Abrasive materials can be 2 types: natural and synthetic. (Tables 2,3) Table 2. Natural abrasive materials. Types Source Application Moh s
|
|
- Sharleen Harrison
- 5 years ago
- Views:
Transcription
1 ANNOTATION TO THE LESSON 9 Proper finishing and polishing is important for shaping, contouring and removing surface irregularities in restorations in order to avoid plaque accumulation, gingival irritation, surface staining thus providing functional occlusion & esthetics. The process of finishing a restoration involves abrasive wear through the use of hard particles. The finishing and polishing of restorative dental materials are important steps in the fabrication of clinically successful restorations. Abrasion is the process of wear on the surface of one material by another material by scratching, gouging, chiseling, tumbling, or other mechanical means. The material that causes the wear is called an abrasive; the material being abraded is called the substrate. The process of abrasion is affected by the physical and mechanical properties of the material being abraded. Properties such as hardness, strength, ductility, and thermal conductivity are important. Hardness - resistance to permanent indentation on the surface. Brinell and Knoop hardness values are functions of a material's resistance to indentation, whereas Mohs values indicate one material's resistance to scratching by another. (Table 1) Table 1. Mohs hardness of dental abrasives. Abrasive materials can be 2 types: natural and synthetic. (Tables 2,3) Table 2. Natural abrasive materials. Types Source Application Moh s
2 hardness Arkansas stone Siliceous sedimentary rock mined in arkansas Fine grinding of enamel & metal alloys Chalk Calcite, calcium carbonate Polish tooth enamel,gold foil, amalgam and plastic materials 3 Corundum (White stone) Minerals forms of aluminum oxide in white Grinding metal alloy 9 Natural Natural diamond (Super Abrasive) Transparent colorless hardest mineral, composed of carbon Used on Ceramic and Resin based composite structure 10 Emery Grayish black corundum in fine grain Finishing metal alloys or acrylic resin 7-9 Quartz Very hard, colorless and transparent Finish metal alloys and grind dental enamel 7 Table 3. Synthetic abrasive materials Types Source Application Moh s hardness
3 Silicone carbide First synthetic abrasive Cutting of metal alloys, ceramics and acrylic resin materials 9-10 Aluminium oxyde Aluminia Sandblasting and finishing base metal alloy, resin based and composite material, polishing paste 9 Synthetic diamond Natural diamond Grind tooth structure, ceramic, resin materials. As polishing paste. 10 Synthetic Rouge Iron oxyde Polish high noble metal alloys 5-6 Tin oxyde Tin oxide as fine abrasive Polishing agent for teeth and metallic restorations 6-7 Characteristics of dental abrasive instruments. Abrasive instrument consists from bonded to its surface hard filler particles. Factors affecting rate of abrasion: 1. Type of the abrasive material 2. Size of the abrasive
4 By convention, particles are classified as fine (0 to 10 µm), medium (10 to 100 µm), and coarse (100 to 500 µm), according to the average particle size of the sample. Larger abrasive particles will abrade a surface more rapidly than will smaller particles. 3. Pressure of the abrasive against substrate 4. Speed at which the abrasive moves against substrate. 5. Irregularity in shape of the abrasivemore irregular particles, greater efficiency Types of abrasive instruments. Abrasives are nonbladed instruments used to finish and polish restorations and appliances. Some abrasives are also used for cutting. Abrasives come in a wide variety and are categorized by their shapes such as discs, points, and wheels. Abrasives are also categorized by the materials they are made of, such as rubber, stone, and sandpaper. Some restorative materials come with select abrasives that are designed to give the restoration a premium finish. Abrasive instruments can be mounted (Fig.1, a) or unmounted. (Fig. 1, b). Figure 1. Types of abrasive instruments. А b For fixation of unmounted abrasive instruments mandrels are used. Mandrels are rods of various lengths that are used in low-speed handpieces with various abrasives. Mandrels are available in three shanks: latch, friction grip, or straight. The head of the mandrel, where the abrasives attach, is available in snap on, screw-on, or pin designs. (Fig. 2)
5 Figure 2. A- screw-type mandrels, B- snap-on mandrels FINISHING process by which a restoration is contoured to remove excess material and produce a reasonably smoother surface. POLISHING refers to the final removal of material from a restoration resulting in a very smooth highly reflective surface which does not contain scratches. Carborundum Discs. Carborundum discs, also known as Jo-dandy discs and separating discs, are thin, brittle discs that break easily. They are double-sided and are used primarily in the dental laboratory to cut and finish gold restorations, but they can be used intraorally as well. (Fig. 3,b) Figure 3. A- rubber wheel, B- carborundum discs Stones Stones are available in many sizes, shapes, and grits, similar to discs. They are used for cutting, polishing, and finishing amalgam, gold, composite, and porcelain restorations. Stones are used in the laboratory to adjust and polish appliances and custom trays. The type of abrasive material and the grit control the cutting or polishing action of the stone. The abrasive materials include silicon carbide, garnet, and aluminum oxide. Stones may be mounted or unmounted. Some stones are considered heatless, thereby allowing the operator to polish a restoration without creating frictional heat.
