Burnishing Tools. Internal Diameter Burnishing Tool. Technical Description
|
|
|
- Corey Oliver
- 5 years ago
- Views:
Transcription
1 Technical Description s Internal Diameter Bright Multi roller ID burnishing tools are available for through & blind bores. Component having ID 5mm and above can be burnished. Though the tools have standard burnishing length the same can be redesigned according to the customers requirement. On request the tools can be supplied with self-feed design. ID Tool Through v Adjustable Tool diameter within a range v Superior dimensional consistency after burnishing v Mirror surface finish in the bores after burnishing v Single pass operation v Quick return on investment v High productivity ID Blind Bore Blind Bore ID Tool (Small Dia) Tools are available in three types Series Dia Burnishing Length SH 5mm-68mm Upto 60 mm LG 5mm-68mm 60mm & above UNL 68mm & above Any Length Tools For Thru & Blind Bore Through Bore ID tool (Self feed Design) Through Bore ID Tool (Large Dia) Series ID Dia Bore Type BL Burnishing Length Thru Bore/Blind Bore Internal Diameter-Size(mm) SH/LG/UNL - Series Rocker Arm Connecting Rod Engine Casing Copyright Bright s 2004 Cat: BBT Bright s Private Limited, Coimbatore , India
2 Multi Roller Tools Outer Diameter Technical Description Bright multi roller OD burnishing tools are available for plain & stepped shafts. Tools available for component OD 2mm and above. For Plain shaft tools can be supplied with hollow shank so that shaft length greater than tool length can also be burnished. Outer Diameter v Available from 2mm and above v Adjustable Tool diameter within a range v Superior dimensional consistency after burnishing v Mirror surface finish in the shafts after burnishing v Single pass operation v Quick return on investment v High productivity OD Stepped Shaft Series OD Dia EXT- Series Bore Type BL Burnishing Length Plain/ Stepped Shaft Outer Diameter-Size(mm) Tools For Plain & Stepped Shaft Large Outer Diameter Precision Turned Components Copyright Bright s 2004 Cat: BBT Bright s Private Limited, Coimbatore , India
3 Multi Roller Tools Internal and External Taper Technical Description Internal and External Tapers can be burnished with Bright taper burnishing tools. These tools can be supplied in any angles according to the component design. These tools are used to achieve good blue matching between mating parts. ID Taper Tool v Available from minor diameter 5mm and above v Highly suitable for matching tapers v Maximum blue matching after burnishing v Tools available in required taper angles v Highly suitable for high pressure applications Internal Taper Tool OD Taper Tool TBT Type MJD MND Angle TL Taper Length Taper Angle Minor Diameter(mm) Major Diameter (mm) Internal / External Taper TBT - Series Tools for Internal & External Tapers External Taper Tool High Pressure Hydraulic End Fittings Copyright Bright s 2004 Cat: BBT Bright s Private Limited, Coimbatore , India
4 Multi Roller Tools Flat Circular Face Technical Description Flat circular faces can be burnished with Bright face burnishing tools. A minimum relief of 5mm in the center of the component is required for effective functioning of the tool. v Available for flat circular face with center relief greater than 5mm v Mirror surface finish in flat circular faces v Ideal for face matching application vsingle pass operation v Quick return on investment v High productivity Flat Circular Face Face Tools For Flat Circular Faces Series Size OD Relief Relief at centre (mm) Outer Diameter-Size(mm) FBT- Series Face Burnished Components Copyright Bright s 2004 Cat: BBT Bright s Private Limited, Coimbatore , India
5 Multi Roller Special Tools Bright special burnishing tools are made to customer specific requirements. Special profile tools can be designed according to customer specification. Some of the special tools which are designed are listed below for your reference. Bright Internal Diameter Burnishing Tool having Extra Burnishing Length ID Tool Thru Bore Bright Large Face Face Bright Face and Internal Diameter Tool Kindly send us a part drawing or detailed hand sketch and request a quotation. Combined ID and Face Burnishing Bright Combined Bore Tool ID Tool Blind Bore Copyright Bright s 2004 Cat: BBT Bright s Private Limited, Coimbatore , India
6 Multi Roller Special Tools Bright Internal Ball Race Tool 1 ID Taper Tool Thru Bore Bright External Ball Race Tool 2 Ball Race OD Profile Burnishing Bright Spherical Convex Profile Concave Profile Convex Profile Burnishing Concave Profile Burnishing Bright Large Outer Diameter OD Tool Stepped Shaft Bright Multi-ball Special Copyright Bright s 2004 Cat: BBT Bright s Private Limited, Coimbatore , India
Products. Multi Roller Burnishing Tools. Outer Diameter Burnishing Tools 4.2. Taper Burnishing Tools 4.3. Face Burnishing Tools 4.
