Metal Protection Colour Guide When metal protection really matters

Size: px

Start display at page:

Download "Metal Protection Colour Guide When metal protection really matters"

Felix Griffith
6 years ago
Views:

1 Metal rotection Colour Guide When metal protection really matters Wattyl Killrust 1

surfaces from the harsh Australian climate.

.. 2 Understanding the Wattyl Killrust 3 Step System... 3 Killrust reparatory roducts.

.. 8 Killrust Roof aint... 9 Killrust Hammered Metal Finish... 9 Killrust High Heat Enamel.

2 Wattyl Killrust is the tried and trusted brand in metal protection For more than 40 years, Killrust has been a leader in high quality preparatory and topcoat paints that protect metal surfaces from the harsh Australian climate. That s why Killrust is Number 1 in metal protection. Contents Why Choose Killrust... 2 Understanding the Wattyl Killrust 3 Step System... 3 Killrust reparatory roducts... 4 Killrust riming roducts... 5 Killrust Epoxy Gloss Enamel... 6 Killrust Satin Enamel... 8 Killrust Roof aint... 9 Killrust Hammered Metal Finish... 9 Killrust High Heat Enamel... 9 Killrust Woodstove Enamel... 9 rotecting Metal Surfaces Using the Killrust System Metal Guide Killrust Quick roduct Reference Guide Wattyl Killrust

Understanding the Wattyl Killrust 3 Step System Killrust has been specifically

metal, clean steel and The result is a stable metal surface which is better

Killrust primers enhance adhesion and inhibit rust to fight corrosion and create a

The Killrust primer range contain rust inhibiting pigments to chemically fight rust,

They have excellent adhesion properties and provide a sound base for topcoating.

3 Understanding the Wattyl Killrust 3 Step System Killrust has been specifically formulated to offer the ultimate in metal protection through the Wattyl Killrust 3 step system. This system will protect, rejuvenate and beautify your metal surfaces by following the 3 easy steps. Killrust offers superior solutions for preparing rusted metal, clean steel and difficult to reach surfaces. The Killrust preparatory range provides superior solutions for preparing rusted metal, clean steel and difficult to reach surfaces. The result is a stable metal surface which is better prepared for topcoating. Killrust primers enhance adhesion and inhibit rust to fight corrosion and create a protective barrier for greater metal protection. The Killrust primer range contain rust inhibiting pigments to chemically fight rust, whilst also forming a protective barrier. They have excellent adhesion properties and provide a sound base for topcoating. The range of Killrust colours in Gloss and Satin Enamel are designed to provide superior protection. A range of corrosion inhibiting enamels that provide a tough, flexible coating with excellent durability properties. A wide range of colours including factory tinted COLORBOND Killrust topcoats can be used indoors or outdoors and, with the correct primer/undercoat, can even be used on timber, brick, fibro, concrete and other surfaces. No primer is required for new or lightly rusted steel or iron surfaces. When metal protection really matters, you can always trust Killrust Wattyl Killrust 3

Killrust reparatory roducts Killrust Rust-Eeter A clear solution formula that neutralises rust and provides a suitable surface for priming and painting.

Killrust Rust-Eeter Description: A clear solution formula that provides a suitable surface for subsequent priming and painting Usage: Wrought iron and ferrous metal surfaces Application: Brush or

zinc rich, cold galvanising primer that provides long term, extra heavy duty corrosion protection. Killrust Cold Galvit encapsulates the metal in a zinc film.