6 Rubber Wheels Wheels are made of rubber material impregnated with an abrasive agent. They come mounted and unmounted and are available in various grits. They are used for finishing and polishing (Fig. 3-a). Rubber Points Rubber points come in a variety of sizes and grits. They are made of rubber material impregnated with abrasive agents. Points are used to polish and are especially adaptable when defining anatomy in the restoration. (Fig.4) Figure 4. Various points, cups, and wheels to define, polish, and finish composite restorations. Coated Disks Are used for contouring of an irregular surface to produce a smooth flat or convex contour on incisal edges, embrasures and to a limited extent on posterior surfaces. Coated disks are available in different diameters. Disks may be attached to a mandrel. Advantage of this type is that the mandrel does not interfere with the working area but its movement is limited to a forward motion only (Fig.5) Figure 5. Coated disks Coated Strips Strips are used to smooth and polish the proximal surfaces of all bonded restorations. Available in metal or plastic backing and with different abrasives. Metal strips are used in very tight contact areas of ceramic, composites and amalgam restorations, but care must be taken to avoid lacerating the gingival tissues.plastic strips are used for composites, compomers, hybrid ionomers,
7 and resin cements. These strips are used by hand in a back and forth motion. (Fig. 6). Figure 6. Coated strips Polishing pastes. Also called as nonbonded abrasives or polishing pastes. Primarily used for final polishing, need to be applied to the substrate with a nonabrasive device such as synthetic foam, rubber, felt or chamois cloth. Most popular loose abrasives are aluminium oxide and diamonds. Paste Particle size Purpose Condition Aluminium oxide 1µm and 0,3µm Polishing of composite resin material Diamond 3-4µm and 1µm Polishing of composite and ceramic material Wet Dry Number coding system for dental rotary instruments. ISO 6360 provides a general number coding system for all types of dental rotary instruments, including accessories used in connection with these rotary instruments. The benefits of this system for dentistry in its entirety will only be derived if the system is widely adopted; manufacturers of dental instruments, as well as the dental trade, are therefore requested to refer to ISO 6360 in their catalogues. This part of ISO 6360 was prepared in response to a need by the dental trade and industry and the dental profession for a universal system of classification and designation for these instruments. It establishes a comprehensive number coding system suitable for all dental rotary instruments by use of a 15-digit code number identifying general and specific characteristics of instruments or groups of instruments. The first group of three digits identifies the materials used for the working part of instruments. The second group of three digits identifies the shanks and handles used for instruments and the overall lengths of instruments.
8 The third group of three digits identifies the shapes of instruments. The fourth group of three digits identifies the specific characteristics for groups of instruments. The fifth group of three digits identifies the nominal diameter of the working part of the instruments. The code numbers are generic code numbers. They do not provide exact product information. This information is given in the respective product standards for dental rotary instruments. Samples of number coding. А БВ Г Д The material of head Handpiece that it fits (diameter and length) Form or shape of head Diameter of head
9 Tungsten carbide For angle handpiece (Ø 2,35 mm,length 22 mm) Round 2,4 мм ISO Grainding, µm Color coding of the shank Notes ISO White Ultra fine (UF) Yellow Extra fine (EF) Red fine (F) medium (M) Green coarse(g) более Black Extra coarse (EG) Common features of the burs:
10
Finishing. Separating and grinding discs. Supercut ST separating discs. Supercut separating discs for ceramic
Separating and grinding discs Supercut ST separating discs maximum cutting efficiency minimal breakage risk excellent strength nylon reinforced quality Color: brown Recommended speed: 15000 min -1 Maximum
More informationABRASIVES. Plus the New Pozzi Malibu Series! 3 Separate Product Lines