Contents Introduction 1 Quality 2 About Burnishing and Advantages 3 Products Multi Roller Burnishing Tools Internal Diameter Burnishing Tools 4.1 Outer Diameter Burnishing Tools 4.2 Taper Burnishing Tools
Burnishing. Burnishing TOOLS & MACHINES SIZE, FINISH & WORK HARDEN FEATURING COMPLETE TOOL AND SPARE PART NUMBERS
Burnishing Burnishing TOOLS & MACHINES SIZE, FINISH & WORK HARDEN FEATURING COMPLETE TOOL AND SPARE PART NUMBERS T H E L E A D E R I N H O L E F I N I S H I N G S O L U T I O N S FOR THE WORLDWIDE MACHINE
Roller Burnishing Tools
Roller Burnishing Tools The company DREX -TOOLS has since 1980 a great experience in the fields of the burnishing. The company, with the support of technical assistance with big experience has created
YAMATO. ROBUTO Roller Burnishing Tools. Mirror Like Surface Finishes In One Pass...
ROBUTO Roller Burnishing Tools Mirror Like Surface Finishes In One Pass... ROBUTO THE ART OF ROLLER BURNISHING / EFFECTS - ADVANTAGES... 5 INTERNAL ROBUTO (ID) Ø 5-3 mm... 3 Ø Ø 32-85 mm... 5 86-200 mm...
These thickness gauges are especially handy for measuring thickness of small
Thickness s mm type These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material. The objects to be measured is clamped
Investment Casting Design Parameters Guide for Buyer
Investment Casting Design Parameters Guide for Buyer The following guidelines and technical information outline what an investment casting is capable of offering. It will cover dimensional and structural
ROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
How To Use This Catalog
How To Use This Catalog Welcome To RSVP Circular Chasers Axial Radial Specialty Tools Welcome To The RSVP Tooling Interactive Catalog Section Clickable & Touch Links Within each page we have included a
LAKSHMI MACHINE WORKS LIMITED COIMBATORE , INDIA
Spare Parts Catalogue for Vario Clean LB9/2 Issue No. : 02 Month / Year : February 2016 Control No. : 63 194 10 00 Revision Date : Spinning System This Catalogue Belongs to the Mill : Order No. : Machine
1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
Prefabricated curves for drywall installations
Prefabricated curves for drywall installations The simplest and fastest way to produce smooth curves in drywall. Prefabricated curves in any, shape or size Simple Installation is exactly like drywall.
Torque Specs - Main Caps 1-5 1/2" bolts 100 ft lbs W / CMD# /2" splayed 100 ft lbs Dart s inner head studs 3/8" 7/16" stepped 50 ft lbs
DART MARK IV Iron Big Block - Technical Notes Deck Height... 9.800" & 10.200" Bore... 4.250", 4.500", 4.560" and 4.600" unfinished Main Bearing Size... Standard BBC Main Caps... All 4 bolt - Steel or Ductile
28 ROLL-A-FINISH TOOL SELECTION AND ORDERING 36 CX EXTERNAL ROLLER BURNISHING MACHINES. 46 Universal TM Burnishing Tools
Burnishing contents 2 OVERVIEW OF ROLLER BURNISHING 6 INTERNAL ROLLER BURNISHING TOOLS 6 SR Series Roll-a-Finish Tools 12 R Series Roll-a-Finish Tools 17 U Series Roll-a-Finish Tools 19 Bearingizing Tools
Comparative Measuring Instruments
Comparative Measuring Instruments F-1 TESA YA Internal Measuring Instruments Specially designed for small bores from 0,47 up to 12,20 Determine dimensions as well as form and shape deviations through 2-point
Metallic Bearings. Oiles 500SP1 P.181 Oiles 500SP5 P.206. Oiles 500SPR P.207 Oiles 500HP P.209 Oiles 500B P.213
Metallic Bearings Oiles 500SP1 P.181 Oiles 500SP4 P.205 Oiles 500SP5 P.206 Oiles 500SPR P.207 Oiles 500HP P.209 Oiles 500AB P.211 Oiles 500B P.213 Oiles 500F P.217 Oiles 500 Spherical Bearings P.223 Oiles
GMS SERIES. Maximum Performance Multi-axis Turning Centers
GMS SERIES Maximum Performance Multi-axis Turning Centers MAXIMUM PERFORMANCE MULTI-AXIS TURNING CENTERS With 30 years of knowledge and experience in the machine tools field, Goodway is proud to present
CNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia
ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia You can do lapping of 2 valves of different size in this range. Operative Range:
CONTINUOUS SAMPLING SYSTEMS
For over 0 years, Mobile s OVERSHOT WIRELINE CONTINUOUS SAMPLING SYSTEM has been recognized as the leading method for obtaining continuous samples while drilling in cohesive soils - fast, effective, hollow
DUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines.
