Regulated Qualifications unit and Assessment Specification
|
|
- Darleen Owens
- 5 years ago
- Views:
Transcription
1 Regulated Qualifications unit and Assessment Specification Unit title Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques Regulator unit D/503/1453 code SQA unit code H2TC 53 SSC ref J4.15
2 History of changes Publication date: October 2012 Version: 02 (November 2017) Version Date Description Authorised by number 02 November 2017 Unit specification updated to reflect current Ofqual terminology. Qualifications Officer Scottish Qualifications Authority 2012, 2017 This publication may be reproduced in whole or in part for educational purposes provided that no profit is derived from reproduction and that, if reproduced in part, the source is acknowledged.
3 Regulated qualifications unit specification Title Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques Level 4 Credit value 31 Learning outcomes Assessment criteria The learner will: 1 Understand the theoretical concepts which apply to producing enamelled surfaces. The learner can: 1.1 Compare the methods that can be used to illustrate and communicate ideas for enamelling designs. 1.2 Critically compare the advanced etching techniques employed by the jewellery and silverware manufacturing industry. 2 Understand how to apply advanced enamelling techniques. 2.1 Describe the relevant enamelling requirements of a particular design. 2.2 Explain the appropriate fabrication process for a particular design. 2.3 Describe the specific hazards associated with enamelling procedures. 2.4 Describe how to prepare tools for cutting and carving including: setting up the gravers adjusting the length to suit the individuals hand size mounting the handles 2.5 Describe the finishing processes for both enamel and metal. 2.6 Describe the finishing processes for both enamel and metal. 2.7 Describe how matt and shiny finishes can be achieved. 2.8 Describe how to produce multiples of a particular design. 2.9 Compare the range of techniques can be used to assist with producing multiple designs. H2TC 53, Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques (level 4) 1
4 Learning outcomes The learner will: Assessment criteria The learner can: 2.10 Describe the common faults that may occur with a particular specification Describe how faults might be identified Describe the appropriate actions that should be implemented to resolve identified faults. 3 Be able to produce enamelled items using advanced techniques. 3.1 Produce enamelled items using a wide range of advanced enamelling procedures including: three dimensional shapes convex surfaces concave surfaces castings die stampings photo etched surfaces 3.2 Implement activity to repair and restore enamelled surfaces to a suitable standard. 3.3 Produce enamelled surfaces on a range of metals including: silver gold 3.4 Produce enamelled items using a range of advanced techniques including: cloisonneé champlevé basse-taille plique-á-jour use of foils 3.5 Produce multiples of a given design using: casting photo etching die-stamping H2TC 53, Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques (level 4) 2
5 Learning outcomes The learner will: Assessment criteria The learner can: 3.6 Check that the work completed is to an acceptable standard including: dimensionally accurate proportionally accurate meets specification accurate colour match 4 Be able to evaluate own activity to improve future performance. 4.1 Assess the relative success of the methods used to identify areas for improvement. 4.2 Evaluate industry research and information to identify where new methods can be used. 4.3 Develop conclusions as to how new methods can be improved. 4.4 Make recommendations as to how new methods might be effectively be implemented. H2TC 53, Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques (level 4) 3
6 Additional information about the unit Unit purpose and aim(s) This unit covers the skills and knowledge required to use different styles of enamelling to produce a decorated surface including the use of advanced techniques. Unit start date 1 October 2012 Details of the relationship between the unit and relevant National Occupational Standards (if appropriate) This unit is based on National Occupational Standards for level 4 Diploma in Jewellery Manufacturing. Details of the relationship between the unit and other standards or curricula (if appropriate) N/A Assessment requirements specified by a sector or regulatory body (if appropriate) Culture and Creative Skills Endorsement of the unit by a sector or other appropriate body (if required) N/A Location of the unit within the subject/sector classification system 9.2 Crafts, Creative Art and Design Name of the organisation submitting the unit City & Guilds Guided learning hours 96 H2TC 53, Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques (level 4) 4