4 Killrust reparatory roducts Killrust Rust-Eeter A clear solution formula that neutralises rust and provides a suitable surface for priming and painting. Killrust Rust-Eeter converts rust to stop corrosion and is suitable for use on wrought iron and ferrous metal surfaces. Killrust Rust-Eeter Description: A clear solution formula that provides a suitable surface for subsequent priming and painting Usage: Wrought iron and ferrous metal surfaces Application: Brush or spray gun Recoat: 24 hours Clean up: Killrust Cold Galvit Thinner Coverage: 10-12m 2 / Litre No of coats: 1 coat Available sizes: 200ml and 500ml Rusted Mild Steel Rust - Eeter Killrust Cold Galvit A zinc rich, cold galvanising primer that provides long term, extra heavy duty corrosion protection. Killrust Cold Galvit encapsulates the metal in a zinc film. The zinc coating repairs damaged surfaces. Ideal for use on clean, rust free steel in highly corrosive environments including coastal regions. It is also suitable for use on steel handrails, balustrading and other structural steelwork. Killrust Cold Galvit Description: A zinc rich cold galvanising primer Usage: Handrails, balustrading and other structural steelwork Application: Brush, roller, spray gun or Recoat: 24 hours Clean up: Killrust Cold Galvit Thinner Coverage: 9m 2 / Litre No of coats: 1 coat Available sizes: 250ml, 500ml, 1L, 4L and 375g Cold Galvit Killrust Fishoilene An anti-corrosive protective fluid for rusted steel where normal surface preparation and coating is difficult. Killrust Fishoilene creeps into cracks and crevices whilst forcing out air and moisture that cause rust. It is ideal for hard to reach areas including cracks, crevices, along pipes, nuts, bolts, hinges and welds. Killrust Fishoilene Description: An anti-corrosive protective fluid for rusted steel Usage: For areas where surface preparation and coating is difficult Application: Brush, roller, spray gun or Recoat: Allow 48 hours to semi dry* Clean up: Mineral turpentine Coverage: 12m 2 / Litre No of coats: 1 coat Available sizes: 500ml, 1L, 4L and 300g *Killrust Fishoilene is semi drying only and not recommended for topcoating Wrought iron gate prepared with Killrust Rust-Eeter 4 Wattyl Killrust

Killrust riming roducts Killrust Etch rimer A fast drying, anti-corrosive primer with excellent adhesion to non-ferrous metal surfaces with added inhibiting pigments to reduce damaging corrosion.

Killrust Etch rimer Description: A fast drying, anti-corrosive primer Usage: Non-ferrous metal surfaces including aluminium, brass, copper, stainless steel, zinc and lead Application: Brush, roller,

5 Killrust riming roducts Killrust Etch rimer A fast drying, anti-corrosive primer with excellent adhesion to non-ferrous metal surfaces with added inhibiting pigments to reduce damaging corrosion. Suitable for use on aluminium, brass, copper, stainless steel, zinc and lead surfaces. Ideal for use on aluminium windows, doors, gutters, fences, gates, railing and down pipes. Killrust Etch rimer Description: A fast drying, anti-corrosive primer Usage: Non-ferrous metal surfaces including aluminium, brass, copper, stainless steel, zinc and lead Application: Brush, roller, spray gun or Recoat: 1 hour Clean up: Methylated spirits Coverage: 10m 2 / Litre No of coats: 1 coat Available sizes: 500ml, 1L, 4L and 300g Etch rimer Killrust Heavy Duty rimer A high performance, anti-corrosive primer that forms a tough and flexible coating to resist corrosion even in harsh environments. The rust inhibiting pigments reduce damaging rust and corrosion. It is ideal for use on ferrous and non-ferrous metals including wrought iron, steel, ZINCALUME and galvanised iron. Suitable for use on roofs, wrought iron railings, gutters, down pipes and general structural steelwork. Killrust Heavy Duty rimer Description: A high performance, anti-corrosive primer Usage: Ferrous and non-ferrous metals including wrought iron and steel, ZINCALUME and galvanised iron Application: Brush, roller, spray gun or Recoat: 4 hours Clean up: Methylated spirits Coverage: 12m 2 / Litre No of coats: 1 coat Available sizes: 250ml, 500ml, 1L, 4L and 300g Wrought iron fence prepared with Killrust Heavy Duty rimer Heavy Duty rimer Wattyl Killrust 5

Killrust Topcoat roducts Killrust Epoxy Gloss Enamel An advanced anti-corrosive topcoat epoxy enamel that provides excellent durability and maximum metal protection: available in an attractive range

It is ideal for use on metal fences, gutters, gates, railings, and other general metal coating applications.