DUGARD Machine Tools Since 1939 Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines www.dugard.com Dugard HBM-4 Horizontal Borer Rotary Table Spindle (BT) Gear Box ATC 60 Tools (OPT) Heavy Loading capacity
Multi-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
Technical Data. 17. Technical data Deep groove ball bearing radial internal clearances and axial internal clearances A
7. Technical data 7. Deep groove ball bearing radial internal clearances and axial internal clearances........8 68 68 68 68 68 68....8 6 6 6 6 6 6.6.......6...... Fig. 7.. Series 68 radial internal/axial
1 new Cincinnati Hydraguide tracer lathes
1 new Cincinnati Hydraguide tracer lathes new C incinnati 15 and 18 H ydraguide accurate I versatile / econom ical The Cincinnati Hydraguide tracer lathe automatically, accurately and economically turns
Workshop Solutions PULLERS & SEPARATORS.
Workshop Solutions PULLERS & SEPARATORS Churchbridge Works - Walsall Road, Cannock, Staffordshire, UK. WS11 8JR Tel: +44 (0) 1922 702222 Fax: +44 (0) 1922 702223 E-mail: sales@sykes-pickavant.com SP07/01-PULLER
CNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
BETEX MECHANICAL PULLERS. BETEX MSP 2/3-arm pullers, self-centering. Safe and easy dismounting of bearings, couplings, rings etc.
BETEX MSP 2/3-arm pullers, self-centering Safe and easy dismounting of bearings, couplings, rings etc. Ergonomic design, easily operated by one person! Practical! Self centering 2 or 3-arm puller with
Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
Typical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
HICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE
M-6 CORE BORE DRILLING MACHINE PARTS LIST. September 18, Part #
M-6 CORE BORE DRILLING MACHINE PARTS LIST September 8, 0 Part # 8008 Proposition 6 State of California Warning! Engine exhaust and some its constituents are known to the State of California to cause cancer,
COGSDILL TOOL PRODUCTS, INC. Precision Tools FOR THE METALWORKING INDUSTRY. CogsdillTool PRODUCT INFORMATION. cogsdill.com CATALOGS. online.
CogsdillTool COGSDILL TOOL PRODUCTS, INC. Precision Tools view our CATALOGS online FOR THE METALWORKING INDUSTRY PRODUCT INFORMATION cogsdill.com Cogsdill E N G I N E E R E D S P E C I A L T Y T O O L
Within the product group Rapid-Line, Jongen Werkzeugtechnik GmbH produces special milling tools and inserts as well as special solid-carbide cutters.