7 Regulated qualifications assessment specification Assessment (evidence) requirements The learner should submit a technical journal/workbook, describing the following. Learning Outcome 1 A comparison of the methods that can be used to illustrate and communicated ideas for enamelling designs. A critical comparison of the advanced etching techniques employed by the jewellery and silverware manufacturing industry. Learning Outcome 2 The relevant enamelling requirements of a particular design. The specific hazards associated with enamelling procedures. How to prepare tools for cutting and carving including: setting up gravers adjusting graver length to suit the individuals hand size mounting the handles The finishing processes for both enamel and metal, how matt and shiny finishes can be achieved. How to produce multiples of a particular design and compare how a range of techniques can be used to assist with producing them. The common faults that may occur with a particular specification how they might be identified and appropriate actions that should be implemented to resolve them. Learning Outcome 3 Product evidence in the form of: Enamelled items using a wide variety of advanced techniques including: three dimensional shapes convex surfaces concave surfaces castings die stampings photo etched surfaces Enamelled surfaces on a range of metals including: gold silver Multiples of a given design using: casting photo etching die stamping H2TC 53, Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques (level 4) 5
8 Assessment (evidence) requirements (cont) The learner should also demonstrate the ability to implement repaired and restored enamelled surfaces to a suitable standard and check that the work is completed to an acceptable standard including: dimensionally accurate proportionally accurate meets specification accurate colour match Learning Outcome 4 Logbook/workbook showing that the learner has assessed the relative success of the methods used and identify areas for improvement. Evaluate industry research and information to identify where new methods can be used. Develop conclusions as to how new methods can be improved and make recommendations as to how new methods might be effectively implemented. Guidance on assessment Learning Outcome 1 Checklist for all the evidence requirements above. Learning Outcome 2 Checklist for all the evidence requirements above. Learning Outcome 3 Assessment checklist for product evidence and observation checklist of learner activity. Learning Outcome 4 Assessment checklist for learner evaluation and conclusions. H2TC 53, Produce Enamelled Surfaces for Precious Metal Objects Using Advanced Techniques (level 4) 6
Regulated Qualifications Unit and Assessment Specification
Regulated Qualifications Unit and Assessment Specification Unit title Produce Advanced Jewellery and Silverware Components Using Wax Casting Regulator unit M/503/1344 code SQA unit code H2T1 53 SSC ref
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Using and Communicating Technical Information M/600/5790 SQA Unit code FT2V 60 SSC Ref Unit 80 History of changes Publication date: March
More informationRegulated Qualifications Unit and Assessment Specification
Regulated Qualifications Unit and Assessment Specification Unit title Preparing and Using Lathes for Turning Operations Regulator unit R/616/7332 code SQA unit code FT2P 60 SSC ref Unit 76 History of changes
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Forming and Assembling Pipework Systems T/600/5855 SQA Unit code FT2X 60 SSC Ref Unit 82 History of changes Publication date: March 2012
More informationHigher National Unit specification. General information for centres. Jewellery: Hand Engraving Techniques. Unit code: F3Y4 35
Higher National Unit specification General information for centres Unit title: Jewellery: Hand Engraving Techniques Unit code: F3Y4 35 Unit purpose: This Unit enables candidates to develop the skills and
More informationRegulated Qualifications Unit and Assessment Specification
Regulated Qualifications Unit and Assessment Specification Unit title General Fabrication and Welding Applications Regulator unit D/616/6829 code SQA unit code FT2W 60 SSC ref Unit 81 History of changes
More informationProcess Operations: Oil and Gas Separation
National Unit specification: general information Unit code: FM3C 11 Superclass: YC Publication date: May 2011 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is designed for candidates
More informationThis Unit is suitable for learners who have limited or no experience of construction or of technical drawing.