*Enamel paints yellow over time which may cause some colour variance when compared to acrylic paints, particularly in white based tones.

6 Killrust Topcoat roducts Killrust Epoxy Gloss Enamel An advanced anti-corrosive topcoat epoxy enamel that provides excellent durability and maximum metal protection: available in an attractive range of gloss finish colours or Matt Black finish. Killrust Epoxy Gloss Enamel can be applied directly onto new and lightly rusted steel and wrought iron surfaces without the need of a primer. It is ideal for use on metal fences, gutters, gates, railings, and other general metal coating applications. Killrust Epoxy Gloss Enamel White Base can be tinted to the full range of White based colours *. *Enamel paints yellow over time which may cause some colour variance when compared to acrylic paints, particularly in white based tones. Killrust Epoxy Gloss Enamel Description: An advanced anti-corrosive topcoat epoxy enamel Usage: Directly to new and lightly rusted steel and wrought iron or all suitably prepared and primed metal surfaces Application: Brush, roller, spray gun or Recoat: 16 hours Clean up: Mineral turpentine Coverage: 14m 2 / Litre No of coats: 2 coats Available sizes: 250ml, 500ml, 1L, 4L and 300g Victorian Garden Chair topcoated with Killrust Epoxy Gloss Enamel - Mid Brunswick Green Wrought Iron Gate topcoated with Killrust Epoxy Gloss Enamel - Black White Sourdough F18w / I100-C Cargo White B16w / F050-C Ethereal White B2w / F060-E Confetti Shower C9w / G100-C Monterey White A41w / B280-H Moondance B52w Surfmist A6w / L050-B Old apyrus Classic Cream A16w / L060-D A75w / J070-B Maltshake A42w / B200-H Sungold An additional finishing coat may be required. Authentic Heritage colour. Also available in Epoxy Gloss Enamel. Factory tinted, available on shelf. Tint bases: - White, - ewter, MB - Mission Brown, DR - Delicious Red, S - Sungold, DBG - Deep Brunswick Green, NUB - New Ultra Blue, O - Ocean. COLORBOND, BlueScope and colour names are registered trademarks of BlueScope Steel Limited. Colours approximate the COLORBOND pre-painted steel colours. Tennessee Dawn A65w / B300-I Deep Bronze Burnt Amber S S Moon Shell A80w / D060-I Shingle aperbark /Terrace A66w / L060-B Light Bronze Delicious Red S All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur. 6 Wattyl Killrust

7 Sateen Snow A63w / K030-D Kosciusko ebble A64w / J060-B Mission Brown A62w / L100-C Deep Indian Red C62w / L100-D DR Black (also available in Matt) Alta Sierra A43w / H090-A Grapevine Dusk ink Mink Brown Warm Chocolate MB owder White D18w / I100-A Scallopini A44w / K020-A To match COLORBOND Dune A45w / L090-D Fossil Dust Mousse Alabaster A8w / F110-F Gracieux A31w / D210-I To match COLORBOND Shale Grey A24w / L010-D Aluminium ewter Creamy Natural F17w / K010-A Soft Cream Breezy Day E54w / G040-D Bambusa A76w / J050-C Grass Canal Stoneleigh A78w / J070-C Bright Green Aqua S To match COLORBOND Wilderness /Willow F72w/L040-D Mid Brunswick Green Wedgewood DBG To match COLORBOND Woodland Grey /Grey Ridge A28w/L030-A Deep Brunswick Green F51w / L030-D Dark Teal o All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur. Simply Heaven E20w / D250-B New Ultra Blue Navigator O To match COLORBOND NUB Deep Ocean /Bluestone E50w / L020-D Ocean Wattyl Killrust 7

Killrust Satin Enamel is ideal for use on pre-coated metal surfaces where touching up and colour matching is required.

