COMMERCIAL AND SELF-STORAGE DOORS
|
|
- Donna Glenn
- 5 years ago
- Views:
Transcription
1 COMMERCIAL AND SELF-STORAGE DOORS
2 The Power of INNOVATION Since 1990, DBCI continues in its role as a leading manufacturer and marketer of commercial-grade steel curtain roll-up doors for both the commercial and self-storage markets. We provide our customers with quality products, distinguished service and competitive pricing. DBCI employs the most skilled sales professionals and production personnel in the industry to ensure ready access to the support you need. With sales representatives located throughout the United States, we re available to meet your needs at any time in any place. Why Choose DBCI? The backbone of the DBCI product line is its roll-up door. We were one of the first manufacturers to dedicate resources to a commercial door product category, and today we remain an influential leader in the industry. Utilizing an in-house windtesting facility and state-of-the-art manufacturing equipment enables DBCI to manufacture its doors to the highest standards. DBCI remains true to its commitment of partnership, innovation and the manufacturing of superior products through numerous techniques. We offer solutions that best accommodate our customers and add value to your business. DBCI is committed to helping you get the most from your products. We offer accurate, timely estimates before the sale and responsive service after the sale. COMMERCIAL DOORS DBCI s commercial doors are designed and manufactured for strength and durability. They consist of interlaced steel sections forming a continuous corrugated profile. DBCI s commercial doors are fabricated to meet or exceed operational requirements with little or no maintenance. Whether you are a contractor, architect, supplier, door dealer or business owner, we have commercial roll-up doors to satisfy your needs. Deep-ribbed corrugation Maximum opening size of 12 wide x 18 tall Flexible wear strips 2 x 1 ½ galvanized angles Bulb astragal Stainless steel nuts and bolts 11-gauge axle on doors over 10 wide Utilizes 12, 16-gauge drums Shielded steel ball bearings in drums Full top sheet A.C.E. Guide System 16-gauge galvanized steel Adjustable bolt on head stop Polyethylene wear strip Pre-punched for lock and attachment fasteners Deep-ribbed corrugation Maximum opening size of 18 wide x 18 tall Flexible wear strips 2 x 1 ½ galvanized angles Bulb astragal Stainless steel nuts and bolts 11-gauge axle on doors over 10 wide Utilizes 12, 16-gauge drums Shielded steel ball bearings in drums Full top sheet Oil tempered torsion springs A.C.E. Guide System 14-gauge galvanized steel Adjustable bolt on head stop Polyethylene wear strip Pre-punched for lock and attachment fasteners Saddle clamps with set fasteners 10-gauge slide locks; 2 per door 16-gauge step plate; 2 per door ¼ steel angle T-bracket Opening Height Headroom Doors up to 10 tall of headroom Doors 10 to 14 tall of headroom Doors over 14 tall of headroom Insulated 2250 Series 1900 Series low overhead option Chain hoist 4:1 reduction Vision panels (17 x 5 ) Top draft stop Hood Steel mounting plates Electric operator Saddle clamps with set fasteners 10-gauge slide locks; 2 per door 16-gauge step plate; 2 per door ¼ steel welded angle T-bracket Opening Height Headroom Doors up to 10 tall of headroom Doors 10 to 14 tall of headroom Doors over 14 tall of headroom Insulated 2750 Series Chain hoist 4:1 reduction Vision panels (17 x 5 ) Top draft stop Hood Steel mounting plates Electric operator Low headroom 2400 Series LIGHT-DUTY COMMERCIAL-GRADE DOOR HEAVY-DUTY COMMERCIAL-GRADE DOOR 2000 SERIES 2500 SERIES Commercial and Self-Storage Doors DBCI s steel curtain roll-up doors are manufactured with hard, Grade E steel, ensuring strength and durability. We offer 15 standard colors and 7 non-standard colors. Please see our color chart, attainable on our website or by contacting your local DBCI sales representative, for color options. SPRINGS Commercial and Self-Storage Doors Springs are the most critical mechanical component of a steel curtain roll-up door. For maximum reliability, DBCI uses only oil-tempered torsion-type springs for its doors. Coordinating the design of a roll-up door with the proper spring assembly ensures longer and more durable use with minimal maintenance. Commercial Door Features Vision Panel Constructed of translucent flexible polycarbonate, the 5 x 17 vision panel allows light entry and provides outside visibility. The white 20-gauge frame is popriveted and is normally installed approximately 55 from the floor. The location and number of panels per door is limited. A.C.E. Guide Systems The A.C.E. (Advanced Engagement) guide system has been designed for DBCI s customers. Some of the benefits include universal mounting options, increased durability, excellent performance and ease of installation. DBCI s commercial door axles and drums are manufactured with industrial-grade steel. The door drums are designed and engineered specifically for commercial