National Unit specification General information Unit code: H66E 45 Superclass: TD Publication date: January 2014 Source: Scottish Qualifications Authority Version: 01 Unit purpose This Unit is designed
More informationArt and Design: Ceramics: Introduction to the Wheel (SCQF level 5)
National Unit Specification: general information Unit title: Art and Design: Ceramics: Introduction to the Wheel (SCQF Unit code F9VM 11 Superclass: JR Publication date: September 2010 Source: Scottish
More informationWhile entry is at the discretion of the centre, candidates would normally be expected to have attained one of the following, or equivalent:
National Unit Specification: general information CODE F5J6 12 SUMMARY This Unit introduces candidates to operational amplifiers. Knowledge and understanding will be developed through parameter description,
More informationWorking with Woodworking Machinery. Ofqual unit reference number (code) Organisation Reference A/507/2883. Unit Level Level 2. Unit Sub Level GLH 120
Unit Title Ofqual unit reference number (code) Organisation Reference Working with Woodworking Machinery A/507/2883 QU034494 Unit Level Level 2 Unit Sub Level None GLH 120 Unit Credit Value 15 Sector Subject
More informationUNIT Computer Aided Draughting (CAD) for Engineers (SCQF level 5)
National Unit Specification: general information CODE F5H4 11 SUMMARY This Unit may form part of a National Qualification Group Award or may be offered on a free standing basis. This largely practical
More informationPreparing and using Lathes for Turning Operations SQA code HC3F 04. SCQF level 5. SCQF credit points 29
Unit title Preparing and using Lathes for Turning Operations SQA code HC3F 04 SCQF level 5 SCQF credit points 29 History of changes Publication date: March 2016 Version: 01 Version number Date Description
More informationSetting broaching machines for production
Unit 326 Setting broaching machines for production UAN: Level: 3 Credit value: 78 GLH: 175 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: L/600/5490 This unit
More informationStringed Instruments: Manufacture of an Instrument Neck (SCQF level 5)
National Unit specification: general information Unit code: FX3C 11 Superclass: LJ Publication date: October 2011 Source: Scottish Qualifications Authority Version: 01 Summary The purpose of this Unit
More informationUNIT Art and Design: Digital Media (SCQF level 6)
National Unit Specification: general information CODE F5CH 12 SUMMARY This Unit is designed to enable the candidate to explore and develop skills in digital media related to art and design disciplines.
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 8350164 -Session- 1994-95 -Superclass- -Title- JC DESIGN STUDIES: INTRODUCTION
More informationBench Skills 2 Wood Carcase Construction (Intermediate 2)
National Unit Specification: general information UNIT NUMBER D183 11 Bench Skills 2 Wood Carcase Construction (Intermediate 2) COURSE Woodworking Skills (Intermediate 2) SUMMARY Applying practical skills
More informationUNIT Earthing and Earth Fault Current Protection (SCQF level 6)
National Unit Specification: general information CODE F5HD 12 SUMMARY This Unit is intended for candidates with little or no prior knowledge of earthing systems for electrical installations, and the protection
More informationDesign and Manufacture: Materials and Manufacturing (Higher) Unit. level 6 (9 SCQF credit points)
Design and Manufacture: Materials and Manufacturing (Higher) Unit SCQF: level 6 (9 SCQF credit points) Unit code: H22V 76 Unit outline The general aim of this Unit is to develop the learner s knowledge
More informationPractical Woodworking: Machining and Finishing (National 4) level 4 (6 SCQF credit points)
Practical Woodworking: Machining and Finishing (National 4) SCQF: level 4 (6 SCQF credit points) Unit code: H25X 74 Unit outline The general aim of this Unit is for learners to develop practical skills
More informationNational Unit Specification: General Information
National Unit Specification: General Information UNIT Multimedia Computing: Introduction to Digital Photography (Intermediate 2) NUMBER 8110178 COURSE SUMMARY Using a digital camera and related computer
More informationUNIT Fundamental Electronics (SCQF level 6)
National Unit Specification: general information CODE F5DB 12 SUMMARY This Unit introduces candidates to the principal devices used in electronics and to the principles of their operation, function and
More informationTest criteria The learner can:
Title: Know how to produce specialist decorative finishes 2 Level: 2 Credit value: 3 Learning outcome The learner will: 1. know how to produce quality finish ground coats for painted decorative work 2.