8 Killrust Satin Enamel A single pack, fast drying, satin enamel with an anti-corrosive formulation. It is designed with a satin sheen level, and factory tinted to match popular COLORBOND pre-coated steel colours. Killrust Satin Enamel is ideal for use on pre-coated metal surfaces where touching up and colour matching is required. It is available in an pack which means it is easy to use and equipment clean up isn t required. Available in a range of 20 standard COLORBOND colours. Garage doors and gutters touched up with Killrust Satin Enamel - ColoRbond Deep Ocean /Bluestone Killrust Satin Enamel Description: A single pack, fast drying satin enamel with an anti-corrosive formulation Usage: re-coated COLORBOND and other metal surfaces where touching up and colour matching is required Application: Aerosol Recoat: 1-8 hours Clean up: No equipment clean up required Coverage: 2m 2 / 300g No of coats: 2+ coats Available sizes: 300g Classic Cream A16w/L060-D Surfmist A6w/L050-B Windspray A26w/L020-B Domain B250-A Shale Grey A24w/L010-D Bushland /Teatree A84w/L030-B Harvest B260-D Evening Haze /Summershade F130-D ale Eucalypt /Meadow F73w/L040-C aperbark /Terrace A66w/L060-B Riversand B010-H Wilderness /Willow F72w/L040-D Dune A45w/L090-D Jasper B62w/L090-C Cottage Green /Evergreen F40w/L040-A All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur. Woodland Grey /Grey Ridge A28w/L030-A 8 Wattyl Killrust Ironstone A40w/L010-A Deep Ocean /Bluestone E50w/L020-D Monument /Hedge C310-A Nightsky A29w/L010-C

9 Killrust Roof aint A high quality, anti-corrosive roof paint that has been specifically formulated to protect exterior roof and structural surfaces. Its excellent durability combats excessive weather conditions and is also suitable for use in areas used for the collection of drinking water. Killrust Roof aint is also suitable for use on primed galvanised iron and pre-coated steel roof surfaces. Available in 5 factory tinted colours. Killrust Epoxy Roof aint Description: A high quality, anti-corrosive roof paint Usage: rimed galvanised iron and pre-coated steel roof surfaces Application: Brush, roller and spray gun Recoat: 24 hours Clean up: Mineral turpentine Coverage: 14m 2 / Litre No of coats: 1-2 coats Available sizes: 4L and 10L Roof Silver Roof Grey Roof Green Roof Red Roof Charcoal Killrust Hammered Metal Finish A decorative coating resembling hammered sheet metal that camouflages imperfect surfaces and hides unsightly dents, scratches and weld joints. Killrust Hammered Metal Finish can be used on imperfect metal surfaces, weld joints and equipment that have been pre-coated in a similar finish. It is available in an pack which means it is easy to use, less mess and no equipment clean up required. Available in 4 factory tinted colours. Killrust Hammered Metal Finish Description: A decorative coating resembling hammered sheet metal Usage: Imperfect metal surfaces or equipment that has been pre-coated in a similar finish Application: Aerosol Recoat: 1-8 hours Clean up: No equipment clean up required Coverage: 2m 2 / 300g No of coats: 2+ coats Available sizes: 300g Blue Ocean Satin Black Satin Black Charcoal Killrust High Heat Enamel Silver A fast drying, satin black finish which provides heat resistant protection to interior and exterior metal surfaces exposed to heat up to 650ºC. Killrust High Heat Enamel does not require a primer and is ideal for BBQ hoods and engine exhaust components. Killrust Woodstove Enamel *Killrust High Heat Enamel cannot be used over vitreous enamel coatings or on surfaces that come in direct contact with food. A fast drying, satin black finish which provides heat resistant protection to interior and exterior metal surfaces exposed to heat up to 650ºC. Killrust Woodstove Enamel does not require a primer and is ideal for slow combustion wood heaters, stovetops, fire pits, braziers and more. It is available in an pack which means there is less mess, easy to use and no equipment clean up required. **Killrust Woodstove Enamel cannot be used over vitreous enamel coatings or on surfaces that come in direct contact with food. Gunmetal Killrust High Heat Enamel Characteristics: A fast drying, satin black finish which provides heat resistant protection Use on: For BBQ hoods, engine exhaust components and more* Apply with: Aerosol Recoat: 1-8 hours Curing: Allow to dry for 1 hour, then cure by firing up the equipment to reach 300ºC for 1 hour or 2 hours at 200ºC Clean up: No equipment clean up required Coverage: 3m 2 / 340g No of coats: 1+ coats Available sizes: 340g Killrust Woodstove Enamel Characteristics: A fast drying, satin black finish which provides heat resistant protection Use on: For slow combustion wood heaters, stovetops, fire pits and braziers and more** Apply with: Aerosol Recoat: 1-8 hours Curing: Allow to dry for 1 hour, then cure by firing up the equipment to reach 300ºC for 1 hour or 2 hours at 200ºC Clean up: No equipment clean up required Coverage: 3m 2 / 340g No of coats: 1+ coats Available sizes: 340g Wattyl Killrust 9 All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur.