applications to ensure product integrity, a long life and high-capacity use. * ALL S APPLY TO 2000 AND 2500 SERIES INTERIOR ELEVATION SERIES 2000 WEAR STRIP STRIP SERIES 2000 MASONRY MOUNT MOUNT SERIES 2500 DOOR ENGAGEMENT SERIES 2000 INSULATED DOOR SERIES 2250 FOIL BACKED AIR-BUBBLE INSULATION VINYL VINYL SIDE SIDE DRAFT DRAFT STOP STOP 2 3 G TA STRIP TAPCON XL XL STRIP TAPCON XL XL STRIP STRIP SELF-DRILLING FASTENER SCREW WEAR STRIP STRIP MASONRY MOUNT MOUNT CURTIAN WEAR STRIP STRIP STRIP SELF-DRILLING W FASTENER STRIP SELF-DRILLING W FASTENER STEEL MOUNT WEAR STRIP STEEL MOUNT STEEL MOUNT STRIP STRIP SELF-DRILLING FASTENER SCREW STRIP WOOD WOOD SCREW FASTENER WEAR STRIP STRIP WOOD WOOD SCREW FASTENER WOOD MOUNT WEAR STRIP STRIP WOOD MOUNT WOOD MOUNT MOUNT WEAR STRIP CURTIAN STRIP WEAR STRIP SERIES GA GA
3 WIND-CERTIFIED COMMERCIAL-GRADE DOOR 5000 SERIES Fueled by constant changes in local and national building codes, as well as increasing insurance costs, doors with validated wind certification can dramatically reduce maintenance and replacement costs and minimize downtime. DBCI s wind-certified doors are designed to meet stringent building codes in coastal regions and Florida. Deep-ribbed corrugation with three-rivet windlock attachment Maximum opening sizes of 16 wide x 20 tall and 20 wide x 16 tall Flexible wear strips Approximate* MPH Certification 10 wide = 150 mph 12 wide = 150 mph 14 wide = 146 mph 16 wide = 140 mph *For test results on doors up to 20 wide, please contact DBCI Commercial Sales at x 1 ½ galvanized angles Bulb astragal Stainless steel nuts and bolts 11-gauge axle on doors over 10 wide Utilizes 12, 16-gauge drums Shielded steel ball bearings in drums Full top sheet Oil tempered torsion springs A.C.E. Guide System 12-gauge galvanized steel 12-gauge wind lock bar Adjustable bolt on head stop Polyethylene wear strip Pre-punched for lock and attachment fasteners Saddle clamps with set fasteners 10-gauge slide locks; 2 per door 16-gauge step plate; 2 per door ¼ steel angle T-bracket Opening Height Headroom Doors up to 10 tall of headroom Doors 10 to 14 tall of headroom Doors over 14 tall of headroom Insulated 5250 Series Chain hoist 8:1 reduction Header seal Hood Steel mounting plates Electric operator DBCI s self-storage doors and solutions are fabricated to meet the demands of the industry. They provide quick-and-easy installation, minimal maintenance, superior strength and exceptional durability. Self-Storage Door Features SELF-STORAGE DOORS * ALL S APPLY TO 5000 SERIES INTERIOR ELEVATION END OF AXLE END OF 10-1/2" 1/2" (*) BRACKET ATTACHMENT: BRACKET ATTACHMENT: CONCRETE/MASONRY: SLEEVE ANCHOR, 3/8" x 1-7/8" LG. WOOD: CONCRETE/MASONRY: LAG SCREW, 3/8-7 SLEEVE x ANCHOR, 3" LG. 3/8" X 1-7/8" LG. STEEL: WOOD: HEX LAG BOLT, SCREW, GR.5, 3/8-7 3/8-24 X 3" LG. x 1-1/4"LG. STEEL: HEX BOLT, GR.5, 3/8-24 X 1-1/4" LG. (*) FOR PUSH-UP OPERATION 6-1/2" FOR HAND (*) FOR CHAIN PUSH-UP OR OPERATION ELECTRIC OPERATION 6-1/2" FOR HAND 10" NOTE: LEFT CHAIN SIDE OR ELECTRIC DRIVE SHOWN OPERATION 10" NOTE: LEFT SIDE DRIVE SHOWN WALL WALL OPENING WIDTH TOP BARREL TOP ASSEMBLY BARREL ASSEMBLY 6-1/2" 6-1/2" 10-1/2" END END OF AXLE DOOR ENGAGEMENT CONCRETE/FILLED BLOCK JAMBS LH MOUNT SHOWN OUTSIDE INSIDE The purpose of the bottom bar is to add strength and security to the door. This functional bar has a clean, attractive finish that enhances the appearance of the doors. DBCI s bottom bars are constructed of 6063 T6 aluminum, which looks and wears well. Our vinyl weather seal is replaceable, which means that damage, wear and weather do not necessarily require replacement of the entire self-storage door. Tension Set Brackets Tension set brackets control how easily the self-storage doors open when unlocked. Older self-storage doors lack tension adjusters and require a door technician to readjust the spring tension. Our tension set brackets make adjusting roll-up doors easier, safer and faster. Facility maintenance personnel can adjust the selfstorage doors themselves in as little as five minutes. Latches HEAD STOP (REMOVABLE) HEAD STOP SYMMETRICAL (REMOVABLE) SYMMETRICAL 3/8" SLIP FOR FOR DOOR DOOR WIDTH WIDTH LESS THAN LESS THAN OR OR EQUAL TO 12'-10"; 1/2" 12'-10"; 1/2" SLIP FOR DOOR SLIP FOR DOOR WITH GREATER THAN WITH GREATER THAN 12'-10" 12'-10" AND LESS AND THAN LESS 16'-10" THAN 16'-10" Latches keep the doors closed and the storage unit s contents safe. DBCI s stainless steel and Apex latches maintain their integrity through the years. Our latches are constructed with limited pry points, double padlock compatibility and the ability to operate with magnetic alarm systems. TYPICAL PANEL PANEL MIN. WIND LOCK LOCK AT EVERY AT EVERY 1/2" OTHER CORRUGATION MASONRY MOUNT UNIVERSAL CONCRETE UNIVERSAL MASONRY JAMBS CONCRETE/ MASONRY JAMBS WOOD/ WOOD/ STEEL JAMB STEEL JAMBS EXISTING EXISTING STEEL JAMB STEEL JAMB BOTTOM BAR BAR ASSEMBLY ASSEMBLY 4" GRADE TYPICAL TYPICAL PANEL PANEL STEEL MOUNT WIND WIND LOCK LOCK AT AT EVERY EVERY OTHER CORRUGATION OTHER CORRUGATION 4 5