Jongen Rapid-Line Special Tools Within the product group Rapid-Line, Jongen Werkzeugtechnik GmbH produces special milling tools and inserts as well as special solid-carbide cutters. Jongen s engineering
Precision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
Optics Practice. Version #: 0. Name: Date: 07/01/2010
Optics Practice Date: 07/01/2010 Version #: 0 Name: 1. Which of the following diagrams show a real image? a) b) c) d) e) i, ii, iii, and iv i and ii i and iv ii and iv ii, iii and iv 2. A real image is
IN-DIE TAPPING TOOLS TECHNICAL INFORMATION MANUAL
IN-DIE TAPPING TOOLS TECHNICAL INFORMATION MANUAL CALL TOLL FREE: 1-800-243-2659 FAX: 1-800-833-2659 2004 Danly IEM, A Division of Connell Limited Partnership THIS MANUAL CONTAINS INFORMATION APPLICABLE
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HS4N SLICER ML-136338 HS4N A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43311 (August 2015) F-43311 (August 2015) - 2 - HOBART 2015 Table of Contents
No September, Char-Lynn. Power Steering. Repair Information. 20 Series Steering Control Unit 001
Char-Lynn Power Steering No. 7-313 September, 1997 Repair Information 20 Series Steering Control Unit 001 Bearing Race Retaining Ring Needle Thrust Bearing Bearing Race Seal Ring Backup Washer Seal (3
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
Optical Measurement P-1
Optical Measurement P-1 FAST ROUND PART INSPECTION The whole TESA-Scan product line belongs to the range of dedicated non-contact opto-electronic measuring centres that provide Users with a complete solution
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st
Punching 3/16" diameter round hole in up to 3/16" thick (flat strip metal).
Wrought Iron Handicrafts, Inc. 3950 10 th Ave NW Rochester MN 55901-1336 507-289-0836 phone 800-456-7738 phone info@metalcraftusa.com email The ultimate dream machine for fabricators and ornamental metal
0.20. Record Page 1 of 19
Page 1 of 19 Page 2 of 19 Page 3 of 19 Page 4 of 19 Page 5 of 19 ASME BPVC.III.1.ND-2015 Page 6 of 19 ð15þ Figure ND-3325-1 Some Acceptable Types of Unstayed Flat Heads and Covers GENERAL NOTE: The illustrations
00238 R4 BODY, BOLT ON TORQUE TUBE PRODUCT LINE: 916/18 DATE: 12/4/06
0 0 SH CAP SCREW, /-0 NC X / G PLAIN 00 NUT, NYLOCK, /-0 NC ZINC 00 HH CAP SCREW, /- NC X G ZINC 0 O-RING, -N0, -/ OD X / SECTION 00 WHEEL DRIVE MOTOR WITH KEY 0 00 GEAR, WHEEL DRIVE MOTOR 0 WASHER, /
MK-5009T ELECTRIC BLOCK SAW PARTS MANUAL
www.mkdiamond.com MK-00T ELECTRIC BLOCK SAW PARTS MANUAL MODELS P/N MK-00T Block Saw -Phase 0Hz/0V 0 MK-00T Block Saw -Phase 0Hz/0V 07 Revision 00 0.0 Manual Part# 7 Caution: Read all safety and operating
MANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
MACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
Wettstein Tool TECHNOLOGIES. Milling Accessories. No. A C Air Collet Fixture. Manufacturers of Specialty TECHNOLOGIES INC.
Wettstein Tool Milling Accessories No. A1 212 5C Air Collet Fixture For use with standard Hardinge 5C Collets. Designed especially for high production applications. Their light weight and compact size
Comparative Measurement
Comparative Measurement H-1 TESA YA Bore Gauges TESA YA Complete Instrument SETS Specially designed for small bores from 0,47 up to 12,20 - Checking of dimension and bore form errors through 2-point measuring
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
ME 333 MANUFACTURING PROCESSES-II SPECIAL PURPOSE METAL FORMING PROCESSES
ME 333 MANUFACTURING PROCESSES-II SPECIAL PURPOSE METAL FORMING PROCESSES Shape Rolling Steps in the shape rolling of an I-beam part. Various other structural sections, such as channels and rails, also
DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is
The Author. 1 st Edition 2008 Self-published by Frenco GmbH
The Author Graduate Engineer (Dipl. Ing., FH) Rudolf Och was born in Bamberg, Germany in 1951. After graduating in mechanical engineering he founded FRENCO GmbH in Nuremberg, Germany in 1978. In the beginning,
Complete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
Specifications. Engine Dimensions. Dimensions in millimeters. Inch equivalents shown in [] Rev. -- 5KohlerEn
![Specifications. Engine Dimensions. Dimensions in millimeters. Inch equivalents shown in [] Rev. -- 5KohlerEn](/thumbs/86/94602263.jpg "Specifications. Engine Dimensions. Dimensions in millimeters. Inch equivalents shown in [] Rev. -- 5KohlerEn")
Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. 24 690 0 Rev. -- 5KohlerEn ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation and serial)
CARIBBEAN EXAMINATIONS SECONDARY EDUCATION CERTIFICATE EXAMINATION MECHANICAL ENGINEERING TECHNOLOGY. Paper 02 - Technical Proficiency.