More informationEUROPASS SUPPLEMENT TO THE DIPLOMA OF
EUROPASS SUPPLEMENT TO THE DIPLOMA OF NAME OF THE DIPLOMA Técnico Superior en Artes Plásticas y Diseño en Técnicas Escultóricas en Madera (Diploma of Higher Education in Plastic Arts and Design in Wood
More informationProducing mechanical engineering drawings using a CAD system
Unit 804 Producing mechanical engineering drawings using a CAD system UAN: J/600/5794 Level: Level 2 Credit value: 11 GLH: 61 Relationship to NOS: This unit has been derived from national occupational
More informationMachining components using vertical boring machines
Unit 319 Machining components using vertical boring machines UAN: Level: 3 Credit value: 77 GLH: 161 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: Y/600/5430
More informationUnit Title: Undertake Colour Management Procedures
Unit Credit Value: 6 Unit Level: Three Unit Guided Learning Hours: 50 Ofqual Unit Reference Number: M/600/9001 Unit Review Date: 31/12/2016 Unit Sector: 9.3 Media and Communication Unit Summary In this
More informationGarment Design for Manufacture: An Introduction (SCQF level 6)
National Unit specification: general information Garment Design for Manufacture: An Introduction (SCQF level 6) Unit code: FP56 12 Superclass: JK Publication date: September 2011 Source: Scottish Qualifications
More informationlevel 5 (6 SCQF credit points)
Practical Woodworking: Flat-frame Construction (National 5) SCQF: level 5 (6 SCQF credit points) Unit code: H25V 75 Unit outline The general aim of this Unit is for learners to develop practical skills
More informationProducing and finishing holes using drilling machines
Unit 336 Producing and finishing holes using drilling machines UAN: Level: 3 Credit value: 14 GLH: 56 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: Y/601/2264 This unit has been
More informationUNIT Media: Radio Music Programme Production (SCQF level 5)
National Unit Specification: general information CODE F58D 11 SUMMARY The purpose of this Unit is to enable candidates to develop the knowledge and skills involved in producing and presenting a radio music
More informationUNIT Construction Crafts: Bench Joinery (Intermediate 2)
National Unit Specification: general information CODE DX0J 11 COURSE Construction Crafts (Intermediate 2) SUMMARY This Unit is a mandatory Unit within the Intermediate 2 Construction Crafts Course and
More informationKnow how to apply hangings to walls and ceilings. Test criteria The learner can:
Title: Know how to apply hangings to walls and ceilings Level: 3 Credit value: 7 Learning outcome The learner will: 1. describe methods used in wallpaper production and the trimming and jointing methods
More informationNational Unit Specification: General Information
National Unit Specification: General Information UNIT Ceramics: Introduction to Hand-Building (Intermediate 2) NUMBER D944 11 COURSE SUMMARY This unit is designed to introduce the candidate to hand-built
More informationNational Unit specification: general information. Process Operations: Utilities. Unit code: FM3E 11. Summary. Superclass: Publication date: May 2011
National Unit specification: general information Unit code: FM3E 11 Superclass: YB Publication date: May 2011 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is designed for candidates
More informationIt is suitable for a range of candidates with an interest in furniture making and related industries.
National Unit specification: general information Unit code: H3MK 11 Superclass: JP Publication date: April 2013 Source: Scottish Qualifications Authority Version: 02 Summary This Unit has been designed
More informationPreparing and using milling machines
Unit 012 Preparing and using milling machines Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a broad
More informationConstructing Knitted Garments Unit Level: Unit Credit Value: 3 GLH: 27 AIM Awards Unit Code: JK7/1/EA/001 Unique Reference A/504/9989
Unit Code: JK7/1/EA/001 This unit has 4 learning outcomes LEARNING OUTCOMES The learner will: 1. Be able to prepare to construct a knitted garment ASSESSMENT CRITERIA The learner can: 1.1. Select pattern
More information1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)
Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This
More informationNational Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 8210014 -Session- 1994-95 -Superclass- VF -Title- DRAWING SKILLS: TECHNICAL DRAUGHTING
More informationAudio Visual: Multimedia Digital Slide Production
Higher National Unit specification General information for centres Unit code: F1TL 34 Unit purpose: This Unit will provide candidates with the knowledge and skills necessary to produce a multi image digital
More informationHigher National Unit specification. General information for centres. Photography: Darkroom Techniques. Unit code: DW81 34
Higher National Unit specification General information for centres Unit title: Photography: Darkroom Techniques Unit code: DW81 34 Unit purpose: This Unit is designed to enable the candidate to research,
More informationSetting vertical boring machines for production
Unit 318 Setting vertical boring machines for production UAN: Level: 3 Credit value: 91 GLH: 210 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: F/600/5423 This
More informationHigher National Unit specification: general information