4 SELF-STORAGE DOOR WIND-CERTIFIED SELF-STORAGE DOOR 650 SERIES 690 SERIES INTERIOR ELEVATION 5 8 ribbed corrugation Many latch options available All latches accept double locks and 7 16 shackles Rain lip note: For proper exterior door installation, a 1 ½ deep rain lip must be formed in the concrete slab extending a minimum of 3 ½ from the interior face of the jamb 1 ½ x 1 ½ galvanized angles Replaceable bulb astragal Utilizes 9 ½, 18-gauge drums Oil tempered e-coated torsion springs, available in two springs upon request from 7 to 10 wide Fully accessible springs for inspection and maintenance 5 8 ribbed corrugation Many latch options available All latches accept double locks and 7 16 shackles Rain lip note: For proper exterior door installation, a 1 ½ deep rain lip must be formed in the concrete slab extending a minimum of 3 ½ from the interior face of the jamb 1 ½ x 1 ½ galvanized angles Replaceable bulb astragal Utilizes 9 ½, 18-gauge drums Oil tempered e-coated torsion springs, available in two springs upon request from 7 to 10 wide Fully accessible springs for inspection and maintenance * APPLIES TO 650 AND 690 SERIES * APPLIES TO 650 SERIES TENSIONER SUPPORT BRACKET BELL BELL ENTRY ENTRY TENSIONER TENSIONER ASSEMBLY ASSEMBLY OIL TEMPERED TORSION OIL TEMPERED TORSION SPRINGS SPRINGS EXPOSED EXPOSED FOR FOR EASY EASY ADJUSTMENT ADJUSTMENT AND AND LUBRICATION AXLE AXLE ASSEMBLY NON-TENSIONER NON-TENSIONER SUPPORT SUPPORT BRACKET BRACKET VERTICAL S FOR STEEL OR WOOD WOOD JAMBS TYP. TYP Guide System 18-gauge galvanized steel Pre-punched holes for anchors, slide latch, bracket attachment and head stop attachment Polyethylene guide strips provide easy, quiet operation 12-gauge head stops have slotted mounting holes for proper attachment 14-gauge galvanized steel handles 12-gauge tension bracket made for additional strength Shielded radial bearings for smooth operation Worm gear tensioning design allows for smooth adjustment 12-gauge bearing bracket on right side Insulated 651 Series Top and side draft stop Guide System 16-gauge galvanized steel guides and wind bar Pre-punched holes for anchors, slide latch, bracket attachment and head stop attachment Polyethylene guide strips provide easy, quiet operation 12-gauge head stops have slotted mounting holes for proper attachment 14-gauge galvanized steel handles 12-gauge tension bracket made for additional strength Shielded radial bearings for smooth operation Worm gear tensioning design allows for smooth adjustment 12-gauge bearing bracket on right side Insulated 691 Series Top and side draft stop DOOR ENGAGEMENT INSULATED DOOR SERIES 651 2" DOOR SHEET FOIL BACKED INSULATION INSULATION SIDE DRAFT STOP STOP 8 X 1/2 1/2 TEK TEK-SCREW Corrugated Swing Door 26-gauge door 20-gauge roll-formed X-bracing Galvalume with rolled edges for added strength 20-gauge hemmed stiles Stainless steel or Apex latch for security Pre-punched for latch Two 90-degree zinc hinges Frame and one Securawall hall partition fills a 5 -wide unit ADA Compliant Flush Swing Door 20-gauge flat sheet for door face Hat style stiffeners Glossy white frame Colors to match or complement your roll-up doors Seamless to complete a total flush hallway system Many latch options available 90-degree zinc hinges May be ordered with optional louvers to allow for air circulation ADA Compliant Locker Units For smaller 5 x 5 units in both double and triple stack configurations Pre-hung corrugated doors 1 locker floor in 20-gauge Galvalume 6 planks 20-gauge Galvalume support angles 500 Series frame Corrugated Swing Door 26-gauge door 20-gauge roll-formed X-bracing Galvalume with rolled edges for added strength 20-gauge hemmed stiles Stainless steel or Apex latch for security Pre-punched for latch Two 90-degree zinc hinges Frame and one Securawall hall partition fills a 5 -wide unit ADA Compliant Locker Units For smaller 5 x 5 units in both double and triple stack configurations Pre-hung corrugated or flush swing doors 1 locker floor in 20-gauge Galvalume 6 planks 20-gauge Galvalume support angles 300 or 500 Series frame SWING DOOR SELF-STORAGE DOOR SWING DOOR SELF-STORAGE DOOR 300 SERIES 500 SERIES * APPLIES TO 300 SERIES CORRUGATED SWING DOOR LOCKER FLOOR 5' 5' 5' (TYP) * APPLIES TO 500 SERIES FLUSH DOOR 2x2 20-GA. GALVALUME 2X2 20 GALVALUME ANGLE ANGLE LOCKER FLOOR FLOOR 20 GA GALVALUME 20-GA. GALVALUME 2x2 2X GA. ANGLE GALVALUME ANGLE PARTITION SHEETING SHEETING 20-GA. GALVALUME GALVALUME BOTTOM DOOR STOP 1 3/4" 3/4" CORRUGATED DOOR VERTICAL VERTICAL S FOR S MASONRY FOR OR CONCRETE MASONRY JAMBS OR CONCRETE JAMBS STRIP STRIP MASONRY MOUNT STEEL STEEL MOUNT WOOD MOUNT MOUNT MINI-LATCH * APPLIES TO 690 SERIES 1.75 DOOR ENGAGEMENT WINDLOCK BOTTOM ASTRAGAL PULL ROPE masonry MASONRY MOUNT mount steel STEEL MOUNT mount TYP. TYP WINDBAR 6 7