FORM TP 2011094 CARIBBEAN EXAMINATIONS SECONDARY EDUCATION CERTIFICATE EXAMINATION TEST CODE 01335020 COUNCIL MECHANICAL ENGINEERING TECHNOLOGY Paper 02 - Technical Proficiency 2'h hours MAY/JUNE 2011
INDUSTRY SOLUTIONS GEARS. Clamping solutions»gearing up for Precision«
INDUSTRY SOLUTIONS GEARS Clamping solutions»gearing up for Precision«www.hainbuch.com POWER YOU TRUST RELIABILITY YOU NEED The gear industry s go-to source for gear workholding The grinding and gear cutting
Axial Movement. Tailstock 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC CHUCKING SYSTEM EXTRA WIDE Z AXIS DESIGN OF 620MM
STANDARD FEATURES FANUC TXP-100FA CONTROL Spindle Features Body Structure POWERFUL 49 HP SPINDLE MOTOR RIGID 45 DEGREE SLANT BED 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC
.01 undercut. Ø.187 locating dowel hole (Ø.1875 x.50 pin included)
Mold Components 1 SPRUE BUSHINGS Made of AISI 6150 material; precision ground; polished I.D. Hardened to Rc 46-50 Dowel pin hole in head for locating (pin included) Radius under head with undercut to reduce
WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
" Tiller Attachment (1993) Page 1 of 5 Chain Case Assembly
190-766-190 38" (1993) Page 1 of 5 Chain Case Assembly 190-766-190 38" (1993) Page 2 of 5 Chain Case Assembly 04991 1 Chain Case Assembly 1 05034 1 S Bearing Housing 1.375" Dia. 2 14895 1 S Housing Assembly
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions
Torque Specs - Main Caps 1-5 1/2" bolts 100 ft lbs W / CMD# /2" splayed 100 ft lbs Dart s inner head studs 3/8" 7/16" stepped 50 ft lbs
DART GEN V Iron Big Block - Technical Notes Deck Height... 9.800" & 10.200" Bore... 4.250" Option (4.500, 4.560 and 4.600) unfinished Main Bearing Size... Standard BBC Main Caps... All 4 bolt - Steel or
VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip
www. BAND-IT-IDEX.com
Operating Instructions Warning: Always wear safety glasses when operating hand tool. Instructions: 1. Tool is designed to accept.180" and.310" wide coated and uncoated ties. 2. Turn tension adjustment
ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
Manufacturer & Exporter of: Tube Cleaning Equipments such as Flexible Shafts, Brushes, Cutters, Tube Expanders, Construction Equipments Concrete
Manufacturer & Exporter of: Cleaning Equipments such as Flexible Shafts, Brushes, Cutters, Expanders, Construction Equipments Concrete Vibrators, Flexible shaft Grinders & Accessories. SERRATING / GROOVING
20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered
20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3
Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
Activity 7.3 Tolerances
Page 1 of 9 Activity 7.3 Tolerances Introduction The term variation describes the degree to which an object or idea differs from others of the same type or from a standard. Examples of variation are everywhere
UNIT 9b: SCREW FASTENERS Introduction Functions Screw Features Elements Terms of a Thread Profile
UNIT 9b: SCREW FASTENERS Introduction A mechanical screw is a cylinder or cone that has a helical ridge called a thread. A helix has one or more turns, so a screw can have several turns. If the helix is
Mechanical Drawing. Fig 5-1
College of Engineering 1 Mechanical Drawing Mechanical Engineering Department Mechanical Drawing Lecture 5 Keys and keyways 5-1 Introduction A key, Fig. 5.1, is usually made from steel and is inserted
NORTH AMERICA ONLY GUIDELINES FOR DIES WITH PIERCING OPERATIONS
GUIDELINES FOR DIES WITH PIERCING OPERATIONS 1.0 APPLICATION OF THE STANDARD THE FOLLOWING GUIDELINES APPLY TO ALL DIES WITH PIERCING OPERATIONS, E.G. BLANK, TRIM, PIERCE AND CAM DIES. 2.0 GENERAL INFORMATION
Allen & Allen Company
Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two
ROOP LAL Unit-6 (Milling) Mechanical Engineering Department