Higher National Unit specification: general information Unit code: H17R 35 Superclass: CB Publication date: March 2012 Source: Scottish Qualifications Authority Version: 01 Unit purpose This Unit is designed
More information1. Qualification specification
Qualification title: OAL Level 2 NVQ in Woodmachining Qualification number (QN): 603/0213/6 1. Qualification specification 1.1. Qualification purpose This qualification is designed to develop and assess
More informationUNIT Photography: Portraiture Skills (SCQF level 6)
National Unit Specification: general information CODE F51P 12 SUMMARY This Unit is designed to enable the candidate to research styles of photographic portraits from both historical and contemporary periods
More informationMultimedia Computing: Introduction to Digital Photography (SCQF level 5)
National Unit Specification: general information CODE D0F7 11 SUMMARY Use a digital camera and related computer software within the context of multimedia computing. OUTCOMES 1 Describe the principles of
More informationEntry 3 Skills for Working Life ( )
Entry 3 Skills for Working Life (4807-03) August 2014 Version 1.0 www.cityandguilds.com August 2014 Version 1.0 Unit recording documents for Pottery (Units 391-395) City & Guilds Believe you can www.cityandguilds.com
More informationPreparing and using CNC milling machines
Unit 016 Preparing and using CNC milling machines Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
More informationLevel: 3 Credit value: 9
Level: 3 Credit value: 9 UAN: J/602/2563 Unit aim This unit is designed to enable learners to understand and interpret the principles, practices and legislation associated with the termination and connection
More informationTelevision Scriptwriting: Non-Factual Programmes
Higher National Unit Specification General information for centres Unit code: F45S 35 Unit purpose: The purpose of this Unit is to provide candidates with the knowledge and/or skills necessary to produce
More informationPreparing and using CNC Machining Centres F/508/4727
Unit Title Ofqual unit reference number (code) Organisation Reference Preparing and using CNC Machining Centres F/508/4727 QU051501 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
More informationQPEO2/003N Credit Value: 4 QCF Level: 2 GLH: 29 Using and communicating technical information
Performing Engineering Operations QPEO2/003N Credit Value: 4 QCF Level: 2 GLH: 29 Using and communicating technical information Learner Name: EAL Assessment Route Summary This EAL assessment route covers
More informationHigher National Unit specification. General information. Unit title: CAD: Principles (SCQF level 7) Unit code: DW Unit purpose.
Higher National Unit specification General information Unit code: DW16 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (July 2016) Unit purpose This
More informationArrangements for: National Certificate in. Stringed Musical Instrument Making. And Repair. at SCQF Level 6. Group Award Code: (GF6Y 46)
Arrangements for: National Certificate in Stringed Musical Instrument Making And Repair at SCQF Level 6 Group Award Code: (GF6Y 46) Validation date: June 202 Date of original publication: Version: 0 Acknowledgement
More informationEngineering Drawing Office Practice; Graphical Engineering Communication Engineering Draughting Skills; Introduction to CAD/CAM or similar Unit
Higher National Unit Specification General information for centres Unit title: Engineering Drawing Unit code: DR1W 34 Unit purpose: This Unit is designed to enable candidates to gain knowledge of current
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 8170074 -Session-1994-95 -Superclass- KE -Title- PHOTOGRAPHY: INTRODUCTION TO
More informationNational Unit Specification: General Information
National Unit Specification: General Information NUMBER 3240248 COURSE SUMMARY Producing a basic block and manipulating it to a variety of full scale patterns as well as cutting and manufacturing own design
More informationLevel 3 Diploma in Design and Craft
Level 3 Diploma in Design and Craft 7716-74 Ceramics Qualification handbook www.cityandguilds.com November 2009 Version 1.0 Candidate name City & Guilds registration number Centre name Centre number Date
More informationDesign and Craft qualifications and the new Creative Techniques craft pathways
Design and Craft qualifications and the new Creative Techniques craft s This document is to be used as guidance to centres when applying for fast track approval to the new Creative Techniques qualification
More informationHigher National Unit specification. General information for centres. Unit code: F1MM 34
Higher National Unit specification General information for centres Unit title: Landscape Graphics Unit code: F1MM 34 Unit purpose: This Unit aims to allow students to gain practical graphic skills, which
More informationModel Curriculum. Wax Setter (Basic) GEM & JEWELLERY CAST AND DIAMONDS -SET JEWELLERY WAX-SETTING G&J/Q2703, VERSION 1.0 3
Model Curriculum Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEM & JEWELLERY CAST AND DIAMONDS -SET JEWELLERY WAX-SETTING G&J/Q2703, VERSION 1.0 3 TABLE OF CONTENTS 1. Curriculum
More informationPreparing and Using Grinding Machines. Ofqual unit reference number (code) Organisation Reference F/508/4694. Unit Level Level 2.
