CAD / CAM- POLISHING SYSTEMS

Transcription

1 CAD / CAM- POLISHING SYSTEMS including current test reports and awards

2 Bring your CAD / CAMrestorations up to a high gloss finish with the new MEISINGER LUSTER polishing systems. Quality that catches the eye.

3 Content LUSTER for Zirconia 2-3 LUSTER for e.max 4-5 LUSTER for Enamic 6-7 LUSTER for Suprinity 8-9 LUSTER for Lava TM Ultimate 0- Other MEISINGER polishing systems 2-3 CAD / CAM-block materials at a glance 3 MEISINGER polishing systems Test reports and awards 4-5 MEISINGER products in practical testing 6-7

4 LUSTER for Zirconia Top grade in Clinicians Report (see page 4) LUS85 Extraoral HP Laboratory Set LUS9 Intraoral Adjusting and Polishing set Fig.. Shank Ref.-No. Size Pieces/Kit 9736H HP Z652R HP DCA04 HP Fig.. Shank Ref.-No. Size Pieces/Kit Z080 FG Z0850 FG Z0833 FG DCA04 RA DCA06 HP DCA3 RA DCA0 RA DCA0 HP DCA2 HP DCA4 RA =RA, 34=FG Blue ring Universal grinding Grit: medium m 04=HP 2

5 The MEISINGER LUSTER for Zirconia polishing system has been specially developed for use on monolithic zirconium oxide restorations, e.g. Lava TM Plus. The system includes diamond polishers for intraoral and extraoral use. Both sets consist of a two-stage polishing system that can be used entirely without polishing paste and produces an excellent high gloss finish. Further instruments for adjusting contact points or areas round off the system perfectly. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use. Convincing results for MEISINGER LUSTER for Zirconia in Clinicians Report and Dental Advisor: 56 % of doctors would switch to MEISINGER LUSTER for Zirconia and 86 % would recommend it* (further information page 4). * Lava TM is a registered trademark of 3M Quick and easy without polishing paste Unprocessed state of a fully anatomical zirconium oxide crown Z652R: Grinding of the crown external shape, Recommended rotary speed: rpm 9736H: Trimming the contact point, Recommended rotary speed: rpm DCA04: Targeted smoothing of the occlusal surface, DCA06: Smoothing of the crown external shape, DCA0: High gloss polishing of the occlusal surface without high pressure, DCA2: High gloss polishing of the crown external shape, Result: high gloss by polishing with LUSTER set LUS85 53

6 LUSTER for e.max (Lithium Disilicate) Top grade in Clinicians Report (see page 4) LUS80 Extraoral HP Laboratory Set LUS00 Intraoral Adjusting and Polishing set Fig.. Shank Ref.-No. Size Pieces/Kit 9736G HP Fig.. Shank Ref.-No. Size Pieces/Kit DPO02 RA DPO07 RA DPO02 HP DPO05 RA DPO03 HP DPO08 RA Z080 FG DPO05 HP Z850F FG DPO06 HP =RA, 34=FG Z833F FG =HP Blue ring Universal grinding Grit: medium m Red ring Smoothing Grit: fine m 4

7 The MEISINGER LUSTER for e.max polishing system has been specially developed for use on lithium disilicate restorations. The diamond polishers included are suitable for intraoral and extraoral use. LUSTER for e.max offers the user a two-stage polishing system entirely without polishing paste. The result is convincing with its brilliant high gloss. Further instruments for grinding contact points or areas round off the system perfectly. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use. MEISINGER LUSTER for e.max convinced Clinicians Report and Dental Advisor evaluators where 87 % would switch to MEISINGER LUSTER for e.max and 89 % would recommend it* (further information page 4). * IPS e.max is a registered trademark of Ivoclar Vivadent GmbH Quick and easy without polishing paste Unprocessed state of a fully anatomical lithium disilicate crown 9736G: Trimming the contact point, Recommended rotary speed: rpm DPO02: Targeted smoothing of the occlusal surface, DPO03: Smoothing of the crown external shape, DCA05: High gloss polishing of the occlusal surfaces without high pressure, DPO06: High gloss polishing of the crown external shape, Recommended rotary speed: rpm Result: high gloss by polishing with LUSTER set LUS80 75