ABRASIVES 3 Separate Product Lines Plus the New Pozzi Malibu Series! Since 1971 Abrasives! Mandrels! Pozzi Has Them All! A wide selection of mounted and unmounted points, discs and wheels for operatory
More informationNATION S FINEST ABRASIVES; BEST PRICES
NATION S FINEST ABRASIVES; BEST PRICES WE GUARANTEE 100% SATISFACTION AT ALL TIMES! Prices Are Below! ITEM No. DESCRIPTION & SIZE GRINDING MOUNTED STONES ViaGrind *GREEN, PINK, BLUE *VG-VB-VP 1-12 *SELECT
More informationLASCO DENTAL PRODUCTS CATALOG
Manufacturing quality diamond instruments in the USA for over 40 years. LASCO DENTAL PRODUCTS CATALOG CALL TOLL FREE 1-800-621-4726 9950 Canoga Ave. #A8 ~ PO Box 4657 ~ Chatsworth, CA 91311 (818) 882-2423
More informationFINISHING & POLISHING
Polishing Kits Composite SUPER-SNAP SINGLES (Shofu) Refill Kit 48/pkg $159.95 Sof-lex Discs (3M ESPE) #1980: Contouring & Polishing Kit 120 discs in 1/2 and 3/8 diameters + one mandrel 440-1010 $162.95
More informationInterproximal Reduction
Interproximal Reduction 10.0 mm 10.0 mm 1.0 mm 0.39 mm Fine Grit Long Item #: 8859-31-010 1.0 mm 0.45 mm Medium Grit Long (Blue Color ID) Item #: 859-31-010 1 pack... $ 46.95/pk 3 or more... $ 44.95/pk
More informationPowered cutting equipment. Straight Handpiece Contra-angle Handpiece Air Turbine Handpiece
Lec.3 أ.م. مثنى شعبان رجب Powered cutting equipment Handpiece: Is a device for holding rotary instruments, transmitting power (Source of power is motor or air) to them, and for positioning them intraorally.
More informationThe choice of dental professionals worldwide.
PRODUCT CATALOGUE The choice of dental professionals worldwide. TABLE OF CONTENTS CLINICAL RA - STEEL SHANK MULTI-USE PAGE PRODUCT APPLICATION FLEXIBILITY MULTIPLE MATERIALS 8 KENDA NOBILIS For Composites,
More informationABRASIVES. Buffalo Dental Manufacturing Company, Inc.
ABRASIVES Buffalo Dental Manufacturing Company, Inc. www.buffalodental.com 2 Abrasives, Blue Mounted Points Blue mounted points ideal for trimming and finishing dentures, temporaries and restorative materials.
More informationGrinding and polishing discs COMBIDISC Corundum A Abrasive disc holders
. Grinding and polishing tools //.9. Emery and fleece tools Grinding and polishing discs COMBIDISC Corundum A Abrasive disc holders Abrasive discs COMBIDISC corundum A Dimensions Grit size Recommended
More informationFinishing Strips REALITY S CHOICES. Metal. Plastic
REALITY S CHOICES Metal 1a. NTI Serrated Diamond Axis 1b. Visionflex Diamond Strips 2a. Compo-Strips Premier 2b. FlexiDiamond 2c. Gateway Diamond. Metal Strips Plastic 1. Epitex 2. FlexiStrip. Sof-Lex
More informationFinishing Process. By Prof.A.Chandrashekhar
Finishing Process By Prof.A.Chandrashekhar Introduction Finishing process are different from other manufacturing processes. The distinction between the finishing processes and other manufacturing processes
More informationSandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value
Sandpaper Product Guide Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Index Introduction to Abrasives Abrasive Components... 3 Sandpaper
More informationMILLING and GRINDING MACHINES Machine Tools
ELEMENTS OF MECHANICAL ENGINEERING PART B UNIT VI MILLING and GRINDING MACHINES Machine Tools 1 Objectives: 1.1 To understand the Principle of working of Milling, Horizontal & Vertical Milling. 1.2 Classification/Types
More informationDIAMOND TOOLING FOR COMPOSITE MATERIALS P.B.S. DIAMOND TOOLING PCD TOOLING FLEXIBLE DIAMOND TOOLING
DIAMOND TOOLING FOR COMPOSITE MATERIALS P.B.S. DIAMOND TOOLING PCD TOOLING FLEXIBLE DIAMOND TOOLING Abrasive Technology s diamond tooling is perfectly suited for composites as it provides comprehensive
More informationFINISHING & POLISHING GUIDE
FINISHING & POLISHING GUIDE www.clinicianschoice.com Indicated for COMPOSITE, CERAMICS, BISACRYL AND DENTURE ACRYLIC Indicated for ALL CERAMICS ALL S URFACE ACCESS POLISHERS ONE SHAPE. ALL ACCESS. UNLIMITED
More informationDIAMOND TOOLING FOR COMPOSITE MATERIALS P.B.S. DIAMOND TOOLING PCD TOOLING FLEXIBLE DIAMOND TOOLING
DIAMOND FOR COMPOSITE MATERIALS P.B.S. DIAMOND PCD FLEXIBLE DIAMOND P.B.S. DIAMOND First patented by Abrasive Technology in 1975, this original brazed bonding process chemically bonds superabrasive crystals
More informationReliable solutions with optimised performance