Notes: Milling Basic Mechanical Engineering (Part B, Unit - I) 1 Introduction: Milling is a machining process which is performed with a rotary cutter with several cutting edges arranged on the periphery
Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
A Quick-Change Gearbox For The 7x Minilathe
A Quick-Change Gearbox For The 7x Minilathe Richard Hagenbuch 10 August 2002 This article describes how to a build a quick-change gearbox for your 7X minilathe. I'll describe one that I built as a prototype
MN Modelling Objects and Creating Manufacturing Strategy
Abstract This document and the accompanying files describe the process of modelling a bell housing jig using the 3D software Catia V5. The manufacturing process by which the bell housing would be created
NORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES
"B" B. C. PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES PVC - DWV PIPE FITTINGS FOR "X" SOC. HD. SCREW (N) HOLES "D" "C" "A" O.D. ALTER IF CONSTRAINED BY SPACE LIMITATION. (2) MIN. FASTENING HOLES REQUIRED.
Roller assembly (actual size)
Roller assembly (actual size) 7 3.5 of 0.5 deg slope 3.5 of 0.5 deg slope 1.929 for PVC 1.950 for Aluminum 0.030 radial reduction 2.2 approx OD 6.5 11.875 Roller assembly consists of: a. 5/16 x 11.875
MINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
Objectives. Inventor Part Modeling MA 23-1 Presented by Tom Short, P.E. Munro & Associates, Inc
Objectives Inventor Part Modeling MA 23-1 Presented by Tom Short, P.E. Munro & Associates, Inc To demonstrate most of the sketch tools and part features in : Inventor Release 6 And, to show logical techniques
ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER
ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER Time : 3 Hrs Max. Marks : 70 The weightage of the distribution of marks over different contents of the question paper shall be as follows:
Arc Radius Measuring Gauge
Arc Radius Measuring Gauge Inverted Measuring Gauge Optical Flats Dial Center Finder Bore Gauge Checkmaster Optical Parallel Flats For checking the parallelism & flatness of seals, mating and gages surface.
Ralphs-Pugh Co. I didn t know you did all that!
Ralphs-Pugh Co. I didn t know you did all that! Ralphs-Pugh Co. The Ralphs-Pugh Company has been keeping industry on the move for over 50 years. We are an innovative supplier that distinguishes itself
Parts List & Diagram. Ezcreaser. Martin Yale Industries, LLC. 251 Wedcor Avenue, Wabash, Indiana Fax:
Parts List & Diagram r Martin Yale Industries, LLC. 5 Wedcor Avenue, Wabash, Indiana 699 60-56-06 Fax: 60-56- www.martinyale.com Parts Breakdown Table - NON-OPERATOR SIDE FRAME - OPERATOR SIDE FRAME -
Features. Continuous Duty Cycle Actuators
Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed
Back-Spotfacing. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing. & Chamfering TOOLS
COGSDILL TOOL PRODUCTS, INC. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing & Chamfering TOOLS Back-Spotfacing Available from stock for
CADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
Bio-Sand Filtration Mould Construction Guidelines
Bio-Sand Filtration Mould Construction Guidelines Adriaan Mol & Eric Fewster BioSandFilter.org December 19, 2007 Introduction On the following pages, you will find an illustrated construction guide that
Kerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
Catalogue guide. MARIO PINTO SPA Strada delle Cacce Torino page 1 di 13
Catalogue guide MARIO PINTO SPA Strada delle Cacce 21-10135 Torino www.live-tooling.com www.mariopinto.it page 1 di 13 PRODUCTS MANUFACTURING PHILOSOPHY Our Live Tools are entirely developed, designed
TW-400HV Combination Universal Horizontal / Vertical Machining Center
TW-400HV Combination Universal Horizontal / Vertical Machining Center www.topwell.com.tw TW-400HV Combination Universal Horizontal / Vertical Machining Center NEW CENTURY NEW THINKING NEW GENERATION 1