8 LUSTER for Enamic NEW from MEISINGER LUS0 Extraoral HP Laboratory set LUS02 Intraoral Adjusting and Polishing set Fig.. Shank Ref.-No. Size Pieces/Kit 950U HP Fig.. Shank Ref.-No. Size Pieces/Kit 9502U RA U HP U RA U HP U RA U HP HP HP HP U RA RA RA RA RA HP =RA 04=HP 6

9 The MEISINGER LUSTER for Enamic polishing system has been specially developed for use on hybrid ceramic restorations. The system consists of two sets, which are adapted for intraoral and extraoral use. The polishing instruments provide pre-polishing and high gloss polishing for a coordinated two-stage system. Occlusal surfaces, cusps and fissures can be optimally processed without polishing pastes and are then impressive with their outstanding high gloss finish. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use. Enamic is a registered trademark of VITA Zahnfabrik H. Rauter GmbH & Co. KG Quick and easy without polishing paste Unprocessed state of a fully anatomical hybrid crown 950U: Smoothing of the occlusal surface, Recom. rotary speed: rpm 9509U: Smoothing of the edges and occlusal surfaces, Recom. rotary speed: rpm 9509U: Smoothing of the crown external shape, Recommended rotary speed: rpm 9508U: Targeted smoothing, e.g. fissures, Recommended rotary speed: rpm 9780: High gloss polishing of the occlusal surface, Recommended rotary speed: rpm 9786: High gloss polishing of the edges and occlusal surfaces, Recommended rotary speed: rpm 9787: High gloss polishing of the crown external shape, Recom. rotary speed: rpm 9782: Targeted high gloss polishing, e.g. fissures, Recom. rotary speed: rpm Result: high gloss by polishing with LUSTER set LUS0 97

10 LUSTER for Suprinity NEW from MEISINGER LUS03 Extraoral HP Laboratory set LUS04 Intraoral Adjusting and Polishing set Fig.. Shank Ref.-No. Size Pieces/Kit Fig.. Shank Ref.-No. Size Pieces/Kit DCA03 HP DCA5 RA DCA04 HP DCA04 RA DCA06 HP DCA3 RA V DCA6 RA DCA09 HP DCA0 RA DCA0 HP =RA DCA4 RA DCA2 HP =HP 9524P

11 The MEISINGER LUSTER for Suprinity polishing system has been specially developed for use on VITA SUPRINITY, a zirconium dioxide reinforced lithium silicate ceramic. Two different sets allow use in the laboratory and intraorally. Both sets contain pre-polishing and high gloss polishers, which are optimally coordinated in their shape and grain size. The two-stage system is easy to use without polishing paste on occlusal surfaces, cusps and fissures and is convincing with its absolutely high gloss finish. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use. Suprinity is a registered trademark of VITA Zahnfabrik H. Rauter GmbH & Co. KG Quick and easy without polishing paste Unprocessed state of a fully anatomical zirconium dioxide reinforced lithium silicate crown DCA04: Targeted smoothing of the occlusal surface, DCA03: Small targeted corrections, DCA06: Smoothing of the crown external shape, DCA0: High gloss polishing of the occlusal surface without high pressure, DCA09: High gloss polishing of the corrections, DCA2: High gloss polishing of the crown external shape, Result: high gloss by polishing with LUSTER set LUS03 9

12 LUSTER for Lava TM Ultimate Exclusive offer: Polishing set + Lava TM Ultimate CAD / CAM Restorative 3M000 Lava TM Ultimate polishing set Fig.. Shank Ref.-No. Size Pieces/Kit 95U HP P HP H HP H HP HP HP =HP 0

13 The MEISINGER LUSTER for Lava TM Ultimate polishing set has been specially developed for use on resin nanoceramic from 3M Espe. The set consists of instruments for extraoral work and polishing CAD/CAM restoration materials. A soft polishing brush that is used with polishing paste and the cotton buff bring the restoration up to an excellent high gloss. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use. Lava TM is a registered trademark of 3M Unprocessed state of a fully anatomical resin nanoceramic crown 95U: Trimming the contact point, Recommended rotary speed: rpm 9507P: Smoothing of the occlusal surface and crown external shape, 9507H: High gloss polishing of the occlusal surface and crown external shape, 9508H: Targeted high gloss polishing, e.g. of fissures, 00: Working the polishing paste into the material surface using a soft polishing brush, Recom. rotary speed: rpm 50: High gloss polishing of the crown with a cotton buff, Result: high gloss by polishing with LUSTER set 3M000 3