5 2 1 4 " MEZZANINE SYSTEM SUMMIT SERIES Flooring Component Mezzanine deck ¾ tongue-and-groove wood deck (gray or tan) Metal deck Concrete deck (supplied and poured by others) Structural Load-Bearing Components 5 x 10 grid system Z-Purlins and C-Channel Structural PBU partition panels Corrugated metal decking Mezzanine stairs (optional) 125 psf floor-load rating Optional Components Lifts Handrails Rolling Steel Doors (Slat Doors) Sectional Doors Services Design of unit mix layout Structural drawings Installation of mezzanine components Roll-Up Frames This strong, flush 20-gauge frame is used in both corrugated and flush hallway systems. The frames include base plates, back plates and top channels. 20-gauge back plate for mounting header/ filler panel and roll-up door bracket 20-gauge base plate that mounts roll-up frame to door Press break construction for various sizes Available in glossy white or Galvalume Flush Header Panel The flush header panel with roll-up frames creates a clean flush hallway. The glossy white flush header panel reflects light, providing a brighter interior. 20-gauge panel For interior hallway systems Single-piece construction Glossy white paint finish Filler Panel Filler panels are used in interior and exterior applications. The panels are available in matching or accenting colors. 26-gauge panel, support channel and angles Framed in at the sides, top and bottom with matching support channels Angles can be manufactured to match the color of the roll-up door or a contrasting color available SELF-STORAGE SYSTEMS FRAMES & PANELS WINE LOCKERS VINEYARD SERIES The Vineyard series comes in multiple faux wood grain options and is made of galvanized steel. This product allows wine to mature without disturbance and provides protection against many damaging conditions. It also provides the classic look of wood without the expense. Wine Locker Units Available in single- and double-stack configurations Available with pre-hung flush, vinyl-coated wood grain swing doors Complete 500 Series frame with vinyl wood grain coat 1 locker floor in 20-gauge Galvalume 6 planks 20-gauge Galvalume support angles Flush Swing 20-gauge flat sheet for door face Hat style stiffeners Vinyl wood grain finish in variety of options Many latch options available 90-degree zinc hinges May be ordered with optional louvers to allow for air circulation * ALL S APPLY TO FRAMES AND PANELS ROLL UP FRAME 2 1/4" 1 3/4" 3 4 " 3 7 3/8" 8 " TYP. 5/8" 5 8 " TL SINGLE ROLL-UP FRAME LENGTH: TL SINGLE VARIES ROLL-UP FRAME MATL: 20-GA. LENGTH: VARIES MATL.: 20 GA. SINGLE ROLL-UP FRAME " 2 1/4" " 16" TYP. DOUBLE Double ROLL-UP Roll Up FRAME Frame TL DOUBLE ROLL-UP FRAME LENGTH: TL DOUBLE VARIES ROLL-UP FRAME MATL: 20-GA. LENGTH: VARIES MATL.: 20 GA. 16" TYP. 1 3/4" 1 3/4" " 2 1/4" " FLUSH HEADER VARIES VARIES FLUSH HEADER LENGTH FLUSH AND WIDTH: HEADERVARIES MATL: LENGTH 20-GA. & WIDTH: VARIES MATL.: 20 GA. 2" 2" * ALL S APPLY TO VINEYARD SERIES FLUSH DOOR LOCKER FLOOR FILLER PANEL 2X2 2x2 20-GA. GALVALUME ANGLE ANGLE LOCKER FLOOR 20-GA. GALVALUME TRIM-LINE SYSTEM TOP TOP ANGLE ANGLE (OPTIONAL) (OPTIONAL) FILLER PANEL SIDE SIDE SIDE (BOTH (BOTH SIDES) SIDES) 2x2 2X GA. GALVALUME ANGLE ANGLE DOOR HEIGHT MARK MARK CORRUGATED SWING DOOR PARTITION SHEETING PARTITION SHEETING ROLL-UP ROLLUP FRAME FIGURE 1 FIGURE 1 1 1/2" 5/8" (S) CORRUGATED (S) CORRUGATED FILLER FILLER PANEL SIDE PANEL ANGLE SIDE ANGLE (R) FILLER PANEL PANEL SHEET SHEET (Q) (Q) TL-FILLER BOTTOM BOTTOM (S) CORRUGATED FILLER PANEL PANEL SIDE ANGLE OUTSIDE VIEW OUTSIDE VIEW BOTTOM 20-GA. GALVALUME BOTTOM 5' (TYP) 5' (TYP) 8 9
6 NON-LIGHTED SOFFIT (OPTIONAL) NON-LIGHTED SOFFIT (OPTIONAL) 1/2" PRESSURE BEND INTERIOR HALLWAY SYSTEMS WALL SYSTEMS * ALL S APPLY TO WALL SYSTEMS CORAWALL Corawall Hallway System This completely flush 24-gauge vertical interlocking hallway panel is available in glossy white or acryliccoated Galvalume. The 12 self-aligned interlocking panel allows for fasteners to remain concealed except where it is secured with a channel at the top. 24-gauge panel 20-gauge top channel 20-gauge bottom channel 22-gauge mid-span Interlocking flush design Securawall Hallway System The 20 wide, corrugated 26-gauge panels lock together tightly at the side seams without the use of exposed fasteners. The Securawall System provides an economical and attractive divider partition. 12" REF. 12" REF. 26-gauge panel 20-gauge top channel 20-gauge bottom channel 22-gauge mid-span Seam attachment design Available in glossy white and acrylic-coated Galvalume CORAWALL LENGTH: CORAWALL VARIES MATL: LENGTH: 24-GA. VARIES MATL.: 24 GA. REF. REF. Securawall Unit Partition The Securawall partition is a non-load bearing interior unit divider. It provides for an economical and attractive interior partition wall system. The 20 -wide sections lock together tightly at the side seams without the use of exposed fasteners. 26-gauge partition 20-gauge top angle 20-gauge bottom channel 22-gauge mid-span Seam attachment design Available in glossy white and acrylic-coated Galvalume Mid-Span Mid-span horizontal bracing provides support for greater wall strength. Many customers use this inexpensive option to accommodate for unusual loads placed on walls by careless tenants. 