Reliable solutions with optimised performance 3M innovation provides quality you can count on in a full line of premium engineered abrasives and convenient all-purpose abrasive products for use in stock
More informationSilicone Carbide CN1 CN2 CN3 CY2 CY3 CY4 FL1 FL2 FL3 FL4 FL5 IC1 IC2 IC3 IC4 IC5 IC6 IC7 IC8 IC9 KN1 KN2
SHOFU & DLS MOUNTED STONES Green Mounted Stones (For Porcelain, Gold & Other Alloys) Silicone Carbide Dura-Green Mounted Stones (Shofu) Made of high quality silicone carbide grits. Fast contouring and
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationFlexible Diamond Disc
Diamond Burs - with 2.37mm HP Shanks The abrasive properties of Diamond bonded to the tool ensure fast, easy action & long durability. Used for engraving, drilling, cutting, cleaning castings, etc. Always
More informationPOWER TOOL ACCESSORIES
POWER TOOL ACCESSORIES SUPER PREMIUM CHALLENGER SEGMENTED SAW 100% hot press Anti clog bond system High premium treated diamonds Effortless fast cutting Segmented 105 1.8 X 8 20 Super Hard Granite and
More informationBETACORD offers its partners a product manufactured from the best raw materials using the most-up-to-date equipment.
Dear partners! We are proud to introduce a new European brand of abrasives and accessories BETACORD. BETACORD offers its partners a product manufactured from the best raw materials using the most-up-to-date
More informationO N T H E C U T T I N G E D G E O F T E C H N O L O G Y
A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer
More informationDIAMONDS. TWO STRIPER DIAMONDS - Distinctly Different MICRO-PREP DIAMONDS BEVELED CYLINDER CURETTAGE K
109 7351 TWO STRIPER - Distinctly Different Only the Two Striper from Premier is manufactured with the patented P.B.S. diamond-particle bonding process. Other diamond burs are electroplated. P.B.S.-bonded
More informationFinishing & Polishing
Polishing Products Sof-Lex Finishing Discs-3M Standard Paper w/ Round Center -85 Discs 3/8 1981C...Coarse 1981M... Medium 1981F...Fine 1981SF...Super Fine 1982C...Coarse 1982M... Medium 1982F...Fine 1982SF...Super
More informationThe manufacture of abrasive articles or shaped materials containing macromolecular substances, e.g. as bonding agent, is covered by C08J5/14.
CPC - B24D - 2016.11 B24D TOOLS FOR GRINDING, BUFFING, OR SHARPENING (tools for grinding or polishing optical surfaces on lenses or surfaces of similar shape B24B 13/01; grinding heads B24B 41/00; manufacture
More informationFEATHER LITE POLISHERS
FEATHER LITE POLISHERS LEAVES AN ENAMEL-LIKE FINISH RECREATES SURFACE DIFFERENTIATION ADAPTS TO MOST TOOTH SURFACES CERAMICS COMPOSITES BY YOUR SIDE Dialite Feather Lite polishers offer all-inclusive polishing
More informationOurVision SHOFU Dental Asia-Pacific Pte. Ltd.
Our Vision We are one of the leading dental manufacturers deeply committed to meeting our customers needs through leading edge research and the highest quality standards. Beautiful teeth are considered
More informationDental Lab Accessories
Dental Lab Accessories FOREDOM Dental Lab Accessories Page Carbide Burs and Sleeves Typhoon Sleeves and Mandrels 2 Typhoon Burs 2 Miniature Carbide Burs 8 Brass Brush (for cleaning Typhoons) 1 Abrasives
More informationProduct Range. Solutions for Industry.
Product Range Solutions for Industry www.master-abrasives.co.uk Introduction Master Abrasives has a hard and long earned reputation in the UK abrasives market for providing solutions with high quality
More informationSURFACE CONDITIONING CUTTING ABRASIVES
SURFACE CONDITIONING CUTTING ABRASIVES 399 ABRASIVES SURFACE CONDITIONING POWERBLEND 503515 POWERBLEND SCD Flap Disc Surface Conditioning Super High Performance (for Angle Grinders) POWERBLEND SCD flap
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT IV SURFACE FINISHING PROCESS Grinding Grinding is the most common form of abrasive machining. It is a material cutting process which engages an abrasive tool whose cutting
More informationInterproximal Reduction and Separation
Interproximal Reduction and Separation Our Strength is our Service Ortho-Care (UK) Ltd. Facsimile: 01274 734446. Website: www.orthocare.co.uk. Email: info@orthocare.co.uk 17 AIR ROTOR STRIPPING - Adult
More informationAbrasives 31. Abrasives. ACCESSORIES Rubber Slotted Expander Wheels Slotted wheels for use with evenrun bands.