14 Other MEISINGER polishing systems LUSTER for CEREC 2605 CEREC Advanced Kit 2609 CEREC Polishing Kit LUS60 LUSTER CEREC JK03 LUSTER CAD / CAM Lab Kit by: Dr. James Klim DDS 2

15 LUSTER for Porcelain LUS4 LUSTER Lab Porcelain Polishing Kit LUS30 LUSTER Intraoral Porcelain Polishing Kit Selection of some providers of fully ceramic CAD/CAM materials Zirconium oxide Lithium disilicate Feldspar ceramic Leucite Hybrid ceramic 3M Espe Lava TM Plus Lava TM Ultimate (nano-ceramic + polymer) Bego BeCe CAD Zirkon HT Dentsply - Celtra TM Duo (zirconium reinforced) Glidewell BruxZir Heraeus Kulzer cara Zr / cara Zrtr cara LiSi Ivoclar Vivadent IPS e.max ZirCAD IPS e.max CAD - IPS Empress CAD - Sirona incoris ZI - CEREC Blocs - - Vita VITA In-Ceram YZ VITA Suprinity (zirconium reinforced) VITABLOCS - VITA Enamic (ceramic + polymer) Lava TM is a registered trademark of 3M BeCe is a registered trademark of BEGO Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG Celtra TM is a registered trademark of DENTSPLY DETREY GmbH BruxZir is a registered trademark of Glidewell Laboratories IPS e.max and IPS Empress are registered trademarks of Ivoclar Vivadent GmbH CEREC is a registered trademark of Sirona Dental Systems GmbH In-Ceram, Suprinity, VITABLOCS and Enamic are registered trademarks of VITA Zahnfabrik H. Rauter GmbH & Co. KG 3

16 MEISINGER polishing systems Top grade CR-Choice affirms outstanding quality Type Product (Company) # of Steps Pieces Finish* Polish in Kit Price Instrument Durability Surface Finish Rating BruxZir Lava Plus IPS e.max Lava Ultimate CR Comments and Key Features Extraoral Intraoral CoreMaster (Shofu) Dialite LD extraoral (Brasseler USA) Dialite ZR extraoral (Brasseler USA) Luster for e.max extraoral (Meisinger) Luster for zirconia extraoral (Meisinger) Pre-market: APPS Outside (Cosmedent) BruxZir Adjustment and Polishing Kit (Glidewell Labs) BruxZir Adjustment and Polishing Set (Axis Dental) Dialite HP intraoral (Brasseler USA) Dialite LD intraoral (Brasseler USA) Dialite ZR intraoral (Brasseler USA) LD / ZR Cut, Finish & Polish (Komet USA) Luster for e.max intraoral (Meisinger) Luster for zirconia intraoral (Meisinger) OptraFine (Ivoclar Vivadent) Pre-market: APPS Inside (Cosmedent) 0 2 $ $ $ Low price Well-established brand Well-established brand 2 5 $ CR-Choice 2 6 $ CR-Choice 2 8 $ Pre-market 3 6 $ Fair - Fair 2 5 $ $ $ $ $ 5.00 Includes finishing Burs Includes finishing Burs Well-established brand Well-established brand Well-established brand Includes finishing Burs 2 7 $ CR-Choice 2 7 $ CR-Choice 2 9 $ CR-Choice, inc. paste 2 8 $ Pre-market!!!! Among all the polishing systems for CAD/CAM materials tested, the two MEISINGER polishing systems - LUSTER for e.max (intraoral and extraoral) and LUSTER for Zirconia (intraoral and extraoral) - scored the top grade. * Instruments indicated for restoration adjustment/reduction Plus autoclavable bur block CoreMaster Coarse also available. Test results were obtained using both types sequentially. 4