20-gauge channel Utilizes a hem and channel construction to eliminate sharp edges and conceal exposed fasteners SECURAWALL UNIT PARTITION 1 5 5/8" 8 " END END VIEW VIEW 22-GA. GA. GALVALUME CALVALUME FT. FT. LENGTHS RETURN 1 1/2" 2 " Mesh Mesh can be installed either horizontally above or vertically between units. The galvanized mesh is attached to the top edges of the units by mesh angles. The mesh should be used in storage units with overhead gaps that might allow entry. 2 x 2 16-gauge welded wire 2 x 2 Galvalume mesh angles 26-gauge special wire mesh clips Kickplates The 18-gauge Galvalume strip provides excellent protection from pushcarts and hall traffic while giving a clean, cosmetic appearance. 18-gauge Galvalume strip Pressure bend top and bottom Available in a galvanized or diamond plate tread design Corner Guards Optional corner guards provide long-lasting durability for both corrugated and flush hallway systems. The 18-gauge Galvalume angle protects against damage from hall traffic while complementing the interior appearance. 18-gauge Galvalume angle Pressure bends on leading edges Standard 4 -tall or full-hall height is available Mitered corners also available Available in a galvanized or diamond plate tread design Mullions Mullions are economical, non-structural, painted flush jambs that divide larger exterior units into smaller openings. 26-gauge painted mullion skin 20-gauge base plate 20-gauge extensions One pair 18-gauge mini-guides Burglar Bars The burglar bars are galvanized hat channels that provide security for the space above the top of the hallway system or above the unit partition. The burglar bar attaches horizontally to the existing support columns at 8 increments to provide additional security. 2 ¾ -wide galvanized channels Self-drilling fasteners Available in glossy white or acrylic-coated Galvalume Soffit Systems Light Soffit: The light soffit is a 1 x 10 flush system that accommodates an optional 1 x 4 flush fluorescent light. When used with other DBCI hallway products, the soffit helps establish a bright and safe atmosphere for the owner and tenants. Hallway Soffit: The three-piece, 26-gauge flush soffit complements the interior system with a bright, reflective hallway ceiling. The 3 -wide soffit leaves a 1 gap on both sides to allow for air circulation while concealing HVAC ducts, electrical, plumbing and sprinkler work. The hallway soffit can also be used to support hallway lighting. Entry Soffit: Entry or full soffit is used in areas where HVAC, electrical, plumbing and sprinkler systems are completely concealed. 26-gauge 20-gauge universal soffit channel supports soffit panels Glossy white paint finish Specific soffit pieces nest together to create a flush soffit 1 x 4 GT static troffer light 2 x 2 glossy white angle INTERIOR HALLWAY SYSTEMS SELF-STORAGE SYSTEMS SECURITY ACCESSORIES SECURAWALL HALLWAY PARTITION (E) STARTER ANGLE ANGLE FASTENERS TO TO BE BE INSIDE INSIDE BOTTOM BOTTOM (SEE (SEE SECTION SECTION C-C) C-C) (G) UNIVERSAL ANGLE ANGLE (A) BOTTOM APPLICATION OF OPTIONAL MID SPAN BRACING (3) (3) #8 #8 X 1/2" X 1/2 GALVANIZED " GALVANIZED TEK-SCREWS PER STARTER TEKS SCREWS PER ANGLE EQUALLY SPACED WITH MOCAPS STARTER ANGLE EQUALLY SPACED WITH MOCAPS (E) STARTER ANGLE (E) A MID-SPAN (E) (E) STARTER ANGLE ANGLE (G) UNIVERSAL ANGLE FASTENERS TO TO BE BE INSIDE BOTTOM (SEE (A) BOTTOM (SEE SECTION SECTION C-C) C-C) FRONT VIEW APPLICATION OF OPTIONAL MID SPAN BRACING TEK-SCREWS TEKS SCREWS WITH WITH MOCAPS MOCAPS 1 2 LOCKING SEAM (TYP) OVERLAPPING SEAM (3) #8 X 1/2" GALVANIZED " TEK-SCREWS TEKS SCREWS PER PER STARTER ANGLE EQUALLY SPACED WITH STARTER ANGLE MOCAPS EQUALLY SPACED WITH MOCAPS B B C C (E) STARTER STARTER ANGLE(E) A (6) (6)#8 #8 X X 1/2" 1/2" GALVANIZED TEK- SCREWS PER PANEL TEKS SCREWS PER PANEL LIGHT SOFFIT ENTRY SOFFIT HALLWAY SOFFIT * APPLIES TO SECURITY * APPLIES TO ACCESSORIES NON-LIGHTED SOFFIT (OPTIONAL) NON-LIGHTED SOFFIT (OPTIONAL) MESH TOP ANGLE FOR TOP PARTITION ANGLE FOR PARTITION WALL WALL 2" 2" X 2" X 20 2" GA. 20-GA. GALVALUME MESH ANGLE 2" X 2" MESH ANGLE 2" x 2 20-GA. 20 GA. GALVALUME GALVALUME 5' 5' MAX WIRE MESH WIRE MESH 2" 2" X x 2" 2" x X 1616-GA. KICKPLATE 12" 12" 10'-0" 10'-0" 1/4" X 7/8" STITCH FASTENER WITH FENDER WASHER 1/4" X 7/8" STITCH OR MESH SCREW CLIP AT WITH FENDER WASHER OR 24" MESH ON CLIP C AT ENTER 24" ON CENTER 18-GAUGE 18 GAUGE GALVALUME GALVALUME KICK PLATE KICK PLATE FASTEN FASTEN ABOVE FINISHED ABOVE FLOOR FINISHED FLOOR WITH 8XWITH 2 1 GALVALUME 8 X 1/2" TEK GALVALUME SCREWS TEK-SCREWS SYSTEM SYSTEM 300 HALLWAY SHOWN HALLWAY SYSTEM SHOWN BURGLAR BAR 10'-0" 10'-0" 1 5 5/8" 8 " 2 3 3/4" 4 " CORNER GUARD 4'-0" TO FULL HALL HEIGHT 4'-0" TO FULL HALL HEIGHT 3" X 3" 18-GAUGE 3" X 3" 18 GAUGE GALVALUME CORNERGUARD CORNER GUARD 3" 3" 1/2" PRESSURE BEND
7 Toll Free: Website: DOUGLASVILLE, GA HOUSTON, TX CHANDLER, AZ