215587 Pages 30-39 7/21/03 2:57 PM Page 30 3M Evenrun Bands Aluminum oxide bands are made of high-grade mineral and a bonding system which reduces shelling of the mineral. Economical abrasive bands for
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationTraditional Grinding & Polishing
Traditional Grinding & Polishing Grinding Wheels 3.2 Discs 3.4 Polishing & Buffing Powders 3.5 Felt Buffers 3.7 SECTION 3 Grinding Wheels RADIAC / NATIONAL SILICON CARBIDE WHEELS A high quality, made in
More informationcontents Johnson-Promident University What is a Rotary Dental Instrument?...1 Carbide Burs...9 Carbide Burs vs. Diamond Burs...3 Diamond Burs...
TABLE OF CONTENTS Johnson-Promident is proud to now be your one-stop shop for all rotary instruments. Nowhere else on earth will you find as comprehensive a selection as we offer, from carbides to diamonds
More informationGrinding. Vipin K Sharma
Grinding Grinding It is a material cutting process which engages an abrasive tool(in the form of a wheel) whose cutting elements are grains of abrasive material known as grit. These grits are characterized
More informationEDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives
EDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives Our commitment to our customers is set in stone. About Us For nearly forty years BORIDE Engineered Abrasives has developed
More informationAdvised RPM 50x100x19 AC AM AF AVF x100x19 AC AM AF AVF x110x19 AC AM AF AVF
KEY WAY FLAP brushes FOR METAL WORKING COATED ABRASIVE KWF KWF with flexible coated abrasive flaps for rust removal, welding marks, oxidations and masking of metal surfaces. 2988 corundum cloth easily
More informationCOLD MOUNTING SYSTEM FAST, SIMPLE, EFFICIENT
COLD MOUNTING SYSTEM FAST, SIMPLE, EFFICIENT SCAN-DIA COLD MOUNTING SYSTEM From the beginning of the company s history, SCAN-DIA has favoured cold mounting and developed the internationally known SCAN-DIA
More informationSima Diamant has inaugurated its new European factory of diamond blades, equipped with stateof-the-art technology on all its manufacturing processes and with the philosophy of producing diamond tools able
More informationNON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM)
NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM) A machining process is called non-traditional if its material removal mechanism is basically
More informationMidwest Carbide & Diamond Burs
Midwest Carbide & Diamond Burs Midwest Carbide Burs Operative Carbide Burs Exceptional cutting performance. Extensive selection of shapes and sizes in familiar configurations to meet your clinical needs.
More informationRoughing vs. finishing
Finishing methods Roughing vs. finishing Roughing removing material as fast as possible, without special demands on surface and low demand on precision high Q, high IT, high Ra Finishing making final surface
More informationChapter 26 Abrasive Machining Processes. Materials Processing ABRASIVE MACHINING 10/11/2014. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 26 Abrasive Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing Chapters
More informationThe World of Jöst abrasives
The World of Jöst abrasives useit-abrasives m a d e b y J Ö S T The brand for high-quality abrasives Almost dust-free - quick and effective suction removal of sanding dust With the development and patenting
More informationBRUSHES WITH SHANK 60 61
60 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0. 0.0 STH 0.0 0.00 ROH 0.0 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 7 9 /8 /8 8,000 0 7.98.
More informationGrinding with style. -Abrasive web belts for fine grinding metal
A b r a s i v e s Grinding with style. -Abrasive web belts for fine grinding metal All s well that ends well -Abrasiv 3 benefits of webrax abrasive web belts 1. The backing Our abrasive web belts are manufactured
More informationMasterpiuma3 Glass &Tile Cutters:
Masterpiuma3 Glass &s: 2414 Converse Street Dallas, Tx 75207 T: 972-386-4900 F: 214-447-9581 Conceptsurfaces.com Lead Time: 1-2 Weeks/ Free Shipping for orders of $1,500 or more. 44P3 17-1/4 Can cut all
More informationSolid Surfaces. Sanding and polishing solid surface materials chemical-concepts.com
Solid Surfaces Sanding and polishing solid surface materials.800.220.966 chemical-concepts.com Classic solid surfaces Classic solid surfaces Application recommendations for classical solid surface materials.