Unit Title Ofqual unit reference number (code) Organisation Reference Preparing and Using Grinding Machines F/508/4694 QU051493 Unit Level Level 2 Unit Sub Level None GLH 68 Unit Credit Value 15 Sector
More informationHigher National Unit specification. General information for centres. Photography: Photojournalism. Unit code: DW8A 35
Higher National Unit specification General information for centres Unit title: Photography: Photojournalism Unit code: DW8A 35 Unit purpose: The Unit is designed to enable the candidate to research, produce,
More informationMachining components using centre lathes
Unit 305 Machining components using centre lathes UAN: Level: 3 Credit value: 77 GLH: 161 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: A/600/5386 This unit
More informationPreparing and using CNC machining centres
Unit 017 Preparing and using CNC machining centres Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit number- D2WH 04 -Unit title- CARPENTRY AND JOINERY: TIMBER STAIRS WITH TAPERED STEPS -Superclass category-
More informationTraditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector
Traditional Building Skills Training, Qualifications & Competency in the Built Heritage Sector Seamus Hanna Specialist Projects & Development Manager CITB-ConstructionSkills Three Areas Covered: Traditional
More informationLevel 3 Certificate in Design and Craft
Level 3 Certificate in Design and Craft 7716-80 Picture and frame restoration Qualification handbook www.cityandguilds.com November 2009 Version 1.0 Candidate name City & Guilds registration number Centre
More informationLevel 1 VRQ Qualifications in Photo Imaging (7512) Assessment pack
Level 1 VRQ Qualifications in Photo Imaging (7512) Assessment pack www.cityandguilds.com May 2012 Version 1.1 About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications,
More informationArchitectural Design Sketching and Drawing
Higher National Unit Specification General information for centres Unit title: Architectural Design Sketching and Drawing Unit code: DW3R 34 Unit purpose: This Unit is designed to enable the candidate
More informationArt and Design Portfolio General assessment information
Art and Design Portfolio General assessment information This pack contains general assessment information for centres preparing candidates for the portfolio Component of Higher Art and Design Course assessment.
More informationLevel 2 Award, Certificate and Diploma in Creative Techniques [7112] Level 2 Floral units
Level 2 Award, Certificate and Diploma in Creative Techniques [7112] Level 2 Floral units www.cityandguilds.com March 2011 Version 2.4 About City & Guilds City & Guilds is the UK s leading provider of
More informationNational Unit Specification: general information. UNIT Working with Wood: Hobbies (Intermediate 1) NUMBER D6DK 10 COURSE
National Unit Specification: general information NUMBER D6DK 10 COURSE SUMMARY This unit will be suitable for candidates having limited experience of working with woodworking hand tools and associated
More informationVOCATIONAL EDUCATION AND TRAINING STANDARD FOR A FINE METALWARE MANUFACTURER
THE REPUBLIC OF LITHUANIA MINISTRY OF EDUCATION AND SCIENCE MINISTRY OF SOCIAL SECURITY AND LABOUR VOCATIONAL EDUCATION AND TRAINING STANDARD FOR A FINE METALWARE MANUFACTURER Vocational education level
More informationActivity Tourism and Special Interest Pursuits: An Introduction (SCQF level 6)
National Unit specification: general information Unit code: H0BD 12 Superclass: NK Publication date: January 2012 Source: Scottish Qualifications Authority Version: 02 Summary This Unit is primarily intended
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION AUGUST
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit number- 4670968 -Unit title- -Superclass category- -Date of publication- (month and year) -Originating
More informationSystematic Collection of Critical Information for Mountings - Brooch
Systematic Collection of Critical Information for Mountings - Brooch Inspection Date: Mounting Attributes: Style & Design Description: Outline Shape / Design: Round Oval Triangle Square Diamond Heart Rectangle
More informationNational Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
More informationGCSE Subject Criteria for Art and Design
GCSE Subject Criteria for Art and Design September 2011 Ofqual/11/5087 Contents The criteria... 3 Introduction... 3 Aims and learning outcomes... 3 Subject content... 4 Titles and endorsements... 5 Assessment