8 COLOR CHART COMMERCIAL & SELF-STORAGE ROLL-UP DOORS Standard Colors SILICONIZED POLYESTER Final color selection should be made from actual color chips. For the most current information available, visit our website at All colors have a 40-year film integrity limited warranty. Polar White and High Gloss White do not have a chalk and fade warranty. Polar White is a Straight Polyester. POLAR WHITE HIGH GLOSS WHITE GALLERY BLUE RUSTIC RED IVY GREEN FERN GREEN HAWAIIAN BLUE LIGHT STONE BURNISHED SLATE SADDLE TAN SILHOUETTE GRAY EVERGREEN COCOA BROWN CRIMSON RED SUNSET ORANGE * Final color selection should be made from actual color chips. Non-Standard Colors SILICONIZED POLYESTER Non-Standard Colors may require extended lead time. Color matching is also available for sizable orders. Final color selection should be made from actual color chips. For the most current information available, visit our website at All colors have a 40-year film integrity limited warranty. MARINE GREEN SAFETY YELLOW TEAL DARK TEAL MAROON PATRIOT RED TANGERINE COLONY GREEN Integrity. Partnership. Quality dbci.sales@dbci.com For complete performance specifications, product limitations and disclaimers, please consult DBCI s paint warranties. Upon receipt of payment in full, these warranties are available upon request for all painted products. Sample copies can be found at or contact your local DBCI Sales Representative
DOORS Commercial and Self-Storage
www.mbci.com DOORS Commercial and Self-Storage The Power of INNOVATION Why Choose MBCI? We were one of the first manufacturers to dedicate resources to a commercial door product category, and today we
More informationPRODUCTS & SERVICES DOORS HALLWAY SYSTEMS COMPONENTS
PRODUCTS & SERVICES DOORS HALLWAY SYSTEMS COMPONENTS Exceptional Performance YOU CAN RELY ON When you partner with us, you can be confident that you'll benefit from on-time and accurate delivery, fast
More informationINTERIOR SYSTEMS COMPLETE PRE-ENGINEERED INTERIOR SYSTEMS EVERYTHING YOU NEED TO CREATE SECURE, ECONOMICAL STORAGE SPACES
INTERIOR SYSTEMS COMPLETE PRE-ENGINEERED INTERIOR SYSTEMS EVERYTHING YOU NEED TO CREATE SECURE, ECONOMICAL STORAGE SPACES The Wayne Dalton Interior Wall System is a complete, pre-engineered system for
More informationImportant Notice. CAUTION: Use proper lifting equipment and correct procedures to avoid injury.
Integrity. Partnership. Quality. SELF-STORAGE DOOR INSTALLATION INSTRUCTIONS SERIES 690 Important Notice In the following text, the word: Warning: Indicates that serious injury or death can result from
More informationImportant Notice. caution: Use proper lifting equipment and correct procedures to avoid injury.
Integrity. Partnership. Quality. COMMERCIAL DOOR INSTALLATION INSTRUCTIONS SERIES 1900, 1950, 2000, 2250, 2500, 2750 Important Notice In the following text, the word: Warning: Indicates that serious injury
More information3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6
2 DOOR ARRANGEMENT. A Lay door on a clean floor inside of building and in front of opening (see Figure 1). NOTE: Door can be damaged if laid on unclean surface. B Distribute parts bags, guides, stops and
More informationRolling Curtain door Manual
Rolling Curtain door Manual Installation Maintenance parts Model 944 PHONE 800 448 8979 FAX 800 236 8722 website www.tracrite.com EMAIL tr@tracrite.com ADDRESS 216 Wilburn Road Sun Prairie, WI 53590 This
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationFOR PROFESSIONAL GARAGE DOOR INSTALLERS
Composite Garage Doors Installation Instructions FOR PROFESSIONAL GARAGE DOOR INSTALLERS Tools required Screwdriver Claw Hammer Locking Pliers Power Drill Level with a 3/32" Drill Bit Utility Knife 9/16",
More informationEngineering Services Program
GDR41 1214 Product Evaluation Engineering Services Program The following product has been evaluated for compliance with the wind loads specified in the International Residential Code (IRC) and the International
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
More informationCYCL E STAT IO N. High Capacity
CYCL E STAT IO N High Capacity The Dero Cycle Station provides high-capacity, covered bike parking for bicycle commuters. With a high roof and open platform, the Dero Cycle Station allows bike corrals,
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More informationInstallation Manual for Metal Emperor Lockers
P a g e 1 Table of Contents Page General Notes and Tools Required 2-3 Assemble Shelves with Coat Hooks/Coat Rods 4 Fastening Chart 5 Knock Down Locker Assembly (Banks of Three) 6-12 Appendix A: Dress End
More informationInstallation Manual. Solid Plastic Toilet Partitions. IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.:
Installation Manual Solid Plastic Toilet Partitions Toilet Partitions & Lockers IN THE U.S.A.: Hadrian Inc., 7420 Clover Avenue, Mentor, OH 44060 Telephone: 440-942-9118 Fax: 440-942-9618 U.S. toll free
More informationDoor Canopy. PDL Building Products Industrial Parkway, N. Olmsted, OH Phone:
Door Canopy Door Canopies are attractive and efficient while eliminating the need and expense of drafting and manufacturing canopies as part of the building package. Construction: 26 gauge material around