More informationWhite paper. Exploring metal finishing methods for 3D-printed parts
01 Exploring metal finishing methods for 3D-printed parts 02 Overview Method tested Centrifugal disc Centrifugal barrel Media blasting Almost all metal parts whether forged, stamped, cast, machined or
More informationROTARY TOOLS. Spring Health Products, Inc. 705 General Washington Avenue, Suite 701 Norristown, PA HEALTH PRODUCTS
HEALTH PRODUCTS ROTARY TOOLS Spring Health Products, Inc. 705 General Washington Avenue, Suite 701 Norristown, PA 19403 Phone: 610-630-9171 Toll-Free: 1-800-800-1680 Fax: 610-630-9730 www.springhealthproducts.com
More informationMedia for mass-finishing-processes
Media for mass-finishing-processes Dierk Telljohann Dipl.-Ing- (FH-D) OTEC Präzisionsfinish GmbH Dieselstrasse 8-12 75334 Straubenhardt www.otec.de Table of content: - Chips - Grinding- and polishing-granules
More informationProsthetics. Well-proven product quality. Dentaurum. shop.dentaurum.com
. Well-proven product quality. Dentaurum Online Shop shop.dentaurum.com 249 From impressions to grid strengtheners. A diverse range of products available for impression taking and model casting to various
More informationSEMI MAGNETIC ABRASIVE MACHINING
4 th International Conference on Mechanical Engineering, December 26-28, 21, Dhaka, Bangladesh/pp. V 81-85 SEMI MAGNETIC ABRASIVE MACHINING P. Jayakumar Priyadarshini Engineering College, Vaniyambadi 635751.
More informationElectro plated Standard Diamond and CBN Grinding Pins, Wheels and Cutting Discs
Electro plated Standard Diamond and CBN Grinding Pins, Wheels and Cutting Discs Price List S04/2017 1929 1 The QR-Codes lead you directly to our Online-Shop! All prices are per piece, ex works. 2 Table
More informationINTRODUCTION TO GRINDING PROCESS
GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding
More informationBurs make the difference! To be used where the surgeon requires high precision and safety!
Burs make the difference! To be used where the surgeon requires high precision and safety! When choosing rotary instruments, the following criteria are important: Sharpness Precision Safety Economical
More informationBurnishing machine TRINOXFLEX Set. BSE Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Burnishing machine TRINOXFLEX Set BSE 4-3 00 Set 433.438 Power input 400 watt Power output 880 watt Max. tool Ø 25 Tool width 00 Tool
More informationTECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH
TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH MICRO-MESH finishing belts provide desired surface qualities and economic benefits to many types of finishing operations, and are available in a range
More informationCLOTH AND PAPER SHEETS
Cloth Sheets Engineered for maximum flexing and fast cutting, cloth sheets have a longer life than paper sheets. They tear cleanly and straight without shedding and are packed in a protective dispenser
More informationCREATIVE TECHNOLOGY. Products Guide GRINDING WHEELS DRESSER VITRIFIED CBN WHEELS DIAMOND WHEELS & TOOLS PERIPHERAL EQUIPMENTS & RELATED PRODUCTS
CREATIVE TECHNOLOGY Products Guide GRINDING WHEELS DRESSER VITRIFIED CBN WHEELS DIAMOND WHEELS & TOOLS PERIPHERAL EQUIPMENTS & RELATED PRODUCTS Diprotex meets all your grinding and polishing requirements,
More informationINDASA has a range of products that covers all coated abrasive needs for the Automotive Refinishing Industry and other Industrial applications.