17 MEISINGER polishing systems take st place IPS e.max CAD Average Gloss Units (GU) Polisher System ~30 um diamond grind st step 2 nd step MEISINGER Luster LUS 80 Lithium Disilicate Adjusting and Polishing Kit 39.2 (4.0) 56.9 (2.0) 90.8 (.9)! Axis LS-503 CERAGLAZE INTRA-ORAL POLISHING SET 33.8 (3.5) 60.5 (.0) 88.3 (4.7) KOMET LD/ZR Cut, Finish & Polish 30.9 (.8) 39.5 (4.) 89.0 (5.2) BruxZir Zirconia Gloss Units (GU) Polisher System ~30 um diamond grind st step 2 nd step MEISINGER Luster Zirconia Adjusting and Polishing Kit 64.2 (2.8) 5.0 (9.2) 59.4 (3.4)! KOMET LD/ZR Cut, Finish & Polish 64.7 (4.) 74.5 (4.0) 35.4 (3.7) Compared with renowned competitor products, the two MEISINGER polishing systems - LUSTER for e.max and LUSTER for Zirconia - demonstrate the best results. Sources: Clinicians Report, Feb. 203 The Dental Advisor, Jun

18 MEISINGER products in practical testing Test material: lithium disilicate ceramic Wear test Weight loss in % Temperature test Temp. / C after 30 sec ,0 3 2,93 3,46 3,67 30,0 3,64 38,35 33,8 MEISINGER (e.g. DPO06) The graph shows the percentage weight loss between the weight of the delivery state and after 4 x 30 seconds of polishing. The MEISINGER product shows a clearly lower level of wear. Reflection test Reflection value / GU (gloss units) Competitor Determination with the reflected beam from material illumination Competitor 2 20,0 MEISINGER Competitor Competitor 2 (Shape: pointed, e.g. DPO05) The temperature measurement takes place after x 30 seconds of polishing the material test body. MEISINGER products demonstrate more gentle results with the test material than the competitors. Surface roughness test Determination of the mean roughness (Ra) with profile analysis of the material surface Ra 00,0 80,0 The higher the GU value, the better the reflection and the polished finish. 2,5 2,0 60,0,5 40,0 20,0 8,25 42,05,8 34,6,0 0,5 0,58,03,32 MEISINGER (Polishing level 3, e.g. 9749F) Competitor The MEISINGER polishers show a significantly better result in the reflection test than the competitor products. The material processed diplays an excellent gloss finish after processing with a MEISINGER polisher. Competitor 2 MEISINGER Competitor Competitor 2 (Polishing level 2, e.g. DPO05) The result of the surface roughness test shows that the material surface is significantly less rough after polishing with MEISINGER polishers than after polishing with competitor products. 6

19 Test material: zirconium oxide ceramic Temperature test Temp. / C after 30 sec. Reflection test Determination with the reflected beam from material illumination Reflection value / GU (gloss units) 40,0 00,0 80,0 The higher the GU value, the better the reflection and the polished finish. 60,0 30,0 34,62 43,72 35,85 40,0 20,0 75,65 6, 57,4 20,0 MEISINGER Competitor Competitor 2 (Shape: Pointed, e.g. DCA04) The temperature measurement takes place after x 30 seconds of polishing the material test body. With degrees, the MEISINGER products show a very good and more gentle result than the competitor products. Surface roughness test 0,6 0,5 0,4 0,3 0,2 0, Ra 0,26 0,52 0,49 MEISINGER (Polishing level 2, e.g. DCA) Competitor Competitor 2 The material surface after polishing with MEISINGER instruments shows a significantly better result than with competitor products. MEISINGER Competitor Competitor 2 (Polishing level 2, e.g. DCA0) In the reflection test, the MEISINGER polishers are clearly in st place with an outstanding result and leave the competitors way behind. The experiment Aim: To evaluate the performance of two different ceramic test specimens with different polishing systems. Conditions: Unified sample preparation using a grinding wheel. The duration of polishing is 30 seconds per polishing level. Polishing is performed with a rotary speed of rpm Polishing is performed without water or spray cooling. After polishing, the test specimens are rinsed with clear tap water and dried with compressed air. Result: All results represent the respective calculated mean value for the instrument tested. In comparison with the competitors, the MEISINGER products boast advantages across the board and take st place in all categories! Source: data on file (203) 7

20 Hager & Meisinger GmbH Hansemannstr Neuss Germany Phone: Fax: info@meisinger.de Internet: Meisinger USA. L.L.C E. Easter Avenue Centennial, Colorado 802 USA Phone: + (303) Toll free: + (866) Fax: + (303) info@meisingerusa.com Internet: 85BRCADCAME - 03