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More information2015 Feeney (8/15) # D. Aluminum Railing Systems
2015 Feeney (8/15) #2012-425D Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
More informationDW HORIZONTAL INSTALLATION
AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S
More informationDesign and Construction Standards SECTION ATHLETIC LOCKERS
SECTION 10505 ATHLETIC LOCKERS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The provisions of the General Conditions, Supplementary Conditions, and the Sections included under Division 1, General Requirements,
More informationMANUFACTURING INC. Specifications
Page 1 of 4 GENERAL 11 Aluminum security screen doors must be tested by a recognized testing laboratory to conform to SMA 6001-2002 Proposed American National Standard Specifications for Metal Protection
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationTaurean Sectional Garage Door INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN MAKE SURE THESE INSTRUCTIONS ARE READ AND UNDERSTOOD COMPLETELY. THESE INSTRUCTIONS ARE INTENDED FOR PROFESSIONAL GARAGE DOOR INSTALLERS. ALL REFERENCES ARE TAKEN FROM THE INSIDE LOOKING
More informationCSA-2.5 IS Multiple Narrow Panel Inside Slide Door-Revision 09/14 Assembly and Installation Instructions
1 CSA-2.5 IS Multiple Narrow Panel Inside Slide Door-Revision 09/14 Assembly and Installation Instructions 1. Open all structural component and hardware boxes and compare with itemized packing list. Note:
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationWPS crew Doors Installation instructions
WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left
More information2013 Feeney (2/14) # B. Aluminum Railing Systems
2013 Feeney (2/14) #2012-425B Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
More informationPRE-ENGINEERED HORSE STALL SYSTEMS 4884 HSD STANDARD SLIDING DOOR. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4884 HSD STANDARD SLIDING DOOR & Assembly Installation Instructions 4884 HSD Standard Sliding Door Components Some Considerations When Choosing Your Stall System - 1
More information900 SERIES WALL PANELS
CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900
More informationPlease read and understand all instructions before beginning. These instructions cover the non-impact aluminum sliding glass door.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
More informationMeasuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware
Recommendations for Measuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware By Keith E. Pardoe Speed, accuracy, and above all consistency are essential when determining the clearance
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationMasonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
More informationSection 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the
More informationInstallation Instructions - Model V4JSD 1
Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS LAMINATED P LASTIC TOILET PArTITIONS 1540 ClassicSeries with Options IMPORTANT: Storage and Handling Information on last page. For faster, easier installation, please review these
More informationSECTION SWINGING AUTOMATIC ENTRANCES
SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO IR/DOR-O-MATIC SENIOR SWING & ASTRO SWING OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section
More informationSafe and secure Dero
B I K E D E P OT Safe and secure Whether the project is at a transit station, university campus, or residential building, the Bike Depot s modular design lets customers easily build out to meet their space
More informationSTACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS
STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS 1290363 Revision 1 12/16 Page 1 Weather Shield Mfg., Inc. NOTICE CAUTION! Failure to install and maintain our product according to these instructions
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationREVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION
INSTALLATION INSTRUCTIONS Service Doors, Counter Service Doors & Grilles REVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION GENERAL NOTES: Instructions are intended for qualified door mechanics
More informationModel Series T o r s i o n
Model Series 7100 T o r s i o n Residential and Light Commercial Rear Mount Low Headroom Outside Hookup Table Of Contents Pre-Installation 2 Important Safety Instructions 2 Removing an Existing Door and
More informationAssembly Instructions
Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt
More informationACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
More informationInstallation Manual for Metal Toilet Partitions Standard Series
For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations
More informationModular XP Ramp Assembly Manual
Modular XP Manual 1 Contents Overview... 2-5 Section 1: 1.1 Tools required...6 1.2 Hardware list...6 Ramp & Platform Standard Parts 2.1 Ramp Parts...7 2.2 Platform Parts...8 2.3 Standard Platform Configurations...