Product Range INDASA has a range of products that covers all coated abrasive needs for the Automotive Refinishing Industry and other Industrial applications. Our sales figures and international presence
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel
More informationA TRADITION OF QUALITY SINCE 1966 DIAMOND AND CBN WHEELS
A TRADITION OF QUALITY SINCE 1966 DIAMOND AND CBN WHEELS POLTAVA DIAMOND TOOLS has been manufacturing top-quality diamond tools for the machine building, glass, electronic and woodworking industries since
More informationHigh performance in water starved environment
wetdry Diamond Mini Hole Saw High performance in water starved environment a unique product that requires minimal coolant, no guiding and fast and easy slug ejection Ideal for very hard tiles, glass and
More informationTechnique for the Spacer (bonding) Retention Cap
800-232-7732 www.preat.com Technique for the Spacer (bonding) Retention Cap Benefits: o o Provides option to veneer directly to the removable partial denture metal frame for improved esthetics. The first
More informationPRODUCT CATALOGUE FOR GLASS ENGRAVERS
PRODUCT CATALOGUE FOR GLASS ENGRAVERS POLPUR, LTD. FOUNDED IN 1991, IS WHOLLY A CZECH COMPANY. We develop and produce polishing, lapping and grinding tools, especially for the glass, jewellery and optical
More informationUltrasonic Machining. 1 Dr.Ravinder Kumar
Ultrasonic Machining 1 Dr.Ravinder Kumar Why Nontraditional Processes? New Materials (1940 s) Stronger Tougher Harder Applications Cut tough materials Finish complex surface geometry Surface finish requirements
More informationSURFACE FINISHING GRINDING MACHINES
SURFACE FINISHING GRINDING MACHINES Introduction :- Grinding is a metal cutting operation which is performed by means of a rotating abrasive wheel acts as a cutting tool. Material removal is in the form
More informationFinishing Diamonds REALITY S CHOICES
REALITY S CHOICES 1. Esthetic Trimming (ET) Diamonds Brasseler 2. TDF NTI/Axis 3. Two Striper MFS Premier 4a. BluWhite Composite sds/kerr 4b. T & F Hybrid Points Shofu 2005 REALITY Publishing Co. Vol.
More informationElimination of Honing Stick Mark in Rack Tube B.Parthiban1 1, N.Arul Kumar 2, K.Gowtham Kumar 3, P.Karthic 4, R.Logesh Kumar 5
Elimination of Honing Stick Mark in Rack Tube B.Parthiban1 1, N.Arul Kumar 2, K.Gowtham Kumar 3, P.Karthic 4, R.Logesh Kumar 5 Assistant Professor, Dept. of Mechanical Engineering, Jay Shriram Group of
More informationHand Sanding. 4 ALI INDUSTRIES, INC. :: Sanding Sheets
Hand Sanding :: Sanding Sheets :: Sanding Sponges :: Zip Sander :: Sanding Tools :: Synthetic Steel Wool 4 ALI INDUSTRIES, INC. www.gatorfinishing.com Hand Sanding Hand Sanding Hand sanding products from
More informationAccessories for the Model 920 Lapping and Polishing Machine
Accessories for the Model 920 Lapping and Machine Applications Laboratory Report Introduction polishing is a common practice in many materials preparation laboratories. Instrumentation for materials processing
More informationKrystee s Obsidian Tumbling Recipe
Krystee s Obsidian Tumbling Recipe For this presentation I am using Midnight Lace Obsidian from Oregon. Obsidian is natural volcanic glass. It is a soft stone with a Mohs of 5-5.5. Definition of Obsidian
More informationTOPOGRAPHY & ROUGHNESS TESTING OF SANDPAPER SURFACE
TOPOGRAPHY & ROUGHNESS TESTING OF SANDPAPER SURFACE Prepared by Benjamin Mell 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2010
More informationCUTTING AND ABRASION - by John Falkner-Heylings BSc (Podiatric Medicine), DipPodM, FPSPract
CUTTING AND ABRASION - by John Falkner-Heylings BSc (Podiatric Medicine), DipPodM, FPSPract INTRODUCTION A considerable proportion of our clinical time is expended in trimming and shaping the nailplate
More informationSince Finishing Stones. for Mold & Die Polishing. Abrasive Solutions for Metalworking Industries
Since 1914 Finishing Stones for Mold & Die Polishing Abrasive Solutions for Metalworking Industries Gesswein Finishing Stones for Mold & Die Polishing For over 95 years, leading metalworkers have come
More informationCommonwealth of Pennsylvania PA Test Method No. 517 Department of Transportation October Pages LABORATORY TESTING SECTION. Method of Test for
Commonwealth of Pennsylvania PA Test Method No. 517 Department of Transportation 10 Pages 1. SCOPE LABORATORY TESTING SECTION Method of Test for DETERMINATION OF ACCELERATED POLISH OF COARSE AGGREGATE
More informationBONDED ABRASIVE PRIMER
BONDED ABRASIVE PRIMER Basic information on the terminology and use of bonded abrasive products. Property of: KASCO ABRASIVES Coldwater, Michigan 1-800-367-729 Fax 517-279-7265 1 GENERAL BONDED ABRASIVES
More informationDIAMAG GRIND & POLISH SYSTEMS
CONCRETE GRINDING & POLISHING TOOLS 2016 DIAMAG GRIND & POLISH SYSTEMS BMG-435 BMG-535 / BMG-580 BMG-735 / BMG-780 PDG8000/HTC800 Lavina Quick Release DIAMAG Plates E07155 E07185 DIAMAG Adapter Plate BMG-435
More informationRIM 3 Wheel For wet and dry grinding. AC TURBO Wheel For wet and dry grinding. AC SWIRLY Wheel For wet and dry grinding
Diamond Tools RIM 3 Wheel For wet and dry grinding Ø 100 # 36, 50, 80, 120, 220 SF, M14 80.00 AC TURBO Wheel For wet and dry grinding Diameter Grits Connection Shape Price 02005 88.00 Ø 100 # 36, 50, 80,
More informationWashability, Brushability & Abrasion Testers Washability, Brushability & Abrasion Testers Elcometer 1730 Car Wash Simulator
www.elcometer.com Improved mechanical resistance is part of today s quality requirements. One important criteria for assessing this feature is abrasion resistance. Depending on the nature and purpose of
More informationFibratex Convolute Wheels
Clean and Finish Convolute Wheels Soft, conformable Open-mesh Consistent finish Reduced loading An open-mesh product for cleaning and finishing operations. These wheels are: used with light/moderate pressure
More informationWoodworking & Solid Surface Finishing Products
Woodworking & Solid Surface Finishing Products Abrasives for the Wood Industry Engineered for the woodworking professional. Mirka surface finishing products and solutions are used throughout the woodworking
More informationPrima Dental World leaders in precision dental instruments
Prima Dental World leaders in precision dental instruments WORLD LEADERS IN PRECISION DENTAL INSTRUMENTS Prima Dental is a precision dental instruments company that supports its distributors with leading
More informationP n e u m a t i c To o l A c c e s s o r i e s INDUSTRIAL
P n e u m a t i c To o l A c c e s s o r i e s INDUSTRIAL 01 Velcro Sanding Paper & Self-Adhesive Type SANDING PAD & PAPER MSA-082 1/2 Velcro Sanding Pad Spindle Thread: M10 MSA-092 3/4 Velcro Sanding
More informationPOWER CARVERS/ACCESSORIES
16 POWER CARVERS/ACCESSORIES Foredom Tools and Accessories Foredom No. 8 handpiece - slim handpiece. Chuck guard sleeve protects fingers and permits close work. Slides back when changing accessories. Includes
More informationWENDT USA, LLC Wendt USA, LLC Wendt USA, LLC
WENDT USA, LLC Over the next year, you will see a change to our new company logo. We will be rolling it out in our literature, packaging and our forms. You are getting the same high quality product you
More informationOVERVIEW - DUALTREAT GRINDING MACHINES VACUUMS BURNISHERS GRINDING TOOLS. BECO TREAT APS - Nebelvej Horsens (Denmark)
OVERVIEW - DUALTREAT GRINDING MACHINES VACUUMS BURNISHERS LAVINA GRINDING MACHINES X-SERIES L20N-X / L25-X / L30G-X / L32-X LAVINA grinding machines are well known for their long lasting reliability. They
More informationO N T H E C U T T I N G E D G E O F T E C H N O L O G Y
A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer
More informationQUARTZ FABRICATION MANUAL
QUARTZ FABRICATION MANUAL Quartz Fabrication Manual Rev. 1 Page 1 of 26 TABLE OF CONTENTS Product Description. 3 Slab Inspection.. 4 Fabrication Equipment.. 6 FABRICATION TIPS Cutting The Slab. 7 General
More informationInstructions for use
Instructions for use i-motion e-press issued August 2014-1 - Instructions for use i-motion e-press in VITA * classical- und special colors Material and Indication The i-motion e-press pressable ingots
More informationABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials
ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.
More informationChapter 28: Abrasive Machining Processes. DeGarmo s Materials and Processes in Manufacturing
Chapter 28: Abrasive Machining Processes DeGarmo s Materials and Processes in Manufacturing 28.1 Introduction Abrasive machining is the process of using abrasive grit to remove material at high cutting
More informationTrade of Metal Fabrication. Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2
Trade of Metal Fabrication Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module 1
More informationThe main features of quality twist drills made out of high speed steel (HSS) are:
drill bits mounted drill bits on 2.35mm shanks Busch Mounted Drills (On 2.35mm Shank) Shank Drills 1pc each 6pcs+ each 971 010 0.50mm 1.63 1.25 971 020 0.60mm 1.63 1.25 971 040 0.70mm 1.63 1.25 971 030
More informationSharpening Woodworking Tools. Mike Leadbeater Stu Thomson & Mort Cartridge April 2018
Sharpening Woodworking Tools Mike Leadbeater Stu Thomson & Mort Cartridge April 2018 Oversharpening? In my view, whereas hand-tools cannot be too sharp, the relatively coarse ground edge achieved by grinding
More information