10 rotecting Metal Surfaces Using the Killrust System Metal Guide To achieve the best possible results, identify your surface type and condition and follow the recommended steps shown in the following chart SURFACE TYE CONDITION STEEL OR WROUGHT IRON New/Unpainted Clean surface to remove oil and grease STEEL OR WROUGHT IRON Rusted Wire brush, scrape or sand surface to remove rust and any loose, peeling or flaking paint Apply: KILLRUST RUSTEETER Apply: KILLRUST HEAVY DUTY RIMER GALVANISED IRON AND ZINCALUME New Clean surface to remove oil and grease Apply: KILLRUST HEAVY DUTY RIMER GALVANISED IRON AND ZINCALUME Weathered/ Non rusted Remove corrosion salts from surface with a stiff bristle brush or nylon scourer and water Apply: KILLRUST HEAVY DUTY RIMER ALUMINIUM BRASS, LEAD TIN, COER, AND STAINLESS STEEL Unpainted/Bare Remove all corrosion, peeling and flaking paint by wire brushing, scraping or sanding. Clean surface where possible to remove oil and grease Apply: KILLRUST ETCH RIMER Steel or Wrought Iron New/Unpainted in extreme conditions Clean surface to remove oil, grease and millscale Apply: KILLRUST COLD GALVIT Apply: KILLRUST HEAVY DUTY RIMER Steel or Wrought Iron Rusted/Unpainted in extreme conditions Remove all rust, peeling and flaking paint by wire brushing, scraping, sanding or grinding back to bright metal Apply: KILLRUST COLD GALVIT Apply: KILLRUST HEAVY DUTY RIMER REVIOUSLY AINTED SURFACES Good Condition Sand surface lightly until Gloss is removed; remove dust. Treat mould spots with bleach and rinse with clean water reviously ainted Surfaces oor/rusted Remove all rust, peeling and flaking paint by wire brushing, scraping, sanding or grinding back to bright metal Apply: KILLRUST HEAVY DUTY RIMER ALL METAL SURFACES Difficult to reach areas Wire brush, scrape or sand surface to remove rust and any loose, peeling or flaking paint Apply: KILLRUST FISHOILENE* * Fishoilene is semi drying only. Not recommended for topcoating. Apply: KILLRUST EOXY GLOSS ENAMEL Apply: KILLRUST EOXY GLOSS ENAMEL, SATIN ENAMEL OR HAMMERED METAL FINISH Apply: KILLRUST EOXY GLOSS ENAMEL, SATIN ENAMEL OR HAMMERED METAL FINISH Apply: KILLRUST EOXY GLOSS ENAMEL, SATIN ENAMEL OR HAMMERED METAL FINISH Apply: KILLRUST EOXY GLOSS ENAMEL, SATIN ENAMEL OR HAMMERED METAL FINISH Apply: KILLRUST EOXY GLOSS ENAMEL, SATIN ENAMEL OR HAMMERED METAL FINISH Apply: KILLRUST EOXY GLOSS ENAMEL, SATIN ENAMEL OR HAMMERED METAL FINISH Apply: KILLRUST EOXY GLOSS ENAMEL Apply: KILLRUST EOXY GLOSS ENAMEL 10 Wattyl Killrust