More informationGrowSpan Single Swinging Door Black-Out Door Kit
GrowSpan Single Swinging Door Black-Out Door Kit ATTENTION: Door kit includes materials for door only. All other components shown in the diagram above and diagrams throughout this guide are not included
More informationSECTION SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR
SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section describes
More informationTwin-Wall Double Swinging Door Kit
115021 Twin-Wall Double Swinging Kit READ THIS DOCUMENT BEFORE YOU BEGIN Thank you for purchasing this GrowSpan door kit. When properly assembled and maintained, this product will provide years of reliable
More informationLOCKER SPECIFIERS GUIDE. The standard of excellence for business, industry and institutions. Lockers Cabinets Shelving
LOCKER SPECIFIERS GUIDE Lockers Cabinets Shelving The standard of excellence for business, industry and institutions FINISH GUIDE NANO METAL ROLLER LATCHING SYSTEM For unmatched security, nano metal roller
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationRESIDENTIAL GARAGE DOOR INSTALLATION INSTRUCTIONS UNITED
RESIDENTIAL GARAGE DOOR INSTALLATION INSTRUCTIONS UNITED THIS GENERAL INSTRUCTION MANUAL IS INTENDED FOR THE INSTALLATION OF RESIDENTIAL GARAGE DOORS AND GENERAL INFORMATION FOR COMMERCIAL DOORS. DOORS
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationInstallation Instructions
AMPCO Stainless Steel and Baked Enamel Toilet Partitions AMPCO Florida 11400 NW 36 th Avenue Miami, FL 33167 T. 305.821.5700 florida@ampco.com AMPCO Texas 201 Railroad Avenue Sanger, TX 76266 T. 940.458.7401
More informationPRO Series Brakes Operating Instructions
PRO Series Brakes Operating Instructions Tapco Products Company PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock,
More informationChapter 17 - Porch Trim
Chapter 17 - Porch Trim Contents Chapter 17 - Porch Trim... 17-1 Timing & Prerequisites... 17-2 Trim on Porch Beams (Volunteer)... 17-4 Smart Trim on the Bottom of the Beam... 17-4 Smart Trim on the Inside
More informationGIRTS ON BACK OF BUILDING
GIRTS ON BACK OF BUILDING ALL GIRTS ARE 1 1/2 SQUARE TUBE. GIRT LENGTHS FOR 12, 20, 24, AND 30 WIDE BUILDINGS: ON 12 WIDE BUILDINGS GIRTS ARE 67 3/4 LONG ON 20 WIDE BUILDINGS GIRTS ARE 56 3/4 LONG ON 24
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationInstall Instructions. NewAge Steel Welded Tall Locker
Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x
More informationInstallation Manual for Metal Toilet Partitions Elite & Elite Plus Series
P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations 4 STEP 2: Fasten Floor Brackets 4 & 5 STEP 3: Erect Panels 6 STEP 4: Erect Wall Pilaster 7
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationSalter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review
More informationRead guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Installation Guide for E-Series/Eagle High-Performance Mullion Windows with LVL Reinforcement and Installed Using Type B Clips Thank you for choosing Andersen. Instructions are for typical, new wood-framed
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationL & T Open Shelf Filing System
L & T Open Shelf Filing System Contemporary Styling Shelf covers shelf supports for a clean contemporary look. Sleek, Attractive Appearance With no exposed holes on uprights. Easy Assembly Shelf supports
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED
More informationWINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS
WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com See garage door owner s manual for
More informationPRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)
More informationSECTION INTERIOR SIGNAGE
SECTION 10 14 02 INTERIOR SIGNAGE PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by
More informationInstallation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
More informationSecurity Inspections are offered at no charge to Bunker Hill, Piney Point, and Hunters Creek residents.
MEMORIAL VILLAGES POLICE DEPARTMENT 11981 Memorial Drive Houston, Texas 77024 (713) 365-3700 www.mvpdtx.org Serving the cities of Bunker Hill, Piney Point, and Hunters Creek Security Inspections As a resident
More informationMarvin Patio Doors VALUE THROUGH AND THROUGH
Marvin Patio Doors VALUE THROUGH AND THROUGH 2 Learn more at Marvin.com at our very core, we are craftspeople who take pride in building the right way. that is why, just like every window, we build each
More informationSpring Loaded SCREEN-PRO. All Season Roll-Up Doors IN-JAMB MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST
Spring Loaded SCREEN-PRO All Season Roll-Up Doors IN-JAMB MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged, immediately
More informationK.D. LOCKER ASSEMBLY INSTRUCTIONS
K.D. Locker Assembly Instructions PN 0860 K.D. LOCKER Updated /05 ASSEMBLY INSTRUCTIONS These Instructions Cover 3 Types of Lockers: VANGUARD, GUARDIAN AND INVINCIBLE II Contents General Instructions 1
More informationInstallation Guidelines
Page 1 Two inch () Porch Screening System Extruded Screen Walls Only Kit Installation Guidelines Tools You ll Need 4 ft. Carpenter s level Chalk line (to mark U channel locations) Chop saw with a metal
More informationStorefront Installation Guide INSTALLATION INSTRUCTIONS
STOREFRONT General Notes 1. Check contract documents and shop drawings, and understand and clarify any Field Verify Notes, approvals of drawings, and products required to be familiar with the project.
More informationModular XP Ramp Assembly Manual
Modular XP Manual 1 Contents Overview... 2-5 1.1 Tools required...6 1.2 Hardware list...6 Ramp & Platform Standard Parts 2.1 Ramp Parts...7 2.2 Platform Parts...8 2.3 Standard Platform Configurations...
More informationWAL-MART SUPERCENTER # ; Milwaukie, OR: SPECIFICATIONS. Revisions to Specification Fence
MILWAUKIE OR #3144-00 ADDENDUM #5 NARRATIVE: 11-08-12 WAL-MART SUPERCENTER #3144-00; Milwaukie, OR: SPECIFICATIONS SPECIFICATIONS Revisions to Specification 02822 Fence Spec division 02822 has been revised
More information6400, 8400 and 9400 Series Sliding Patio Door
Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel
More informationShetland Stalls Installation Instructions
Shetland Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 1/9/18 Before you start Kit can accommodate up to 12 wide stall front
More informationPanel Assembly and Installation
Assembly and Installation Assembly and Installation for Andersen 400 Series Frenchwood, 200 Series Narroline, 200 Series Perma-Shield Gliding Patio Doors and 400 Series Perma-Shield Gliding Patio Doors
More information1/4 FRAMELESS DOOR WITH INLINE PANEL 1413A-1713A-1813A
1/4 FRAMELESS DOOR WITH INLINE PANEL 1413A-1713A-1813A F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233 QCI5233 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More information400 SERIES VERTICAL INSTALLATION
CI-DS-01-400V CI-PJ-01-400V CI-PJ-02-400V CI-PJ-03-400V CI-BS-01-400V CI-BS-02-400V CI-BS-03-400V CI-BS-04-400V CI-BS-05-400V CI-OC-01-400V CI-OC-02-400V CI-IC-01-400V CI-IC-02-400V CI-FO-01-400V CI-FO-02-400V
More informationN. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems
More informationDOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
More informationSpiral Slide
IMPORTANT Page 1 PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section includes standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
More informationTHIS PAGE INTENTIONALLY LEFT BLANK
THIS PAGE INTENTIONALLY LEFT BLANK Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationINOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS
INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.
More informationSeries D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow
More information