More informationQuestion Paper Brief. National 5 Art and Design Course C This edition: December 2015 (version 1.0)
Question Paper Brief National 5 Art and Design Course C704 75 This edition: December 2015 (version 1.0) This document may be reproduced in whole or in part for educational purposes provided that no profit
More informationModel Curriculum. Engraving Artisan
Model Curriculum SECTOR: HANDICRAFTS AND CARPET SUB-SECTOR: Handicrafts (Bamboo Handicrafts) OCCUPATION: REF ID: HCS/Q 2902, V1.0 NSQF LEVEL: 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites
More information2D visual communication
2D visual communication UV21365 L/502/4823 Learner name: VRQ Learner number: VTCT is the specialist awarding body for the Hairdressing, Beauty Therapy, Complementary Therapy, Hospitality and Catering and
More informationLevel 2 Award, Certificate and Diploma in Creative Techniques [7112] Level 2 Balloon Artistry units
Level 2 Award, Certificate and Diploma in Creative Techniques [7112] Level 2 Balloon Artistry units www.cityandguilds.com March 2011 Version 2.4 About City & Guilds City & Guilds is the UK s leading provider
More informationModel Curriculum. Crochet Lace Tailor SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Crochet Lace Tailor HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE TAILOR HCS/Q7705, V1.0 3 Crochet Lace Tailor 1 SSC Logo
More informationLevel 1 Certificate in Design and Craft
Level 1 Certificate in Design and Craft 7716-18 Machine embroidery Qualification handbook www.cityandguilds.com June 2009 Version 1.0 Candidate name City & Guilds registration number Centre name Centre
More informationAPPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY
APPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY JULY 2016 Contents Page number Introduction 1 Subject aims and objectives 2 Subject content 3 Core technical principles 3 Core designing and
More informationComputer Aided Draughting for Engineers
Higher National Unit Specification General information for centres Unit title: Computer Aided Draughting for Engineers Unit code: DR1X 34 Unit purpose: This Unit has been designed to enable candidates
More informationSystematic Collection of Critical Information for Mountings - Pendants
Systematic Collection of Critical Information for Mountings - Pendants Inspection Date: Weights & Measurements: Mounting Attributes: Style & Design Description: Weight: Scales Used: Grams or Penny Weight
More information-SQA- SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
-SQA- SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit Number- 8411894 -Superclass- CA -Title- MICROCONTROLLERS: ARCHITECTURE, PROGRAMMING AND APPLICATIONS
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.0 3 TABLE OF CONTENTS Curriculum Trainer Prerequisites 01 05 3. Annexure:
More informationEntry 3 Skills for Working Life ( )
Entry 3 Skills for Working Life (4807-03) August 2014 Version 1.0 www.cityandguilds.com August 2014 Version 1.0 Unit recording documents for Painting and decorating (Units 401-405) City & Guilds Believe
More informationLevel 2 Certificate in Design and Craft
Level 2 Certificate in Design and Craft 7716-35 Jewellery Qualification handbook www.cityandguilds.com June 2009 Version 1.0 Candidate name City & Guilds registration number Centre name Centre number Date
More informationModel Curriculum. Wax Setter (Basic) Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL:
Model Curriculum Wax Setter (Basic) Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: Gem & Jewellery Cast and diamonds -Set Jewellery Wax-Setting G&J/Q2703, Version 1.0 3 Format:
More informationLevel 1 Certificate in Design and Craft
Level 1 Certificate in Design and Craft 7716-76 Bead needle weaving Qualification handbook www.cityandguilds.com November 2009 Version 1.0 Candidate name City & Guilds registration number Centre name Centre
More informationPreparing and using lathes for turning operations
Unit 011 Preparing and using lathes for turning Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationProducing platework components and assemblies
Unit 823 Producing platework components and assemblies UAN: R/600/5880 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: This unit has been derived
More informationSystematic Collection of Critical Information for Mountings - Rings
Systematic Collection of Critical Information for Mountings - Rings Inspection Date: Mounting Attributes: Style & Design Description: Solitaire Cathedral Style Solitaire Anniversary Band Eternity Band
More information