11 Killrust Quick roduct Reference Guide Killrust roduct Type Killrust roduct Killrust roduct Description No. of Coats Application Recoat Coverage Wash Up Sizes Rust-Eeter Cold Galvit Fishoilene Etch rimer Heavy Duty rimer Epoxy Gloss Enamel Satin Enamel Hammered Metal Finish Clear solution formula that treats rusted surfaces and provides a suitable surface for subsequent priming and painting. Zinc-rich cold galvanising primer to provide long term protection against corrosion. Anti-corrosive protective fluid for rusted steel where normal surface preparation and coating is difficult. Fast drying, anti-corrosive primer for non ferrous metal surfaces. High performance, anti-corrosive primer for ferrous and non ferrous metal surfaces. 1 coat 1 coat 1 coat 1 coat 1 coat Advanced anti-corrosive epoxy formula. 2 coats Single pack, fast drying satin enamel factory tinted to match popular COLORBOND pre-coated steel colours. Brush or spray gun Brush, roller, spray gun or Brush, roller, spray gun or Brush, roller, spray gun or Brush, roller, spray gun or Brush, roller, spray gun or 2+ coats Aerosol Decorative coating resembling hammered sheet metal. 2+ coats Aerosol 24 hours 24 hours 48 hours to semi dry* 1 hour 4 hours 16 hours 1-8 hours 1-8 hours 10-12m 2 / Litre 9m 2 / Litre 12m 2 / Litre 10m 2 / Litre 12m 2 / Litre 14m 2 / Litre 2m 2 / 300g 2m 2 / 300g Killrust Cold Galvit Thinner Killrust Cold Galvit Thinner Mineral Turpentine Methylated Spirits Methylated Spirits Mineral Turpentine No equipment clean up required No equipment clean up required 200ml & 500ml 250ml, 500ml, 1L, 4L & 375g 500ml, 1L, 4L & 300g 500ml, 1L, 4L & 300g 250ml, 500ml, 1L, 4L & 300g 250ml, 500ml, 1L, 4L & 300g 300g 300g High Heat Enamel Fast drying satin enamel which provides heat resistant protection to interior and exterior metal surfaces up to 650ºC for BBQ hoods, engine exhaust components and more. 1+ coats Aerosol 1 hour** 3m 2 / 340g No equipment clean up required 340g Woodstove Enamel Fast drying satin enamel which provides heat resistant protection to interior and exterior metal surfaces up to 650ºC for slow combustion wood heaters, stovetops, fire pits, braziers and more. 1+ coats Aerosol 1 hour** 3m 2 / 340g No equipment clean up required 340g Roof aint High quality, anti-corrosive roof paint. 1-2 coats Brush, roller or spray gun 24 hours 14m 2 / Litre Mineral Turpentine 4L & 10L * Killrust Fishoilene is not recommended for topcoating.** Allow Killrust High Heat Enamel and Woodstove Enamel to dry for 1 hour, then cure by firing up the equipment to reach 300ºC for 1 hour or 2 hours at 200ºC. Wattyl Killrust11

For stockist information, product enquiries and technical advice please visit our website or call our customer service and technical hotlines. AUSTRALIA hone 132 101 www.wattyl.com.

Variation in shade may occur. hotographic and printed images may not represent the true colour.

12 For stockist information, product enquiries and technical advice please visit our website or call our customer service and technical hotlines. AUSTRALIA hone NEW ZEALAND hone All printed colours have been matched as close to the actual paint colour as the printing process will allow. Variation in shade may occur. hotographic and printed images may not represent the true colour. Wattyl, Killrust, Rust-Eeter and Wattyl Colour Designer are registered trademarks of Wattyl Australia ty Limited. ABN ABN COLORBOND, ZINCALUME, and colour names are registered trade marks of BlueScope Steel Limited. rinted 01/12 CCKR007/WATKIL6 12 Wattyl Killrust

DULUX UNIVERSAL UNDERCOAT

DULUX UNIVERSAL UNDERCOAT TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT