistive Length and Angle Sensor Data sheet
MagnetoResistive Length and Angle Sensor The AL780 is an Anisotropic Magneto Resistive (AMR) position sensor. The sensor contains two Wheatstone bridges shifted against each other. The output signals are
More informationINCLINED PLANE RIG LABORATORY USER GUIDE VERSION 1.3
INCLINED PLANE RIG LABORATORY USER GUIDE VERSION 1.3 Labshare 2011 Table of Contents 1 Introduction... 3 1.1 Remote Laboratories... 3 1.2 Inclined Plane - The Rig Apparatus... 3 1.2.1 Block Masses & Inclining
More informationLENORD. +BAUER... automates motion. GEL 2444K PG Configurable rotational speed and position sensor with operating hours counter
GEL 2444K PG Configurable rotational speed and position sensor with operating hours counter LENORD +BAUER... automates motion. Technical information Version 2015-03 General The measuring system comprises
More informationKEVA B Indoor voltage sensor
Medium Voltage Products KEVA B Indoor voltage sensor Parameters for Application Unit Value Rated primary voltage of application kv up to 24 Sensor Parameters Unit Value Rated primary voltage, U pn Highest
More informationLENORD. +BAUER... automates motion. GEL 2351 with current or voltage interface. Technical information Version General. Features.
GEL 2351 with current or voltage interface LENORD +BAUER... automates motion. Technical information Version 201-11 General Single turn absolute rotary encoder with a resolution of 16 bits Magneto-resistive
More information3D-magnetic field probes AS-U3D GEO-X for ±200 µt
3D-magnetic field probes AS-U3D GEO-X for ±200 µt measurement of X, Y, Z or Σ DC and AC field measurement measurement range: ±200 µt (2 G) high bandwidth: DC 500 Hz linearity error:
More informationAngle Encoder Modules
Angle Encoder Modules May 2015 Angle encoder modules Angle encoder modules from HEIDENHAIN are combinations of angle encoders and high-precision bearings that are optimally adjusted to each other. They
More informationMT32 Telemetry. KMT - Kraus Messtechnik GmbH. Multi channel telemetry system for rotating application. Powering (rotor) by battery or inductive
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com MT32 Telemetry Multi channel telemetry
More informationLV-Link 3.0 Software Interface for LabVIEW
LV-Link 3.0 Software Interface for LabVIEW LV-Link Software Interface for LabVIEW LV-Link is a library of VIs (Virtual Instruments) that enable LabVIEW programmers to access the data acquisition features
More informationMAGNETOSCAN MAGNETIC MEASURING SCANNER
LABORATORIO ELETTROFISICO MAGNETOSCAN MAGNETIC MEASURING SCANNER Fully automated ease with micrometrical accuracy A magnetic measuring scanner, the Magnetoscan is designed to measure the superficial magnetic
More informationCOMPRION Design Validation. Solution for Visualizing and Analyzing NFC Operating Volumes
COMPRION Design Validation Solution for Visualizing and Analyzing NFC Operating Volumes Measurement and Analysis of Contactless Interfaces with Design Validation Center The increasing availability of day-to-day
More informationCDS4025 MagnetoResistive Current Sensor (I PN
The CDS4000 current sensor family is designed for highly dynamic electronic measurement of DC, AC, pulsed and mixed currents with integrated galvanic isolation. The MagnetoResistive technology enables
More informationSinCosYzer 2 (OVERVIEW) Encoder Signal Analysis With Graphical Visualization
Rev B1, Page 1/5 FEATURES 8 differential input channels for ± 1 V to ± 10 V Fast simultaneous signal sampling up to 2 MS/s High ADC resolution of 30.5 µv at ± 1 V FS (16 bit) Base modes of operation: 8-channel
More informationCAPACITIVE SENSORS. Series KS. Key-Features:
CAPACITIVE SENSORS Series KS Key-Features: Content: Introduction Applications...2 Technical Data Sensor Heads...3 Technical Drawing...4 Sensor Cabels...5 1 Channel Electronics...6 Description Electronics
More informationRotary Encoder System Compact Model Range
we set the standards RIK Rotary Encoder System Compact Model Range 2 Incremental rotary encoder Features Compact design, consisting of scanning head with round cable, 15pin D-sub connector and grating
More informationInstruction manual for T3DS software. Tool for THz Time-Domain Spectroscopy. Release 4.0
Instruction manual for T3DS software Release 4.0 Table of contents 0. Setup... 3 1. Start-up... 5 2. Input parameters and delay line control... 6 3. Slow scan measurement... 8 4. Fast scan measurement...
More informationCMS2050 MagnetoResistive Current Sensor (I PN
The CMS2000 current sensor family is designed for highly dynamic electronic measurement of DC, AC, pulsed and mixed currents with integrated galvanic isolation. The MagnetoResistivetechnology enables an
More informationTechnical Datasheet UltraScope USB
Technical Datasheet UltraScope USB www.daselsistemas.com Revision INDEX 1 CHANNELS... 3 2 PULSER... 3 3 RECEIVER... 4 4 FILTERS... 4 5 TRIGGER MODES... 5 6 SIGNAL PROCESSING... 5 7 CONTROL SIGNALS... 6
More informationCMS2005 MagnetoResistive Current Sensor (I PN
The CMS2000 current sensor family is designed for highly dynamic electronic measurement of DC, AC, pulsed and mixed currents with integrated galvanic isolation. The MagnetoResistive technology enables
More informationn e w a c t i v e current sensors with primary conductor opening Advanced Materials The Key to Progress
n e w a c t i v e current sensors with primary conductor opening Advanced Materials The Key to Progress THE COMPANY VACUUMSCHMELZE VACUUMSCHMELZE GmbH & Co. KG (VAC) is one of the world s leading producers
More informationUsage of Magnetic Field Sensors for Low Frequency Eddy Current Testing
Usage of Magnetic Field Sensors for Low Frequency Eddy Current Testing O. Hesse 1, S. Pankratyev 2 1 IMG ggmbh, Nordhausen, Germany 2 Institute of Magnetism, National Academy of Sciences, Ukraine Keywords:
More informationIntroduction to NVE GMR Sensors
to NVE GMR Sensors Introduction In 1988, scientists discovered the Giant Magneto Resistive effect a large change in electrical resistance that occurs when thin stacked layers of ferromagnetic and nonmagnetic
More informationMore Precision. eddyncdt // Inductive sensors based on eddy currents
More Precision eddyncdt // Inductive sensors based on eddy currents 8 Compact eddy current measuring system eddyncdt 3005 - Compact and robust design - Temperature compensation up to 180 C - High precision
More informationAlphaProx inductive sensors. Measure distances accurate to a micrometer.
AlphaProx inductive sensors Measure distances accurate to a micrometer. AlphaProx sensors simply offer more AlphaProx by Baumer is a flexible platform for inductive distance-measuring sensors, with fully
More informationLinear Motion Servo Plants: IP01 or IP02. Linear Experiment #0: Integration with WinCon. IP01 and IP02. Student Handout
Linear Motion Servo Plants: IP01 or IP02 Linear Experiment #0: Integration with WinCon IP01 and IP02 Student Handout Table of Contents 1. Objectives...1 2. Prerequisites...1 3. References...1 4. Experimental
More informationCTP16-Rotate. KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP16-Rotate 16 channel telemetry
More informationSelf contained servo drive CLDP Technical data sheet
voith.com Self contained servo drive CLDP Technical data sheet Advantages + + High energy efficiency + + High dynamics + + Oil free power pack and piping are not necessary + + Sensors used provide the
More informationPosition Transmitter TGS 40 (RAM)
Operating Instructions 42/14-50 EN Position Transmitter TGS 40 (RAM) Position Transmitter TGS 40 (RAM) Operating Instructions Document no. 42/14-50 EN Date of issue: 05.2006 Revision: B Manufacturer: ABB
More informationCurrent consumption ma solenoid current consumption ( max 300 ma) Hz % V ma. Housing dimensions mm 120(d) x 99(h) x 23(w)
89 610/112 ED EWM-A-SV ANALOG AMPLIFIER CARD SERVOVALVE CONTROL RAIL MOUNTING TYPE: DIN EN 50022 OPERATING PRINCIPLE This card is designed for a dynamic control of servovalves with the current output controlled
More informationPerry DEHC Test Platform
Perry DEHC Test Platform 2017 Power Plant Simulation Conference San Diego, Ca January 16-19, 2017 Perry DEHC Test Platform John Stone Senior Engineer - CORYS Yves Lacombe Principal Engineer - CORYS This
More informationHAL621, HAL629 Hall Effect Sensor Family MICRONAS. Edition Feb. 3, DS MICRONAS
MICRONAS HAL61, HAL69 Hall Effect Sensor Family Edition Feb., 651-54-1DS MICRONAS Contents Page Section Title 1. Introduction 1.1. Features 1.. Family Overview 4 1.. Marking Code 4 1.4. Operating Junction
More informationPROJECTILE-BORNE INSTRUMENTATION FOR CHARACTERIZATION OF IN-BORE ENVIRONMENTS. Philip J. Peregino II, Ed Bukowski ABSTRACT
23 RD INTERNATIONAL SYMPOSIUM ON BALLISTICS TARRAGONA, SPAIN 16-20 APRIL 2007 PROJECTILE-BORNE INSTRUMENTATION FOR CHARACTERIZATION OF IN-BORE ENVIRONMENTS U.S. Army Research Laboratory AMRSD-ARL-WM-BA
More informationMore Precision. mainsensor // Magneto-inductive displacement sensors
More Precision mainsensor // Magneto-inductive displacement sensors 2 Magneto-inductive sensors for non-contact linear displacement measurement mainsensor - Selectable measuring ranges up to 55mm - Linear
More informationUsers Group Conference 2018
Users Group Conference 2018 Magnetic Pickup Verification Rocky Auterson Equipment Analyst, Windrock, Inc. 1 Magnetic Pickup Verification Setup and verification of signal strength 2 Magnetic Pickup Verification
More informationR30D RVDTs DC-Operated Rotary Variable Differential Transformers
R30D RVDTs DC-Operated Rotary Variable Differential Transformers RVDTs incorporate a proprietary noncontact design that dramatically improves long term reliability when compared to other traditional rotary
More informationTORQUE SENSOR AND FORCE SENSOR
TORQUE SENSOR AND FORCE SENSOR The A3 - ULC is designed to fulfill a wide range of customer specific application requirements. The A3 - ULC can be easily mounted to a customer designed sensor holder. To
More informationA high sensitivity analog and digital position sensor for the detection of ferromagnetic target in automotive applications Didier FRACHON 1, 1 Moving Magnet Technologies SA 1, rue Christiaan Huygens, 5000
More informationCompact Nanopositioning System Family with Long Travel Ranges
P-620.1 P-629.1 PIHera Piezo Linear Stage Compact Nanopositioning System Family with Long Travel Ranges Physik Instrumente (PI) GmbH & Co. KG 2008. Subject to change without notice. All data are superseded
More informationHAL , 508, 509, HAL , 523 Hall Effect Sensor Family MICRONAS. Edition Feb. 14, E DS
MICRONAS HAL1...6, 8, 9, HAL16...19, 23 Hall Effect Sensor Family Edition Feb. 14, 21 621-19-4E 621-48-2DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features 3 1.2. Family Overview
More informationHAL , 508, 509, HAL , 523 Hall Effect Sensor Family
Hardware Documentation Data Sheet HAL 1...6, 8, 9, HAL 16...19, 23 Hall Effect Sensor Family Edition Nov. 27, 23 621-48-4DS HALxx DATA SHEET Contents Page Section Title 3 1. Introduction 3 1.1. Features
More informationCoupling/Decoupling Networks (CDN)
Coupling/Decoupling Networks (CDN) For immunity testing according to IEC / EN 61000-4-6 Immunity testing CDNs are the preferred coupling and decoupling devices, for reasons of test reproducibility and
More informationLENORD. MiniCODER plus GEL 2449 Configurable rotational speed and position sensor with operating hours counter. +BAUER... automates motion.
MiniCODER plus GE 2449 Configurable rotational speed and position sensor with operating hours counter ENORD +BAUER... automates motion. Technical information Issued 2017-05 General The measuring system
More informationScalable linear magneto resistive sensor arrays
Summary Scalable linear magneto resistive sensor arrays Andreas Voss, Axel Bartos TE Sensor Solutions, MEAS Deutschland GmbH, 447 Dortmund, Germany Andreas.Voss@te.com 031-9740 560 The advancing digitalization
More informationMagnetic Levitation System
Introduction Magnetic Levitation System There are two experiments in this lab. The first experiment studies system nonlinear characteristics, and the second experiment studies system dynamic characteristics
More informationVMS 830. Vibro-Meter Vibration Monitor FEATURES GENERAL. Absolute vibration measurement. Monitoring of machines and industrial plants
Vibro-Meter Vibration Monitor FEATURES Absolute vibration measurement Monitoring of machines and industrial plants Suitable for velocity transducers (CV...) and piezoelectric accelerometers (CA... / CE...)
More informationTechnical Manual Modulation Box
Technical Manual Modulation Box Schwank GmbH - Bremerhavener Str. 43-50735 Cologne, Germany Tel: +49 (0)221-7176-0 Fax: +49 (0)221-7176-288 E-mail: info@schwank.de Internet: www.schwank.de Subject to technical
More informationpenstocks.de penstocks.de GmbH Planning and realising of penstocks a member of the IBS Group
penstocks.de Planning and realising of penstocks penstocks.de GmbH a member of the IBS Group Being an internationally active company with headquarters in southern Germany we supply many satisfied customers
More informationThe new dimension in torque measurement
Digital torque measurement system The new dimension in torque measurement T12 The digital measurement system Torque Rotational speed Power smarttorque T12 The complete torque in a single transducer SIEMENS
More informationKMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP8-Rotate 8 (4) channel telemetry
More informationStepping Motor Station
Stepping Motor Station PV-7300 System A single system can measure all seven of the characteristics important in a stepping motor, namely the -T characteristic, holding torque, detent torque, pull-in torque,
More informationBridge Measurement Systems
Section 5 Outline Introduction to Bridge Sensors Circuits for Bridge Sensors A real design: the ADS1232REF The ADS1232REF Firmware This presentation gives an overview of data acquisition for bridge sensors.
More informationTemposonics. Magnetostrictive Linear Position Sensors. ER IO-Link Data Sheet
Temposonics Magnetostrictive Linear Position Sensors ER IO-Link Compact sensor model Operating temperature up to +75 C (+167 F) Ideal for flexible mounting MEASURING TECHNOLOGY The absolute, linear position
More informationOPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE TEC-B-01M VOLTAGE CLAMP MODULE FOR EPMS SYSTEMS. VERSION 1.2 npi 2014
OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE TEC-B-01M VOLTAGE CLAMP MODULE FOR EPMS SYSTEMS VERSION 1.2 npi 2014 npi electronic GmbH, Bauhofring 16, D-71732 Tamm, Germany Phone +49 (0)7141-9730230;
More informationWSE22 - Magnetic shaft encoder
WSE22 - Magnetic shaft encoder Based on Dipole Magnet and Hall Sensors WSE22 is a magnetic rotary enclosed encoder with a shaft. It has a precision sensor having an integrated Hall element for scanning
More informationServo Amplifier 4-Quadrant PWM for Brushless DC-Servomotors
Servo Amplifier -Quadrant PWM for Brushless DC-Servomotors Series BLD 010 Operating Instructions Index Chapter 1. Description 2. Illustration 3. Specification. Dimensions. Safety notes.1 Skilled personnel.2
More information3D Magnetic Sensor for Angle Measurements
Application Note 3D Magnetic Sensor for Angle Measurements TLE493D-W2B6, TLE493D-A2B6, TLI493D-A2B6 About this document Scope and purpose This application note gives detailed information about how Infineon's
More informationA Turnkey Weld Inspection Solution Combining PAUT & TOFD
A Turnkey Weld Inspection Solution Combining PAUT & TOFD INTRODUCTION With the recent evolutions of the codes & standards, the replacement of conventional film radiography with advanced ultrasonic testing
More informationPulse Timing and Latency Measurements Using Wideband Video Detectors
Pulse Timing and Latency Measurements Using Wideband Video Detectors LadyBug Technologies 3317 Chanate Rd. Suite 2F Santa Rosa, CA 95404 ladybug-tech.com 1-866-789-7111 An efficient, accurate, and cost-effective
More informationLENORD. +BAUER... automates motion. GEL 295x Customer-specific precision encoder. Technical Information Version General information.
GEL 95x Customer-specific precision encoder LENORD +BAUER... automates motion. Technical Information Version 04- General information Extremly robust rotary encoder with stainless steel housing for measuring
More informationPrinciples of operation 5
Principles of operation 5 The following section explains the fundamental principles upon which Solartron Metrology s linear measurement products are based. > Inductive technology (gauging and displacement)
More informationPiezomechanik GmbH. PosiCon.an for piezoactuators (low voltage and high voltage actuators) Position Feedback control electronics
Piezomechanik GmbH Position Feedback control electronics PosiCon.an for piezoactuators (low voltage and high voltage actuators) Above: PosiCon 150/3 with actuator PSt 150/14/20 VS 20, option: position
More informationTETRIS 1000 High Impedance Active Probe. Instruction Manual
TETRIS 1000 High Impedance Active Probe Instruction Manual Copyright 2015 PMK GmbH All rights reserved. Information in this publication supersedes that in all previously published material. Specifications
More informationMagnetic Microand Nanotechnology for Robust Sensor Solutions.
Magnetic Microand Nanotechnology for Robust Sensor Solutions. Welcome to the Sensor Cosmos. Curiosity on Mars. Sensitec on board. 2 Highlights Highlights NEW in 2016! Valve Lift Measurement System Sensitec
More informationPage ENSC387 - Introduction to Electro-Mechanical Sensors and Actuators: Simon Fraser University Engineering Science
Motor Driver and Feedback Control: The feedback control system of a dc motor typically consists of a microcontroller, which provides drive commands (rotation and direction) to the driver. The driver is
More informationApplication Information
Application Information Impact of Magnetic Relative Permeability of Ferromagnetic Target on Back-Biased Sensor Output By Yannick Vuillermet, Allegro MicroSystems Europe Ltd Introduction the material versus
More information